- 05 Sep, 2015 40 commits
-
-
Alexandre Belloni authored
Remove useless error messages, at that point, the user already knows something went wrong but will not be able to do anything about it anyway. It is also highly unlikely that some registers are readable/writable but not some other ones. Also, transform rx8025_read_reg to be more resemblant to i2c_smbus_read_byte_data() Signed-off-by:Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Alexandre Belloni authored
Stop setting the time to epoch when it is invalid. The proper way to handle that is to return an error when it is invalid instead of returning an incorrect value. Signed-off-by: -
Alexandre Belloni authored
The datasheet specifies that transfer mode must be 0 for write and either 0x4 (simplified read) or 0 (standard read). 0x8 is not specified, use standard mode. Signed-off-by: -
Alexandre Belloni authored
The hardware is only capable of handling dates between 2000 and 2099, enforce that. Signed-off-by: -
Alexandre Belloni authored
Use BIT() instead of hand coding. Signed-off-by: -
Alexandre Belloni authored
It is useless to print a message when probe fails as the user is already aware that it failed. Signed-off-by: -
Alexandre Belloni authored
Use devm_request_threaded_irq() so it is not necessary to call free_irq() explicitly. Signed-off-by: -
Alexandre Belloni authored
The driver currently emulates the concept of threaded IRQ using a workqueue, switch to threaded IRQ instead. Signed-off-by: -
Alexandre Belloni authored
Remove the useless includes and order the remaining ones alphabetically. Signed-off-by: -
Vladimir Zapolskiy authored
The change removes redundant sysfs binary file boundary checks, since this task is already done on caller side in fs/sysfs/file.c Signed-off-by:
Vladimir Zapolskiy <vz@mleia.com> Signed-off-by:
-
Vladimir Zapolskiy authored
The change removes redundant sysfs binary file boundary checks, since this task is already done on caller side in fs/sysfs/file.c Signed-off-by:
-
Vladimir Zapolskiy authored
The change removes redundant sysfs binary file boundary checks, since this task is already done on caller side in fs/sysfs/file.c Signed-off-by:
-
Vladimir Zapolskiy authored
The change removes redundant sysfs binary file boundary checks, since this task is already done on caller side in fs/sysfs/file.c Spinlock acquisition/release is moved out of the loop body to get atomic states of NVRAM reading and writing operations. Signed-off-by:
-
Vladimir Zapolskiy authored
The change removes redundant sysfs binary file boundary checks, since this task is already done on caller side in fs/sysfs/file.c Signed-off-by:
-
Vladimir Zapolskiy authored
The change removes redundant sysfs binary file boundary checks, since this task is already done on caller side in fs/sysfs/file.c Signed-off-by:
-
Vladimir Zapolskiy authored
The change removes redundant sysfs binary file boundary checks, since this task is already done on caller side in fs/sysfs/file.c The change enables burst mode of access to SRAM for any read()/write() operations, it is worth to mention that this may influence on userspace, for instance prior to the change read(fd, buf, 1); read(fd, buf + 1, 1); and read(fd, buf, 2); sequences of syscalls over DS1511's sysfs "nvram" fd led to different DS1511 state changes and/or buf content, if some userspace applications are written specifically for DS1511 and exploit this strange "feature", they may be impacted. Also the change corrects NVRAM size accessible to userspace from 255 bytes to 256 bytes. Signed-off-by:
-
Vladimir Zapolskiy authored
The change removes redundant sysfs binary file boundary checks, since this task is already done on caller side in fs/sysfs/file.c Signed-off-by:
-
Vladimir Zapolskiy authored
The change removes redundant sysfs binary file boundary checks, since this task is already done on caller side in fs/sysfs/file.c Signed-off-by:
-
Vladimir Zapolskiy authored
The change removes redundant sysfs binary file boundary checks, since this task is already done on caller size in fs/sysfs/file.c Signed-off-by:
-
Vladimir Zapolskiy authored
The change removes redundant sysfs binary file boundary checks, since this task is already done on caller side in fs/sysfs/file.c Signed-off-by:
-
Sylvain Chouleur authored
