- 10 May, 2018 11 commits
-
-
Brian Foster authored
Freed extents are unconditionally discarded when online discard is enabled. Define XFS_BMAPI_NODISCARD to allow callers to bypass discards when unnecessary. For example, this will be useful for eofblocks trimming. This patch does not change behavior. Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
Dave Chinner authored
It's just a connector between a transaction and a log item. There's a 1:1 relationship between a log item descriptor and a log item, and a 1:1 relationship between a log item descriptor and a transaction. Both relationships are created and terminated at the same time, so why do we even have the descriptor? Replace it with a specific list_head in the log item and a new log item dirtied flag to replace the XFS_LID_DIRTY flag. Signed-Off-By:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> [darrick: fix up deferred agfl intent finish_item use of LID_DIRTY] Reviewed-by:
-
Dave Chinner authored
Just to make sure the item isn't associated with another transaction when we try to reuse it. Signed-Off-By:
-
Dave Chinner authored
xfs_reflink_clear_inode_flag double-joins an inode to a transaction, which is not allowed. Fix that and document that the caller must have already joined it. Signed-Off-By:
-
Dave Chinner authored
xfs_reflink_cancel_cow_range joins an inode twice to the same transaction. This is not allowed, so fix it and document that the callers of xfs_reflink_cancel_cow_blocks() must have already joined the inode to the permanent transaction passed in. Signed-Off-By:
-
Dave Chinner authored
xfs_inactive_symlink_rmt() does something nasty - it joins an inode into a transaction it is already joined to. This means the inode can have multiple log item descriptors attached to the transaction for it. This breaks teh 1:1 mapping that is supposed to exist between the log item and log item descriptor. This results in the log item being processed twice during transaction commit and CIL formatting, and there are lots of other potential issues tha arise from double processing of log items in the transaction commit state machine. In this case, the inode is already held by the rolling transaction returned from xfs_defer_finish(), so there's no need to join it again. Signed-Off-By:
-
Dave Chinner authored
Been hitting AIL ordering assert failures recently, but been unable to trace them down because the system immediately hangs up onteh spinlock that was held when this assert fires: XFS: Assertion failed: XFS_LSN_CMP(prev_lip->li_lsn, lip->li_lsn) <= 0, file: fs/xfs/xfs_trans_ail.c, line: 52 Move the assertions outside of the spinlock so the corpse can be dissected. Thanks to Brian Foster for supplying a clean way of doing this. Signed-Off-By:
-
Dave Chinner authored
So it's clear in the trace where they are being called from. Signed-Off-By:
-
Dave Chinner authored
Because currently we have no idea what the transaction context we are operating in is, and I need to know that information to track down bugs in multiple log item joins to transactions. Signed-Off-By:
-
Dave Chinner authored
The log item flags contain a field that is protected by the AIL lock - the XFS_LI_IN_AIL flag. We use non-atomic RMW operations to set and clear these flags, but most of the updates and checks are not done with the AIL lock held and so are susceptible to update races. Fix this by changing the log item flags to use atomic bitops rather than be reliant on the AIL lock for update serialisation. Signed-Off-By:
-
Darrick J. Wong authored
xfs_rmap_lookup_le_range can return errors, so we need to check for them and bail out. Signed-off-by:
-
- 09 May, 2018 22 commits
-
-
Darrick J. Wong authored
Don't panic() the system if the bmap records are garbage, just call ASSERT which gives us the same backtrace but enables developers to control if the system goes down or not. This makes debugging with generic/388 much easier because it won't reboot the machine midway through a run just because btree_read_bufl returns EIO when the fs has already shut down. Signed-off-by:
-
Brian Foster authored
Directory operations can perform block allocations as entries are added/removed from directories. Defer AGFL block frees from the remaining directory operation transactions. This covers the hard link, remove and rename operations. Signed-off-by:
-
Brian Foster authored
Inode allocation can require block allocation for physical inode chunk allocation, inode btree record insertion, and/or directory block allocation for entry insertion. Any of these block allocation requests can require AGFL fixups prior to the actual allocation. Update the common file creation transacions to defer AGFL frees from these contexts to avoid too much log reservation consumption per-transaction. Since these transactions are already passed down through the btree cursors and da_args structure, this simply requires to attach dfops to the transaction. Note that this covers tr_create, tr_mkdir and tr_symlink. Other transactions such as tr_create_tmpfile do not already make use of deferred operations and so are left alone for the time being. Signed-off-by:
-
Brian Foster authored
