- 23 Mar, 2023 18 commits
-
-
Ondrej Zary authored
Now that paride is gone, pata_parport.h does not need to be in include/linux. Move it to drivers/ata/pata_parport. Reviewed-by:
Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by:
Ondrej Zary <linux@zary.sk> Signed-off-by:
Damien Le Moal <damien.lemoal@opensource.wdc.com>
-
Ondrej Zary authored
Remove obsolete changelogs from protocol drivers. Reviewed-by:
-
Ondrej Zary authored
Don't pass around a pointer to scratch buffer. Use local buffers in protocols that need it. Reviewed-by:
-
Ondrej Zary authored
verbose parameter of test_proto() is now unused, remove it. Reviewed-by:
-
Ondrej Zary authored
Remove now useless verbose parameter of bpck6 module. Reviewed-by:
-
Ondrej Zary authored
Merge log_adapter prints to single one, remove version print and meaningless VERSION defines. Reviewed-by:
-
Ondrej Zary authored
Use print_hex_* for debug dumps. Signed-off-by:
-
Ondrej Zary authored
Use dev_info/dev_err/dev_dbg instead of printk. Reviewed-by:
-
Ondrej Zary authored
scratch parameter of log_adapter() is only used by bpck driver. Remove it. Reviewed-by:
-
Ondrej Zary authored
verbose parameter of log_adapter() is unused, remove it. Reviewed-by:
-
Ondrej Zary authored
Remove typedef struct PIA and use struct pi_adapter directly. Fix formatting (excessive spaces) while at it. Reviewed-by:
-
Ondrej Zary authored
device is never set in pata_parport, remove it. Reviewed-by:
-
Ondrej Zary authored
Only bpck driver uses devtype but it never gets set in pata_parport. Remove it. As most bpck devices are CD-ROMs, always run the code that depends on devtype == PI_PCD. Reviewed-by:
-
Ondrej Zary authored
Introduce module_pata_parport_driver macro and use it in protocol drivers to reduce boilerplate code. Remove paride_(un)register compatibility defines. Reviewed-by:
-
Ondrej Zary authored
bpck6 prints some useless messages on module_init. Remove them. Reviewed-by:
-
Ondrej Zary authored
Convert comm and kbic drivers to use standard swab16. Remove pi_swab16 and pi_swab32. Reviewed-by:
-
Ondrej Zary authored
Only unit 0 is probed after registering a protocol driver or attaching a new parport. This causes bpck and bpck6 devices to be not detected automatically. Probe all units just like in manual device creation (using sysfs). Reviewed-by:
-
Ondrej Zary authored
CONFIG_PARIDE_EPATC8 was renamed to CONFIG_PATA_PARPORT_EPATC8 but epat.c was not updated to reflect that. Update it. Reported-by:
-
- 19 Mar, 2023 16 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: - Fix setting affinity of hwlat threads in containers Using sched_set_affinity() has unwanted side effects when being called within a container. Use set_cpus_allowed_ptr() instead - Fix per cpu thread management of the hwlat tracer: - Do not start per_cpu threads if one is already running for the CPU - When starting per_cpu threads, do not clear the kthread variable as it may already be set to running per cpu threads - Fix return value for test_gen_kprobe_cmd() On error the return value was overwritten by being set to the result of the call from kprobe_event_delete(), which would likely succeed, and thus have the function return success - Fix splice() reads from the trace file that was broken by commit 36e2c742 ("fs: don't allow splice read/write without explicit ops") - Remove obsolete and confusing comment in ring_buffer.c The original design of the ring buffer used struct page flags for tricks to optimize, which was shortly removed due to them being tricks. But a comment for those tricks remained - Set local functions and variables to static * tag 'trace-v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/hwlat: Replace sched_setaffinity with set_cpus_allowed_ptr ring-buffer: remove obsolete comment for free_buffer_page() tracing: Make splice_read available again ftrace: Set direct_ops storage-class-specifier to static trace/hwlat: Do not start per-cpu thread if it is already running trace/hwlat: Do not wipe the contents of per-cpu thread data tracing/osnoise: set several trace_osnoise.c variables storage-class-specifier to static tracing: Fix wrong return in kprobe_event_gen_test.c -
Costa Shulyupin authored
