Pull ubifs changes from Artem Bityutskiy:
 "Mostly fixes for the power cut emulation UBIFS mode, and only one
  functional change which fixes a return error code"

* tag 'upstream-3.13-rc1' of git://git.infradead.org/linux-ubifs:
  UBIFS: correct data corruption range
  UBIFS: fix return code
  UBIFS: remove unnecessary code in ubifs_garbage_collect

Pull fuse updates from Miklos Szeredi:
 "This adds a ->writepage() implementation to fuse, improving mmaped
  writeout and paving the way for buffered writeback.

  And there's a patch to add a fix minor number for /dev/cuse, similarly
  to /dev/fuse"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: writepages: protect secondary requests from fuse file release
  fuse: writepages: update bdi writeout when deleting secondary request
  fuse: writepages: crop secondary requests
  fuse: writepages: roll back changes if request not found
  cuse: add fix minor number to /dev/cuse
  fuse: writepage: skip already in flight
  fuse: writepages: handle same page rewrites
  fuse: writepages: fix aggregation
  fuse: fix race in fuse_writepages()
  fuse: Implement writepages callback
  fuse: don't BUG on no write file
  fuse: lock page in mkwrite
  fuse: Prepare to handle multiple pages in writeback
  fuse: Getting file for writeback helper

Pull ext[23], udf and quota fixes from Jan Kara:
 "Assorted fixes in quota, ext2, ext3 & udf.

  Probably the most important is a fix of fs corruption issue in ext2
  XIP support (OTOH xip is rarely used)"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  ext2: Fix fs corruption in ext2_get_xip_mem()
  quota: info leak in quota_getquota()
  jbd: Revert "jbd: remove dependency on __GFP_NOFAIL"
  udf: fix for pathetic mount times in case of invalid file system
  ext3: Count journal as bsddf overhead in ext3_statfs

Pull f2fs updates from Jaegeuk Kim:
 "This patch-set includes the following major enhancement patches.
   - add a sysfs to control reclaiming free segments
   - enhance the f2fs global lock procedures
   - enhance the victim selection flow
   - wait for selected node blocks during fsync
   - add some tracepoints
   - add a config to remove abundant BUG_ONs

  The other bug fixes are as follows.
   - fix deadlock on acl operations
   - fix some bugs with respect to orphan inodes

  And, there are a bunch of cleanups"

* tag 'for-f2fs-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (42 commits)
  f2fs: issue more large discard command
  f2fs: fix memory leak after kobject init failed in fill_super
  f2fs: cleanup waiting routine for writeback pages in cp
  f2fs: avoid to use a NULL point in destroy_segment_manager
  f2fs: remove unnecessary TestClearPageError when wait pages writeback
  f2fs: update f2fs document
  f2fs: avoid to wait all the node blocks during fsync
  f2fs: check all ones or zeros bitmap with bitops for better mount performance
  f2fs: change the method of calculating the number summary blocks
  f2fs: fix calculating incorrect free size when update xattr in __f2fs_setxattr
  f2fs: add an option to avoid unnecessary BUG_ONs
  f2fs: introduce CONFIG_F2FS_CHECK_FS for BUG_ON control
  f2fs: fix a deadlock during init_acl procedure
  f2fs: clean up acl flow for better readability
  f2fs: remove unnecessary segment bitmap updates
  f2fs: add tracepoint for vm_page_mkwrite
  f2fs: add tracepoint for set_page_dirty
  f2fs: remove redundant set_page_dirty from write_compacted_summaries
  f2fs: add reclaiming control by sysfs
  f2fs: introduce f2fs_balance_fs_bg for some background jobs
  ...

Pull cgroup changes from Tejun Heo:
 "Not too much activity this time around.  css_id is finally killed and
  a minor update to device_cgroup"

* 'for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  device_cgroup: remove can_attach
  cgroup: kill css_id
  memcg: stop using css id
  memcg: fail to create cgroup if the cgroup id is too big
  memcg: convert to use cgroup id
  memcg: convert to use cgroup_is_descendant()

Pull libata changes from Tejun Heo:
 "Nothing too interesting.  Only two minor fixes in libata core.  Most
  changes are specific to hardware which isn't too common"

* 'for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ahci: Add Device IDs for Intel Wildcat Point-LP
  sata_rcar: Convert to clk_prepare/unprepare
  drivers/libata: Set max sector to 65535 for Slimtype DVD A DS8A9SH drive
  libata: Add some missing command descriptions
  sata_highbank: clear whole array in highbank_initialize_phys()
  ahci: disabled FBS prior to issuing software reset
  libata: Fix display of sata speed
  ahci: imx: setup power saving methods
  ata_piix: minor typo and a printk fix
  ahci: Changing two module params with static and __read_mostly

Pull percpu changes from Tejun Heo:
 "Two smallish changes for percpu.  Two patches to remove unused
  this_cpu_xor() and one to fix a bug in percpu init failure path so
  that it can reach the proper BUG() instead of oopsing earlier"

* 'for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  x86: remove this_cpu_xor() implementation
  percpu: remove this_cpu_xor() implementation
  percpu: fix bootmem error handling in pcpu_page_first_chunk()

Pull devicetree updates from Rob Herring:
 "DeviceTree updates for 3.13.  This is a bit larger pull request than
  usual for this cycle with lots of clean-up.

   - Cross arch clean-up and consolidation of early DT scanning code.
   - Clean-up and removal of arch prom.h headers.  Makes arch specific
     prom.h optional on all but Sparc.
   - Addition of interrupts-extended property for devices connected to
     multiple interrupt controllers.
   - Refactoring of DT interrupt parsing code in preparation for
     deferred probe of interrupts.
   - ARM cpu and cpu topology bindings documentation.
   - Various DT vendor binding documentation updates"

* tag 'devicetree-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (82 commits)
  powerpc: add missing explicit OF includes for ppc
  dt/irq: add empty of_irq_count for !OF_IRQ
  dt: disable self-tests for !OF_IRQ
  of: irq: Fix interrupt-map entry matching
  MIPS: Netlogic: replace early_init_devtree() call
  of: Add Panasonic Corporation vendor prefix
  of: Add Chunghwa Picture Tubes Ltd. vendor prefix
  of: Add AU Optronics Corporation vendor prefix
  of/irq: Fix potential buffer overflow
  of/irq: Fix bug in interrupt parsing refactor.
  of: set dma_mask to point to coherent_dma_mask
  of: add vendor prefix for PHYTEC Messtechnik GmbH
  DT: sort vendor-prefixes.txt
  of: Add vendor prefix for Cadence
  of: Add empty for_each_available_child_of_node() macro definition
  arm/versatile: Fix versatile irq specifications.
  of/irq: create interrupts-extended property
  microblaze/pci: Drop PowerPC-ism from irq parsing
  of/irq: Create of_irq_parse_and_map_pci() to consolidate arch code.
  of/irq: Use irq_of_parse_and_map()
  ...

