- 25 Mar, 2020 12 commits
-
-
Arnd Bergmann authored
Merge tag 'v5.6-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/soc pmic wrapper: - add support for MT6779 SoC cmdq-helper: - set knows_txdone in mailbox client * tag 'v5.6-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: soc: mediatek: pwrap: add support for MT6359 PMIC soc: mediatek: pwrap: add pwrap driver for MT6779 SoCs dt-bindings: pwrap: mediatek: add pwrap support for MT6779 soc: mediatek: knows_txdone needs to be set in Mediatek CMDQ helper Link: https://lore.kernel.org/r/61165e91-f211-ad37-a81c-cbf3ff69fa1b@gmail.comSigned-off-by:
Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'imx-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/soc i.MX SoC changes for 5.7: - A number of cleanups from Anson Huang to remove unneeded includes, drop unnecessary newlines and base check etc. - Apply Cortex-A9 specific errata only to Cortex-A9 based i.MX SoCs and avoid impacting Cortex-A7 based designs. * tag 'imx-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx: Drop unnecessary src_base check ARM: imx: Remove unnecessary blank lines ARM: imx: Add missing of_node_put() ARM: imx: Remove unused include of linux/of.h on mach-imx6sl.c ARM: imx: Remove unused includes on mach-imx6q.c ARM: imx: Remove unused include of linux/irqchip/arm-gic.h ARM: imx: limit errata selection to Cortex-A9 based designs Link: https://lore.kernel.org/r/20200318051918.32579-2-shawnguo@kernel.orgSigned-off-by:
-
git://git.infradead.org/linux-mvebuArnd Bergmann authored
mvebu arm for 5.6 (part 1) Various cleanup: On Orion5x: - Drop unneeded select of PCI_DOMAINS_GENERIC - Remove unneeded variable ret - Replace setup_irq() by request_irq() On Dove: Mark dove_io_desc as __maybe_unused * tag 'mvebu-arm-5.7-1' of git://git.infradead.org/linux-mvebu: arm: mach-dove: Mark dove_io_desc as __maybe_unused ARM: orion: replace setup_irq() by request_irq() ARM: orion5x: ts78xx: Remove unneeded variable ret ARM: orion5x: Drop unneeded select of PCI_DOMAINS_GENERIC Link: https://lore.kernel.org/r/87eetux7um.fsf@FE-laptopSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'tegra-for-5.7-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/soc ARM: tegra: Core changes for v5.7-rc1 These patches a preparatory work to move the CPU idle drivers into drivers/cpuidle. * tag 'tegra-for-5.7-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: cpuidle: Remove unnecessary memory barrier ARM: tegra: cpuidle: Make abort_flag atomic ARM: tegra: cpuidle: Handle case where secondary CPU hangs on entering LP2 ARM: tegra: Make outer_disable() open-coded ARM: tegra: Rename some of the newly exposed PM functions ARM: tegra: Expose PM functions required for new cpuidle driver ARM: tegra: Propagate error from tegra_idle_lp2_last() ARM: tegra: Change tegra_set_cpu_in_lp2() type to void ARM: tegra: Remove pen-locking from cpuidle-tegra20 ARM: tegra: Add tegra_pm_park_secondary_cpu() ARM: tegra: Compile sleep-tegra20/30.S unconditionally Link: https://lore.kernel.org/r/20200313165848.2915133-5-thierry.reding@gmail.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'tegra-for-5.7-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/soc soc/tegra: Changes for v5.7-rc1 These changes implement various clocks that are controlled by the PMC and add support for configuring the voltage level of some pins (needed for example to support high-speed modes on the SD/MMC interfaces). * tag 'tegra-for-5.7-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: soc/tegra: pmc: Cleanup whitespace usage soc/tegra: pmc: Add pins for Tegra194 soc/tegra: Add support for 32 kHz blink clock soc/tegra: Add Tegra PMC clocks registration into PMC driver dt-bindings: usb: Add NVIDIA Tegra XUSB device mode controller binding dt-bindings: phy: tegra-xusb: Add usb-role-switch dt-bindings: phy: tegra: Add Tegra194 support dt-bindings: soc: tegra-pmc: Add ID for Tegra PMC 32 kHz blink clock dt-bindings: soc: tegra-pmc: Add Tegra PMC clock bindings dt-bindings: tegra: Convert Tegra PMC bindings to YAML dt-bindings: clock: tegra: Add IDs for OSC clocks Link: https://lore.kernel.org/r/20200313165848.2915133-3-thierry.reding@gmail.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'stm32-soc-for-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/soc STM32 SoC updates for v5.7, round 1 Highlights: ---------- - Add early console support for all STM32 SoCs: F4/F7/H7/MP1 * tag 'stm32-soc-for-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: debug: stm32: add UART early console support for STM32MP1 ARM: debug: stm32: add UART early console support for STM32H7 ARM: debug: stm32: add UART early console configuration for STM32F7 ARM: debug: stm32: add UART early console configuration for STM32F4 Link: https://lore.kernel.org/r/4e427e37-99c9-239a-f3f8-a3bf50eb1eb2@st.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'sunxi-core-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/soc Allwinner Core Changes for v5.7 Just one change for our mach code for including the correct clk header. * tag 'sunxi-core-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: sunxi: Replace <linux/clk-provider.h> by <linux/of_clk.h> Link: https://lore.kernel.org/r/20200313055342.GA19760@wens.csie.orgSigned-off-by:
-
https://github.com/Broadcom/stblinuxArnd Bergmann authored
This pull request contains Broadcom ARM64 SoCs changes for 5.7, please pull the following: - Geert drops the non-existent HAVE_ARM_ARCH_TIMER symbol select for ARCH_BCM2835 * tag 'arm-soc/for-5.7/soc-arm64' of https://github.com/Broadcom/stblinux: arm64: bcm2835: Drop select of nonexistent HAVE_ARM_ARCH_TIMER Link: https://lore.kernel.org/r/20200311212012.9418-4-f.fainelli@gmail.comSigned-off-by:
-
https://github.com/Broadcom/stblinuxArnd Bergmann authored
This pull request contains Broadcom ARM-based SoCs changes for 5.7, please pull the following: - Geert drops redundant selects for Broadcom SoCs which are already implied by ARCH_MULTI_V6_V7 * tag 'arm-soc/for-5.7/soc' of https://github.com/Broadcom/stblinux: ARM: bcm: Drop unneeded select of PCI_DOMAINS_GENERIC, HAVE_SMP, TIMER_OF Link: https://lore.kernel.org/r/20200311212012.9418-3-f.fainelli@gmail.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'omap-for-v5.7/pm33xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc PM changes for am335x and am437x for v5.7 merge window A series of changes from Dave Gerlach to enable basic cpuidle support for am335x and am437x based on generic cpuidle-arm driver. * tag 'omap-for-v5.7/pm33xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: omap2plus_defconfig: Add CONFIG_ARM_CPUIDLE soc: ti: pm33xx: Add base cpuidle support ARM: OMAP2+: pm33xx-core: Extend platform_data ops for cpuidle ARM: OMAP2+: pm33xx-core: Add cpuidle_ops for am335x/am437x dt-bindings: arm: cpu: Add TI AM335x and AM437x enable method Link: https://lore.kernel.org/r/pull-1583511417-919838@atomide.com-2Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'omap-for-v5.7/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc SoC changes for omaps for v5.7 merge window A change to improve the warning output for device tree data mismatch as compared to legacy platform data for ti-sysc related interconnect target modules. And change omap1 to request_irq() instead of setup_irq(). * tag 'omap-for-v5.7/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP: replace setup_irq() by request_irq() ARM: OMAP2+: Improve handling of ti-sysc related sysc_fields Link: https://lore.kernel.org/r/pull-1583511417-919838@atomide.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'renesas-arm-soc-for-v5.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/soc Renesas ARM SoC updates for v5.7 - Enable ARM global timer on Cortex-A9 MPCore SoCs, - A minor cleanup. * tag 'renesas-arm-soc-for-v5.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: shmobile: Replace <linux/clk-provider.h> by <linux/of_clk.h> ARM: shmobile: Enable ARM_GLOBAL_TIMER on Cortex-A9 MPCore SoCs Link: https://lore.kernel.org/r/20200226110221.19288-3-geert+renesas@glider.beSigned-off-by:
-
- 13 Mar, 2020 20 commits
-
-
Vincenzo Frascino authored
Without this, we get the warnings below when CONFIG_MMU is disabled: linux/arch/arm/mach-dove/common.c:51:24: warning: ‘dove_io_desc’ defined but not used [-Wunused-variable] static struct map_desc dove_io_desc[] __initdata = { ^~~~~~~~~~~~ Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Gregory Clement <gregory.clement@bootlin.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by:Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by:
Gregory CLEMENT <gregory.clement@bootlin.com>
-
afzal mohammed authored
request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready. Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized. Hence replace setup_irq() by request_irq(). [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanosSigned-off-by:
afzal mohammed <afzal.mohd.ma@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Erwan Le Ray authored
Add support of early console for STM32MP1. Default UART instance is UART4, but other UART instances can be configured by setting physical and virtual base addresses in menuconfig. Signed-off-by:
Erwan Le Ray <erwan.leray@st.com> Signed-off-by:
Alexandre Torgue <alexandre.torgue@st.com>
-
Erwan Le Ray authored
Add support of early console for STM32H7. Default UART instance is USART1, but other UART instances can be configured by setting physical and virtual base addresses in menuconfig. Signed-off-by:
