In s390, CI reported that the sock_iter_batch selftest
hits this error very often:

2024-01-26T16:56:49.3091804Z Bind /proc/self/ns/net -> /run/netns/sock_iter_batch_netns failed: No such file or directory
2024-01-26T16:56:49.3149524Z Cannot remove namespace file "/run/netns/sock_iter_batch_netns": No such file or directory
2024-01-26T16:56:49.3772213Z test_sock_iter_batch:FAIL:ip netns add sock_iter_batch_netns unexpected error: 256 (errno 0)

It happens very often in s390 but Manu also noticed it happens very
sparsely in other arch also.

It turns out the default dash shell does not recognize "&>"
as a redirection operator, so the command went to the background.
In the sock_iter_batch selftest, the "ip netns delete" went
into background and then race with the following "ip netns add"
command.

This patch replaces the "&> /dev/null" usage with ">/dev/null 2>&1"
and does this redirection in the SYS_NOFAIL macro instead of doing
it individually by its caller. The SYS_NOFAIL callers do not care
about failure, so it is no harm to do this redirection even if
some of the existing callers do not redirect to /dev/null now.

It touches different test files, so I skipped the Fixes tags
in this patch. Some of the changed tests do not use "&>"
but they use the SYS_NOFAIL, so these tests are also
changed to avoid doing its own redirection because
SYS_NOFAIL does it internally now.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240127025017.950825-1-martin.lau@linux.devSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Now that bpf and bpf-next trees converged and we don't run the risk of
merge conflicts, move btf_validate_prog_ctx_type() into its most logical
place inside the main logic loop.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240125205510.3642094-4-andrii@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Adjust PERF_EVENT type enforcement around __arg_ctx to match exactly
what kernel is doing.

Fixes: 76ec90a9 ("libbpf: warn on unexpected __arg_ctx type when rewriting BTF")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240125205510.3642094-3-andrii@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Now that feature detection code is in bpf-next tree, integrate __arg_ctx
kernel-side support into kernel_supports() framework.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240125205510.3642094-2-andrii@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

For 64-bit immediate instruction, 'BPF_IMM | BPF_DW | BPF_LD' and
src_reg=[0-6], the current documentation describes the 64-bit
immediate is constructed by:

  imm64 = (next_imm << 32) | imm

But actually imm64 is only used when src_reg=0. For all other
variants (src_reg != 0), 'imm' and 'next_imm' have separate special
encoding requirement and imm64 cannot be easily used to describe
instruction semantics.

This patch clarifies that 64-bit immediate instructions use
two 32-bit immediate values instead of a 64-bit immediate value,
so later describing individual 64-bit immediate instructions
becomes less confusing.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Dave Thaler <dthaler1968@gmail.com>
Link: https://lore.kernel.org/bpf/20240127194629.737589-1-yonghong.song@linux.dev

It seems that the field "mod" in struct bpf_trampoline is not used
anywhere after the commit 31bf1dbc ("bpf: Fix attaching
fentry/fexit/fmod_ret/lsm to modules"). So we can just remove it now.

Fixes: 31bf1dbc ("bpf: Fix attaching fentry/fexit/fmod_ret/lsm to modules")
Signed-off-by: Menglong Dong <dongmenglong.8@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240128055443.413291-1-dongmenglong.8@bytedance.com

bpf_testmod_exit() does not need to have a return value (given the void),
so this patch drops this useless 'return' in it.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/5765b287ea088f0c820f2a834faf9b20fb2f8215.1706442113.git.tanggeliang@kylinos.cn

Optimize bswap instructions by rev8 Zbb instruction conbined with srli
instruction. And Optimize 16-bit zero-extension with Zbb support.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20240115131235.2914289-7-pulehui@huaweicloud.com

Add 8-bit and 16-bit sign-extention wraper with Zbb support to optimize
sign-extension mov instructions.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20240115131235.2914289-6-pulehui@huaweicloud.com

Add necessary Zbb instructions introduced by [0] to reduce code size and
improve performance of RV64 JIT. Meanwhile, a runtime deteted helper is
added to check whether the CPU supports Zbb instructions.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://github.com/riscv/riscv-bitmanip/releases/download/1.0.0/bitmanip-1.0.0-38-g865e7a7.pdf [0]
Link: https://lore.kernel.org/bpf/20240115131235.2914289-5-pulehui@huaweicloud.com

