- 08 Feb, 2017 4 commits
-
-
Tvrtko Ursulin authored
Currently to establish whether GuC firmware has been loaded or submission enabled (default DRM log level), one has to detect the absence of the message saying that the load has been skipped and infer the opposite. It is better to log the fact GuC firmware has been loaded and/or submission enabled explicitly to avoid any guesswork when looking at the logs. v2: * Log message polish. (Chris) * Future proof by reporting found firmware version. (Michal) Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> (v1) Link: http://patchwork.freedesktop.org/patch/msgid/1486457425-32548-1-git-send-email-tvrtko.ursulin@linux.intel.com
-
Joonas Lahtinen authored
Macro seems to do exactly the same thing. Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Joonas Lahtinen authored
"BIT(max) - 1" will overflow when max = 32, and GCC will complain. We already have GENMASK for generating the mask, use it! v2: Majestic off by one spotted (Chris) Signed-off-by:
-
Michał Winiarski authored
We're using non-canonical addresses in drm_mm, and we're making sure that userspace is using canonical addressing - both in case of softpin (verifying incoming offset) and when relocating (converting to canonical when updating offset returned to userspace). Unfortunately when considering the need for relocations, we're comparing offset from userspace (in canonical form) with drm_mm node (in non-canonical form), and as a result, we end up always relocating if our offsets are in the "problematic" range. Let's always convert the offsets to avoid the performance impact of relocations. Fixes: a5f0edf6 ("drm/i915: Avoid writing relocs with addresses in non-canonical form") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Reported-by:
Michał Pyrzowski <michal.pyrzowski@intel.com> Signed-off-by:
Michał Winiarski <michal.winiarski@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170207195559.18798-1-michal.winiarski@intel.comReviewed-by:
-
- 07 Feb, 2017 3 commits
-
-
Chris Wilson authored
Following a reset, the context and page directory registers are lost. However, the queue of requests that we resubmit after the reset may depend upon them - the registers are restored from a context image, but that restore may be inhibited and may simply be absent from the request if it was in the middle of a sequence using the same context. If we prime the CCID/PD registers with the first request in the queue (even for the hung request), we prevent invalid memory access for the following requests (and continually hung engines). v2: Magic BIT(8), reserved for future use but still appears unused. v3: Some commentary on handling innocent vs guilty requests v4: Add a wait for PD_BASE fetch. The reload appears to be instant on my Ivybridge, but this bit probably exists for a reason. Fixes: 821ed7df ("drm/i915: Update reset path to fix incomplete requests") Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com>
-
Arthur Heymans authored
This is according to Mobile Intel
® 945 Express Chipset Family datasheet. Signed-off-by:Arthur Heymans <arthur@aheymans.xyz> Link: http://patchwork.freedesktop.org/patch/msgid/20170131235026.26003-1-arthur@aheymans.xyzReviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Chris Wilson authored
The goal of the WARN was to catch when we are still actively using the fence as we go into the runtime suspend. However, the reg->pin_count is too coarse as it does not distinguish between exclusive ownership of the fence register from activity. I've not improved on the WARN, nor have we captured this WARN in an exact igt, but it is showing up regularly in the wild: [ 1915.935332] WARNING: CPU: 1 PID: 10861 at drivers/gpu/drm/i915/i915_gem.c:2022 i915_gem_runtime_suspend+0x116/0x130 [i915] [ 1915.935383] WARN_ON(reg->pin_count)[ 1915.935399] Modules linked in: snd_hda_intel i915 drm_kms_helper vgem netconsole scsi_transport_iscsi fuse vfat fat x86_pkg_temp_thermal coretemp intel_cstate intel_uncore snd_hda_codec_hdmi snd_hda_codec_generic snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mei_me