- 17 May, 2017 7 commits
-
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: DCBX fixes. 2 bug fixes for the case where the NIC's firmware DCBX agent is enabled. With these fixes, we will return the proper information to lldpad. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Otherwise, all the host based DCBX settings from lldpad will fail if the firmware DCBX agent is running. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Michael Chan authored
In the current code, bnxt_dcb_init() is called too early before we determine if the firmware DCBX agent is running or not. As a result, we are not setting the DCB_CAP_DCBX_HOST and DCB_CAP_DCBX_LLD_MANAGED flags properly to report to DCBNL. Signed-off-by:
-
Eric Dumazet authored
If CONFIG_INET is not set, net/core/sock.c can not compile : net/core/sock.c: In function ‘skb_orphan_partial’: net/core/sock.c:1810:2: error: implicit declaration of function ‘skb_is_tcp_pure_ack’ [-Werror=implicit-function-declaration] if (skb_is_tcp_pure_ack(skb)) ^ Fix this by always including <net/tcp.h> Fixes: f6ba8d33 ("netem: fix skb_orphan_partial()") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Reported-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Craig Gallek authored
The KASAN warning repoted below was discovered with a syzkaller program. The reproducer is basically: int s = socket(AF_INET6, SOCK_RAW, NEXTHDR_HOP); send(s, &one_byte_of_data, 1, MSG_MORE); send(s, &more_than_mtu_bytes_data, 2000, 0); The socket() call sets the nexthdr field of the v6 header to NEXTHDR_HOP, the first send call primes the payload with a non zero byte of data, and the second send call triggers the fragmentation path. The fragmentation code tries to parse the header options in order to figure out where to insert the fragment option. Since nexthdr points to an invalid option, the calculation of the size of the network header can made to be much larger than the linear section of the skb and data is read outside of it. This fix makes ip6_find_1stfrag return an error if it detects running out-of-bounds. [ 42.361487] ================================================================== [ 42.364412] BUG: KASAN: slab-out-of-bounds in ip6_fragment+0x11c8/0x3730 [ 42.365471] Read of size 840 at addr ffff88000969e798 by task ip6_fragment-oo/3789 [ 42.366469] [ 42.366696] CPU: 1 PID: 3789 Comm: ip6_fragment-oo Not tainted 4.11.0+ #41 [ 42.367628] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.1-1ubuntu1 04/01/2014 [ 42.368824] Call Trace: [ 42.369183] dump_stack+0xb3/0x10b [ 42.369664] print_address_description+0x73/0x290 [ 42.370325] kasan_report+0x252/0x370 [ 42.370839] ? ip6_fragment+0x11c8/0x3730 [ 42.371396] check_memory_region+0x13c/0x1a0 [ 42.371978] memcpy+0x23/0x50 [ 42.372395] ip6_fragment+0x11c8/0x3730 [ 42.372920] ? nf_ct_expect_unregister_notifier+0x110/0x110 [ 42.373681] ? ip6_copy_metadata+0x7f0/0x7f0 [ 42.374263] ? ip6_forward+0x2e30/0x2e30 [ 42.374803] ip6_finish_output+0x584/0x990 [ 42.375350] ip6_output+0x1b7/0x690 [ 42.375836] ? ip6_finish_output+0x990/0x990 [ 42.376411] ? ip6_fragment+0x3730/0x3730 [ 42.376968] ip6_local_out+0x95/0x160 [ 42.377471] ip6_send_skb+0xa1/0x330 [ 42.377969] ip6_push_pending_frames+0xb3/0xe0 [ 42.378589] rawv6_sendmsg+0x2051/0x2db0 [ 42.379129] ? rawv6_bind+0x8b0/0x8b0 [ 42.379633] ? _copy_from_user+0x84/0xe0 [ 42.380193] ? debug_check_no_locks_freed+0x290/0x290 [ 42.380878] ? ___sys_sendmsg+0x162/0x930 [ 42.381427] ? rcu_read_lock_sched_held+0xa3/0x120 [ 42.382074] ? sock_has_perm+0x1f6/0x290 [ 42.382614] ? ___sys_sendmsg+0x167/0x930 [ 42.383173] ? lock_downgrade+0x660/0x660 [ 42.383727] inet_sendmsg+0x123/0x500 [ 42.384226] ? inet_sendmsg+0x123/0x500 [ 42.384748] ? inet_recvmsg+0x540/0x540 [ 42.385263] sock_sendmsg+0xca/0x110 [ 42.385758] SYSC_sendto+0x217/0x380 [ 42.386249] ? SYSC_connect+0x310/0x310 [ 42.386783] ? __might_fault+0x110/0x1d0 [ 42.387324] ? lock_downgrade+0x660/0x660 [ 42.387880] ? __fget_light+0xa1/0x1f0 [ 42.388403] ? __fdget+0x18/0x20 [ 