Pull LED subsystem changes from Bryan Wu:
 "LED subsystem updates for 3.13 are basically cleanup and also add a
  new driver for PCA9685"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds:
  leds: lp55xx: handle enable pin in driver
  leds-gpio: of: led should not be created if its status is disabled
  of: introduce of_get_available_child_count
  leds: Added driver for the NXP PCA9685 I2C chip
  leds: pwm: Remove redundant of_match_ptr
  leds: Include linux/of.h header
  leds: dac124s085: Remove redundant spi_set_drvdata
  leds: lp55xx: enable setting default trigger
  leds: blinkm: Remove redundant break

Pull clock framework changes from Mike Turquette:
 "The clock changes for 3.13 are an even mix of framework improvements &
  bug fixes along with updates to existing clock drivers and the
  additional of new clock drivers"

* tag 'clk-for-linus-3.13' of git://git.linaro.org/people/mturquette/linux:
  clk: new driver for efm32 SoC
  clk: of: helper for determining number of parent clocks
  clk/zynq: Fix possible memory leak
  clk: keystone: Build Keystone clock drivers
  clk: keystone: Add gate control clock driver
  clk: keystone: add Keystone PLL clock driver
  Documentation: Add documentation for APM X-Gene clock binding
  clk: arm64: Add DTS clock entry for APM X-Gene Storm SoC
  clk: Add APM X-Gene SoC clock driver
  clk: wm831x: get rid of the implementation of remove function
  clk: Correct lookup logic in clk_fetch_parent_index()
  clk: Use kcalloc() to allocate arrays
  clk: Add error handling to clk_fetch_parent_index()

Pull GPIO changes from Linus Walleij:
 "Here is the bulk of GPIO changes for the v3.13 development cycle.

  I've got ACKs for the things that affect other subsystems (or it's my
  own subsystem, like pinctrl).  Most of that pertain to an attempt from
  my side to consolidate and get rid of custom GPIO implementations in
  the ARM tree.  I will continue doing this.

  The main change this time is the new GPIO descriptor API, background
  for this can be found in Corbet's summary from this january in LWN:

    http://lwn.net/Articles/533632/

  Summary:

   - Merged the GPIO descriptor API from Alexandre Courbot.  This is a
     first step toward trying to get rid of the global GPIO numberspace
     for the future.

   - Add an API so that driver can flag that a certain GPIO line is
     being used by a irqchip backend for generating IRQs, so that we can
     enforce checks, like not allowing users to switch that line to an
     output at runtime, since this makes no sense.  Implemented
     corresponding calls in a few select drivers.

   - ACPI GPIO cleanups, refactorings and switch to using the
     descriptor-based interface.

   - Support for the TPS80036 Palmas GPIO variant.

   - A new driver for the Broadcom Kona GPIO SoC IP block.

   - Device tree support for the PCF857x driver.

   - A set of ARM GPIO refactorings with the goal of getting rid of a
     bunch of custom GPIO implementations from the arch/arm/* tree:

     * Move the IOP GPIO driver to the GPIO subsystem and fix all users
       to use the gpiolib API for accessing GPIOs.  Delete the old
       custom GPIO implementation.

     * Delete the unused custom PXA GPIO implemention.

     * Convert all users of the IXP4 custom GPIO implementation to use
       gpiolib and delete the custom implementation.

     * Delete the custom Gemini GPIO implementation, also completely
       unused.

   - Various cleanups and renamings"

* tag 'gpio-v3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (85 commits)
  gpio: gpio-mxs: Remove unneeded dt checks
  gpio: pl061: don't depend on CONFIG_ARM
  gpio: bcm-kona: add missing .owner to struct gpio_chip
  gpiolib: provide a declaration of seq_file in gpio/driver.h
  gpiolib: include gpio/consumer.h in of_gpio.h for desc_to_gpio()
  gpio: provide stubs for devres gpio functions
  gpiolib: devres: add missing headers
  gpiolib: make GPIO_DEVRES depend on GPIOLIB
  gpiolib: devres: fix devm_gpiod_get_index()
  gpiolib / ACPI: document the GPIO descriptor based interface
  gpiolib / ACPI: allow passing GPIOF_ACTIVE_LOW for GpioInt resources
  gpiolib / ACPI: add ACPI support for gpiod_get_index()
  gpiolib / ACPI: convert to gpiod interfaces
  gpiolib: add gpiod_get() and gpiod_put() functions
  gpiolib: port of_ functions to use gpiod
  gpiolib: export descriptor-based GPIO interface
  Fixup "MAINTAINERS: GPIO-INTEL-MID: add maintainer"
  gpio: bcm281xx: Don't print addresses of GPIO area in probe()
  gpio: tegra: use new gpio_lock_as_irq() API
  gpio: rcar: Include linux/of.h header
  ...

Merge tag 'pinctrl-for-v3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "Main pin control pull request for the v3.13 cycle.

  The changes hitting arch/blackfin are ACKed by the Blackfin
  maintainer, and the device tree bindings are ACKed to the extent
  possible by someone from the device tree maintainers group.

   - Blackfin ADI pin control driver, we move yet another architecture
     under this subsystem umbrella.

   - Incremental updates to the Renesas Super-H PFC pin control driver.
     New subdriver for the r8a7791 SoC.

