- 03 Nov, 2011 40 commits
-
-
Guennadi Liakhovetski authored
Camera-switching GPIOs are provided by a i2c GPIO extender, switching them can send the caller to sleep. Use the GPIO API *_cansleep methods explicitly to avoid runtime warnings. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Guennadi Liakhovetski authored
Prepare the board to switch to the new subdevice media-bus configuration operations. Signed-off-by:
Magnus Damm <damm@opensource.se> Signed-off-by:
-
Guennadi Liakhovetski authored
Prepare the board to switch to the new subdevice media-bus configuration operations. Signed-off-by:
-
Guennadi Liakhovetski authored
With the new subdevice media-bus configuration methods bus-width is not configured along with other bus parameters, instead, it is derived from the data format. With those methods it is convenient to specify supported bus-widths in the platform data as (1 << (width - 1)). We redefine SOCAM_DATAWIDTH_* flags to use the same convention to make platform data seemlessly reusable. Signed-off-by:
-
Guennadi Liakhovetski authored
Extend the driver to also support [gs]_mbus_config() subdevice video operations. Signed-off-by:
-
Guennadi Liakhovetski authored
Extend the driver to also support [gs]_mbus_config() subdevice video operations. Signed-off-by:
-
Guennadi Liakhovetski authored
Cropping is not really correctly implemented by this driver and only needlessly obfuscates the code. Remove it. Signed-off-by:
-
Guennadi Liakhovetski authored
Extend the driver to also support [gs]_mbus_config() subdevice video operations. Signed-off-by:
-
Guennadi Liakhovetski authored
Switch the meaning of the .lanes platform data parameter to specify the number of used lanes instead of a bitmask. Verify bus configuration compatibility with client's capabilities. Signed-off-by:
-
Guennadi Liakhovetski authored
The sh_mobile_csi2 driver will change meaning of the .lanes platform data field from "bitmask of used lanes" to "number of used lanes." To avoid a regression during this transition switch ap4evb to rely on the 2 lane default. Signed-off-by:
-
Guennadi Liakhovetski authored
Extend the driver to also support [gs]_mbus_config() subdevice video operations. Signed-off-by:
-
Guennadi Liakhovetski authored
Extend the driver to also support [gs]_mbus_config() subdevice video operations. Signed-off-by:
-
Guennadi Liakhovetski authored
Extend the driver to also support [gs]_mbus_config() subdevice video operations. Signed-off-by:
-
Guennadi Liakhovetski authored
Extend the driver to also support [gs]_mbus_config() subdevice video operations. Signed-off-by:
-
Guennadi Liakhovetski authored
Macros, defined in a header under include/ should be kept in a local namespace and not pollute the global one. Signed-off-by:
-
Guennadi Liakhovetski authored
Extend the driver to also support [gs]_mbus_config() subdevice video operations. Signed-off-by:
-
Guennadi Liakhovetski authored
Extend the driver to also support [gs]_mbus_config() subdevice video operations. Signed-off-by:
-
Guennadi Liakhovetski authored
Extend the driver to also support [gs]_mbus_config() subdevice video operations. Signed-off-by:
-
Guennadi Liakhovetski authored
Extend the driver to also support [gs]_mbus_config() subdevice video operations. Signed-off-by:
-
Guennadi Liakhovetski authored
Extend the driver to also support [gs]_mbus_config() subdevice video operations. Signed-off-by:
-
Guennadi Liakhovetski authored
Extend the driver to also support [gs]_mbus_config() subdevice video operations. Signed-off-by:
-
Guennadi Liakhovetski authored
Extend the driver to also support [gs]_mbus_config() subdevice video operations. Signed-off-by:
-
Guennadi Liakhovetski authored
Extend the driver to also support [gs]_mbus_config() subdevice video operations. Signed-off-by:
-
Guennadi Liakhovetski authored
Add helper functions to process the new media bus configuration type similar to soc_camera_apply_sensor_flags() and soc_camera_bus_param_compatible(). Signed-off-by:
-
Guennadi Liakhovetski authored
Extend the driver to also support [gs]_mbus_config() subdevice video operations. Signed-off-by:
-
Guennadi Liakhovetski authored
Signed-off-by:
-
Guennadi Liakhovetski authored
In interlaced interleaved mode field offset for deinterlacing depends on the pixel format. Signed-off-by:
-
Guennadi Liakhovetski authored
If the client has managed to configure the precise output format, we don't have to try to further improve it. Signed-off-by:
-
Guennadi Liakhovetski authored
CEU can only produce images with 4 pixel aligned width and height. Enforce this alignment, adjust comments and simplify some calculations. Signed-off-by:
-
Mauro Carvalho Chehab authored
In practice, it is being hard to distinguish when a patch should go to staging tree or to the media tree. Better to distinguish it, by putting the media drivers at a separate staging directory. Newer staging drivers that include anything with "dvb*.h", "v4l2*.h" or "videodev2.h" should go to the drivers/staging/media tree. Acked-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
-
Mauro Carvalho Chehab authored
This driver had the major issues already fixed. Move it out of staging. Acked-by:
-
Sylwester Nawrocki authored
Remove #if's related to kernel version and the code not applicable to 3.2+ kernels. Cc: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
Sylwester Nawrocki <snjw23@gmail.com> Signed-off-by:
-
Sylwester Nawrocki authored
The driver depends on DVB_CORE so there is no need for conditional compilation of parts of the code depending on CONFIG_DVB_CORE as the driver is never compiled with CONFIG_DVB_CORE* disabled. Cc: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
-
Piotr Chmura authored
Add support for nBox Tuner Dongle based on the same chip. Cc: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
Piotr Chmura <chmooreck@poczta.onet.pl> Signed-off-by:
-
Piotr Chmura authored
Fix compilation errors in the USB driver by replacing usb_buffer_free(), usb_buffer_alloc() with usb_free_coherent() and usb_alloc_coherent(). Add entries for the driver in parent Makefile and Kconfig. [snjw23@gmail.com: minor edit to changelog] Cc: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
-
Sylwester Nawrocki authored
Also amend some mismatched comments. Cc: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
-
Piotr Chmura authored
Remove inclusion of Windows and other not linux related headers. [snjw23@gmail.com: edited changelog, folded long line in Makefile] Cc: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
-
Pierrick Hascoet authored
Fix a couple of files which were supposed by be relicensed as GPL but were overlooked. Signed-off-by:
Pierrick Hascoet <pierrick.hascoet@abilis.com> Signed-off-by:
Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
-
Devin Heitmueller authored
Properly handle the case where the driver can be associated with multiple different products (as opposed to always saying the device is named after the value in a #define). Signed-off-by:
-
Devin Heitmueller authored
Add support for the Elgato EyeTV DTT Deluxe. Note that the product name field has not yet been abstracted out, so it will still identify itself as a PCTV 74e. The driver was originally built by the chipset manufacturer so that the product vendor can specify the device name via a #define, but wasn't setup to support multiple products from the same build of the driver. Thanks to Joerg Unglaub for suggesting this change. Signed-off-by:
-