42.388851] ? sock_common_setsockopt+0x95/0xd0 [ 42.389472] ? SyS_setsockopt+0x17f/0x260 [ 42.390021] ? entry_SYSCALL_64_fastpath+0x5/0xbe [ 42.390650] SyS_sendto+0x40/0x50 [ 42.391103] entry_SYSCALL_64_fastpath+0x1f/0xbe [ 42.391731] RIP: 0033:0x7fbbb711e383 [ 42.392217] RSP: 002b:00007ffff4d34f28 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 42.393235] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fbbb711e383 [ 42.394195] RDX: 0000000000001000 RSI: 00007ffff4d34f60 RDI: 0000000000000003 [ 42.395145] RBP: 0000000000000046 R08: 00007ffff4d34f40 R09: 0000000000000018 [ 42.396056] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000400aad [ 42.396598] R13: 0000000000000066 R14: 00007ffff4d34ee0 R15: 00007fbbb717af00 [ 42.397257] [ 42.397411] Allocated by task 3789: [ 42.397702] save_stack_trace+0x16/0x20 [ 42.398005] save_stack+0x46/0xd0 [ 42.398267] kasan_kmalloc+0xad/0xe0 [ 42.398548] kasan_slab_alloc+0x12/0x20 [ 42.398848] __kmalloc_node_track_caller+0xcb/0x380 [ 42.399224] __kmalloc_reserve.isra.32+0x41/0xe0 [ 42.399654] __alloc_skb+0xf8/0x580 [ 42.400003] sock_wmalloc+0xab/0xf0 [ 42.400346] __ip6_append_data.isra.41+0x2472/0x33d0 [ 42.400813] ip6_append_data+0x1a8/0x2f0 [ 42.401122] rawv6_sendmsg+0x11ee/0x2db0 [ 42.401505] inet_sendmsg+0x123/0x500 [ 42.401860] sock_sendmsg+0xca/0x110 [ 42.402209] ___sys_sendmsg+0x7cb/0x930 [ 42.402582] __sys_sendmsg+0xd9/0x190 [ 42.402941] SyS_sendmsg+0x2d/0x50 [ 42.403273] entry_SYSCALL_64_fastpath+0x1f/0xbe [ 42.403718] [ 42.403871] Freed by task 1794: [ 42.404146] save_stack_trace+0x16/0x20 [ 42.404515] save_stack+0x46/0xd0 [ 42.404827] kasan_slab_free+0x72/0xc0 [ 42.405167] kfree+0xe8/0x2b0 [ 42.405462] skb_free_head+0x74/0xb0 [ 42.405806] skb_release_data+0x30e/0x3a0 [ 42.406198] skb_release_all+0x4a/0x60 [ 42.406563] consume_skb+0x113/0x2e0 [ 42.406910] skb_free_datagram+0x1a/0xe0 [ 42.407288] netlink_recvmsg+0x60d/0xe40 [ 42.407667] sock_recvmsg+0xd7/0x110 [ 42.408022] ___sys_recvmsg+0x25c/0x580 [ 42.408395] __sys_recvmsg+0xd6/0x190 [ 42.408753] SyS_recvmsg+0x2d/0x50 [ 42.409086] entry_SYSCALL_64_fastpath+0x1f/0xbe [ 42.409513] [ 42.409665] The buggy address belongs to the object at ffff88000969e780 [ 42.409665] which belongs to the cache kmalloc-512 of size 512 [ 42.410846] The buggy address is located 24 bytes inside of [ 42.410846] 512-byte region [ffff88000969e780, ffff88000969e980) [ 42.411941] The buggy address belongs to the page: [ 42.412405] page:ffffea000025a780 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 [ 42.413298] flags: 0x100000000008100(slab|head) [ 42.413729] raw: 0100000000008100 0000000000000000 0000000000000000 00000001800c000c [ 42.414387] raw: ffffea00002a9500 0000000900000007 ffff88000c401280 0000000000000000 [ 42.415074] page dumped because: kasan: bad access detected [ 42.415604] [ 42.415757] Memory state around the buggy address: [ 42.416222] ffff88000969e880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 42.416904] ffff88000969e900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 42.417591] >ffff88000969e980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 42.418273] ^ [ 42.418588] ffff88000969ea00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 42.419273] ffff88000969ea80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 42.419882] ================================================================== Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Craig Gallek <kraig@google.com> Signed-off-by:
-
Ihar Hrachyshka authored
