- 26 Jul, 2019 40 commits
-
-
Russell King authored
[ Upstream commit c859e0d4 ] Documentation states: NOTE: There must be a correlation between the wake-up enable and interrupt-enable registers. If a GPIO pin has a wake-up configured on it, it must also have the corresponding interrupt enabled (on one of the two interrupt lines). Ensure that this condition is always satisfied by enabling the detection events after enabling the interrupt, and disabling the detection before disabling the interrupt. This ensures interrupt/wakeup events can not happen until both the wakeup and interrupt enables correlate. If we do any clearing, clear between the interrupt enable/disable and trigger setting. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Tested-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Russell King authored
[ Upstream commit 64ea3e90 ] Commit 384ebe1c ("gpio/omap: Add DT support to GPIO driver") added the register definition tables to the gpio-omap driver. Subsequently to that commit, commit 4e962e89 ("gpio/omap: remove cpu_is_omapxxxx() checks from *_runtime_resume()") added definitions for irqstatus_raw* registers to the legacy OMAP4 definitions, but missed the DT definitions. This causes an unintentional change of behaviour for the 1.101 errata workaround on OMAP4 platforms. Fix this oversight. Fixes: 4e962e89 ("gpio/omap: remove cpu_is_omapxxxx() checks from *_runtime_resume()") Signed-off-by:
-
Eric Auger authored
[ Upstream commit ad0834de ] In case we expand an existing region, we unlink this latter and insert the larger one. In that case we should free the original region after the insertion. Also we can immediately return. Fixes: 6c65fb31 ("iommu: iommu_get_group_resv_regions") Signed-off-by:
Eric Auger <eric.auger@redhat.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Kieran Bingham authored
[ Upstream commit 4e8c120d ] New Gen3 R-Car platforms incorporate the FDP1 with an updated version register. No code change is required to support these targets, but they will currently report an error stating that the device can not be identified. Update the driver to match against the new device types. Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Oliver Neukum authored
[ Upstream commit 11a087f4 ] We need to check whether this work we are canceling actually is initialized. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Reported-by: syzbot+2e1ef9188251d9cc7944@syzkaller.appspotmail.com Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Xingyu Chen authored
[ Upstream commit c64a9e80 ] The Meson-G12A SoC uses the same GPIO interrupt controller IP block as the other Meson SoCs, A totle of 100 pins can be spied on, which is the sum of: - 223:100 undefined (no interrupt) - 99:97 3 pins on bank GPIOE - 96:77 20 pins on bank GPIOX - 76:61 16 pins on bank GPIOA - 60:53 8 pins on bank GPIOC - 52:37 16 pins on bank BOOT - 36:28 9 pins on bank GPIOH - 27:12 16 pins on bank GPIOZ - 11:0 12 pins in the AO domain Signed-off-by:
Xingyu Chen <xingyu.chen@amlogic.com> Signed-off-by:
Jianxin Pan <jianxin.pan@amlogic.com> Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Thomas Richter authored
[ Upstream commit 8a07aa4e ] Debugging a OOM error using the TUI interface revealed this issue on s390: [tmricht@m83lp54 perf]$ cat /proc/kallsyms |sort .... 00000001119b7158 B radix_tree_node_cachep 00000001119b8000 B __bss_stop 00000001119b8000 B _end 000003ff80002850 t autofs_mount [autofs4] 000003ff80002868 t autofs_show_options [autofs4] 000003ff80002a98 t autofs_evict_inode [autofs4] .... There is a huge gap between the last kernel symbol __bss_stop/_end and the first kernel module symbol autofs_mount (from autofs4 module). After reading the kernel symbol table via functions: dso__load() +--> dso__load_kernel_sym() +--> dso__load_kallsyms() +--> __dso_load_kallsyms() +--> symbols__fixup_end() the symbol __bss_stop has a start address of 1119b8000 and an end address of 3ff80002850, as can be seen by this debug statement: symbols__fixup_end __bss_stop start:0x1119b8000 end:0x3ff80002850 The size of symbol __bss_stop is 0x3fe6e64a850 bytes! It is the last kernel symbol and fills up the space until the first kernel module symbol. This size kills the TUI interface when executing the following code: process_sample_event() hist_entry_iter__add() hist_iter__report_callback() hist_entry__inc_addr_samples() symbol__inc_addr_samples(symbol = __bss_stop) symbol__cycles_hist() annotated_source__alloc_histograms(..., symbol__size(sym), ...) This function allocates memory to save sample histograms. The symbol_size() marco is defined as sym->end - sym->start, which results in above value of 0x3fe6e64a850 bytes and the call to calloc() in annotated_source__alloc_histograms() fails. The histgram memory allocation might fail, make this failure no-fatal and continue processing. Output before: [tmricht@m83lp54 perf]$ ./perf --debug stderr=1 report -vvvvv \ -i ~/slow.data 2>/tmp/2 [tmricht@m83lp54 perf]$ tail -5 /tmp/2 __symbol__inc_addr_samples(875): ENOMEM! sym->name=__bss_stop, start=0x1119b8000, addr=0x2aa0005eb08, end=0x3ff80002850, func: 0 problem adding hist entry, skipping event 0x938b8 [0x8]: failed to process type: 68 [Cannot allocate memory] [tmricht@m83lp54 perf]$ Output after: [tmricht@m83lp54 perf]$ ./perf --debug stderr=1 report -vvvvv \ -i ~/slow.data 2>/tmp/2 [tmricht@m83lp54 perf]$ tail -5 /tmp/2 symbol__inc_addr_samples map:0x1597830 start:0x110730000 end:0x3ff80002850 symbol__hists notes->src:0x2aa2a70 nr_hists:1 symbol__inc_addr_samples sym:unlink_anon_vmas src:0x2aa2a70 __symbol__inc_addr_samples: addr=0x11094c69e 0x11094c670 unlink_anon_vmas: period++ [addr: 0x11094c69e, 0x2e, evidx=0] => nr_samples: 1, period: 526008 [tmricht@m83lp54 perf]$ There is no error about failed memory allocation and the TUI interface shows all entries. Signed-off-by:
Thomas Richter <tmricht@linux.ibm.com> Reviewed-by:
Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/90cb5607-3e12-5167-682d-978eba7dafa8@linux.ibm.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Thomas Richter authored
[ Upstream commit 53fe307d ] Command # perf test -Fv 6 fails with error running test 100 'kvm-s390:kvm_s390_create_vm' failed to parse event 'kvm-s390:kvm_s390_create_vm', err -1, str 'unknown tracepoint' event syntax error: 'kvm-s390:kvm_s390_create_vm' \___ unknown tracepoint when the kvm module is not loaded or not built in. Fix this by adding a valid function which tests if the module is loaded. Loaded modules (or builtin KVM support) have a directory named /sys/kernel/debug/tracing/events/kvm-s390 for this tracepoint. Check for existence of this directory. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20190604053504.43073-1-tmricht@linux.ibm.comSigned-off-by:
-
Mathieu Poirier authored
[ Upstream commit e45c48a9 ] This patch adds the necessary intelligence to properly compute the value of 'old' and 'head' when operating in snapshot mode. That way we can get the latest information in the AUX buffer and be compatible with the generic AUX ring buffer mechanic. Tester notes: > Leo, have you had the chance to test/review this one? Suzuki? Sure. I applied this patch on the perf/core branch (with latest commit 3e4fbf36c1e3 'perf augmented_raw_syscalls: Move reading filename to the loop') and passed testing with below steps: # perf record -e cs_etm/@tmc_etr0/ -S -m,64 --per-thread ./sort & [1] 19097 Bubble sorting array of 30000 elements # kill -USR2 19097 # kill -USR2 19097 # kill -USR2 19097 [ perf record: Woken up 4 times to write data ] [ perf record: Captured and wrote 0.753 MB perf.data ] Signed-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by:
Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/20190605161633.12245-1-mathieu.poirier@linaro.orgSigned-off-by:
-
Stefano Brivio authored
[ Upstream commit 11921796 ] If a fresh array block is allocated during resize, the current in-memory set size should be increased by the size of the block, not replaced by it. Before the fix, adding entries to a hash set type, leading to a table resize, caused an inconsistent memory size to be reported. This becomes more obvious when swapping sets with similar sizes: # cat hash_ip_size.sh #!/bin/sh FAIL_RETRIES=10 tries=0 while [ ${tries} -lt ${FAIL_RETRIES} ]; do ipset create t1 hash:ip for i in `seq 1 4345`; do ipset add t1 1.2.$((i / 255)).$((i % 255)) done t1_init="$(ipset list t1|sed -n 's/Size in memory: \(.*\)/\1/p')" ipset create t2 hash:ip for i in `seq 1 4360`; do ipset add t2 1.2.$((i / 255)).