The current SOF machine driver adds a name prefix for each codec,
mainly to differentiate ALSA controls for left and right amplifiers.

This is a good idea, but the machine driver duplicates some of the
information that already exists in ACPI descriptors, so add those
prefixes there. Follow-up patches will make use of the information
encoded in these tables and remove duplication.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200923080514.3242858-4-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

cppcheck reports the following warning:

sound/soc/intel/boards/sof_sdw.c:866:46: style: Clarify calculation
precedence for '&' and '?'. [clarifyCalculation]
 hdmi_num = sof_sdw_quirk & SOF_SDW_TGL_HDMI ?
                                             ^

There's no reason to use the ternary operator here, we might as well
use a regular if-else construct.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200923080514.3242858-3-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

When SND_SOC_CROS_EC_CODEC is enabled and CRYPTO is disabled, it results
in the following Kbuild warning:

WARNING: unmet direct dependencies detected for CRYPTO_LIB_SHA256
  Depends on [n]: CRYPTO [=n]
  Selected by [y]:
  - SND_SOC_CROS_EC_CODEC [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && CROS_EC [=y]

The reason is that SND_SOC_CROS_EC_CODEC selects CRYPTO_LIB_SHA256 without
depending on or selecting CRYPTO while CRYPTO_LIB_SHA256 is subordinate to
CRYPTO.

Honor the kconfig menu hierarchy to remove kconfig dependency warnings.

Fixes: 93fa0af4 ("ASoC: cros_ec_codec: switch to library API for SHA-256")
Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Link: https://lore.kernel.org/r/20200917141803.92889-1-fazilyildiran@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Remove duplicate code for programming the I/V sense the call to update
the register was duplicated in commit 09ed395b ("ASoC: tas2562:
Add voltage sense slot configuration").

Fixes: 09ed395b ("ASoC: tas2562: Add voltage sense slot configuration")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200922142411.10364-1-dmurphy@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use set_jack ops to set jack so machine drivers do not need to include
hdmi-codec.h explicitly.
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200922062316.1172935-1-cychiang@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series "ASoC: SOF: fix kcontrol size checks" from Kai Vehmanen <kai.vehmanen@linux.intel.com>:

Series that fixes checks for 'size' in kcontrol get/put ext_bytes methods
for SOF. The gaps in these checks were discovered via cppcheck warnings
on unused variable values.

Pierre-Louis Bossart (5):
  ASoC: SOF: control: fix size checks for ext_bytes control .get()
  ASoC: SOF: control: fix size checks for volatile ext_bytes control
    .get()
  ASoC: SOF: control: add size checks for ext_bytes control .put()
  ASoC: SOF: control: remove const in sizeof()
  ASoC: SOF: topology: remove const in sizeof()

 sound/soc/sof/control.c  | 53 +++++++++++++++++++++++++++++++---------
 sound/soc/sof/topology.c |  2 +-
 2 files changed, 43 insertions(+), 12 deletions(-)

--
2.27.0

To provide backward compatibility to older systems, the SOF HDA driver
allows user to specify which HDMI codec driver to use at runtime via
kernel parameter. This mechanism has a subtle flaw in that it assumes
the codec drivers not to be loaded when the SOF PCI driver is loaded.

The problem is rooted in use of the hdev->type field.
snd_hdac_ext_bus_device_init() initializes this field to HDA_DEV_ASOC.
This signals the HDA core that ASoC drivers should be considered in
driver matching (hda_bus_match()). The SOF and SST drivers continue by
overriding this field to HDA_DEV_LEGACY and proceeding to load driver
modules with request_module(). Correct drivers will get loaded and
attached.

If however the codec drivers are already loaded when
snd_hdac_ext_bus_device_init() is called, the matching will not work as
expected as device type is still set to HDA_DEV_ASOC. Specifically if
hdac-hdmi is attached when machine driver is configured to use hdac-hda,
this leads to out-of-bounds memory access in
hda_dsp_hdmi_build_controls().

Fix the issue by adding codec type as a parameter to
snd_hdac_ext_bus_device_init() and ensuring type is set correctly from
the start.