It's a common practice to send gratuitous ARPs after moving an IP address to another device to speed up healing of a service. To fulfill service availability constraints, the timing of network peers updating their caches to point to a new location of an IP address can be particularly important. Sometimes neigh_update calls won't touch neither lladdr nor state, for example if an update arrives in locktime interval. The neigh->updated value is tested by the protocol specific neigh code, which in turn will influence whether NEIGH_UPDATE_F_OVERRIDE gets set in the call to neigh_update() or not. As a result, we may effectively ignore the update request, bailing out of touching the neigh entry, except that we still bump its timestamps inside neigh_update. This may be a problem for updates arriving in quick succession. For example, consider the following scenario: A service is moved to another device with its IP address. The new device sends three gratuitous ARP requests into the network with ~1 seconds interval between them. Just before the first request arrives to one of network peer nodes, its neigh entry for the IP address transitions from STALE to DELAY. This transition, among other things, updates neigh->updated. Once the kernel receives the first gratuitous ARP, it ignores it because its arrival time is inside the locktime interval. The kernel still bumps neigh->updated. Then the second gratuitous ARP request arrives, and it's also ignored because it's still in the (new) locktime interval. Same happens for the third request. The node eventually heals itself (after delay_first_probe_time seconds since the initial transition to DELAY state), but it just wasted some time and require a new ARP request/reply round trip. This unfortunate behaviour both puts more load on the network, as well as reduces service availability. This patch changes neigh_update so that it bumps neigh->updated (as well as neigh->confirmed) only once we are sure that either lladdr or entry state will change). In the scenario described above, it means that the second gratuitous ARP request will actually update the entry lladdr. Ideally, we would update the neigh entry on the very first gratuitous ARP request. The locktime mechanism is designed to ignore ARP updates in a short timeframe after a previous ARP update was honoured by the kernel layer. This would require tracking timestamps for state transitions separately from timestamps when actual updates are received. This would probably involve changes in neighbour struct. Therefore, the patch doesn't tackle the issue of the first gratuitous APR ignored, leaving it for a follow-up. Signed-off-by:
Ihar Hrachyshka <ihrachys@redhat.com> Signed-off-by:
-
Ihar Hrachyshka authored
When arp_accept is 1, gratuitous ARPs are supposed to override matching entries irrespective of whether they arrive during locktime. This was implemented in commit 56022a8f ("ipv4: arp: update neighbour address when a gratuitous arp is received and arp_accept is set") There is a glitch in the patch though. RFC 2002, section 4.6, "ARP, Proxy ARP, and Gratuitous ARP", defines gratuitous ARPs so that they can be either of Request or Reply type. Those Reply gratuitous ARPs can be triggered with standard tooling, for example, arping -A option does just that. This patch fixes the glitch, making both Request and Reply flavours of gratuitous ARPs to behave identically. As per RFC, if gratuitous ARPs are of Reply type, their Target Hardware Address field should also be set to the link-layer address to which this cache entry should be updated. The field is present in ARP over Ethernet but not in IEEE 1394. In this patch, I don't consider any broadcasted ARP replies as gratuitous if the field is not present, to conform the standard. It's not clear whether there is such a thing for IEEE 1394 as a gratuitous ARP reply; until it's cleared up, we will ignore such broadcasts. Note that they will still update existing ARP cache entries, assuming they arrive out of locktime time interval. Signed-off-by:
-
- 16 May, 2017 6 commits
-
-
Arnd Bergmann authored
We now reference the arp_tbl, which requires IPv4 support to be enabled in the kernel, otherwise we get a link error: drivers/net/built-in.o: In function `mlx5e_tc_update_neigh_used_value': (.text+0x16afec): undefined reference to `arp_tbl' drivers/net/built-in.o: In function `mlx5e_rep_neigh_init': en_rep.c:(.text+0x16c16d): undefined reference to `arp_tbl' drivers/net/built-in.o: In function `mlx5e_rep_netevent_event': en_rep.c:(.text+0x16cbb5): undefined reference to `arp_tbl' This adds a Kconfig dependency for it. Fixes: 232c0013 ("net/mlx5e: Add support to neighbour update flow") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
