- 11 Oct, 2021 9 commits
-
-
Randy Dunlap authored
Clean up all of the kernel-doc issues in drm_connector.c: drivers/gpu/drm/drm_connector.c:2611: warning: Excess function parameter 'connector' description in 'drm_connector_oob_hotplug_event' drivers/gpu/drm/drm_connector.c:2611: warning: Function parameter or member 'connector_fwnode' not described in 'drm_connector_oob_hotplug_event' drm_connector.c:630: warning: No description found for return value of 'drm_get_connector_status_name' drm_connector.c:715: warning: No description found for return value of 'drm_connector_list_iter_next' drm_connector.c:785: warning: No description found for return value of 'drm_get_subpixel_order_name' drm_connector.c:816: warning: No description found for return value of 'drm_display_info_set_bus_formats' drm_connector.c:1331: warning: No description found for return value of 'drm_mode_create_dvi_i_properties' drm_connector.c:1412: warning: No description found for return value of 'drm_connector_attach_content_type_property' drm_connector.c:1492: warning: No description found for return value of 'drm_mode_create_tv_margin_properties' drm_connector.c:1534: warning: No description found for return value of 'drm_mode_create_tv_properties' drm_connector.c:1627: warning: No description found for return value of 'drm_mode_create_scaling_mode_property' drm_connector.c:1944: warning: No description found for return value of 'drm_mode_create_suggested_offset_properties' drm_connector.c:2315: warning: missing initial short description on line: * drm_connector_set_panel_orientation_with_quirk - [The last warning listed is probably a quirk/bug in scripts/kernel-doc.] Fixes: 613051da ("drm: locking&new iterators for connector_list") Fixes: 52217195 ("drm: Extract drm_connector.[hc]") Fixes: b3c6c8bf ("drm: document drm_display_info") Fixes: 50525c33 ("drm: content-type property for HDMI connector") Fixes: 6c4f52dc ("drm/connector: Allow creation of margin props alone") Fixes: 69654c63 ("drm/connector: Split out orientation quirk detection (v2)") Fixes: 72ad4968 ("drm/connector: Add support for out-of-band hotplug notification (v3)") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Derek Basehore <dbasehore@chromium.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211010224459.3603-1-rdunlap@infradead.org
-
Uwe Kleine-König authored
Up to now s6e63m0_remove() returns zero unconditionally. Make it return void instead which makes it easier to see in the callers that there is no error to handle. Also the return value of spi remove callbacks is ignored anyway. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Tvrtko Ursulin authored
Cache the count of shared fences in the iterator to avoid dereferencing the dma_resv_object outside the RCU protection. Otherwise iterator and its users can observe an incosistent state which makes it impossible to use safely. Such as: <6> [187.517041] [IGT] gem_sync: executing <7> [187.536343] i915 0000:00:02.0: [drm:i915_gem_context_create_ioctl [i915]] HW context 1 created <7> [187.536793] i915 0000:00:02.0: [drm:i915_gem_context_create_ioctl [i915]] HW context 1 created <6> [187.551235] [IGT] gem_sync: starting subtest basic-many-each <1> [188.935462] BUG: kernel NULL pointer dereference, address: 0000000000000010 <1> [188.935485] #PF: supervisor write access in kernel mode <1> [188.935495] #PF: error_code(0x0002) - not-present page <6> [188.935504] PGD 0 P4D 0 <4> [188.935512] Oops: 0002 [#1] PREEMPT SMP NOPTI <4> [188.935521] CPU: 2 PID: 1467 Comm: gem_sync Not tainted 5.15.0-rc4-CI-Patchwork_21264+ #1 <4> [188.935535] Hardware name: /NUC6CAYB, BIOS AYAPLCEL.86A.0049.2018.0508.1356 05/08/2018 <4> [188.935546] RIP: 0010:dma_resv_get_fences+0x116/0x2d0 <4> [188.935560] Code: 10 85 c0 7f c9 be 03 00 00 00 e8 15 8b df ff eb bd e8 8e c6 ff ff eb b6 41 8b 04 24 49 8b 55 00 48 89 e7 8d 48 01 41 89 0c 24 <4c> 89 34 c2 e8 41 f2 ff ff 49 89 c6 48 85 c0 75 8c 48 8b 44 24 10 <4> [188.935583] RSP: 0018:ffffc900011dbcc8 EFLAGS: 00010202 <4> [188.935593] RAX: 0000000000000000 RBX: 00000000ffffffff RCX: 0000000000000001 <4> [188.935603] RDX: 0000000000000010 RSI: ffffffff822e343c RDI: ffffc900011dbcc8 <4> [188.935613] RBP: ffffc900011dbd48 R08: ffff88812d255bb8 R09: 00000000fffffffe <4> [188.935623] R10: 0000000000000001 R11: 0000000000000000 R12: ffffc900011dbd44 <4> [188.935633] R13: ffffc900011dbd50 R14: ffff888113d29cc0 R15: 0000000000000000 <4> [188.935643] FS: 00007f68d17e9700(0000) GS:ffff888277900000(0000) knlGS:0000000000000000 <4> [188.935655] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [188.935665] CR2: 0000000000000010 CR3: 000000012d0a4000 CR4: 00000000003506e0 <4> [188.935676] Call Trace: <4> [188.935685] i915_gem_object_wait+0x1ff/0x410 [i915] <4> [188.935988] i915_gem_wait_ioctl+0xf2/0x2a0 [i915] <4> [188.936272] ? i915_gem_object_wait+0x410/0x410 [i915] <4> [188.936533] drm_ioctl_kernel+0xae/0x140 <4> [188.936546] drm_ioctl+0x201/0x3d0 <4> [188.936555] ? i915_gem_object_wait+0x410/0x410 [i915] <4> [188.936820] ? __fget_files+0xc2/0x1c0 <4> [188.936830] ? __fget_files+0xda/0x1c0 <4> [188.936839] __x64_sys_ioctl+0x6d/0xa0 <4> [188.936848] do_syscall_64+0x3a/0xb0 <4> [188.936859] entry_SYSCALL_64_after_hwframe+0x44/0xae If the shared object has changed during the RCU unlocked period callers will correctly handle the restart on the next iteration. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: 96601e8a ("dma-buf: use new iterator in dma_resv_copy_fences") Fixes: d3c80698 ("dma-buf: use new iterator in dma_resv_get_fences v3") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4274 Cc: Christian König <christian.koenig@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Link: https://patchwork.freedesktop.org/patch/msgid/20211008095007.972693-1-tvrtko.ursulin@linux.intel.comReviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/nouveau/nouveau_bo.c: In function ‘nouveau_ttm_tt_populate’: drivers/gpu/drm/nouveau/nouveau_bo.c:1228:17: warning: variable ‘dev’ set but not used [-Wunused-but-set-variable] drivers/gpu/drm/nouveau/nouveau_bo.c: In function ‘nouveau_ttm_tt_unpopulate’: drivers/gpu/drm/nouveau/nouveau_bo.c:1252:17: warning: variable ‘dev’ set but not used [-Wunused-but-set-variable] Cc: Ben Skeggs <bskeggs@redhat.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: Jeremy Kolb <jkolb@brandeis.edu> Cc: dri-devel@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by:
Lee Jones <lee.jones@linaro.org> Reviewed-by:
Karol Herbst <kherbst@redhat.com> Signed-off-by:
-
Yang Yingliang authored
Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Reviewed-by:
-
Luo penghao authored
In order to keep the code style consistency of the whole file, the 'inst' assignments should be deleted. The clang_analyzer complains as follows: drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgp100.c:499:8: warning: Although the value storedto 'inst' is used in the enclosing expression, the value is never actually read from 'inst'. Karol: Removed unneeded brackets. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Luo penghao <luo.penghao@zte.com.cn> Reviewed-by:
-
Luo penghao authored