mei serio_raw intel_rapl_perf intel_pch_thermal soundcore wmi acpi_pad i2c_algo_bit syscopyarea sysfillrect sysimgblt fb_sys_fops drm r8169 mii video [last unloaded: drm_kms_helper] [ 1915.935785] CPU: 1 PID: 10861 Comm: kworker/1:0 Tainted: G U W 4.9.0-rc5+ #170 [ 1915.935799] Hardware name: LENOVO 80MX/Lenovo E31-80, BIOS DCCN34WW(V2.03) 12/01/2015 [ 1915.935822] Workqueue: pm pm_runtime_work [ 1915.935845] ffffc900044fbbf0 ffffffffac3220bc ffffc900044fbc40 0000000000000000 [ 1915.935890] ffffc900044fbc30 ffffffffac059bcb 000007e6044fbc60 ffff8801626e3198 [ 1915.935937] ffff8801626e0000 0000000000000002 ffffffffc05e5d4e 0000000000000000 [ 1915.935985] Call Trace: [ 1915.936013] [<ffffffffac3220bc>] dump_stack+0x4f/0x73 [ 1915.936038] [<ffffffffac059bcb>] __warn+0xcb/0xf0 [ 1915.936060] [<ffffffffac059c4f>] warn_slowpath_fmt+0x5f/0x80 [ 1915.936158] [<ffffffffc052d916>] i915_gem_runtime_suspend+0x116/0x130 [i915] [ 1915.936251] [<ffffffffc04f1c74>] intel_runtime_suspend+0x64/0x280 [i915] [ 1915.936277] [<ffffffffac0926f1>] ? dequeue_entity+0x241/0xbc0 [ 1915.936298] [<ffffffffac36bb85>] pci_pm_runtime_suspend+0x55/0x180 [ 1915.936317] [<ffffffffac36bb30>] ? pci_pm_runtime_resume+0xa0/0xa0 [ 1915.936339] [<ffffffffac4514e2>] __rpm_callback+0x32/0x70 [ 1915.936356] [<ffffffffac451544>] rpm_callback+0x24/0x80 [ 1915.936375] [<ffffffffac36bb30>] ? pci_pm_runtime_resume+0xa0/0xa0 [ 1915.936392] [<ffffffffac45222d>] rpm_suspend+0x12d/0x680 [ 1915.936415] [<ffffffffac69f6d7>] ? _raw_spin_unlock_irq+0x17/0x30 [ 1915.936435] [<ffffffffac0810b8>] ? finish_task_switch+0x88/0x220 [ 1915.936455] [<ffffffffac4534bf>] pm_runtime_work+0x6f/0xb0 [ 1915.936477] [<ffffffffac074353>] process_one_work+0x1f3/0x4d0 [ 1915.936501] [<ffffffffac074678>] worker_thread+0x48/0x4e0 [ 1915.936523] [<ffffffffac074630>] ? process_one_work+0x4d0/0x4d0 [ 1915.936542] [<ffffffffac074630>] ? process_one_work+0x4d0/0x4d0 [ 1915.936559] [<ffffffffac07a2c9>] kthread+0xd9/0xf0 [ 1915.936580] [<ffffffffac07a1f0>] ? kthread_park+0x60/0x60 [ 1915.936600] [<ffffffffac69fe62>] ret_from_fork+0x22/0x30 In the case the register is pinned, it should be present and we will need to invalidate them to be restored upon resume as we cannot expect the owner of the pin to call get_fence prior to use after resume. Fixes: 7c108fd8 ("drm/i915: Move fence cancellation to runtime suspend") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98804Reported-by:
Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Signed-off-by:
-
- 06 Feb, 2017 18 commits
-
-
Chris Wilson authored
Alongside the hw capabilities, it is useful to know which of those have been overridden by the user setting module parameters. v2: Use __always_inline and BUILD_BUG magic Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
-
Chris Wilson authored
They include useful material such as what mode the VM address space is running in, what submission mode, extra quirks, etc. v2: Undef the right macro, use type specific pretty printers v3: Use strcmp(TYPENAME) rather than creating per-type pretty printers v4: Use __always_inline to force GCC to eliminate the calls to strcmp and generate the right call to seq_printf for each parameter. v5: With the strcmp elimination, we can now use BUILD_BUG to ensure there are no unhandled types, also use __builtin_strcmp to make it look even more magic. Signed-off-by:
-
Chris Wilson authored
The alpha_support module option can only take one of two values, so assign it to a boolean type. The only advantage is in pretty printing via /sys/module/i915/parameters/alpha_support and elsewhere. Signed-off-by:
-
Chris Wilson authored
I want to print the struct from the error state and so would like to use the existing struct definition as the template ala DEV_INFO* v2: Use MEMBER() rather than p(). Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170206213608.31328-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