David Ahern authored
In general, rtnetlink dumps do not anticipate failure to dump a single object (e.g., link or route) on a single pass. As both route and link objects have grown via more attributes, that is no longer a given. netlink dumps can handle a failure if the dump function returns an error; specifically, netlink_dump adds the return code to the response if it is <= 0 so userspace is notified of the failure. The missing piece is the rtnetlink dump functions returning the error. Fix route and link dump functions to return the errors if no object is added to an skb (detected by skb->len != 0). IPv6 route dumps (rt6_dump_route) already return the error; this patch updates IPv4 and link dumps. Other dump functions may need to be ajusted as well. Reported-by:
Jan Moskyto Matejka <mq@ucw.cz> Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Christoph Hellwig authored
The driver explicitly bypasses APIs to register all memory once a connection is made, and thus allows remote access to memory. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Acked-by:
Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by:
-
Ursula Braun authored
Currently, SMC enables remote access to physical memory when a user has successfully configured and established an SMC-connection until ten minutes after the last SMC connection is closed. Because this is considered a security risk, drivers are supposed to use IB_PD_UNSAFE_GLOBAL_RKEY in such a case. This patch changes the current SMC code to use IB_PD_UNSAFE_GLOBAL_RKEY. This improves user awareness, but does not remove the security risk itself. Signed-off-by:
-
Thomas Winter authored
The skb->dev that is passed into ip_mr_input is the loX device for VRFs. When we lookup a vif for this dev, none is found as we do not create vifs for loopbacks. Instead lookup a vif for the actual device that the packet was received on, eg the vlan. Signed-off-by:
Thomas Winter <Thomas.Winter@alliedtelesis.co.nz> cc: David Ahern <dsa@cumulusnetworks.com> cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> cc: roopa <roopa@cumulusnetworks.com> Acked-by:
-
Soheil Hassas Yeganeh authored
tcp_ack() can call tcp_fragment() which may dededuct the value tp->fackets_out when MSS changes. When prior_fackets is larger than tp->fackets_out, tcp_clean_rtx_queue() can invoke tcp_update_reordering() with negative values. This results in absurd tp->reodering values higher than sysctl_tcp_max_reordering. Note that tcp_update_reordering indeeds sets tp->reordering to min(sysctl_tcp_max_reordering, metric), but because the comparison is signed, a negative metric always wins. Fixes: c7caf8d3 ("[TCP]: Fix reord detection due to snd_una covered holes") Reported-by:
Rebecca Isaacs <risaacs@google.com> Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
- 15 May, 2017 14 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Track alignment in BPF verifier so that legitimate programs won't be rejected on !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS architectures. 2) Make tail calls work properly in arm64 BPF JIT, from Deniel Borkmann. 3) Make the configuration and semantics Generic XDP make more sense and don't allow both generic XDP and a driver specific instance to be active at the same time. Also from Daniel. 4) Don't crash on resume in xen-netfront, from Vitaly Kuznetsov. 5) Fix use-after-free in VRF driver, from Gao Feng. 6) Use netdev_alloc_skb_ip_align() to avoid unaligned IP headers in qca_spi driver, from Stefan Wahren. 7) Always run cleanup routines in BPF samples when we get SIGTERM, from Andy Gospodarek. 8) The mdio phy code should bring PHYs out of reset using the shared GPIO lines before invoking bus->reset(). From Florian Fainelli. 9) Some USB descriptor access endian fixes in various drivers from Johan Hovold. 