There is a problem with the behavior of hwlat in a container, resulting in incorrect output. A warning message is generated: "cpumask changed while in round-robin mode, switching to mode none", and the tracing_cpumask is ignored. This issue arises because the kernel thread, hwlatd, is not a part of the container, and the function sched_setaffinity is unable to locate it using its PID. Additionally, the task_struct of hwlatd is already known. Ultimately, the function set_cpus_allowed_ptr achieves the same outcome as sched_setaffinity, but employs task_struct instead of PID. Test case: # cd /sys/kernel/tracing # echo 0 > tracing_on # echo round-robin > hwlat_detector/mode # echo hwlat > current_tracer # unshare --fork --pid bash -c 'echo 1 > tracing_on' # dmesg -c Actual behavior: [573502.809060] hwlat_detector: cpumask changed while in round-robin mode, switching to mode none Link: https://lore.kernel.org/linux-trace-kernel/20230316144535.1004952-1-costa.shul@redhat.com Cc: Masami Hiramatsu <mhiramat@kernel.org> Fixes: 0330f7aa ("tracing: Have hwlat trace migrate across tracing_cpumask CPUs") Signed-off-by:
Costa Shulyupin <costa.shul@redhat.com> Acked-by:
Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by:
Steven Rostedt (Google) <rostedt@goodmis.org>
-
Vlastimil Babka authored
The comment refers to mm/slob.c which is being removed. It comes from commit ed56829c ("ring_buffer: reset buffer page when freeing") and according to Steven the borrowed code was a page mapcount and mapping reset, which was later removed by commit e4c2ce82 ("ring_buffer: allocate buffer page pointer"). Thus the comment is not accurate anyway, remove it. Link: https://lore.kernel.org/linux-trace-kernel/20230315142446.27040-1-vbabka@suse.cz Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Reported-by:
Mike Rapoport <mike.rapoport@gmail.com> Suggested-by:
Vlastimil Babka <vbabka@suse.cz> Reviewed-by:
Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by:
-
Sung-hun Kim authored
Since the commit 36e2c742 ("fs: don't allow splice read/write without explicit ops") is applied to the kernel, splice() and sendfile() calls on the trace file (/sys/kernel/debug/tracing /trace) return EINVAL. This patch restores these system calls by initializing splice_read in file_operations of the trace file. This patch only enables such functionalities for the read case. Link: https://lore.kernel.org/linux-trace-kernel/20230314013707.28814-1-sfoon.kim@samsung.com Cc: stable@vger.kernel.org Fixes: 36e2c742 ("fs: don't allow splice read/write without explicit ops") Signed-off-by:
Sung-hun Kim <sfoon.kim@samsung.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial driver fixes from Greg KH: "Here are some small tty and serial driver fixes for 6.3-rc3 to resolve some reported issues. They include: - 8250 driver Kconfig issue pointed out by you that showed up in -rc1 - qcom-geni serial driver fixes - various 8250 driver fixes for reported problems - fsl_lpuart driver fixes - serdev fix for regression in -rc1 - vt.c bugfix All have been in linux-next for over a week with no reported problems" * tag 'tty-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: vt: protect KD_FONT_OP_GET_TALL from unbound access serial: qcom-geni: drop bogus uart_write_wakeup() serial: qcom-geni: fix mapping of empty DMA buffer serial: qcom-geni: fix DMA mapping leak on shutdown serial: qcom-geni: fix console shutdown hang serdev: Set fwnode for serdev devices tty: serial: fsl_lpuart: fix race on RX DMA shutdown serial: 8250_pci1xxxx: Disable SERIAL_8250_PCI1XXXX config by default serial: 8250_fsl: fix handle_irq locking serial: 8250_em: Fix UART port type serial: 8250: ASPEED_VUART: select REGMAP instead of depending on it tty: serial: fsl_lpuart: skip waiting for transmission complete when UARTCTRL_SBK is asserted Revert "tty: serial: fsl_lpuart: adjust SERIAL_FSL_LPUART_CONSOLE config dependency"
