There is no need to grab slots_lock if the vapic_page will not
be touched.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

Older linux guests (in this case, 2.6.9) can attempt to
access the performance counter MSRs without a fixup section, and injecting
a GPF kills the guest.  Work around by allowing the guest to write those MSRs.

Tested by me on RHEL-4 i386 and x86_64 guests, as well as F-9 guests.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

The function ept_update_paging_mode_cr0() write to
CPU_BASED_VM_EXEC_CONTROL based on vmcs_config.cpu_based_exec_ctrl. That's
wrong because the variable may not consistent with the content in the
CPU_BASE_VM_EXEC_CONTROL MSR.
Signed-off-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

Signed-off-by: Avi Kivity <avi@qumranet.com>

Signed-off-by: Avi Kivity <avi@qumranet.com>

Instead of prefetching all segment bases before emulation, read them at the
last moment.  Since most of them are unneeded, we save some cycles on
Intel machines where this is a bit expensive.
Signed-off-by: Avi Kivity <avi@qumranet.com>

Signed-off-by: Avi Kivity <avi@qumranet.com>

rip relative decoding is relative to the instruction pointer of the next
instruction; by moving address adjustment until after decoding is complete,
we remove the need to determine the instruction size.
Signed-off-by: Avi Kivity <avi@qumranet.com>

Consolidate the duplicated code when not in any special case.
Signed-off-by: Avi Kivity <avi@qumranet.com>

Instead of using sparse switches, use simpler if/else sequences.
Signed-off-by: Avi Kivity <avi@qumranet.com>

x86_64 does not decode rex.b in certain cases, where the r/m field = 5.
Signed-off-by: Avi Kivity <avi@qumranet.com>

Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

Emulation failure reports are useful, so allow more than one per the lifetime
of the module.
Signed-off-by: Avi Kivity <avi@qumranet.com>

Currently kvmtrace is not portable. This will prevent from copying a
trace file from big-endian target to little-endian workstation for analysis.
In the patch, kernel outputs metadata containing a magic number to trace
log, and changes 64-bit words to be u64 instead of a pair of u32s.
Signed-off-by: Tan Li <li.tan@intel.com>
Acked-by: Jerone Young <jyoung5@us.ibm.com>
Acked-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

If we're not gonna do anything (case in which failure is already
reported), we do not need to even bother with calculating the linear rip.
Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

Only abort guest entry if the timer count went from 0->1, since for 1->2
or larger the bit will either be set already or a timer irq will have
been injected.

Using atomic_inc_and_test() for it also introduces an SMP barrier
to the LAPIC version (thought it was unecessary because of timer
migration, but guest can be scheduled to a different pCPU between exit
and kvm_vcpu_block(), so there is the possibility for a race).

Noticed by Avi.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

This patch enables coalesced MMIO for ia64 architecture.
It defines KVM_MMIO_PAGE_OFFSET and KVM_CAP_COALESCED_MMIO.
It enables the compilation of coalesced_mmio.c.

[akpm: fix compile error on ia64]
Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Avi Kivity <avi@qumranet.com>

This patch enables coalesced MMIO for powerpc architecture.
It defines KVM_MMIO_PAGE_OFFSET and KVM_CAP_COALESCED_MMIO.
It enables the compilation of coalesced_mmio.c.
Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Avi Kivity <avi@qumranet.com>

This patch enables coalesced MMIO for x86 architecture.
It defines KVM_MMIO_PAGE_OFFSET and KVM_CAP_COALESCED_MMIO.
It enables the compilation of coalesced_mmio.c.
Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Avi Kivity <avi@qumranet.com>

This patch adds all needed structures to coalesce MMIOs.
Until an architecture uses it, it is not compiled.

Coalesced MMIO introduces two ioctl() to define where are the MMIO zones that
can be coalesced:

- KVM_REGISTER_COALESCED_MMIO registers a coalesced MMIO zone.
  It requests one parameter (struct kvm_coalesced_mmio_zone) which defines
  a memory area where MMIOs can be coalesced until the next switch to
  user space. The maximum number of MMIO zones is KVM_COALESCED_MMIO_ZONE_MAX.

- KVM_UNREGISTER_COALESCED_MMIO cancels all registered zones inside
  the given bounds (bounds are also given by struct kvm_coalesced_mmio_zone).

The userspace client can check kernel coalesced MMIO availability by asking
ioctl(KVM_CHECK_EXTENSION) for the KVM_CAP_COALESCED_MMIO capability.
The ioctl() call to KVM_CAP_COALESCED_MMIO will return 0 if not supported,
or the page offset where will be stored the ring buffer.
The page offset depends on the architecture.