$((i % 255)) done t2_init="$(ipset list t2|sed -n 's/Size in memory: \(.*\)/\1/p')" ipset swap t1 t2 t1_swap="$(ipset list t1|sed -n 's/Size in memory: \(.*\)/\1/p')" t2_swap="$(ipset list t2|sed -n 's/Size in memory: \(.*\)/\1/p')" ipset destroy t1 ipset destroy t2 tries=$((tries + 1)) if [ ${t1_init} -lt 10000 ] || [ ${t2_init} -lt 10000 ]; then echo "FAIL after ${tries} tries:" echo "T1 size ${t1_init}, after swap ${t1_swap}" echo "T2 size ${t2_init}, after swap ${t2_swap}" exit 1 fi done echo "PASS" # echo -n 'func hash_ip4_resize +p' > /sys/kernel/debug/dynamic_debug/control # ./hash_ip_size.sh [ 2035.018673] attempt to resize set t1 from 10 to 11, t 00000000fe6551fa [ 2035.078583] set t1 resized from 10 (00000000fe6551fa) to 11 (00000000172a0163) [ 2035.080353] Table destroy by resize 00000000fe6551fa FAIL after 4 tries: T1 size 9064, after swap 71128 T2 size 71128, after swap 9064 Reported-by:
NOYB <JunkYardMail1@Frontier.com> Fixes: 9e41f26a ("netfilter: ipset: Count non-static extension memory for userspace") Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
-
Robert Hancock authored
[ Upstream commit 2158e856 ] sfp_check_state can potentially be called by both a threaded IRQ handler and delayed work. If it is concurrently called, it could result in incorrect state management. Add a st_mutex to protect the state - this lock gets taken outside of code that checks and handle state changes, and the existing sm_mutex nests inside of it. Suggested-by:
Robert Hancock <hancock@sedsystems.ca> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Borislav Petkov authored
[ Upstream commit 6d8e294b ] When inserting random PFNs for debugging the CEC through (debugfs)/ras/cec/pfn, depending on the return value of pfn_set(), multiple values get inserted per a single write. That is because simple_attr_write() interprets a retval of 0 as success and claims the whole input. However, pfn_set() returns the cec_add_elem() value, which, if > 0 and smaller than the whole input length, makes glibc continue issuing the write syscall until there's input left: pfn_set simple_attr_write debugfs_attr_write full_proxy_write vfs_write ksys_write do_syscall_64 entry_SYSCALL_64_after_hwframe leading to those repeated calls. Return 0 to fix that. Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Signed-off-by:
-
Julian Wiedmann authored
[ Upstream commit 04310324 ] When a CQ-enabled device uses QEBSM for SBAL state inspection, get_buf_states() can return the PENDING state for an Output Queue. get_outbound_buffer_frontier() isn't prepared for this, and any PENDING buffer will permanently stall all further completion processing on this Queue. This isn't a concern for non-QEBSM devices, as get_buf_states() for such devices will manually turn PENDING buffers into EMPTY ones. Fixes: 104ea556 ("qdio: support asynchronous delivery of storage blocks") Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Robert Hancock authored
[ Upstream commit 7de44285 ] It is possible that the interrupt handler fires and frees up space in the TX ring in between checking for sufficient TX ring space and stopping the TX queue in axienet_start_xmit. If this happens, the queue wake from the interrupt handler will occur before the queue is stopped, causing a lost wakeup and the adapter's transmit hanging. To avoid this, after stopping the queue, check again whether there is sufficient space in the TX ring. If so, wake up the queue again. Signed-off-by:
-
Fabio Estevam authored
[ Upstream commit a19a0582 ] When a valid MAC address is not found the current messages are shown: fec 2188000.ethernet (unnamed net_device) (uninitialized): Invalid MAC address: 00:00:00:00:00:00 fec 2188000.ethernet (unnamed net_device) (uninitialized): Using random MAC address: aa:9f:25:eb:7e:aa Since the network device has not been registered at this point, it is better to use dev_err()/dev_info() instead, which will provide cleaner log messages like these: fec 2188000.ethernet: Invalid MAC address: 00:00:00:00:00:00 fec 2188000.ethernet: Using random MAC address: aa:9f:25:eb:7e:aa Tested on a imx6dl-pico-pi board. Signed-off-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
-
Antoine Tenart authored
