into home.transmeta.com:/home/torvalds/v2.5/linux

  - save_flags/cli/restore_flags removal
  - updated USB code for 2.5
  - fixed SPARC configuration
  - fixed spinlock/sleep race in PCM midlevel

into nuts.ninka.net:/home/davem/src/BK/net-2.5

into home.transmeta.com:/home/torvalds/v2.5/linux

Fix the tests for readdir reply truncation so that we don't get
uncalled for kernel verbiage.

into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux

into mandrakesoft.com:/home/jgarzik/repo/net-drivers-2.5

into mandrakesoft.com:/home/jgarzik/repo/net-drivers-2.5

  - deleted sound/pci/ice1712.c
  - fixed Makefile to point to sound/pci/ice1712 directory
  - added Ensoniq SoundScape header file and HWDEP IFACE
  - CS4231
    - added CS4231_HW_AD1845 and register definitions for AD1845
  - USB
    - added snd-rawmidi.o to the snd-usb-audio's dependency if sequencer is
  - PCI DMA allocation
    - fixed the wrapper again
  - AC'97 codec
    - added HSD11246 identification (Conexant), a bit improved proc contents
  - CMIPCI
    - changed the DMA configuration for period size
    - fixed compile with SOFT_AC3 option
    - added PCM_INFO_PAUSE to hw settings.  now pause should work properly
    - corrected the modem on/off bit (FLINK)
  - ICE1712
    - compilation fixes
  - intel8x0
    - use mmio for codec on nforce (pci resource 2)
    - clean up and fix ali5455 codes
  - RME32
    - enable 88.2/96kHz on capture with CS8414
  - VIA82xx
    - fixed the size of allocated bd array to be released
    - fixed the allocation size of idx_table
  - PPC Awacs
    - replaced one more mdelay() with schedule
    - try to touch mic boost on screamer at init
  - USB Audio
    - reset each interface at initialization
    - reset the old interface if a new interface is chosen
    - don't claim the interface which already claimed

  - changed bitmap_member -> DECLARE_BITMAP
  - EMU10K1
    - added gpr_list_control* variables to emu10k1_fx8010_code_t
    - added snd_emu10k1_list_controls for code_peek() and fixes few typos
  - ICE1712
    - split ice1712 code to several files for better readability

  - OSS mixer emulation
    - save the current volume values permanently
  - PCM midlevel
    - fixed 64bit division on non-ix86 32bit architectures
    - exported snd_pcm_new_stream()
  - PCI DMA allocation
    - fixes and updates
  - PCM Scatter-Gather code
    - don't set runtime->dma_bytes if runtime is null
  - CMI8330 - fix nor non-IsaPnP build
  - CMIPCI - added "Mic As Center/LFE" switch for model 039 or later
  - more initialization of structs in C99 style
  - intel8x0 - fixes for nvidia nforce
  - Maestro3 - added quirk for CF72 toughbook
  - VIA82xx - reset codec only when it's not ready
  - USB Audio
    - fixed oops at unloading if non-intialized substream exists
    - show interface number in proc files
    - clean up and fixed the parser of audio streams

  - AC'97 codec
    - added support/detection for MC'97 (modem codecs)
    - improved/updated register bit constants
    - AD1980 codec ID with patch code
    - added eMicro and Philips UCB1400 codecs
  - PCM Scatter-Gather support
    - added a function snd_pcm_sgbuf_get_addr()
  - rewritten PCI DMA allocation
  - ENS1371 - fixed IEC958 control index when AC'97 codec has S/PDIF capability, too
  - intel8x0
    - don't break when second codec cannot be initialized
  - via82xx
    - improved sg buffer handling
    - added "Input Source Select" control for via8233
    - fixed the registers for via8233
    - fixed the detection of via8233 chip
    - clean up the configuration of bd arrays
  - USB Audio
    - added the missing initialization of curframesize field (fixes capture)

  - VIA686 and VIA8233 driver merge to VIA82xx
  - ioctl32 fixes
  - fixed OOPS in snd_pcm_sgbuf_delete (not initialized)
  - I2C - call hw_stop() before returning at the error pointer
  - AC'97 codec - added more AC97 IDs by Laszlo Melis
  - CS46xx - mutex initialization fix
  - ENS1371 - added one more card to S/PDIF capabilities
  - intel8x0
    - fixed secondary and third codec indexes
  - PPC Keywest - initialize MCS in loop until it succeeds
  - PPC Tumbler - the initial support for snapper (TAS3004) on some tibook
  - USB Audio - mixer fixes

