W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the Multi-Protocol Over ATM (MPOA) driver.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240208164244.3818498-3-leitao@debian.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the XFRM interface drivers.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240208164244.3818498-2-leitao@debian.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There is a crash when adding one of the lan966x interfaces under a lag
interface. The issue can be reproduced like this:
ip link add name bond0 type bond miimon 100 mode balance-xor
ip link set dev eth0 master bond0

The reason is because when adding a interface under the lag it would go
through all the ports and try to figure out which other ports are under
that lag interface. And the issue is that lan966x can have ports that are
NULL pointer as they are not probed. So then iterating over these ports
it would just crash as they are NULL pointers.
The fix consists in actually checking for NULL pointers before accessing
something from the ports. Like we do in other places.

Fixes: cabc9d49 ("net: lan966x: Add lag support for lan966x")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240206123054.3052966-1-horatiu.vultur@microchip.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

While testing tdc with parallel tests for mirred to block we caught an
intermittent bug. The blockid was being zeroed out when a net device
was deleted and, thus, giving us an incorrect blockid value whenever
we tried to dump the mirred action. Since we don't increment the block
refcount in the control path (and only use the ID), we don't need to
zero the blockid field whenever a net device is going down.

Fixes: 42f39036 ("net/sched: act_mirred: Allow mirred to block")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20240207222902.1469398-1-victor@mojatatu.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Aaron Conole says:

====================
net: openvswitch: limit the recursions from action sets

Open vSwitch module accepts actions as a list from the netlink socket
and then creates a copy which it uses in the action set processing.
During processing of the action list on a packet, the module keeps a
count of the execution depth and exits processing if the action depth
goes too high.

However, during netlink processing the recursion depth isn't checked
anywhere, and the copy trusts that kernel has large enough stack to
accommodate it.  The OVS sample action was the original action which
could perform this kinds of recursion, and it originally checked that
it didn't exceed the sample depth limit.  However, when sample became
optimized to provide the clone() semantics, the recursion limit was
dropped.

This series adds a depth limit during the __ovs_nla_copy_actions() call
that will ensure we don't exceed the max that the OVS userspace could
generate for a clone().

Additionally, this series provides a selftest in 2/2 that can be used to
determine if the OVS module is allowing unbounded access.  It can be
safely omitted where the ovs selftest framework isn't available.
====================

Link: https://lore.kernel.org/r/20240207132416.1488485-1-aconole@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add a test case into the netlink checks that will show the number of
nested action recursions won't exceed 16.  Going to 17 on a small
clone call isn't enough to exhaust the stack on (most) systems, so
it should be safe to run even on systems that don't have the fix
applied.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240207132416.1488485-3-aconole@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The ovs module allows for some actions to recursively contain an action
list for complex scenarios, such as sampling, checking lengths, etc.
When these actions are copied into the internal flow table, they are
evaluated to validate that such actions make sense, and these calls
happen recursively.

The ovs-vswitchd userspace won't emit more than 16 recursion levels
deep.  However, the module has no such limit and will happily accept
limits larger than 16 levels nested.  Prevent this by tracking the
number of recursions happening and manually limiting it to 16 levels
nested.

The initial implementation of the sample action would track this depth
and prevent more than 3 levels of recursion, but this was removed to
support the clone use case, rather than limited at the current userspace
limit.

Fixes: 798c1661 ("openvswitch: Optimize sample action for the clone use cases")
Signed-off-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240207132416.1488485-2-aconole@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Ido Schimmel says:

====================
selftests: forwarding: Various fixes

Fix various problems in the forwarding selftests so that they will pass
in the netdev CI instead of being ignored. See commit messages for
details.
====================

Link: https://lore.kernel.org/r/20240208155529.1199729-1-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The redirection test case fails in the netdev CI on debug kernels
because an FDB entry is learned despite the presence of a tc filter that
redirects incoming traffic [1].

I am unable to reproduce the failure locally, but I can see how it can
happen given that learning is first enabled and only then the ingress tc
filter is configured. On debug kernels the time window between these two
operations is longer compared to regular kernels, allowing random
packets to be transmitted and trigger learning.

Fix by reversing the order and configure the ingress tc filter before
enabling learning.

[1]
[...]
 # TEST: Locked port MAB redirect                                      [FAIL]
 # Locked entry created for redirected traffic

Fixes: 38c43a1c ("selftests: forwarding: Add test case for traffic redirection from a locked port")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240208155529.1199729-5-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Suppress the following grep warnings:

[...]
INFO: # Port group entries configuration tests - (*, G)
TEST: Common port group entries configuration tests (IPv4 (*, G))   [ OK ]
TEST: Common port group entries configuration tests (IPv6 (*, G))   [ OK ]
grep: warning: stray \ before /
grep: warning: stray \ before /
grep: warning: stray \ before /
TEST: IPv4 (*, G) port group entries configuration tests            [ OK ]
grep: warning: stray \ before /
grep: warning: stray \ before /
grep: warning: stray \ before /
TEST: IPv6 (*, G) port group entries configuration tests            [ OK ]
[...]