[ Upstream commit 89332590 ] When performing a transformation the hardware is given result descriptors to save the result data. Those result descriptors are batched using a 'first' and a 'last' bit. There are cases were more descriptors than needed are given to the engine, leading to the engine only using some of them, and not setting the last bit on the last descriptor we gave. This causes issues were the driver and the hardware aren't in sync anymore about the number of result descriptors given (as the driver do not give a pool of descriptor to use for any transformation, but a pool of descriptors to use *per* transformation). This patch fixes it by attaching the number of given result descriptors to the requests, and by using this number instead of the 'last' bit found on the descriptors to process them. Signed-off-by:
Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Biao Huang authored
[ Upstream commit d2facb4b ] the default value of tx-frames is 25, it's too late when passing tstamp to stack, then the ptp4l will fail: ptp4l -i eth0 -f gPTP.cfg -m ptp4l: selected /dev/ptp0 as PTP clock ptp4l: port 1: INITIALIZING to LISTENING on INITIALIZE ptp4l: port 0: INITIALIZING to LISTENING on INITIALIZE ptp4l: port 1: link up ptp4l: timed out while polling for tx timestamp ptp4l: increasing tx_timestamp_timeout may correct this issue, but it is likely caused by a driver bug ptp4l: port 1: send peer delay response failed ptp4l: port 1: LISTENING to FAULTY on FAULT_DETECTED (FT_UNSPECIFIED) ptp4l tests pass when changing the tx-frames from 25 to 1 with ethtool -C option. It should be fine to set tx-frames default value to 1, so ptp4l will pass by default. Signed-off-by:
Biao Huang <biao.huang@mediatek.com> Signed-off-by:
-
Biao Huang authored
[ Upstream commit ee326fd0 ] Current dwmac4_flow_ctrl will not clear GMAC_RX_FLOW_CTRL_RFE/GMAC_RX_FLOW_CTRL_RFE bits, so MAC hw will keep flow control on although expecting flow control off by ethtool. Add codes to fix it. Fixes: 477286b5 ("stmmac: add GMAC4 core support") Signed-off-by:
-
Jae Hyun Yoo authored
[ Upstream commit 12ae1c1b ] Differently from other Aspeed drivers, this driver calls clock control APIs in interrupt context. Since ECLK is coupled with a reset bit in clk-aspeed module, aspeed_clk_enable will make 10ms of busy waiting delay for triggering the reset and it will eventually disturb other drivers' interrupt handling. To fix this issue, this commit changes this driver's irq to threaded irq so that the delay can be happened in a thread context. Signed-off-by:
Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by:
Eddie James <eajames@linux.ibm.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Jiri Olsa authored
[ Upstream commit 279ab04d ] We are getting false positive gcc warning when we compile with gcc9 (9.1.1): CC jvmti/libjvmti.o In file included from /usr/include/string.h:494, from jvmti/libjvmti.c:5: In function ‘strncpy’, inlined from ‘copy_class_filename.constprop’ at jvmti/libjvmti.c:166:3: /usr/include/bits/string_fortified.h:106:10: error: ‘__builtin_strncpy’ specified bound depends on the length of the source argument [-Werror=stringop-overflow=] 106 | return __builtin___strncpy_chk (__dest, __src, __len, __bos (__dest)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ jvmti/libjvmti.c: In function ‘copy_class_filename.constprop’: jvmti/libjvmti.c:165:26: note: length computed here 165 | size_t file_name_len = strlen(file_name); | ^~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors As per Arnaldo's suggestion use strlcpy(), which does the same thing and keeps gcc silent. Suggested-by:
Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ben Gainey <ben.gainey@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20190531131321.GB1281@kravaSigned-off-by:
-
Fabio Estevam authored
[ Upstream commit 2b393f91 ] Currently the return value from clk_bulk_prepare_enable() is checked, but it is not propagate it in the case of failure. Fix it and also move the error message to the caller of mipi_csis_clk_enable(). Signed-off-by:
Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by:
-
Miles Chen authored
