- 03 Jan, 2022 3 commits
-
-
Martin Blumenstingl authored
When afbcd.ops->init fails we need to free the struct drm_device. Also all errors which come after afbcd.ops->init was successful need to exit the AFBCD, just like meson_drv_unbind() does. Fixes: d1b5e41e ("drm/meson: Add AFBCD module driver") Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Martin Blumenstingl authored
Use this to simplify the driver shutdown. It will also come handy when fixing the error handling in meson_drv_bind_master(). Signed-off-by:
-
Christophe JAILLET authored
sn65dsi83_parse_dt() takes a reference on 'ctx->host_node' that must be released in the error handling path of this function and of the probe. This is only done in the remove function up to now. Fixes: ceb515ba ("drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/4bc21aed4b60d3d5ac4b28d8b07a6fdd8da6a536.1640768126.git.christophe.jaillet@wanadoo.fr
-
- 22 Dec, 2021 1 commit
-
-
Ville Syrjälä authored
Replace the slightly odd "#define <function> NULL" thing with a standard static inline stub. Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211221193754.12287-2-ville.syrjala@linux.intel.comReviewed-by:
Jani Nikula <jani.nikula@intel.com>
-
- 21 Dec, 2021 4 commits
-
-
Alexander Stein authored
VCC needs to be enabled before releasing the enable GPIO. Reviewed-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by:
-
Alexander Stein authored
Add a VCC regulator which needs to be enabled before the EN pin is released. Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Acked-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Jagan Teki <jagan@amarulasolutions.com> Signed-off-by:
-
Alexander Stein authored
The enable signal may not be controllable by the kernel. Make it optional. This is a similar to commit bbda1704 ("drm/bridge: ti-sn65dsi86: Make enable GPIO optional") Reviewed-by:
-
Laurent Pinchart authored
The SN65DSI8x EN signal may be tied to VCC, or otherwise controlled by means not available to the kernel. Make the GPIO optional. Signed-off-by:
-
- 20 Dec, 2021 2 commits
-
-
Claudio Suarez authored
The patch d1af5cd86997 ("drm: get rid of DRM_DEBUG_* log calls in drm core, files drm_a*.c") fails when the drm_device cannot be found in the parameter plane_state->crtc. Fix it using plane_state->plane. Reported-by:kernel test robot <oliver.sang@intel.com> Fixes: 6e22dc35 ("drm: get rid of DRM_DEBUG_* log calls in drm core, files drm_a*.c") Signed-off-by:
Claudio Suarez <cssk@net-c.es> [danvet: fix Fixes: line] Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/YaiXEARd8z2C463h@gineta.localdomain
-
Claudio Suarez authored
igt_check_plane_state test crashes in drm_atomic_helper_check_plane_state when trying to de-reference drm_plane_state->plane->dev due to the lack of a struct drm_plane in the mock struct drm_plane_state. Since drm_plane_state always should contain a plane, the mock also needs a plane to be the test more robust and realistic. Add it. Signed-off-by:
-
- 16 Dec, 2021 30 commits
-
-
Ben Skeggs authored
eDP 1.4 adds a table of link rates supported by the sink to DPCD, as well as a LINK_RATE_SET register to select between the entries in it. If present, we will use this data to generate our internal link rate table rather than using the standard list based on MAX_LINK_RATE. Some recent laptops report MAX_LINK_RATE=0, and require this support. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Reviewed-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
Karol Herbst <kherbst@redhat.com> Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/17
-
Ben Skeggs authored
Signed-off-by:
-
Ben Skeggs authored
Add support for Link-Training Tunable PHY Repeaters, required to support higher bit rates on longer cables, as well as USB-C on certain docks and laptops. Signed-off-by:
-
Ben Skeggs authored
Also use usleep_range() instead of [um]delay() to be a bit nicer. Signed-off-by:
-
Ben Skeggs authored
Required for HBR3 and LTTPR. Signed-off-by:
-
Ben Skeggs authored
Replaces the static list used during link training with a table built dynamically from the union of source and sink capabilities. Preparation for adding support for HBR3, LTTPR and eDP 1.4 link rates. Signed-off-by:
-
Ben Skeggs authored
TPS1/2/3 require scrambling to be disabled. The IED scripts on earlier boards used to handle this, but appear not to anymore. TPS4 support will also require scrambling to remain enabled. Signed-off-by:
-
Ben Skeggs authored
Signed-off-by:
-
Zack Rusin authored
vmw_user_bo_lookup can fail to lookup user buffers, especially because the buffer handles come from the userspace. The return value has to be checked before the buffers are put back. This was spotted by Dan's Smatch statick checker: drivers/gpu/drm/vmwgfx/vmwgfx_bo.c:574 vmw_user_bo_synccpu_release() error: uninitialized symbol 'vmw_bo'. Signed-off-by:Zack Rusin <zackr@vmware.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Fixes: 8afa13a0 ("drm/vmwgfx: Implement DRIVER_GEM") Reviewed-by:
Martin Krastev <krastevm@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211215200224.3693345-1-zack@kde.org
-
Zack Rusin authored
Before the driver had screen targets support we had to disable explicit bringup of its infrastructure because it was breaking screen objects support. Since the implementation of screen targets landed there hasn't been a reason to explicitly disable it and the options were never used. Remove of all that unused code. Signed-off-by:
-
Zack Rusin authored