They do not fail the test, but do clutter the output.

Fixes: b6d00da0 ("selftests: forwarding: Add bridge MDB test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240208155529.1199729-4-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

After enabling a multicast querier on the bridge (like the test is
doing), the bridge will wait for the Max Response Delay before starting
to forward according to its MDB in order to let Membership Reports
enough time to be received and processed.

Currently, the test is waiting for exactly the default Max Response
Delay (10 seconds) which is racy and leads to failures [1].

Fix by reducing the Max Response Delay to 1 second.

[1]
 [...]
 # TEST: IPv4 host entries forwarding tests                            [FAIL]
 # Packet locally received after flood

Fixes: b6d00da0 ("selftests: forwarding: Add bridge MDB test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240208155529.1199729-3-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

After enabling a multicast querier on the bridge (like the test is
doing), the bridge will wait for the Max Response Delay before starting
to forward according to its MDB in order to let Membership Reports
enough time to be received and processed.

Currently, the test is waiting for exactly the default Max Response
Delay (10 seconds) which is racy and leads to failures [1].

Fix by reducing the Max Response Delay to 1 second.

[1]
 [...]
 # TEST: L2 miss - Multicast (IPv4)                                    [FAIL]
 # Unregistered multicast filter was hit after adding MDB entry

Fixes: 8c33266a ("selftests: forwarding: Add layer 2 miss test cases")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240208155529.1199729-2-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The test toggles the carrier of a bridge port in order to test the
bridge backup port feature.

Due to the linkwatch delayed work the carrier change is not always
reflected fast enough to the bridge driver and packets are not forwarded
as the test expects, resulting in failures [1].

Fix by busy waiting on the bridge port state until it changes to the
desired state following the carrier change.

[1]
 # Backup port
 # -----------
 [...]
 # TEST: swp1 carrier off                                              [ OK ]
 # TEST: No forwarding out of swp1                                     [FAIL]
 [  641.995910] br0: port 1(swp1) entered disabled state
 # TEST: No forwarding out of vx0                                      [ OK ]

Fixes: b4084530 ("selftests: net: Add bridge backup port and backup nexthop ID test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240208123110.1063930-1-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The reuseport_addr_any.sh is currently skipping DCCP tests and
pmtu.sh is skipping all the FOU/GUE related cases: add the missing
options.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/38d3ca7f909736c1aef56e6244d67c82a9bba6ff.1707326987.git.pabeni@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Command example string is not read as command.
Fix command annotation.

Fixes: a8ce7b26 ("devlink: Expose port function commands to control migratable")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240206161717.466653-1-parav@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Do not report the XDP capability NETDEV_XDP_ACT_XSK_ZEROCOPY as the
bonding driver does not support XDP and AF_XDP in zero-copy mode even
if the real NIC drivers do.

Note that the driver used to report everything as supported before a
device was bonded. Instead of just masking out the zero-copy support
from this, have the driver report that no XDP feature is supported
until a real device is bonded. This seems to be more truthful as it is
the real drivers that decide what XDP features are supported.

Fixes: cb9e6e58 ("bonding: add xdp_features support")
Reported-by: Prashant Batra <prbatra.mail@gmail.com>
Link: https://lore.kernel.org/all/CAJ8uoz2ieZCopgqTvQ9ZY6xQgTbujmC6XkMTamhp68O-h_-rLg@mail.gmail.com/T/Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20240207084737.20890-1-magnus.karlsson@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Recently, handshake_req_destroy_test1 started failing:

Expected handshake_req_destroy_test == req, but
    handshake_req_destroy_test == 0000000000000000
    req == 0000000060f99b40
not ok 11 req_destroy works

This is because "sock_release(sock)" was replaced with "fput(filp)"
to address a memory leak. Note that sock_release() is synchronous
but fput() usually delays the final close and clean-up.

The delay is not consequential in the other cases that were changed
but handshake_req_destroy_test1 is testing that handshake_req_cancel()
followed by closing the file actually does call the ->hp_destroy
method. Thus the PTR_EQ test at the end has to be sure that the
final close is complete before it checks the pointer.

We cannot use a completion here because if ->hp_destroy is never
called (ie, there is an API bug) then the test will hang.

Reported by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/netdev/ZcKDd1to4MPANCrn@tissot.1015granger.net/T/#mac5c6299f86799f1c71776f3a07f9c566c7c3c40
Fixes: 4a0f07d7 ("net/handshake: Fix memory leak in __sock_create() and sock_alloc_file()")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/170724699027.91401.7839730697326806733.stgit@oracle-102.nfsv4bat.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

I managed to hit following use after free warning recently:

[ 2169.711665] ==================================================================
[ 2169.714009] BUG: KASAN: slab-use-after-free in __run_timers.part.0+0x179/0x4c0
[ 2169.716293] Write of size 8 at addr ffff88812b326a70 by task swapper/4/0

