- 10 Jan, 2006 40 commits
-
-
Christoph Hellwig authored
Turn noatime and nodiratime into per-mount instead of per-sb flags. After all the preparations this is a rather trivial patch. The mount code needs to treat the two options as per-mount instead of per-superblock, and touch_atime needs to be changed to check the new MNT_ flags in addition to the MS_ flags that are kept for filesystems that are always noatime/nodiratime but not user settable anymore. Besides that core code only nfs needed an update because it's leaving atime updates to the server and thus sets the S_NOATIME flag on every inode, but needs to know whether it's a real noatime mount for an getattr optimization. While we're at it I've killed the IS_NOATIME/IS_NODIRATIME macros that were only used by touch_atime. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Christoph Hellwig authored
MS_NOATIME implies MS_NODIRATIME Signed-off-by:
-
Christoph Hellwig authored
MS_RDONLU implies not atime updates at all, no need for the MS_NOATIME and MS_NODIRATIME flags. Signed-off-by:
-
Christoph Hellwig authored
Now that all these entries in the arch ioctl32.c files are gone [1], we can build fs/compat_ioctl.c as a normal object and kill tons of cruft. We need a special do_ioctl32_pointer handler for s390 so the compat_ptr call is done. This is not needed but harmless on all other architectures. Also remove some superflous includes in fs/compat_ioctl.c Tested on ppc64. [1] parisc still had it's PPP handler left, which is not fully correct for ppp and besides that ppp uses the generic SIOCPRIV ioctl so it'd kick in for all netdevice users. We can introduce a proper handler in one of the next patch series by adding a compat_ioctl method to struct net_device but for now let's just kill it - parisc doesn't compile in mainline anyway and I don't want this to block this patchset. Signed-off-by: -
Christoph Hellwig authored
Add a compat_ioctl method to the dasd driver so the last entries in arch/s390/kernel/compat_ioctl.c can go away. Unlike the previous attempt this one does not replace the ioctl method with an unlocked_ioctl method so that the ioctl_by_bdev calls in s390 partition code continue to work. Signed-off-by:
-
Christoph Hellwig authored
This patch implements generic handling of RTC_IRQP_READ32, RTC_IRQP_SET32, RTC_EPOCH_READ32 and RTC_EPOCH_SET32 in fs/compat_ioctl.c. It's based on the x86_64 code which needed a little massaging to be endian-clean. parisc used COMPAT_IOCTL or generic w_long handlers for these whichce is wrong and can't work because the ioctls encode sizeof(unsigned long) in their ioctl number. parisc also duplicated COMPAT_IOCTL entries for other rtc ioctls which I remove in this patch, too. Signed-off-by:
Matthew Wilcox <matthew@wil.cx> Acked-by:
"David S. Miller" <davem@davemloft.net> Signed-off-by:
-
Christoph Hellwig authored
The comment in compat.c is wrong, every architecture provides a get_compat_sigevent() for the IPC compat code already. This basically moves the x86_64 version to common code and removes all the others. Signed-off-by:
Paul Mackerras <paulus@samba.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Acked-by:
Andi Kleen <ak@muc.de> Signed-off-by:
-
Christoph Hellwig authored
The only own ioctl, TAPE390_DISPLAY, is compat_clean, everything else is routed through common translation code. Signed-off-by:
-
Christoph Hellwig authored
These ioctls are definitely not compat clean, but we already have a proper handler in common code, over-riding it in architecture code is counter-productive. Signed-off-by:
-
Christoph Hellwig authored
Again easy because all ioctls are compat clean. Signed-off-by:
-
Adrian Bunk authored
This patch __deprecated_for_modules the lookup_hash() prototype. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Christoph Hellwig authored
All callers use touch_atime now which takes a vfsmount and allows us to implement per-mount noatime. Signed-off-by:
-
Christoph Hellwig authored
After my lookup_hash patch ->d_revalidate always gets a valid struct nameidata passed (unless you use lookup_one_len which autofs4 doesn't), so we can switch it from update_atime to touch_atime. This is a bit of an academic excercise because autofs has a 1:1 vfsmount superblock relation, but I want to get rid of update_atime so filesystems authors can't easily screw up per-mountpoint noatime support. Signed-off-by:
-
Christoph Hellwig authored
To allow various options to work per-mount instead of per-sb we need a struct vfsmount when updating ctime and mtime. This preparation patch replaces the inode_update_time routine with a file_update_atime routine so we can easily get at the vfsmount. (and the file makes more sense in this context anyway). Also get rid of the unused second argument - we always want to update the ctime when calling this routine. Signed-off-by:
-
Christoph Hellwig authored
remove checks now in the VFS XFS has an additional xattr interface through obscure ioctl. it requires raised capabilities but we need to add some read-only/immutable checks anyway Signed-off-by:
-
Christoph Hellwig authored