10) Handle PAUSE advertisements properly in mlx5 driver, from Gal Pressman. 11) Fix reversed test in mlx5e_setup_tc(), from Saeed Mahameed. 12) Cure netdev leak in AF_PACKET when using timestamping via control messages. From Douglas Caetano dos Santos. 13) netcp doesn't support HWTSTAMP_FILTER_ALl, reject it. From Miroslav Lichvar. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits) ldmvsw: stop the clean timer at beginning of remove ldmvsw: unregistering netdev before disable hardware net: netcp: fix check of requested timestamping filter ipv6: avoid dad-failures for addresses with NODAD qed: Fix uninitialized data in aRFS infrastructure mdio: mux: fix device_node_continue.cocci warnings net/packet: fix missing net_device reference release net/mlx4_core: Use min3 to select number of MSI-X vectors macvlan: Fix performance issues with vlan tagged packets net: stmmac: use correct pointer when printing normal descriptor ring net/mlx5: Use underlay QPN from the root name space net/mlx5e: IPoIB, Only support regular RQ for now net/mlx5e: Fix setup TC ndo net/mlx5e: Fix ethtool pause support and advertise reporting net/mlx5e: Use the correct pause values for ethtool advertising vmxnet3: ensure that adapter is in proper state during force_close sfc: revert changes to NIC revision numbers net: ch9200: add missing USB-descriptor endianness conversions net: irda: irda-usb: fix firmware name on big-endian hosts net: dsa: mv88e6xxx: add default case to switch ... -
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "A set of minor cifs fixes" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: [CIFS] Minor cleanup of xattr query function fs: cifs: transport: Use time_after for time comparison SMB2: Fix share type handling cifs: cifsacl: Use a temporary ops variable to reduce code length Don't delay freeing mids when blocked on slow socket write of request CIFS: silence lockdep splat in cifs_relock_file()
-
David S. Miller authored
Shannon Nelson says: ==================== ldmvsw: port removal stability Under heavy reboot stress testing we found a couple of timing issues when removing the device that could cause the kernel great heartburn, addressed by these two patches. ==================== Signed-off-by: -
Shannon Nelson authored
Stop the clean timer earlier to be sure there's no asynchronous interference while stopping the port. Orabug: 25748241 Signed-off-by:
Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by:
-
Thomas Tai authored
When running LDom binding/unbinding test, kernel may panic in ldmvsw_open(). It is more likely that because we're removing the ldc connection before unregistering the netdev in vsw_port_remove(), we set up a window of time where one process could be removing the device while another trying to UP the device. This also sometimes causes vio handshake error due to opening a device without closing it completely. We should unregister the netdev before we disable the "hardware". Orabug: 25980913, 25925306 Signed-off-by:
Thomas Tai <thomas.tai@oracle.com> Signed-off-by:
-
Miroslav Lichvar authored
The driver doesn't support timestamping of all received packets and should return error when trying to enable the HWTSTAMP_FILTER_ALL filter. Cc: WingMan Kwok <w-kwok2@ti.com> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by:
Miroslav Lichvar <mlichvar@redhat.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2017-05-12 This series contains some mlx5 fixes for net. Please pull and let me know if there's any problem. For -stable: ("net/mlx5e: Fix ethtool pause support and advertise reporting") kernels >= 4.8 ("net/mlx5e: Use the correct pause values for ethtool advertising") kernels >= 4.8 v1->v2: Dropped statistics spinlock patch, it needs some extra work. ==================== Signed-off-by: -
Mahesh Bandewar authored