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are a few small char/misc/other driver subsystem patches to resolve reported problems for 6.3-rc3. Included in here are: - Interconnect driver fixes for reported problems - Memory driver fixes for reported problems - nvmem core fix - firmware driver fix for reported problem All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (23 commits) memory: tegra30-emc: fix interconnect registration race memory: tegra20-emc: fix interconnect registration race memory: tegra124-emc: fix interconnect registration race memory: tegra: fix interconnect registration race interconnect: exynos: drop redundant link destroy interconnect: exynos: fix registration race interconnect: exynos: fix node leak in probe PM QoS error path interconnect: qcom: msm8974: fix registration race interconnect: qcom: rpmh: fix registration race interconnect: qcom: rpmh: fix probe child-node error handling interconnect: qcom: rpm: fix registration race nvmem: core: return -ENOENT if nvmem cell is not found firmware: xilinx: don't make a sleepable memory allocation from an atomic context interconnect: qcom: rpm: fix probe child-node error handling interconnect: qcom: osm-l3: fix registration race interconnect: imx: fix registration race interconnect: fix provider registration API interconnect: fix icc_provider_del() error handling interconnect: fix mem leak when freeing nodes interconnect: qcom: qcm2290: Fix MASTER_SNOC_BIMC_NRT ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull RAS fix from Borislav Petkov: - Flush out logged errors immediately after MCA banks configuration changes over sysfs have been done instead of waiting until something else triggers the workqueue later - another error or the polling interval cycle is reached * tag 'ras_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Make sure logged MCEs are processed after sysfs update
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Borislav Petkov: - Check whether sibling events have been deactivated before adding them to groups - Update the proper event time tracking variable depending on the event type - Fix a memory overwrite issue due to using the wrong function argument when outputting perf events * tag 'perf_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix check before add_event_to_groups() in perf_group_detach() perf: fix perf_event_context->time perf/core: Fix perf_output_begin parameter is incorrectly invoked in perf_event_bpf_output
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: "There's a little bit more 'movement' in there for my taste but it needs to happen and should make the code better after it. - Check cmdline_find_option()'s return value before further processing - Clear temporary storage in the resctrl code to prevent access to an unexistent MSR - Add a simple throttling mechanism to protect the hypervisor from potentially malicious SEV guests issuing requests in rapid succession. In order to not jeopardize the sanity of everyone involved in maintaining this code, the request issuing side has received a cleanup, split in more or less trivial, small and digestible pieces. Otherwise, the code was threatening to become an unmaintainable mess. Therefore, that cleanup is marked indirectly also for stable so that there's no differences between the upstream code and the stable variant when it comes down to backporting more there" * tag 'x86_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Fix use of uninitialized buffer in sme_enable() x86/resctrl: Clear staged_config[] before and after it is used virt/coco/sev-guest: Add throttling awareness virt/coco/sev-guest: Convert the sw_exit_info_2 checking to a switch-case virt/coco/sev-guest: Do some code style cleanups virt/coco/sev-guest: Carve out the request issuing logic into a helper virt/coco/sev-guest: Remove the disable_vmpck label in handle_guest_request() virt/coco/sev-guest: Simplify extended guest request handling virt/coco/sev-guest: Check SEV_SNP attribute at probe time -
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fix from Ted Ts'o: "Fix a double unlock bug on an error path in ext4, found by smatch and syzkaller" * tag 'ext4_for_linus_urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix possible double unlock when moving a directory
-
Tom Rix authored
smatch reports this warning kernel/trace/ftrace.c:2594:19: warning: symbol 'direct_ops' was not declared. Should it be static? The variable direct_ops is only used in ftrace.c, so it should be static Link: https://lore.kernel.org/linux-trace-kernel/20230311135113.711824-1-trix@redhat.comSigned-off-by:
Tom Rix <trix@redhat.com> Acked-by:
Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by:
-
Tero Kristo authored