If century field is supported by the RTC CMOS device, then we should use it and then do not consider years greater that 169 as an error. For information, the year field of the rtc_time structure contains the value to add to 1970 to obtain the current year. This was a hack to be able to support years for 1970 to 2069. This patch remains compatible with this implementation. Signed-off-by:
Sylvain Chouleur <sylvain.chouleur@intel.com> Signed-off-by:
-
Alexandre Belloni authored
Commit dca1a4b5 ("clk: at91: keep slow clk enabled to prevent system hang") added a workaround for the slow clock as it is not properly handled by its users. Get and use the slow clock as it is necessary for the at91rm9200 rtc. Acked-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
kbuild test robot authored
drivers/rtc/rtc-gemini.c:151:1-3: WARNING: PTR_ERR_OR_ZERO can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: scripts/coccinelle/api/ptr_ret.cocci Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
-
viresh kumar authored
IS_ERR(_OR_NULL) already contain an 'unlikely' compiler flag and there is no need to do that again from its callers. Drop it. gemini driver was using likely() for a failure case while the rtc driver is getting registered. That looks wrong and it should really be unlikely. But because we are killing all the unlikely() flags, lets kill that too. Signed-off-by:
Hans Ulli Kroll <ulli.kroll@googlemail.com> Signed-off-by:
-
Alexandre Belloni authored
Sort included headers alphabetically. Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com>
-
Alexandre Belloni authored
See help for clk_get_rate(): "obtain the current clock rate (in Hz) for a clock source. This is only valid once the clock source has been enabled." It currently returns the correct value but that may not stay that way. Signed-off-by:
-
Alexandre Belloni authored
Sort included headers alphabetically. Signed-off-by:
-
Alexandre Belloni authored
rtc->sclk necessarily points to a valid clocks at this point. Else the probe would have aborted. Signed-off-by:
-
Alexandre Belloni authored
In case of a probe error, it is possible to abort after issuing clk_prepare_enable(). Ensure the clock is disabled and unprepared in that case. Signed-off-by:
-
Leo Yan authored
The email address missed character ">", so add it. Signed-off-by:
Leo Yan <leo.yan@linaro.org> Signed-off-by:
-
Javier Martinez Canillas authored
The I2C core always reports the MODALIAS uevent as "i2c:<client name" regardless if the driver was matched using the I2C id_table or the of_match_table. So technically there's no need for a driver to export the OF table since currently it's not used. In fact, the I2C device ID table is mandatory for I2C drivers since a i2c_device_id is passed to the driver's probe function even if the I2C core used the OF table to match the driver. And since the I2C core uses different tables, OF-only drivers needs to have duplicated data that has to be kept in sync and also the dev node compatible manufacturer prefix is stripped when reporting the MODALIAS. To avoid the above, the I2C core behavior may be changed in the future to not require an I2C device table for OF-only drivers and report the OF module alias. So, it's better to also export the OF table to prevent breaking module autoloading if that happens. Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
-
Adrian Huang authored
Commit d5a1c7e3 ("rtc-cmos: Add an alarm disable quirk") that added a special quirk is not needed because [PATCH 1/2] of this patchset makes the kernel more robust: rtc-cmos: Cancel alarm timer if alarm time is equal to now+1 seconds Signed-off-by:
Adrian Huang <ahuang12@lenovo.com> Tested-by:
Egbert Eich <eich@suse.de> Tested-by:
Diego Ercolani <diego.ercolani@gmail.com> Cc: Borislav Petkov <bp@suse.de> Signed-off-by:
-
Adrian Huang authored
Steps to reproduce the problem: 1) Enable RTC wake-up option in BIOS Setup 2) Issue one of these commands in the OS: "poweroff" or "shutdown -h now" 3) System will shut down and then reboot automatically Root-cause of the issue: 1) During the shutdown process, the hwclock utility is used to save the system clock to hardware clock (RTC). 2) The hwclock utility invokes ioctl() with RTC_UIE_ON. The kernel configures the RTC alarm for the periodic interrupt (every 1 second). 3) The hwclock uitlity closes the /dev/rtc0 device, and the kernel disables the RTC alarm irq (AIE bit of Register B) via ioctl() with RTC_UIE_OFF. But, the configured alarm time is the current_time + 1. 