Fix potential dereference of ERR_PTR @tlink as reported by kernel test
robot

  fs/smb/client/connect.c:2775 cifs_match_super() error: 'tlink'
  dereferencing possible ERR_PTR()

Link: https://lore.kernel.org/all/202306170124.CtQqzf0I-lkp@intel.com/Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

We print most other mount options for a mount when dumping
the mount entries. But miss out the nosharesock value.
This change will print that in addition to the other options.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

In case if all existing file handles are deferred handles and if all of
them gets closed due to handle lease break then we dont need to send
lease break acknowledgment to server, because last handle close will be
considered as lease break ack.
After closing deferred handels, we check for openfile list of inode,
if its empty then we skip sending lease break ack.

Fixes: 59a556ae ("SMB3: drop reference to cfile before sending oplock break")
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Pull SCSI fixes from James Bottomley:
 "Four fixes, all in drivers: three fairly obvious small ones and a
  large one in aacraid to add block queue completion mapping and fix a
  CPU offline hang"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: lpfc: Fix incorrect big endian type assignment in bsg loopback path
  scsi: target: core: Fix error path in target_setup_session()
  scsi: storvsc: Always set no_report_opcodes
  scsi: aacraid: Reply queue mapping to CPUs based on IRQ affinity

Pull ata fix from Damien Le Moal:

 - Avoid deadlocks on resume from sleep by delaying scsi rescan until
   the scsi device is also fully resumed.

* tag 'ata-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: libata-scsi: Avoid deadlock on rescan after device resume

Pull parisc fix from Helge Deller:

 - Drop redundant register definitions to fix build with latest binutils

* tag 'parisc-for-6.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Delete redundant register definitions in <asm/assembly.h>

The error unrolling was leaving the VMAs detached in many cases and
leaving the locked_vm statistic altered, and skipping the unrolling
entirely in the case of the vma tree write failing.

Fix the error path by re-attaching the detached VMAs and adding the
necessary goto for the failed vma tree write, and fix the locked_vm
statistic by only updating after the vma tree write succeeds.

Fixes: 763ecb03 ("mm: remove the vma linked list")
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When an ATA port is resumed from sleep, the port is reset and a power
management request issued to libata EH to reset the port and rescanning
the device(s) attached to the port. Device rescanning is done by
scheduling an ata_scsi_dev_rescan() work, which will execute
scsi_rescan_device().

However, scsi_rescan_device() takes the generic device lock, which is
also taken by dpm_resume() when the SCSI device is resumed as well. If
a device rescan execution starts before the completion of the SCSI
device resume, the rcu locking used to refresh the cached VPD pages of
the device, combined with the generic device locking from
scsi_rescan_device() and from dpm_resume() can cause a deadlock.

Avoid this situation by changing struct ata_port scsi_rescan_task to be
a delayed work instead of a simple work_struct. ata_scsi_dev_rescan() is
modified to check if the SCSI device associated with the ATA device that
must be rescanned is not suspended. If the SCSI device is still
suspended, ata_scsi_dev_rescan() returns early and reschedule itself for
execution after an arbitrary delay of 5ms.
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reported-by: Joe Breuer <linux-kernel@jmbreuer.net>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217530
Fixes: a19a93e4 ("scsi: core: pm: Rely on the device driver core for async power management")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Joe Breuer <linux-kernel@jmbreuer.net>

Pull staging driver fix from Greg KH:
 "Here is a single staging driver "fix" for 6.4-rc7. I've been sitting
  on it in my tree for many weeks as it is just a simple documentation
  update, with the hope that maybe some other staging driver fixes would
  need to be merged for 6.4-final, but that does not seem to be the
  case.

  So please, pull in this one documentation update so that Aaro doesn't
  get emails going forward that he can't do anything about"

* tag 'staging-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: octeon: delete my name from TODO contact

Pull USB / Thunderbolt fixes from Greg KH:
 "Here are some small USB and Thunderbolt driver fixes and new device
  ids for 6.4-rc7 to resolve some reported problems. Included in here
  are:

   - new USB serial device ids

   - USB gadget core fixes for long-dissussed problems

   - dwc3 bugfixes for reported issues.