remove checks now in the VFS Signed-off-by:
-
akpm@osdl.org authored
) From: Christoph Hellwig <hch@lst.de> remove checks now in the VFS Signed-off-by:
-
akpm@osdl.org authored
) From: Christoph Hellwig <hch@lst.de> remove checks now in the VFS Signed-off-by:
-
Christoph Hellwig authored
remove checks now in the VFS Signed-off-by:
-
akpm@osdl.org authored
) From: Christoph Hellwig <hch@lst.de> The xattr code has rather complex permission checks because the rules are very different for different attribute namespaces. This patch moves as much as we can into the generic code. Currently all the major disk based filesystems duplicate these checks, while many minor filesystems or network filesystems lack some or all of them. To do this we need defines for the extended attribute names in common code, I moved them up from JFS which had the nicest defintions. Signed-off-by:
Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by:
-
Christoph Hellwig authored
Add vfs_getxattr, vfs_setxattr and vfs_removexattr helpers for common checks around invocation of the xattr methods. NFSD already was missing some of the checks and there will be more soon. Signed-off-by:
Neil Brown <neilb@suse.de> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by:
-
Maneesh Soni authored
Update the kdump documentation to reflect the changes due to recent kernel config option changes for kexec and kdump. Signed-off-by:
Maneesh Soni <maneesh@in.ibm.com> Signed-off-by:
-
Maneesh Soni authored
I have heard some complaints about people not finding CONFIG_CRASH_DUMP option and also some objections about its dependency on CONFIG_EMBEDDED. The following patch ends that dependency. I thought of hiding it under CONFIG_KEXEC, but CONFIG_PHYSICAL_START could also be used for some reasons other than kexec/kdump and hence left it visible. I will also update the documentation accordingly. o Following patch removes the config dependency of CONFIG_PHYSICAL_START on CONFIG_EMBEDDED. The reason being CONFIG_CRASH_DUMP option for kdump needs CONFIG_PHYSICAL_START which makes CONFIG_CRASH_DUMP depend on CONFIG_EMBEDDED. It is not always obvious for kdump users to choose CONFIG_EMBEDDED. o It also shifts the palce where this option appears, to make it closer to kexec and kdump options. Signed-off-by:
-
akpm@osdl.org authored
) From: Vivek Goyal <vgoyal@in.ibm.com> - In some cases, the number of segments, on a kexec load, exceeds the existing cap of 8. This patch increases the KEXEC_SEGMENT_MAX limit from 8 to 16. Signed-off-by:
Rachita Kothiyal <rachita@in.ibm.com> Signed-off-by:
Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by:
-
Vivek Goyal authored
- Moving the crash_dump.c file to arch dependent part as kmap_atomic_pfn is specific to i386 and highmem may not exist in other archs. - Use ioremap for x86_64 to map the previous kernel memory. - In copy_oldmem_page(), we now directly copy to the user/kernel buffer and avoid the unneccesary copy to a kmalloc'd page. Signed-off-by:
-
Vivek Goyal authored
- Saving the cpu registers of all cpus before booting in to the crash kernel. - crash_setup_regs will save the registers of the cpu on which panic has occured. One of the concerns ppc64 folks raised is that after capturing the register states, one should not pop the current call frame and push new one. Hence it has been inlined. More call frames later get pushed on to stack (machine_crash_shutdown() and machine_kexec()), but one will not want to backtrace those. - Not very sure about the CFI annotations. With this patch I am getting decent backtrace with gdb. Assuming, compiler has generated enough debugging information for crash_kexec(). Coding crash_setup_regs() in pure assembly makes it tricky because then it can not be inlined and we don't want to return back after capturing register states we don't want to pop this call frame. - Saving the non-panicing cpus registers will be done in the NMI handler while shooting down them in machine_crash_shutdown. - Introducing CRASH_DUMP option in Kconfig for x86_64. Signed-off-by:
Murali M Chakravarthy <muralim@in.ibm.com> Signed-off-by:
-
akpm@osdl.org authored
) From: Vivek Goyal <vgoyal@in.ibm.com> - Implementing the machine_crash_shutdown for x86_64 which will be called by crash_kexec (called in case of a panic, sysrq etc.). Here we do things similar to i386. Disable the interrupts, shootdown the cpus and shutdown LAPIC and IOAPIC. Changes in this version: - As the Eric's APIC initialization patches are reverted back, reintroducing LAPIC and IOAPIC shutdown. - Added some comments on CPU hotplug, modified code as suggested by Andi kleen. Signed-off-by:
-
Vivek Goyal authored
- elfcorehdr= specifies the location of elf core header stored by the crashed kernel. This command line option will be passed by the kexec-tools to capture kernel. Changes in this version : - Added more comments in kernel-parameters.txt and in code. Signed-off-by:
-
akpm@osdl.org authored