There are many extension helpers in the current branch instructions, and
the implementation is a bit complicated. We simplify this logic through
two simple extension helpers with alternate register.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20240115131235.2914289-4-pulehui@huaweicloud.com

For code unification, add emit_zextw wrapper to unify all the 32-bit
zero-extension operations.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20240115131235.2914289-3-pulehui@huaweicloud.com

For code unification, add emit_sextw wrapper to unify all the 32-bit
sign-extension operations.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20240115131235.2914289-2-pulehui@huaweicloud.com

Android implementation of libc errors out with -EINVAL in faccessat() if
passed AT_EACCESS ([0]), this leads to ridiculous issue with libbpf
refusing to load /sys/kernel/btf/vmlinux on Androids ([1]). Fix by
detecting Android and redefining AT_EACCESS to 0, it's equivalent on
Android.

  [0] https://android.googlesource.com/platform/bionic/+/refs/heads/android13-release/libc/bionic/faccessat.cpp#50
  [1] https://github.com/libbpf/libbpf-bootstrap/issues/250#issuecomment-1911324250

Fixes: 6a4ab886 ("libbpf: Fix the case of running as non-root with capabilities")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240126220944.2497665-1-andrii@kernel.org

musl libc had the basename() prototype in string.h, but this is a
glibc-ism, now they removed the _GNU_SOURCE bits in their devel distro,
Alpine Linux edge:

  https://git.musl-libc.org/cgit/musl/commit/?id=725e17ed6dff4d0cd22487bb64470881e86a92e7

So lets use the POSIX version, the whole rationale is spelled out at:

  https://gitlab.alpinelinux.org/alpine/aports/-/issues/15643Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <olsajiri@gmail.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/lkml/ZZhsPs00TI75RdAr@kernel.org
Link: https://lore.kernel.org/bpf/Zbe3NuOgaupvUcpF@kernel.org

We had to add another synchronize_rcu() in recent fix.
Bite the bullet and add an rcu_head to netdev_name_node,
free from RCU.

Note that name_node does not hold any reference on dev
to which it points, but there must be a synchronize_rcu()
on device removal path, so we should be fine.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The TRF7970A is a SPI device, not I2C.
Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The RENESAS FemtoClock3 Wireless is a high-performance jitter attenuator,
frequency translator, and clock synthesizer. The device is comprised of 3
digital PLLs (DPLL) to track CLKIN inputs and three independent low phase
noise fractional output dividers (FOD) that output low phase noise clocks.

FemtoClock3 supports one Time Synchronization (Time Sync) channel to enable
an external processor to control the phase and frequency of the Time Sync
channel and to take phase measurements using the TDC. Intended applications
are synchronization using the precision time protocol (PTP) and
synchronization with 0.5 Hz and 1 Hz signals from GNSS.
Signed-off-by: Min Li <min.li.xe@renesas.com>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This change is for the PHC devices that can measure the phase offset
between PHC signal and the external signal, such as the 1PPS signal of
GNSS. Reporting PTP_CLOCK_EXTOFF to user space will be piggy-backed to
the existing ptp_extts_event so that application such as ts2phc can
poll the external offset the same way as extts. Hence, ts2phc can use
the offset to achieve the alignment between PHC and the external signal
by the help of either SW or HW filters.
Signed-off-by: Min Li <min.li.xe@renesas.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Breno Leitao says:

====================
Fix MODULE_DESCRIPTION() for net (p3)

There are hundreds of network modules that misses MODULE_DESCRIPTION(),
causing a warning when compiling with W=1. Example:

        WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/arcnet/com90io.o
        WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/arcnet/arc-rimi.o
        WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/arcnet/com20020.o

This part3 of the patchset focus on the missing ethernet drivers, which
is now warning free. This also fixes net/pcs and ieee802154.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to arcnet module.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to ieee802154 modules.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the Lynx, XPCS and LynxI PCS drivers.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the Beckhoff CX5020 EtherCAT Ethernet driver.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the TI CPSW switch module.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the STMicro DWMAC for Altera SOCs.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the Qualcom rmnet and emac drivers.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the SMSC 91x/911x/9420 Ethernet drivers.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the Ocelot SoCs (VSC7514) helpers driver.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the Microchip ENCX24J600 helpers driver.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

As of now, the field TCA_TAPRIO_ATTR_FLAGS is being validated by manually
checking its value, using the function taprio_flags_valid().