   - typec driver fixes

   - thunderbolt driver fixes

  All of these have been in linux-next this week with no reported issues"

* tag 'usb-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: gadget: udc: core: Prevent soft_connect_store() race
  usb: gadget: udc: core: Offload usb_udc_vbus_handler processing
  usb: typec: Fix fast_role_swap_current show function
  usb: typec: ucsi: Fix command cancellation
  USB: dwc3: fix use-after-free on core driver unbind
  USB: dwc3: qcom: fix NULL-deref on suspend
  usb: dwc3: gadget: Reset num TRBs before giving back the request
  usb: gadget: udc: renesas_usb3: Fix RZ/V2M {modprobe,bind} error
  USB: serial: option: add Quectel EM061KGL series
  thunderbolt: Mask ring interrupt on Intel hardware as well
  thunderbolt: Do not touch CL state configuration during discovery
  thunderbolt: Increase DisplayPort Connection Manager handshake timeout
  thunderbolt: dma_test: Use correct value for absent rings when creating paths

Pull serial driver fixes from Greg KH:
 "Here are two small serial driver fixes for 6.4-rc7 that resolve some
  reported problems:

   - lantiq serial driver irq fix

   - fsl_lpuart serial driver watermark fix

  Both of these have been in linux-next this week with no reported issues"

* tag 'tty-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: serial: fsl_lpuart: reduce RX watermark to 0 on LS1028A
  serial: lantiq: add missing interrupt ack

We define sp and ipsw in <asm/asmregs.h> using ".reg", and when using
current binutils (snapshot 2.40.50.20230611) the definitions in
<asm/assembly.h> using "=" conflict with those:

arch/parisc/include/asm/assembly.h: Assembler messages:
arch/parisc/include/asm/assembly.h:93: Error: symbol `sp' is already defined
arch/parisc/include/asm/assembly.h:95: Error: symbol `ipsw' is already defined

Delete the duplicate definitions in <asm/assembly.h>.

Also delete the definition of gp, which isn't used anywhere.
Signed-off-by: Ben Hutchings <benh@debian.org>
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Helge Deller <deller@gmx.de>

Pull clk fixes from Stephen Boyd:
 "A handful of clk driver fixes:

   - Fix an OOB issue in the Mediatek mt8365 driver where arrays of clks
     are mismatched in size

   - Use the proper clk_ops for a few clks in the Mediatek mt8365 driver

   - Stop using abs() in clk_composite_determine_rate() because 64-bit
     math goes wrong on large unsigned long numbers that are subtracted
     and passed into abs()

   - Zero initialize a struct clk_init_data in clk-loongson2 to avoid
     stack junk confusing clk_hw_register()

   - Actually use a pointer to __iomem for writel() in
     pxa3xx_clk_update_accr() so we don't oops"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: pxa: fix NULL pointer dereference in pxa3xx_clk_update_accr
  clk: clk-loongson2: Zero init clk_init_data
  clk: mediatek: mt8365: Fix inverted topclk operations
  clk: composite: Fix handling of high clock rates
  clk: mediatek: mt8365: Fix index issue

Pull drm fixes from Dave Airlie:
 "A bunch of misc fixes across the board.

  amdgpu is the usual bulk with a revert and other fixes, nouveau has a
  race fix that was causing a UAF that was hard hanging systems,
  otherwise some qaic, bridge and radeon.

  amdgpu:
   - GFX9 preemption fixes
   - Add missing radeon secondary PCI ID
   - vblflash fixes
   - SMU 13 fix
   - VCN 4.0 fix
   - Re-enable TOPDOWN flag for large BAR systems to fix regression
   - eDP fix
   - PSR hang fix
   - DPIA fix

  radeon:
   - fbdev client warning fix

  qaic:
   - leak fix
   - null ptr deref fix

  nouveau:
   - use-after-free caused by fence race fix
   - runtime pm fix
   - NULL ptr checks

  bridge:
   - ti-sn65dsi86: Avoid possible buffer overflow"