Fixes: 139c7feb ("ASoC: SOF: Intel: add support for snd-hda-codec-hdmi")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200921100841.2882662-1-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Refactor the tas2770_set_samplerate to simplify the code and access the
I2C bus only once per rate request. The ramp rate and sample rate bits
are contained in the same register so a single call to the
snd_soc_update_bits function is all that is needed
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200918190548.12598-9-dmurphy@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

Fix up the spacing for argument alignment and add new lines to separate
code. Eliminate unneccessary goto statements when the error code could
just be returned.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200918190548.12598-8-dmurphy@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

Update the hardcoded masks with the GENMASK macro. Also update some of
the hardcoded bits with the BIT macro
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200918190548.12598-6-dmurphy@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

Fix the unbalanced call to the pm_runtime_disable when removing the
module.  pm_runtime_enable is not called nor is the pm_runtime setup in
the code.  Remove the i2c_remove function and the pm_runtime_disable.

Fixes: 1a476abc ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200918190548.12598-5-dmurphy@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

The I2C addresses listed in the yaml are not correct. The addresses can
range from 0x41 through 0x48 based on register configurations. Fix the
example and the description.

Fixes: 4b7151da ("dt-bindings: ASoC: Add tas2770 smart PA dt bindings")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200918190548.12598-3-dmurphy@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add the TAS2110 amplifier to the TAS2562 driver. The TAS2110 is register
and bitmap compatible. The chips differ in that the TAS2110 does not
have the I/V Sense feedback path. Since these features do not exist the
device needs to be registered without these controls.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200921153820.18357-2-dmurphy@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add the TAS2110 amplifier compatible.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200921153820.18357-1-dmurphy@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

Make sure the TLV header and size are consistent before copying from
userspace.

Fixes: c3078f53 ('ASoC: SOF: Add Sound Open Firmware KControl support')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200921110814.2910477-4-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Mirror addition of checks for regular ext_bytes controls.

Fixes: 783560d0 ('ASoC: SOF: Implement snd_sof_bytes_ext_volatile_get kcontrol IO')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200921110814.2910477-3-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

cppcheck complains twice:

sound/soc/sof/control.c:436:2: style: Assignment of function parameter
has no effect outside the function. [uselessAssignmentArg]
 size -= sizeof(const struct snd_ctl_tlv);
 ^

sound/soc/sof/control.c:436:7: style: Variable 'size' is assigned a
value that is never used. [unreadVariable]
 size -= sizeof(const struct snd_ctl_tlv);

Somehow we dropped the checks for the size argument when upstreaming
the code, somewhere between v5 and v6.

Re-add a size check to avoid providing userspace with more data that
it asked for.

Also fix all error codes, we should return -ENOSPC instead of -EINVAL.

Fixes: c3078f53 ('ASoC: SOF: Add Sound Open Firmware KControl support')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200921110814.2910477-2-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

At power-up the analog circuits may take up to one full second before
being charged with the default configuration. Using the analog blocks
before they are ready generates a *very* crappy sound.

Enable the fast charge feature, which will require a bit more power
than normal charge but will definitely speed up the starting operation
by shrinking this delay to up to 40 ms.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20200911173140.29984-4-miquel.raynal@bootlin.comSigned-off-by: Mark Brown <broonie@kernel.org>

Current code expects a single channel to be always used. Fix this
situation by forwarding the number of channels used. Then fix the
derivation of the bdiv clock rate.

Fixes: 96c3bb00 ("ASoC: tlv320aic32x4: Dynamically Determine Clocking")
Suggested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20200911173140.29984-3-miquel.raynal@bootlin.comSigned-off-by: Mark Brown <broonie@kernel.org>

As indicated in the datasheet, a 10ms delay must be observed after
programming the divisors.

The lack of delay prevents the codec to work properly and the playback
appears extremely slow and totally un-audible on a custom sama5 based
board.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20200911173140.29984-2-miquel.raynal@bootlin.comSigned-off-by: Mark Brown <broonie@kernel.org>

To avoid the IO error, we need to cancel the delayed work and wait for it to finish.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200921094308.31921-1-shumingf@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

snd_soc_update_bits returns a 1 when the bit was successfully updated,
returns a 0 is no update was needed and a negative if the call failed.
The code is currently failing the case of a successful update by just
checking for a non-zero number. Modify these checks and return the error
code only if there is a negative.