[ Upstream commit 0c1f14ed ] This change makes CONFIG_ZONE_DMA32 defuly y and allows users to overwrite it only when CONFIG_EXPERT=y. For the SoCs that do not need CONFIG_ZONE_DMA32, this is the first step to manage all available memory by a single zone(normal zone) to reduce the overhead of multiple zones. The change also fixes a build error when CONFIG_NUMA=y and CONFIG_ZONE_DMA32=n. arch/arm64/mm/init.c:195:17: error: use of undeclared identifier 'ZONE_DMA32' max_zone_pfns[ZONE_DMA32] = PFN_DOWN(max_zone_dma_phys()); Change since v1: 1. only expose CONFIG_ZONE_DMA32 when CONFIG_EXPERT=y 2. remove redundant IS_ENABLED(CONFIG_ZONE_DMA32) Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Miles Chen <miles.chen@mediatek.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Abhishek Goel authored
[ Upstream commit 04507c0a ] To set frequency on specific cpus using cpupower, following syntax can be used : cpupower -c #i frequency-set -f #f -r While setting frequency using cpupower frequency-set command, if we use '-r' option, it is expected to set frequency for all cpus related to cpu #i. But it is observed to be missing the last cpu in related cpu list. This patch fixes the problem. Signed-off-by:
Abhishek Goel <huntbag@linux.vnet.ibm.com> Reviewed-by:
Thomas Renninger <trenn@suse.de> Signed-off-by:
Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
-
Weihang Li authored
[ Upstream commit 594a81b3 ] The hclge/hclgevf and hns3 module can be unloaded independently, when hclge/hclgevf unloaded firstly, the ops of ae_dev should be set to NULL, otherwise it will cause an use-after-free problem. Fixes: 38caee9d ("net: hns3: Add support of the HNAE3 framework") Signed-off-by:
Weihang Li <liweihang@hisilicon.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Weihang Li authored
[ Upstream commit 661262bc ] If we add a VF without loading hclgevf.ko and then there is a RAS error occurs, PCIe AER will call error_detected and slot_reset of all functions, and will get a NULL pointer when we check ad_dev->ops->handle_hw_ras_error. This will cause a call trace and failures on handling of follow-up RAS errors. This patch check ae_dev and ad_dev->ops at first to solve above issues. Signed-off-by:
-
Kefeng Wang authored
[ Upstream commit 69fbb3f4 ] X-Originating-IP: [10.175.113.25] X-CFilter-Loop: Reflected The fm_v4l2_init_video_device() forget to unregister v4l2/video device in the error path, it could lead to UAF issue, eg, BUG: KASAN: use-after-free in atomic64_read include/asm-generic/atomic-instrumented.h:836 [inline] BUG: KASAN: use-after-free in atomic_long_read include/asm-generic/atomic-long.h:28 [inline] BUG: KASAN: use-after-free in __mutex_unlock_slowpath+0x92/0x690 kernel/locking/mutex.c:1206 Read of size 8 at addr ffff8881e84a7c70 by task v4l_id/3659 CPU: 1 PID: 3659 Comm: v4l_id Not tainted 5.1.0 #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xa9/0x10e lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 atomic64_read include/asm-generic/atomic-instrumented.h:836 [inline] atomic_long_read include/asm-generic/atomic-long.h:28 [inline] __mutex_unlock_slowpath+0x92/0x690 kernel/locking/mutex.c:1206 fm_v4l2_fops_open+0xac/0x120 [fm_drv] v4l2_open+0x191/0x390 [videodev] chrdev_open+0x20d/0x570 fs/char_dev.c:417 do_dentry_open+0x700/0xf30 fs/open.c:777 do_last fs/namei.c:3416 [inline] path_openat+0x7c4/0x2a90 fs/namei.c:3532 do_filp_open+0x1a5/0x2b0 fs/namei.c:3563 do_sys_open+0x302/0x490 fs/open.c:1069 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f8180c17c8e ... Allocated by task 3642: set_track mm/kasan/common.c:87 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:497 fm_drv_init+0x13/0x1000 [fm_drv] do_one_initcall+0xbc/0x47d init/main.c:901 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 3642: set_track mm/kasan/common.c:87 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:459 slab_free_hook mm/slub.c:1429 [inline] slab_free_freelist_hook mm/slub.c:1456 [inline] slab_free mm/slub.c:3003 [inline] kfree+0xe1/0x270 mm/slub.c:3958 fm_drv_init+0x1e6/0x1000 [fm_drv] do_one_initcall+0xbc/0x47d init/main.c:901 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Add relevant unregister functions to fix it. Cc: Hans Verkuil <hans.verkuil@cisco.com> Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by:
-
Imre Deak authored