* tag 'drm-fixes-2023-06-17' of git://anongit.freedesktop.org/drm/drm: (21 commits)
  nouveau: fix client work fence deletion race
  drm/amd/display: limit DPIA link rate to HBR3
  drm/amd/display: fix the system hang while disable PSR
  drm/amd/display: edp do not add non-edid timings
  Revert "drm/amdgpu: remove TOPDOWN flags when allocating VRAM in large bar system"
  drm/amdgpu: vcn_4_0 set instance 0 init sched score to 1
  drm/radeon: Disable outputs when releasing fbdev client
  drm/amd/pm: workaround for compute workload type on some skus
  drm/amd: Tighten permissions on VBIOS flashing attributes
  drm/amd: Make sure image is written to trigger VBIOS image update flow
  drm/amdgpu: add missing radeon secondary PCI ID
  drm/amdgpu: Implement gfx9 patch functions for resubmission
  drm/amdgpu: Modify indirect buffer packages for resubmission
  drm/amdgpu: Program gds backup address as zero if no gds allocated
  drm/nouveau: add nv_encoder pointer check for NULL
  drm/amdgpu: Reset CP_VMID_PREEMPT after trailing fence signaled
  drm/nouveau/dp: check for NULL nv_connector->native_mode
  drm/bridge: ti-sn65dsi86: Avoid possible buffer overflow
  drm/nouveau: don't detect DSM for non-NVIDIA device
  accel/qaic: Fix NULL pointer deref in qaic_destroy_drm_device()
  ...

In the same spirit as commit ca57f022 ("afs: Fix fileserver probe
RTT handling"), don't rule out using a vlserver just because there
haven't been enough packets yet to calculate a real rtt.  Always set the
server's probe rtt from the estimate provided by rxrpc_kernel_get_srtt,
which is capped at 1 second.

This could lead to EDESTADDRREQ errors when accessing a cell for the
first time, even though the vl servers are known and have responded to a
probe.

Fixes: 1d4adfaf ("rxrpc: Make rxrpc_kernel_get_srtt() indicate validity")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Link: http://lists.infradead.org/pipermail/linux-afs/2023-June/006746.htmlSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drm-misc-fixes maybe in time for v6.4-rc7:
- qaic leak and null deref fix.
- Fix runtime pm in nouveau.
- Fix array overflow in ti-sn65dsi86 pwm chip handling.
- Assorted null check fixes in nouveau.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <dev@lankhorst.se>
Link: https://patchwork.freedesktop.org/patch/msgid/641eb8a8-fbd7-90ad-0805-310b7fec9344@lankhorst.se

Pull btrfs fixes from David Sterba:
 "Two fixes for NOCOW files, a regression fix in scrub and an assertion
  fix:

   - NOCOW fixes:
      - keep length of iomap direct io request in case of a failure
      - properly pass mode of extent reference checking, this can break
        some cases for swapfile

   - fix error value confusion when scrubbing a stripe

   - convert assertion to a proper error handling when loading global
     roots, reported by syzbot"

* tag 'for-6.4-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: scrub: fix a return value overwrite in scrub_stripe()
  btrfs: do not ASSERT() on duplicated global roots
  btrfs: can_nocow_file_extent should pass down args->strict from callers
  btrfs: fix iomap_begin length for nocow writes

Pull block fix from Jens Axboe:
 "Just a single fix for blk-cg stats flushing"

* tag 'block-6.4-2023-06-15' of git://git.kernel.dk/linux:
  blk-cgroup: Flush stats before releasing blkcg_gq

Pull io_uring fixes from Jens Axboe:
 "A fix for sendmsg with CMSG, and the followup fix discussed for
  avoiding touching task->worker_private after the worker has started
  exiting"

