Common realloc mistake: 'file_append' nulled but not freed upon failure

Link: https://lkml.kernel.org/r/20230426010527.703093-1-zenghao@kylinos.cnSigned-off-by: Hao Zeng <zenghao@kylinos.cn>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

When event enablement changes, user_events attempts to update a bit in
the user process. If a fault is hit, an attempt to fault-in the page and
the write is retried if the page made it in. While this normally requires
a couple attempts, it is possible a bad user process could attempt to
cause infinite loops.

Ensure fault-in attempts either sync or async are limited to a max of 10
attempts for each update. When the max is hit, return -EFAULT so another
attempt is not made in all cases.

Link: https://lkml.kernel.org/r/20230425225107.8525-5-beaub@linux.microsoft.comSuggested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

User processes register an address and bit pair for events. If the same
address and bit pair are registered multiple times in the same process,
it can cause undefined behavior when events are enabled/disabled.
When more than one are used, the bit could be turned off by another
event being disabled, while the original event is still enabled.

Prevent undefined behavior by checking the current mm to see if any
event has already been registered for the address and bit pair. Return
EADDRINUSE back to the user process if it's already being used.

Update ftrace self-test to ensure this occurs properly.

Link: https://lkml.kernel.org/r/20230425225107.8525-4-beaub@linux.microsoft.comSuggested-by: Doug Cook <dcook@linux.microsoft.com>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

If an event is enabled and a user process unregisters user_events, the
bit is left set. Fix this by always clearing the bit in the user process
if unregister is successful.

Update abi self-test to ensure this occurs properly.

Link: https://lkml.kernel.org/r/20230425225107.8525-3-beaub@linux.microsoft.comSuggested-by: Doug Cook <dcook@linux.microsoft.com>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The write index indicates which event the data is for and accesses a
per-file array. The index is passed by user processes during write()
calls as the first 4 bytes. Ensure that it cannot be negative by
returning -EINVAL to prevent out of bounds accesses.

Update ftrace self-test to ensure this occurs properly.

Link: https://lkml.kernel.org/r/20230425225107.8525-2-beaub@linux.microsoft.com

Fixes: 7f5a08c7 ("user_events: Add minimal support for trace_event into ftrace")
Reported-by: Doug Cook <dcook@linux.microsoft.com>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Sometimes we use seq_buf to format a string buffer, which
we then pass to printk(). However, in certain situations
the seq_buf string buffer can get too big, exceeding the
PRINTKRB_RECORD_MAX bytes limit, and causing printk() to
truncate the string.

Add a new seq_buf helper. This helper prints the seq_buf
string buffer line by line, using \n as a delimiter,
rather than passing the whole string buffer to printk()
at once.

Link: https://lkml.kernel.org/r/20230415100110.1419872-1-senozhatsky@chromium.org

Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Both print_fields() and print_array() do not handle if dynamic data ends
at the last byte of the payload for both __dyn_loc and __rel_loc field
types. For __rel_loc, the offset was off by 4 bytes, leading to
incorrect strings and data being printed out. In print_array() the
buffer pos was missed from being advanced, which results in the first
payload byte being used as the offset base instead of the field offset.

Advance __rel_loc offset by 4 to ensure correct offset and advance pos
to the field offset to ensure correct data is displayed when printing
arrays. Change >= to > when checking if data is in-bounds, since it's
valid for dynamic data to include the last byte of the payload.

Example outputs for event format:
        field:unsigned short common_type;       offset:0;       size:2; signed:0;
        field:unsigned char common_flags;       offset:2;       size:1; signed:0;
        field:unsigned char common_preempt_count;       offset:3;       size:1; signed:0;
        field:int common_pid;   offset:4;       size:4; signed:1;

        field:__rel_loc char text[];  offset:8;      size:4; signed:1;

Output before:
tp_rel_loc: text=<OVERFLOW>

Output after:
tp_rel_loc: text=Test

Link: https://lkml.kernel.org/r/20230419214140.4158-3-beaub@linux.microsoft.com

Fixes: 80a76994 ("tracing: Add "fields" option to show raw trace event fields")
Reported-by: Doug Cook <dcook@linux.microsoft.com>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Users expect that events can be filtered by the kernel. User events
currently sets all event fields as FILTER_OTHER which limits to binary
filters only. When strings are being used, functionality is reduced.

