- 18 Aug, 2023 3 commits
-
-
Ankit Nautiyal authored
The final link bpp used to calculate the m_n values depend on the output_format. Though the output_format is set to RGB for MST case and the link bpp will be same as the pipe bpp, for the sake of semantics, lets calculate the m_n values with the link bpp, instead of pipe_bpp. Signed-off-by:
Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-4-ankit.k.nautiyal@intel.com
-
Ankit Nautiyal authored
Move the check for limiting compressed bits_per_pixel for 420,422 formats in the helper to compute bits_per_pixel. v2: Fix typo in commit message. (Ankit) Signed-off-by:
Arun R Murthy <arun.r.murthy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-3-ankit.k.nautiyal@intel.com
-
Ankit Nautiyal authored
While using DSC the compressed bpp is computed assuming RGB output format. Consider the output_format and compute the compressed bpp during mode valid and compute config steps. For DP-MST we currently use RGB output format only, so continue using RGB while computing compressed bpp for MST case. v2: Use output_bpp instead for pipe_bpp to clamp compressed_bpp. (Ville) Signed-off-by:
-
- 17 Aug, 2023 9 commits
-
-
Matt Roper authored
We don't really need a feature flag for has_4tile since there's a well-defined cutover point (DG2) at which all new platforms started using Tile4 as their Y-major tiling layout. The GT side of the code already handles Tile4 vs legacy TileY with checks on the IP version rather than looking at the feature flag, and we can simplify the display code similarly (which will also make it more self-contained for re-use in the Xe driver). Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
Haridhar Kalvala <haridhar.kalvala@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230810234618.3738870-4-matthew.d.roper@intel.com
-
Matt Roper authored
Rather than picking random tiling formats from a pool that contains both TileY and Tile4 and then trying to replace one with the other depending on the platform, it's simpler to just use a single enum value that represents whatever the platform-appropriate Y-major tiling format is (i.e., Tile4 on Xe_HP and beyond, legacy TileY on earlier platforms). Signed-off-by:
-
Matt Roper authored
All production DG2 cards have display stepping C0 or later. We can drop Wa_14013215631 (only applies to pre-C0) and make Wa_14010547955 unconditional (applies to everything B0 and beyond). Also drop the now-unused IS_DG2_DISPLAY_STEP macro. Bspec: 44477 Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Matt Atwood <matthew.s.atwood@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230816214201.534095-9-matthew.d.roper@intel.com
-
Matt Roper authored
The first production SoC steppings for DG2 were C0 (for G10), B1 (for G11), and A1 (for G12). This corresponds to PCI revision IDs 0x8, 0x5, and 0x1 respectively. Add this information to the driver's pre-production detection. Bspec: 44477 Signed-off-by:
-
Gustavo Sousa authored
According to the BSpec, voltage swing programming should be done for owned PHY lanes. Do not program a not-owned PHY lane. BSpec: 74103, 74104 Reviewed-by:
Mika Kahola <mika.kahola@intel.com> Signed-off-by:
Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by:
-
Gustavo Sousa authored
Display must not enable or disable transmitters for not-owned PHY lanes. BSpec: 64539 Reviewed-by:
-
Gustavo Sousa authored
It is possible to generalize the "disable" value for the transmitters to be a bit mask based on the port width and the port reversal boolean, with a small exception for DP-alt mode with "x1" port width. Simplify the code by using such a mask and a for-loop instead of using switch-case statements. v2: - Use (i < 2) instead of (i / 2 == 0) for PHY lane mask selection. (Jani) BSpec: 64539 Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: -
