- 07 Mar, 2019 1 commit
-
-
Maxime Ripard authored
The preferred bpp for the fbdev emulation buffer has been 32 so far, which means that by default we will allocate an 8MB buffer with a 1920x1080 resolution. Worse this memory will be allocated from the CMA pool, and will never be freed even if we don't use the fbdev emulation. Therefore, reducing it is a big deal, and switching to 16bpp by default will gain us around 4MB at 1920x1080, while keeping decent color depth. And users still have the option to switch to 32bpp using the kernel command line. Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by:
Eric Anholt <eric@anholt.net> Reviewed-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190306140245.21973-1-maxime.ripard@bootlin.com
-
- 06 Mar, 2019 4 commits
-
-
Sean Paul authored
Picking up v5.0 + missed misc-fixes from last release Signed-off-by:Sean Paul <seanpaul@chromium.org>
-
Paul Kocialkowski authored
In order to test whether the load tracker is working as expected, we need the ability to compare the commit result with the underrun indication. With the load tracker always enabled, commits that are expected to trigger an underrun are always rejected, so userspace cannot get the actual underrun indication from the hardware. Add a debugfs entry to disable/enable the load tracker, so that a DRM commit expected to trigger an underrun can go through with the load tracker disabled. The underrun indication is then available to userspace and can be checked against the commit result with the load tracker enabled. Signed-off-by:
-
Boris Brezillon authored
The HVS block is supposed to fill the pixelvalve FIFOs fast enough to meet the requested framerate. The problem is, the HVS and memory bus bandwidths are limited, and if we don't take these limitations into account we might end up with HVS underflow errors. This patch is trying to model the per-plane HVS and memory bus bandwidth consumption and take a decision at atomic_check() time whether the estimated load will fit in the HVS and membus budget. Note that we take an extra margin on the memory bus consumption to let the system run smoothly when other blocks are doing heavy use of the memory bus. Same goes for the HVS limit, except the margin is smaller in this case, since the HVS is not used by external components. Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by:
-
Boris Brezillon authored
Add a debugfs entry and helper for reporting HVS underrun errors as well as helpers for masking and unmasking the underrun interrupts. Add an IRQ handler and initial IRQ configuration. Rework related register definitions to take the channel number. Signed-off-by:
-
- 05 Mar, 2019 3 commits
-
-
David Francis authored
The DP 1.4 spec defines the SDP header and SDP contents for a Picture Parameter Set (PPS) that must be sent in advance of DSC transmission to define the encoding characteristics. This was done in one struct, drm_dsc_pps_infoframe, which conatined the SDP header and PPS. Because the PPS is a property of DSC over any connector, not just DP, and because drm drivers may have their own SDP structs they wish to use, make the functions that initialise SDP and PPS headers take the components they operate on, not drm_dsc_pps_infoframe, Signed-off-by:
David Francis <David.Francis@amd.com> Reviewed-by:
Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
Harry Wentland <harry.wentland@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190221202001.28430-4-David.Francis@amd.com
-
David Francis authored
Native 420 and 422 transfer modes are new in DSC1.2 In these modes, each two pixels of a slice are treated as one pixel, so the slice width is half as large (round down) for the purposes of calucating the groups per line and chunk size in bytes In native 422 mode, each pixel has four components, so the mux component of a group is larger by one additional mux word and one additional component Now that there is native 422 support, the configuration option previously called enable422 is renamed to simple_422 to avoid confusion Acked-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
-
David Francis authored
The function intel_compute_rc_parameters is part of the dsc spec and is not driver-specific. Other drm drivers might like to use it. The function is not changed; just moved and renamed. Reviewed-by:
-
- 04 Mar, 2019 11 commits
-