In commit 86aa7e76 ("drm/i915: Assert that the context-switch completion matches our context") I added a read to the irq tasklet handler that compared the on-chip status with that of our sw tracking, using an unguarded read of the request pointer to get the context and beyond. Whilst we hold a reference to the request, we do not hold anything on the context and if we are unlucky it may be reaped from a second thread retiring the request (since it may retire the request as soon as the breadcrumb is complete, even before we finish processing the context switch) as we try to read from the context pointer. Avoid the racy read from underneath the request by storing the expected result in the execlist_port[]. v2: Include commentary about port[].request being unprotected. Fixes: 86aa7e76 ("drm/i915: Assert that the context-switch completion matches our context") Reported-by:
-
Chris Wilson authored
It is required that the caller declare the exact number of dwords they wish to write into the ring. This is required for two reasons, we need to allocate sufficient space for the entire command packet and we need to be sure that the contents are completely written to avoid executing stale data. The current interface requires for any bug to be caught in review, the reader has to carefully count the number of intel_ring_emit() between intel_ring_begin() and intel_ring_advance(). If we record the end of the packet of each intel_ring_begin() we can also have CI check for us. Signed-off-by:
-
Zhi Wang authored
execlist_update_context() will try to update PDPs in a context before a ELSP submission only for full PPGTT mode, while PDPs was populated during context initialization. Now the latter code path is removed. Let execlist_update_context() also cover !FULL_PPGTT mode. Fixes: 34869776 ("drm/i915: check ppgtt validity when init reg state") Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhiyuan Lv <zhiyuan.lv@intel.com> Signed-off-by:
Zhi Wang <zhi.a.wang@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1486377436-15380-1-git-send-email-zhi.a.wang@intel.comReviewed-by:
-
Imre Deak authored
To be consistent with the recent change to enable hotplug detection early on GEN9 platforms do the same on all non-GMCH platforms starting from GEN5. On GMCH platforms enabling detection without interrupts isn't trivial, since AUX and HPD have a shared interrupt line. It could be done there too by using a SW interrupt mask, but I punt on that for now. Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Shashank Sharma <shashank.sharma@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1485509961-9010-5-git-send-email-imre.deak@intel.com
-
Imre Deak authored
This effectively reverts commit 489375c8 Author: Imre Deak <imre.deak@intel.com> Date: Mon Oct 24 19:33:31 2016 +0300 drm/i915/lspcon: Add workaround for resuming in PCON mode The workaround was added without considering that HPD is low during the failed AUX transfers the WA fixed. Since the previous patch we wait for HPD to get asserted. My tests also show that this happens _after_ the DPCD reads start to return correct values. This suggests that we don't need this WA any more, let's try to remove it to reduce the clutter. Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Imre Deak authored
During system resume time initialization the HPD level on LSPCON ports can stay low for an extended amount of time, leading to failed AUX transfers and LSPCON initialization. Fix this by waiting for HPD to get asserted. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99178 Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: <stable@vger.kernel.org> # v4.9+ Signed-off-by:
-
Imre Deak authored
For LSPCON resume time initialization we need to sample the corresponding pin's HPD level, but this is only available when HPD detection is enabled. Currently we enable detection only when enabling HPD interrupts which is too late, so bring the enabling of detection earlier. This is needed by the next patch. Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: <stable@vger.kernel.org> # v4.9+ Signed-off-by:
-
Chris Wilson authored