* tag 'io_uring-6.4-2023-06-15' of git://git.kernel.dk/linux:
  io_uring/io-wq: clear current->worker_private on exit
  io_uring/net: save msghdr->msg_control for retries

Pull sound fixes from Takashi Iwai:
 "Just a few small fixes. The only change to the core code is for a
  minor race in ALSA OSS sequencer, and the rest are all device-specific
  fixes (regression fixes and a usual quirk)"

* tag 'sound-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: Add quirk flag for HEM devices to enable native DSD playback
  ALSA: usb-audio: Fix broken resume due to UAC3 power state
  ALSA: seq: oss: Fix racy open/close of MIDI devices
  ASoC: tegra: Fix Master Volume Control
  ALSA: hda/realtek: Add a quirk for Compaq N14JP6
  firmware: cs_dsp: Log correct region name in bin error messages

Merge tag 'urgent-rcu.2023.06.11a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu

Pull RCU fix from Paul McKenney:
 "This fixes a spinlock-initialization regression in SRCU that causes
  the SRCU notifier to fail.

  The fix simply adds the initialization, but introduces a #ifdef
  because there is no spinlock to initialize for the Tiny SRCU used in
  !SMP builds.

  Yes, it would be nice to abstract this somehow in order to hide it in
  SRCU, but I still don't see a good way of doing this"

* tag 'urgent-rcu.2023.06.11a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  notifier: Initialize new struct srcu_usage field

Pull RISC-V fix from Palmer Dabbelt:

 - A documentation patch describing how we use patchwork

* tag 'riscv-for-linus-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  Documentation: RISC-V: patch-acceptance: mention patchwork's role

Merge tag 'asoc-fix-v6.4-rc6-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.4

A couple more fixes for v6.4, one fixing a misleading error log and
another stopping us seeing spurious failures setting the master volume
on some Tegra systems introduced by a change to how we calculate delay
times.

This commit adds new DEVICE_FLG with QUIRK_FLAG_DSD_RAW and Vendor Id for
HEM devices which supports native DSD. Prior to this change Linux kernel
was not enabling native DSD playback for HEM devices, and as a result,
DSD audio was being converted to PCM "on the fly". HEM devices,
when connected to the system, would only play audio in PCM format,
even if the source material was in DSD format. With the addition of new
VENDOR_FLG in the quircks.c file, the devices are now correctly
recognized, and raw DSD data is transmitted to the device,
allowing for native DSD playback.
Signed-off-by: Lukasz Tyl <ltyl@hem-e.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230614122524.30271-1-ltyl@hem-e.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

As reported in the bugzilla below, the PM resume of a UAC3 device may
fail due to the incomplete power state change, stuck at D1.  The
reason is that the driver expects the full D0 power state change only
at hw_params, while the normal PCM resume procedure doesn't call
hw_params.

For fixing the bug, we add the same power state update to D0 at the
prepare callback, which is certainly called by the resume procedure.

Note that, with this change, the power state change in the hw_params
becomes almost redundant, since snd_usb_hw_params() doesn't touch the
parameters (at least it tires so).  But dropping it is still a bit
risky (e.g. we have the media-driver binding), so I leave the D0 power
state change in snd_usb_hw_params() as is for now.

Fixes: a0a4959e ("ALSA: usb-audio: Operate UAC3 Power Domains in PCM callbacks")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217539
Link: https://lore.kernel.org/r/20230612132818.29486-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Although snd_seq_oss_midi_open() and snd_seq_oss_midi_close() can be
called concurrently from different code paths, we have no proper data
protection against races.  Introduce open_mutex to each seq_oss_midi
object for avoiding the races.
Reported-by: "Gong, Sishuai" <sishuai@purdue.edu>
Closes: https://lore.kernel.org/r/7DC9AF71-F481-4ABA-955F-76C535661E33@purdue.edu
Link: https://lore.kernel.org/r/20230612125533.27461-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from wireless, and netfilter.

  Selftests excluded - we have 58 patches and diff of +442/-199, which
  isn't really small but perhaps with the exception of the WiFi locking
  change it's old(ish) bugs.

