10base2 and 10baseT were accidentally switched.

Noticed by Andreas HÃŒbner, forwarded by Alan Cox.
Signed-off-by: Jeff Garzik <jeff@garzik.org>

This reverts commit e1abecc4.

The driver works on some hardware that skge doesn't handle yet.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Currently qe_bd_t is used in the macro call -- dma_unmap_single,
which is a no-op on PPC32, thus error is hidden today. Starting
with 2.6.24, macro will be replaced by the empty static function,
and erroneous use of qe_bd_t will trigger compilation error.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Reported by Corey Minyard <cminyard@mvista.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Merge branch 'fixes-jgarzik' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes

on return from ioctl calls
Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

A crash upon booting that is caused by bcm43xx has been reported [1] and
found to be due to a work queue being reinitialized while work on that
queue is still pending. This fix modifies the shutdown of work queues and
prevents periodic work from being requeued during shutdown. With this patch,
no more crashes on reboot were observed by the original reporter. I do not
get that particular failure on my system; however, when running a large
number of ifdown/ifup sequences, my system would kernel panic with the
'caps lock' light blinking at roughly a 1 Hz rate. In addition, there were
infrequent failures in the firmware that resulted in 'IRQ READY TIMEOUT'
errors. With this patch, no more of the first type of failure occur, and
incidence of the second type is greatly reduced.

[1] http://bugzilla.kernel.org/show_bug.cgi?id=8937Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch solves a problem that the spidernet driver sometimes fails
to handle IRQ.

The problem happens because,
- In Cell architecture, interrupts may arrive at an interrupt
  controller, even if they are masked by the setting on registers of
  devices. It happens when interrupt packets are sent just before
  the interrupts are masked.
- spidernet interrupt handler compares interrupt reasons with
  interrupt masks, so when such interrupts occurs, spidernet interrupt
  handler returns IRQ_NONE.
- When all of interrupt handler return IRQ_NONE, linux kernel disables
  the IRQ and it no longer delivers interrupts to the interrupt handlers.

spidernet doesn't work after above sequence, because it can't receive
interrupts.

This patch changes spidernet interrupt handler that it compares
interrupt reason with SPIDER_NET_INTX_MASK_VALUE.
Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Update last_rx in registered device struct instead of
in the dummy device.
Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Introduces a module parameter to decide whether the physical
port link state is propagated to the network stack or not.
It makes sense not to take the physical port state into account
on machines with more logical partitions that communicate
with each other. This is always possible no matter what the physical
port state is. Thus eHEA can be considered as a switch there.
Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Lock debugging finds a problem in phy.c and phy_device.c,
this patch fixes it. Tested on an AT91SAM9263-EK board,
kernel 2.6.23-rc4.
Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Need to restore multicast settings on resume and after 'ethtool -r'.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

64-bit DMA causes data corruption with atl1.  We don't know why, and Atheros
is working on it.  For now, just use 32-bit DMA.  This is a big hack that is
probably wrong, but it stops the bleeding.
Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>
Acked-by: Chris Snook <csnook@redhat.com>
Acked-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Move serial_dev_init to device_initcall()
  [POWERPC] Enable GENERIC_ISA_DMA if FSL_ULI1575 to fix compile issue
  [POWERPC] cpm2: Fix off-by-one error in setbrg().
  [PPC] 8xx: Fix r3 trashing due to 8MB TLB page instantiation
  [POWERPC] 8{5,6}xx: Fix build issue with !CONFIG_PCI

One of the very first things lguest_init() does is a memcpy.  On
Athlon/Duron/K7 or CyrixIII/VIA-C3 or Geode GX/LX, this tries to use
MMX.

memcpy -> _mmx_memcpy -> kernel_fpu_begin -> clts -> paravirt_ops.clts

But we haven't set paravirt_ops.clts yet, so we do the native version
and crash.  The simplest solution is to use __memcpy.

Thanks to Michael Rasenberger for the bug report.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

With the I/O space rewrite by BenH, the legacy_serial serial_dev_init()
initcall is now called before I/O space is setup, but it's dependent on
it being available.

Since there's no way to make dependencies between initcalls, we'll just
have to move it to device_initcall(). Yes, it's suboptimal but I'm not
aware of any better solution at this time, and it fixes a regression
from 2.6.22.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Fix a compile error when the directory above the kernel source contains
a file named "kernel".  Originally from Ben LaHaise, modified based on
feedback from Sam Ravnborg
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Ben LaHaise <bcrl@kvack.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

AK: Removed the unlikelies because gcc heuristics default to unlikely
AK: for test == NULL and for negative returns.

Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vdso vgetns() didn't mask the time source offset calculation, which
could lead to time problems with 32bit HPET.  Add the masking.