   - Non-linear GPIO ranges from the gpiolib side of things, this
     enabled simplified device tree bindings by referring entire groups
     of pins on some pin controller to act as back-end for a certain
     GPIO-chip driver.

   - Add the Abilis TB10x pin control driver used on the ARC
     architecture.  Also the corresponding GPIO driver is merged through
     this tree, so the ARC has full support for pins and GPIOs after
     this.

   - Subdrivers for Freescale i.MX1, i.MX27 and i.MX50 pin controller
     instances.  The i.MX1 and i.MX27 is an entirely new family
     (silicon) of controllers whereas i.MX50 is a variant of the
     previous supported controller.

   - Then the usual slew of fixes, cleanups and incremental updates"

The ARC DT changes are apparently still pending, that hopefully gets
sorted out in a timely manner.

* tag 'pinctrl-for-v3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (48 commits)
  pinctrl: imx50: add pinctrl support code for the IMX50 SoC
  pinctrl: at91: copy define to driver
  pinctrl: remove minor dead code
  pinctrl: imx: fix using pin->input_val wrongly
  pinctrl: imx1: fix return value check in imx1_pinctrl_core_probe()
  gpio: tb10x: fix return value check in tb10x_gpio_probe()
  gpio: tb10x: use module_platform_driver to simplify the code
  pinctrl: imx27: imx27 pincontrol driver
  pinctrl: imx1 core driver
  pinctrl: sh-pfc: r8a7791 PFC support
  sh-pfc: r8a7778: Add CAN pin groups
  gpio: add TB10x GPIO driver
  pinctrl: at91: correct a few typos
  pinctrl: mvebu: remove redundant of_match_ptr
  pinctrl: tb10x: use module_platform_driver to simplify the code
  pinctrl: tb10x: fix the error handling in tb10x_pinctrl_probe()
  pinctrl: add documentation for pinctrl_get_group_pins()
  pinctrl: rockchip: emulate both edge triggered interrupts
  pinctrl: rockchip: add rk3188 specifics
  pinctrl: rockchip: remove redundant check
  ...

Pull sound updates from Takashi Iwai:
 "There are no too intrusive changes in this update batch.  The biggest
  LOC is found in the new DICE driver, and other small changes are
  scattered over the whole sound subtree (which is a common pattern).

  Below are highlights:

   - ALSA core:
     * Memory allocation support with genpool
     * Fix blocking in drain ioctl of compress_offload

   - HD-audio:
     * Improved AMD HDMI supports
     * Intel HDMI detection improvements
     * thinkpad_acpi mute-key integration
     * New PCI ID, New ALC255,285,293 codecs, CX20952

   - USB-audio:
     * New buffer size management
     * Clean up endpoint handling codes

   - ASoC:
     * Further work on the dmaengine helpers, including support for
       configuring the parameters for DMA by reading the capabilities of
       the DMA controller which removes some guesswork and magic numbers
       from drivers.
     * A refresh of the documentation.
     * Conversions of many drivers to direct regmap API usage in order
       to allow the ASoC level register I/O code to be removed, this
       will hopefully be completed by v3.14.
     * Support for using async register I/O in DAPM, reducing the time
       taken to implement power transitions on systems that support it.

   - Firewire: DICE driver

   - Lots of small fixes for bugs reported by Coverity"

* tag 'sound-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (382 commits)
  ALSA: hda/realtek - Add new codec ALC255/ALC3234 UAJ supported
  ALSA: hda - Apply MacBook fixups for CS4208 correctly
  ASoC: fsl: imx-wm8962: remove an unneeded check
  ASoC: fsl: imx-pcm-fiq: Remove unused 'runtime' variable
  ALSA: hda/realtek - Make fixup regs persist after resume
  ALSA: hda_intel: ratelimit "spurious response" message
  ASoC: generic-dmaengine-pcm: Use SNDRV_DMA_TYPE_DEV_IRAM as default
  ASoC: dapm: Use WARN_ON() instead of BUG_ON()
  ASoC: wm_adsp: Fix BUG_ON() and WARN_ON() usages
  ASoC: Replace BUG() with WARN()
  ASoC: wm_hubs: Replace BUG() with WARN()
  ASoC: wm8996: Replace BUG() with WARN()
  ASoC: wm8962: Replace BUG() with WARN()
  ASoC: wm8958: Replace BUG() with WARN()
  ASoC: wm8904: Replace BUG() with WARN()
  ASoC: wm8900: Replace BUG() with WARN()
  ASoC: wm8350: Replace BUG() with WARN()
  ASoC: txx9: Use WARN_ON() instead of BUG_ON()
  ASoC: sh: Use WARN_ON() instead of BUG_ON()
  ASoC: rcar: Use WARN_ON() instead of BUG_ON()
  ...

Pull spi updates from Mark Brown:
 "As well as the usual driver updates and cleanups there's a few
  improvements to the core here:

   - The start of some improvements to factor out more of the SPI
     message loop into the core.  Right now this is just simplifying the
     code a bit but hopefully next time around we'll also have managed
     to roll out some noticable performance improvements which drivers
     can take advantage of.
   - Support for loading modules for ACPI enumerated SPI devices.
   - Managed registration for SPI controllers.
   - Helper for another common I/O pattern"

* tag 'spi-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (116 commits)
  spi/hspi: add device tree support
  spi: atmel: fix return value check in atmel_spi_probe()
  spi: spi-imx: only enable the clocks when we start to transfer a message
  spi/s3c64xx: Fix doubled clock disable on suspend
  spi/s3c64xx: Do not ignore return value of spi_master_resume/suspend
  spi: spi-mxs: Use u32 instead of uint32_t
  spi: spi-mxs: Don't set clock for each xfer
  spi: spi-mxs: Clean up setup_transfer function
  spi: spi-mxs: Remove check of spi mode bits
  spi: spi-mxs: Fix race in setup method
  spi: spi-mxs: Remove bogus setting of ssp clk rate field
  spi: spi-mxs: Remove full duplex check, spi core already does it
  spi: spi-mxs: Fix chip select control bits in DMA mode
  spi: spi-mxs: Fix extra CS pulses and read mode in multi-transfer messages
  spi: spi-mxs: Change flag arguments in txrx functions to bit flags
  spi: spi-mxs: Always clear INGORE_CRC, to keep CS asserted
  spi: spi-mxs: Remove mxs_spi_enable and mxs_spi_disable
  spi: spi-mxs: Always set LOCK_CS
  spi/s3c64xx: Add missing pm_runtime_put on setup fail
  spi/s3c64xx: Add missing pm_runtime_set_active() call in probe()
  ...