Use filter_assign_type() to find the most appropriate filter
type for each field in user events to ensure full kernel capabilities.

Link: https://lkml.kernel.org/r/20230419214140.4158-2-beaub@linux.microsoft.comSigned-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

In error case, 'buffer_page' returned by rb_set_head_page() is NULL,
currently check '&buffer_page->list' is equivalent to check 'buffer_page'
due to 'list' is the first member of 'buffer_page', but suppose it is not
some time, 'head_page' would be wild memory while check would be bypassed.

Link: https://lore.kernel.org/linux-trace-kernel/20230414071729.57312-1-zhengyejian1@huawei.com

Cc: <mhiramat@kernel.org>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The user events was added a bit prematurely, and there were a few kernel
developers that had issues with it. The API also needed a bit of work to
make sure it would be stable. It was decided to make user events "broken"
until this was settled. Now it has a new API that appears to be as stable
as it will be without the use of a crystal ball. It's being used within
Microsoft as is, which means the API has had some testing in real world
use cases. It went through many discussions in the bi-weekly tracing
meetings, and there's been no more comments about updates.

I feel this is good to go.

Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Currently, user events are shown using the "hex" output for "safety"
reasons as one cannot trust user events behaving nicely. But the hex
output is not the only utility for safe outputting of trace events. The
print_event_fields() is just as safe and gives user readable output.

Before:
         example-839     [001] .....    43.222244:
00000000: b1 06 00 00 47 03 00 00 00 00 00 00              ....G.......
         example-839     [001] .....    43.564433:
00000000: b1 06 00 00 47 03 00 00 01 00 00 00              ....G.......
         example-839     [001] .....    43.763917:
00000000: b1 06 00 00 47 03 00 00 02 00 00 00              ....G.......
         example-839     [001] .....    43.967929:
00000000: b1 06 00 00 47 03 00 00 03 00 00 00              ....G.......

After:

         example-837     [006] .....    55.739249: test: count=0x0 (0)
         example-837     [006] .....   111.104784: test: count=0x1 (1)
         example-837     [006] .....   111.268444: test: count=0x2 (2)
         example-837     [006] .....   111.416533: test: count=0x3 (3)
         example-837     [006] .....   111.542859: test: count=0x4 (4)

Link: https://lore.kernel.org/linux-trace-kernel/20230328151413.4770b8d7@gandalf.local.home

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Add tabs to make struct members easier to read and unify the style of
the code.

Link: https://lkml.kernel.org/r/20230328235219.203-13-beaub@linux.microsoft.comSigned-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Operators want to be able to ensure enough tracepoints exist on the
system for kernel components as well as for user components. Since there
are only up to 64K events, by default allow up to half to be used by
user events.

Add a kernel sysctl parameter (kernel.user_events_max) to set a global
limit that is honored among all groups on the system. This ensures hard
limits can be setup to prevent user processes from consuming all event
IDs on the system.

Link: https://lkml.kernel.org/r/20230328235219.203-12-beaub@linux.microsoft.comSigned-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Operators need a way to limit how much memory cgroups use. User events need
to be included into that accounting. Fix this by using GFP_KERNEL_ACCOUNT
for allocations generated by user programs for user_event tracing.

Link: https://lkml.kernel.org/r/20230328235219.203-11-beaub@linux.microsoft.comSigned-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The ABI for user_events has changed from mmap() based to remote writes.
Update the documentation to reflect these changes, add new section for
unregistering events since lifetime is now tied to tasks instead of
files.

Link: https://lkml.kernel.org/r/20230328235219.203-10-beaub@linux.microsoft.comSigned-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The ABI has changed to use a remote write approach. Update the example
to show the expected use of this new ABI. Also remove debugfs
path and use tracefs to ensure example works in more environments.

Link: https://lkml.kernel.org/r/20230328235219.203-9-beaub@linux.microsoft.comSigned-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Add ABI specific self-test to ensure enablements work in various
scenarios such as fork, VM_CLONE, and basic event enable/disable.
Ensure ABI contracts/limits are also being upheld, such as bit limits
and data size limits.