After an ioctl(KVM_RUN), the first page of the KVM memory mapped points to
a kvm_run structure. The offset given by KVM_CAP_COALESCED_MMIO is
an offset to the coalesced MMIO ring expressed in PAGE_SIZE relatively
to the address of the start of th kvm_run structure. The MMIO ring buffer
is defined by the structure kvm_coalesced_mmio_ring.

[akio: fix oops during guest shutdown]
Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Akio Takebe <takebe_akio@jp.fujitsu.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

Modify member in_range() of structure kvm_io_device to pass length and the type
of the I/O (write or read).

This modification allows to use kvm_io_device with coalesced MMIO.
Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Avi Kivity <avi@qumranet.com>

SVM cannot benefit from page prefetching since guest page fault bypass
cannot by made to work there.  Avoid accessing the guest page table in
this case.
Signed-off-by: Avi Kivity <avi@qumranet.com>

In preparation for next patch. No code change.
Signed-off-by: Avi Kivity <avi@qumranet.com>

Encountered in FC6 boot sequence, now that we don't force ss.rpl = 0 during
the protected mode transition.  Not really necessary, but nice to have.
Signed-off-by: Avi Kivity <avi@qumranet.com>

Instead of fetching the data explicitly, use SrcImmByte.
Signed-off-by: Avi Kivity <avi@qumranet.com>

Instead of reading each pte individually, read 256 bytes worth of ptes and
batch process them.
Signed-off-by: Avi Kivity <avi@qumranet.com>

Add support for mov r, sreg (0x8c) instruction
Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net>
Signed-off-by: Laurent Vivier <laurent.vivier@bull.net>
Signed-off-by: Avi Kivity <avi@qumranet.com>

Add support for mov r, sreg (0x8c) instruction.

[avi: drop the sreg decoding table in favor of 1:1 encoding]
Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net>
Signed-off-by: Laurent Vivier <laurent.vivier@bull.net>
Signed-off-by: Avi Kivity <avi@qumranet.com>

Add support to mov r, imm (0xb8) instruction.
Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net>
Signed-off-by: Laurent Vivier <laurent.vivier@bull.net>
Signed-off-by: Avi Kivity <avi@qumranet.com>

Add support for jmp far (opcode 0xea) instruction.
Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net>
Signed-off-by: Laurent Vivier <laurent.vivier@bull.net>
Signed-off-by: Avi Kivity <avi@qumranet.com>

Update c->dst.bytes in decode instruction instead of instruction
itself.  It's needed because if c->dst.bytes is equal to 0, the
instruction is not emulated.
Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net>
Signed-off-by: Laurent Vivier <laurent.vivier@bull.net>
Signed-off-by: Avi Kivity <avi@qumranet.com>

Prefixes functions that will be exported with kvm_.
We also prefixed set_segment() even if it still static
to be coherent.
signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net>
Signed-off-by: Laurent Vivier <laurent.vivier@bull.net>
Signed-off-by: Avi Kivity <avi@qumranet.com>

Add emulation for the memory type range registers, needed by VMware esx 3.5,
and by pci device assignment.
Signed-off-by: Avi Kivity <avi@qumranet.com>

This can be used to simplify the x86 instruction decoder.
Signed-off-by: Avi Kivity <avi@qumranet.com>

Signed-off-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

[avi: fix ia64 build breakage]
Signed-off-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

Since we aren't modifying any register, there's no need to decache
the register state.
Signed-off-by: Avi Kivity <avi@qumranet.com>

Obsoleted by the vmx-specific per-cpu list.
Signed-off-by: Avi Kivity <avi@qumranet.com>

VMX hardware can cache the contents of a vcpu's vmcs.  This cache needs
to be flushed when migrating a vcpu to another cpu, or (which is the case
that interests us here) when disabling hardware virtualization on a cpu.

The current implementation of decaching iterates over the list of all vcpus,
picks the ones that are potentially cached on the cpu that is being offlined,
and flushes the cache.  The problem is that it uses mutex_trylock() to gain
exclusive access to the vcpu, which fires off a (benign) warning about using
the mutex in an interrupt context.

To avoid this, and to make things generally nicer, add a new per-cpu list
of potentially cached vcus.  This makes the decaching code much simpler.  The
list is vmx-specific since other hardware doesn't have this issue.

[andrea: fix crash on suspend/resume]
Signed-off-by: Andrea Arcangeli <andrea@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

KVM turns off hardware virtualization extensions during reboot, in order
to disassociate the memory used by the virtualization extensions from the
processor, and in order to have the system in a consistent state.
Unfortunately virtual machines may still be running while this goes on,
and once virtualization extensions are turned off, any virtulization
instruction will #UD on execution.

Fix by adding an exception handler to virtualization instructions; if we get
an exception during reboot, we simply spin waiting for the reset to complete.
If it's a true exception, BUG() so we can have our stack trace.
Signed-off-by: Avi Kivity <avi@qumranet.com>