- 15 Sep, 2021 7 commits
-
-
Charles Keepax authored
cs35l41 is often connected over I2C which is a very slow bus, as such timings can be greatly improved combining writes where acceptable. Update several points where the driver does multiple register writes when a single one would suffice. Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210914141349.30218-3-ckeepax@opensource.cirrus.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Charles Keepax authored
Just clean up the code a little by using the helper rather than open coding waiting for OTP_BOOT_DONE. Signed-off-by:
-
Charles Keepax authored
The loop checking PDN_DONE doesn't check the return value from regmap_read, nor does it initialise val. This means if regmap_read fails val will be checked for the PDN_DONE bit whilst being uninitialised. Fix this up by switching to regmap_read_poll_timeout which tidies up the code and avoids the uninitialised variable. Signed-off-by:
-
Trevor Wu authored
mt6359-sound is a MFD driver. Because its regmap is retrieved from its parent, it shouldn't be freed in mt6359-sound driver. snd_soc_component_exit_regmap() will do regmap_exit(), this results in unexpected results if sound card unregister flow is invoked when users try to bind/unbind audio codec. Remove the usage of snd_soc_component_exit_regmap(). Instead, set component->regmap = NULL in the component remove function. Signed-off-by:
Trevor Wu <trevor.wu@mediatek.com> Link: https://lore.kernel.org/r/20210915034659.25044-1-trevor.wu@mediatek.comSigned-off-by:
-
Peter Ujfalusi authored
Since the load_firmware callback in snd_sof_dsp_ops is mandatory and it is tested during probe. Move the snd_sof_load_firmware() wrapper to ops.h as inline and drop the check of sof_ops(sdev)->load_firmware Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20210914125356.19828-1-peter.ujfalusi@linux.intel.comSigned-off-by:
-
Colin Ian King authored
Don't populate the array adda_dai_list on the stack but instead it static const. Also makes the object code smaller by 33 bytes: Before: text data bss dec hex filename 28271 11640 0 39911 9be7 mt8195/mt8195-dai-adda.o After: text data bss dec hex filename 28142 11736 0 39878 9bc6 mt8195/mt8195-dai-adda.o (gcc version 11.2.0) Signed-off-by:
Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210915105027.10805-1-colin.king@canonical.comSigned-off-by:
-
Bixuan Cui authored
The platform_node is returned by of_parse_phandle() should have of_node_put() before return. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Bixuan Cui <cuibixuan@huawei.com> Link: https://lore.kernel.org/r/20210911081246.33867-1-cuibixuan@huawei.comSigned-off-by:
-
- 13 Sep, 2021 33 commits
-
-
Mark Brown authored
These patches fixup or update for rockchip pdm. Changes in v4: - Acked by Rob Herring Changes in v3: - Fix property 'path-map' suggested by Rob Herring. Changes in v2: - Fix yamllint errors. Sugar Zhang (7): ASoC: rockchip: Add support for rv1126 pdm ASoC: dt-bindings: rockchip: Add binding for rv1126 pdm ASoC: rockchip: pdm: Add support for rk3568 pdm ASoC: dt-bindings: rockchip: Add binding for rk3568 pdm ASoC: rockchip: pdm: Add support for path map ASoC: dt-bindings: rockchip: pdm: Document property 'rockchip,path-map' ASoC: dt-bindings: rockchip: Convert pdm bindings to yaml .../devicetree/bindings/sound/rockchip,pdm.txt | 46 -------- .../devicetree/bindings/sound/rockchip,pdm.yaml | 120 +++++++++++++++++++++ sound/soc/rockchip/rockchip_pdm.c | 112 +++++++++++++++++-- sound/soc/rockchip/rockchip_pdm.h | 6 ++ 4 files changed, 232 insertions(+), 52 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/rockchip,pdm.txt create mode 100644 Documentation/devicetree/bindings/sound/rockchip,pdm.yaml -- 2.7.4 -
Mark Brown authored