  We have no known problems with v6.4.

  The selftest changes are rather large as MPTCP folks try to apply
  Greg's guidance that selftest from torvalds/linux should be able to
  run against stable kernels.

  Last thing I should call out is the DCCP/UDP-lite deprecation notices.
  We are fairly sure those are dead, but if we're wrong reverting them
  back in won't be fun.

  Current release - regressions:

   - wifi:
      - cfg80211: fix double lock bug in reg_wdev_chan_valid()
      - iwlwifi: mvm: spin_lock_bh() to fix lockdep regression

  Current release - new code bugs:

   - handshake: remove fput() that causes use-after-free

  Previous releases - regressions:

   - sched: cls_u32: fix reference counter leak leading to overflow

   - sched: cls_api: fix lockup on flushing explicitly created chain

  Previous releases - always broken:

   - nf_tables: integrate pipapo into commit protocol

   - nf_tables: incorrect error path handling with NFT_MSG_NEWRULE, fix
     dangling pointer on failure

   - ping6: fix send to link-local addresses with VRF

   - sched: act_pedit: parse L3 header for L4 offset, the skb may not
     have the offset saved

   - sched: act_ct: fix promotion of offloaded unreplied tuple

   - sched: refuse to destroy an ingress and clsact Qdiscs if there are
     lockless change operations in flight

   - wifi: mac80211: fix handful of bugs in multi-link operation

   - ipvlan: fix bound dev checking for IPv6 l3s mode

   - eth: enetc: correct the indexes of highest and 2nd highest TCs

   - eth: ice: fix XDP memory leak when NIC is brought up and down

  Misc:

   - add deprecation notices for UDP-lite and DCCP

   - selftests: mptcp: skip tests not supported by old kernels

   - sctp: handle invalid error codes without calling BUG()"

* tag 'net-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits)
  dccp: Print deprecation notice.
  udplite: Print deprecation notice.
  octeon_ep: Add missing check for ioremap
  selftests/ptp: Fix timestamp printf format for PTP_SYS_OFFSET
  net: ethernet: stmicro: stmmac: fix possible memory leak in __stmmac_open
  net: tipc: resize nlattr array to correct size
  sfc: fix XDP queues mode with legacy IRQ
  net: macsec: fix double free of percpu stats
  net: lapbether: only support ethernet devices
  MAINTAINERS: add reviewers for SMC Sockets
  s390/ism: Fix trying to free already-freed IRQ by repeated ism_dev_exit()
  net: dsa: felix: fix taprio guard band overflow at 10Mbps with jumbo frames
  net/sched: cls_api: Fix lockup on flushing explicitly created chain
  ice: Fix ice module unload
  net/handshake: remove fput() that causes use-after-free
  selftests: forwarding: hw_stats_l3: Set addrgenmode in a separate step
  net/sched: qdisc_destroy() old ingress and clsact Qdiscs before grafting
  net/sched: Refactor qdisc_graft() for ingress and clsact Qdiscs
  net/sched: act_ct: Fix promotion of offloaded unreplied tuple
  wifi: iwlwifi: mvm: spin_lock_bh() to fix lockdep regression
  ...

Merge tag 'loongarch-fixes-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:
 "Some trivial bug fixes for v6.4-rc7"

* tag 'loongarch-fixes-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: Fix debugfs_create_dir() error checking
  LoongArch: Avoid uninitialized alignment_mask
  LoongArch: Fix perf event id calculation
  LoongArch: Fix the write_fcsr() macro
  LoongArch: Let pmd_present() return true when splitting pmd

Merge tag 'for-6.4/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Fix DM thinp discard performance regression introduced during this
   merge window where DM core was splitting large discards every 128K
   (max_sectors_kb) rather than every 64M (discard_max_bytes).

 - Extend DM core LOCKFS fix, made during 6.4 merge, to also fix race
   between do_mount and dm's do_suspend (in addition to the earlier
   fix's do_mount race with dm's do_resume).