Pull regulator updates from Mark Brown:
 "Lots of driver updates here plus some nice new core features, the main
  one being the first:

   - Enable support for providing a dummy regulator when we know that
     one must exist for the device to be functional.  This makes it much
     easier to add regulator support to drivers since we don't require
     that the machine integration for all systems using the device be
     updated to provide regulators.
   - Substantial reduction in the amount of busy waiting done while
     waiting for enables to complete.
   - Allow MFDs to distribute regulator supplies to child devices so we
     don't have to expose the internal structure of MFDs outside of the
     driver.
   - Managed registeration for regulators"

* tag 'regulator-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (113 commits)
  regulator: s5m8767: Modify parsing method of the voltage table of buck2/3/4
  regulator: s5m8767: Modify parse_dt function to parse data related to ramp
  regulator: da9052: Revert se apply_[reg|bit] with regmap based voltage_sel operations
  mfd: arizona: Specify supply mappings for Arizona CODECs
  mfd: Allow mapping regulator supplies to MFD device from children
  regulator: core: Add ability to create a lookup alias for supply
  regulator: tps65910: Fix checkpatch issue
  regulator: tps65023: Fix checkpatch issue
  regulator: tps6105x: Fix checkpatch issue
  regulator: mc13783: Fix checkpatch issue
  regulator: max8997: Fix checkpatch issue
  regulator: lp3971: Fix checkpatch issue
  regulator: fixed: Fix checkpatch issue
  regulator: anatop: Fix checkpatch issue
  regulator: Add REGULATOR_LINEAR_RANGE macro
  regulator: Remove max_uV from struct regulator_linear_range
  regulator: ti-abb: Fix operator precedence typo
  regulator: tps65910: get regulators node from parent node only
  regulator: tps6586x: get regulators node from parent node only
  regulator: tps65090: get regulators node from parent node only
  ...

Pull regmap updates from Mark Brown:
 "The main thing this time around has been some improvments to async
  I/O.

   - Cleaned up the async I/O support and extended it to allow single
     register writes more easily.  This is now used where possible for
     internally generated I/O, providing performance improvements for
     devices that can do async I/O.
   - An API for issuing a sequence of register writes as a single
     operation.  Some devices and buses can take advantage of this to do
     the I/O faster.
   - Addition of regmap_field APIs which help drivers for devices with
     repeated IPs or which move registers around between revisions to
     share helpers.
   - Support for SPMI buses"

* tag 'regmap-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: add SPMI support
  regmap: debugfs: Fix a boot time crash with early regmap init
  regmap: irq: clear status when disable irq
  regmap: Only send a single buffer for async I/O if writing one register
  regmap: spi: Handle async writes of only one buffer
  regmap: new API regmap_multi_reg_write() definition
  regmap: Use async I/O during cache sync
  regmap: Use async I/O for patch application
  regmap: Fix regmap_bulk_write single-rw mutex deadlock
  regmap: Provide asynchronous write and update bits operations
  regmap: Simplify the initiation of async I/O
  regmap: Don't generate gather writes for single register raw writes
  regmap: Cache async work structures
  regmap: add helper macro to set min/max range of register
  regmap: Add regmap_fields APIs
  regmap: add regmap_field_update_bits()

Pull hwmon updates from Guenter Roeck:
 "Introduce new hwmon API functions hwmon_device_register_with_groups
  and devm_hwmon_device_register_with_groups, and convert several
  drivers to use the new API.

  Add support for EMC1404, EMC1424, LTC2977, LTC2978A, LM25063 to
  existing drivers

  Various cleanups in several drivers"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (49 commits)
  hwmon: (w83793) Clean up a signedness issue
  hwmon: (nct6775) Remove an unused variable
  hwmon: (emc1403) Add support for EMC1404 and EMC1424
  hwmon: (emc1403) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (pmbus/ltc2978): Add support for LTC2978A
  hwmon: (pmbus/ltc2978): Add support for LTC2977
  hwmon: (pmbus/lm25066) Add support for LM25063
  hwmon: Correct some typos
  hwmon: (gpio-fan) Include linux/of.h header
  hwmon: (lm70) Remove redundant spi_set_drvdata
  hwmon: (adcxx) Remove redundant spi_set_drvdata
  hwmon: (jc42) fix coccinelle warnings
  hwmon: (ltc4261) fix coccinelle warnings
  hwmon: (lm95234) fix coccinelle warnings
  hwmon: (max6697) fix coccinelle warnings
  hwmon: (max6642 fix coccinelle warnings
  hwmon: (ds1621) fix coccinelle warnings
  hwmon: (nct6775) fix coccinelle warnings
  hwmon: (jc42) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (ltc4261) Convert to use devm_hwmon_device_register_with_groups
  ...

Pull powerpc updates from Benjamin Herrenschmidt:
 "The bulk of this is LE updates.  One should now be able to build an LE
  kernel and even run some things in it.

  I'm still sitting on a handful of patches to enable the new ABI that I
  *might* still send this merge window around, but due to the
  incertainty (they are pretty fresh) I want to keep them separate.

  Other notable changes are some infrastructure bits to better handle
  PCI pass-through under KVM, some bits and pieces added to the new
  PowerNV platform support such as access to the CPU SCOM bus via sysfs,
  and support for EEH error handling on PHB3 (Power8 PCIe).

  We also grew arch_get_random_long() for both pseries and powernv when
  running on P7+ and P8, exploiting the HW rng.

