The tap driver already supports passing in nonblocking state based
on O_NONBLOCK, add support for checking IOCB_NOWAIT as well. With that
done, we can flag it with FMODE_NOWAIT as well.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/8f859870-e6e2-09ca-9c0f-a2aa7c984fb2@kernel.dkSigned-off-by: Jakub Kicinski <kuba@kernel.org>

tun already checks for both O_NONBLOCK and IOCB_NOWAIT in its read
and write iter handlers, so it's fully ready for FMODE_NOWAIT. But
for some reason it doesn't set it. Rectify that oversight.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/3f7dc1f0-79ca-d85c-4d16-8c12c5bd492d@kernel.dkSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Horatiu Vultur says:

====================
net: lan966x: Add support for IS1 VCAP

Provide the Ingress Stage 1 (IS1) VCAP (Versatile Content-Aware
Processor) support for the Lan966x platform.

The IS1 VCAP has 3 lookups and they are accessible with a TC chain id:
- chain 1000000: IS1 Lookup 0
- chain 1100000: IS1 Lookup 1
- chain 1200000: IS1 Lookup 2

The IS1 is capable of different actions like rewrite VLAN tags, change
priority of the frames, police the traffic, etc. These features will be
added at a later point.

The IS1 currently implements the action that allows setting the value
of a PAG (Policy Association Group) key field in the frame metadata and
this can be used for matching in an IS2 VCAP rule. In this way a rule in
IS0 VCAP can be linked to rules in the IS2 VCAP. The linking is exposed
by using the TC "goto chain" action with an offset from the IS2 chain ids.
For example "goto chain 8000001" will use a PAG value of 1 to chain to a
rule in IS2 lookup 0.
====================

Link: https://lore.kernel.org/r/20230307220929.834219-1-horatiu.vultur@microchip.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

IS1 VCAP has it's own list of supported ethernet protocol types which is
different than the IS2 VCAP. Therefore separate the list of known
protocol types based on the VCAP type.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Allow rules to be chained between IS1 VCAP and IS2 VCAP. Chaining
between IS1 lookups or between IS2 lookups are not supported by the
hardware.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Enable TC command to use IS1 VCAP
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add IS1 VCAP port keyset configuration for lan966x and also update debug
fs support to show the keyset configuration.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Provide IS1 (ingress stage 1) VCAP model for lan966x.
This provides classification actions for lan966x.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

NVMEM layouts are no longer registered early, and thus may not yet be
available when Ethernet drivers (or any other consumer) probe, leading
to possible probe deferrals errors. Forward the error code if this
happens. All other errors being discarded, the driver will eventually
use a random MAC address if no other source was considered valid (no
functional change on this regard).
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Marcin Wojtas <mw@semihalf.com>
Link: https://lore.kernel.org/r/20230307192927.512757-1-miquel.raynal@bootlin.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The filename "wangxun" sorts between "intel" and "xscale", but
xscale/Kconfig contains "Intel XScale" prompts, so Wangxun ends up in the
wrong place in the config front-ends.

Move wangxun/Kconfig so the Wangxun devices appear in order in the user
interface.

Fixes: 3ce7547e ("net: txgbe: Add build support for txgbe")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230307221051.890135-1-helgaas@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-03-07 (igc)

This series contains updates to igc driver only.

Muhammad adds tracking and reporting of QBV config errors.

Tan Tee adds support for configuring max SDU for each Tx queue.

Sasha removes check for alternate media as only one media type is
supported.

* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
  igc: Clean up and optimize watchdog task
  igc: offload queue max SDU from tc-taprio
  igc: Add qbv_config_change_errors counter
====================

Link: https://lore.kernel.org/r/20230307221332.3997881-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Keep the accounting schema consistent across different protocols
with __sk_mem_schedule(). Besides, it adjusts a little bit on how
to calculate forward allocated memory compared to before. After
applied this patch, we could avoid receive path scheduling extra
amount of memory.

Link: https://lore.kernel.org/lkml/20230221110344.82818-1-kerneljasonxing@gmail.com/Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230308021153.99777-1-kerneljasonxing@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Florian Westphal says:

====================
Netfilter updates for net-next

1. nf_tables 'brouting' support, from Sriram Yagnaraman.

2. Update bridge netfilter and ovs conntrack helpers to handle
   IPv6 Jumbo packets properly, i.e. fetch the packet length
   from hop-by-hop extension header, from Xin Long.

   This comes with a test BIG TCP test case, added to
   tools/testing/selftests/net/.