-
Erwan Le Ray authored
Early console is hardcoded on USART1 in current implementation. With this patch, default UART instance is USART1, but other UART instances can be configured by setting physical and virtual base addresses in menuconfig. Signed-off-by:
-
Erwan Le Ray authored
Early console is hardcoded on USART1 in current implementation. With this patch, default UART instance is USART1, but other UART instances can be configured by setting physical and virtual base addresses in menuconfig. Signed-off-by:
-
Dmitry Osipenko authored
There is no good justification for smp_rmb() after returning from LP2 because there are no memory operations that require SMP synchronization. Thus remove the confusing barrier. Acked-by:
Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by:
Peter Geis <pgwipeout@gmail.com> Tested-by:
Jasper Korten <jja2000@gmail.com> Tested-by:
David Heidelberg <david@ixit.cz> Tested-by:
Nicolas Chauvet <kwizart@gmail.com> Acked-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
Thierry Reding <treding@nvidia.com>
-
Dmitry Osipenko authored
Replace memory accessors with atomic API just to make code consistent with the abort_barrier. The new variant may be even more correct now since atomic_read() will prevent compiler from generating wrong things like carrying abort_flag value in a register instead of re-fetching it from memory. Acked-by:
-
Dmitry Osipenko authored
It is possible that something may go wrong with the secondary CPU, in that case it is much nicer to get a dump of the flow-controller state before hanging machine. Acked-by:
-
Dmitry Osipenko authored
The outer_disable() of Tegra's suspend code is open-coded now since that helper produces spurious warning message about secondary CPUs being online when CPU enters into LP2 from cpuidle. The secondaries are actually halted by the cpuidle driver on entering into LP2 idle-state, but the online status is not touched by the cpuidle. This fixes a storm of warnings once LP2 idling state is enabled on Tegra30. The outer_disable() helper has sanity checks for interrupts and secondary CPUs being disabled and we are pretty confident about the interrupts state during of CPU idling / system suspend. The rail-off status check is added in this patch as equivalent for the "num_online_cpus() > 1". Acked-by:
-
Dmitry Osipenko authored
Rename some of the recently exposed PM functions, prefixing them with "tegra_pm_" in order to make the naming of the PM functions consistent. Acked-by:
-
Dmitry Osipenko authored
The upcoming unified CPUIDLE driver will be added to the drivers/cpuidle/ directory and it will require all these exposed Tegra PM-core functions. Acked-by:
-
Thierry Reding authored
Avoid using a mixture of tabs and spaces within tables to make them easier to read and more consistently formatted. Signed-off-by: -
Venkat Reddy Talla authored
Extend the Tegra194 IO pad table with additional information such as pin names and 1.8/3.3 V settings to allow a table of voltage control pins to generated from it. This is similar to what's done for older chips and is needed to support high-speed modes for SDHCI where switching the pins to 1.8V or 3.3V is necessary. Signed-off-by:
Venkat Reddy Talla <vreddytalla@nvidia.com> Signed-off-by:
-
Sowjanya Komatineni authored
Tegra PMC has blink control to output 32 kHz clock out to Tegra blink pin. Blink pad DPD state and enable controls are part of Tegra PMC register space. Currently Tegra clock driver registers blink control by passing PMC address and register offset to clk_register_gate which performs direct PMC access during clk_ops and with this when PMC is in secure mode, any access from non-secure world does not go through. This patch adds blink control registration to the Tegra PMC driver using PMC specific clock gate operations that use tegra_pmc_readl() and tegra_pmc_writel() to support both secure mode and non-secure mode PMC register access. Tested-by:
Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by:
-
Sowjanya Komatineni authored
Tegra PMC has clk_out_1, clk_out_2, and clk_out_3 clocks and currently these PMC clocks are registered by Tegra clock driver with each clock as separate mux and gate clocks using clk_register_mux and clk_register_gate by passing PMC base address and register offsets and PMC programming for these clocks happens through direct PMC access by the clock driver. With this, when PMC is in secure mode any direct PMC access from the non-secure world does not go through and these clocks will not be functional. This patch adds these PMC clocks registration to pmc driver with PMC as a clock provider and registers each clock as single clock. clk_ops callback implementations for these clocks uses tegra_pmc_readl and tegra_pmc_writel which supports PMC programming in both secure mode and non-secure mode. Tested-by:
-
Thierry Reding authored
-
Nagarjuna Kristam authored
Add device-tree binding documentation for the XUSB device mode controller present on Tegra210 and Tegra186 SoC. This controller supports the USB 3.0 specification. Signed-off-by:
Nagarjuna Kristam <nkristam@nvidia.com> Reviewed-by:
Rob Herring <robh@kernel.org> Acked-by:
-
Nagarjuna Kristam authored
Add usb-role-switch property for Tegra210 and Tegra186 platforms. This entry is used by XUSB pad controller driver to register for role changes for OTG/Peripheral capable USB 2 ports. Signed-off-by:
-
JC Kuo authored
Extend the bindings to cover the set of features found in Tegra194. Note that, technically, there are four more supplies connected to the XUSB pad controller (DVDD_PEX, DVDD_PEX_PLL, HVDD_PEX and HVDD_PEX_PLL) , but the power sequencing requirements of Tegra194 require these to be under the control of the PMIC. Tegra194 XUSB PADCTL supports up to USB 3.1 Gen 2 speed, however, it is possible for some platforms have long signal trace that could not provide sufficient electrical environment for Gen 2 speed. This patch adds a "maximum-speed" property to usb3 ports which can be used to specify the maximum supported speed for any particular USB 3.1 port. For a port that is not capable of SuperSpeedPlus, "maximum-speed" property should carry "super-speed". Signed-off-by:
JC Kuo <jckuo@nvidia.com> Acked-by:
-
- 12 Mar, 2020 5 commits
-
-
Dmitry Osipenko authored
Technically cpu_suspend() may fail and it's never good to lose information about failure. For example things like cpuidle core could correctly sample idling time in the case of failure. Acked-by:
-
Dmitry Osipenko authored
The Tegra30 CPUIDLE driver has intention to check whether primary CPU was the last CPU that entered LP2 (CC6) idle-state, but that functionality never got utilized because driver never supported the CC6 state for the case where any secondary CPU is online. The new cpuidle driver will properly support CC6 on Tegra30, including the case where secondary CPUs are online, and that knowledge about what CPUs entered into CC6 won't be needed at all because new driver will use different approach by making use of the coupled idle-state and explicitly parking secondary CPUs before entering into CC6. Thus this patch is just a minor cleanup change. Acked-by:
-
Dmitry Osipenko authored
Pen-locking is meant to block CPU0 if CPU1 wakes up during of entering into LP2 because of some interrupt firing up, preventing unnecessary LP2 enter that will be resumed immediately. Apparently this case doesn't happen often in practice, I checked how often it takes place and found that after ~20 hours of browsing web, managing email, watching videos and idling (15+ hours) there is only a dozen of early LP2 entering abortions and they all happened while device was idling. Thus let's remove the pen-locking and make LP2 entering uninterruptible, simplifying code quite a lot. This will also become very handy for the upcoming unified cpuidle driver, allowing to have a common LP2 code-path across of different hardware generations. Acked-by:
-
Dmitry Osipenko authored
This function resembles tegra_cpu_die() of the hotplug code, but this variant is more suitable to be used for CPU PM because it's made specifically to be used by cpu_suspend(). In short this function puts secondary CPU offline, it will be used by the new CPUIDLE driver. Acked-by:
-
Dmitry Osipenko authored
The sleep-tegra*.S provides functionality required for suspend/resume and CPU hotplugging. The new unified CPUIDLE driver will support multiple hardware generations starting from Terga20 and ending with Tegra124, the driver will utilize functions that are provided by the assembly and thus it is cleaner to compile that code without any build-dependencies in order to avoid churning with #ifdef's. Acked-by:
-
- 11 Mar, 2020 2 commits
-
-
Anson Huang authored
src_base is already checked during src driver initialization, no need to check its availability again when using it. Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org>
-
Anson Huang authored
Remove unnecessary blank lines for cleanup. Signed-off-by:
-
- 10 Mar, 2020 1 commit
-
-
Geert Uytterhoeven authored
Support for Broadcom SoCs depends on ARCH_MULTI_V6_V7, and thus on ARCH_MULTIPLATFORM, which selects PCI_DOMAINS_GENERIC and TIMER_OF. Support for the various Broadcom IPROC architected SoCs depends on ARCH_MULTI_V7, which selects HAVE_SMP. Hence there is no need for the Broadcom-specific symbols to select any of them. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com>
-