[ 2169.719022] CPU: 4 PID: 0 Comm: swapper/4 Not tainted 6.8.0-rc2jiri+ #2
[ 2169.720974] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 2169.722457] Call Trace:
[ 2169.722756]  <IRQ>
[ 2169.723024]  dump_stack_lvl+0x58/0xb0
[ 2169.723417]  print_report+0xc5/0x630
[ 2169.723807]  ? __virt_addr_valid+0x126/0x2b0
[ 2169.724268]  kasan_report+0xbe/0xf0
[ 2169.724667]  ? __run_timers.part.0+0x179/0x4c0
[ 2169.725116]  ? __run_timers.part.0+0x179/0x4c0
[ 2169.725570]  __run_timers.part.0+0x179/0x4c0
[ 2169.726003]  ? call_timer_fn+0x320/0x320
[ 2169.726404]  ? lock_downgrade+0x3a0/0x3a0
[ 2169.726820]  ? kvm_clock_get_cycles+0x14/0x20
[ 2169.727257]  ? ktime_get+0x92/0x150
[ 2169.727630]  ? lapic_next_deadline+0x35/0x60
[ 2169.728069]  run_timer_softirq+0x40/0x80
[ 2169.728475]  __do_softirq+0x1a1/0x509
[ 2169.728866]  irq_exit_rcu+0x95/0xc0
[ 2169.729241]  sysvec_apic_timer_interrupt+0x6b/0x80
[ 2169.729718]  </IRQ>
[ 2169.729993]  <TASK>
[ 2169.730259]  asm_sysvec_apic_timer_interrupt+0x16/0x20
[ 2169.730755] RIP: 0010:default_idle+0x13/0x20
[ 2169.731190] Code: c0 08 00 00 00 4d 29 c8 4c 01 c7 4c 29 c2 e9 72 ff ff ff cc cc cc cc 8b 05 9a 7f 1f 02 85 c0 7e 07 0f 00 2d cf 69 43 00 fb f4 <fa> c3 66 66 2e 0f 1f 84 00 00 00 00 00 65 48 8b 04 25 c0 93 04 00
[ 2169.732759] RSP: 0018:ffff888100dbfe10 EFLAGS: 00000242
[ 2169.733264] RAX: 0000000000000001 RBX: ffff888100d9c200 RCX: ffffffff8241bd62
[ 2169.733925] RDX: ffffed109a848b15 RSI: 0000000000000004 RDI: ffffffff8127ac55
[ 2169.734566] RBP: 0000000000000004 R08: 0000000000000000 R09: ffffed109a848b14
[ 2169.735200] R10: ffff8884d42458a3 R11: 000000000000ba7e R12: ffffffff83d7d3a0
[ 2169.735835] R13: 1ffff110201b7fc6 R14: 0000000000000000 R15: ffff888100d9c200
[ 2169.736478]  ? ct_kernel_exit.constprop.0+0xa2/0xc0
[ 2169.736954]  ? do_idle+0x285/0x290
[ 2169.737323]  default_idle_call+0x63/0x90
[ 2169.737730]  do_idle+0x285/0x290
[ 2169.738089]  ? arch_cpu_idle_exit+0x30/0x30
[ 2169.738511]  ? mark_held_locks+0x1a/0x80
[ 2169.738917]  ? lockdep_hardirqs_on_prepare+0x12e/0x200
[ 2169.739417]  cpu_startup_entry+0x30/0x40
[ 2169.739825]  start_secondary+0x19a/0x1c0
[ 2169.740229]  ? set_cpu_sibling_map+0xbd0/0xbd0
[ 2169.740673]  secondary_startup_64_no_verify+0x15d/0x16b
[ 2169.741179]  </TASK>

[ 2169.741686] Allocated by task 1098:
[ 2169.742058]  kasan_save_stack+0x1c/0x40
[ 2169.742456]  kasan_save_track+0x10/0x30
[ 2169.742852]  __kasan_kmalloc+0x83/0x90
[ 2169.743246]  mlx5_dpll_probe+0xf5/0x3c0 [mlx5_dpll]
[ 2169.743730]  auxiliary_bus_probe+0x62/0xb0
[ 2169.744148]  really_probe+0x127/0x590
[ 2169.744534]  __driver_probe_device+0xd2/0x200
[ 2169.744973]  device_driver_attach+0x6b/0xf0
[ 2169.745402]  bind_store+0x90/0xe0
[ 2169.745761]  kernfs_fop_write_iter+0x1df/0x2a0
[ 2169.746210]  vfs_write+0x41f/0x790
[ 2169.746579]  ksys_write+0xc7/0x160
[ 2169.746947]  do_syscall_64+0x6f/0x140
[ 2169.747333]  entry_SYSCALL_64_after_hwframe+0x46/0x4e