In order to keep the code style consistency of the whole file, the 'ret' assignments should be deleted. The clang_analyzer complains as follows: drivers/gpu/drm/nouveau/nvkm/subdev/mmu/uvmm.c:317:8:warning: Although the value storedto 'ret' is used in the enclosing expression, the value is never actually read from 'ret'. Reported-by:
-
yong yiran authored
'priv.h' included in 'base.c' is duplicated. Remove all but the first include of priv.h from base.c. Reported-by:
yong yiran <yong.yiran@zte.com.cn> Reviewed-by:
-
Jing Xiangfeng authored
virtio_gpu_user_framebuffer_create() misses to call drm_gem_object_put() in an error path. Add the missed function call to fix it. Signed-off-by:
Jing Xiangfeng <jingxiangfeng@huawei.com> Link: http://patchwork.freedesktop.org/patch/msgid/1633770560-11658-1-git-send-email-jingxiangfeng@huawei.comSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
- 10 Oct, 2021 5 commits
-
-
Dmitry Baryshkov authored
Add driver to support Sharp LS06T1SX01 FullHD panel. The panel uses nt35695 driver IC. For example this LCD module can be found in the kwaek.ca Dragonboard Display Adapter Bundle. Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by:
-
Dmitry Baryshkov authored
Add devicetree bindings for the Sharp LS060T1SX01 6.0" FullHD panel using NT35695 driver. This panel can be found i.e. in the Dragonboard Display Adapter bundle. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Marek Vasut authored
Decoder input LVDS format is a property of the decoder chip or even its strapping. Handle data-mapping the same way lvds-panel does. In case data-mapping is not present, do nothing, since there are still legacy bindings which do not specify this property. Signed-off-by:
Marek Vasut <marex@denx.de> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
-
Marek Vasut authored
Decoder input LVDS format is a property of the decoder chip or even its strapping. Add DT property data-mapping the same way lvds-panel does, to define the LVDS data mapping. Reviewed-by:
-
Zheyu Ma authored
savagefb and some other drivers call kfree to free 'info->pixmap.addr' even after calling unregister_framebuffer, which may cause double free. Fix this by setting 'fb_info->pixmap.addr' to NULL after kfree in unregister_framebuffer. The following log reveals it: [ 37.318872] BUG: KASAN: double-free or invalid-free in kfree+0x13e/0x290 [ 37.319369] [ 37.320803] Call Trace: [ 37.320992] dump_stack_lvl+0xa8/0xd1 [ 37.321274] print_address_description+0x87/0x3b0 [ 37.321632] ? kfree+0x13e/0x290 [ 37.321879] ? kfree+0x13e/0x290 [ 37.322126] ? kfree+0x13e/0x290 [ 37.322374] kasan_report_invalid_free+0x58/0x90 [ 37.322724] ____kasan_slab_free+0x123/0x140 [ 37.323049] __kasan_slab_free+0x11/0x20 [ 37.323347] slab_free_freelist_hook+0x81/0x150 [ 37.323689] ? savagefb_remove+0xa1/0xc0 [savagefb] [ 37.324066] kfree+0x13e/0x290 [ 37.324304] savagefb_remove+0xa1/0xc0 [savagefb] [ 37.324655] pci_device_remove+0xa9/0x250 [ 37.324959] ? pci_device_probe+0x7d0/0x7d0 [ 37.325273] device_release_driver_internal+0x4f7/0x7a0 [ 37.325666] driver_detach+0x1e8/0x2c0 [ 37.325952] bus_remove_driver+0x134/0x290 [ 37.326262] ? sysfs_remove_groups+0x97/0xb0 [ 37.326584] driver_unregister+0x77/0xa0 [ 37.326883] pci_unregister_driver+0x2c/0x1c0 [ 37.336124] [ 37.336245] Allocated by task 5465: [ 37.336507] ____kasan_kmalloc+0xb5/0xe0 [ 37.336801] __kasan_kmalloc+0x9/0x10 [ 37.337069] kmem_cache_alloc_trace+0x12b/0x220 [ 37.337405] register_framebuffer+0x3f3/0xa00 [ 37.337731] foo_register_framebuffer+0x3b/0x50 [savagefb] [ 37.338136] [ 37.338255] Freed by task 5475: [ 37.338492] kasan_set_track+0x3d/0x70 [ 37.338774] kasan_set_free_info+0x23/0x40 [ 