  And finally various embedded updates from freescale"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (154 commits)
  powerpc: Fix fatal SLB miss when restoring PPR
  powerpc/powernv: Reserve the correct PE number
  powerpc/powernv: Add PE to its own PELTV
  powerpc/powernv: Add support for indirect XSCOM via debugfs
  powerpc/scom: Improve debugfs interface
  powerpc/scom: Enable 64-bit addresses
  powerpc/boot: Properly handle the base "of" boot wrapper
  powerpc/bpf: Support MOD operation
  powerpc/bpf: Fix DIVWU instruction opcode
  of: Move definition of of_find_next_cache_node into common code.
  powerpc: Remove big endianness assumption in of_find_next_cache_node
  powerpc/tm: Remove interrupt disable in __switch_to()
  powerpc: word-at-a-time optimization for 64-bit Little Endian
  powerpc/bpf: BPF JIT compiler for 64-bit Little Endian
  powerpc: Only save/restore SDR1 if in hypervisor mode
  powerpc/pmu: Fix ADB_PMU_LED_IDE dependencies
  powerpc/nvram: Fix endian issue when using the partition length
  powerpc/nvram: Fix endian issue when reading the NVRAM size
  powerpc/nvram: Scan partitions only once
  powerpc/mpc512x: remove unnecessary #if
  ...

Pull microblaze updates from Michal Simek:
 - Get rid of NO_MMU Kconfig
 - mmap2 fixups
 - Some minor cleanups

* tag 'microblaze-3.13-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Remove incorrect file path
  microblaze: Fix bug with mmap2 syscall MB implementation
  microblaze: Use predefined SYSCALL_DEFINE macro
  microblaze: Remove deprecated IRQF_DISABLED
  microblaze: Calculate kernel pad automatically
  microblaze: Remove unused NO_MMU Kconfig parameter

Pull metag architecture changes from James Hogan:
 - A change to remove the last dependence on bootloader exception
   handlers so that QEMU can more easily boot an SMP Linux/Meta kernel
   image directly.
 - A fix for a minor off by one error in a BUG_ON condition found by Dan
   Carpenter.

* tag 'metag-for-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
  metag: off by one in setup_bootmem_node()
  metag: handle low level kicks directly

Pull h8300 platform removal from Guenter Roeck:
 "The patch series has been in -next for more than one relase cycle.  I
  did get a number of Acks, and no objections.

  H8/300 has been dead for several years, the kernel for it has not
  compiled for ages, and recent versions of gcc for it are broken.
  Remove support for it"

* tag 'h8300-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  CREDITS: Add Yoshinori Sato for h8300
  fs/minix: Drop dependency on H8300
  Drop remaining references to H8/300 architecture
  Drop MAINTAINERS entry for H8/300
  watchdog: Drop references to H8300 architecture
  net/ethernet: Drop H8/300 Ethernet driver
  net/ethernet: smsc9194: Drop conditional code for H8/300
  ide: Drop H8/300 driver
  Drop support for Renesas H8/300 (h8300) architecture

Pull x86 UV debug changes from Ingo Molnar:
 "Various SGI UV debuggability improvements, amongst them KDB support,
  with related core KDB enabling patches changing kernel/debug/kdb/"

* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "x86/UV: Add uvtrace support"
  x86/UV: Add call to KGDB/KDB from NMI handler
  kdb: Add support for external NMI handler to call KGDB/KDB
  x86/UV: Check for alloc_cpumask_var() failures properly in uv_nmi_setup()
  x86/UV: Add uvtrace support
  x86/UV: Add kdump to UV NMI handler
  x86/UV: Add summary of cpu activity to UV NMI handler
  x86/UV: Update UV support for external NMI signals
  x86/UV: Move NMI support

Pull x86 uaccess changes from Ingo Molnar:
 "A single change that micro-optimizes __copy_*_user_inatomic(), used by
  the futex code"

* 'x86-uaccess-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Add 1/2/4/8 byte optimization to 64bit __copy_{from,to}_user_inatomic

Pull x86 reboot changes from Ingo Molnar:
 "Misc changes - the only one with functional impact should be commit
  16c21ae5 ("reboot: Allow specifying warm/cold reset for CF9 boot
  type") which extends cold/warm reboot handling to the 0xCF9 reboot
  method"

* 'x86-reboot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/reboot: Correct pr_info() log message in the set_bios/pci/kbd_reboot()
  x86/reboot: Sort reboot DMI quirks by vendor
  x86/reboot: Remove the duplicate C6100 entry in the reboot quirks list
  reboot: Allow specifying warm/cold reset for CF9 boot type

Pull x86 platform fixlet from Ingo Molnar:
 "A single __initdata fix"

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/geode: Fix incorrect placement of __initdata tag

Pull x86 mm fixlet from Ingo Molnar:
 "One cleanup that documents a particular detail in init_mem_mapping()"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Add 'step_size' comments to init_mem_mapping()

Pull x86 RAS changes from Ingo Molnar:
 "The biggest change adds support for Intel 'CPER' (UEFI Common Platform
  Error Record) error logging, which builds upon an enhanced error
  logging mechanism available on Xeon processors.

  Full description is here:

    http://www.intel.com/content/www/us/en/architecture-and-technology/enhanced-mca-logging-xeon-paper.html

  This change provides a module (and support code) to check for an
  extended error log and prints extra details about the error on the
  console"

* 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  ACPI, x86: Fix extended error log driver to depend on CONFIG_X86_LOCAL_APIC
  dmi: Avoid unaligned memory access in save_mem_devices()
  Move cper.c from drivers/acpi/apei to drivers/firmware/efi
  EDAC, GHES: Update ghes error record info
  ACPI, APEI, CPER: Cleanup CPER memory error output format
  ACPI, APEI, CPER: Enhance memory reporting capability
  ACPI, APEI, CPER: Add UEFI 2.4 support for memory error
  DMI: Parse memory device (type 17) in SMBIOS
  ACPI, x86: Extended error log driver for x86 platform
  bitops: Introduce a more generic BITMASK macro
  ACPI, CPER: Update cper info
  ACPI, APEI, CPER: Fix status check during error printing

Pull x86 iommu changes from Ingo Molnar:
 "Make it easier to turn off the old AMD GART code"

* 'x86-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/iommu: Clean up the CONFIG_GART_IOMMU config option a bit
  x86/iommu: Don't make AMD_GART depend on EXPERT and default y

Pull x86/intel-mid changes from Ingo Molnar:
 "Update the 'intel mid' (mobile internet device) platform code as Intel
  is rolling out more SoC designs.