The hwlatd tracer will end up starting multiple per-cpu threads with the following script: #!/bin/sh cd /sys/kernel/debug/tracing echo 0 > tracing_on echo hwlat > current_tracer echo per-cpu > hwlat_detector/mode echo 100000 > hwlat_detector/width echo 200000 > hwlat_detector/window echo 1 > tracing_on To fix the issue, check if the hwlatd thread for the cpu is already running, before starting a new one. Along with the previous patch, this avoids running multiple instances of the same CPU thread on the system. Link: https://lore.kernel.org/all/20230302113654.2984709-1-tero.kristo@linux.intel.com/ Link: https://lkml.kernel.org/r/20230310100451.3948583-3-tero.kristo@linux.intel.com Cc: stable@vger.kernel.org Fixes: f46b1652 ("trace/hwlat: Implement the per-cpu mode") Signed-off-by:Tero Kristo <tero.kristo@linux.intel.com> Acked-by:
-
Tero Kristo authored
Do not wipe the contents of the per-cpu kthread data when starting the tracer, as this will completely forget about already running instances and can later start new additional per-cpu threads. Link: https://lore.kernel.org/all/20230302113654.2984709-1-tero.kristo@linux.intel.com/ Link: https://lkml.kernel.org/r/20230310100451.3948583-2-tero.kristo@linux.intel.com Cc: stable@vger.kernel.org Fixes: f46b1652 ("trace/hwlat: Implement the per-cpu mode") Signed-off-by:
-
Tom Rix authored
smatch reports several similar warnings kernel/trace/trace_osnoise.c:220:1: warning: symbol '__pcpu_scope_per_cpu_osnoise_var' was not declared. Should it be static? kernel/trace/trace_osnoise.c:243:1: warning: symbol '__pcpu_scope_per_cpu_timerlat_var' was not declared. Should it be static? kernel/trace/trace_osnoise.c:335:14: warning: symbol 'interface_lock' was not declared. Should it be static? kernel/trace/trace_osnoise.c:2242:5: warning: symbol 'timerlat_min_period' was not declared. Should it be static? kernel/trace/trace_osnoise.c:2243:5: warning: symbol 'timerlat_max_period' was not declared. Should it be static? These variables are only used in trace_osnoise.c, so it should be static Link: https://lore.kernel.org/linux-trace-kernel/20230309150414.4036764-1-trix@redhat.comSigned-off-by:
-
Anton Gusev authored
Overwriting the error code with the deletion result may cause the function to return 0 despite encountering an error. Commit b111545d ("tracing: Remove the useless value assignment in test_create_synth_event()") solves a similar issue by returning the original error code, so this patch does the same. Found by Linux Verification Center (linuxtesting.org) with SVACE. Link: https://lore.kernel.org/linux-trace-kernel/20230131075818.5322-1-aagusev@ispras.ruSigned-off-by:
Anton Gusev <aagusev@ispras.ru> Reviewed-by:
-
- 18 Mar, 2023 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdevLinus Torvalds authored
Pull fbdev fixes from Helge Deller: "The majority of lines changed is due to a code style cleanup in the pnmtologo helper program. Arnd removed the omap1 osk driver and the SIS fb driver is now orphaned. Other than that it's the usual bunch of small fixes and cleanups, e.g. prevent possible divide-by-zero in various fb drivers if the pixclock is zero and various conversions to devm_platform*() and of_property*() functions: - Drop omap1 osk driver - Various potential divide by zero pixclock fixes - Add pixelclock and fb_check_var() to stifb - Code style cleanups and indenting fixes" * tag 'fbdev-for-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: fbdev: Use of_property_present() for testing DT property presence fbdev: au1200fb: Fix potential divide by zero fbdev: lxfb: Fix potential divide by zero fbdev: intelfb: Fix potential divide by zero fbdev: nvidia: Fix potential divide by zero fbdev: stifb: Provide valid pixelclock and add fb_check_var() checks fbdev: omapfb: remove omap1 osk driver fbdev: xilinxfb: Use devm_platform_get_and_ioremap_resource() fbdev: wm8505fb: Use devm_platform_ioremap_resource() fbdev: pxa3xx-gcu: Use devm_platform_get_and_ioremap_resource() fbdev: Use of_property_read_bool() for boolean properties fbdev: clps711x-fb: Use devm_platform_get_and_ioremap_resource() fbdev: tgafb: Fix potential divide by zero MAINTAINERS: orphan SIS FRAMEBUFFER DRIVER fbdev: omapfb: cleanup inconsistent indentation drivers: video: logo: add SPDX comment, remove GPL notice in pnmtologo.c drivers: video: logo: fix code style issues in pnmtologo.c