Thanks to Chuck Ebbert for tracking this down.
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds:
  leds: Add missing include for leds.h

Commit f629307c introduced uses of
kernel_termios_to_user_termios_1 and user_termios_to_kernel_termios_1
on all architectures.  However, powerpc, s390, avr32 and frv don't
currently define those functions since their termios struct didn't
need to be changed when the arbitrary baud rate stuff was added, and
thus the kernel won't currently build on those architectures.

This adds definitions of kernel_termios_to_user_termios_1 and
user_termios_to_kernel_termios_1 to include/asm-generic/termios.h
which are identical to kernel_termios_to_user_termios and
user_termios_to_kernel_termios respectively.  The definitions are the
same because the "old" termios and "new" termios are in fact the same
on these architectures (which are the same ones that use
asm-generic/termios.h).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alan Cox <alan@redhat.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since the ULI1575 has a ISA bus we need to enable the generic ISA dma
support for drivers that might expect it.  Without this we get compile
errors like the following:

ound/built-in.o: In function `claim_dma_lock':
/home/galak/git/linux-8572/include/asm/dma.h:189: undefined reference to `dma_spin_lock'
/home/galak/git/linux-8572/include/asm/dma.h:189: undefined reference to `dma_spin_lock'
sound/built-in.o: In function `release_dma_lock':
/home/galak/git/linux-8572/include/asm/dma.h:195: undefined reference to `dma_spin_lock'
sound/built-in.o: In function `claim_dma_lock':
/home/galak/git/linux-8572/include/asm/dma.h:189: undefined reference to `dma_spin_lock'
/home/galak/git/linux-8572/include/asm/dma.h:189: undefined reference to `dma_spin_lock'
sound/built-in.o:/home/galak/git/linux-8572/include/asm/dma.h:195: more undefined references to `dma_spin_lock' follow
make: *** [.tmp_vmlinux1] Error 1
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [BLUETOOTH]: Fix non-COMPAT build of hci_sock.c

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Fix booting on V100 systems.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: usbtouchscreen - correctly set 'phys'
  Input: i8042 - add HP Pavilion DV4270ca to the MUX blacklist
  Input: i8042 - fix modpost warning
  Input: add more Braille keycodes

Signed-off-by: David S. Miller <davem@davemloft.net>

On the root PCI bus, the OBP device tree lists device 3 twice.
Once as 'pm' and once as 'lomp'.

Everything goes downhill from there.

Ignore the second instance to workaround this.

Thanks to Kövedi_Krisztián for the bug report and
testing the fix.
Signed-off-by: David S. Miller <davem@davemloft.net>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  ocfs2: Fix calculation of i_blocks during truncate
  [PATCH] ocfs2: Fix a wrong cluster calculation.
  [PATCH] ocfs2: fix mount option parsing
  ocfs2: update docs for new features

SERIAL_BFIN=m or SERIAL_MUX=m shouldn't allow SERIAL_CORE_CONSOLE=y.

Additionally, this patch fixes whitespace instead of tabs at the
SERIAL_MUX_CONSOLE option.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Bryan Wu <bryan.wu@analog.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Intel framebuffer mis-calculated pixel clocks.

The pixel clock (and thus both H and V sync) will be slower than requested, so
if you set the minimum allowed the display may not sync.  In case of really
old CRT display it could theoretically damage it.

I'm using it with PAL TV (using RGB input - SCART connector) and the bug
prevented it from working at all (TV requirements are more strict and made the
bug visible).
Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This was posted on Aug 28 and fixes an issue that could cause troubles
when slab caches >=128k are created.

http://marc.info/?l=linux-mm&m=118798149918424&w=2

Currently we simply add the debug flags unconditional when checking for a
matching slab.  This creates issues for sysfs processing when slabs exist
that are exempt from debugging due to their huge size or because only a
subset of slabs was selected for debugging.

We need to only add the flags if kmem_cache_open() would also add them.

Create a function to calculate the flags that would be set
if the cache would be opened and use that function to determine
the flags before looking for a compatible slab.

[akpm@linux-foundation.org: fixlets]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Revert

	commit 656dad31
	Author: Ingo Molnar <mingo@elte.hu>
	Date:   Sat Feb 10 01:46:36 2007 -0800

	[PATCH] highmem: catch illegal nesting

	Catch illegally nested kmap_atomic()s even if the page that is mapped by
	the 'inner' instance is from lowmem.

	This avoids spuriously zapped kmap-atomic ptes and turns hard to find
	crashes into clear asserts at the bug site.