Gustavo Sousa authored
There are more parts of C10/C20 programming that need to take owned lanes into account. Define the function intel_cx0_get_owned_lane_mask() and use it. There will be new users of that function in upcoming changes. BSpec: 64539 Reviewed-by:
-
Anshuman Gupta authored
System wide suspend already has support for lmem save/restore during suspend therefore enabling d3cold for s2idle and keepng it disable for runtime PM.(Refer below commit for d3cold runtime PM disable justification) 'commit 66eb93e7 ("drm/i915/dgfx: Keep PCI autosuspend control 'on' by default on all dGPU")' It will reduce the DG2 Card power consumption to ~0 Watt for s2idle power KPI. v2: - Added "Cc: stable@vger.kernel.org". Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8755 Cc: stable@vger.kernel.org Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Tested-by:
Aaron Ma <aaron.ma@canonical.com> Tested-by:
Jianshui Yu <Jianshui.yu@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230816125216.1722002-1-anshuman.gupta@intel.com
-
- 16 Aug, 2023 1 commit
-
-
Gustavo Sousa authored
That macro became unused with commit 323286c8 ("drm/i915: Move the power domain->well mappings to intel_display_power_map.c"). Signed-off-by:
-
- 15 Aug, 2023 2 commits
-
-
Alan Previn authored
After recent discussions with Mesa folks, it was requested that we optimize i915's GET_PARAM for the PXP_STATUS without changing the UAPI spec. Add these additional optimizations: - If any PXP initializatoin flow failed, then ensure that we catch it so that we can change the returned PXP_STATUS from "2" (i.e. 'PXP is supported but not yet ready') to "-ENODEV". This typically should not happen and if it does, we have a platform configuration issue. - If a PXP arbitration session creation event failed due to incorrect firmware version or blocking SOC fusing or blocking BIOS configuration (platform reasons that won't change if we retry), then reflect that blockage by also returning -ENODEV in the GET_PARAM:PXP_STATUS. - GET_PARAM:PXP_STATUS should not wait at all if PXP is supported but non-i915 dependencies (component-driver / firmware) we are still pending to complete the init flows. In this case, just return "2" immediately (i.e. 'PXP is supported but not yet ready'). Difference from prio revs: v3: - Rebase with latest tip that has pulled in setting the gsc fw load to fail if proxy init fails. v2: - Use a #define for the default readiness timeout (Vivaik). - Improve comments around the failing of proxy-init. v1: - Change the commit msg style to be imperative. (Jani) - Rename timeout to timeout_ms. (Jani) - Fix is_fw_err_platform_config to use higher order param (pxp) first. (Jani) Signed-off-by:Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by:
Balasubrawmanian, Vivaik <vivaik.balasubrawmanian@intel.com> Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230802182550.1592926-1-alan.previn.teres.alexis@intel.com
-
Alan Previn authored
In the case of failed suspend flow or cases where the kernel does not go into full suspend but goes from suspend_prepare back to resume_complete, we get called for a pm_complete but without runtime_pm guaranteed. Thus, ensure we take the runtime_pm when calling intel_pxp_init_hw from within intel_pxp_resume_complete. v2: resume_complete and runtime_resume should abstract a common helper with different wakeref requirements. (Daniele) Signed-off-by:
-
- 14 Aug, 2023 2 commits
-
-
Arun R Murthy authored