) From: Vivek Goyal <vgoyal@in.ibm.com> - This patch introduces the memmap option for x86_64 similar to i386. - memmap=exactmap enables setting of an exact E820 memory map, as specified by the user. Changes in this version: - Used e820_end_of_ram() to find the max_pfn as suggested by Andi kleen. - removed PFN_UP & PFN_DOWN macros - Printing the user defined map also. Signed-off-by:
Hariprasad Nellitheertha <nharipra@gmail.com> Signed-off-by:
-
akpm@osdl.org authored
) From: Vivek Goyal <vgoyal@in.ibm.com> crash_setup_regs() is an architecture dependent function which is called in architecture independent section. So every architecture supporting kexec should at least provide a dummy definition of crash_setup_regs() even if crash dumping is not implemented yet, to avoid build failures. Signed-off-by:
-
Vivek Goyal authored
Fixes a compilation warning message in i386 Signed-off-by:
-
Vivek Goyal authored
- If system panics then cpu register states are captured through funciton crash_get_current_regs(). This is not a inline function hence a stack frame is pushed on to the stack and then cpu register state is captured. Later this frame is popped and new frames are pushed (machine_kexec). - In theory this is not very right as we are capturing register states for a frame and that frame is no more valid. This seems to have created back trace problems for ppc64. - This patch fixes it up. The very first thing it does after entering crash_kexec() is to capture the register states. Anyway we don't want the back trace beyond crash_kexec(). crash_get_current_regs() has been made inline - crash_setup_regs() is the top architecture dependent function which should be responsible for capturing the register states as well as to do some architecture dependent tricks. For ex. fixing up ss and esp for i386. crash_setup_regs() has also been made inline to ensure no new call frame is pushed onto stack. Signed-off-by:
-
Vivek Goyal authored
Removes the call to get_cpu() and put_cpu() as it is not required. Signed-off-by:
-
Vivek Goyal authored
- Kexec on panic functionality allocates memory for saving cpu registers in case of system crash event. Address of this allocated memory needs to be exported to user space, which is used by kexec-tools. - Previously, a single /sys/kernel/crash_notes entry was being exported as memory allocated was a single continuous array. Now memory allocation being dyanmic and per cpu based, address of per cpu buffer is exported through "/sys/devices/system/cpu/cpuX/crash_notes" Signed-off-by:
-
Vivek Goyal authored
- In case of system crash, current state of cpu registers is saved in memory in elf note format. So far memory for storing elf notes was being allocated statically for NR_CPUS. - This patch introduces dynamic allocation of memory for storing elf notes. It uses alloc_percpu() interface. This should lead to better memory usage. - Introduced based on Andi Kleen's and Eric W. Biederman's suggestions. - This patch also moves memory allocation for elf notes from architecture dependent portion to architecture independent portion. Now crash_notes is architecture independent. The whole idea is that size of memory to be allocated per cpu (MAX_NOTE_BYTES) can be architecture dependent and allocation of this memory can be architecture independent. Signed-off-by:
-
akpm@osdl.org authored
) From: Vivek Goyal <vgoyal@in.ibm.com> This patch fixes a minor bug based on Andi Kleen's suggestion. asm's can't be broken in this particular case, hence merging them. Signed-off-by:
-
Alexey Dobriyan authored
Do it via Kconfig rather than via #error. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
akpm@osdl.org authored
) From: Brian Gerst <bgerst@didntduck.org> Call sched_setscheduler() directly instead. Signed-off-by:
Brian Gerst <bgerst@didntduck.org> Signed-off-by:
-
akpm@osdl.org authored
) From: Adrian Bunk <bunk@stusta.de> - create one common dump_thread() prototype in kernel.h - dump_thread() is only used in fs/binfmt_aout.c and can therefore be removed on all architectures where CONFIG_BINFMT_AOUT is not available Signed-off-by:
-
Adrian Bunk authored
... CC [M] drivers/char/ipmi/ipmi_msghandler.o drivers/char/ipmi/ipmi_msghandler.c:3301: `proc_ipmi_root' undeclared here (not in a function) drivers/char/ipmi/ipmi_msghandler.c:3301: initializer element is not constant drivers/char/ipmi/ipmi_msghandler.c:3301: (near initialization for `__ksymtab_proc_ipmi_root.value') drivers/char/ipmi/ipmi_msghandler.c:1535: warning: `ipmb_file_read_proc' defined but not used drivers/char/ipmi/ipmi_msghandler.c:1551: warning: `version_file_read_proc' defined but not used drivers/char/ipmi/ipmi_msghandler.c:1561: warning: `stat_file_read_proc' defined but not used ... CC [M] drivers/char/ipmi/ipmi_poweroff.o drivers/char/ipmi/ipmi_poweroff.c: In function `ipmi_poweroff_init': drivers/char/ipmi/ipmi_poweroff.c:616: warning: implicit declaration of function `unregister_sysctl_table' drivers/char/ipmi/ipmi_poweroff.c:616: `ipmi_table_header' undeclared (first use in this function) drivers/char/ipmi/ipmi_poweroff.c:616: (Each undeclared identifier is reported only once drivers/char/ipmi/ipmi_poweroff.c:616: for each function it appears in.) Signed-off-by:
-