As we now mark the reserved hole (drm_mm.head_node) with the special UNEVICTABLE color, we can use the page coloring to avoid prefetching of the CS beyond the end of the GTT. Signed-off-by:
Matthew Auld <matthew.auld@intel.com>
-
Chris Wilson authored
The drm_mm range manager (within i915_address_space) uses a special drm_mm_node that excludes the unavailable range (beyond the end of the drm_mm). However, we play games with the global GTT to use the head_node to exclude the tail page but tell ourselves that the whole range is available. This causes an issue when we try to evict using the full range of the global GTT which is wider than the drm_mm, resulting in complete confusion and catastrophe. One way to resolve this would be to use a reserved node to exclude the guard page, or we can treat the drm_mm's head_node as our guard page and assign it the appropriate colour. Signed-off-by:
-
Chris Wilson authored
I incorrectly converted the exclusion of the last 4096 bytes (that avoids any potential prefetching past the end of the GTT) to PAGE_SIZE and not to I915_GTT_PAGE_SIZE as it should be. Signed-off-by:
-
Chris Wilson authored
After resetting, show the requests that each engine restarts from in the debug log. Signed-off-by:
-
Chris Wilson authored
If we have any residual freed atomic state from earlier commits, flush the freed list after performing the current modeset. This prevents the freed list from ever-growing if userspace manages to starve the kernel threads (i.e. we are never able to run our free state worker and eventually the system may even oom). Fixes: eb955eee ("drm/i915: Move atomic state free from out of fence release") Testcase: igt/kms_cursor/legacy/all-pipes-single-bo Reported-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
Daniel Vetter authored
Signed-off-by: -
Daniele Ceraolo Spurio authored
The only difference for the more recent of those macros is the version of the *_reg_<read/write>_fw_domains function. Passing the function prefix in allows us to re-use the same macro to generate functions for different GENs and will make it easier to add new accessors in the future Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1486171409-21542-1-git-send-email-daniele.ceraolospurio@intel.comReviewed-by:
-
- 04 Feb, 2017 1 commit
-
-
Daniele Ceraolo Spurio authored
Fences are creted/checked before the pm ref is taken, so if we jump to pre_mutex_err we will uncorrectly call intel_runtime_pm_put. v2: Massage unwind error paths Fixes: fec0445c (drm/i915: Support explicit fencing for execbuf) Testcase: igt/gem_exec_params Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
- 03 Feb, 2017 6 commits
-
-
Chris Wilson authored
We now have partial VMA support to break large objects into fence sized regions and no longer have to restrict tiling to small objects on gen2/3 Signed-off-by:
-
Chris Wilson authored
The current tail breaks the pattern of if (check) return false, which can catch the reader out. If we move the gen2/3 power-of-two test into the earlier gen2/3 branch, we can eliminate the contrary tail. Suggested-by:
Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by:
-
Chris Wilson authored
In commit 957870f9 ("drm/i915: Split out i915_gem_object_set_tiling()"), I swapped an alignment check for IS_ALIGNED and in the process removed the less-than check. That check turns out to be important as it was the only rejection for stride == 0. Tvrtko did spot it, but I was overconfident in the IS_ALIGNED() conversion. Fixes: 957870f9 ("drm/i915: Split out i915_gem_object_set_tiling()") Testcase: igt/gem_tiling_max_stride Signed-off-by:
-
Lee, Shawn C authored
Add the missing INTEL_OUTPUT_DP_MST case in bxt_get_dpll() to correctly initialize the crtc_state and port plls when link training a DP MST monitor on BXT/APL devices. Fixes: a277ca7d ("drm/i915: Split bxt_ddi_pll_select()") Bugs: https://bugs.freedesktop.org/show_bug.cgi?id=99572Reviewed-by:
Cooper Chiou <cooper.chiou@intel.com> Reviewed-by:
Gary C Wang <gary.c.wang@intel.com> Reviewed-by:
Ciobanu, Nathan D <nathan.d.ciobanu@intel.com> Reviewed-by:
Herbert, Marc <marc.herbert@intel.com> Reviewed-by:
Bride, Jim <jim.bride@intel.com> Reviewed-by:
Navare, Manasi D <manasi.d.navare@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: <stable@vger.kernel.org> # v4.9+ Signed-off-by:
Lee, Shawn C <shawn.c.lee@intel.com> Signed-off-by:
-
Matthew Auld authored
Now that we have selftests in place exercising truly huge allocations we will start to hit the 512GB warning, so now seems like a good time to remove this user-triggerable WARN. Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Chris Wilson authored
If we fail to dma-map the object, the most common cause is lack of space inside the SW-IOTLB due to fragmentation. If we recreate the_sg_table using segments of PAGE_SIZE (and single page allocations), we may succeed in remapping the scatterlist. First became a significant problem for the mock selftests after commit 5584f1b1 ("drm/i915: fix i915 running as dom0 under Xen") increased the max_order. Fixes: 920cf419 ("drm/i915: Introduce an internal allocator for disposable private objects") Fixes: 5584f1b1 ("drm/i915: fix i915 running as dom0 under Xen") Signed-off-by:
-
- 02 Feb, 2017 3 commits
-
-
Jani Nikula authored
Apparently there are machines out there with Skylake CPU and KabyPoint PCH. Judging from our driver code, there doesn't seem to be any code paths that would do anything different between SunrisePoint and KabyPoint PCHs, so it would seem okay to accept the combo without warnings. Fixes: 22dea0be ("drm/i915: Introduce Kabypoint PCH for Kabylake H/DT.") References: https://lists.freedesktop.org/archives/intel-gfx/2017-February/118611.htmlReported-by:
Rainer Koenig <Rainer.Koenig@ts.fujitsu.com> Cc: Rainer Koenig <Rainer.Koenig@ts.fujitsu.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: <stable@vger.kernel.org> # v4.8+ Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Chris Wilson authored
Build the struct drm_mm selftests so that we can trivially run them within our CI. "Enable debug, become developer." - Joonas Lahtinen Signed-off-by:
-
Juergen Gross authored
Commit 920cf419 ("drm/i915: Introduce an internal allocator for disposable private objects") introduced a regression for the kernel running as Xen dom0: when switching to graphics mode a GPU HANG occurred. Reason seems to be a missing adaption similar to that done in commit 7453c549 ("swiotlb: Export swiotlb_max_segment to users") to i915_gem_object_get_pages_internal(). So limit the maximum page order to be used according to the maximum swiotlb segment size instead to the complete swiotlb size. Fixes: 920cf419 ("drm/i915: Introduce an internal allocator for disposable private objects") Signed-off-by:
Juergen Gross <jgross@suse.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170202094711.939-1-jgross@suse.com Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.10-rc1+ Reviewed-by:
-
- 01 Feb, 2017 5 commits
-
-
Maarten Lankhorst authored
If the crtc was brought up with audio before the driver loads, then crtc_disable will remove a refcount to audio that doesn't exist before. Fortunately we already set power domains on readout, so we can just add the power domain handling to get_crtc_power_domains, which will update the power domains correctly in all cases. This was found when testing module reload on CI with the crtc enabled, which resulted in the following warn after module reload + modeset: [ 24.197041] ------------[ cut here ]------------ [ 24.197075] WARNING: CPU: 0 PID: 99 at drivers/gpu/drm/i915/intel_runtime_pm.c:1790 intel_display_power_put+0x134/0x140 [i915] [ 24.197076] Use count on domain AUDIO is already zero [ 24.197098] CPU: 0 PID: 99 Comm: kworker/u8:2 Not tainted 4.9.0-CI-Trybot_393+ #1 [ 24.197099] Hardware name: /NUC6i5SYB, BIOS SYSKLi35.86A.0042.2016.0409.1246 04/09/2016 [ 24.197102] Workqueue: events_unbound async_run_entry_fn [ 24.197105] ffffc900003c7688 ffffffff81435b35 ffffc900003c76d8 0000000000000000 [ 24.197107] ffffc900003c76c8 ffffffff8107e4d6 000006fe5dc36f28 ffff88025dc30054 [ 24.197109] ffff88025dc36f28 ffff88025dc30000 ffff88025dc30000 0000000000000015 [ 24.197110] Call