- 10 Sep, 2013 32 commits
-
-
Thomas Loo authored
commit 84eb2ae1 upstream. The Fujitsu Lifebook UH552/UH572 ships with a Qualcomm AR9462/AR3012 WLAN/BT-Combo card. Add device ID to the ath3k driver to enable the bluetooth side of things. Patch against v3.10. T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04c5 ProdID=1330 Rev=00.02 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by:
Thomas Loo <tloo@saltstorm.net> Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Cho, Yu-Chen authored
commit 178c059e upstream. This patch adds support for Mediatek Bluetooth device T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0e8d ProdID=763f Rev= 1.00 S: Manufacturer=MediaTek S: Product=BT S: SerialNumber=1.0 C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=450mA A: FirstIf#= 0 IfCount= 2 Cls=ff(vend.) Sub=ff Prot=ff I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms Signed-off-by:
Cho, Yu-Chen <acho@suse.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Noguchi Kazutosi authored
commit 0fc110f4 upstream. Add support for the AR3012 chip. T: Bus=01 Lev=02 Prnt=02 Port=05 Cnt=03 Dev#= 21 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e04d Rev=00.02 S: Manufacturer=Atheros Communications S: Product=Bluetooth USB Host Controller S: SerialNumber=Alaska Day 2006 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by:
Noguchi Kazutosi <linux@scaltinof.net> Signed-off-by:
-
Oleksij Rempel authored
commit dc2a87f5 upstream. Currently we configure harwdare and clock, only after interface start. In this case, if we reload module or reboot PC without configuring adapter, firmware will freeze. There is no software way to reset adpter. This patch add initial configuration and set it in disabled state, to avoid this freeze. Behaviour of this patch should be similar to: ifconfig wlan0 up; ifconfig wlan0 down. Bug: https://github.com/qca/open-ath9k-htc-firmware/issues/1Tested-by:
Bo Shi <cnshibo@gmail.com> Signed-off-by:
Oleksij Rempel <linux@rempel-privat.de> Signed-off-by:
-
Emmanuel Grumbach authored
commit a1923f1d upstream. This SKU was missing in the list of supported devices https://bugzilla.kernel.org/show_bug.cgi?id=60577Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> [bwh: Backported to 3.2: adjust filename] Signed-off-by:
-
Johannes Berg authored
commit 707aee40 upstream. The BT_CONFIG command that is sent to the device during startup will enable BT coex unless the module parameter turns it off, but on devices without Bluetooth this may cause problems, as reported in Redhat BZ 885407. Fix this by sending the BT_CONFIG command only when the device has Bluetooth. Reviewed-by:
Johannes Berg <johannes@sipsolutions.net> [bwh: Backported to 3.2: - Adjust filename - s/priv->lib/priv->cfg/] Signed-off-by:
-
Johannes Berg authored
commit 6b0f3274 upstream. The duplicate retransmission detection code in mac80211 erroneously attempts to do the check for every frame, even frames that don't have a sequence control field or that don't use it (QoS-Null frames.) This is problematic because it causes the code to access data beyond the end of the SKB and depending on the data there will drop packets erroneously. Correct the code to not do duplicate detection for such frames. I found this error while testing AP powersave, it lead to retransmitted PS-Poll frames being dropped entirely as the data beyond the end of the SKB was always zero. Signed-off-by:
-
Michal Kazior authored
commit a0ec570f upstream. These two events were sent to the default network namespace. This caused AP mode in a non-default netns to not work correctly. Mgmt tx status was multicasted to a different (default) netns instead of the one the AP was in. Signed-off-by:
Michal Kazior <michal.kazior@tieto.com> Signed-off-by:
-
Linus Torvalds authored
commit 3c0b9de6 upstream. I think we could just move the full vm_iomap_memory() function into util.h or similar, but I didn't get any reply from anybody actually using nommu even to this trivial patch, so I'm not going to touch it any more than required. Here's the fairly minimal stub to make the nommu case at least potentially work. It doesn't seem like anybody cares, though. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Dave Kleikamp authored
commit 44512449 upstream. NFSv4 reserves readdir cookie values 0-2 for special entries (. and ..), but jfs allows a value of 2 for a non-special entry. This incompatibility can result in the nfs client reporting a readdir loop. This patch doesn't change the value stored internally, but adds one to the value exposed to the iterate method. Signed-off-by:
Dave Kleikamp <dave.kleikamp@oracle.com> Tested-by:
Christian Kujau <lists@nerdbynature.de> [bwh: Backported to 3.2: - Adjust context - s/ctx->pos/filp->f_pos/] Signed-off-by:
-
Dan Carpenter authored
commit 0439f31c upstream. This seems like it could overflow on 32 bits. Use kmalloc_array() which has overflow protection built in. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
-
Xi Wang authored
commit a8203725 upstream. Introduce a kmalloc_array() wrapper that performs integer overflow checking without zeroing the memory. Suggested-by:
Andrew Morton <akpm@linux-foundation.org> Suggested-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Xi Wang <xi.wang@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
David Rientjes <rientjes@google.com> Signed-off-by:
Pekka Enberg <penberg@kernel.org> Signed-off-by:
-
Dan Carpenter authored
commit bd5fe738 upstream. "idx" is controled by the user and can be a negative offset into the input_names[] array. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Torstein Hegge authored
commit 61ac5130 upstream. UAC2_EXTENSION_UNIT_V2 differs from UAC1_EXTENSION_UNIT, but can be handled in the same way when parsing the unit. Otherwise parse_audio_unit() fails when it sees an extension unit on a UAC2 device. UAC2_EXTENSION_UNIT_V2 is outside the range allocated by UAC1. Signed-off-by:
Torstein Hegge <hegge@resisty.net> Acked-by:
Daniel Mack <zonque@gmail.com> Signed-off-by:
-
Eldad Zack authored
commit 5dae5fd2 upstream. Current code mishandles the case where the device is a UAC2 and the bDescriptorSubtype is a UAC2 Effect Unit (0x07). It tries to parse it as a Processing Unit (which is similar to two other UAC1 units with overlapping subtypes), but since the structure is different (See: 4.7.2.10, 4.7.2.11 in UAC2 standard), the parsing is done incorrectly and prevents the device from initializing. For now, just ignore the unit. Signed-off-by:
Eldad Zack <eldad@fogrefinery.com> Signed-off-by:
-
Nicolas Dichtel authored
commit 85dfb745 upstream. This field was left uninitialized. Some user daemons perform check against this field. Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Daniel Vetter authored
commit 520c41cf upstream. LVDS is the first output where dpms on/off and prepare/commit don't perfectly match. Now the idea behind this special case seems to be that for simple resolution changes on the LVDS we don't need to stop the pipe, because (at least on newer chips) we can adjust the panel fitter on the fly. There are a few problems with the current code though: - We still stop and restart the pipe unconditionally, because the crtc helper code isn't flexible enough. - We show some ugly flickering, especially when changing crtcs (this the crtc helper would actually take into account, but we don't implement the encoder->get_crtc callback required to make this work properly). So it doesn't even work as advertised. I agree that it would be nice to do resolution changes on LVDS (and also eDP) whithout blacking the screen where the panel fitter allows to do that. But imo we should implement this as a special case a few layers up in the mode set code, akin to how we already detect simple framebuffer changes (and only update the required registers with ->mode_set_base). Until this is all in place, make our lives easier and just rip it out. Also note that this seems to fix actual bugs with enabling the lvds output, see: http://lists.freedesktop.org/archives/intel-gfx/2012-July/018614.html Cc: Takashi Iwai <tiwai@suse.de> Cc: Giacomo Comes <comes@naic.edu> Acked-by:
Chris Wilson <chris@chris-wilson.co.uk> Tested-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 8cb3b9c3 ] The "pvc" struct has a hole after pvc.sap_family which is not cleared. Signed-off-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit ff862a46 ] This is inspired by a5cc68f3 "af_key: fix info leaks in notify messages". There are some struct members which don't get initialized and could disclose small amounts of private information. Acked-by:
Mathias Krause <minipli@googlemail.com> Signed-off-by:
-
David S. Miller authored