XFS inode chunks are already freed via deferred operations (which now also defer AGFL block frees), but inode btree blocks are freed directly in the associated context. This has been known to lead to log reservation overruns in particular workloads where an inobt block free may require several AGFL block frees (and thus several allocation btree modifications) before the inobt block itself is actually freed. To avoid this problem, defer the frees of any AGFL blocks before the inobt block free takes place. This requires passing the dfops from xfs_inactive_ifree() down through the inobt ->[alloc|free]_block() callouts, which essentially only requires to attach the dfops to the transaction since it is already carried all the way through to the inobt update and allocation. Signed-off-by:
-
Brian Foster authored
Now that AGFL block frees are deferred when dfops is set in the transaction, start deferring AGFL block frees from contexts that are known to push the limits of existing log reservations. The first such context is deferred operation processing itself. This primarily targets deferred extent frees (such as file extents and inode chunks), but in doing so covers all allocation operations that occur in deferred operation processing context. Update xfs_defer_finish() to set and reset ->t_agfl_dfops across the processing sequence. This means that any AGFL block frees due to allocation events result in the addition of new EFIs to the dfops rather than being processed immediately. xfs_defer_finish() rolls the transaction at least once more to process the frees of the AGFL blocks back to the allocation btrees and returns once the AGFL is rectified. Signed-off-by:
-
Brian Foster authored
The AGFL fixup code executes before every block allocation/free and rectifies the AGFL based on the current, dynamic allocation requirements of the fs. The AGFL must hold a minimum number of blocks to satisfy a worst case split of the free space btrees caused by the impending allocation operation. The AGFL is also updated to maintain the implicit requirement for a minimum number of free slots to satisfy a worst case join of the free space btrees. Since the AGFL caches individual blocks, AGFL reduction typically involves multiple, single block frees. We've had reports of transaction overrun problems during certain workloads that boil down to AGFL reduction freeing multiple blocks and consuming more space in the log than was reserved for the transaction. Since the objective of freeing AGFL blocks is to ensure free AGFL free slots are available for the upcoming allocation, one way to address this problem is to release surplus blocks from the AGFL immediately but defer the free of those blocks (similar to how file-mapped blocks are unmapped from the file in one transaction and freed via a deferred operation) until the transaction is rolled. This turns AGFL reduction into an operation with predictable log reservation consumption. Add the capability to defer AGFL block frees when a deferred ops list is available to the AGFL fixup code. Add a dfops pointer to the transaction to carry dfops through various contexts to the allocator context. Deferring AGFL frees is conditional behavior based on whether the transaction pointer is populated. The long term objective is to reuse the transaction pointer to clean up all unrelated callchains that pass dfops on the stack along with a transaction and in doing so, consistently defer AGFL blocks from the allocator. A bit of customization is required to handle deferred completion processing because AGFL blocks are accounted against a per-ag reservation pool and AGFL blocks are not inserted into the extent busy list when freed (they are inserted when used and released back to the AGFL). Reuse the majority of the existing deferred extent free infrastructure and customize it appropriately to handle AGFL blocks. Note that this patch only adds infrastructure. It does not change behavior because no callers have been updated to pass ->t_agfl_dfops into the allocation code. Signed-off-by:
-
Brian Foster authored
Refactor the AGFL block free code into a new helper such that it can be invoked from deferred context. No functional changes. Signed-off-by:
-
Eric Sandeen authored
Rather than printing the top of the buffer that held a corrupted dqblk, restructure things to print out the specific one that failed by pushing the calls to the verifier_error function down into the verifier which iterates over the buffer and detects the error. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Reviewed-by:
-
Eric Sandeen authored
Add an xfs_dqblk verifier so that it can check the uuid on V5 filesystems; it calls the existing xfs_dquot_verify verifier to validate the xfs_disk_dquot_t contained inside it. This lets us move the uuid verification out of the crc verifier, which makes little sense. Signed-off-by:
-
Eric Sandeen authored
It's a bit dicey to pass in the smaller xfs_disk_dquot and then cast it to something larger; pass in the full xfs_dqblk so we know the caller has sent us the right thing. Rename the function to xfs_dqblk_repair for clarity. Signed-off-by:
-
Eric Sandeen authored