[ Upstream commit d9349850 ] The sequence static DEFINE_WW_CLASS(test_ww_class); struct ww_acquire_ctx ww_ctx; struct ww_mutex ww_lock_a; struct ww_mutex ww_lock_b; struct ww_mutex ww_lock_c; struct mutex lock_c; ww_acquire_init(&ww_ctx, &test_ww_class); ww_mutex_init(&ww_lock_a, &test_ww_class); ww_mutex_init(&ww_lock_b, &test_ww_class); ww_mutex_init(&ww_lock_c, &test_ww_class); mutex_init(&lock_c); ww_mutex_lock(&ww_lock_a, &ww_ctx); mutex_lock(&lock_c); ww_mutex_lock(&ww_lock_b, &ww_ctx); ww_mutex_lock(&ww_lock_c, &ww_ctx); mutex_unlock(&lock_c); (*) ww_mutex_unlock(&ww_lock_c); ww_mutex_unlock(&ww_lock_b); ww_mutex_unlock(&ww_lock_a); ww_acquire_fini(&ww_ctx); (**) will trigger the following error in __lock_release() when calling mutex_release() at **: DEBUG_LOCKS_WARN_ON(depth <= 0) The problem is that the hlock merging happening at * updates the references for test_ww_class incorrectly to 3 whereas it should've updated it to 4 (representing all the instances for ww_ctx and ww_lock_[abc]). Fix this by updating the references during merging correctly taking into account that we can have non-zero references (both for the hlock that we merge into another hlock or for the hlock we are merging into). Signed-off-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= <ville.syrjala@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Link: https://lkml.kernel.org/r/20190524201509.9199-2-imre.deak@intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Imre Deak authored
[ Upstream commit 8c8889d8 ] The sequence static DEFINE_WW_CLASS(test_ww_class); struct ww_acquire_ctx ww_ctx; struct ww_mutex ww_lock_a; struct ww_mutex ww_lock_b; struct mutex lock_c; struct mutex lock_d; ww_acquire_init(&ww_ctx, &test_ww_class); ww_mutex_init(&ww_lock_a, &test_ww_class); ww_mutex_init(&ww_lock_b, &test_ww_class); mutex_init(&lock_c); ww_mutex_lock(&ww_lock_a, &ww_ctx); mutex_lock(&lock_c); ww_mutex_lock(&ww_lock_b, &ww_ctx); mutex_unlock(&lock_c); (*) ww_mutex_unlock(&ww_lock_b); ww_mutex_unlock(&ww_lock_a); ww_acquire_fini(&ww_ctx); triggers the following WARN in __lock_release() when doing the unlock at *: DEBUG_LOCKS_WARN_ON(curr->lockdep_depth != depth - 1); The problem is that the WARN check doesn't take into account the merging of ww_lock_a and ww_lock_b which results in decreasing curr->lockdep_depth by 2 not only 1. Note that the following sequence doesn't trigger the WARN, since there won't be any hlock merging. ww_acquire_init(&ww_ctx, &test_ww_class); ww_mutex_init(&ww_lock_a, &test_ww_class); ww_mutex_init(&ww_lock_b, &test_ww_class); mutex_init(&lock_c); mutex_init(&lock_d); ww_mutex_lock(&ww_lock_a, &ww_ctx); mutex_lock(&lock_c); mutex_lock(&lock_d); ww_mutex_lock(&ww_lock_b, &ww_ctx); mutex_unlock(&lock_d); ww_mutex_unlock(&ww_lock_b); ww_mutex_unlock(&ww_lock_a); mutex_unlock(&lock_c); ww_acquire_fini(&ww_ctx); In general both of the above two sequences are valid and shouldn't trigger any lockdep warning. Fix this by taking the decrement due to the hlock merging into account during lock release and hlock class re-setting. Merging can't happen during lock downgrading since there won't be a new possibility to merge hlocks in that case, so add a WARN if merging still happens then. Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit 9e6b5648 ] The state of slave interfaces are handled differently depending on whether the interface is up or not. All active interfaces (IFF_UP) will transmit OGMs. But for B.A.T.M.A.N. IV, also non-active interfaces are scheduling (low TTL) OGMs on active interfaces. The code which setups and schedules the OGMs must therefore already be called when the interfaces gets added as slave interface and the transmit function must then check whether it has to send out the OGM or not on the specific slave interface. But the commit f0d97253 ("batman-adv: remove ogm_emit and ogm_schedule API calls") moved the setup code from the enable function to the activate function. The latter is called either when the added slave was already up when batadv_hardif_enable_interface processed the new interface or when a NETDEV_UP event was received for this slave interfac. As result, each NETDEV_UP would schedule a new OGM worker for the interface and thus OGMs would be send a lot more than expected. Fixes: f0d97253 ("batman-adv: remove ogm_emit and ogm_schedule API calls") Reported-by:
Linus Lüssing <linus.luessing@c0d3.blue> Tested-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