Trace: [ 24.197113] [<ffffffff81435b35>] dump_stack+0x67/0x92 [ 24.197116] [<ffffffff8107e4d6>] __warn+0xc6/0xe0 [ 24.197118] [<ffffffff8107e53a>] warn_slowpath_fmt+0x4a/0x50 [ 24.197149] [<ffffffffa039b4b4>] intel_display_power_put+0x134/0x140 [i915] [ 24.197187] [<ffffffffa04217dd>] intel_disable_ddi+0x4d/0x80 [i915] [ 24.197223] [<ffffffffa03f388f>] intel_encoders_disable.isra.74+0x7f/0x90 [i915] [ 24.197257] [<ffffffffa03f6c05>] haswell_crtc_disable+0x55/0x170 [i915] [ 24.197292] [<ffffffffa03fec88>] intel_atomic_commit_tail+0x108/0xfd0 [i915] [ 24.197295] [<ffffffff810d47c6>] ? __lock_is_held+0x66/0x90 [ 24.197330] [<ffffffffa03fff79>] intel_atomic_commit+0x429/0x560 [i915] [ 24.197332] [<ffffffff81570186>] ?drm_atomic_add_affected_connectors+0x56/0xf0 [ 24.197334] [<ffffffff8156f726>] drm_atomic_commit+0x46/0x50 [ 24.197336] [<ffffffff81553f87>] restore_fbdev_mode+0x147/0x270 [ 24.197337] [<ffffffff81555bee>] drm_fb_helper_restore_fbdev_mode_unlocked+0x2e/0x70 [ 24.197339] [<ffffffff81555aa8>] drm_fb_helper_set_par+0x28/0x50 [ 24.197374] [<ffffffffa041c7d3>] intel_fbdev_set_par+0x13/0x70 [i915] [ 24.197376] [<ffffffff8149e07a>] fbcon_init+0x57a/0x600 [ 24.197379] [<ffffffff81514b71>] visual_init+0xd1/0x130 [ 24.197381] [<ffffffff8151603c>] do_bind_con_driver+0x1bc/0x3a0 [ 24.197384] [<ffffffff81516521>] do_take_over_console+0x111/0x180 [ 24.197386] [<ffffffff8149e152>] do_fbcon_takeover+0x52/0xb0 [ 24.197387] [<ffffffff814a12c3>] fbcon_event_notify+0x723/0x850 [ 24.197390] [<ffffffff810a4830>] ?__blocking_notifier_call_chain+0x30/0x70 [ 24.197392] [<ffffffff810a44a4>] notifier_call_chain+0x34/0xa0 [ 24.197394] [<ffffffff810a4848>] __blocking_notifier_call_chain+0x48/0x70 [ 24.197397] [<ffffffff810a4881>] blocking_notifier_call_chain+0x11/0x20 [ 24.197398] [<ffffffff814a4556>] fb_notifier_call_chain+0x16/0x20 [ 24.197400] [<ffffffff814a678c>] register_framebuffer+0x24c/0x330 [ 24.197402] [<ffffffff815558d9>] drm_fb_helper_initial_config+0x219/0x3c0 [ 24.197436] [<ffffffffa041d373>] intel_fbdev_initial_config+0x13/0x30 [i915] [ 24.197438] [<ffffffff810a5d44>] async_run_entry_fn+0x34/0x140 [ 24.197440] [<ffffffff8109c26c>] process_one_work+0x1ec/0x6b0 [ 24.197442] [<ffffffff8109c1e6>] ? process_one_work+0x166/0x6b0 [ 24.197445] [<ffffffff8109c779>] worker_thread+0x49/0x490 [ 24.197447] [<ffffffff8109c730>] ? process_one_work+0x6b0/0x6b0 [ 24.197448] [<ffffffff810a2a9b>] kthread+0xeb/0x110 [ 24.197451] [<ffffffff810a29b0>] ? kthread_park+0x60/0x60 [ 24.197453] [<ffffffff818241a7>] ret_from_fork+0x27/0x40 [ 24.197476] ---[ end trace bda64b683b8e8162 ]--- Signed-off-by:
-
Maarten Lankhorst authored
We may keep the crtc's enabled when userspace unsets all framebuffers but keeps the crtc active. This exposes a WARN in fbc_global disable, and a lot of bugs in our hardware readout code. Solve this by disabling all crtc's for now. Changes since v1: - Use lock_all_ctx instead of lock_all. Signed-off-by:
-
Chris Wilson authored
Primarily this serves as a sanity check that the bit has been cleared before we suspend (and hasn't reappeared after resume). Signed-off-by:
-
Chris Wilson authored
As we now flag when the GPU signals a context-switch and do not read the status register before we see that signal, we do not have to ensure that it is cleared upon reset (and can leave it to the GPU to reset it from the power context). Signed-off-by:
-
Uma Shankar authored
Enable MIPI IO WA for BXT DSI as per bspec and program the DSI regulators. v2: Moved IO enable to pre-enable as per Mika's review comments. Also reused the existing register definition for BXT_P_CR_GT_DISP_PWRON. v3: Added Programming the DSI regulators as per disable/enable sequences. v4: Restricting regulator changes to BXT as suggested by Jani/Mika v5: Removed redundant read/modify for regulator register as per Jani's comment. Maintain enable/disable symmetry as per spec. Signed-off-by:
Uma Shankar <uma.shankar@intel.com> Signed-off-by:
Vidya Srinivas <vidya.srinivas@intel.com> Acked-by:
Mika Kahola <mika.kahola@intel.com> Reviewed-by:
-