The debug print for enabling SDP CRC16 is applicable only for DP2.0, but this debug print was not within the uhbr check and was always printed. Fix this by adding proper checks and returning. v2: Fix typo in commit message (Ankit) Signed-off-by:
Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Signed-off-by:
-
Suraj Kandpal authored
On checking DSC1.1 Errata and DSC 1.2 spec the current formula we were using was incorrect to calculate first_line_bpg_offset. The new fixed formula is derived from C model. --v2 -Use clamp function in linux/minmax.h [Ankit] --v3 -remove linux/minmax.h header Signed-off-by:
Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by:
-
- 11 Aug, 2023 3 commits
-
-
Imre Deak authored
As described in the previous patch a connector shouldn't change its status while it's forced to a connected/disconnected state. This can still happen while running the connector detect function to account for lost HPD events in a low-power state. Fix this by reusing the connector detect function which handles a hotplug event and prevents updating the status for forced connectors as expected. Testcase: igt@kms_force_connector_basic@force-connector-state Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Jouni Högander <jouni.hogander@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230809104307.1218058-3-imre.deak@intel.com
-
Imre Deak authored
DRM display connectors forced to a connected/disconnected state via the drm_connector::force member shouldn't change their status. Atm, this can still happen in the connector's detect function when called to handle a hotplug event. This in turn may lead to the GETCONNECTOR ioctl to report the incorrect state if it's called to return the connector properties without doing an actual detection (by calling the ioctl with a non-zero drm_mode_get_connector::count_modes). Fix the above by updating the connector state during hotplug detect only if the connector state is not forced. Testcase: igt@kms_force_connector_basic@force-connector-state Signed-off-by:
-
Imre Deak authored
The issue fixed in commit a8ddac7c ("drm/i915: Avoid HPD poll detect triggering a new detect cycle") on VLV, CHV is still present on platforms where the display hotplug detection functionality is available whenever the device is in D0 state (hence these platforms switch to HPD polling only when the device is runtime suspended). The above commit avoids an endless i915_hpd_poll_init_work() -> connector detect loop by making sure that by the end of i915_hpd_poll_init_work() all display power references acquired by the connector detect functions which can trigger a new cycle (display core power domain) are dropped. However on platforms where HPD polling is enabled/disabled only from the runtime suspend/resume handlers, this is not ensured: for instance eDP VDD, TypeC port PHYs and the runtime autosuspend delay may still keep the device runtime resumed (via a power reference acquired during connector detection and hence result in an endless loop like the above). Solve the problem described in the above commit on all platforms, by making sure that a i915_hpd_poll_init_work() -> connector detect sequence can't take any power reference in the first place which would trigger a new cycle, instead of relying on these power references to be dropped by the end of the sequence. With the default runtime autosuspend delay (10 sec) this issue didn't happen in practice, since the device remained runtime resumed for the whole duration of the above sequence. CI/IGT tests however set the autosuspend delay to 0, which makes the problem visible, see References: below. Tested on GLK, CHV. v2: Don't warn about a requeued work, to account for disabling polling directly during driver loading, reset and system resume. References: https://gitlab.freedesktop.org/drm/intel/-/issues/7940#note_1997403Signed-off-by:
-
- 10 Aug, 2023 6 commits
-
-
Jani Nikula authored
Unify on making the calls from display code. Need to add an if ladder in gen8_de_irq_postinstall() for now, but the function looks like it could be overall be better split by platform. Something for the future. The display version check for mtp seems a bit suspect, but this matches current code. Signed-off-by:
-
Jani Nikula authored
Add a dedicated de postinstall function. Signed-off-by:
-
Jani Nikula authored
Add a dedicated de postinstall function. Signed-off-by:
-
Jani Nikula authored
Continue splitting display from the rest. Signed-off-by:
-
Jani Nikula authored
Debug log similar to the device id based identification of no display. Reviewed-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Jani Nikula authored
The current display probe is unable to differentiate between IVB Q and IVB D GT2 server, as they both have the same device id, but different subvendor and subdevice. This leads to the latter being misidentified as the former, and should just end up not having a display. However, the no display case returns a NULL as the display device info, and promptly oopses. As the IVB Q case is rare, and we're anyway moving towards GMD ID, handle the identification requiring subvendor and subdevice as a special case first, instead of unnecessarily growing the intel_display_ids[] array with subvendor and subdevice. [ 5.425298] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 5.426059] #PF: supervisor read access in kernel mode [ 5.426810] #PF: error_code(0x0000) - not-present page [ 5.427570] PGD 0 P4D 0 [ 5.428285] Oops: 0000 [#1] PREEMPT SMP PTI [ 5.429035] CPU: 0 PID: 137 Comm: (udev-worker) Not tainted 6.4.0-1-amd64 #1 Debian 6.4.4-1 [ 5.429759] Hardware name: HP HP Z220 SFF Workstation/HP Z220 SFF Workstation, BIOS 4.19-218-gb184e6e0a1 02/02/2023 [ 5.430485] RIP: 0010:intel_device_info_driver_create+0xf1/0x120 [i915] [ 5.431338] Code: 48 8b 97 80 1b 00 00 89 8f c0 1b 00 00 48 89 b7 b0 1b 00 00 48 89 97 b8 1b 00 00 0f b7 fd e8 76 e8 14 00 48 89 83 50 1b 00 00 <48> 8b 08 48 89 8b c4 1b 00 00 48 8b 48 08 48 89 8b cc 1b 00 00 8b [ 5.432920] RSP: 0018:ffffb8254044fb98 EFLAGS: 00010206 [ 5.433707] RAX: 0000000000000000 RBX: ffff923076e80000 RCX: 0000000000000000 [ 5.434494] RDX: 0000000000000260 RSI: 0000000100001000 RDI: 000000000000016a [ 5.435277] RBP: 000000000000016a R08: ffffb8254044fb00 R09: 0000000000000000 [ 5.436055] R10: ffff922d02761de8 R11: 00657361656c6572 R12: ffffffffc0e5d140 [ 5.436867] R13: ffff922d00b720d0 R14: 0000000076e80000 R15: ffff923078c0cae8 [ 5.437646] FS: 00007febd19a18c0(0000) GS:ffff92307c000000(0000) knlGS:0000000000000000 [ 5.438434] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5.439218] CR2: 0000000000000000 CR3: 000000010256e002 CR4: 00000000001706f0 [ 5.440009] Call Trace: [ 5.440824] <TASK> [ 5.441611] ? __die+0x23/0x70 [ 5.442394] ? page_fault_oops+0x17d/0x4c0 [ 5.443173] ? exc_page_fault+0x7f/0x180 [ 5.443949] ? asm_exc_page_fault+0x26/0x30 [ 5.444756] ? intel_device_info_driver_create+0xf1/0x120 [i915] [ 5.445652] ? intel_device_info_driver_create+0xea/0x120 [i915] [ 5.446545] i915_driver_probe+0x7f/0xb60 [i915] [ 5.447431] ? drm_privacy_screen_get+0x15c/0x1a0 [drm] [ 5.448240] local_pci_probe+0x45/0xa0 [ 5.449013] pci_device_probe+0xc7/0x240 [ 5.449748] really_probe+0x19e/0x3e0 [ 5.450464] ? __pfx___driver_attach+0x10/0x10 [ 5.451172] __driver_probe_device+0x78/0x160 [ 5.451870] driver_probe_device+0x1f/0x90 [ 5.452601] __driver_attach+0xd2/0x1c0 [ 5.453293] bus_for_each_dev+0x88/0xd0 [ 5.453989] bus_add_driver+0x116/0x220 [ 5.454672] driver_register+0x59/0x100 [ 5.455336] i915_init+0x25/0xc0 [i915] [ 5.456104] ? __pfx_i915_init+0x10/0x10 [i915] [ 5.456882] do_one_initcall+0x5d/0x240 [ 5.457511] do_init_module+0x60/0x250 [ 5.458126] __do_sys_finit_module+0xac/0x120 [ 5.458721] do_syscall_64+0x60/0xc0 [ 5.459314] ? syscall_exit_to_user_mode+0x1b/0x40 [ 5.459897] ? do_syscall_64+0x6c/0xc0 [ 5.460510] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 5.461082] RIP: 0033:0x7febd20b0eb9 [ 5.461648] Code: 08 89 e8 5b 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 2f 1f 0d 00 f7 d8 64 89 01 48 [ 5.462905] RSP: 002b:00007fffabb1ba78 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 5.463554] RAX: ffffffffffffffda RBX: 0000561e6304f410 RCX: 00007febd20b0eb9 [ 5.464201] RDX: 0000000000000000 RSI: 00007febd2244f0d RDI: 0000000000000015 [ 5.464869] RBP: 00007febd2244f0d R08: 0000000000000000 R09: 000000000000000a [ 5.465512] R10: 0000000000000015 R11: 0000000000000246 R12: 0000000000020000 [ 5.466124] R13: 0000000000000000 R14: 0000561e63032b60 R15: 000000000000000a [ 5.466700] </TASK> [ 5.467271] Modules linked in: i915(+) drm_buddy video crc32_pclmul sr_mod hid_generic wmi crc32c_intel i2c_algo_bit sd_mod cdrom drm_display_helper cec usbhid rc_core ghash_clmulni_intel hid sha512_ssse3 ttm sha512_generic xhci_pci ehci_pci xhci_hcd ehci_hcd nvme ahci drm_kms_helper nvme_core libahci t10_pi libata psmouse aesni_intel scsi_mod crypto_simd i2c_i801 scsi_common crc64_rocksoft_generic cryptd i2c_smbus drm lpc_ich crc64_rocksoft crc_t10dif e1000e usbcore crct10dif_generic usb_common crct10dif_pclmul crc64 crct10dif_common button [ 5.469750] CR2: 0000000000000000 [ 5.470364] ---[ end trace 0000000000000000 ]--- [ 5.470971] RIP: 0010:intel_device_info_driver_create+0xf1/0x120 [i915] [ 5.471699] Code: 48 8b 97 80 1b 00 00 89 8f c0 1b 00 00 48 89 b7 b0 1b 00 00 48 89 97 b8 1b 00 00 0f b7 fd e8 76 e8 14 00 48 89 83 50 1b 00 00 <48> 8b 08 48 89 8b c4 1b 00 00 48 8b 48 08 48 89 8b cc 1b 00 00 8b [ 5.473034] RSP: 0018:ffffb8254044fb98 EFLAGS: 00010206 [ 5.473698] RAX: 0000000000000000 RBX: ffff923076e80000 RCX: 0000000000000000 [ 5.474371] RDX: 0000000000000260 RSI: 0000000100001000 RDI: 000000000000016a [ 5.475045] RBP: 000000000000016a R08: ffffb8254044fb00 R09: 0000000000000000 [ 5.475725] R10: ffff922d02761de8 R11: 00657361656c6572 R12: ffffffffc0e5d140 [ 5.476405] R13: ffff922d00b720d0 R14: 0000000076e80000 R15: ffff923078c0cae8 [ 5.477124] FS: 00007febd19a18c0(0000) GS:ffff92307c000000(0000) knlGS:0000000000000000 [ 5.477811] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5.478499] CR2: 0000000000000000 CR3: 000000010256e002 CR4: 00000000001706f0 Fixes: 69d43981 ("drm/i915/display: Make display responsible for probing its own IP") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8991 Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by:
-
- 08 Aug, 2023 1 commit
-
-
Luca Coelho authored
When intel_display_device_probe() (and, subsequently, probe_gmdid_display()) returns, the caller expects ver, rel and step to be initialized. Since there's no way to check that there was a failure and no_display was returned without some further refactoring, pre-initiliaze all these values to zero to keep it simple and safe. Signed-off-by:
-
- 07 Aug, 2023 13 commits
-
-
Dnyaneshwar Bhadane authored
Driver refers to the platform Alderlake S as ADLS_RPLS in places and RAPTORLAKE_S in some. v2: - Unrolled wrapper IS_ADLS_GRAPHICS_STEP v3: - Replace IS_RAPTORLAKE_S instead of IS_ADLS_RPLS. (Tvrtko/Lucas). - Remove unused macro IS_ADLS_GRAPHICS/DISPLAY_STEP - Change the subject Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com> Reviewed-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Acked-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230801135344.3797924-15-dnyaneshwar.bhadane@intel.com