Fixes: 1a476abc ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200918190548.12598-7-dmurphy@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

The devicetree binding indicates that the ti,asi-format, ti,imon-slot-no
and ti,vmon-slot-no are not required but the driver requires them or it
fails to probe. Honor the binding and allow these entries to be optional
and set the corresponding values to the default values for each as defined
in the data sheet.

Fixes: 1a476abc ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200918190548.12598-4-dmurphy@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add the BIAS_STANDBY and BIAS_PREPARE to the set_bias_level or else the
driver will return -EINVAL which is not correct as they are valid
states.

Fixes: 1a476abc ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200918190548.12598-2-dmurphy@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

tas2770_reset is called during i2c probe. The reset calls the
snd_soc_component_write which depends on the tas2770->component being
available. The component pointer is not set until codec_probe so move
the reset to the codec_probe after the pointer is set.

Fixes: 1a476abc ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200918190548.12598-1-dmurphy@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

To avoid the IO error, we need to cancel the delayed work and wait for it to finish.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200921094244.31869-1-shumingf@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add the TAS2564 as a supported amplifier.  This amplifier is register,
bitmap and feature compatible to the TAS2562.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200918150130.21015-2-dmurphy@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add the TAS2564 compatible and data sheet link to the binding.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200918150130.21015-1-dmurphy@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

Fix build warning:
WARNING: modpost: missing MODULE_LICENSE() in sound/soc/sof/imx/imx-common.o

Fixes: 18ebffe4 ("ASoC: SOF: imx: Add debug support for imx platforms")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200921104746.2903507-1-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

On i.MX platforms PM is not managed via ACPI although CONFIG_ACPI
can be set. So, in order to correctly set the system target state
we introduce a flag for platforms that require to use acpi target
states.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200921105038.2909899-1-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add volume controls for:
- Analog programmable gain amplifier (PGA) (-3 .. +12 dB)
- ADC attenuator (0 .. -96 dB)
Signed-off-by: Guillermo Rodríguez <guille.rodriguez@gmail.com>
Acked-by: David Rhodes <David.rhodes@cirrus.com>
Link: https://lore.kernel.org/r/20200918134317.22574-1-guille.rodriguez@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

In commit 783898ce ("ASoC: SOF: append extended data to
sof_ipc_comp_process") the process components are set to run on the
fixed core 0, this break us from scheduling components on any other DSP
core.

Since we can get the DSP core index from swidget->core, it is duplicated
to pass the extra 'core' argument for those sof_widget_load_xx()
functions.

Here removes the duplicate 'core' argument and get component core from
swidget->core directly to fix the issue mentioned above.

Fixes: 783898ce ("ASoC: SOF: append extended data to sof_ipc_comp_process")
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200921104544.2897112-1-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add support to configure the GPIO pin to the specific configuration.
The GPIO pin can be configured as GPO, IRQ, SDOUT2, PDMCLK, MICBASE_EN,
GPI, MCLK, SDIN, PDMDIN1, PDMDIN2, PDMDIN3 or PDMDIN4 and the output
drive can be configured with various configuration.
Signed-off-by: Camel Guo <camelg@axis.com>
Link: https://lore.kernel.org/r/20200918114025.18205-2-camel.guo@axis.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add properties for configuring the General Purpose Input Output (GPIO).
There are 2 settings for GPIO, configuration and the output drive type.
Signed-off-by: Camel Guo <camelg@axis.com>
Acked-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200918114025.18205-1-camel.guo@axis.comSigned-off-by: Mark Brown <broonie@kernel.org>

As sai ip is upgraded, so update sai register list.

