- 08 Jun, 2023 15 commits
-
-
David Howells authored
Convert AF_ALG to use iov_iter_extract_pages() instead of iov_iter_get_pages(). This will pin pages or leave them unaltered rather than getting a ref on them as appropriate to the iterator. The pages need to be pinned for DIO-read rather than having refs taken on them to prevent VM copy-on-write from malfunctioning during a concurrent fork() (the result of the I/O would otherwise end up only visible to the child process and not the parent). Signed-off-by:
David Howells <dhowells@redhat.com> cc: Herbert Xu <herbert@gondor.apana.org.au> cc: "David S. Miller" <davem@davemloft.net> cc: Eric Dumazet <edumazet@google.com> cc: Jakub Kicinski <kuba@kernel.org> cc: Paolo Abeni <pabeni@redhat.com> cc: Jens Axboe <axboe@kernel.dk> cc: Matthew Wilcox <willy@infradead.org> cc: linux-crypto@vger.kernel.org cc: netdev@vger.kernel.org Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
David Howells authored
Move netfs_extract_iter_to_sg() to lib/scatterlist.c as it's going to be used by more than just network filesystems (AF_ALG, for example). Signed-off-by:
-
David Howells authored
Wrap a line at 80 to stop checkpatch complaining. Signed-off-by:
-
David Howells authored
Fix a couple of spelling mistakes in a comment. Suggested-by:
Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/ZHH2mSRqeL4Gs1ft@corigine.com/ Link: https://lore.kernel.org/r/ZHH1nqZWOGzxlidT@corigine.com/Signed-off-by:
-
David Howells authored
Rename netfs_extract_iter_to_sg() and its auxiliary functions to drop the netfs_ prefix. Signed-off-by:
-
Paolo Abeni authored
Jiawen Wu says: ==================== TXGBE PHYLINK support Implement I2C, SFP, GPIO and PHYLINK to setup TXGBE link. Because our I2C and PCS are based on Synopsys Designware IP-core, extend the i2c-designware and pcs-xpcs driver to realize our functions. ==================== Link: https://lore.kernel.org/r/20230606092107.764621-1-jiawenwu@trustnetic.comSigned-off-by:
-
Jiawen Wu authored
Add phylink support to Wangxun 10Gb Ethernet controller for the 10GBASE-R interface. Signed-off-by:
Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by:
-
Jiawen Wu authored
Register MDIO bus for PCS layer to use Synopsys designware XPCS, support 10GBASE-R interface to the controller. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
-
Jiawen Wu authored
Add basic support for XPCS using 10GBASE-R interface. This mode will be extended to use interrupt, so set pcs.poll false. And avoid soft reset so that the device using this mode is in the default configuration. Signed-off-by:
-
Jiawen Wu authored
Register GPIO chip and handle GPIO IRQ for SFP socket. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
-
Jiawen Wu authored
Register SFP platform device to get modules information. Signed-off-by:
Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by:
-
Jiawen Wu authored
Register the platform device to use Designware I2C bus master driver. Use regmap to read/write I2C device region from given base offset. Signed-off-by:
-
Jiawen Wu authored
In order for I2C to be able to work in standard mode, register a fixed rate clock for each I2C device. Signed-off-by:
-
Jiawen Wu authored
Register software nodes for GPIO, I2C, SFP and PHYLINK. Define the device properties. Signed-off-by:
-
Michal Smulski authored
Enable USXGMII mode for mv88e6393x chips. Tested on Marvell 88E6191X. Signed-off-by:
Michal Smulski <michal.smulski@ooma.com> Link: https://lore.kernel.org/r/20230605174442.12493-1-msmulski2@gmail.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- 07 Jun, 2023 25 commits
-
-
Jakub Kicinski authored
Maxime Chevallier says: ==================== Followup fixes for the dwmac and altera lynx conversion Here's yet another version of the cleanup series for the TSE PCS replacement by PCS Lynx. It includes Kconfig fixups, some missing initialisations and a slight rework suggested by Russell for the dwmac cleanup sequence, along with more explicit zeroing of local structures as per MAciej's review. ==================== Link: https://lore.kernel.org/r/20230607135941.407054-1-maxime.chevallier@bootlin.comSigned-off-by:
-
Maxime Chevallier authored
Explicitly zero-ize the local mdio_regmap_config data, and explicitly set the .autoscan parameter, as we only have a PCS on this bus. Fixes: 5d1f3fe7 ("net: stmmac: dwmac-sogfpga: use the lynx pcs driver") Suggested-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Suggested-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by:
-
Maxime Chevallier authored
Set the .autoscan flag to false on the regmap-mdio bus, to avoid using a random uninitialized value. We don't want autoscan in this case as the mdio device is a PCS and not a PHY. Fixes: db48abba ("net: ethernet: altera-tse: Convert to mdio-regmap and use PCS Lynx") Suggested-by:
-
Maxime Chevallier authored
So far, only the dwmac_socfpga variant of stmmac uses PCS Lynx. Use a dedicated cleanup sequence for dwmac_socfpga instead of using the generic stmmac one. Fixes: 5d1f3fe7 ("net: stmmac: dwmac-sogfpga: use the lynx pcs driver") Suggested-by:
-
Maxime Chevallier authored
Use the correct Kconfig dependency for altera_tse as PCS_ALTERA_TSE was replaced by PCS_LYNX. Fixes: db48abba ("net: ethernet: altera-tse: Convert to mdio-regmap and use PCS Lynx") Signed-off-by:
-
Maxime Chevallier authored
The regmap_config and mdio_regmap_config objects needs to be zeroed before using them. This will cause spurious errors at probe time as config->pad_bits is containing random uninitialized data. Fixes: db48abba ("net: ethernet: altera-tse: Convert to mdio-regmap and use PCS Lynx") Signed-off-by:
-
Jakub Kicinski authored
Jakub Kicinski says: ==================== tools: ynl: generate code for the handshake family Add necessary features and generate user space C code for serializing / deserializing messages of the handshake family. In addition to basics already present in netdev and fou, handshake has nested attrs and multi-attr u32. ==================== Link: https://lore.kernel.org/r/20230606194302.919343-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Generate support for the handshake family. Signed-off-by: -
Jakub Kicinski authored
When parsing multi-attr we count the objects and then allocate an array to hold the parsed objects. If an attr space has multiple multi-attr objects, however, if parsing the first array fails we'll leave the object count for the second even tho the second array was never allocated. This may cause crashes when freeing objects on error. Count attributes to a variable on the stack and only set the count in the object once the memory was allocated. Signed-off-by: -
Jakub Kicinski authored
The handshake family needs support for MultiAttr scalars. Right now we only support code gen for MultiAttr nested types. Signed-off-by: -
Simon Horman authored
txgbe_shutdown() relies on txgbe_dev_shutdown() to initialise wake by passing it by reference. However, txgbe_dev_shutdown() doesn't use this parameter at all. wake is then passed uninitialised by txgbe_dev_shutdown() to pci_wake_from_d3(). Resolve this problem by: * Removing the unused parameter from txgbe_dev_shutdown() * Removing the uninitialised variable wake from txgbe_dev_shutdown() * Passing false to pci_wake_from_d3() - this assumes that although uninitialised wake was in practice false (0). I'm not sure that this counts as a bug, as I'm not sure that it manifests in any unwanted behaviour. But in any case, the issue was introduced by: 3ce7547e ("net: txgbe: Add build support for txgbe") Flagged by Smatch as: .../txgbe_main.c:486 txgbe_shutdown() error: uninitialized symbol 'wake'. No functional change intended. Compile tested only. Signed-off-by:
Simon Horman <horms@kernel.org> Reviewed-by:
David S. Miller <davem@davemloft.net>
-
Atin Bainada authored
Pointer variables of (void*) type do not require type cast. Signed-off-by:
Atin Bainada <hi@atinb.me> Signed-off-by:
-
Masahiro Yamada authored
With CONFIG_LIQUIDIO=m and CONFIG_LIQUIDIO_VF=y (or vice versa), $(common-objs) are linked to a module and also to vmlinux even though the expected CFLAGS are different between builtins and modules. This is the same situation as fixed by commit 637a642f ("zstd: Fixing mixed module-builtin objects"). Introduce the new module, liquidio-core, to provide the common functions to liquidio and liquidio-vf. Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Reviewed-by:
-
David Morley authored
Fix incorrectly formatted tcp_syn_linear_timeouts sysctl in the ipv4_net_table. Fixes: ccce324d ("tcp: make the first N SYN RTO backoffs linear") Signed-off-by:
David Morley <morleyd@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Tested-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Dan Carpenter authored
This error path needs call mutex_unlock(&ocelot->tas_lock) before returning. Fixes: 2d800bc5 ("net/sched: taprio: replace tc_taprio_qopt_offload :: enable with a "cmd" enum") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