37.339081] ____kasan_slab_free+0x10b/0x140 [ 37.339399] __kasan_slab_free+0x11/0x20 [ 37.339694] slab_free_freelist_hook+0x81/0x150 [ 37.340034] kfree+0x13e/0x290 [ 37.340267] do_unregister_framebuffer+0x21c/0x3d0 [ 37.340624] unregister_framebuffer+0x23/0x40 [ 37.340950] savagefb_remove+0x45/0xc0 [savagefb] [ 37.341302] pci_device_remove+0xa9/0x250 [ 37.341603] device_release_driver_internal+0x4f7/0x7a0 [ 37.341990] driver_detach+0x1e8/0x2c0 [ 37.342272] bus_remove_driver+0x134/0x290 [ 37.342577] driver_unregister+0x77/0xa0 [ 37.342873] pci_unregister_driver+0x2c/0x1c0 [ 37.343196] cleanup_module+0x15/0x1c [savagefb] [ 37.343543] __se_sys_delete_module+0x398/0x490 [ 37.343881] __x64_sys_delete_module+0x56/0x60 [ 37.344221] do_syscall_64+0x4d/0xc0 [ 37.344492] entry_SYSCALL_64_after_hwframe+0x44/0xae Signed-off-by:
Zheyu Ma <zheyuma97@gmail.com> Signed-off-by:
-
- 09 Oct, 2021 9 commits
-
-
Sam Ravnborg authored
This reverts commit 230a6f0e ("dt-bindings: add bindings for the Sharp LS060T1SX01 panel") It was pushed to drm-misc-next by accident. Added my own ack to expedit the revert. Signed-off-by:
-
Sam Ravnborg authored
This reverts commit 223cce88 ("drm/panel: Add support for Sharp LS060T1SX01 panel"). It was pushed to drm-misc-next by accident. Added my own ack to expedit the revert. Signed-off-by:
-
Dmitry Baryshkov authored
Add driver to support Sharp LS06T1SX01 FullHD panel. The panel uses nt35695 driver IC. For example this LCD module can be found in the kwaek.ca Dragonboard Display Adapter Bundle. Signed-off-by:
-
Dmitry Baryshkov authored
Add devicetree bindings for the Sharp LS060T1SX01 6.0" FullHD panel using NT35695 driver. This panel can be found i.e. in the Dragonboard Display Adapter bundle. Signed-off-by:
-
David Heidelberg authored
Both hardware and driver can communicate DDC over i2c bus. Fixes warnings as: arch/arm/boot/dts/tegra20-paz00.dt.yaml: panel: 'ddc-i2c-bus' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: /home/runner/work/linux/linux/Documentation/devicetree/bindings/display/panel/panel-simple.yaml Signed-off-by:
David Heidelberg <david@ixit.cz> Acked-by:
-
Søren Andersen authored
Add support for the Logic Technologies LTTD800x480 L2RT 7" 800x480 TFT Resistive Touch Module. Signed-off-by:
Søren Andersen <san@skov.dk> Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by:
-
Oleksij Rempel authored
Add binding for the Innolux G070Y2-T02 panel. It is 7" WVGA (800x480) TFT LCD panel with TTL interface and a backlight unit. Signed-off-by:
-
Nikola Pavlica authored
This tablet display is unique and hence must be added to documentation. Unfortunately, it's real make and number is not known due to obscure and missing documentation and lack of writing on the display assembly itself. So the natural alternative that came to mind is to name the panel after the device that contained it (an Android tablet). Hopefully that isn't an issue. I can confirm that the parameters that I've obtained are correct since they came from a dump of the original Android OS. Signed-off-by:
Nikola Pavlica <pavlica.nikola@gmail.com> Signed-off-by:
-
Nikola Pavlica authored
Add vendor prefix for the Vivax brand by M SAN Grupa d.o.o. Source (in Croatian): https://www.vivax.com/hr/o-nama.aspxSigned-off-by:
-
- 08 Oct, 2021 2 commits
-
-
Philip Chen authored
dp-aux-bus.yaml says we can list an eDP panel as a child of an eDP controller node to represent the fact that the panel is connected to the controller's DP AUX bus. Let's add it to the ps8640 bindings. Signed-off-by:
Philip Chen <philipchen@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
-
Marek Vasut authored