[ 2169.748049] Freed by task 1220:
[ 2169.748393]  kasan_save_stack+0x1c/0x40
[ 2169.748789]  kasan_save_track+0x10/0x30
[ 2169.749188]  kasan_save_free_info+0x3b/0x50
[ 2169.749621]  poison_slab_object+0x106/0x180
[ 2169.750044]  __kasan_slab_free+0x14/0x50
[ 2169.750451]  kfree+0x118/0x330
[ 2169.750792]  mlx5_dpll_remove+0xf5/0x110 [mlx5_dpll]
[ 2169.751271]  auxiliary_bus_remove+0x2e/0x40
[ 2169.751694]  device_release_driver_internal+0x24b/0x2e0
[ 2169.752191]  unbind_store+0xa6/0xb0
[ 2169.752563]  kernfs_fop_write_iter+0x1df/0x2a0
[ 2169.753004]  vfs_write+0x41f/0x790
[ 2169.753381]  ksys_write+0xc7/0x160
[ 2169.753750]  do_syscall_64+0x6f/0x140
[ 2169.754132]  entry_SYSCALL_64_after_hwframe+0x46/0x4e

[ 2169.754847] Last potentially related work creation:
[ 2169.755315]  kasan_save_stack+0x1c/0x40
[ 2169.755709]  __kasan_record_aux_stack+0x9b/0xf0
[ 2169.756165]  __queue_work+0x382/0x8f0
[ 2169.756552]  call_timer_fn+0x126/0x320
[ 2169.756941]  __run_timers.part.0+0x2ea/0x4c0
[ 2169.757376]  run_timer_softirq+0x40/0x80
[ 2169.757782]  __do_softirq+0x1a1/0x509

[ 2169.758387] Second to last potentially related work creation:
[ 2169.758924]  kasan_save_stack+0x1c/0x40
[ 2169.759322]  __kasan_record_aux_stack+0x9b/0xf0
[ 2169.759773]  __queue_work+0x382/0x8f0
[ 2169.760156]  call_timer_fn+0x126/0x320
[ 2169.760550]  __run_timers.part.0+0x2ea/0x4c0
[ 2169.760978]  run_timer_softirq+0x40/0x80
[ 2169.761381]  __do_softirq+0x1a1/0x509

[ 2169.761998] The buggy address belongs to the object at ffff88812b326a00
                which belongs to the cache kmalloc-256 of size 256
[ 2169.763061] The buggy address is located 112 bytes inside of
                freed 256-byte region [ffff88812b326a00, ffff88812b326b00)

[ 2169.764346] The buggy address belongs to the physical page:
[ 2169.764866] page:000000000f2b1e89 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x12b324
[ 2169.765731] head:000000000f2b1e89 order:2 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 2169.766484] anon flags: 0x200000000000840(slab|head|node=0|zone=2)
[ 2169.767048] page_type: 0xffffffff()
[ 2169.767422] raw: 0200000000000840 ffff888100042b40 0000000000000000 dead000000000001
[ 2169.768183] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
[ 2169.768899] page dumped because: kasan: bad access detected

[ 2169.769649] Memory state around the buggy address:
[ 2169.770116]  ffff88812b326900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 2169.770805]  ffff88812b326980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 2169.771485] >ffff88812b326a00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2169.772173]                                                              ^
[ 2169.772787]  ffff88812b326a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2169.773477]  ffff88812b326b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 2169.774160] ==================================================================
[ 2169.774845] ==================================================================

I didn't manage to reproduce it. Though the issue seems to be obvious.
There is a chance that the mlx5_dpll_remove() calls
cancel_delayed_work() when the work runs and manages to re-arm itself.
In that case, after delay timer triggers next attempt to queue it,
it works with freed memory.

Fix this by using cancel_delayed_work_sync() instead which makes sure
that work is done when it returns.

Fixes: 496fd0a2 ("mlx5: Implement SyncE support using DPLL infrastructure")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240206164328.360313-1-jiri@resnulli.usSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Recently, I've been hitting following deadlock warning during dpll pin
dump:

[52804.637962] ======================================================
[52804.638536] WARNING: possible circular locking dependency detected
[52804.639111] 6.8.0-rc2jiri+ #1 Not tainted
[52804.639529] ------------------------------------------------------
[52804.640104] python3/2984 is trying to acquire lock:
[52804.640581] ffff88810e642678 (nlk_cb_mutex-GENERIC){+.+.}-{3:3}, at: netlink_dump+0xb3/0x780
[52804.641417]
               but task is already holding lock:
[52804.642010] ffffffff83bde4c8 (dpll_lock){+.+.}-{3:3}, at: dpll_lock_dumpit+0x13/0x20
[52804.642747]
               which lock already depends on the new lock.