David S. Miller authored
Detlev Casanova says: ==================== net: phy: realtek: Support external PHY clock Some PHYs can use an external clock that must be enabled before communicating with them. Changes since v3: * Do not call genphy_suspend if WoL is enabled. Changes since v2: * Reword documentation commit message Changes since v1: * Remove the clock name as it is not guaranteed to be identical across different PHYs * Disable/Enable the clock when suspending/resuming ==================== Signed-off-by: -
Detlev Casanova authored
For PHYs that call rtl821x_probe() where an external clock can be configured, make sure that the clock is disabled when ->suspend() is called and enabled on resume. The PHY_ALWAYS_CALL_SUSPEND is added to ensure that the suspend function is actually always called. Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by:
Detlev Casanova <detlev.casanova@collabora.com> Signed-off-by:
-
Detlev Casanova authored
Ethern PHYs can have external an clock that needs to be activated before communicating with the PHY. Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Detlev Casanova authored
In some cases, the PHY can use an external clock source instead of a crystal. Add an optional clock in the phy node to make sure that the clock source is enabled, if specified, before probing. Reviewed-by:
-
Shradha Gupta authored
Allocate the size of rx indirection table dynamically in netvsc from the value of size provided by OID_GEN_RECEIVE_SCALE_CAPABILITIES query instead of using a constant value of ITAB_NUM. Signed-off-by:
Shradha Gupta <shradhagupta@linux.microsoft.com> Reviewed-by:
Haiyang Zhang <haiyangz@microsoft.com> Tested-on: Ubuntu22 (azure VM, SKU size: Standard_F72s_v2) Testcases: 1. ethtool -x eth0 output 2. LISA testcase:PERF-NETWORK-TCP-THROUGHPUT-MULTICONNECTION-NTTTCP-Synthetic 3. LISA testcase:PERF-NETWORK-TCP-THROUGHPUT-MULTICONNECTION-NTTTCP-SRIOV Reviewed-by:
-
Xin Long authored
Replace these open-code bearer rcu_dereference access with bearer_get(), like other places in bearer.c. While at it, also use tipc_net() instead of net_generic(net, tipc_net_id) to get "tn" in bearer.c. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Reviewed-by:
Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by:
Tung Nguyen <tung.q.nguyen@dektech.com.au> Link: https://lore.kernel.org/r/1072588a8691f970bda950c7e2834d1f2983f58e.1685976044.git.lucien.xin@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Guillaume Nault says: ==================== ipv4: Remove RT_CONN_FLAGS() calls in flowi4_init_output(). Remove a few RT_CONN_FLAGS() calls used inside flowi4_init_output(). These users can be easily converted to set the scope properly, instead of overloading the tos parameter with scope information as done by RT_CONN_FLAGS(). The objective is to eventually remove RT_CONN_FLAGS() entirely, which will then allow to also remove RTO_ONLINK and to finally convert ->flowi4_tos to dscp_t. ==================== Link: https://lore.kernel.org/r/cover.1685999117.git.gnault@redhat.comSigned-off-by:
-
Guillaume Nault authored
RT_CONN_FLAGS(sk) overloads flowi4_tos with the RTO_ONLINK bit when sk has the SOCK_LOCALROUTE flag set. This allows ip_route_output_key_hash() to eventually adjust flowi4_scope. Instead of relying on special handling of the RTO_ONLINK bit, we can just set the route scope correctly. This will eventually allow to avoid special interpretation of tos variables and to convert ->flowi4_tos to dscp_t. Signed-off-by:
Guillaume Nault <gnault@redhat.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Guillaume Nault authored
RT_CONN_FLAGS(sk) overloads the tos parameter with the RTO_ONLINK bit when sk has the SOCK_LOCALROUTE flag set. This is only useful for ip_route_output_key_hash() to eventually adjust the route scope. Let's drop RTO_ONLINK and set the correct scope directly to avoid this special case in the future and to allow converting ->flowi4_tos to dscp_t. Signed-off-by:
-
Jakub Kicinski authored
Robert Hancock says: ==================== Move KSZ9477 errata handling to PHY driver Patches to move handling for KSZ9477 PHY errata register fixes from the DSA switch driver into the corresponding PHY driver, for more proper layering and ordering. ==================== Link: https://lore.kernel.org/r/20230605153943.1060444-1-robert.hancock@calian.comSigned-off-by:
-
