Just remove duplicates among the asm-*/errno.h.

11 out of our 17 architectures have basically the same code
in arch/../kernel/signal.c:do_signal.  This patch creates a
common function for that bit of code and uses it in the places
it can be.

The 2.5.15 version of this patch builds and runs on i386 and PPC and has
been briefly looked at by the CRIS, PARISC, PPC64 and x86_64 maintainers.

As a bonus, this fixes the "ignore SIGURG" bug for 9 more architectures
(i386 and PPC already were fixed).

This patch creates asm-generic/siginfo.h and uses it to remove a
lot of duplicate code in the various asm-*/siginfo.h files.  Some
if it is a little ugly, but I think it will be worth it just to
help us eliminate some of the bugs that have come from code copying.

This patch moves a version of copy_siginfo_to_user that is common to
ten of our architectures into the gerneic code and allows the other
architectures to override it.  I suspect more of the remaining
architectures will be able to use it as well once it is fixed (patch
to follow).

- alpha_using_srm is #define'd for machine specific kernels, but
  is a real integer variable for generic Alpha kernels. Export
  it...

- The callback_* functions are _always_ there (they might be NOP
  functions owith generic kernels on non-SRM machines).

- srm_env can now be compiled on generic alpha kernels. An
  explicit check for SRM capability was always there:-)

into home.transmeta.com:/home/torvalds/v2.5/linux

This patch provides the ability for a block driver to signal it's too
busy to receive more work and temporarily halt the request queue. In
concept it's similar to the networking netif_{start,stop}_queue helpers.

To do this cleanly, I've ripped out the old tq_disk task queue. Instead
an internal list of plugged queues is maintained which will honor the
current queue state (see QUEUE_FLAG_STOPPED bit). Execution of
request_fn has been moved to tasklet context. blk_run_queues() provides
similar functionality to the old run_task_queue(&tq_disk).

Now, this only works at the request_fn level and not at the
make_request_fn level. This is on purpose: drivers working at the
make_request_fn level are essentially providing a piece of the block
level infrastructure themselves. There are basically two reasons for
doing make_request_fn style setups:

o block remappers. start/stop functionality will be done at the target
  device in this case, which is the level that will signal hardware full
  (or continue) anyways.

o drivers who wish to receive single entities of "buffers" and not
  merged requests etc. This could use the start/stop functionality. I'd
  suggest _still_ using a request_fn for these, but set the queue
  options so that no merging etc ever takes place. This has the added
  bonus of providing the usual request depletion throttling at the block
  level.

It looks like a race betwen exec_mmap and access_process_vm in
proc_pid_cmdline (or any other procfs functions that uses
access_process_vm).

o blk_get_request() and blk_put_request() needs exporting
o blk_max_pfn is used by BLOCK_BOUNCE_ANY, which modular SCSI needs

> Hmm. That patch does not compile. "p->cpu" does not exist, it's
> "p->thread_info->cpu". Tssk.

Ouch, I am bad.  Sorry.

Make the ChangeLog entry something really defamatory.

	Robert Love

This is William Irwin's algorithmically O(1) version of
count_active_tasks (which is currently O(n) for n total tasks on the
system).

I like it a lot: we become O(1) because now we count uninterruptible
tasks, so we can return (nr_uninterruptible + nr_running).  It does not
introduce any overhead or hurt the case for small n, so I have no
complaints.

This copy has a small optimization over the original posting, but is
otherwise the same thing wli posted earlier.  I have tested to make sure
this returns accurate results and that the kernel profile improves.

Previously assigned resources are perfectly valid - just silently
ignore them.

Attached patch adds output of rt_priority and policy to
/proc/<pid>/stats.

This will not break compatibility with existing applications and will
allow ps(1) and friends to display pertinent scheduling information.

Please apply this patch to let binfmt_em86.c compile again.

As pointed out by Russell King, resource name pointers
of the secondary PCI buses are left uninitialized in the
non-x86 PCI allocation path.

Assigning these pointers in pci_add_new_bus() fixes the problem.

into home.transmeta.com:/home/torvalds/v2.5/linux

 - Eliminate all usages of the obscure QUEUE_EMPTY macro.

 - Eliminate all unneccessary checks for RQ_INACTIVE, this can't happen during
   the time we run the request strategy routine of a single major number block
   device. Perhaps the still remaining usage in scsi and i2o_block.c should be
   killed as well, since the upper ll_rw_blk layer shouldn't pass inactive
   requests down.

Those are all places where we have deeply burried and hidden major number
indexed arrays. Let's deal with them slowly...

Since apparently no body else did care thus far, and since I'm using
this driver, well here it comes:

 - Adjust the airo wireless LAN card driver for the fact that modules
   don't export symbols by default any longer.

 - Make some stuff which obivously should be static there static as well.
   (Plenty of code in Linux actually deserves a review for this
   far too common bug...)

 - Replace ide_delay_50m with mdelay(50). There is absolutely no reason we
   should behave different behaviors whatever IDECS support is enabled or not.

 - Kill last parameter of ide_register_hw(). It should return a pointer to the
   interface registered later.

 - pdc202xx patches by Bartomiej onierkiewicz.

 - ServerWorks chi pset support cleanup by Andrej Panin.

 - Move temporarily ide_setup_ports to main.c unfold it in ide-pnp.c.