[52804.643551]
               the existing dependency chain (in reverse order) is:
[52804.644259]
               -> #1 (dpll_lock){+.+.}-{3:3}:
[52804.644836]        lock_acquire+0x174/0x3e0
[52804.645271]        __mutex_lock+0x119/0x1150
[52804.645723]        dpll_lock_dumpit+0x13/0x20
[52804.646169]        genl_start+0x266/0x320
[52804.646578]        __netlink_dump_start+0x321/0x450
[52804.647056]        genl_family_rcv_msg_dumpit+0x155/0x1e0
[52804.647575]        genl_rcv_msg+0x1ed/0x3b0
[52804.648001]        netlink_rcv_skb+0xdc/0x210
[52804.648440]        genl_rcv+0x24/0x40
[52804.648831]        netlink_unicast+0x2f1/0x490
[52804.649290]        netlink_sendmsg+0x36d/0x660
[52804.649742]        __sock_sendmsg+0x73/0xc0
[52804.650165]        __sys_sendto+0x184/0x210
[52804.650597]        __x64_sys_sendto+0x72/0x80
[52804.651045]        do_syscall_64+0x6f/0x140
[52804.651474]        entry_SYSCALL_64_after_hwframe+0x46/0x4e
[52804.652001]
               -> #0 (nlk_cb_mutex-GENERIC){+.+.}-{3:3}:
[52804.652650]        check_prev_add+0x1ae/0x1280
[52804.653107]        __lock_acquire+0x1ed3/0x29a0
[52804.653559]        lock_acquire+0x174/0x3e0
[52804.653984]        __mutex_lock+0x119/0x1150
[52804.654423]        netlink_dump+0xb3/0x780
[52804.654845]        __netlink_dump_start+0x389/0x450
[52804.655321]        genl_family_rcv_msg_dumpit+0x155/0x1e0
[52804.655842]        genl_rcv_msg+0x1ed/0x3b0
[52804.656272]        netlink_rcv_skb+0xdc/0x210
[52804.656721]        genl_rcv+0x24/0x40
[52804.657119]        netlink_unicast+0x2f1/0x490
[52804.657570]        netlink_sendmsg+0x36d/0x660
[52804.658022]        __sock_sendmsg+0x73/0xc0
[52804.658450]        __sys_sendto+0x184/0x210
[52804.658877]        __x64_sys_sendto+0x72/0x80
[52804.659322]        do_syscall_64+0x6f/0x140
[52804.659752]        entry_SYSCALL_64_after_hwframe+0x46/0x4e
[52804.660281]
               other info that might help us debug this:

[52804.661077]  Possible unsafe locking scenario:

[52804.661671]        CPU0                    CPU1
[52804.662129]        ----                    ----
[52804.662577]   lock(dpll_lock);
[52804.662924]                                lock(nlk_cb_mutex-GENERIC);
[52804.663538]                                lock(dpll_lock);
[52804.664073]   lock(nlk_cb_mutex-GENERIC);
[52804.664490]

The issue as follows: __netlink_dump_start() calls control->start(cb)
with nlk->cb_mutex held. In control->start(cb) the dpll_lock is taken.
Then nlk->cb_mutex is released and taken again in netlink_dump(), while
dpll_lock still being held. That leads to ABBA deadlock when another
CPU races with the same operation.

Fix this by moving dpll_lock taking into dumpit() callback which ensures
correct lock taking order.

Fixes: 9d71b54b ("dpll: netlink: Add DPLL framework base functions")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://lore.kernel.org/r/20240207115902.371649-1-jiri@resnulli.usSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Paolo Abeni:
 "Including fixes from WiFi and netfilter.

  Current release - regressions:

   - nic: intel: fix old compiler regressions

   - netfilter: ipset: missing gc cancellations fixed

  Current release - new code bugs:

   - netfilter: ctnetlink: fix filtering for zone 0

  Previous releases - regressions:

   - core: fix from address in memcpy_to_iter_csum()

   - netfilter: nfnetlink_queue: un-break NF_REPEAT

   - af_unix: fix memory leak for dead unix_(sk)->oob_skb in GC.

   - devlink: avoid potential loop in devlink_rel_nested_in_notify_work()

   - iwlwifi:
       - mvm: fix a battery life regression
       - fix double-free bug

   - mac80211: fix waiting for beacons logic

   - nic: nfp: flower: prevent re-adding mac index for bonded port

  Previous releases - always broken:

   - rxrpc: fix generation of serial numbers to skip zero

   - tipc: check the bearer type before calling tipc_udp_nl_bearer_add()

   - tunnels: fix out of bounds access when building IPv6 PMTU error

   - nic: hv_netvsc: register VF in netvsc_probe if NET_DEVICE_REGISTER
     missed

   - nic: atlantic: fix DMA mapping for PTP hwts ring

  Misc:

   - selftests: more fixes to deal with very slow hosts"

* tag 'net-6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (80 commits)
  netfilter: nft_set_pipapo: remove scratch_aligned pointer
  netfilter: nft_set_pipapo: add helper to release pcpu scratch area
  netfilter: nft_set_pipapo: store index in scratch maps
  netfilter: nft_set_rbtree: skip end interval element from gc
  netfilter: nfnetlink_queue: un-break NF_REPEAT
  netfilter: nf_tables: use timestamp to check for set element timeout
  netfilter: nft_ct: reject direction for ct id
  netfilter: ctnetlink: fix filtering for zone 0
  s390/qeth: Fix potential loss of L3-IP@ in case of network issues
  netfilter: ipset: Missing gc cancellations fixed
  octeontx2-af: Initialize maps.
  net: ethernet: ti: cpsw: enable mac_managed_pm to fix mdio
  net: ethernet: ti: cpsw_new: enable mac_managed_pm to fix mdio
  netfilter: nft_set_pipapo: remove static in nft_pipapo_get()
  netfilter: nft_compat: restrict match/target protocol to u16
  netfilter: nft_compat: reject unused compat flag
  netfilter: nft_compat: narrow down revision to unsigned 8-bits
  net: intel: fix old compiler regressions
  MAINTAINERS: Maintainer change for rds
  selftests: cmsg_ipv6: repeat the exact packet
  ...