Shengjiu Wang (3):
  ASoC: fsl_sai: Add new added registers and new bit definition
  ASoC: fsl_sai: Add fsl_sai_check_version function
  ASoC: fsl_sai: Set MCLK input or output direction

changes in v2:
- update commit message for first commit
- Add acked-by Nicolin

 sound/soc/fsl/fsl_sai.c | 77 ++++++++++++++++++++++++++++++++++++
 sound/soc/fsl/fsl_sai.h | 87 +++++++++++++++++++++++++++++++++++++++++
 2 files changed, 164 insertions(+)

--
2.27.0

Series that adds debug support for IMX platforms, more details to
FW version information, adds missing -EACCESS handling to
pm_runtime_get_sync() calls and a set of minor cosmetic, trace
verbosity and coding style issues.

Guennadi Liakhovetski (3):
  ASoC: SOF: (cosmetic) remove redundant "ret" variable uses
  ASoC: SOF: remove several superfluous type-casts
  ASoC: SOF: fix range checks

Iulian Olaru (1):
  ASoC: SOF: imx: Add debug support for imx platforms

Karol Trzcinski (1):
  ASoC: SOF: Add `src_hash` to `sof_ipc_fw_version` structure

Pierre-Louis Bossart (3):
  ASoC: SOF: debug: update test for pm_runtime_get_sync()
  ASoC: SOF: control: update test for pm_runtime_get_sync()
  ASoC: SOF: Intel: hda: reduce verbosity of boot error logs

 include/sound/sof/info.h         |  4 +-
 sound/soc/sof/control.c          | 62 +++++++++++++--------------
 sound/soc/sof/debug.c            |  2 +-
 sound/soc/sof/imx/Kconfig        |  8 ++++
 sound/soc/sof/imx/Makefile       |  3 ++
 sound/soc/sof/imx/imx-common.c   | 72 ++++++++++++++++++++++++++++++++
 sound/soc/sof/imx/imx-common.h   | 16 +++++++
 sound/soc/sof/imx/imx8.c         | 23 +++++++++-
 sound/soc/sof/imx/imx8m.c        | 17 +++++++-
 sound/soc/sof/intel/hda-loader.c | 16 +++----
 sound/soc/sof/intel/hda.c        | 12 ++++--
 sound/soc/sof/intel/hda.h        |  2 +
 sound/soc/sof/sof-audio.c        |  6 +--
 sound/soc/sof/sof-priv.h         |  8 ++++
 sound/soc/sof/topology.c         | 44 ++++++++++---------
 15 files changed, 226 insertions(+), 69 deletions(-)
 create mode 100644 sound/soc/sof/imx/imx-common.c
 create mode 100644 sound/soc/sof/imx/imx-common.h

--
2.27.0

Merge series "ASoC: q6afe: add clocks support" from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>:

q6afe already exposes clocks using apis, but not as proper
clock controller driver. This patch puts those clocks
in to a proper clock controller so that other drivers that
depend on those clocks can be properly expressed.

Srinivas Kandagatla (2):
  ASoC: q6afe: dt-bindings: add q6afe clock bindings
  ASoC: q6afe-clocks: add q6afe clock controller

 .../devicetree/bindings/sound/qcom,q6afe.txt  |  23 ++
 include/dt-bindings/sound/qcom,q6afe.h        |  74 ++++-
 sound/soc/qcom/Kconfig                        |   4 +
 sound/soc/qcom/qdsp6/Makefile                 |   1 +
 sound/soc/qcom/qdsp6/q6afe-clocks.c           | 270 ++++++++++++++++++
 5 files changed, 371 insertions(+), 1 deletion(-)
 create mode 100644 sound/soc/qcom/qdsp6/q6afe-clocks.c

--
2.21.0

Ak4458 can't support DSD512 format, but ak4497 can, so add
a new enum variable (enum ak4458_type) in ak4458_drvdata to
distinguish these two platforms.

Ak4497 has two kinds of DSD input pin, it can be selected by
the dsd-path property from DT.

In hw_params(), bit clock is calculated according to different
DSD format (DSD64, DSD128, DSD256, DSD512), then registers
are configured.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1600178220-28973-2-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add "dsd-path" property, which is used for ak4497 codec
to select the DSD input pin.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1600178220-28973-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>