4) After the next 1 second is elapsed, the AF (alarm interrupt flag) of Register C is set. 5) The S5 handler in BIOS is invoked to configure alarm registers (enable AIE bit and configure alarm date/time). But, BIOS does not clear the previous interrupt status during alarm configuration. Therefore, "AF=AIE=1" causes the rtc device to trigger an interrupt. 6) So, the machine reboots automatically right after shutdown. This patch cancels the alarm timer if the following condictions are met (suggested by Alexandre): 1) The configured alarm time is equal to current_time + 1 seconds. 2) The AIE timer is not in use. The member 'alarm_expires' is introduced in struct cmos_rtc because of the following reasons: 1) The configured alarm time can be retrieved from cmos_read_alarm(), but we need to take the 'wrapped timestamp' and 'time rollover' into consideration. The function __rtc_read_alarm() eliminates the concerns. To avoid the duplicated code in the lower level RTC driver, invoking __rtc_read_alarm from the lower level RTC driver is not encouraged. Moreover, the compilation error 'the undefined __rtc_read_alarm" is observed if the lower level RTC driver is compiled as a kernel module. 2) The uie_rtctimer.node.expires and aie_timer.node.expires can be retrieved for the configured alarm time. But, the problem is that either of them might configure the CMOS alarm time. We cannot make sure UIE timer or AIE tiemr configured the CMOS alarm time before. (uie_rtctimer or aie_timer is enabled and then is disabled). 3) The patch introduces the member 'alarm_expires' to keep the newly configured alarm time, so the above-mentioned concerns can be eliminated. The issue goes away after 20-time shutdown tests. Signed-off-by:
-
S Twiss authored
Add DA9062 RTC support into the existing DA9063 RTC driver component by using generic access tables for common register and bit mask definitions. The following change will add generic register and bit mask support to the DA9063 RTC. The changes are slightly complicated by requiring support for three register sets: DA9063-AD, DA9063-BB and DA9062-AA. The following alterations have been made to the DA9063 RTC: - Addition of a da9063_compatible_rtc_regmap structure to hold all generic registers and bitmasks for this type of RTC component. - A re-write of struct da9063 to use pointers for regmap and compatible registers/masks definitions - Addition of a of_device_id table for DA9063 and DA9062 defaults - Refactoring functions to use struct da9063_compatible_rtc accesses to generic registers/masks instead of using defines from registers.h - Re-work of da9063_rtc_probe() to use of_match_node() and dev_get_regmap() to provide initialisation of generic registers and masks and access to regmap Signed-off-by:
Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by:
-
Henry Chen authored
Implement the suspend/resume function in order to control rtc's irq_wake flag and handle as wakeup source. Signed-off-by:
Henry Chen <henryc.chen@mediatek.com> Acked-by:
Eddie Huang <eddie.huang@mediatek.com> Signed-off-by:
-
Dmitry Torokhov authored
Instead of creating wakealarm attribute manually, after the device has been registered, let's rely on facilities provided by the attribute groups to control which attributes are visible and which are not. This allows to create all needed attributes at once, at the same time that we register RTC class device. Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
-
Dmitry Torokhov authored
Instead of using older style DEVICE_ATTR for wakealarm attribute let's switch to using DEVICE_ATTR_RW that ensures consistent across the kernel permissions on the attribute. Signed-off-by:
-
Dmitry Torokhov authored
Users of rtc_does_wakealarm() return value treat it as boolean so let's change the signature accordingly. Signed-off-by:
-
Henri Roosen authored
Since commit e6229bec ("rtc: make rtc_update_irq callable with irqs enabled") rtc_update_irq() is callable with irqs enabled. Signed-off-by:
Henri Roosen <henriroosen@gmail.com> Signed-off-by:
-
Octavian Purdila authored
Since dab472eb ("i2c / ACPI: Use 0 to indicate that device does not have interrupt assigned"), 0 is not a valid i2c client irq anymore, so change all driver's checks accordingly. The same issue occurs when the device is instantiated via device tree with no IRQ, or from the i2c sysfs interface, even before the patch above. Signed-off-by:
Octavian Purdila <octavian.purdila@intel.com> Reviewed-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
-