3. Fix spelling and indentation in conntrack, from Jeremy Sowden.

* 'main' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
  netfilter: nat: fix indentation of function arguments
  netfilter: conntrack: fix typo
  selftests: add a selftest for big tcp
  netfilter: use nf_ip6_check_hbh_len in nf_ct_skb_network_trim
  netfilter: move br_nf_check_hbh_len to utils
  netfilter: bridge: move pskb_trim_rcsum out of br_nf_check_hbh_len
  netfilter: bridge: check len before accessing more nh data
  netfilter: bridge: call pskb_may_pull in br_nf_check_hbh_len
  netfilter: bridge: introduce broute meta statement
====================

Link: https://lore.kernel.org/r/20230308193033.13965-1-fw@strlen.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use the new devm_of_phy_optional_get() helper instead of open-coding the
same operation.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/01605ea233ff7fc09bb0ea34fc8126af73db83f9.1678280599.git.geert+renesas@glider.beSigned-off-by: Jakub Kicinski <kuba@kernel.org>

neigh_lookup_nodev isn't used in the kernel after removal
of DECnet. So let's remove it.

Fixes: 1202cdd6 ("Remove DECnet support from kernel")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/eb5656200d7964b2d177a36b77efa3c597d6d72d.1678267343.git.leonro@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This field mirrors hrtimer softexpires, we can instead
use the existing helpers.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230308182648.1150762-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Simplify the code by using phy_set_bits().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/b64d9f86-d029-b911-bbe9-6ca6889399d7@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

No users in the tree.  Tested with allmodconfig build.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230308142006.20879-1-fw@strlen.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Since commit 8b41fc44 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.

So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20230308121230.5354-1-nick.alcock@oracle.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Since commit 8b41fc44 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.

So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Jeremy Kerr <jk@codeconstruct.com.au>
Cc: Matt Johnston <matt@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20230308121230.5354-2-nick.alcock@oracle.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Documentation/bpf/bpf_devel_QA.rst
  b7abcd9c ("bpf, doc: Link to submitting-patches.rst for general patch submission info")
  d56b0c46 ("bpf, docs: Fix link to netdev-FAQ target")
https://lore.kernel.org/all/20230307095812.236eb1be@canb.auug.org.au/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Paolo Abeni:
 "Including fixes from netfilter and bpf.

  Current release - regressions:

   - core: avoid skb end_offset change in __skb_unclone_keeptruesize()

   - sched:
      - act_connmark: handle errno on tcf_idr_check_alloc
      - flower: fix fl_change() error recovery path

   - ieee802154: prevent user from crashing the host

  Current release - new code bugs:

   - eth: bnxt_en: fix the double free during device removal

   - tools: ynl:
      - fix enum-as-flags in the generic CLI
      - fully inherit attrs in subsets
      - re-license uniformly under GPL-2.0 or BSD-3-clause

  Previous releases - regressions:

   - core: use indirect calls helpers for sk_exit_memory_pressure()

   - tls:
      - fix return value for async crypto
      - avoid hanging tasks on the tx_lock

   - eth: ice: copy last block omitted in ice_get_module_eeprom()

  Previous releases - always broken:

   - core: avoid double iput when sock_alloc_file fails

   - af_unix: fix struct pid leaks in OOB support

   - tls:
      - fix possible race condition
      - fix device-offloaded sendpage straddling records

   - bpf:
      - sockmap: fix an infinite loop error
      - test_run: fix &xdp_frame misplacement for LIVE_FRAMES
      - fix resolving BTF_KIND_VAR after ARRAY, STRUCT, UNION, PTR

   - netfilter: tproxy: fix deadlock due to missing BH disable

   - phylib: get rid of unnecessary locking

   - eth: bgmac: fix *initial* chip reset to support BCM5358

   - eth: nfp: fix csum for ipsec offload

   - eth: mtk_eth_soc: fix RX data corruption issue

  Misc:

   - usb: qmi_wwan: add telit 0x1080 composition"

* tag 'net-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits)
  tools: ynl: fix enum-as-flags in the generic CLI
  tools: ynl: move the enum classes to shared code
  net: avoid double iput when sock_alloc_file fails
  af_unix: fix struct pid leaks in OOB support
  eth: fealnx: bring back this old driver
  net: dsa: mt7530: permit port 5 to work without port 6 on MT7621 SoC
  net: microchip: sparx5: fix deletion of existing DSCP mappings
  octeontx2-af: Unlock contexts in the queue context cache in case of fault detection
  net/smc: fix fallback failed while sendmsg with fastopen
  ynl: re-license uniformly under GPL-2.0 OR BSD-3-Clause
  mailmap: update entries for Stephen Hemminger
  mailmap: add entry for Maxim Mikityanskiy
  nfc: change order inside nfc_se_io error path
  ethernet: ice: avoid gcc-9 integer overflow warning
  ice: don't ignore return codes in VSI related code
  ice: Fix DSCP PFC TLV creation
  net: usb: qmi_wwan: add Telit 0x1080 composition
  net: usb: cdc_mbim: avoid altsetting toggling for Telit FE990
  netfilter: conntrack: adopt safer max chain length
  net: tls: fix device-offloaded sendpage straddling records
  ...