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-fixes for v5.0: - Block fb changes for async atomic updates to prevent a use after free. - Fix ID mismatch error on load in bochs. - Fix memory leak when drm_setup fails. - Fixes around handling of DRM_AUTH. Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/42113611-e2cd-6bdd-7de5-4f8ab5a0cbe6@linux.intel.com
-
Mario Kleiner authored
In VRR mode, keep track of the vblank count of the last completed pageflip in amdgpu_crtc->last_flip_vblank, as recorded in the pageflip completion handler after each completed flip. Use that count to prevent mmio programming a new pageflip within the same vblank in which the last pageflip completed, iow. to throttle pageflips to at most one flip per video frame, while at the same time allowing to request a flip not only before start of vblank, but also anywhere within vblank. The old logic did the same, and made sense for regular fixed refresh rate flipping, but in vrr mode it prevents requesting a flip anywhere inside the possibly huge vblank, thereby reducing framerate in vrr mode instead of improving it, by delaying a slightly delayed flip requests up to a maximum vblank duration + 1 scanout duration. This would limit VRR usefulness to only help applications with a very high GPU demand, which can submit the flip request before start of vblank, but then have to wait long for fences to complete. With this method a flip can be both requested and - after fences have completed - executed, ie. it doesn't matter if the request (amdgpu_dm_do_flip()) gets delayed until deep into the extended vblank due to cpu execution delays. This also allows clients which want to regulate framerate within the vrr range a much more fine-grained control of flip timing, a feature that might be useful for video playback, and is very useful for neuroscience/vision research applications. In regular non-VRR mode, retain the old flip submission behavior. This to keep flip scheduling for fullscreen X11/GLX OpenGL clients intact, if they use the GLX_OML_sync_control extensions glXSwapBufferMscOML(, ..., target_msc,...) function with a specific target_msc target vblank count. glXSwapBuffersMscOML() or DRI3/Present PresentPixmap() will not flip at the proper target_msc for a non-zero target_msc if VRR mode is active with this patch. They'd often flip one frame too early. However, this limitation should not matter much in VRR mode, as scheduling based on vblank counts is pretty futile/unusable under variable refresh duration anyway, so no real extra harm is done. According to some testing already done with this patch by Nicholas on top of my tests, IGT tests didn't report any problems. If fixes stuttering and flickering when flipping at rates below the minimum vrr refresh rate. Fixes: bb47de73 ("drm/amdgpu: Set FreeSync state using drm VRR properties") Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Cc: <stable@vger.kernel.org> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Michel Dänzer <michel@daenzer.net> Tested-by:
Bruno Filipe <bmilreu@gmail.com> Reviewed-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a DRM_NOTE message. Fix this. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Noralf Trønnes authored
This protects device resources from use after device removal. There are 3 ways for driver-device unbinding to happen: - The driver module is unloaded causing the driver to be unregistered. This can't happen as long as there are open file handles because a reference is taken on the module. - The device is removed (Device Tree overlay unloading). This can happen at any time. - The driver sysfs unbind file can be used to unbind the driver from the device. This can happen any time. v2: Since drm_atomic_helper_shutdown() has to be called after drm_dev_unplug() we don't want do block ->disable after unplug. Signed-off-by:Noralf Trønnes <noralf@tronnes.org> Acked-by:
Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190225144232.20761-8-noralf@tronnes.org
-
Noralf Trønnes authored
No more users left so it can go alongside its helpers. Update the tinydrm docs description and remove todo entry. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190225144232.20761-7-noralf@tronnes.org
-
Noralf Trønnes authored
Use devm_drm_dev_init() and drop using tinydrm_device. v2: devm_drm_dev_register() was dropped so add driver release callbacks. Signed-off-by:
-
Noralf Trønnes authored
Use devm_drm_dev_init() and drop using tinydrm_device. v2: devm_drm_dev_register() was dropped so add a driver release callback. Signed-off-by:
-
Noralf Trønnes authored