During quotacheck we send in the quota type, so verify that as well. Signed-off-by:
-
Eric Sandeen authored
Long ago the flags argument was used to determine whether to issue warnings about corruptions, but that's done elsewhere now and the flag is unused here, so remove it. Signed-off-by:
-
Dave Chinner authored
Rather than checking what kind of locking is needed in a helper function and then jumping through hoops to do the locking in line, move the locking to the helper function that does all the checks and rename it to xfs_ilock_for_iomap(). This also allows us to hoist all the nonblocking checks up into the locking helper, further simplifier the code flow in xfs_file_iomap_begin() and making it easier to understand. Signed-Off-By:
Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by:
-
Dave Chinner authored
The current logic that determines whether allocation should be done has grown somewhat spaghetti like with the addition of IOMAP_NOWAIT functionality. Separate out each of the different cases into single, obvious checks to get rid most of the nested IOMAP_NOWAIT checks in the allocation logic. Signed-Off-By:
-
Dave Chinner authored
If we are doing direct IO writes with datasync semantics, we often have to flush metadata changes along with the data write. However, if we are overwriting existing data, there are no metadata changes that we need to flush. In this case, optimising the IO by using FUA write makes sense. We know from the IOMAP_F_DIRTY flag as to whether a specific inode requires a metadata flush - this is currently used by DAX to ensure extent modification as stable in page fault operations. For direct IO writes, we can use it to determine if we need to flush metadata or not once the data is on disk. Hence if we have been returned a mapped extent that is not new and the IO mapping is not dirty, then we can use a FUA write to provide datasync semantics. This allows us to short-cut the generic_write_sync() call in IO completion and hence avoid unnecessary operations. This makes pure direct IO data write behaviour identical to the way block devices use REQ_FUA to provide datasync semantics. On a FUA enabled device, a synchronous direct IO write workload (sequential 4k overwrites in 32MB file) had the following results: # xfs_io -fd -c "pwrite -V 1 -D 0 32m" /mnt/scratch/boo kernel time write()s write iops Write b/w ------ ---- -------- ---------- --------- (no dsync) 4s 2173/s 2173 8.5MB/s vanilla 22s 370/s 750 1.4MB/s patched 19s 420/s 420 1.6MB/s The patched code clearly doesn't send cache flushes anymore, but instead uses FUA (confirmed via blktrace), and performance improves a bit as a result. However, the benefits will be higher on workloads that mix O_DSYNC overwrites with other write IO as we won't be flushing the entire device cache on every DSYNC overwrite IO anymore. Signed-Off-By:
-
Dave Chinner authored
Currently iomap_dio_rw() only handles (data)sync write completions for AIO. This means we can't optimised non-AIO IO to minimise device flushes as we can't tell the caller whether a flush is required or not. To solve this problem and enable further optimisations, make iomap_dio_rw responsible for data sync behaviour for all IO, not just AIO. In doing so, the sync operation is now accounted as part of the DIO IO by inode_dio_end(), hence post-IO data stability updates will no long race against operations that serialise via inode_dio_wait() such as truncate or hole punch. Signed-Off-By:
-
Dave Chinner authored
To prepare for iomap iinfrastructure based DSYNC optimisations. While moving the code araound, move the XFS write bytes metric update for direct IO into xfs_dio_write_end_io callback so that we always capture the amount of data written via AIO+DIO. This fixes the problem where queued AIO+DIO writes are not accounted to this metric. Signed-Off-By:
-
Dave Chinner authored
When looking at an event trace recently, I noticed that non-blocking buffer lookup attempts would fail on cached locked buffers and then run the slow cache-miss path. This means we are doing an xfs_buf allocation, lookup and free unnecessarily every time we avoid blocking on a locked buffer. Fix this by changing _xfs_buf_find() to return an error status to the caller to indicate that we failed the lock attempt rather than just returning a NULL. This allows the higher level code to discriminate between a cache miss and an cache hit that we failed to lock. This also allows us to return a -EFSCORRUPTED state if we are asked to look up a block number outside the range of the filesystem in _xfs_buf_find(), which moves us one step closer to being able to handle such errors in a more graceful manner at the higher levels. Signed-Off-By:
-
Dave Chinner authored
Move xfs_buf_incore out of line and make it the only way to look up a buffer in the buffer cache from outside the buffer cache. Convert the external users of _xfs_buf_find() to xfs_buf_incore() and make _xfs_buf_find() static. Signed-Off-By:
-
Eric Sandeen authored
This will trace i.e. the ATTR_SECURE/ATTR_CREATE/ATTR_REPLACE flags as well as the OP_FLAGS. Signed-off-by:
-
Dave Chinner authored