Problem is, a get_zeroed_page(GFP_KERNEL) from interrupt context will trigger
this check if non-irq code on this CPU holds a KM_USER0 mapping.  But that
get_zeroed_page() will never be altering the kmap slot anyway due to the
GFP_KERNEL.

Cc: Christoph Lameter <clameter@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Seems to me that this timer will only get started on platforms that say
they don't want it?
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Gabriel Paubert <paubert@iram.es>
Cc: Zachary Amsden <zach@vmware.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The inode->i_flock list contains the leases, flocks and posix
locks in the specified order. However, the flocks are added in
the head of this list thus hiding the leases from F_GETLEASE
command, from time_out_leases() and other code that expects
the leases to come first.

The following example will demonstrate this:

#define _GNU_SOURCE

#include <unistd.h>
#include <fcntl.h>
#include <stdio.h>
#include <sys/file.h>

static void show_lease(int fd)
{
        int res;

        res = fcntl(fd, F_GETLEASE);
        switch (res) {
                case F_RDLCK:
                        printf("Read lease\n");
                        break;
                case F_WRLCK:
                        printf("Write lease\n");
                        break;
                case F_UNLCK:
                        printf("No leases\n");
                        break;
                default:
                        printf("Some shit\n");
                        break;
        }
}

int main(int argc, char **argv)
{
        int fd, res;

        fd = open(argv[1], O_RDONLY);
        if (fd == -1) {
                perror("Can't open file");
                return 1;
        }

        res = fcntl(fd, F_SETLEASE, F_WRLCK);
        if (res == -1) {
                perror("Can't set lease");
                return 1;
        }

        show_lease(fd);

        if (flock(fd, LOCK_SH) == -1) {
                perror("Can't flock shared");
                return 1;
        }

        show_lease(fd);

        return 0;
}

The first call to show_lease() will show the write lease set, but
the second will show no leases.

Fix the flock adding so that the leases always stay in the head
of this list.

Found during making the flocks pid-namespaces aware.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

G33 has 1MB GTT table range.  Fix GTT mapping in case like 512MB aperture
size.
Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com>
Acked-by: Dave Airlie <airlied@linux.ie>
Cc: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

G33 GTT stolen memory is below graphics data stolen memory and be seperate,
so don't subtract it in stolen mem counting.
Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com>
Acked-by: Dave Airlie <airlied@linux.ie>
Cc: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Taneli Vähäkangas <vahakang@cs.helsinki.fi> reported that commit
786d7e16 aka "Fix rmmod/read/write races
in /proc entries" broke SBCL + SLIME combo.

The old code in do_select() used DEFAULT_POLLMASK, if couldn't find
->poll handler.  The new code makes ->poll always there and returns 0 by
default, which is not correct.  Return DEFAULT_POLLMASK instead.

Steps to reproduce:

	install emacs, SBCL, SLIME
	emacs
	M-x slime	in *inferior-lisp* buffer
	[watch it doing "Connecting to Swank on port X.."]

Please, apply before 2.6.23.

P.S.: why SBCL can't just read(2) /proc/cpuinfo is a mystery.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: T Taneli Vahakangas <vahakang@cs.helsinki.fi>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The semantics of call_usermodehelper_pipe() used to be that it would fork
the helper, and wait for the kernel thread to be started.  This was
implemented by setting sub_info.wait to 0 (implicitly), and doing a
wait_for_completion().

As part of the cleanup done in 0ab4dc92,
call_usermodehelper_pipe() was changed to pass 1 as the value for wait to
call_usermodehelper_exec().

This is equivalent to setting sub_info.wait to 1, which is a change from
the previous behaviour.  Using 1 instead of 0 causes
__call_usermodehelper() to start the kernel thread running
wait_for_helper(), rather than directly calling ____call_usermodehelper().

The end result is that the calling kernel code blocks until the user mode
helper finishes.  As the helper is expecting input on stdin, and now no one
is writing anything, everything locks up (observed in do_coredump).

The fix is to change the 1 to UMH_WAIT_EXEC (aka 0), indicating that we
want to wait for the kernel thread to be started, but not for the helper to
finish.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I ran into a few problems.

n_tty_ioctl() for instance:

drivers/char/tty_ioctl.c:799: error: $,1rxstruct termios$,1ry has no
member named $,1rxc_ispeed$,1ry

This is calling the copy interface that is supposed to be using
a termios2 when the new interfaces are defined, however:

	case TIOCGLCKTRMIOS:
		if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios_locked))
			return -EFAULT;
		return 0;

This is going to write over the end of the userspace
structure by a few bytes, and wasn't caught by you yet
because the i386 implementation is simply copy_to_user()
which does zero type checking.
Signed-off-by: Alan Cox <alan@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>