Pull pinctrl fix from Linus Walleij:
 "A single fix for the AMD driver which affects developer laptops, the
  pinctrl/GPIO driver won't probe on some systems"

* tag 'pinctrl-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: amd: Add IRQF_ONESHOT to the interrupt request

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Narrow down target/match revision to u8 in nft_compat.

2) Bail out with unused flags in nft_compat.

3) Restrict layer 4 protocol to u16 in nft_compat.

4) Remove static in pipapo get command that slipped through when
   reducing set memory footprint.

5) Follow up incremental fix for the ipset performance regression,
   this includes the missing gc cancellation, from Jozsef Kadlecsik.

6) Allow to filter by zone 0 in ctnetlink, do not interpret zone 0
   as no filtering, from Felix Huettner.

7) Reject direction for NFT_CT_ID.

8) Use timestamp to check for set element expiration while transaction
   is handled to prevent garbage collection from removing set elements
   that were just added by this transaction. Packet path and netlink
   dump/get path still use current time to check for expiration.

9) Restore NF_REPEAT in nfnetlink_queue, from Florian Westphal.

10) map_index needs to be percpu and per-set, not just percpu.
    At this time its possible for a pipapo set to fill the all-zero part
    with ones and take the 'might have bits set' as 'start-from-zero' area.
    From Florian Westphal. This includes three patches:

    - Change scratchpad area to a structure that provides space for a
      per-set-and-cpu toggle and uses it of the percpu one.

    - Add a new free helper to prepare for the next patch.

    - Remove the scratch_aligned pointer and makes AVX2 implementation
      use the exact same memory addresses for read/store of the matching
      state.

netfilter pull request 24-02-08

* tag 'nf-24-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nft_set_pipapo: remove scratch_aligned pointer
  netfilter: nft_set_pipapo: add helper to release pcpu scratch area
  netfilter: nft_set_pipapo: store index in scratch maps
  netfilter: nft_set_rbtree: skip end interval element from gc
  netfilter: nfnetlink_queue: un-break NF_REPEAT
  netfilter: nf_tables: use timestamp to check for set element timeout
  netfilter: nft_ct: reject direction for ct id
  netfilter: ctnetlink: fix filtering for zone 0
  netfilter: ipset: Missing gc cancellations fixed
  netfilter: nft_set_pipapo: remove static in nft_pipapo_get()
  netfilter: nft_compat: restrict match/target protocol to u16
  netfilter: nft_compat: reject unused compat flag
  netfilter: nft_compat: narrow down revision to unsigned 8-bits
====================

Link: https://lore.kernel.org/r/20240208112834.1433-1-pablo@netfilter.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

use ->scratch for both avx2 and the generic implementation.

After previous change the scratch->map member is always aligned properly
for AVX2, so we can just use scratch->map in AVX2 too.

The alignoff delta is stored in the scratchpad so we can reconstruct
the correct address to free the area again.

Fixes: 7400b063 ("nft_set_pipapo: Introduce AVX2-based lookup implementation")
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

After next patch simple kfree() is not enough anymore, so add
a helper for it.
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Pipapo needs a scratchpad area to keep state during matching.
This state can be large and thus cannot reside on stack.

Each set preallocates percpu areas for this.

On each match stage, one scratchpad half starts with all-zero and the other
is inited to all-ones.

At the end of each stage, the half that starts with all-ones is
always zero.  Before next field is tested, pointers to the two halves
are swapped, i.e.  resmap pointer turns into fill pointer and vice versa.

After the last field has been processed, pipapo stashes the
index toggle in a percpu variable, with assumption that next packet
will start with the all-zero half and sets all bits in the other to 1.

This isn't reliable.

There can be multiple sets and we can't be sure that the upper
and lower half of all set scratch map is always in sync (lookups
can be conditional), so one set might have swapped, but other might
not have been queried.

Thus we need to keep the index per-set-and-cpu, just like the
scratchpad.

Note that this bug fix is incomplete, there is a related issue.

avx2 and normal implementation might use slightly different areas of the
map array space due to the avx2 alignment requirements, so
m->scratch (generic/fallback implementation) and ->scratch_aligned
(avx) may partially overlap. scratch and scratch_aligned are not distinct
objects, the latter is just the aligned address of the former.

After this change, write to scratch_align->map_index may write to
scratch->map, so this issue becomes more prominent, we can set to 1
a bit in the supposedly-all-zero area of scratch->map[].

A followup patch will remove the scratch_aligned and makes generic and
avx code use the same (aligned) area.

Its done in a separate change to ease review.

Fixes: 3c4287f6 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

rbtree lazy gc on insert might collect an end interval element that has
been just added in this transactions, skip end interval elements that
are not yet active.

Fixes: f718863a ("netfilter: nft_set_rbtree: fix overlap expiration walk")
Cc: stable@vger.kernel.org
Reported-by: lonial con <kongln9170@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Only override userspace verdict if the ct hook returns something
other than ACCEPT.