David S. Miller authored
[ Upstream commit 621ccc6c ] Rename _P to _P_VAL and _R to _R_VAL to avoid global namespace conflicts: drivers/media/dvb-frontends/tua6100.c: In function ‘tua6100_set_params’: drivers/media/dvb-frontends/tua6100.c:79: warning: "_P" redefined #define _P 32 In file included from ./include/acpi/platform/aclinux.h:54, from ./include/acpi/platform/acenv.h:152, from ./include/acpi/acpi.h:22, from ./include/linux/acpi.h:34, from ./include/linux/i2c.h:17, from drivers/media/dvb-frontends/tua6100.h:30, from drivers/media/dvb-frontends/tua6100.c:32: ./include/linux/ctype.h:14: note: this is the location of the previous definition #define _P 0x10 /* punct */ Signed-off-by:
-
Christophe Leroy authored
[ Upstream commit c9cca703 ] The MPC885 reference manual states: SEC Lite-initiated 8xx writes can occur only on 32-bit-word boundaries, but reads can occur on any byte boundary. Writing back a header read from a non-32-bit-word boundary will yield unpredictable results. In order to ensure that, cra_alignmask is set to 3 for SEC1. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Fixes: 9c4a7965 ("crypto: talitos - Freescale integrated security engine (SEC) driver") Signed-off-by:
-
Christophe Leroy authored
[ Upstream commit eae55a58 ] The driver assumes that the ICV is as a single piece in the last element of the scatterlist. This assumption is wrong. This patch ensures that the ICV is properly handled regardless of the scatterlist layout. Fixes: 9c4a7965 ("crypto: talitos - Freescale integrated security engine (SEC) driver") Signed-off-by:
-
Ioana Ciornei authored
[ Upstream commit 82c76aca ] In general, we don't want MAC drivers calling phy_attach_direct with the net_device being NULL. Add checks against this in all the functions calling it: phy_attach() and phy_connect_direct(). Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Suggested-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Shailendra Verma authored
[ Upstream commit 6995a659 ] Fix to avoid possible memory leak if the decoder initialization got failed.Free the allocated memory for file handle object before return in case decoder initialization fails. Signed-off-by:
Shailendra Verma <shailendra.v@samsung.com> Signed-off-by:
-
Kefeng Wang authored
[ Upstream commit 50710eee ] if saa7164_proc_create() fails, saa7164_fini() will trigger a warning, name 'saa7164' WARNING: CPU: 1 PID: 6311 at fs/proc/generic.c:672 remove_proc_entry+0x1e8/0x3a0 ? remove_proc_entry+0x1e8/0x3a0 ? try_stop_module+0x7b/0x240 ? proc_readdir+0x70/0x70 ? rcu_read_lock_sched_held+0xd7/0x100 saa7164_fini+0x13/0x1f [saa7164] __x64_sys_delete_module+0x30c/0x480 ? __ia32_sys_delete_module+0x480/0x480 ? __x64_sys_clock_gettime+0x11e/0x1c0 ? __x64_sys_timer_create+0x1a0/0x1a0 ? trace_hardirqs_off_caller+0x40/0x180 ? do_syscall_64+0x18/0x450 do_syscall_64+0x9f/0x450 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fix it by checking the return of proc_create_single() before calling remove_proc_entry(). Signed-off-by:
-
Hans Verkuil authored
[ Upstream commit 518fa4e0 ] You can't memset the contents of a __user pointer. Instead, call copy_to_user to copy links.reserved (which is zeroed) to the user memory. This fixes this sparse warning: SPARSE:drivers/media/mc/mc-device.c drivers/media/mc/mc-device.c:521:16: warning: incorrect type in argument 1 (different address spaces) Fixes: f4930887 ("media: media_device_enum_links32: clean a reserved field") Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
[ Upstream commit da201963 ] Some compilers will complain when using a member of a struct to initialize another member, in the same struct initialization. For instance: debian:8 Debian clang version 3.5.0-10 (tags/RELEASE_350/final) (based on LLVM 3.5.0) oraclelinux:7 clang version 3.4.2 (tags/RELEASE_34/dot2-final) Produce: ui/browsers/annotate.c:104:12: error: variable 'ops' is uninitialized when used within its own initialization [-Werror,-Wuninitialized] (!ops.current_entry || ^~~ 1 error generated. So use an extra variable, initialized just before that struct, to have the value used in the expressions used to init two of the struct members. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: c298304b ("perf annotate: Use a ops table for annotation_line__write()") Link: https://lkml.kernel.org/n/tip-f9nexro58q62l3o9hez8hr0i@git.kernel.orgSigned-off-by:
-
Vandana BN authored
[ Upstream commit 5d2e73a5 ] SyzKaller hit the null pointer deref while reading from uninitialized udev->product in zr364xx_vidioc_querycap(). ================================================================== BUG: KASAN: null-ptr-deref in read_word_at_a_time+0xe/0x20 include/linux/compiler.h:274 Read of size 1 at addr 0000000000000000 by task v4l_id/5287 CPU: 1 PID: 5287 Comm: v4l_id Not tainted 5.1.0-rc3-319004-g43151d6 #6 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xe8/0x16e lib/dump_stack.c:113 kasan_report.cold+0x5/0x3c mm/kasan/report.c:321 read_word_at_a_time+0xe/0x20 include/linux/compiler.h:274 strscpy+0x8a/0x280 lib/string.c:207 zr364xx_vidioc_querycap+0xb5/0x210 drivers/media/usb/zr364xx/zr364xx.c:706 v4l_querycap+0x12b/0x340 drivers/media/v4l2-core/v4l2-ioctl.c:1062 __video_do_ioctl+0x5bb/0xb40 drivers/media/v4l2-core/v4l2-ioctl.c:2874 video_usercopy+0x44e/0xf00 drivers/media/v4l2-core/v4l2-ioctl.c:3056 v4l2_ioctl+0x14e/0x1a0 drivers/media/v4l2-core/v4l2-dev.c:364 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xced/0x12f0 fs/ioctl.c:696 ksys_ioctl+0xa0/0xc0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x74/0xb0 fs/ioctl.c:718 do_syscall_64+0xcf/0x4f0 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f3b56d8b347 Code: 90 90 90 48 8b 05 f1 fa 2a 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 90 90 90 90 90 90 90 90 90 90 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d c1 fa 2a 00 31 d2 48 29 c2 64 RSP: 002b:00007ffe005d5d68 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f3b56d8b347 RDX: 00007ffe005d5d70 RSI: 0000000080685600 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000400884 R13: 00007ffe005d5ec0 R14: 0000000000000000 R15: 0000000000000000 ================================================================== For this device udev->product is not initialized and accessing it causes a NULL pointer deref. The fix is to check for NULL before strscpy() and copy empty string, if product is NULL Reported-by: syzbot+66010012fd4c531a1a96@syzkaller.appspotmail.com Signed-off-by:
Vandana BN <bnvandana@gmail.com> Signed-off-by:
-
Eric Biggers authored
[ Upstream commit eeacfdc6 ] Replace some BUG_ON()s with WARN_ON_ONCE() and returning an error code, and move the check for len divisible by FS_CRYPTO_BLOCK_SIZE into fscrypt_crypt_block() so that it's done for both encryption and decryption, not just encryption. Reviewed-by:
Chandan Rajendra <chandan@linux.ibm.com> Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
sumitg authored
[ Upstream commit 3e0f7243 ] Fixing use-after-free within __v4l2_ctrl_handler_setup(). Memory is being freed with kfree(new_ref) for duplicate control reference entry but ctrl->cluster pointer is still referring to freed duplicate entry resulting in error on access. Change done to update cluster pointer only when new control reference is added. ================================================================== BUG: KASAN: use-after-free in __v4l2_ctrl_handler_setup+0x388/0x428 Read of size 8 at addr ffffffc324e78618 by task systemd-udevd/312 Allocated by task 312: Freed by task 312: The buggy address belongs to the object at ffffffc324e78600 which belongs to the cache kmalloc-64 of size 64 The buggy address is located 24 bytes inside of 64-byte region [ffffffc324e78600, ffffffc324e78640) The buggy address belongs to the page: page:ffffffbf0c939e00 count:1 mapcount:0 mapping: (null) index:0xffffffc324e78f80 flags: 0x4000000000000100(slab) raw: 4000000000000100 0000000000000000 ffffffc324e78f80 000000018020001a raw: 0000000000000000 0000000100000001 ffffffc37040fb80 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffffc324e78500: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffffffc324e78580: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc >ffffffc324e78600: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ^ ffffffc324e78680: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc ffffffc324e78700: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc ================================================================== Suggested-by:
Sumit Gupta <sumitg@nvidia.com> Signed-off-by:
-