Pull HID fixes from Benjamin Tissoires:

 - fix potential out of bound write of zeroes in HID core with a
   specially crafted uhid device (Lee Jones)

 - fix potential use-after-free in work function in intel-ish-hid (Reka
   Norman)

 - selftests config fixes (Benjamin Tissoires)

 - few device small fixes and support

* tag 'for-linus-2023030901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: intel-ish-hid: ipc: Fix potential use-after-free in work function
  HID: logitech-hidpp: Add support for Logitech MX Master 3S mouse
  HID: cp2112: Fix driver not registering GPIO IRQ chip as threaded
  selftest: hid: fix hid_bpf not set in config
  HID: uhid: Over-ride the default maximum data buffer value with our own
  HID: core: Provide new max_buffer_size attribute to over-ride the default

Pull m68k fixes from Geert Uytterhoeven:

 - Fix systems with memory at end of 32-bit address space

 - Fix initrd on systems where memory does not start at address zero

 - Fix 68030 handling of bus errors for addresses in exception tables

* tag 'm68k-for-v6.3-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Only force 030 bus error if PC not in exception table
  m68k: mm: Move initrd phys_to_virt handling after paging_init()
  m68k: mm: Fix systems with memory at end of 32-bit address space

We fetch %SR value from sigframe; it might have been modified by signal
handler, so we can't trust it with any bits that are not modifiable in
user mode.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Rich Felker <dalias@libc.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-03-07 (ice)

This series contains updates to ice driver only.

Dave removes masking from pfcena field as it was incorrectly preventing
valid traffic classes from being enabled.

Michal resolves various smatch issues such as not propagating error
codes and returning 0 explicitly.

Arnd Bergmann resolves gcc-9 warning for integer overflow.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  ethernet: ice: avoid gcc-9 integer overflow warning
  ice: don't ignore return codes in VSI related code
  ice: Fix DSCP PFC TLV creation
====================

Link: https://lore.kernel.org/r/20230307220714.3997294-1-anthony.l.nguyen@intel.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Xin Long says:

====================
sctp: add another two stream schedulers

All SCTP stream schedulers are defined in rfc8260#section-3,
First-Come First-Served, Round-Robin and Priority-Based
Schedulers are already added in kernel.

This patchset adds another two schedulers: Fair Capacity
Scheduler and Weighted Fair Queueing Scheduler.

Note that the left one "Round-Robin Scheduler per Packet"
Scheduler is not implemented by this patch, as it's still
intrusive to be added in the current SCTP kernel code.
====================

Link: https://lore.kernel.org/r/cover.1678224012.git.lucien.xin@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

As it says in rfc8260#section-3.6 about the weighted fair queueing
scheduler:

   A Weighted Fair Queueing scheduler between the streams is used.  The
   weight is configurable per outgoing SCTP stream.  This scheduler
   considers the lengths of the messages of each stream and schedules
   them in a specific way to use the capacity according to the given
   weights.  If the weight of stream S1 is n times the weight of stream
   S2, the scheduler should assign to stream S1 n times the capacity it
   assigns to stream S2.  The details are implementation dependent.
   Interleaving user messages allows for a better realization of the
   capacity usage according to the given weights.

This patch adds Weighted Fair Queueing Scheduler actually based on
the code of Fair Capacity Scheduler by adding fc_weight into struct
sctp_stream_out_ext and taking it into account when sorting stream->
fc_list in sctp_sched_fc_sched() and sctp_sched_fc_dequeue_done().
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

As it says in rfc8260#section-3.5 about the fair capacity scheduler:

   A fair capacity distribution between the streams is used.  This
   scheduler considers the lengths of the messages of each stream and
   schedules them in a specific way to maintain an equal capacity for
   all streams.  The details are implementation dependent.  interleaving
   user messages allows for a better realization of the fair capacity
   usage.