[ Upstream commit a0db856a ] Make sure the reserved fields, and padding (if any), are fully initialized. Based upon a patch by Dan Carpenter and feedback from Joe Perches. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 20f01703 ] usbnet doesn't support yet SG, so drivers should not advertise SG or TSO capabilities, as they allow TCP stack to build large TSO packets that need to be linearized and might use order-5 pages. This adds an extra copy overhead and possible allocation failures. Current code ignore skb_linearize() return code so crashes are even possible. Best is to not pretend SG/TSO is supported, and add this again when/if usbnet really supports SG for devices who could get a performance gain. Based on a prior patch from Freddy Xin <freddy@asix.com.tw> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 905a6f96 ] Otherwise we end up dereferencing the already freed net->ipv6.mrt pointer which leads to a panic (from Srivatsa S. Bhat): BUG: unable to handle kernel paging request at ffff882018552020 IP: [<ffffffffa0366b02>] ip6mr_sk_done+0x32/0xb0 [ipv6] PGD 290a067 PUD 207ffe0067 PMD 207ff1d067 PTE 8000002018552060 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC Modules linked in: ebtable_nat ebtables nfs fscache nf_conntrack_ipv4 nf_defrag_ipv4 ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables nfsd lockd nfs_acl exportfs auth_rpcgss autofs4 sunrpc 8021q garp bridge stp llc ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter +ip6_tables ipv6 vfat fat vhost_net macvtap macvlan vhost tun kvm_intel kvm uinput iTCO_wdt iTCO_vendor_support cdc_ether usbnet mii microcode i2c_i801 i2c_core lpc_ich mfd_core shpchp ioatdma dca mlx4_core be2net wmi acpi_cpufreq mperf ext4 jbd2 mbcache dm_mirror dm_region_hash dm_log dm_mod CPU: 0 PID: 7 Comm: kworker/u33:0 Not tainted 3.11.0-rc1-ea45e-a #4 Hardware name: IBM -[8737R2A]-/00Y2738, BIOS -[B2E120RUS-1.20]- 11/30/2012 Workqueue: netns cleanup_net task: ffff8810393641c0 ti: ffff881039366000 task.ti: ffff881039366000 RIP: 0010:[<ffffffffa0366b02>] [<ffffffffa0366b02>] ip6mr_sk_done+0x32/0xb0 [ipv6] RSP: 0018:ffff881039367bd8 EFLAGS: 00010286 RAX: ffff881039367fd8 RBX: ffff882018552000 RCX: dead000000200200 RDX: 0000000000000000 RSI: ffff881039367b68 RDI: ffff881039367b68 RBP: ffff881039367bf8 R08: ffff881039367b68 R09: 2222222222222222 R10: 2222222222222222 R11: 2222222222222222 R12: ffff882015a7a040 R13: ffff882014eb89c0 R14: ffff8820289e2800 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88103fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff882018552020 CR3: 0000000001c0b000 CR4: 00000000000407f0 Stack: ffff881039367c18 ffff882014eb89c0 ffff882015e28c00 0000000000000000 ffff881039367c18 ffffffffa034d9d1 ffff8820289e2800 ffff882014eb89c0 ffff881039367c58 ffffffff815bdecb ffffffff815bddf2 ffff882014eb89c0 Call Trace: [<ffffffffa034d9d1>] rawv6_close+0x21/0x40 [ipv6] [<ffffffff815bdecb>] inet_release+0xfb/0x220 [<ffffffff815bddf2>] ? inet_release+0x22/0x220 [<ffffffffa032686f>] inet6_release+0x3f/0x50 [ipv6] [<ffffffff8151c1d9>] sock_release+0x29/0xa0 [<ffffffff81525520>] sk_release_kernel+0x30/0x70 [<ffffffffa034f14b>] icmpv6_sk_exit+0x3b/0x80 [ipv6] [<ffffffff8152fff9>] ops_exit_list+0x39/0x60 [<ffffffff815306fb>] cleanup_net+0xfb/0x1a0 [<ffffffff81075e3a>] process_one_work+0x1da/0x610 [<ffffffff81075dc9>] ? process_one_work+0x169/0x610 [<ffffffff81076390>] worker_thread+0x120/0x3a0 [<ffffffff81076270>] ? process_one_work+0x610/0x610 [<ffffffff8107da2e>] kthread+0xee/0x100 [<ffffffff8107d940>] ? __init_kthread_worker+0x70/0x70 [<ffffffff8162a99c>] ret_from_fork+0x7c/0xb0 [<ffffffff8107d940>] ? __init_kthread_worker+0x70/0x70 Code: 20 48 89 5d e8 4c 89 65 f0 4c 89 6d f8 66 66 66 66 90 4c 8b 67 30 49 89 fd e8 db 3c 1e e1 49 8b 9c 24 90 08 00 00 48 85 db 74 06 <4c> 39 6b 20 74 20 bb f3 ff ff ff e8 8e 3c 1e e1 89 d8 4c 8b 65 RIP [<ffffffffa0366b02>] ip6mr_sk_done+0x32/0xb0 [ipv6] RSP <ffff881039367bd8> CR2: ffff882018552020 Reported-by:
Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Tested-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Neil Horman authored
[ Upstream commit c5c7774d ] In commit 2f94aabd (refactor sctp_outq_teardown to insure proper re-initalization) we modified sctp_outq_teardown to use sctp_outq_init to fully re-initalize the outq structure. Steve West recently asked me why I removed the q->error = 0 initalization from sctp_outq_teardown. I did so because I was operating under the impression that sctp_outq_init would properly initalize that value for us, but it doesn't. sctp_outq_init operates under the assumption that the outq struct is all 0's (as it is when called from sctp_association_init), but using it in __sctp_outq_teardown violates that assumption. We should do a memset in sctp_outq_init to ensure that the entire structure is in a known state there instead. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Reported-by:
"West, Steve (NSN - US/Fort Worth)" <steve.west@nsn.com> CC: Vlad Yasevich <vyasevich@gmail.com> CC: netdev@vger.kernel.org CC: davem@davemloft.net Acked-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
Michal Tesar authored