-
Anusha Srivatsa authored
Follow consistent naming convention. Replace ADLP with ALDERLAKE_P Signed-off-by:
-
Dnyaneshwar Bhadane authored
Follow consistent naming convention. Replace ADLP with ALDERLAKE_P v2: - Replace IS_ADLP_RPLU with IS_RAPTORLAKE_U (Tvrtko/Lucas) - Change the subject Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
-
Dnyaneshwar Bhadane authored
Follow consistent naming convention. Replace ADLP with ALDERLAKE_P. v2: - Replace IS_ADLP_RPLP with IS_RAPTORLAKE_P. (Tvrtko/Lucas) - Change the subject Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
-
Dnyaneshwar Bhadane authored
Driver refers to the platform Alderlake P as ADLP in places and ALDERLAKE_P in some. Making the consistent change to avoid confusion of the right naming convention for the platform. v2: - Unrolled wrapper IS_ADLP_GRAPHICS_STEP and Replace - Added IS_ALDERLAKE_P() && IS_GRAPHICS_STEP() (Jani/Tvrtko). v3: - Removed unused macros of display steps. Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
-
Dnyaneshwar Bhadane authored
Follow consistent naming convention. Replace TGL with TIGERLAKE.Replace IS_TGL_DISPLAY_STEP with IS_TIGERLAKE() && IS_DISPLAY_STEP(). v2: - s/TGL/tgl in the subject prefix(Anusha) v3: - Unrolled wrapper IS_TGL_DISPLAY_STEP and Replace - Replace IS_PLATFORM && DISPLAY_STEP (Jani/Tvrtko). v4: - Removed unused macros Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
-
Dnyaneshwar Bhadane authored
Follow consistent naming convention. Replace JSL with JASPERLAKE. Unroll IS_JSL_EHL() define with IS_JASPERLAKE() || IS_ELKHARTLAKE() condition. Change in the display step define for Jasperlake. v2: - Change subject prefix skl instead of SKL(Anusha) v3: - Remove the use of define IS_JSL_EHL. - Replace with IS_JASPERLAKE() || IS_ELKHARTLAKE() - Unrolled wrapper IS_JSL_ELK_DISPLAY_STEP (Jani/Tvrtko) v4: - Removed unused macro v5: - Resolved valid checkpatch warning(Jani) Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
-
Dnyaneshwar Bhadane authored
Follow consistent naming convention. Replace RKL with ROCKETLAKE.Replace IS_RKL_GRAPHICS_STEP with IS_ROCKETLAKE && IS_DISPLAY_STEP. v2: - s/RKL/rkl in the subject prefix(Anusha) v3: - Unrolled wrapper IS_RKL_DISPLAY_STEP. - Replace IS_PLATFORM && IS_DISPLAY_STEP (Jani/Tvrtko) Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
-
Dnyaneshwar Bhadane authored
Follow consistent naming convention. Replace CML with COMETLAKE. Signed-off-by:
-
Dnyaneshwar Bhadane authored
Follow consistent naming convention. Replace CFL with COFFEELAKE. Signed-off-by:
-
Dnyaneshwar Bhadane authored
Follow consistent naming convention. Replace KBL with KABYLAKE.Replace IS_KBL_GRAPHICS_STEP with IS_KABYLAKE () && IS_GRAPHICS_STEP(). v2: - s/KBL/kbl in the subject prefix(Anusha) v3: - Unrolled wrapper IS_KBL_GRAPHICS_STEP. - Replace with IS_PLATFORM && DISPLAY_STEP(tvrtko/jani) v4: - Removed unused macro. Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Anusha Srivatsa <Anusha.Srivatsa@intel.com> Signed-off-by:
-
Dnyaneshwar Bhadane authored
Follow consistent naming convention. Replace SKL with SKYLAKE and Replace IS_SKL_GRAPHICS_STEP with IS_SKYLAKE() && IS_GRAPHICS_STEP(). v2: - Change subject skl instead of SKL(Anusha) v3: - Unrolled wrapper IS_SKL_GRAPHICS_STEP. - Replace with IS_PLATFORM && DISPLAY_STEP(tvrtko/jani) v4: - Removed the unused macro. Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
-
Dnyaneshwar Bhadane authored
Follow consistent naming convention. Replace BDW with BROADWELL. Signed-off-by:
-