Else, this replaces NF_REPEAT (run all hooks again) with NF_ACCEPT
(move to next hook).

Fixes: 6291b3a6 ("netfilter: conntrack: convert nf_conntrack_update to netfilter verdicts")
Reported-by: l.6diay@passmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Add a timestamp field at the beginning of the transaction, store it
in the nftables per-netns area.

Update set backend .insert, .deactivate and sync gc path to use the
timestamp, this avoids that an element expires while control plane
transaction is still unfinished.

.lookup and .update, which are used from packet path, still use the
current time to check if the element has expired. And .get path and dump
also since this runs lockless under rcu read size lock. Then, there is
async gc which also needs to check the current time since it runs
asynchronously from a workqueue.

Fixes: c3e1b005 ("netfilter: nf_tables: add set element timeout support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Direction attribute is ignored, reject it in case this ever needs to be
supported

Fixes: 3087c3f7 ("netfilter: nft_ct: Add ct id support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

previously filtering for the default zone would actually skip the zone
filter and flush all zones.

Fixes: eff3c558 ("netfilter: ctnetlink: support filtering by zone")
Reported-by: Ilya Maximets <i.maximets@ovn.org>
Closes: https://lore.kernel.org/netdev/2032238f-31ac-4106-8f22-522e76df5a12@ovn.org/Signed-off-by: Felix Huettner <felix.huettner@mail.schwarz>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Symptom:
In case of a bad cable connection (e.g. dirty optics) a fast sequence of
network DOWN-UP-DOWN-UP could happen. UP triggers recovery of the qeth
interface. In case of a second DOWN while recovery is still ongoing, it
can happen that the IP@ of a Layer3 qeth interface is lost and will not
be recovered by the second UP.

Problem:
When registration of IP addresses with Layer 3 qeth devices fails, (e.g.
because of bad address format) the respective IP address is deleted from
its hash-table in the driver. If registration fails because of a ENETDOWN
condition, the address should stay in the hashtable, so a subsequent
recovery can restore it.

3caa4af8 ("qeth: keep ip-address after LAN_OFFLINE failure")
fixes this for registration failures during normal operation, but not
during recovery.

Solution:
Keep L3-IP address in case of ENETDOWN in qeth_l3_recover_ip(). For
consistency with qeth_l3_add_ip() we also keep it in case of EADDRINUSE,
i.e. for some reason the card already/still has this address registered.

Fixes: 4a71df50 ("qeth: new qeth device driver")
Cc: stable@vger.kernel.org
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://lore.kernel.org/r/20240206085849.2902775-1-wintera@linux.ibm.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The patch fdb8e12cc2cc ("netfilter: ipset: fix performance regression
in swap operation") missed to add the calls to gc cancellations
at the error path of create operations and at module unload. Also,
because the half of the destroy operations now executed by a
function registered by call_rcu(), neither NFNL_SUBSYS_IPSET mutex
or rcu read lock is held and therefore the checking of them results
false warnings.

Fixes: 97f7cf1c ("netfilter: ipset: fix performance regression in swap operation")
Reported-by: syzbot+52bbc0ad036f6f0d4a25@syzkaller.appspotmail.com
Reported-by: Brad Spengler <spender@grsecurity.net>
Reported-by: Стас Ничипорович <stasn77@gmail.com>
Tested-by: Brad Spengler <spender@grsecurity.net>
Tested-by: Стас Ничипорович <stasn77@gmail.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

kmalloc_array() without __GFP_ZERO flag does not initialize
memory to zero. This causes issues. Use kcalloc() for maps and
bitmap_zalloc() for bitmaps.

Fixes: dd784287 ("octeontx2-af: Add new devlink param to configure maximum usable NIX block LFs")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Brett Creeley <bcreeley@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240206024000.1070260-1-rkannoth@marvell.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Sinthu Raja says:

====================
CPSW: enable mac_managed_pm to fix mdio

This patch fix the resume/suspend issue on CPSW interface.

Reference from the foloowing patchwork:
https://lore.kernel.org/netdev/20221014144729.1159257-2-shenwei.wang@nxp.com/T/

V1: https://patchwork.kernel.org/project/netdevbpf/patch/20240122083414.6246-1-sinthu.raja@ti.com/
V2: https://patchwork.kernel.org/project/netdevbpf/patch/20240122093326.7618-1-sinthu.raja@ti.com/
====================

Link: https://lore.kernel.org/r/20240206005928.15703-1-sinthu.raja@ti.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The below commit  introduced a WARN when phy state is not in the states:
PHY_HALTED, PHY_READY and PHY_UP.
commit 744d23c7 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")

When cpsw resumes, there have port in PHY_NOLINK state, so the below
warning comes out. Set mac_managed_pm be true to tell mdio that the phy
resume/suspend is managed by the mac, to fix the following warning:

WARNING: CPU: 0 PID: 965 at drivers/net/phy/phy_device.c:326 mdio_bus_phy_resume+0x140/0x144
CPU: 0 PID: 965 Comm: sh Tainted: G           O       6.1.46-g247b2535b2 #1
Hardware name: Generic AM33XX (Flattened Device Tree)
 unwind_backtrace from show_stack+0x18/0x1c
 show_stack from dump_stack_lvl+0x24/0x2c
 dump_stack_lvl from __warn+0x84/0x15c
 __warn from warn_slowpath_fmt+0x1a8/0x1c8
 warn_slowpath_fmt from mdio_bus_phy_resume+0x140/0x144
 mdio_bus_phy_resume from dpm_run_callback+0x3c/0x140
 dpm_run_callback from device_resume+0xb8/0x2b8
 device_resume from dpm_resume+0x144/0x314
 dpm_resume from dpm_resume_end+0x14/0x20
 dpm_resume_end from suspend_devices_and_enter+0xd0/0x924
 suspend_devices_and_enter from pm_suspend+0x2e0/0x33c
 pm_suspend from state_store+0x74/0xd0
 state_store from kernfs_fop_write_iter+0x104/0x1ec
 kernfs_fop_write_iter from vfs_write+0x1b8/0x358
 vfs_write from ksys_write+0x78/0xf8
 ksys_write from ret_fast_syscall+0x0/0x54
Exception stack(0xe094dfa8 to 0xe094dff0)
dfa0:                   00000004 005c3fb8 00000001 005c3fb8 00000004 00000001
dfc0: 00000004 005c3fb8 b6f6bba0 00000004 00000004 0059edb8 00000000 00000000
dfe0: 00000004 bed918f0 b6f09bd3 b6e89a66

Cc: <stable@vger.kernel.org> # v6.0+
Fixes: 744d23c7 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Fixes: fba863b8 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM")
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The below commit  introduced a WARN when phy state is not in the states:
PHY_HALTED, PHY_READY and PHY_UP.
commit 744d23c7 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")

When cpsw_new resumes, there have port in PHY_NOLINK state, so the below
warning comes out. Set mac_managed_pm be true to tell mdio that the phy
resume/suspend is managed by the mac, to fix the following warning:

WARNING: CPU: 0 PID: 965 at drivers/net/phy/phy_device.c:326 mdio_bus_phy_resume+0x140/0x144
CPU: 0 PID: 965 Comm: sh Tainted: G           O       6.1.46-g247b2535b2 #1
Hardware name: Generic AM33XX (Flattened Device Tree)
 unwind_backtrace from show_stack+0x18/0x1c
 show_stack from dump_stack_lvl+0x24/0x2c
 dump_stack_lvl from __warn+0x84/0x15c
 __warn from warn_slowpath_fmt+0x1a8/0x1c8
 warn_slowpath_fmt from mdio_bus_phy_resume+0x140/0x144
 mdio_bus_phy_resume from dpm_run_callback+0x3c/0x140
 dpm_run_callback from device_resume+0xb8/0x2b8
 device_resume from dpm_resume+0x144/0x314
 dpm_resume from dpm_resume_end+0x14/0x20
 dpm_resume_end from suspend_devices_and_enter+0xd0/0x924
 suspend_devices_and_enter from pm_suspend+0x2e0/0x33c
 pm_suspend from state_store+0x74/0xd0
 state_store from kernfs_fop_write_iter+0x104/0x1ec
 kernfs_fop_write_iter from vfs_write+0x1b8/0x358
 vfs_write from ksys_write+0x78/0xf8
 ksys_write from ret_fast_syscall+0x0/0x54
Exception stack(0xe094dfa8 to 0xe094dff0)
dfa0:                   00000004 005c3fb8 00000001 005c3fb8 00000004 00000001
dfc0: 00000004 005c3fb8 b6f6bba0 00000004 00000004 0059edb8 00000000 00000000
dfe0: 00000004 bed918f0 b6f09bd3 b6e89a66

Cc: <stable@vger.kernel.org> # v6.0+
Fixes: 744d23c7 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Fixes: fba863b8 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM")
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

This has slipped through when reducing memory footprint for set
elements, remove it.

Fixes: 9dad402b ("netfilter: nf_tables: expose opaque set element as struct nft_elem_priv")
Reported-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Pull crypto fixes from Herbert Xu:
 "Fix regressions in cbc and algif_hash, as well as an older
  NULL-pointer dereference in ccp"

* tag 'v6.8-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: algif_hash - Remove bogus SGL free on zero-length error path
  crypto: cbc - Ensure statesize is zero
  crypto: ccp - Fix null pointer dereference in __sev_platform_shutdown_locked

Pull percpu fix from Dennis Zhou:

 - fix riscv wrong size passed to local_flush_tlb_range_asid()

* tag 'percpu-for-6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
  riscv: Fix wrong size passed to local_flush_tlb_range_asid()

xt_check_{match,target} expects u16, but NFTA_RULE_COMPAT_PROTO is u32.

NLA_POLICY_MAX(NLA_BE32, 65535) cannot be used because .max in
nla_policy is s16, see 3e48be05 ("netlink: add attribute range
validation to policy").

Fixes: 0ca743a5 ("netfilter: nf_tables: add compatibility layer for x_tables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>