This patch adds Fair Capacity Scheduler based on the foundations added
by commit 5bbbbe32 ("sctp: introduce stream scheduler foundations"):

A fc_list and a fc_length are added into struct sctp_stream_out_ext and
a fc_list is added into struct sctp_stream. In .enqueue, when there are
chunks enqueued into a stream, this stream will be linked into stream->
fc_list by its fc_list ordered by its fc_length. In .dequeue, it always
picks up the 1st skb from stream->fc_list. In .dequeue_done, fc_length
is increased by chunk's len and update its location in stream->fc_list
according to the its new fc_length.

Note that when the new fc_length overflows in .dequeue_done, instead of
resetting all fc_lengths to 0, we only reduced them by U32_MAX / 4 to
avoid a moment of imbalance in the scheduling, as Marcelo suggested.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Russell King says:

====================
Various mtk_eth_soc cleanups

Here are a number of patches that do a bit of cleanup to mtk_eth_soc.

The first patch cleans up mtk_gmac0_rgmii_adjust(), which is the
troublesome function preventing the driver becoming a post-March2020
phylink driver. It doesn't solve that problem, merely makes the code
easier to follow by getting rid of repeated tenary operators.

The second patch moves the check for DDR2 memory to the initialisation
of phylink's supported_interfaces - if TRGMII is not possible for some
reason, we should not be erroring out in phylink MAC operations when
that can be determined prior to phylink creation.

The third patch removes checks from mtk_mac_config() that are done
when initialising supported_interfaces - phylink will not call
mtk_mac_config() with an interface that was not marked as supported,
so these checks are redundant.

The last patch removes the remaining vestiges of REVMII and RMII
support, which appears to be entirely unused.

These shouldn't conflict with Daniel's patch set, but if they do I
will rework as appropriate.
====================

Link: https://lore.kernel.org/r/ZAdj9qUXcHUsK7Gt@shell.armlinux.org.ukSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Since the conversion of mtk_eth_soc to phylink's supported_interfaces
bitmap, these two modes have not been selectable. No one has raised
this as an issue. Checking the in-kernel DT files, none of them use
either of these modes with this hardware.

Daniel Golle concurs:

 A quick grep through the device trees of the more than 650 ramips and
 mediatek boards we support in OpenWrt has revealed that *none* of them
 uses either reduced-MII or reverse-MII PHY modes. I could imaging that
 some more specialized ramips boards may use the RMII 100M PHY mode to
 connect with exotic PHYs for industrial or automotive applications
 (think: for 100BASE-T1 PHY connected via RMII). I have never seen or
 touched such boards, but there are hints that they do exist.

 For reverse-MII there are cases in which the Ralink SoC (Rt305x, for
 example) is used in iNIC mode, ie. connected as a PHY to another SoC,
 and running only a minimal firmware rather than running Linux. Due to
 the lack of external DRAM for the Ralink SoC on this kind of boards,
 the Ralink SoC there will anyway never be able to boot Linux.
 I've seen this e.g. in multimedia devices like early WiFi-connected
 not-yet-so-smart TVs.

Consequently, the conclusion is that no one uses these modes with this
hardware, so we might as well drop support for them.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

mtk_mac_config() checks that the interface mode is permitted for the
capabilities, but we already do these checks in mtk_add_mac() when
initialising phylink's supported_interfaces bitmap. Remove the
unnecessary tests.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

If TRGMII mode is not permitted when using DDR2 mode, we should handle
that when setting up phylink's ->supported_interfaces so phylink knows
that this is not supported by the hardware. Move this check to
mtk_add_mac().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Get rid of the multiple tenary operators in mtk_gmac0_rgmii_adjust()
replacing them with a single if(), thus making the code easier to read.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Bjorn Helgaas says:

====================
PCI/AER: Remove redundant Device Control Error Reporting Enable

From: Bjorn Helgaas <bhelgaas@google.com>

Since f26e58bf ("PCI/AER: Enable error reporting when AER is native"),
which appeared in v6.0, the PCI core has enabled PCIe error reporting for
all devices during enumeration.

Remove driver code to do this and remove unnecessary includes of
<linux/aer.h> from several other drivers.

Intel folks, sorry that I missed removing the <linux/aer.h> includes in the
first series.
====================

Link: https://lore.kernel.org/r/20230307181940.868828-1-helgaas@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

<linux/aer.h> is unused, so remove it.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

<linux/aer.h> is unused, so remove it.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

<linux/aer.h> is unused, so remove it.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

<linux/aer.h> is unused, so remove it.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

<linux/aer.h> is unused, so remove it.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>