When we have corrupted free inode btrees, we can attempt to allocate inodes that we know are already allocated. Catch allocation of these inodes and report corruption as early as possible to prevent corruption propagation or deadlocks. Signed-Off-By:
-
Dave Chinner authored
A recent fuzzed filesystem image cached random dcache corruption when the reproducer was run. This often showed up as panics in lookup_slow() on a null inode->i_ops pointer when doing pathwalks. BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 .... Call Trace: lookup_slow+0x44/0x60 walk_component+0x3dd/0x9f0 link_path_walk+0x4a7/0x830 path_lookupat+0xc1/0x470 filename_lookup+0x129/0x270 user_path_at_empty+0x36/0x40 path_listxattr+0x98/0x110 SyS_listxattr+0x13/0x20 do_syscall_64+0xf5/0x280 entry_SYSCALL_64_after_hwframe+0x42/0xb7 but had many different failure modes including deadlocks trying to lock the inode that was just allocated or KASAN reports of use-after-free violations. The cause of the problem was a corrupt INOBT on a v4 fs where the root inode was marked as free in the inobt record. Hence when we allocated an inode, it chose the root inode to allocate, found it in the cache and re-initialised it. We recently fixed a similar inode allocation issue caused by inobt record corruption problem in xfs_iget_cache_miss() in commit ee457001 ("xfs: catch inode allocation state mismatch corruption"). This change adds similar checks to the cache-hit path to catch it, and turns the reproducer into a corruption shutdown situation. Reported-by:
Wen Xu <wen.xu@gatech.edu> Signed-Off-By:
-
- 07 May, 2018 1 commit
-
-
Linus Torvalds authored
-
- 06 May, 2018 6 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pll KVM fixes from Radim Krčmář: "ARM: - Fix proxying of GICv2 CPU interface accesses - Fix crash when switching to BE - Track source vcpu git GICv2 SGIs - Fix an outdated bit of documentation x86: - Speed up injection of expired timers (for stable)" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: remove APIC Timer periodic/oneshot spikes arm64: vgic-v2: Fix proxying of cpuif access KVM: arm/arm64: vgic_init: Cleanup reference to process_maintenance KVM: arm64: Fix order of vcpu_write_sys_reg() arguments KVM: arm/arm64: vgic: Fix source vcpu issues for GICv2 SGI
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull iommu fixes from Joerg Roedel: - fix a compile warning in the AMD IOMMU driver with irq remapping disabled - fix for VT-d interrupt remapping and invalidation size (caused a BUG_ON when trying to invalidate more than 4GB) - build fix and a regression fix for broken graphics with old DTS for the rockchip iommu driver - a revert in the PCI window reservation code which fixes a regression with VFIO. * tag 'iommu-fixes-v4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu: rockchip: fix building without CONFIG_OF iommu/vt-d: Use WARN_ON_ONCE instead of BUG_ON in qi_flush_dev_iotlb() iommu/vt-d: fix shift-out-of-bounds in bug checking iommu/dma: Move PCI window region reservation back into dma specific path. iommu/rockchip: Make clock handling optional iommu/amd: Hide unused iommu_table_lock iommu/vt-d: Fix usage of force parameter in intel_ir_reconfigure_irte()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Thomas Gleixner: "Unbreak the CPUID CPUID_8000_0008_EBX reload which got dropped when the evaluation of physical and virtual bits which uses the same CPUID leaf was moved out of get_cpu_cap()" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Restore CPUID_8000_0008_EBX reload
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull clocksource fixes from Thomas Gleixner: "The recent addition of the early TSC clocksource breaks on machines which have an unstable TSC because in case that TSC is disabled, then the clocksource selection logic falls back to the early TSC which is obviously bogus. That also unearthed a few robustness issues in the clocksource derating code which are addressed as well" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: Rework stale comment clocksource: Consistent de-rate when marking unstable x86/tsc: Fix mark_tsc_unstable() clocksource: Initialize cs->wd_list clocksource: Allow clocksource_mark_unstable() on unregistered clocksources x86/tsc: Always unregister clocksource_tsc_early
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Thomas Gleixner: "A single fix to prevent false positives in the spurious interrupt detector when more than a single demultiplex register is evaluated in the Qualcom irq combiner driver" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/qcom: Fix check for spurious interrupts
-
git://git.infradead.org/linux-platform-drivers-x86Linus Torvalds authored
Pull x86 platform driver fixes from Darren Hart: - We missed a case in the Dell config dependencies resulting in a possible bad configuration, resolve it by giving up on trying to keep DELL_LAPTOP visible in the menu and make it depend on DELL_SMBIOS. - Fix a null pointer dereference at module unload for the asus-wireless driver. * tag 'platform-drivers-x86-v4.17-2' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: Kconfig: Fix dell-laptop dependency chain. platform/x86: asus-wireless: Fix NULL pointer dereference
-