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Exclude kallsyms_seqs_of_names from kallsyms to fix build error - Fix 'make kernelrelease' for external module builds - Get the Debian source package compilable again - Fix the wrong uname when Debian packages are built with the KDEB_PKGVERSION option - Fix superfluous CROSS_COMPILE when building Debian packages - Fix RPM package build error when KCONFIG_CONFIG is set - Use 'git archive' for creating source tarballs - Remove the scripts/list-gitignored tool * tag 'kbuild-fixes-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: use git-archive for source package creation kbuild: rpm-pkg: move source components to rpmbuild/SOURCES kbuild: deb-pkg: use dh_listpackages to know enabled packages kbuild: deb-pkg: split image and debug objects staging out into functions kbuild: deb-pkg: set CROSS_COMPILE only when undefined kbuild: deb-pkg: do not take KERNELRELEASE from the source version kbuild: deb-pkg: make debian source package working again Makefile: Make kernelrelease target work with M= kconfig: Update config changed flag before calling callback kallsyms: add kallsyms_seqs_of_names to list of special symbols
-
Linus Torvalds authored
Merge tag 'hwmon-for-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - ltc2992, adm1266: Set missing can_sleep flag - tmp512/tmp513: Drop of_match_ptr for ID table to fix build with !CONFIG_OF - ucd90320: Fix back-to-back access problem - ina3221: Fix bad error return from probe function - xgene: Fix use-after-free bug in remove function - adt7475: Fix hysteresis register bit masks, and fix association of 'smoothing' attributes * tag 'hwmon-for-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (ltc2992) Set `can_sleep` flag for GPIO chip hwmon: (adm1266) Set `can_sleep` flag for GPIO chip hwmon: tmp512: drop of_match_ptr for ID table hwmon: (ucd90320) Add minimum delay between bus accesses hwmon: (ina3221) return prober error code hwmon: (xgene) Fix use after free bug in xgene_hwmon_remove due to race condition hwmon: (adt7475) Fix masking of hysteresis registers hwmon: (adt7475) Display smoothing attributes in correct order
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libataLinus Torvalds authored
Pull ata fixes from Damien Le Moal: - Two fixes from Ondrej for the pata_parport driver to address an issue with error handling during drive connection and to fix memory leaks in case of errors during initialization and when disconnecting a device. * tag 'ata-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: pata_parport: fix memory leaks ata: pata_parport: fix parport release without claim
-
Linus Torvalds authored
The __find_restype() function loops over the m5mols_default_ffmt[] array, and the termination condition ends up being wrong: instead of stopping when the iterator becomes the size of the array it traverses, it stops after it has already overshot the array. Now, in practice this doesn't likely matter, because the code will always find the entry it looks for, and will thus return early and never hit that last extra iteration. But it turns out that clang will unroll the loop fully, because it has only two iterations (well, three due to the off-by-one bug), and then clang will end up just giving up in the middle of the loop unrolling when it notices that the code walks past the end of the array. And that made 'objtool' very unhappy indeed, because the generated code just falls off the edge of the universe, and ends up falling through to the next function, causing this warning: drivers/media/i2c/m5mols/m5mols.o: warning: objtool: m5mols_set_fmt() falls through to next function m5mols_get_frame_desc() Fix the loop ending condition. Reported-by:
Jens Axboe <axboe@kernel.dk> Analyzed-by:
Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Analyzed-by:
Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/linux-block/CAHk-=wgTSdKYbmB1JYM5vmHMcD9J9UZr0mn7BOYM_LudrP+Xvw@mail.gmail.com/ Fixes: bc125106 ("[media] Add support for M-5MOLS 8 Mega Pixel camera ISP") Cc: HeungJun, Kim <riverful.kim@samsung.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Theodore Ts'o authored
Fixes: 0813299c ("ext4: Fix possible corruption when moving a directory") Link: https://lore.kernel.org/r/5efbe1b9-ad8b-4a4f-b422-24824d2b775c@kili.mountainReported-by:
Dan Carpenter <error27@gmail.com> Reported-by: syzbot+0c73d1d8b952c5f3d714@syzkaller.appspotmail.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