Link: https://lkml.kernel.org/r/20230328235219.203-8-beaub@linux.microsoft.comSigned-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

ABI has been changed to remote writes, update existing test cases to use
this new ABI to ensure existing functionality continues to work.

Link: https://lkml.kernel.org/r/20230328235219.203-7-beaub@linux.microsoft.comSigned-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Enablements are now tracked by the lifetime of the task/mm. User
processes need to be able to disable their addresses if tracing is
requested to be turned off. Before unmapping the page would suffice.
However, we now need a stronger contract. Add an ioctl to enable this.

A new flag bit is added, freeing, to user_event_enabler to ensure that
if the event is attempted to be removed while a fault is being handled
that the remove is delayed until after the fault is reattempted.

Link: https://lkml.kernel.org/r/20230328235219.203-6-beaub@linux.microsoft.comSigned-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

When events are enabled within the various tracing facilities, such as
ftrace/perf, the event_mutex is held. As events are enabled pages are
accessed. We do not want page faults to occur under this lock. Instead
queue the fault to a workqueue to be handled in a process context safe
way without the lock.

The enable address is marked faulting while the async fault-in occurs.
This ensures that we don't attempt to fault-in more than is necessary.
Once the page has been faulted in, an address write is re-attempted.
If the page couldn't fault-in, then we wait until the next time the
event is enabled to prevent any potential infinite loops.

Link: https://lkml.kernel.org/r/20230328235219.203-5-beaub@linux.microsoft.comSigned-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

As part of the discussions for user_events aligned with user space
tracers, it was determined that user programs should register a aligned
value to set or clear a bit when an event becomes enabled. Currently a
shared page is being used that requires mmap(). Remove the shared page
implementation and move to a user registered address implementation.

In this new model during the event registration from user programs 3 new
values are specified. The first is the address to update when the event
is either enabled or disabled. The second is the bit to set/clear to
reflect the event being enabled. The third is the size of the value at
the specified address.

This allows for a local 32/64-bit value in user programs to support
both kernel and user tracers. As an example, setting bit 31 for kernel
tracers when the event becomes enabled allows for user tracers to use
the other bits for ref counts or other flags. The kernel side updates
the bit atomically, user programs need to also update these values
atomically.

User provided addresses must be aligned on a natural boundary, this
allows for single page checking and prevents odd behaviors such as a
enable value straddling 2 pages instead of a single page. Currently
page faults are only logged, future patches will handle these.

Link: https://lkml.kernel.org/r/20230328235219.203-4-beaub@linux.microsoft.comSuggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

During tracefs discussions it was decided instead of requiring a mapping
within a user-process to track the lifetime of memory descriptors we
should hook the appropriate calls. Do this by adding the minimal stubs
required for task fork, exec, and exit. Currently this is just a NOP.
Future patches will implement these calls fully.

Link: https://lkml.kernel.org/r/20230328235219.203-3-beaub@linux.microsoft.comSuggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The UAPI parts need to be split out from the kernel parts of user_events
now that other parts of the kernel will reference it. Do so by moving
the existing include/linux/user_events.h into
include/uapi/linux/user_events.h.

Link: https://lkml.kernel.org/r/20230328235219.203-2-beaub@linux.microsoft.comSigned-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The hex, raw and bin formats come from the old PREEMPT_RT patch set
latency tracer. That actually gave real alternatives to reading the ascii
buffer. But they have started to bit rot and they do not give a good
representation of the tracing data.

Add "fields" option that will read the trace event fields and parse the
data from how the fields are defined:

With "fields" = 0 (default)

 echo 1 > events/sched/sched_switch/enable
 cat trace
         <idle>-0       [003] d..2.   540.078653: sched_switch: prev_comm=swapper/3 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=kworker/3:1 next_pid=83 next_prio=120
     kworker/3:1-83      [003] d..2.   540.078860: sched_switch: prev_comm=kworker/3:1 prev_pid=83 prev_prio=120 prev_state=I ==> next_comm=swapper/3 next_pid=0 next_prio=120
          <idle>-0       [003] d..2.   540.206423: sched_switch: prev_comm=swapper/3 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=sshd next_pid=807 next_prio=120
            sshd-807     [003] d..2.   540.206531: sched_switch: prev_comm=sshd prev_pid=807 prev_prio=120 prev_state=S ==> next_comm=swapper/3 next_pid=0 next_prio=120
          <idle>-0       [001] d..2.   540.206597: sched_switch: prev_comm=swapper/1 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=kworker/u16:4 next_pid=58 next_prio=120
   kworker/u16:4-58      [001] d..2.   540.206617: sched_switch: prev_comm=kworker/u16:4 prev_pid=58 prev_prio=120 prev_state=I ==> next_comm=bash next_pid=830 next_prio=120
            bash-830     [001] d..2.   540.206678: sched_switch: prev_comm=bash prev_pid=830 prev_prio=120 prev_state=R ==> next_comm=kworker/u16:4 next_pid=58 next_prio=120
   kworker/u16:4-58      [001] d..2.   540.206696: sched_switch: prev_comm=kworker/u16:4 prev_pid=58 prev_prio=120 prev_state=I ==> next_comm=bash next_pid=830 next_prio=120
            bash-830     [001] d..2.   540.206713: sched_switch: prev_comm=bash prev_pid=830 prev_prio=120 prev_state=R ==> next_comm=kworker/u16:4 next_pid=58 next_prio=120

 echo 1 > options/fields
           <...>-998     [002] d..2.   538.643732: sched_switch: next_prio=0x78 (120) next_pid=0x0 (0) next_comm=swapper/2 prev_state=0x20 (32) prev_prio=0x78 (120) prev_pid=0x3e6 (998) prev_comm=trace-cmd
          <idle>-0       [001] d..2.   538.643806: sched_switch: next_prio=0x78 (120) next_pid=0x33e (830) next_comm=bash prev_state=0x0 (0) prev_prio=0x78 (120) prev_pid=0x0 (0) prev_comm=swapper/1
            bash-830     [001] d..2.   538.644106: sched_switch: next_prio=0x78 (120) next_pid=0x3a (58) next_comm=kworker/u16:4 prev_state=0x0 (0) prev_prio=0x78 (120) prev_pid=0x33e (830) prev_comm=bash
   kworker/u16:4-58      [001] d..2.   538.644130: sched_switch: next_prio=0x78 (120) next_pid=0x33e (830) next_comm=bash prev_state=0x80 (128) prev_prio=0x78 (120) prev_pid=0x3a (58) prev_comm=kworker/u16:4
            bash-830     [001] d..2.   538.644180: sched_switch: next_prio=0x78 (120) next_pid=0x3a (58) next_comm=kworker/u16:4 prev_state=0x0 (0) prev_prio=0x78 (120) prev_pid=0x33e (830) prev_comm=bash
   kworker/u16:4-58      [001] d..2.   538.644185: sched_switch: next_prio=0x78 (120) next_pid=0x33e (830) next_comm=bash prev_state=0x80 (128) prev_prio=0x78 (120) prev_pid=0x3a (58) prev_comm=kworker/u16:4
            bash-830     [001] d..2.   538.644204: sched_switch: next_prio=0x78 (120) next_pid=0x0 (0) next_comm=swapper/1 prev_state=0x1 (1) prev_prio=0x78 (120) prev_pid=0x33e (830) prev_comm=bash
          <idle>-0       [003] d..2.   538.644211: sched_switch: next_prio=0x78 (120) next_pid=0x327 (807) next_comm=sshd prev_state=0x0 (0) prev_prio=0x78 (120) prev_pid=0x0 (0) prev_comm=swapper/3
            sshd-807     [003] d..2.   538.644340: sched_switch: next_prio=0x78 (120) next_pid=0x0 (0) next_comm=swapper/3 prev_state=0x1 (1) prev_prio=0x78 (120) prev_pid=0x327 (807) prev_comm=sshd

It traces the data safely without using the trace print formatting.

Link: https://lore.kernel.org/linux-trace-kernel/20230328145156.497651be@gandalf.local.home

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The canonical location for the tracefs filesystem is at /sys/kernel/tracing.