This fixes three locations in net/ where per-CPU data could bite us
under preemption.  This is the result of an audit I did and should
constitute all of the unsafe code in net/.

In net/core/skbuff.c I did not have to introduce any code - just
rearrange the grabbing of smp_processor_id() to be in the interrupt off
region.  Pretty clean fixes.

Note in the future we can use put_cpu() and get_cpu() to grab the CPU#
safely.  I will send a patch to Marcelo so we can have a 2.4 version
(which doesn't do the preempt stuff), too...

This adds an optimization to set_cpus_allowed: if the task is not
running, there is no sense in kicking the migration_threads into action,
we just need to update task->cpu.  This was suggested by Mike Kravetz.

Besides being an optimization, this would prevent any future race
between set_cpus_allowed and the migration_threads.

This adds documentation about the O(1) scheduler to Documentation/.  The
new scheduler is complicated and providing future scheduler hackers some
background seems a Good Thing to me.

Specifically:

- add Documentation/sched-coding.txt: an overview of the functions,
  magic numbers, and variables in the scheduler as well as (most
  importantly) a review of the locking semantics.

- add Documentation/sched-design.txt: an edited version of Ingo's
  initial email to lkml about his scheduler.  Goes over the design,
  implementation, and goals of the scheduler.  I tried to edit it where
  needed to bring it in line with the scheduler as it is today.

- modify kernel/sched.c: update your copyright and add a change entry
  for the new scheduler.

The attached trivial patch simply changes the printk debug statement in
do_exit when preempt_count!=0 to say "note" instead of "error" and log
at KERN_INFO in lieu of KERN_ERR.

I want to keep the message around a bit, but people get too paranoid
when things like nfsd legitimately exit with a preempt_count=1.

This makes sure that sys_sync() will terminate.  It counts up the
number of dirty pages in the machine and will refuse to write out more
than 1.25 times this number of pages.  This function is called twice
on the sys_sync() path, so the kernel will actually write 2.5x the number
of initially-dirty pages before giving up.

It might reduce pagemap_lru_lock hold times a little, and is more
consistent.  I think all global page accounting is now inside
page_states[].

Factor out some similar code in page_alloc.c

For historical reasons, ext3 has a private BH state bit which has
global scope.  This patch moves it inside ext3.

Patch from Anton Blanchard which replaces

	printk(KERN_FOO __FUNCTION__ ": msg");

with
	printk(KERN_FOO "%s: msg", __FUNCTION__);

in ext3.

Fixes all the goto spaghetti in generic_file_write() and turns it into
something which humans can understand.

Andi tells me that gcc3 does a decent job of relocating blocks out of
line anyway.  This patch gives the compiler a helping hand with
appropriate use of likely() and unlikely().

Random cleanup: remove the mem_map_t typedef.  Just use 'struct page'
everywhere.

An implementation of directory-synchronous mounts.

I sent this out some months ago and it didn't generate a lot of
interest.  Later we had one of the usual cheery exchanges with Wietse
Venema (postfix development) and he agreed that directory synchronous
mounts were something that he could use, and that there was benefit in
implementing them in Linux.  If you choose to apply this I'll push the
2.4 patch.



Patch against e2fsprogs-1.26:
        http://www.zip.com.au/~akpm/linux/dirsync/e2fsprogs-1.26.patch

Patch against util-linux-2.11n:
        http://www.zip.com.au/~akpm/linux/dirsync/util-linux-2.11n.patch


The kernel patch includes implementations for ext2 and ext3. It's
pretty simple.

- When dirsync is in operation against a directory, the following operations
  are synchronous within that directory:  create, link, unlink, symlink,
  mkdir, rmdir, mknod, rename (synchronous if either the source or dest
  directory is dirsync).

- dirsync is a subset of sync.  So `mount -o sync' or `chattr +S'
  give you everything which `mount -o dirsync' or `chattr +D' gives,
  plus synchronous file writes.

- ext2's inode.i_attr_flags is unused, and is removed.

- mount /dev/foo /mnt/bar -o dirsync  works as expected.

- An ext2 or ext3 directory tree can be set dirsync with `chattr +D -R'.

- dirsync is maintained as new directories are created under
  a `chattr +D' directory.  Like `chattr +S'.

- Other filesystems can trivially be taught about dirsync.  It's just
  a matter of replacing `IS_SYNC(inode)' with `IS_DIRSYNC(inode)' in
  the directory update functions.  IS_SYNC will still be honoured when
  IS_DIRSYNC is used.

- Non-directory files do not have their dirsync flag propagated.  So
  an S_ISREG file which is created inside a dirsync directory will not
  have its dirsync bit set.  chattr needs to do this as well.

- There was a bit of version skew between e2fsprogs' idea of the
  inode flags and the kernel's.  That is sorted out here.

- `lsattr' shows the dirsync flag as "D".  The letter "D" was
  previously being used for Compressed_Dirty_File.  I changed
  Compressed_Dirty_File to use "Z".  Is that OK?

The mount(2) manpage needs to be taught about MS_DIRSYNC.

Spot the difference:

aops.readpage
aops.readpages
aops.writepage
aops.writeback_mapping

The patch renames `writeback_mapping' to `writepages'

Turn on multipage no-buffers reads for ext3.