 - Fix DM thin metadata operations to first check if the thin-pool is in
   "fail_io" mode; otherwise UAF can occur.

 - Fix DM thinp's call to __blkdev_issue_discard to use GFP_NOIO rather
   than GFP_NOWAIT (__blkdev_issue_discard cannot handle NULL return
   from bio_alloc).

* tag 'for-6.4/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm: use op specific max_sectors when splitting abnormal io
  dm thin: fix issue_discard to pass GFP_NOIO to __blkdev_issue_discard
  dm thin metadata: check fail_io before using data_sm
  dm: don't lock fs when the map is NULL during suspend or resume

Pull rdma fixes from Jason Gunthorpe:
 "This is an unusually large bunch of bug fixes for the later rc cycle,
  rxe and mlx5 both dumped a lot of things at once. rxe continues to fix
  itself, and mlx5 is fixing a bunch of "queue counters" related bugs.

  There is one highly notable bug fix regarding the qkey. This small
  security check was missed in the original 2005 implementation and it
  allows some significant issues.

  Summary:

   - Two rtrs bug fixes for error unwind bugs

   - Several rxe bug fixes:
      * Incorrect Rx packet validation
      * Using memory without a refcount
      * Syzkaller found use before initialization
      * Regression fix for missing locking with the tasklet conversion
        from this merge window

   - Have bnxt report the correct link properties to userspace, this was
     a regression in v6.3

   - Several mlx5 bug fixes:
      * Kernel crash triggerable by userspace for the RAW ethernet
        profile
      * Defend against steering refcounting issues created by userspace
      * Incorrect change of QP port affinity parameters in some LAG
        configurations

   - Fix mlx5 Q counters:
      * Do not over allocate Q counters to allow userspace to use the
        full port capacity
      * Kernel crash triggered by eswitch due to mis-use of Q counters
      * Incorrect mlx5_device for Q counters in some LAG configurations

   - Properly implement the IBA spec restricting privileged qkeys to
     root

   - Always an error when reading from a disassociated device's event
     queue

   - isert bug fixes:
      * Avoid a deadlock with the CM handler and CM ID destruction
      * Correct list corruption due to incorrect locking
      * Fix a use after free around connection tear down"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/rxe: Fix rxe_cq_post
  IB/isert: Fix incorrect release of isert connection
  IB/isert: Fix possible list corruption in CMA handler
  IB/isert: Fix dead lock in ib_isert
  RDMA/mlx5: Fix affinity assignment
  IB/uverbs: Fix to consider event queue closing also upon non-blocking mode
  RDMA/uverbs: Restrict usage of privileged QKEYs
  RDMA/cma: Always set static rate to 0 for RoCE
  RDMA/mlx5: Fix Q-counters query in LAG mode
  RDMA/mlx5: Remove vport Q-counters dependency on normal Q-counters
  RDMA/mlx5: Fix Q-counters per vport allocation
  RDMA/mlx5: Create an indirect flow table for steering anchor
  RDMA/mlx5: Initiate dropless RQ for RAW Ethernet functions
  RDMA/rxe: Fix the use-before-initialization error of resp_pkts
  RDMA/bnxt_re: Fix reporting active_{speed,width} attributes
  RDMA/rxe: Fix ref count error in check_rkey()
  RDMA/rxe: Fix packet length checks
  RDMA/rtrs: Fix rxe_dealloc_pd warning
  RDMA/rtrs: Fix the last iu->buf leak in err path

Pull spi fixes from Mark Brown:
 "A few more driver specific fixes.

  The DesignWare fix is for an issue introduced by conversion to the
  chip select accessor functions and is pretty important but the other
  two are less severe"

* tag 'spi-fix-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: dw: Replace incorrect spi_get_chipselect with set
  spi: fsl-dspi: avoid SCK glitches with continuous transfers
  spi: cadence-quadspi: Add missing check for dma_set_mask

Merge tag 'regulator-fix-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fix from Mark Brown:
 "The set of regulators described for the Qualcomm PM8550 just seems to
  have been completely wrong and would likely not have worked at all if
  anything tried to actually configure anything except for enabling and
  disabling at runtime"

* tag 'regulator-fix-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: qcom-rpmh: Fix regulators for PM8550

Pull regmap fix from Mark Brown:
 "Another fix for the maple tree cache, Takashi noticed that unlike
  other caches the maple tree cache didn't check for read only registers
  before trying to sync which would result in spurious syncs for read
  only registers where we don't have a default.