[ Upstream commit 651e9271 ] Limit the min/max value passed to the /proc/sys/net/ipv4/tcp_syn_retries. Signed-off-by:
Michal Tesar <mtesar@redhat.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 087d273c ] This patch doesn't change the compiled code because ARC_HDR_SIZE is 4 and sizeof(int) is 4, but the intent was to use the header size and not the sizeof the header size. Signed-off-by:
-
Joshua Zhu authored
commit d0528b5d upstream. Judging anonymous memory's vm_area_struct, perf_mmap_event's filename will be set to "//anon" indicating this vma belongs to anonymous memory. Once hugepage is used, vma's vm_file points to hugetlbfs. In this way, this vma will not be regarded as anonymous memory by is_anon_memory() in perf user space utility. Signed-off-by:
Joshua Zhu <zhu.wen-jie@hp.com> Cc: Akihiro Nagai <akihiro.nagai.hw@hitachi.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Joshua Zhu <zhu.wen-jie@hp.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1357363797-3550-1-git-send-email-zhu.wen-jie@hp.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Jiri Olsa authored
commit 0231bb53 upstream. When we have group with mixed events (hw/sw) we want to end up with group leader being in hw context. So if group leader is initialy sw event, we move all the events under hw context. The move is done for each event by removing it from its context and adding it back into proper one. As a part of the removal the event is automatically disabled, which is not what we want at this stage of creating groups. The fix is to initialize event state after removal from sw context. This fix resulted from the following discussion: http://thread.gmane.org/gmane.linux.kernel.perf.user/1144Reported-by:
Andreas Hollmann <hollmann@in.tum.de> Signed-off-by:
Jiri Olsa <jolsa@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Vince Weaver <vince@deater.net> Link: http://lkml.kernel.org/r/1359714225-4231-1-git-send-email-jolsa@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Kamal Mostafa authored
commit e85843be upstream. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=47941 BugLink: https://bugs.launchpad.net/bugs/1163720 BugLink: https://bugs.launchpad.net/bugs/1162026 Some machines suffer from non-functional backlight controls if BLM_PCH_PWM_ENABLE is set, so provide a quirk to avoid doing so. Apply this quirk to Dell XPS 13 models. Tested-by:
Eric Griffith <EGriffith92@gmail.com> Tested-by:
Kent Baxley <kent.baxley@canonical.com> Signed-off-by:
Kamal Mostafa <kamal@canonical.com> Signed-off-by:
-
Zhu Yanhai authored
commit a59f4e07 upstream. The caller of sched_sliced() should pass se.cfs_rq and se as the arguments, however in sched_rr_get_interval() we gave it rq.cfs_rq and se, which made the following computation obviously wrong. The change was introduced by commit: 77034937 sched: fix crash in sys_sched_rr_get_interval() ... 5 years ago, while it had been the correct 'cfs_rq_of' before the commit. The change seems to be irrelevant to the commit msg, which was to return a 0 timeslice for tasks that are on an idle runqueue. So I believe that was just a plain typo. Signed-off-by:
Zhu Yanhai <gaoyang.zyh@taobao.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Turner <pjt@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1357621012-15039-1-git-send-email-gaoyang.zyh@taobao.com [ Since this is an ABI and an old bug, we'll test this via a slow upstream route, to hopefully discover any app breakage. ] Signed-off-by:
-
Tejun Heo authored
commit bb969619 upstream. sata_inic162x never reached a state where it's reliable enough for production use and data corruption is a relatively common occurrence. Make the driver generate warning about the issues and mark the Kconfig option as experimental. If the situation doesn't improve, we'd be better off making it depend on CONFIG_BROKEN. Let's wait for several cycles and see if the kernel message draws any attention. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Martin Braure de Calignon <braurede@free.fr> Reported-by:
-
Wanpeng Li authored
commit cea27eb2 upstream. The logic for the memory-remove code fails to correctly account the Total High Memory when a memory block which contains High Memory is offlined as shown in the example below. The following patch fixes it. Before logic memory remove: MemTotal: 7603740 kB MemFree: 6329612 kB Buffers: 94352 kB Cached: 872008 kB SwapCached: 0 kB Active: 626932 kB Inactive: 519216 kB Active(anon): 180776 kB Inactive(anon): 222944 kB Active(file): 446156 kB Inactive(file): 296272 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 7294672 kB HighFree: 5704696 kB LowTotal: 309068 kB LowFree: 624916 kB After logic memory remove: MemTotal: 7079452 kB MemFree: 5805976 kB Buffers: 94372 kB Cached: 872000 kB SwapCached: 0 kB Active: 626936 kB Inactive: 519236 kB Active(anon): 180780 kB Inactive(anon): 222944 kB Active(file): 446156 kB Inactive(file): 296292 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 7294672 kB HighFree: 5181024 kB LowTotal: 4294752076 kB LowFree: 624952 kB [mhocko@suse.cz: fix CONFIG_HIGHMEM=n build] Signed-off-by:
Wanpeng Li <liwanp@linux.vnet.ibm.com> Reviewed-by:
Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by:
Zhouping Liu <zliu@redhat.com> Signed-off-by:
-
Ben Hutchings authored
commit b51c3427 ('ifb: fix rcu_sched self-detected stalls', commit 440d57bc upstream) added a call to cond_resched(), which is declared in '#include <linux/sched.h>'. In Linux 3.2.y that header is included indirectly in some but not all configurations, so add a direct #include. Reported-by:
Teck Choon Giam <giamteckchoon@gmail.com> Signed-off-by:
-
- 02 Aug, 2013 8 commits
-
-
Ben Hutchings authored
-
William Gulland authored
commit 2c7b871b upstream. Control transfers have both IN and OUT (or SETUP) packets, so when clearing TT buffers for a control transfer it's necessary to send two HUB_CLEAR_TT_BUFFER requests to the hub. Signed-off-by:
William Gulland <wgulland@google.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Johan Hovold authored
commit 5f8a2e68 upstream. Allocated urbs and buffers were never freed on errors in open. Signed-off-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
-
Enrico Mioso authored
commit 878c69aa upstream. Some (very few) early devices like mine, where not exposting a proper CDC descriptor. This was fixed with an immediate firmware update from the vendor, and pre-installed on newer devices. So actual devices can be driven by cdc_acm.c + cdc_ether.c. Signed-off-by:
Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by:
-
Dan Williams authored
commit 4cf76df0 upstream. Speaks AT on interfaces 5 (command & PPP) and 3 (secondary), other interface protocols are unknown. Signed-off-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
-
Enrico Mioso authored
commit 3d1a69e7 upstream. Prevent the option driver from binding itself to the QMI/WWAN interface, making it unusable by the proper driver. Signed-off-by:
-
Oleksij Rempel authored
commit d66eaf9f upstream. in some cases where device is attched to xhci port and do not responding, for example ath9k_htc with stalled firmware, kernel will crash on ring_doorbell_for_active_rings. This patch check if pointer exist before it is used. This patch should be backported to kernels as old as 2.6.35, that contain the commit e9df17eb "USB: xhci: Correct assumptions about number of rings per endpoint" Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
-
George Cherian authored
commit 07f3cb7c upstream. Xhci controllers with hci_version > 0.96 gives spurious success events on short packet completion. During webcam capture the "ERROR Transfer event TRB DMA ptr not part of current TD" was observed. The same application works fine with synopsis controllers hci_version 0.96. The same issue is seen with Intel Pantherpoint xhci controller. So enabling this quirk in xhci_gen_setup if controller verion is greater than 0.96. For xhci-pci move the quirk to much generic place xhci_gen_setup. Note from Sarah: The xHCI 1.0 spec changed how hardware handles short packets. The HW will notify SW of the TRB where the short packet occurred, and it will also give a successful status for the last TRB in a TD (the one with the IOC flag set). On the second successful status, that warning will be triggered in the driver. Software is now supposed to not assume the TD is not completed until it gets that last successful status. That means we have a slight race condition, although it should have little practical impact. This patch papers over that issue. It's on my long-term to-do list to fix this race condition, but it is a much more involved patch that will probably be too big for stable. This patch is needed for stable to avoid serious log spam. This patch should be backported to kernels as old as 3.0, that contain the commit ad808333 "Intel xhci: Ignore spurious successful event." The patch will have to be modified for kernels older than 3.2, since that kernel added the xhci_gen_setup function for xhci platform devices. The correct conflict resolution for kernels older than 3.2 is to set XHCI_SPURIOUS_SUCCESS in xhci_pci_quirks for all xHCI 1.0 hosts. Signed-off-by:
George Cherian <george.cherian@ti.com> Signed-off-by:
-