Old versions of the svga device used to export virtual vram, handling of which was optimized on top of transparent hugepages support. Only very old devices (OpenGL 2.1 support and earlier) used this code and at this point performance differences are negligible. Because the code requires very old hardware versions to run it has been largely untested and unused for a long time. Furthermore removal of the ttm hugepages support in: commit 0d979509 ("drm/ttm: remove ttm_bo_vm_insert_huge()") broke the coherency mode in vmwgfx when running with hugepages. Fixes: 0d979509 ("drm/ttm: remove ttm_bo_vm_insert_huge()") Signed-off-by:
Maaz Mombasawala <mombasawalam@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211215184147.3688785-2-zack@kde.org
-
Zack Rusin authored
On i386 size_t is of course 32bits and using long int throws warnings, trivially fix it by using the dedicated size_t format. This is enough to fix the following warning found by the kernel test robot: drivers/gpu/drm/vmwgfx/vmwgfx_gem.c: In function 'vmw_bo_print_info': >> drivers/gpu/drm/vmwgfx/vmwgfx_gem.c:230:33: warning: format '%ld' expects argument of type 'long int', but argument 4 has type 'size_t' {aka 'unsigned int'} [-Wformat=] 230 | seq_printf(m, "\t\t0x%08x: %12ld bytes %s, type = %s", | ~~~~^ | | | long int | %12d 231 | id, bo->base.base.size, placement, type); | ~~~~~~~~~~~~~~~~~~ | | Reported-by:kernel test robot <lkp@intel.com> Signed-off-by:
-
Paul Boddie authored
Add support for the LCD controller present on JZ4780 SoCs. This SoC uses 8-byte descriptors which extend the current 4-byte descriptors used for other Ingenic SoCs. Tested on MIPS Creator CI20 board. Signed-off-by:
Paul Boddie <paul@boddie.org.uk> Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/msgid/caf9e56b64b0717563e03172b30fa03736e92e15.1638470392.git.hns@goldelico.com
-
H. Nikolaus Schaller authored
This changes the way the regmap is allocated to prepare for the later addition of the JZ4780 which has more registers and bits than the others. Therefore we make the regmap as big as the reg property in the device tree tells. Suggested-by:
-
Xiang wangx authored
struct of_device_id should normally be const. Signed-off-by:
Xiang wangx <wangxiang@cdjrlc.com> Reviewed-by:
Jyri Sarha <jyri.sarha@iki.fi> Signed-off-by:
-
Thomas Zimmermann authored
Backmerging for v5.16-rc5. Resolves a conflict between drm-misc-next and drm-misc-fixes in the vc4 driver. Signed-off-by:Thomas Zimmermann <tzimmermann@suse.de>
-
Stephen Boyd authored
Set the maximum register to 0xff so we can dump the registers for this device in debugfs. Fixes: a095f15c ("drm/bridge: add support for sn65dsi86 bridge driver") Cc: Rob Clark <robdclark@chromium.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
-
Thomas Zimmermann authored
Move I2C code into its own source file. Makes the mode-setting code a little less convoluted. v3: * fix SPDX tag to say 'SPDX-License-Identifier' Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20211206091125.29501-4-tzimmermann@suse.de
-
Thomas Zimmermann authored
Release the I2C adapter as part of the DRM device cleanup. Remove ast's dedicated helper for struct drm_connector_funcs.destroy. Signed-off-by:
-
Thomas Zimmermann authored
I2C initialization is allowed to fail. In this case, create a connector without DDC adapter. The current code would dereference a NULL pointer. Reading the modes from the connector is supposed to work without I2C adapter. Add the respective test. v2: * init edid to NULL to avoid uninitialized read (Dan) Signed-off-by:
-
Dave Stevenson authored
The BT601/BT709 color encoding and limited vs full range properties were not being exposed, defaulting always to BT601 limited range. Expose the parameters and set the registers appropriately. Signed-off-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by:
-
Dave Stevenson authored
The P030 format, used with the DRM_FORMAT_MOD_BROADCOM_SAND128 modifier, is a format output by the video decoder on the BCM2711. Add native support to the KMS planes for that format. Signed-off-by:
-
Dave Stevenson authored
Adds a format that is 3 10bit YUV 4:2:0 samples packed into a 32bit word (with 2 spare bits). Supported on Broadcom BCM2711 chips. Signed-off-by:
-
Hector Martin authored
This is the format used by the bootloader framebuffer on Apple ARM64 platforms. Reviewed-by:
Hector Martin <marcan@marcan.st> Signed-off-by:
-
Hector Martin authored
Add XRGB8888 emulation support for devices that can only do XRGB2101010. This is chiefly useful for simpledrm on Apple devices where the bootloader-provided framebuffer is 10-bit. Signed-off-by:
-
Hector Martin authored
This code is required for both simplefb and simpledrm, so let's move it into the OF core instead of having it as an ad-hoc initcall in the drivers. Signed-off-by:
-
Marek Vasut authored
Add Team Source Display TST043015CMHX 4.3" 480x272 DPI panel support. Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Sam Ravnborg <sam@ravnborg.org> To: dri-devel@lists.freedesktop.org Signed-off-by:
-
Marek Vasut authored
Add Team Source Display TST043015CMHX 4.3" 480x272 DPI panel compatible string. Signed-off-by:
-
Marek Vasut authored
Add vendor prefix for Team Source Display Technology Co., Ltd. Signed-off-by:
-
Marek Vasut authored
The OnSemi FIN3385 Parallel-to-LVDS encoder has a dedicated input line to select input pixel data sampling edge. Add DT property "pclk-sample", not the same as the one used by display timings but rather the same as used by media, and configure bus flags based on this DT property. Signed-off-by:
-