Move detach implementation from sn65dsi83_remove() to dedicated .detach callback. There is no functional change to the code, but that detach is now in the correct location. Signed-off-by:
Robert Foss <robert.foss@linaro.org> Signed-off-by:
-
- 07 Oct, 2021 9 commits
-
-
Christian König authored
Simplifying the code a bit. v2: add missing rcu_read_lock()/unlock() v3: switch to locked version Signed-off-by:
-
Christian König authored
Simplifying the code a bit. v2: add missing rcu_read_lock()/rcu_read_unlock() v3: use dma_resv_for_each_fence instead Signed-off-by:
-
Christian König authored
Simplifying the code a bit. v2: use dma_resv_for_each_fence Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20211005113742.1101-17-christian.koenig@amd.com
-
Christian König authored
This is probably a fix since we didn't even grabed a reference to the fences. Signed-off-by:
-
Christian König authored
Simplify the code a bit. Signed-off-by:
-
Christian König authored
Simplifying the code a bit. Signed-off-by:
-
Christian König authored
A simpler version of the iterator to be used when the dma_resv object is locked. v2: fix index check here as well v3: minor coding improvement, some documentation cleanup Signed-off-by:
-
Simon Ser authored
The KMS documentation doesn't say much about the meaning of each content type. Add a reference to the specification defining them. Signed-off-by:
Simon Ser <contact@emersion.fr> Cc: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Pekka Paalanen <pekka.paalanen@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211004091236.82010-1-contact@emersion.fr
-
Alex Xu (Hello71) authored
drivers/gpu/drm/drm_plane_helper.c: In function 'drm_primary_helper_update': drivers/gpu/drm/drm_plane_helper.c:113:32: error: 'visible' is used uninitialized [-Werror=uninitialized] 113 | struct drm_plane_state plane_state = { | ^~~~~~~~~~~ drivers/gpu/drm/drm_plane_helper.c:178:14: note: 'visible' was declared here 178 | bool visible; | ^~~~~~~ cc1: all warnings being treated as errors visible is an output, not an input. in practice this use might turn out OK but it's still UB. Fixes: df86af91 ("drm/plane-helper: Add drm_plane_helper_check_state()") Reviewed-by:Alex Xu (Hello71) <alex_y_xu@yahoo.ca> Signed-off-by:
-
- 06 Oct, 2021 6 commits
-
-
Dmitry Baryshkov authored
- set DRM_CONNECTOR_POLL_HPD as the connector will generate hotplug events on its own - do not call drm_kms_helper_hotplug_event() unless mode_config.funcs pointer is not NULL to remove possible kernel oops. Fixes: bc6fa867 ("drm/bridge/lontium-lt9611uxc: move HPD notification out of IRQ handler") Signed-off-by:
-
Cai Huoqing authored
The helper function devm_add_action_or_reset() will internally call devm_add_action(), and if devm_add_action() fails then it will execute the action mentioned and return the error code. So use devm_add_action_or_reset() instead of devm_add_action() to simplify the error handling, reduce the code. Signed-off-by:
Cai Huoqing <caihuoqing@baidu.com> Reviewed-by:
-
Christian König authored
This makes the function much simpler since the complex retry logic is now handled elsewhere. Signed-off-by:
-
Christian König authored
This makes the function much simpler since the complex retry logic is now handled elsewhere. Signed-off-by:
-
Christian König authored
This makes the function much simpler since the complex retry logic is now handled elsewhere. v2: use sizeof(void*) instead v3: fix rebase bug Signed-off-by:
-
Christian König authored
This makes the function much simpler since the complex retry logic is now handled else where. Signed-off-by:
-