  This gets rid of most of the 'MRST' platform code in the process,
  mostly by renaming and shuffling code around into their respective
  'intel-mid' platform drivers"

* 'x86-intel-mid-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, intel-mid: Do not re-introduce usage of obsolete __cpuinit
  intel_mid: Move platform device setups to their own platform_<device>.* files
  x86: intel-mid: Add section for sfi device table
  intel-mid: sfi: Allow struct devs_id.get_platform_data to be NULL
  intel_mid: Moved SFI related code to sfi.c
  intel_mid: Added custom handler for ipc devices
  intel_mid: Added custom device_handler support
  intel_mid: Refactored sfi_parse_devs() function
  intel_mid: Renamed *mrst* to *intel_mid*
  pci: intel_mid: Return true/false in function returning bool
  intel_mid: Renamed *mrst* to *intel_mid*
  mrst: Fixed indentation issues
  mrst: Fixed printk/pr_* related issues

Pull x86/hyperv changes from Ingo Molnar:
 "These changes enable Linux guests to boot as 'Modern VM' guest kernels
  on MS-Hyperv hosts"

* 'x86-hyperv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, hyperv: Move a variable to avoid an unused variable warning
  x86, hyperv: Fix build error due to missing <asm/apic.h> include
  x86, hyperv: Correctly guard the local APIC calibration code
  x86, hyperv: Get the local APIC timer frequency from the hypervisor

Pull x86 EFI changes from Ingo Molnar:
 "Main changes:

   - Add support for earlyprintk=efi which uses the EFI framebuffer.
     Very useful for debugging boot problems.

   - EFI stub support for large memory maps (more than 128 entries)

   - EFI ARM support - this was mostly done by generalizing x86 <-> ARM
     platform differences, such as by moving x86 EFI code into
     drivers/firmware/efi/ and sharing it with ARM.

   - Documentation updates

   - misc fixes"

* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
  x86/efi: Add EFI framebuffer earlyprintk support
  boot, efi: Remove redundant memset()
  x86/efi: Fix config_table_type array termination
  x86 efi: bugfix interrupt disabling sequence
  x86: EFI stub support for large memory maps
  efi: resolve warnings found on ARM compile
  efi: Fix types in EFI calls to match EFI function definitions.
  efi: Renames in handle_cmdline_files() to complete generalization.
  efi: Generalize handle_ramdisks() and rename to handle_cmdline_files().
  efi: Allow efi_free() to be called with size of 0
  efi: use efi_get_memory_map() to get final map for x86
  efi: generalize efi_get_memory_map()
  efi: Rename __get_map() to efi_get_memory_map()
  efi: Move unicode to ASCII conversion to shared function.
  efi: Generalize relocate_kernel() for use by other architectures.
  efi: Move relocate_kernel() to shared file.
  efi: Enforce minimum alignment of 1 page on allocations.
  efi: Rename memory allocation/free functions
  efi: Add system table pointer argument to shared functions.
  efi: Move common EFI stub code from x86 arch code to common location
  ...

Pull x86 cpu changes from Ingo Molnar:
 "The biggest change that stands out is the increase of the
  CONFIG_NR_CPUS range from 4096 to 8192 - as real hardware out there
  already went beyond 4k CPUs ...

  We only allow more than 512 CPUs if offstack cpumasks are enabled.

  CONFIG_MAXSMP=y remains to be the 'you are nuts!' extreme testcase,
  which now means a max of 8192 CPUs"

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Increase max CPU count to 8192
  x86/cpu: Allow higher NR_CPUS values
  x86/cpu: Always print SMP information in /proc/cpuinfo
  x86/cpu: Track legacy CPU model data only on 32-bit kernels

Pull x86 cleanups from Ingo Molnar:
 "Two small cleanups"

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, msr: Use file_inode(), not f_mapping->host
  x86: mkpiggy.c: Explicitly close the output file

Pull x86 build changes from Ingo Molnar:
 "Two small changes"

* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, defconfig: Add DEVTMPFS and DEVTMPFS_MOUNT to *86*_defconfig
  x86, build: move build output statistics away from stderr

Pull x86 boot changes from Ingo Molnar:
 "Two changes that prettify and compactify the SMP bootup output from:

     smpboot: Booting Node   0, Processors  #1 #2 #3 OK
     smpboot: Booting Node   1, Processors  #4 #5 #6 #7 OK
     smpboot: Booting Node   2, Processors  #8 #9 #10 #11 OK
     smpboot: Booting Node   3, Processors  #12 #13 #14 #15 OK
     Brought up 16 CPUs

  to something like:

     x86: Booting SMP configuration:
     .... node  #0, CPUs:        #1  #2  #3
     .... node  #1, CPUs:    #4  #5  #6  #7
     .... node  #2, CPUs:    #8  #9 #10 #11
     .... node  #3, CPUs:   #12 #13 #14 #15
     x86: Booted up 4 nodes, 16 CPUs"

* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Further compress CPUs bootup message
  x86: Improve the printout of the SMP bootup CPU table

Pull x86 user access changes from Ingo Molnar:
 "This tree contains two copy_[from/to]_user() build time checking
  changes/enhancements from Jan Beulich.

  The desired outcome is to get better compiler warnings with
  CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y, to keep people from
  introducing bugs such as overflows and information leaks"

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Unify copy_to_user() and add size checking to it
  x86: Unify copy_from_user() size checking

Pull x86/apic fix from Ingo Molnar:
 "A single fix to the IO-APIC / local-APIC shutdown sequence"

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic: Disable I/O APIC before shutdown of the local APIC

Pull timer changes from Ingo Molnar:
 "Main changes in this cycle were:

   - Updated full dynticks support.

   - Event stream support for architected (ARM) timers.

   - ARM clocksource driver updates.

   - Move arm64 to using the generic sched_clock framework & resulting
     cleanup in the generic sched_clock code.