  This was due to the check being open coded in the caches, we now check
  in the shared 'does this register need sync' function so that is fixed
  for this and future caches"

* tag 'regmap-fix-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: regcache: Don't sync read-only registers

Pull media fixes from Mauro Carvalho Chehab:
 "A fix for dvb-core to avoid a race condition during DVB board
  registration"

* tag 'media/v6.4-6' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  Revert "media: dvb-core: Fix use-after-free on race condition at dvb_frontend"

This seems to have existed for ever but is now more apparant after
commit 9bff18d1 ("drm/ttm: use per BO cleanup workers")

My analysis: two threads are running, one in the irq signalling the
fence, in dma_fence_signal_timestamp_locked, it has done the
DMA_FENCE_FLAG_SIGNALLED_BIT setting, but hasn't yet reached the
callbacks.

The second thread in nouveau_cli_work_ready, where it sees the fence is
signalled, so then puts the fence, cleanups the object and frees the
work item, which contains the callback.

Thread one goes again and tries to call the callback and causes the
use-after-free.

Proposed fix: lock the fence signalled check in nouveau_cli_work_ready,
so either the callbacks are done or the memory is freed.
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Fixes: 11e451e7 ("drm/nouveau: remove fence wait code from deferred client work handler")
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/dri-devel/20230615024008.1600281-1-airlied@gmail.com/

Merge tag 'amd-drm-fixes-6.4-2023-06-14' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.4-2023-06-14:

amdgpu:
- GFX9 preemption fixes
- Add missing radeon secondary PCI ID
- vblflash fixes
- SMU 13 fix
- VCN 4.0 fix
- Re-enable TOPDOWN flag for large BAR systems to fix regression
- eDP fix
- PSR hang fix
- DPIA fix

radeon:
- fbdev client warning fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615024011.7773-1-alexander.deucher@amd.com

Pull ext4 fixes from Ted Ts'o:
 "Fix two regressions in ext4, one report by syzkaller[1], and reported
  by multiple users (and tracked by regzbot[2])"

[1] https://syzkaller.appspot.com/bug?extid=4acc7d910e617b360859
[2] https://linux-regtracking.leemhuis.info/regzbot/regression/ZIauBR7YiV3rVAHL@glitch/

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: drop the call to ext4_error() from ext4_get_group_info()
  Revert "ext4: remove unnecessary check in ext4_bg_num_gdb_nometa"

Pull smb client fixes from Steve French:
 "Eight, mostly small, smb3 client fixes:

   - important fix for deferred close oops (race with unmount) found
     with xfstest generic/098 to some servers

   - important reconnect fix

   - fix problem with max_credits mount option

   - two multichannel (interface related) fixes

   - one trivial removal of confusing comment

   - two small debugging improvements (to better spot crediting
     problems)"

* tag '6.4-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: add a warning when the in-flight count goes negative
  cifs: fix lease break oops in xfstest generic/098
  cifs: fix max_credits implementation
  cifs: fix sockaddr comparison in iface_cmp
  smb/client: print "Unknown" instead of bogus link speed value
  cifs: print all credit counters in DebugData
  cifs: fix status checks in cifs_tree_connect
  smb: remove obsolete comment

Kuniyuki Iwashima says:

====================
udplite/dccp: Print deprecation notice.

UDP-Lite is assumed to have no users for 7 years, and DCCP is
orphaned for 7 years too.

Let's add deprecation notice and see if anyone responds to it.
====================

Link: https://lore.kernel.org/r/20230614194705.90673-1-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>