But, from Documentation/trace/ftrace.rst:

  Before 4.1, all ftrace tracing control files were within the debugfs
  file system, which is typically located at /sys/kernel/debug/tracing.
  For backward compatibility, when mounting the debugfs file system,
  the tracefs file system will be automatically mounted at:

  /sys/kernel/debug/tracing

A comment in kvm_stat still refers to this older debugfs path, so let's
update it to avoid confusion.

Link: https://lkml.kernel.org/r/20230313211746.1541525-3-zwisler@kernel.org

Cc: "Tobin C. Harding" <me@tobin.cc>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tycho Andersen <tycho@tycho.pizza>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The canonical location for the tracefs filesystem is at /sys/kernel/tracing.

But, from Documentation/trace/ftrace.rst:

  Before 4.1, all ftrace tracing control files were within the debugfs
  file system, which is typically located at /sys/kernel/debug/tracing.
  For backward compatibility, when mounting the debugfs file system,
  the tracefs file system will be automatically mounted at:

  /sys/kernel/debug/tracing

scripts/leaking_addresses.pl only skipped this older debugfs path, so
let's add the canonical path as well.

Link: https://lkml.kernel.org/r/20230313211746.1541525-2-zwisler@kernel.org

Cc: "Tobin C. Harding" <me@tobin.cc>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Acked-by: Tycho Andersen <tycho@tycho.pizza>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The canonical location for the tracefs filesystem is at /sys/kernel/tracing.

But, from Documentation/trace/ftrace.rst:

  Before 4.1, all ftrace tracing control files were within the debugfs
  file system, which is typically located at /sys/kernel/debug/tracing.
  For backward compatibility, when mounting the debugfs file system,
  the tracefs file system will be automatically mounted at:

  /sys/kernel/debug/tracing

A few spots in tools/testing/selftests still refer to this older debugfs
path, so let's update them to avoid confusion.

Link: https://lkml.kernel.org/r/20230313211746.1541525-1-zwisler@kernel.org

Cc: "Tobin C. Harding" <me@tobin.cc>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tycho Andersen <tycho@tycho.pizza>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Update fprobe.rst for
 - the private entry_data argument
 - the return value of the entry handler
 - the nr_rethook_node field.

Link: https://lkml.kernel.org/r/167526701579.433354.3057889264263546659.stgit@mhiramat.roam.corp.google.com

Cc: Florent Revest <revest@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Add a testcase for skipping exit_handler if entry_handler
returns !0.

Link: https://lkml.kernel.org/r/167526700658.433354.12922388040490848613.stgit@mhiramat.roam.corp.google.com

Cc: Florent Revest <revest@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Skip hooking function return and calling exit_handler if the
entry_handler() returns !0.

Link: https://lkml.kernel.org/r/167526699798.433354.10998365726830117303.stgit@mhiramat.roam.corp.google.com

Cc: Florent Revest <revest@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Add a test case for nr_maxactive. If the number of active
functions is more than nr_maxactive, it must be skipped.

Link: https://lkml.kernel.org/r/167526698856.433354.4430007340787176666.stgit@mhiramat.roam.corp.google.com

Cc: Florent Revest <revest@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Add nr_maxactive to specify rethook_node pool size. This means
the maximum number of actively running target functions concurrently
for probing by exit_handler. Note that if the running function is
preempted or sleep, it is still counted as 'active'.

Link: https://lkml.kernel.org/r/167526697917.433354.17779774988245113106.stgit@mhiramat.roam.corp.google.com

Cc: Florent Revest <revest@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Add test cases for checking whether private entry_data is
correctly passed or not.

Link: https://lkml.kernel.org/r/167526697074.433354.17790288501657876219.stgit@mhiramat.roam.corp.google.com

Cc: Florent Revest <revest@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Pass the private entry_data to the entry and exit handlers so that
they can share the context data, something like saved function
arguments etc.
User must specify the private entry_data size by @entry_data_size
field before registering the fprobe.

Link: https://lkml.kernel.org/r/167526696173.433354.17408372048319432574.stgit@mhiramat.roam.corp.google.com

Cc: Florent Revest <revest@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

When debugging a crash that appears to be related to ftrace, but not for
sure, it is useful to know if a function was ever enabled by ftrace or
not. It could be that a BPF program was attached to it, or possibly a live
patch.