Add driver example that shows how devm_drm_dev_init() can be used. v2: Expand docs (Sam, Daniel) Signed-off-by:
-
Noralf Trønnes authored
This adds a resource managed (devres) version of drm_dev_init(). v2: Remove devm_drm_dev_register() since we can't touch hw in devm release functions and drivers want to disable hw on driver module unload (Daniel Vetter, Greg KH) Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Greg KH <gregkh@linuxfoundation.org> Signed-off-by: -
Noralf Trønnes authored
This makes it safe to access drm_device->dev after the parent device has been removed/unplugged. Signed-off-by:
-
Dave Airlie authored
There is a really hairy resolution involving amdgpu fixes, that I'd rather confirm here. Also some misc fixes are landed by me, but the pr has them as well. Signed-off-by:
-
- 03 Mar, 2019 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Arnd Bergmann: "One more set of simple ARM platform fixes: - A boot regression on qualcomm msm8998 - Gemini display controllers got turned off by accident - incorrect reference counting in optee" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: tee: optee: add missing of_node_put after of_device_is_available arm64: dts: qcom: msm8998: Extend TZ reserved memory area ARM: dts: gemini: Re-enable display controller
-
- 02 Mar, 2019 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "Two last minute fixes: - Prevent value evaluation via functions happening in the user access enabled region of __put_user() (put another way: make sure to evaluate the value to be stored in user space _before_ enabling user space accesses) - Correct the definition of a Hyper-V hypercall constant" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/hyper-v: Fix definition of HV_MAX_FLUSH_REP_COUNT x86/uaccess: Don't leak the AC flag into __put_user() value evaluation -
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Nine small fixes. The resume fix is a cosmetic removal of a warning with an incorrect condition causing it to alarm people wrongly. The other eight patches correct a thinko in Christoph Hellwig's DMA conversion series. Without it all these drivers end up with 32 bit DMA masks meaning they bounce any page over 4GB before sending it to the controller. Nowadays, even laptops mostly have memory above 4GB, so this can lead to significant performance degradation with all the bouncing" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: core: Avoid that system resume triggers a kernel warning scsi: hptiop: fix calls to dma_set_mask() scsi: hisi_sas: fix calls to dma_set_mask_and_coherent() scsi: csiostor: fix calls to dma_set_mask_and_coherent() scsi: bfa: fix calls to dma_set_mask_and_coherent() scsi: aic94xx: fix calls to dma_set_mask_and_coherent() scsi: 3w-sas: fix calls to dma_set_mask_and_coherent() scsi: 3w-9xxx: fix calls to dma_set_mask_and_coherent() scsi: lpfc: fix calls to dma_set_mask_and_coherent()
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix refcount leak in act_ipt during replace, from Davide Caratti. 2) Set task state properly in tun during blocking reads, from Timur Celik. 3) Leaked reference in DSA, from Wen Yang. 4) NULL deref in act_tunnel_key, from Vlad Buslov. 5) cipso_v4_erro can reference the skb IPCB in inappropriate contexts thus referencing garbage, from Nazarov Sergey. 6) Don't accept RTA_VIA and RTA_GATEWAY in contexts where those attributes make no sense. 7) Fix hung sendto in tipc, from Tung Nguyen. 8) Out-of-bounds access in netlabel, from Paul Moore. 9) Grant reference leak in xen-netback, from Igor Druzhinin. 10) Fix tx stalls with lan743x, from Bryan Whitehead. 11) Fix interrupt storm with mv88e6xxx, from Hein Kallweit. 12) Memory leak in sit on device registry failure, from Mao Wenan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits) net: sit: fix memory leak in sit_init_net() net: dsa: mv88e6xxx: Fix statistics on mv88e6161 geneve: correctly handle ipv6.disable module parameter net: dsa: mv88e6xxx: prevent interrupt storm caused by mv88e6390x_port_set_cmode bpf: fix sanitation rewrite in case of non-pointers ipv4: Add ICMPv6 support when parse route ipproto MIPS: eBPF: Fix icache flush end address lan743x: Fix TX Stall Issue net: phy: phylink: fix uninitialized variable in phylink_get_mac_state net: aquantia: regression on cpus with high cores: set mode with 8 queues selftests: fixes for UDP GRO bpf: drop refcount if bpf_map_new_fd() fails in map_create() net: dsa: mv88e6xxx: power serdes on/off for 10G interfaces on 6390X net: dsa: mv88e6xxx: Fix u64 statistics xen-netback: don't populate the hash cache on XenBus disconnect xen-netback: fix occasional leak of grant ref mappings under memory pressure sctp: chunk.c: correct format string for size_t in printk net: netem: fix skb length BUG_ON in __skb_to_sgvec netlabel: fix out-of-bounds memory accesses ipv4: Pass original device to ip_rcv_finish_core ... -
