- 16 Mar, 2023 20 commits
-
-
Jakub Kicinski authored
Saeed Mahameed says: ==================== mlx5-updates-2023-03-13 1) Trivial cleanup patches 2) By Sandipan Patra: Implement thermal zone to report NIC temperature 3) Adham Faris, Improves devlink health diagnostics for netdev objects 4) From Maor, Enable TC offload for egress and engress MACVLAN over bond 5) From Gal, add devlink hairpin queues parameters to replace debugfs as was discussed in [1]: [1] https://lore.kernel.org/all/20230111194608.7f15b9a1@kernel.org/ ==================== Link: https://lore.kernel.org/all/20230314054234.267365-1-saeed@kernel.org/Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Maor Dickman authored
Support offloading of TC rules that mirror/redirect egress traffic to a MACVLAN device, which is attached to bond device which master mlx5 devices. Signed-off-by:
Maor Dickman <maord@nvidia.com> Reviewed-by:
Roi Dayan <roid@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20230314054234.267365-16-saeed@kernel.orgSigned-off-by:
-
Maor Dickman authored
Support offloading of TC rules that filter ingress traffic from a MACVLAN device, which is attached to bond device. Signed-off-by:
-
Maor Dickman authored
In preparation for next patch which will add new check if device block can be setup, extract all existing checks to function to make it more readable and maintainable. Signed-off-by:
-
Gal Pressman authored
Print the number of hairpin queues and size as part of the hairpin table dump. Signed-off-by:
Gal Pressman <gal@nvidia.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
-
Gal Pressman authored
We refer to a TC NIC rule that involves forwarding as "hairpin". Hairpin queues are mlx5 hardware specific implementation for hardware forwarding of such packets. Per the discussion in [1], move the hairpin queues control (number and size) from debugfs to devlink. Expose two devlink params: - hairpin_num_queues: control the number of hairpin queues - hairpin_queue_size: control the size (in packets) of the hairpin queues [1] https://lore.kernel.org/all/20230111194608.7f15b9a1@kernel.org/Signed-off-by:
-
Gal Pressman authored
Downstream patches require devlink params to access the PTYS register, move the needed functions from mlx5e to the core layer. Signed-off-by:
-
Adham Faris authored
Currently RQ health diagnostics doesn't inform the user whether an RQ is an XSK RQ or not. Address this, by adding XSK state flag to RQ SW state enum in core/en.h. XSK will be '1' if current RQ is an XSK RQ, and it will be '0' if it's not. In this example below, it can be seen that XSK field value is '1' since xdpsock program have been attached to channel 0 before issuing the devlink query command: $ devlink health diagnose auxiliary/mlx5_core.eth.0/65535 reporter rx Output: ======================================================================= Common config: RQ: type: 2 stride size: 4096 size: 16 ts_format: FRC CQ: stride size: 64 size: 1024 RQs: channel ix: 0 rqn: 4236 HW state: 1 WQE counter: 15 posted WQEs: 15 cc: 15 SW State: enabled: 1 recovering: 0 am: 1 no_csum_complete: 1 csum_full: 0 mini_cqe_hw_stridx: 1 shampo: 0 mini_cqe_enhanced: 0 xsk: 1 CQ: cqn: 1085 HW status: 0 ci: 0 size: 1024 EQ: eqn: 7 irqn: 32 vecidx: 0 ci: 5 size: 2048 ICOSQ: sqn: 4229 HW state: 1 cc: 158 pc: 158 WQE size: 2048 CQ: cqn: 1080 cc: 1 size: 2048 Signed-off-by:Adham Faris <afaris@nvidia.com> Reviewed-by:
-
Adham Faris authored
Add SQ SW state textual representation to devlink health diagnostics for tx reporter. SQ SW state can be retrieved by issuing the devlink command below: $ devlink health diagnose auxiliary/mlx5_core.eth.0/65535 reporter tx Output ======================================================================= Common Config: SQ: stride size: 64 size: 1024 ts_format: FRC CQ: stride size: 64 size: 1024 SQs: channel ix: 0 tc: 0 txq ix: 0 sqn: 4170 HW state: 1 stopped: false cc: 0 pc: 0 SW State: enabled: 1 mpwqe: 1 recovering: 0 ipsec: 0 am: 1 vlan_need_l2_inline: 1 pending_xsk_tx: 0 pending_tls_rx_resync: 0 xdp_multibuf: 0 CQ: cqn: 1031 HW status: 0 ci: 0 size: 1024 EQ: eqn: 7 irqn: 32 vecidx: 0 ci: 2 size: 2048 Signed-off-by: -
Adham Faris authored
One of the parameters that is retrieved/printed as a response to devlink health diagnostics for rx reporter is the RQ SW state. It's printed as a bitmap decimal number. Printing it as bitmap is problematic and non informative. In addition User can't count on SW state without accessing the kernel sources (mlx5e rq state enum in en.h). This patch prints RQ SW state in a textual representation, as a key: value pairs, where disabled rq states will appear as '0' and enabled ones will appear as '1'. See below the generated output for rx health diagnostics devlink command: $ devlink health diagnose auxiliary/mlx5_core.eth.0/65535 reporter rx Before: ======================================================================= Common config: RQ: type: 2 stride size: 2048 size: 8 ts_format: FRC CQ: stride size: 64 size: 1024 RQs: channel ix: 0 rqn: 4172 HW state: 1 SW state: 37 WQE counter: 7 posted WQEs: 7 cc: 7 CQ: cqn: 1033 HW status: 0 ci: 0 size: 1024 EQ: eqn: 7 irqn: 32 vecidx: 0 ci: 2 size: 2048 ICOSQ: sqn: 4169 HW state: 1 cc: 74 pc: 74 WQE size: 128 CQ: cqn: 1030 cc: 1 size: 128 channel ix: 1 ... . . After: ======================================================================= Common config: RQ: type: 2 stride size: 2048 size: 8 ts_format: FRC CQ: stride size: 64 size: 1024 RQs: channel ix: 0 rqn: 4172 HW state: 1 WQE counter: 7 posted WQEs: 7 cc: 7 SW State: enabled: 1 recovering: 0 am: 1 no_csum_complete: 0 csum_full: 0 mini_cqe_hw_stridx: 1 shampo: 0 mini_cqe_enhanced: 0 CQ: cqn: 1033 HW status: 0 ci: 0 size: 1024 EQ: eqn: 7 irqn: 32 vecidx: 0 ci: 2 size: 2048 ICOSQ: sqn: 4169 HW state: 1 cc: 74 pc: 74 WQE size: 128 CQ: cqn: 1030 cc: 1 size: 128 channel: ix: 1 ... . . Signed-off-by: -
Adham Faris authored
Dynamic interrupt moderation RQ and SQ feature represented by MLX5E_RQ_STATE_AM and MLX5E_SQ_STATE_AM enums respectively, is not consistent with the feature naming in the driver, and with the formal feature and library names. Hence, change MLX5E_RQ_STATE_AM and MLX5E_SQ_STATE_AM enum type names in core/en.h to MLX5E_RQ_STATE_DIM and MLX5E_SQ_STATE_DIM respectively. Signed-off-by:
-
Rahul Rameshbabu authored
Previous check was comparing against the fifo mask. The mask is size of the fifo (power of two) minus one, so a less than or equal comparator should be used for checking if the fifo has room for the SKB. Signed-off-by:
Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by:
-
Sandipan Patra authored
Implement thermal zone support for mlx5 based HW. The NIC uses temperature sensor provided by ASIC to report current temperature to thermal core. Signed-off-by:
Sandipan Patra <spatra@nvidia.com> Reviewed-by:
-
Jiri Pirko authored
Add comment to mlx5_devlink_params_register() functions so it is clear that only driver init params should be registered here. Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
-
Moshe Shemesh authored
If driver teardown is called while PCI is turned off, there is a race between health recovery and teardown. If health recovery already started it will wait 60 sec trying to see if PCI gets back and it can recover, but actually there is no need to wait anymore once teardown was called. Use the MLX5_BREAK_FW_WAIT flag which is set on driver teardown to break waiting for PCI up. Signed-off-by:
Moshe Shemesh <moshe@mellanox.com> Signed-off-by:
-
Moshe Shemesh authored
When shutdown or remove callbacks are called the driver sets the flag MLX5_BREAK_FW_WAIT, to stop waiting for FW as teardown was called. There is no need to clear the bit as once shutdown or remove were called as there is no way back, the driver is going down. Furthermore, if not cleared the flag can be used also in other loops where we may wait while teardown was already called. Use test_bit() instead of test_and_clear_bit() as there is no need to clear the flag. Signed-off-by:
Moshe Shemesh <moshe@nvidia.com> Signed-off-by:
-
Wolfram Sang authored
'temp' was used before commit c0c99d0c ("net: phy: micrel: remove the use of .ack_interrupt()") refactored the code. Now, we can simplify it a little. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230314124928.44948-1-wsa+renesas@sang-engineering.comSigned-off-by:
-
Wolfram Sang authored
Commit 899a3cbb ("net: phy: remove states PHY_STARTING and PHY_PENDING") missed to update a comment in phy_probe. Remove superfluous "Description:" prefix while we are here. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/20230314124856.44878-1-wsa+renesas@sang-engineering.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== ice: refactor mailbox overflow detection Jake Keller says: The primary motivation of this series is to cleanup and refactor the mailbox overflow detection logic such that it will work with Scalable IOV. In addition a few other minor cleanups are done while I was working on the code in the area. First, the mailbox overflow functions in ice_vf_mbx.c are refactored to store the data per-VF as an embedded structure in struct ice_vf, rather than stored separately as a fixed-size array which only works with Single Root IOV. This reduces the overall memory footprint when only a handful of VFs are used. The overflow detection functions are also cleaned up to reduce the need for multiple separate calls to determine when to report a VF as potentially malicious. Finally, the ice_is_malicious_vf function is cleaned up and moved into ice_virtchnl.c since it is not Single Root IOV specific, and thus does not belong in ice_sriov.c I could probably have done this in fewer patches, but I split pieces out to hopefully aid in reviewing the overall sequence of changes. This does cause some additional thrash as it results in intermediate versions of the refactor, but I think its worth it for making each step easier to understand. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: call ice_is_malicious_vf() from ice_vc_process_vf_msg() ice: move ice_is_malicious_vf() to ice_virtchnl.c ice: print message if ice_mbx_vf_state_handler returns an error ice: pass mbxdata to ice_is_malicious_vf() ice: remove unnecessary &array[0] and just use array ice: always report VF overflowing mailbox even without PF VSI ice: declare ice_vc_process_vf_msg in ice_virtchnl.h ice: initialize mailbox snapshot earlier in PF init ice: merge ice_mbx_report_malvf with ice_mbx_vf_state_handler ice: remove ice_mbx_deinit_snapshot ice: move VF overflow message count into struct ice_mbx_vf_info ice: track malicious VFs in new ice_mbx_vf_info structure ice: convert ice_mbx_clear_malvf to void and use WARN ice: re-order ice_mbx_reset_snapshot function ==================== Link: https://lore.kernel.org/r/20230313182123.483057-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/ptp/ptp_ines.c:783:34: error: ‘ines_ptp_ctrl_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20230312132637.352755-1-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
- 15 Mar, 2023 20 commits
-
-
Alexander Mikhalitsyn authored
Currently, kernel would set MSG_CTRUNC flag if msg_control buffer wasn't provided and SO_PASSCRED was set or if there was pending SCM_RIGHTS. For some reason we have no corresponding check for SO_PASSSEC. In the recvmsg(2) doc we have: MSG_CTRUNC indicates that some control data was discarded due to lack of space in the buffer for ancillary data. So, we need to set MSG_CTRUNC flag for all types of SCM. This change can break applications those don't check MSG_CTRUNC flag. Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Leon Romanovsky <leon@kernel.org> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com> v2: - commit message was rewritten according to Eric's suggestion Acked-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Wenjia Zhang says: ==================== smc: Updates 2023-03-01 The 1st patch is to make implements later do not need to adhere to a specific SEID format. The 2nd patch does some cleanup. ==================== Signed-off-by: -
Stefan Raspl authored
Signed-off-by:
Stefan Raspl <raspl@linux.ibm.com> Signed-off-by:
Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by:
Tony Lu <tonylu@linux.alibaba.com> Signed-off-by:
-
Stefan Raspl authored
Previously, v2 support was derived from a very specific format of the SEID as part of the SMC-D codebase. Make this part of the SMC-D device API, so implementers do not need to adhere to a specific SEID format. Signed-off-by:
Jan Karcher <jaka@linux.ibm.com> Reviewed-by:
-
Josef Miegl authored
The GENEVE tunnel used with IFLA_GENEVE_INNER_PROTO_INHERIT is point-to-point, so set IFF_POINTOPOINT to reflect that. Signed-off-by:
Josef Miegl <josef@miegl.cz> Reviewed-by:
-
Krzysztof Kozlowski authored
Core already sets owner in spi_driver. Signed-off-by:
Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by:
-
Krzysztof Kozlowski authored
Core already sets owner in spi_driver. Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/net/ieee802154/ca8210.c:3174:34: error: ‘ca8210_of_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/net/ieee802154/at86rf230.c:1644:34: error: ‘at86rf230_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/net/ieee802154/mcr20a.c:1340:34: error: ‘mcr20a_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/net/ieee802154/adf7242.c:1322:34: error: ‘adf7242_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/net/phy/spi_ks8995.c:156:34: error: ‘ks8895_spi_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/net/dsa/ocelot/ocelot_ext.c:143:34: error: ‘ocelot_ext_switch_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
Colin Foster <colin.foster@in-advantage.com> Signed-off-by:
-
Krzysztof Kozlowski authored
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/net/dsa/microchip/ksz9477_i2c.c:84:34: error: ‘ksz9477_dt_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/net/dsa/ocelot/seville_vsc9953.c:1070:34: error: ‘seville_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver will match mostly or only by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/net/dsa/lan9303_i2c.c:97:34: error: ‘lan9303_i2c_of_match’ defined but not used [-Werror=unused-const-variable=] drivers/net/dsa/lan9303_mdio.c:157:34: error: ‘lan9303_mdio_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/net/dsa/lantiq_gswip.c:1888:34: error: ‘xway_gphy_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/nfc/trf7970a.c:2232:34: error: ‘trf7970a_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
Mark Greer <mgreer@animalcreek.com> Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it is not relevant here). drivers/net/ethernet/ni/nixge.c:1253:34: error: ‘nixge_dt_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it is not relevant here). drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c:220:34: error: ‘sxgbe_dt_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