We are having crashes in the field where this information is not always
known. But having ftrace set a flag if a function has ever been attached
since boot up helps tremendously in trying to know if a crash had to do
with something using ftrace.

For analyzing crashes, the use of a kdump image can have access to the
flags. When looking at issues where the kernel did not panic, the
touched_functions file can simply be used.

Link: https://lore.kernel.org/linux-trace-kernel/20230124095653.6fd1640e@gandalf.local.home

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Chris Li <chriscli@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Use try_cmpxchg instead of cmpxchg (*ptr, old, new) == old.
x86 CMPXCHG instruction returns success in ZF flag, so this change
saves a compare after cmpxchg (and related move instruction in
front of cmpxchg).

Also, try_cmpxchg implicitly assigns old *ptr value to "old" when cmpxchg
fails. There is no need to re-read the value in the loop.

No functional change intended.

Link: https://lkml.kernel.org/r/20230305155532.5549-4-ubizjak@gmail.com

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Acked-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The return values of some functions are of boolean type. Change the
type of these function to bool and adjust their return values. Also
change type of some internal varibles to bool.

No functional change intended.

Link: https://lkml.kernel.org/r/20230305155532.5549-3-ubizjak@gmail.com

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The results of some static functions are not used. Change the
type of these function to void and remove unnecessary returns.

No functional change intended.

Link: https://lkml.kernel.org/r/20230305155532.5549-2-ubizjak@gmail.comSigned-off-by: Uros Bizjak <ubizjak@gmail.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The ftrace selftest code has a trace_direct_tramp() function which it
uses as a direct call trampoline. This happens to work on x86, since the
direct call's return address is in the usual place, and can be returned
to via a RET, but in general the calling convention for direct calls is
different from regular function calls, and requires a trampoline written
in assembly.

On s390, regular function calls place the return address in %r14, and an
ftrace patch-site in an instrumented function places the trampoline's
return address (which is within the instrumented function) in %r0,
preserving the original %r14 value in-place. As a regular C function
will return to the address in %r14, using a C function as the trampoline
results in the trampoline returning to the caller of the instrumented
function, skipping the body of the instrumented function.

Note that the s390 issue is not detcted by the ftrace selftest code, as
the instrumented function is trivial, and returning back into the caller
happens to be equivalent.

On arm64, regular function calls place the return address in x30, and
an ftrace patch-site in an instrumented function saves this into r9
and places the trampoline's return address (within the instrumented
function) in x30. A regular C function will return to the address in
x30, but will not restore x9 into x30. Consequently, using a C function
as the trampoline results in returning to the trampoline's return
address having corrupted x30, such that when the instrumented function
returns, it will return back into itself.

To avoid future issues in this area, remove the trace_direct_tramp()
function, and require that each architecture with direct calls provides
a stub trampoline, named ftrace_stub_direct_tramp. This can be written
to handle the architecture's trampoline calling convention, and in
future could be used elsewhere (e.g. in the ftrace ops sample, to
measure the overhead of direct calls), so we may as well always build it
in.

Link: https://lkml.kernel.org/r/20230321140424.345218-8-revest@chromium.orgSigned-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Florent Revest <revest@chromium.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Direct called trampolines can be called in two ways:
- either from the ftrace callsite. In this case, they do not access any
  struct ftrace_regs nor pt_regs
- Or, if a ftrace ops is also attached, from the end of a ftrace
  trampoline. In this case, the call_direct_funcs ops is in charge of
  setting the direct call trampoline's address in a struct ftrace_regs

Since:

commit 9705bc70 ("ftrace: pass fregs to arch_ftrace_set_direct_caller()")

The later case no longer requires a full pt_regs. It only needs a struct
ftrace_regs so DIRECT_CALLS can work with both WITH_ARGS or WITH_REGS.
With architectures like arm64 already abandoning WITH_REGS in favor of
WITH_ARGS, it's important to have DIRECT_CALLS work WITH_ARGS only.

Link: https://lkml.kernel.org/r/20230321140424.345218-7-revest@chromium.orgSigned-off-by: Florent Revest <revest@chromium.org>
Co-developed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>