   - Misc fixes and cleanups"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
  x86/time: Honor ACPI FADT flag indicating absence of a CMOS RTC
  clocksource: sun4i: remove IRQF_DISABLED
  clocksource: sun4i: Report the minimum tick that we can program
  clocksource: sun4i: Select CLKSRC_MMIO
  clocksource: Provide timekeeping for efm32 SoCs
  clocksource: em_sti: convert to clk_prepare/unprepare
  time: Fix signedness bug in sysfs_get_uname() and its callers
  timekeeping: Fix some trivial typos in comments
  alarmtimer: return EINVAL instead of ENOTSUPP if rtcdev doesn't exist
  clocksource: arch_timer: Do not register arch_sys_counter twice
  timer stats: Add a 'Collection: active/inactive' line to timer usage statistics
  sched_clock: Remove sched_clock_func() hook
  arch_timer: Move to generic sched_clock framework
  clocksource: tcb_clksrc: Remove IRQF_DISABLED
  clocksource: tcb_clksrc: Improve driver robustness
  clocksource: tcb_clksrc: Replace clk_enable/disable with clk_prepare_enable/disable_unprepare
  clocksource: arm_arch_timer: Use clocksource for suspend timekeeping
  clocksource: dw_apb_timer_of: Mark a few more functions as __init
  clocksource: Put nodes passed to CLOCKSOURCE_OF_DECLARE callbacks centrally
  arm: zynq: Enable arm_global_timer
  ...

Pull scheduler changes from Ingo Molnar:
 "The main changes in this cycle are:

   - (much) improved CONFIG_NUMA_BALANCING support from Mel Gorman, Rik
     van Riel, Peter Zijlstra et al.  Yay!

   - optimize preemption counter handling: merge the NEED_RESCHED flag
     into the preempt_count variable, by Peter Zijlstra.

   - wait.h fixes and code reorganization from Peter Zijlstra

   - cfs_bandwidth fixes from Ben Segall

   - SMP load-balancer cleanups from Peter Zijstra

   - idle balancer improvements from Jason Low

   - other fixes and cleanups"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits)
  ftrace, sched: Add TRACE_FLAG_PREEMPT_RESCHED
  stop_machine: Fix race between stop_two_cpus() and stop_cpus()
  sched: Remove unnecessary iteration over sched domains to update nr_busy_cpus
  sched: Fix asymmetric scheduling for POWER7
  sched: Move completion code from core.c to completion.c
  sched: Move wait code from core.c to wait.c
  sched: Move wait.c into kernel/sched/
  sched/wait: Fix __wait_event_interruptible_lock_irq_timeout()
  sched: Avoid throttle_cfs_rq() racing with period_timer stopping
  sched: Guarantee new group-entities always have weight
  sched: Fix hrtimer_cancel()/rq->lock deadlock
  sched: Fix cfs_bandwidth misuse of hrtimer_expires_remaining
  sched: Fix race on toggling cfs_bandwidth_used
  sched: Remove extra put_online_cpus() inside sched_setaffinity()
  sched/rt: Fix task_tick_rt() comment
  sched/wait: Fix build breakage
  sched/wait: Introduce prepare_to_wait_event()
  sched/wait: Add ___wait_cond_timeout() to wait_event*_timeout() too
  sched: Remove get_online_cpus() usage
  sched: Fix race in migrate_swap_stop()
  ...

Pull perf updates from Ingo Molnar:
 "As a first remark I'd like to note that the way to build perf tooling
  has been simplified and sped up, in the future it should be enough for
  you to build perf via:

        cd tools/perf/
        make install

  (ie without the -j option.) The build system will figure out the
  number of CPUs and will do a parallel build+install.

  The various build system inefficiencies and breakages Linus reported
  against the v3.12 pull request should now be resolved - please
  (re-)report any remaining annoyances or bugs.

  Main changes on the perf kernel side:

   * Performance optimizations:
      . perf ring-buffer code optimizations,          by Peter Zijlstra
      . perf ring-buffer code optimizations,          by Oleg Nesterov
      . x86 NMI call-stack processing optimizations,  by Peter Zijlstra
      . perf context-switch optimizations,            by Peter Zijlstra
      . perf sampling speedups,                       by Peter Zijlstra
      . x86 Intel PEBS processing speedups,           by Peter Zijlstra

   * Enhanced hardware support:
      . for Intel Ivy Bridge-EP uncore PMUs,          by Zheng Yan
      . for Haswell transactions,                     by Andi Kleen, Peter Zijlstra

   * Core perf events code enhancements and fixes by Oleg Nesterov:
      . for uprobes, if fork() is called with pending ret-probes
      . for uprobes platform support code

   * New ABI details by Andi Kleen:
      . Report x86 Haswell TSX transaction abort cost as weight

  Main changes on the perf tooling side (some of these tooling changes
  utilize the above kernel side changes):

   * 'perf report/top' enhancements:

      . Convert callchain children list to rbtree, greatly reducing the
        time taken for callchain processing, from Namhyung Kim.

      . Add new COMM infrastructure, further improving histogram
        processing, from Frédéric Weisbecker, one fix from Namhyung Kim.

      . Add /proc/kcore based live-annotation improvements, including
        build-id cache support, multi map 'call' instruction navigation
        fixes, kcore address validation, objdump workarounds.  From
        Adrian Hunter.

      . Show progress on histogram collapsing, that can take a long
        time, from Namhyung Kim.

      . Add --max-stack option to limit callchain stack scan in 'top'
        and 'report', improving callchain processing when reducing the
        stack depth is an option, from Waiman Long.

      . Add new option --ignore-vmlinux for perf top, from Willy
        Tarreau.

   * 'perf trace' enhancements:

      . 'perf trace' now can can use a 'perf probe' dynamic tracepoints
        to hook into the userspace -> kernel pathname copy so that it
        can map fds to pathnames without reading /proc/pid/fd/ symlinks.
        From Arnaldo Carvalho de Melo.

      . Show VFS path associated with fd in live sessions, using a
        'vfs_getname' 'perf probe' created dynamic tracepoint or by
        looking at /proc/pid/fd, from Arnaldo Carvalho de Melo.

      . Add 'trace' beautifiers for lots of syscall arguments, from
        Arnaldo Carvalho de Melo.

      . Implement more compact 'trace' output by suppressing zeroed
        args, from Arnaldo Carvalho de Melo.