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull more crypto fixes from Herbert Xu: "This fixes a couple of issues in arm64/chacha that was introduced in 5.0" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: arm64/chacha - fix hchacha_block_neon() for big endian crypto: arm64/chacha - fix chacha_4block_xor_neon() for big endian
-
Mao Wenan authored
If register_netdev() is failed to register sitn->fb_tunnel_dev, it will go to err_reg_dev and forget to free netdev(sitn->fb_tunnel_dev). BUG: memory leak unreferenced object 0xffff888378daad00 (size 512): comm "syz-executor.1", pid 4006, jiffies 4295121142 (age 16.115s) hex dump (first 32 bytes): 00 e6 ed c0 83 88 ff ff 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000d6dcb63e>] kvmalloc include/linux/mm.h:577 [inline] [<00000000d6dcb63e>] kvzalloc include/linux/mm.h:585 [inline] [<00000000d6dcb63e>] netif_alloc_netdev_queues net/core/dev.c:8380 [inline] [<00000000d6dcb63e>] alloc_netdev_mqs+0x600/0xcc0 net/core/dev.c:8970 [<00000000867e172f>] sit_init_net+0x295/0xa40 net/ipv6/sit.c:1848 [<00000000871019fa>] ops_init+0xad/0x3e0 net/core/net_namespace.c:129 [<00000000319507f6>] setup_net+0x2ba/0x690 net/core/net_namespace.c:314 [<0000000087db4f96>] copy_net_ns+0x1dc/0x330 net/core/net_namespace.c:437 [<0000000057efc651>] create_new_namespaces+0x382/0x730 kernel/nsproxy.c:107 [<00000000676f83de>] copy_namespaces+0x2ed/0x3d0 kernel/nsproxy.c:165 [<0000000030b74bac>] copy_process.part.27+0x231e/0x6db0 kernel/fork.c:1919 [<00000000fff78746>] copy_process kernel/fork.c:1713 [inline] [<00000000fff78746>] _do_fork+0x1bc/0xe90 kernel/fork.c:2224 [<000000001c2e0d1c>] do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:290 [<00000000ec48bd44>] entry_SYSCALL_64_after_hwframe+0x49/0xbe [<0000000039acff8a>] 0xffffffffffffffff Signed-off-by:Mao Wenan <maowenan@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
Despite what the datesheet says, the silicon implements the older way of snapshoting the statistics. Change the op. Reported-by: Chris.Healy@zii.aero Tested-by: Chris.Healy@zii.aero Fixes: 0ac64c39 ("net: dsa: mv88e6xxx: mv88e6161 uses mv88e6320 stats snapshot") Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Jiri Benc authored
When IPv6 is compiled but disabled at runtime, geneve_sock_add returns -EAFNOSUPPORT. For metadata based tunnels, this causes failure of the whole operation of bringing up the tunnel. Ignore failure of IPv6 socket creation for metadata based tunnels caused by IPv6 not being available. This is the same fix as what commit d074bf96 ("vxlan: correctly handle ipv6.disable module parameter") is doing for vxlan. Note there's also commit c0a47e44 ("geneve: should not call rt6_lookup() when ipv6 was disabled") which fixes a similar issue but for regular tunnels, while this patch is needed for metadata based tunnels. Signed-off-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf 2019-03-01 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) fix sanitation rewrite, from Daniel. 2) fix error path on map_new_fd, from Peng. 3) fix icache flush address, from Paul. ==================== Signed-off-by: -
Heiner Kallweit authored
When debugging another issue I faced an interrupt storm in this driver (88E6390, port 9 in SGMII mode), consisting of alternating link-up / link-down interrupts. Analysis showed that the driver wanted to set a cmode that was set already. But so far mv88e6390x_port_set_cmode() doesn't check this and powers down SERDES, what causes the link to break, and eventually results in the described interrupt storm. Fix this by checking whether the cmode actually changes. We want that the very first call to mv88e6390x_port_set_cmode() always configures the registers, therefore initialize port.cmode with a value that is different from any supported cmode value. We have to take care that we only init the ports cmode once chip->info->num_ports is set. v2: - add small helper and init the number of actual ports only Fixes: 364e9d77 ("net: dsa: mv88e6xxx: Power on/off SERDES on cmode change") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Daniel Borkmann authored