With this patch, the field will be validated through the netlink policy
NLA_POLICY_MASK, where the mask is defined by TAPRIO_SUPPORTED_FLAGS.
The mutual exclusivity of the two flags TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD
and TCA_TAPRIO_ATTR_FLAG_TXTIME_ASSIST is still checked manually.

Changes since RFC:
- fixed reversed xmas tree
- use NL_SET_ERR_MSG_MOD() for both invalid configuration

Changes since v1:
- Changed NL_SET_ERR_MSG_MOD to NL_SET_ERR_MSG_ATTR when wrong flags
  issued
- Changed __u32 to u32

Changes since v2:
- Added the missing parameter for NL_SET_ERR_MSG_ATTR (sorry again for
  the noise)
Signed-off-by: Alessandro Marcolini <alessandromarcolini99@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds hardware profile supports for extracting packet headers.
It makes sure that hardware is capabale of extracting ICMP, CPT, ERSPAN
headers.
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiawen Wu says:

====================
Implement irq_domain for TXGBE

Implement irq_domain for the MAC interrupt and handle the sub-irqs.

v3 -> v4:
- fix build error

v2 -> v3:
- use macro defines instead of magic number

v1 -> v2:
- move interrupt codes to txgbe_irq.c
- add txgbe-link-irq to msic irq domain
- remove functions that are not needed
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In the current interrupt controller, the MAC interrupt acts as the
parent interrupt in the GPIO IRQ chip. But when the number of Rx/Tx
ring changes, the PCI IRQ vector needs to be reallocated. Then this
interrupt controller would be corrupted. So use irq_domain structure
to avoid the above problem.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to change the interrupt response structure, there will be a
lot of code added next. Move these interrupt codes to a new file, to
make the codes cleaner.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a note when using esw_port_metadata. The parameter has runtime
mode but setting it does not take effect immediately. Setting it must
happen in legacy mode, and the port metadata takes effects when the
switchdev mode is enabled.

Disable eswitch port metadata::
  $ devlink dev param set pci/0000:06:00.0 name esw_port_metadata value \
    false cmode runtime
Change eswitch mode to switchdev mode where after choosing the metadata value::
  $ devlink dev eswitch set pci/0000:06:00.0 mode switchdev

Note that other mlx5 devlink runtime parameters, esw_multiport and
flow_steering_mode, do not have this limitation.
Signed-off-by: William Tu <witu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since 6.8-rc1, using VTABLE_DEFAULT_ERROR for optional functions
(never called) in #[vtable] is the recommended way.

Note that no functional changes in this patch.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

The relative paths like the following are bothersome and don't work
with `O=` builds:

//! C headers: [`include/linux/phy.h`](../../../../../../../include/linux/phy.h).

This updates such links by using the `srctree`-relative link feature
introduced in 6.8-rc1 like:

//! C headers: [`include/linux/phy.h`](srctree/include/linux/phy.h).
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Oleksij Rempel says:

====================
net: dsa: microchip: implement PHY loopback
====================

Link: https://lore.kernel.org/r/20240124123314.734815-1-o.rempel@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Correct the PHY loopback bit handling in the ksz8_w_phy_bmcr and
ksz8_r_phy_bmcr functions for KSZ8794 and KSZ8873 variants in the ksz8795
driver. Previously, the code erroneously used Bit 7 of port register 0xD
for both chip variants, which is actually for LED configuration. This
update ensures the correct registers and bits are used for the PHY
loopback feature:

- For KSZ8794: Use 0xF / Bit 7.
- For KSZ8873: Use 0xD / Bit 0.

The lack of loopback support was seen on KSZ8873 system by using
"ethtool -t lanX". After this patch, the ethtool selftest will work,
but only if port is not part of a bridge.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Link: https://lore.kernel.org/r/20240124123314.734815-4-o.rempel@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>