      . Show thread COMM by default in 'trace', from Arnaldo Carvalho de
        Melo.

      . Add option to show full timestamp in 'trace', from David Ahern.

      . Add 'record' command in 'trace', to record raw_syscalls:*, from
        David Ahern.

      . Add summary option to dump syscall statistics in 'trace', from
        David Ahern.

      . Improve error messages in 'trace', providing hints about system
        configuration steps needed for using it, from Ramkumar
        Ramachandra.

      . 'perf trace' now emits hints as to why tracing is not possible,
        helping the user to setup the system to allow tracing in the
        desired permission granularity, telling if the problem is due to
        debugfs not being mounted or with not enough permission for
        !root, /proc/sys/kernel/perf_event_paranoit value, etc.  From
        Arnaldo Carvalho de Melo.

   * 'perf record' enhancements:

      . Check maximum frequency rate for record/top, emitting better
        error messages, from Jiri Olsa.

      . 'perf record' code cleanups, from David Ahern.

      . Improve write_output error message in 'perf record', from Adrian
        Hunter.

      . Allow specifying B/K/M/G unit to the --mmap-pages arguments,
        from Jiri Olsa.

      . Fix command line callchain attribute tests to handle the new
        -g/--call-chain semantics, from Arnaldo Carvalho de Melo.

   * 'perf kvm' enhancements:

      . Disable live kvm command if timerfd is not supported, from David
        Ahern.

      . Fix detection of non-core features, from David Ahern.

   * 'perf list' enhancements:

      . Add usage to 'perf list', from David Ahern.

      . Show error in 'perf list' if tracepoints not available, from
        Pekka Enberg.

   * 'perf probe' enhancements:

      . Support "$vars" meta argument syntax for local variables,
        allowing asking for all possible variables at a given probe
        point to be collected when it hits, from Masami Hiramatsu.

   * 'perf sched' enhancements:

      . Address the root cause of that 'perf sched' stack initialization
        build slowdown, by programmatically setting a big array after
        moving the global variable back to the stack.  Fix from Adrian
        Hunter.

   * 'perf script' enhancements:

      . Set up output options for in-stream attributes, from Adrian
        Hunter.

      . Print addr by default for BTS in 'perf script', from Adrian
        Juntmer

   * 'perf stat' enhancements:

      . Improved messages when doing profiling in all or a subset of
        CPUs using a workload as the session delimitator, as in:

         'perf stat --cpu 0,2 sleep 10s'

        from Arnaldo Carvalho de Melo.

      . Add units to nanosec-based counters in 'perf stat', from David
        Ahern.

      . Remove bogus info when using 'perf stat' -e cycles/instructions,
        from Ramkumar Ramachandra.

   * 'perf lock' enhancements:

      . 'perf lock' fixes and cleanups, from Davidlohr Bueso.

   * 'perf test' enhancements:

      . Fixup PERF_SAMPLE_TRANSACTION handling in sample synthesizing
        and 'perf test', from Adrian Hunter.

      . Clarify the "sample parsing" test entry, from Arnaldo Carvalho
        de Melo.

      . Consider PERF_SAMPLE_TRANSACTION in the "sample parsing" test,
        from Arnaldo Carvalho de Melo.

      . Memory leak fixes in 'perf test', from Felipe Pena.

   * 'perf bench' enhancements:

      . Change the procps visible command-name of invididual benchmark
        tests plus cleanups, from Ingo Molnar.

   * Generic perf tooling infrastructure/plumbing changes:

      . Separating data file properties from session, code
        reorganization from Jiri Olsa.

      . Fix version when building out of tree, as when using one of
        these:

        $ make help | grep perf
          perf-tar-src-pkg    - Build perf-3.12.0.tar source tarball
          perf-targz-src-pkg  - Build perf-3.12.0.tar.gz source tarball
          perf-tarbz2-src-pkg - Build perf-3.12.0.tar.bz2 source tarball
          perf-tarxz-src-pkg  - Build perf-3.12.0.tar.xz source tarball
        $

        from David Ahern.

      . Enhance option parse error message, showing just the help lines
        of the options affected, from Namhyung Kim.

      . libtraceevent updates from upstream trace-cmd repo, from Steven
        Rostedt.

      . Always use perf_evsel__set_sample_bit to set sample_type, from
        Adrian Hunter.

      . Memory and mmap leak fixes from Chenggang Qin.

      . Assorted build fixes for from David Ahern and Jiri Olsa.

      . Speed up and prettify the build system, from Ingo Molnar.

      . Implement addr2line directly using libbfd, from Roberto Vitillo.

      . Separate the GTK support in a separate libperf-gtk.so DSO, that
        is only loaded when --gtk is specified, from Namhyung Kim.

      . perf bash completion fixes and improvements from Ramkumar
        Ramachandra.

      . Support for Openembedded/Yocto -dbg packages, from Ricardo
        Ribalda Delgado.

  And lots and lots of other fixes and code reorganizations that did not
  make it into the list, see the shortlog, diffstat and the Git log for
  details!"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (300 commits)
  uprobes: Fix the memory out of bound overwrite in copy_insn()
  uprobes: Fix the wrong usage of current->utask in uprobe_copy_process()
  perf tools: Remove unneeded include
  perf record: Remove post_processing_offset variable
  perf record: Remove advance_output function
  perf record: Refactor feature handling into a separate function
  perf trace: Don't relookup fields by name in each sample
  perf tools: Fix version when building out of tree
  perf evsel: Ditch evsel->handler.data field
  uprobes: Export write_opcode() as uprobe_write_opcode()
  uprobes: Introduce arch_uprobe->ixol
  uprobes: Kill module_init() and module_exit()
  uprobes: Move function declarations out of arch
  perf/x86/intel: Add Ivy Bridge-EP uncore IRP box support
  perf/x86/intel/uncore: Add filter support for IvyBridge-EP QPI boxes
  perf: Factor out strncpy() in perf_event_mmap_event()
  tools/perf: Add required memory barriers
  perf: Fix arch_perf_out_copy_user default
  perf: Update a stale comment
  perf: Optimize perf_output_begin() -- address calculation
  ...