- 10 Nov, 2009 1 commit
-
-
Takashi Iwai authored
Add reboot notifier to each codec so that it can do some workarounds needed for reboot. So far, patch_sigmatel.c calls its shutup routine for avoiding noises at reboot on some HP machines. References: Novell bnc#544779 http://bugzilla.novell.com/show_bug.cgi?id=544779Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
- 06 Nov, 2009 2 commits
-
-
Takashi Iwai authored
Some laptops cause annoying clicks or noises at shutdown/reboot since the speaker pin is set still high. Apply the same procedure used for the suspend to avoid such clicks/noises for freeing the codec, too. Signed-off-by: -
Takashi Iwai authored
-
- 05 Nov, 2009 2 commits
-
-
Randy Dunlap authored
Function hp_bseries_system() is always used, outside of CONFIG_ boundaries/controls, so move it. sound/pci/hda/patch_sigmatel.c:5458: error: implicit declaration of function 'hp_bseries_system' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Takashi Iwai authored
-
- 04 Nov, 2009 2 commits
-
-
Daniel Drake authored
The XO-1.5 laptop now has a unique subvendor/subproduct ID, which can be used to automatically select the correct CXT5066 configuration. Signed-off-by:
Daniel Drake <dsd@laptop.org> Signed-off-by:
-
Vitaliy Kulikov authored
This patch enables GPIO to control mute LED indicator on the HP systems with the special string in BIOS and applies it with the correct polarity on HP B-series systems. It also restores configuration of the pin intended as the second Headphone on HP B-series systems but configured as something else in the BIOS to pass MS DTM. Signed-off-by:
Vitaliy Kulikov <Vitaliy.Kulikov@idt.com> Signed-off-by:
-
- 02 Nov, 2009 2 commits
-
-
Takashi Iwai authored
alc_automute_pin() might be called even if any HP pin is defined, and it will result in verbs with NID=0. This patch adds a check for the validity of HP widget before issuing any verbs. Signed-off-by: -
Daniel T Chen authored
BugLink: https://bugs.launchpad.net/bugs/368629 We should use a quirk mask for these Dell Inspiron Mini9s and Vostro A90s, as the model=dell quirk appears to enable audio on them. Signed-off-by:
Daniel T Chen <crimsun@ubuntu.com> Signed-off-by:
-
- 30 Oct, 2009 15 commits
-
-
Takashi Iwai authored
When any codec communication error happens, try to switch to the polling mode first before turning off MSI. MSI gets more stable nowadays, thus we should keep it on as much as possible. Signed-off-by: -
Takashi Iwai authored
Added a proper ifdef CONFIG_SND_DEBUG_VERBOSE to avoid a compile warning: sound/pci/hda/patch_intelhdmi.c:406: warning: ‘hdmi_get_channel_count’ defined but not used Signed-off-by: -
Lydia Wang authored
Add support for VT1818S codec, which is similiar with VT1708S. Signed-off-by:
Lydia Wang <lydiawang@viatech.com.cn> Signed-off-by:
-
peer chen authored
Add the generic device ID for NVIDIA HDA controller. Signed-off-by:
Peer Chen <peerchen@gmail.com> Signed-off-by:
-
Wu Fengguang authored
Signed-off-by:
Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
-
Wu Fengguang authored
Signed-off-by:
-
Wu Fengguang authored
Signed-off-by:
-
Wu Fengguang authored
The Intel IbexPeak HDMI codec supports 2 converters and 3 pins, which requires converting the cvt_nid/pin_nid to arrays. The active pin number (the one connected with a live HDMI monitor/sink) will be dynamically identified on hotplug events. It exports two HDMI devices, so that user space can choose the A/V pipe for sending the audio samples. It's still undefined behavior when there are two active monitors connected and routed to the same audio converter. Signed-off-by:
-
Wu Fengguang authored
No behavior change. Signed-off-by:
-
Wu Fengguang authored
Remove pcm callbacks open/close in favor of the prepare/cleanup. Signed-off-by:
-
Wu Fengguang authored
We'll be managing multiple HDMI audio sources/sinks on our own. So remove multiout dependency from intelhdmi. Signed-off-by:
-
Wu Fengguang authored
No behavior change. Signed-off-by:
-
Wu Fengguang authored
The new Intel HDMI codec supports 2 independant HDMI/DisplayPort pipes. We'll be exporting them as 2 pcm devices. So bump up the allowed number of HDMI devices. Signed-off-by:
-
Wu Fengguang authored
This unifies the code and data structure, and makes it easy to add more HDMI devices. Signed-off-by:
-
Wu Fengguang authored
An earlier patch merely adds id for 0x80862804. It has 2/3 cvt/pin nodes and shall be tied to the IbexPeak handler. Signed-off-by:
-
- 14 Oct, 2009 2 commits
-
-
Takashi Iwai authored
The ALC662/663 parser calls wrongly alc880_auto_create_input_ctls() to check the capture source selections. This should be alc882, instead. Reference: Novell bnc#546918 http://bugzilla.novell.com/show_bug.cgi?id=546918Signed-off-by:
-
Logan Li authored
48 kHz limit is for slightly better stability, and sample rates other than 48k (like 96k/192k) are for better sound quality. We choose better quality, so remove the 48k limit. Signed-off-by:
Logan Li <loganli@viatech.com.cn> Signed-off-by:
-
- 13 Oct, 2009 4 commits
-
-
Takashi Iwai authored
In the commit f0613d57 ALSA: hda - Add full rates/formats support for Nvidia HDMI the flag LIMITIED_RATE_FMT_SUPPORT was set as default, as I forgot to clear before commit. Let's enable all formats/rates as default. Signed-off-by:
-
Takashi Iwai authored
The volume-knob widget needs to be set with 0x7f instead of 0xff for Dell laptops with STAC9228 codec, too, like the previous commit. Reference: Novell bnc#545013 http://bugzilla.novell.com/show_bug.cgi?id=545013Signed-off-by:
-
Takashi Iwai authored
On FSC laptops, the sound gets muted gradually when the volume is chnaged. This is due to the wrong volume-knob widget setup. The delta bit (bit 7) shouldn't be set for these devices. This patch adds a new quirk to set the value 0x7f to the widget 0x24 instead of 0xff. Reference: Novell bnc#546006 http://bugzilla.novell.com/show_bug.cgi?id=546006Signed-off-by:
-
Takashi Iwai authored
ALC861-VD lenovo model causes overflow of spec->init_verbs entries due to the recent changes. Simply increase the array size to avoid the overflow. Reported-by:
Luca Tettamanti <kronos.it@gmail.com> Signed-off-by:
-
- 12 Oct, 2009 1 commit
-
-
Stephen Rothwell authored
Fixes: sound/pci/hda/patch_via.c: In function 'patch_vt1718S': sound/pci/hda/patch_via.c:4951: error: expected expression before 'return' sound/pci/hda/patch_via.c: In function 'patch_vt1716S': sound/pci/hda/patch_via.c:5441: error: expected expression before 'return' sound/pci/hda/patch_via.c: In function 'patch_vt2002P': sound/pci/hda/patch_via.c:5794: error: expected expression before 'return' sound/pci/hda/patch_via.c: In function 'patch_vt1812': sound/pci/hda/patch_via.c:6148: error: expected expression before 'return' Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
- 11 Oct, 2009 9 commits
-
-
Lydia Wang authored
Signed-off-by:
-
Lydia Wang authored
Signed-off-by:
-
Lydia Wang authored
According to customer request, hp should be default to redirected mode, i.e. PW4 connect select default to to MW0. Signed-off-by:
-
Lydia Wang authored
To via_control_templates[]. Signed-off-by:
-
Lydia Wang authored
Signed-off-by:
-
Lydia Wang authored
Signed-off-by:
-
Lydia Wang authored
Signed-off-by:
-
Lydia Wang authored
Signed-off-by:
-
Lydia Wang authored
Signed-off-by:
-