Every address gets added with TENTATIVE flag even for the addresses with IFA_F_NODAD flag and dad-work is scheduled for them. During this DAD process we realize it's an address with NODAD and complete the process without sending any probe. However the TENTATIVE flags stays on the address for sometime enough to cause misinterpretation when we receive a NS. While processing NS, if the address has TENTATIVE flag, we mark it DADFAILED and endup with an address that was originally configured as NODAD with DADFAILED. We can't avoid scheduling dad_work for addresses with NODAD but we can avoid adding TENTATIVE flag to avoid this racy situation. Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Acked-by:
-
Mintz, Yuval authored
Current memset is using incorrect type of variable, causing the upper-half of the strucutre to be left uninitialized and causing: ethernet/qlogic/qed/qed_init_fw_funcs.c: In function 'qed_set_rfs_mode_disable': ethernet/qlogic/qed/qed_init_fw_funcs.c:993:3: error: '*((void *)&ramline+4)' is used uninitialized in this function [-Werror=uninitialized] Fixes: d51e4af5 ("qed: aRFS infrastructure support") Reported-by:
Yuval Mintz <Yuval.Mintz@cavium.com> Reviewed-by:
-
Julia Lawall authored
Device node iterators put the previous value of the index variable, so an explicit put causes a double put. In particular, of_mdiobus_register can fail before doing anything interesting, so one could view it as a no-op from the reference count point of view. Generated by: scripts/coccinelle/iterators/device_node_continue.cocci CC: Jon Mason <jon.mason@broadcom.com> Signed-off-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Douglas Caetano dos Santos authored
When using a TX ring buffer, if an error occurs processing a control message (e.g. invalid message), the net_device reference is not released. Fixes c14ac945 ("sock: enable timestamping using control messages") Signed-off-by:
Douglas Caetano dos Santos <douglascs@taghos.com.br> Acked-by:
-
yuval.shaia@oracle.com authored
Signed-off-by:
Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Vlad Yasevich authored
Macvlan always turns on offload features that have sofware fallback (NETIF_GSO_SOFTWARE). This allows much higher guest-guest communications over macvtap. However, macvtap does not turn on these features for vlan tagged traffic. As a result, depending on the HW that mactap is configured on, the performance of guest-guest communication over a vlan is very inconsistent. If the HW supports TSO/UFO over vlans, then the performance will be fine. If not, the the performance will suffer greatly since the VM may continue using TSO/UFO, and will force the host segment the traffic and possibly overlow the macvtap queue. This patch adds the always on offloads to vlan_features. This makes sure that any vlan tagged traffic between 2 guest will not be segmented needlessly. Signed-off-by:
Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by:
-
Niklas Cassel authored
There are two pointers in sysfs_display_ring, one that increments if using normal dma descriptors, another if using extended dma descriptors. When printing the normal dma descriptors, the wrong pointer is used, thus the printed descriptor addresses are incorrect. Signed-off-by:
Niklas Cassel <niklas.cassel@axis.com> Signed-off-by:
-
- 14 May, 2017 5 commits
-
-
Yishai Hadas authored
Root flow table is dynamically changed by the underlying flow steering layer, and IPoIB/ULPs have no idea what will be the root flow table in the future, hence we need a dynamic infrastructure to move Underlay QPs with the root flow table. Fixes: b3ba5149 ("net/mlx5: Refactor create flow table method to accept underlay QP") Signed-off-by:
Erez Shitrit <erezsh@mellanox.com> Signed-off-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Saeed Mahameed authored
IPoIB doesn't support striding RQ at the moment, for this we need to explicitly choose non striding RQ in IPoIB init, even if the HW supports it. Fixes: 8f493ffd ("net/mlx5e: IPoIB, RX steering RSS RQTs and TIRs") Signed-off-by:
-
Saeed Mahameed authored
Fail-safe support patches introduced a trivial bug, setup tc callback is doing a wrong check of the netdevice state, the fix is simply to invert the condition. Fixes: 6f9485af ("net/mlx5e: Fail safe tc setup") Signed-off-by:
-
Gal Pressman authored
Pause bit should set when RX pause is on, not TX pause. Also, setting Asym_Pause is incorrect, and should be turned off. Fixes: 665bc539 ("net/mlx5e: Use new ethtool get/set link ksettings API") Signed-off-by:
Gal Pressman <galp@mellanox.com> Cc: kernel-team@fb.com Signed-off-by:
-
Gal Pressman authored
Query the operational pause from firmware (PFCC register) instead of always passing zeros. Fixes: 665bc539 ("net/mlx5e: Use new ethtool get/set link ksettings API") Signed-off-by:
-
- 13 May, 2017 8 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull some more input subsystem updates from Dmitry Torokhov: "An updated xpad driver with a few more recognized device IDs, and a new psxpad-spi driver, allowing connecting Playstation 1 and 2 joypads via SPI bus" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: cros_ec_keyb - remove extraneous 'const' Input: add support for PlayStation 1/2 joypads connected via SPI Input: xpad - add USB IDs for Mad Catz Brawlstick and Razer Sabertooth Input: xpad - sync supported devices with xboxdrv Input: xpad - sort supported devices by USB ID
-
git://git.infradead.org/linux-ubifsLinus Torvalds authored
Pull UBI/UBIFS updates from Richard Weinberger: - new config option CONFIG_UBIFS_FS_SECURITY - minor improvements - random fixes * tag 'upstream-4.12-rc1' of git://git.infradead.org/linux-ubifs: ubi: Add debugfs file for tracking PEB state ubifs: Fix a typo in comment of ioctl2ubifs & ubifs2ioctl ubifs: Remove unnecessary assignment ubifs: Fix cut and paste error on sb type comparisons ubi: fastmap: Fix slab corruption ubifs: Add CONFIG_UBIFS_FS_SECURITY to disable/enable security labels ubi: Make mtd parameter readable ubi: Fix section mismatch
-
git://git.kernel.org/pub/scm/linux/kernel/git/rw/umlLinus Torvalds authored
Pull UML fixes from Richard Weinberger: "No new stuff, just fixes" * 'for-linus-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Add missing NR_CPUS include um: Fix to call read_initrd after init_bootmem um: Include kbuild.h instead of duplicating its macros um: Fix PTRACE_POKEUSER on x86_64 um: Set number of CPUs um: Fix _print_addr()
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "15 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm, docs: update memory.stat description with workingset* entries mm: vmscan: scan until it finds eligible pages mm, thp: copying user pages must schedule on collapse dax: fix PMD data corruption when fault races with write dax: fix data corruption when fault races with write ext4: return to starting transaction in ext4_dax_huge_fault() mm: fix data corruption due to stale mmap reads dax: prevent invalidation of mapped DAX entries Tigran has moved mm, vmalloc: fix vmalloc users tracking properly mm/khugepaged: add missed tracepoint for collapse_huge_page_swapin gcov: support GCC 7.1 mm, vmstat: Remove spurious WARN() during zoneinfo print time: delete current_fs_time() hwpoison, memcg: forcibly uncharge LRU pages
-
Steve French authored
Some minor cleanup of cifs query xattr functions (will also make SMB3 xattr implementation cleaner as well). Signed-off-by:Steve French <steve.french@primarydata.com>
-
Karim Eshapa authored
Use time_after kernel macro for time comparison that has safety check. Signed-off-by:
Karim Eshapa <karim.eshapa@gmail.com> Signed-off-by:
Steve French <smfrench@gmail.com>
-
Christophe JAILLET authored
In fs/cifs/smb2pdu.h, we have: #define SMB2_SHARE_TYPE_DISK 0x01 #define SMB2_SHARE_TYPE_PIPE 0x02 #define SMB2_SHARE_TYPE_PRINT 0x03 Knowing that, with the current code, the SMB2_SHARE_TYPE_PRINT case can never trigger and printer share would be interpreted as disk share. So, test the ShareType value for equality instead. Fixes: faaf946a ("CIFS: Add tree connect/disconnect capability for SMB2") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by:
Aurelien Aptel <aaptel@suse.com> Signed-off-by:
-