ASoC driver and devicetree documentation for a new Cirrus Logic amplifier CS35L41 v7 changes: Remove property 'classh-bst-max-limit' David Rhodes (2): ASoC: cs35l41: CS35L41 Boosted Smart Amplifier ASoC: cs35l41: Add bindings for CS35L41 .../devicetree/bindings/sound/cs35l41.yaml | 151 ++ include/sound/cs35l41.h | 34 + sound/soc/codecs/Kconfig | 12 + sound/soc/codecs/Makefile | 4 + sound/soc/codecs/cs35l41-i2c.c | 114 ++ sound/soc/codecs/cs35l41-spi.c | 143 ++ sound/soc/codecs/cs35l41-tables.c | 597 +++++++ sound/soc/codecs/cs35l41.c | 1545 +++++++++++++++++ sound/soc/codecs/cs35l41.h | 775 +++++++++ 9 files changed, 3375 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/cs35l41.yaml create mode 100644 include/sound/cs35l41.h create mode 100644 sound/soc/codecs/cs35l41-i2c.c create mode 100644 sound/soc/codecs/cs35l41-spi.c create mode 100644 sound/soc/codecs/cs35l41-tables.c create mode 100644 sound/soc/codecs/cs35l41.c create mode 100644 sound/soc/codecs/cs35l41.h -- 2.25.1
-
Mark Brown authored
Hi, Here's another round of schema warnings fixes for the Allwinner platform. There's a fair share of new schemas in there since the schema tools now warn when a compatible is not documented in a schema. We don't have any warning anymore if we use the OPP binding Rob submitted, and since that means we have all our devices properly validated I don't expect more fixes now, aside from the usual bunch of regressions. Let me know what you think, Maxime Maxime Ripard (52): ASoC: dt-bindings: Add WM8978 Binding ASoC: dt-bindings: Convert Bluetooth SCO Link binding to a schema ASoC: dt-bindings: Convert SPDIF Transmitter binding to a schema ASoC: dt-bindings: Convert Simple Amplifier binding to a schema dt-bindings: Convert Reserved Memory binding to a schema dt-bindings: arm: Convert ARM CCI-400 binding to a schema dt-bindings: bluetooth: broadcom: Fix clocks check dt-bindings: bluetooth: realtek: Add missing max-speed dt-bindings: clocks: Fix typo in the H6 compatible dt-bindings: display: Move idk-1110wr to panel-lvds dt-bindings: display: Move idk-2121wr to panel-lvds dt-bindings: display: Move ee101ia-01d to panel-lvds dt-bindings: display: aa104xd12: Remove unused vcc-supply dt-bindings: display: aa104xd12: Fix data-mapping dt-bindings: display: Move aa104xd12 to panel-lvds dt-bindings: display: aa121td01: Remove unused vcc-supply dt-bindings: display: aa121td01: Fix data-mapping dt-bindings: display: Move aa121td01 to panel-lvds dt-bindings: display: Move gktw70sdae4se to panel-lvds dt-bindings: display: panel-lvds: Document missing panel compatibles dt-bindings: gnss: Convert UBlox Neo-6M binding to a schema dt-bindings: gpio: Convert X-Powers AXP209 GPIO binding to a schema dt-bindings: hwmon: Add IIO HWMON binding dt-bindings: input: Convert Silead GSL1680 binding to a schema dt-bindings: interconnect: sunxi: Add R40 MBUS compatible dt-bindings: media: ti,cal: Fix example dt-bindings: media: Convert OV5640 binding to a schema dt-bindings: mfd: Convert X-Powers AC100 binding to a schema dt-bindings: mfd: Convert X-Powers AXP binding to a schema dt-bindings: mmc: Convert MMC Card binding to a schema dt-bindings: net: dwmac: Fix typo in the R40 compatible dt-bindings: net: wireless: Convert ESP ESP8089 binding to a schema dt-bindings: regulator: Convert SY8106A binding to a schema dt-bindings: sunxi: Add CPU Configuration Controller Binding dt-bindings: sunxi: Add Allwinner A80 PRCM Binding dt-bindings: usb: Convert SMSC USB3503 binding to a schema dt-bindings: usb: dwc3: Fix usb-phy check dt-bindings: w1: Convert 1-Wire GPIO binding to a schema ARM: dts: sunxi: Rename power-supply names ARM: dts: sunxi: Rename gpio pinctrl names ARM: dts: sunxi: Fix OPP arrays ARM: dts: sunxi: Fix OPPs node name ARM: dts: sunxi: Fix the SPI NOR node names ARM: dts: v3s: Remove useless DMA properties ARM: dts: tbs711: Fix touchscreen compatible ARM: dts: cubieboard4: Remove the dumb-vga-dac compatible arm64: dts: allwinner: h5: Fix GPU thermal zone node name arm64: dts: allwinner: h6: Fix de3 parent clocks ordering arm64: dts: allwinner: a100: Fix thermal zone node name arm64: dts: allwinner: pinetab: Change regulator node name to avoid warning arm64: dts: allwinner: teres-i: Add missing reg arm64: dts: allwinner: teres-i: Remove wakekup-source from the PMIC .../devicetree/bindings/arm/arm,cci-400.yaml | 216 ++++++++++ .../bindings/arm/cci-control-port.yaml | 38 ++ Documentation/devicetree/bindings/arm/cci.txt | 224 ---------- .../devicetree/bindings/arm/cpus.yaml | 2 + .../arm/sunxi/allwinner,sun4i-a10-mbus.yaml | 1 + .../sunxi/allwinner,sun6i-a31-cpuconfig.yaml | 38 ++ .../arm/sunxi/allwinner,sun9i-a80-prcm.yaml | 33 ++ .../clock/allwinner,sun8i-a83t-de2-clk.yaml | 2 +- .../display/panel/advantech,idk-1110wr.yaml | 69 --- .../display/panel/advantech,idk-2121wr.yaml | 121 ------ .../display/panel/innolux,ee101ia-01d.yaml | 31 -- .../bindings/display/panel/lvds.yaml | 130 +++++- .../display/panel/mitsubishi,aa104xd12.yaml | 75 ---- .../display/panel/mitsubishi,aa121td01.yaml | 74 ---- .../display/panel/sgd,gktw70sdae4se.yaml | 68 --- .../bindings/gnss/u-blox,neo-6m.yaml | 62 +++ .../devicetree/bindings/gnss/u-blox.txt | 45 -- .../devicetree/bindings/gpio/gpio-axp209.txt | 75 ---- .../bindings/gpio/x-powers,axp209-gpio.yaml | 55 +++ .../devicetree/bindings/hwmon/iio-hwmon.yaml | 37 ++ .../i2c/allwinner,sun6i-a31-p2wi.yaml | 2 +- .../input/touchscreen/silead,gsl1680.yaml | 91 ++++ .../input/touchscreen/silead_gsl1680.txt | 44 -- .../devicetree/bindings/media/i2c/ov5640.txt | 92 ---- .../bindings/media/i2c/ovti,ov5640.yaml | 154 +++++++ .../devicetree/bindings/media/ti,cal.yaml | 4 +- .../devicetree/bindings/mfd/ac100.txt | 50 --- .../devicetree/bindings/mfd/axp20x.txt | 273 ------------ .../bindings/mfd/x-powers,ac100.yaml | 116 +++++ .../bindings/mfd/x-powers,axp152.yaml | 400 ++++++++++++++++++ .../devicetree/bindings/mmc/mmc-card.txt | 30 -- .../devicetree/bindings/mmc/mmc-card.yaml | 48 +++ .../bindings/mmc/mmc-controller.yaml | 6 - .../net/allwinner,sun8i-a83t-emac.yaml | 4 +- .../bindings/net/broadcom-bluetooth.yaml | 17 +- .../bindings/net/realtek-bluetooth.yaml | 2 + .../devicetree/bindings/net/snps,dwmac.yaml | 6 +- .../bindings/net/wireless/esp,esp8089.txt | 30 -- .../bindings/net/wireless/esp,esp8089.yaml | 43 ++ .../bindings/regulator/silergy,sy8106a.yaml | 52 +++ .../bindings/regulator/sy8106a-regulator.txt | 23 - .../reserved-memory/memory-region.yaml | 40 ++ .../reserved-memory/reserved-memory.txt | 172 +------- .../reserved-memory/reserved-memory.yaml | 96 +++++ .../reserved-memory/shared-dma-pool.yaml | 87 ++++ .../devicetree/bindings/sound/bt-sco.txt | 13 - .../bindings/sound/linux,bt-sco.yaml | 38 ++ .../bindings/sound/linux,spdif-dit.yaml | 32 ++ .../bindings/sound/simple-amplifier.txt | 17 - .../sound/simple-audio-amplifier.yaml | 45 ++ .../bindings/sound/spdif-transmitter.txt | 10 - .../devicetree/bindings/sound/wlf,wm8978.yaml | 58 +++ .../devicetree/bindings/usb/smsc,usb3503.yaml | 108 +++++ .../devicetree/bindings/usb/snps,dwc3.yaml | 10 +- .../devicetree/bindings/usb/usb3503.txt | 39 -- .../devicetree/bindings/w1/w1-gpio.txt | 27 -- .../devicetree/bindings/w1/w1-gpio.yaml | 44 ++ arch/arm/boot/dts/axp209.dtsi | 6 +- arch/arm/boot/dts/axp22x.dtsi | 6 +- arch/arm/boot/dts/axp81x.dtsi | 10 +- .../arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 11 +- arch/arm/boot/dts/sun4i-a10.dtsi | 11 +- arch/arm/boot/dts/sun5i-a13.dtsi | 15 +- arch/arm/boot/dts/sun6i-a31.dtsi | 44 +- arch/arm/boot/dts/sun7i-a20-bananapi.dts | 17 +- arch/arm/boot/dts/sun7i-a20.dtsi | 34 +- arch/arm/boot/dts/sun8i-a33.dtsi | 4 +- arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 2 +- arch/arm/boot/dts/sun8i-a83t.dtsi | 4 +- arch/arm/boot/dts/sun8i-h3.dtsi | 4 +- arch/arm/boot/dts/sun8i-v3-sl631.dtsi | 2 +- arch/arm/boot/dts/sun8i-v3s.dtsi | 2 - arch/arm/boot/dts/sun9i-a80-cubieboard4.dts | 2 +- .../boot/dts/sunxi-libretech-all-h3-it.dtsi | 2 +- arch/arm64/boot/dts/allwinner/axp803.dtsi | 10 +- .../arm64/boot/dts/allwinner/sun50i-a100.dtsi | 6 +- .../dts/allwinner/sun50i-a64-cpu-opp.dtsi | 2 +- .../dts/allwinner/sun50i-a64-orangepi-win.dts | 2 +- .../boot/dts/allwinner/sun50i-a64-pinetab.dts | 2 +- .../boot/dts/allwinner/sun50i-a64-teres-i.dts | 3 +- .../boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi | 2 +- arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 2 +- .../boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi | 2 +- arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 8 +- 84 files changed, 2191 insertions(+), 1743 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/arm,cci-400.yaml create mode 100644 Documentation/devicetree/bindings/arm/cci-control-port.yaml delete mode 100644 