  - AC'97 codec
    - added ac97_can_amap() condition
    - removed powerup/powerdown sequence when sample rate is changed
    - added ac97_is_rev22 check function
    - added AC97_EI_* defines
    - available rates are in array
  - CS46xx
    - improved the SCB link mechanism
    - SMP deadlock should have been fixed now
  - OSS mixer emulation
    - added the proc interface for the configuration of OSS mixer volumes
  - rawmidi midlevel
    - removed unused snd_rawmidi_transmit_reset and snd_rawmidi_receive_reset functions
  - USB MIDI driver
    - integration of USB MIDI driver into USB audio driver by Clemens
  - intel8x0 - the big intel8x0 driver update
    - added support for ICH4
    - rewrited I/O (the third AC'97 codec registers are available only through memory)
    - code cleanups
    - ALI5455 specific code
    - added proc interface
  - VIA686, VIA8233
    - set the max periods to 128

  - CS46xx
    - SPDIF input fixes
    - fixed missplaced #ifndef
    - amplifier fix for Game Theater XP
    - refine on the PCM multichannel functionality
  - EMU10K1
    - added the support for Audigy spdif controls
  - PCM midlevel
    - fixed hw_free (wrong state for drivers with no callback
    - fixed sw_params (runtime) lock
  - AC'97 codec
    - fixed spin deadlock
  - CS4281
    - fixed wrong mdelays and allowed scheduling in module_init
  - PPC drivers
    - added the missing inclusion of linux/slab.h
  - USB MIDI driver
    - replaced urb_t -> struct urb

  - C99 structure initializers - second set of changes
  - USB MIDI driver
    - more device info for Roland/EDIROL devices

  - added USB Audio and USB MIDI drivers
  - VIA686
    - AC97 cold reset only when AC-link is down

  - C99-like structure initializers - first bunch of changes
  - CS46xx
    - fixed the compile with the older image
  - AC'97 codec
    - added the ids for ITE chips
    - check the validity of registers always in the limited register mode
  - intel8x0
    - allow ICH4 to proceed without probing PCR / SCR bits
  - VIA686
    - AC97 cold reset only when AC-link is down

  - removed __NO_VERSION__
  - CS46xx
    - SDPIF input support, only 48khz
    - PCM multichannel bug fix
  - EMU10K1
    - Added workaround for EMU10K1 capture (wrong pointer)
  - Keywest (PPC)
    - fixed the initialization of driver

  - Corrections for PCM sample silence (24-bits)
  - OPL3 code fixes (delays)
  - CS4281
    - added the power management code
    - added mixer controls for internal FM and PCM volumes
  - EMU10K1
    - fixed the dma mask
  - ICE1712
    - replaced EREMOTE with EIO
    - check the return value from ews88mt_chip_select()
  - Maestro3
    - corrected the wrong pci id for inspiron 8000
    - use the quirk list for gpio workarounds

This cleans up swsusp a little bit and fixes ide disk corruption on
suspend/resume.
									Pavel

I see you just applied my patch to make destroy_workqueue do the
flush.  Fix up XFS for it.

into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux

This is a huge performance drop for SMP, but at least XFS is working
again.  Expect a better solution soon.

This is the next iteration of the workqueue abstraction.

The framework includes:

 - per-CPU queueing support.

on SMP there is a per-CPU worker thread (bound to its CPU) and per-CPU
work queues - this feature is completely transparent to workqueue-users.
keventd automatically uses this feature. XFS can now update to work-queues
and have the same per-CPU performance as it had with its per-CPU worker
threads.

 - delayed work submission

there's a new queue_delayed_work(wq, work, delay) function and a new
schedule_delayed_work(work, delay) function. The later one is used to
correctly fix former tq_timer users. I've reverted those changes in 2.5.40
that changed tq_timer uses to schedule_work() - eg. in the case of
random.c or the tty flip queue it was definitely the wrong thing to do.

delayed work means a timer embedded in struct work_struct.  I considered
using split struct work_struct and delayed_work_struct types, but lots
of code actively uses task-queues in both delayed and non-delayed mode,
so i went for the more generic approach that allows both methods of work
submission.  Delayed timers do not cause any other overhead in the
normal submission path otherwise.

 - multithreaded run_workqueue() implementation

the run_workqueue() function can now be called from multiple contexts, and
a worker thread will only use up a single entryy - this property is used
by the flushing code, and can potentially be used in the future to extend
the number of per-CPU worker threads.

 - more reliable flushing

there's now a 'pending work' counter, which is used to accurately detect
when the last work-function has finished execution. It's also used to
correctly flush against timed requests. I'm not convinced whether the old
keventd implementation got this detail right.

 - i switched the arguments of the queueing function(s) per Jeff's
   suggestion, it's more straightforward this way.


Driver fixes:

i have converted almost every affected driver to the new framework. This
cleaned up tons of code. I also fixed a number of drivers that were still
using BHs (these drivers did not compile in 2.5.40).

while this means lots of changes, it might ease the QA decision whether to
put this patch into 2.5.

The pach converts roughly 80% of all tqueue-using code to workqueues - and
all the places that are not converted to workqueues yet are places that do
not compile in vanilla 2.5.40 anyway, due to unrelated changes. I've
converted a fair number of drivers that do not compile in 2.5.40, and i
think i've managed to convert every driver that compiles under 2.5.40.