Marek reported that he saw an issue with the below snippet in that timing measurements where off when loaded as unpriv while results were reasonable when loaded as privileged: [...] uint64_t a = bpf_ktime_get_ns(); uint64_t b = bpf_ktime_get_ns(); uint64_t delta = b - a; if ((int64_t)delta > 0) { [...] Turns out there is a bug where a corner case is missing in the fix d3bd7413 ("bpf: fix sanitation of alu op with pointer / scalar type from different paths"), namely fixup_bpf_calls() only checks whether aux has a non-zero alu_state, but it also needs to test for the case of BPF_ALU_NON_POINTER since in both occasions we need to skip the masking rewrite (as there is nothing to mask). Fixes: d3bd7413 ("bpf: fix sanitation of alu op with pointer / scalar type from different paths") Reported-by:Marek Majkowski <marek@cloudflare.com> Reported-by:
Arthur Fabre <afabre@cloudflare.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/netdev/CAJPywTJqP34cK20iLM5YmUMz9KXQOdu1-+BZrGMAGgLuBWz7fg@mail.gmail.com/T/Acked-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Hangbin Liu authored
For ip rules, we need to use 'ipproto ipv6-icmp' to match ICMPv6 headers. But for ip -6 route, currently we only support tcp, udp and icmp. Add ICMPv6 support so we can match ipv6-icmp rules for route lookup. v2: As David Ahern and Sabrina Dubroca suggested, Add an argument to rtm_getroute_parse_ip_proto() to handle ICMP/ICMPv6 with different family. Reported-by:
Jianlin Shi <jishi@redhat.com> Fixes: eacb9384 ("ipv6: support sport, dport and ip_proto in RTM_GETROUTE") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
- 01 Mar, 2019 8 commits
-
-
Paul Burton authored
The MIPS eBPF JIT calls flush_icache_range() in order to ensure the icache observes the code that we just wrote. Unfortunately it gets the end address calculation wrong due to some bad pointer arithmetic. The struct jit_ctx target field is of type pointer to u32, and as such adding one to it will increment the address being pointed to by 4 bytes. Therefore in order to find the address of the end of the code we simply need to add the number of 4 byte instructions emitted, but we mistakenly add the number of instructions multiplied by 4. This results in the call to flush_icache_range() operating on a memory region 4x larger than intended, which is always wasteful and can cause crashes if we overrun into an unmapped page. Fix this by correcting the pointer arithmetic to remove the bogus multiplication, and use braces to remove the need for a set of brackets whilst also making it obvious that the target field is a pointer. Signed-off-by:
Paul Burton <paul.burton@mips.com> Fixes: b6bd53f9 ("MIPS: Add missing file for eBPF JIT.") Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Cc: netdev@vger.kernel.org Cc: bpf@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: stable@vger.kernel.org # v4.13+ Signed-off-by:
-
Bryan Whitehead authored
It has been observed that tx queue stalls while downloading from certain web sites (example www.speedtest.net) The cause has been tracked down to a corner case where dma descriptors where not setup properly. And there for a tx completion interrupt was not signaled. This fix corrects the problem by properly marking the end of a multi descriptor transmission. Fixes: 23f0703c ("lan743x: Add main source files for new lan743x driver") Signed-off-by:
Bryan Whitehead <Bryan.Whitehead@microchip.com> Signed-off-by:
-
Heiner Kallweit authored
When debugging an issue I found implausible values in state->pause. Reason in that state->pause isn't initialized and later only single bits are changed. Also the struct itself isn't initialized in phylink_resolve(). So better initialize state->pause and other not yet initialized fields. v2: - use right function name in subject v3: - initialize additional fields Fixes: 9525ae83 ("phylink: add phylink infrastructure") Signed-off-by:
-
Dmitry Bogdanov authored
Recently the maximum number of queues was increased up to 8, but NIC was not fully configured for 8 queues. In setups with more than 4 CPU cores parts of TX traffic gets lost if the kernel routes it to queues 4th-8th. This patch sets a tx hw traffic mode with 8 queues. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202651 Fixes: 71a963cf ("net: aquantia: increase max number of hw queues") Reported-by:
Nicholas Johnson <nicholas.johnson@outlook.com.au> Signed-off-by:
Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by:
Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by:
-
Paolo Abeni authored
The current implementation for UDP GRO tests is racy: the receiver may flush the RX queue while the sending is still transmitting and incorrectly report RX errors, with a wrong number of packet received. Add explicit timeouts to the receiver for both connection activation (first packet received for UDP) and reception completion, so that in the above critical scenario the receiver will wait for the transfer completion. Fixes: 3327a9c4 ("selftests: add functionals test for UDP GRO") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull IOMMU fix from Joerg Roedel: "One important fix for a memory corruption issue in the Intel VT-d driver that triggers on hardware with deep PCI hierarchies" * tag 'iommu-fix-v5.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/dmar: Fix buffer overflow during PCI bus notification
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "2 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: hugetlbfs: fix races and page leaks during migration kasan: turn off asan-stack for clang-8 and earlier
-
Mike Kravetz authored
hugetlb pages should only be migrated if they are 'active'. The routines set/clear_page_huge_active() modify the active state of hugetlb pages. When a new hugetlb page is allocated at fault time, set_page_huge_active is called before the page is locked. Therefore, another thread could race and migrate the page while it is being added to page table by the fault code. This race is somewhat hard to trigger, but can be seen by strategically adding udelay to simulate worst case scheduling behavior. Depending on 'how' the code races, various BUG()s could be triggered. To address this issue, simply delay the set_page_huge_active call until after the page is successfully added to the page table. Hugetlb pages can also be leaked at migration time if the pages are associated with a file in an explicitly mounted hugetlbfs filesystem. For example, consider a two node system with 4GB worth of huge pages available. A program mmaps a 2G file in a hugetlbfs filesystem. It then migrates the pages associated with the file from one node to another. When the program exits, huge page counts are as follows: node0 1024 free_hugepages 1024 nr_hugepages node1 0 free_hugepages 1024 nr_hugepages Filesystem Size Used Avail Use% Mounted on nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool That is as expected. 2G of huge pages are taken from the free_hugepages counts, and 2G is the size of the file in the explicitly mounted filesystem. If the file is then removed, the counts become: node0 1024 free_hugepages 1024 nr_hugepages node1 1024 free_hugepages 1024 nr_hugepages Filesystem Size Used Avail Use% Mounted on nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool Note that the filesystem still shows 2G of pages used, while there actually are no huge pages in use. The only way to 'fix' the filesystem accounting is to unmount the filesystem If a hugetlb page is associated with an explicitly mounted filesystem, this information in contained in the page_private field. At migration time, this information is not preserved. To fix, simply transfer page_private from old to new page at migration time if necessary. There is a related race with removing a huge page from a file and migration. When a huge page is removed from the pagecache, the page_mapping() field is cleared, yet page_private remains set until the page is actually freed by free_huge_page(). A page could be migrated while in this state. However, since page_mapping() is not set the hugetlbfs specific routine to transfer page_private is not called and we leak the page count in the filesystem. To fix that, check for this condition before migrating a huge page. If the condition is detected, return EBUSY for the page. Link: http://lkml.kernel.org/r/74510272-7319-7372-9ea6-ec914734c179@oracle.com Link: http://lkml.kernel.org/r/20190212221400.3512-1-mike.kravetz@oracle.com Fixes: bcc54222 ("mm: hugetlb: introduce page_huge_active") Signed-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: <stable@vger.kernel.org> [mike.kravetz@oracle.com: v2] Link: http://lkml.kernel.org/r/7534d322-d782-8ac6-1c8d-a8dc380eb3ab@oracle.com [mike.kravetz@oracle.com: update comment and changelog] Link: http://lkml.kernel.org/r/420bcfd6-158b-38e4-98da-26d0cd85bd01@oracle.comSigned-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