Documentation/devicetree/bindings/arm/cci.txt create mode 100644 Documentation/devicetree/bindings/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml create mode 100644 Documentation/devicetree/bindings/arm/sunxi/allwinner,sun9i-a80-prcm.yaml delete mode 100644 Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml delete mode 100644 Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml delete mode 100644 Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml delete mode 100644 Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml delete mode 100644 Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml delete mode 100644 Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml create mode 100644 Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml delete mode 100644 Documentation/devicetree/bindings/gnss/u-blox.txt delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-axp209.txt create mode 100644 Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml create mode 100644 Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml create mode 100644 Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt delete mode 100644 Documentation/devicetree/bindings/media/i2c/ov5640.txt create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml delete mode 100644 Documentation/devicetree/bindings/mfd/ac100.txt delete mode 100644 Documentation/devicetree/bindings/mfd/axp20x.txt create mode 100644 Documentation/devicetree/bindings/mfd/x-powers,ac100.yaml create mode 100644 Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml delete mode 100644 Documentation/devicetree/bindings/mmc/mmc-card.txt create mode 100644 Documentation/devicetree/bindings/mmc/mmc-card.yaml delete mode 100644 Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt create mode 100644 Documentation/devicetree/bindings/net/wireless/esp,esp8089.yaml create mode 100644 Documentation/devicetree/bindings/regulator/silergy,sy8106a.yaml delete mode 100644 Documentation/devicetree/bindings/regulator/sy8106a-regulator.txt create mode 100644 Documentation/devicetree/bindings/reserved-memory/memory-region.yaml create mode 100644 Documentation/devicetree/bindings/reserved-memory/reserved-memory.yaml create mode 100644 Documentation/devicetree/bindings/reserved-memory/shared-dma-pool.yaml delete mode 100644 Documentation/devicetree/bindings/sound/bt-sco.txt create mode 100644 Documentation/devicetree/bindings/sound/linux,bt-sco.yaml create mode 100644 Documentation/devicetree/bindings/sound/linux,spdif-dit.yaml delete mode 100644 Documentation/devicetree/bindings/sound/simple-amplifier.txt create mode 100644 Documentation/devicetree/bindings/sound/simple-audio-amplifier.yaml delete mode 100644 Documentation/devicetree/bindings/sound/spdif-transmitter.txt create mode 100644 Documentation/devicetree/bindings/sound/wlf,wm8978.yaml create mode 100644 Documentation/devicetree/bindings/usb/smsc,usb3503.yaml delete mode 100644 Documentation/devicetree/bindings/usb/usb3503.txt delete mode 100644 Documentation/devicetree/bindings/w1/w1-gpio.txt create mode 100644 Documentation/devicetree/bindings/w1/w1-gpio.yaml -- 2.31.1 -
Mark Brown authored
Following are the changes: - Add json-schema for 'sound-name-prefix' documentation under 'name-perfix.yaml' - Use schema references wherever needed. - Remove txt based doc Changelog ========= v2 -> v3 -------- * Removed examples in patch 1/3 as suggested by Rob * Added reviewed tag from Jerome for the series * Added reviewed tag from Rob for patch 2/3 v1 -> v2 -------- * Provide top reference to name-prefix.yaml as suggested by Rob for patch 2/3 * Dropped couple of unreachable email ids from Cc list in commit message of patch 2/3 * No changes in remaining patches Sameer Pujar (3): ASoC: Add json-schema documentation for sound-name-prefix ASoC: Use schema reference for sound-name-prefix ASoC: Remove name-prefix.txt .../devicetree/bindings/sound/name-prefix.txt | 24 ---------------------- .../devicetree/bindings/sound/name-prefix.yaml | 21 +++++++++++++++++++ .../bindings/sound/nvidia,tegra186-dspk.yaml | 9 +++----- .../bindings/sound/nvidia,tegra210-dmic.yaml | 9 +++----- .../bindings/sound/nvidia,tegra210-i2s.yaml | 9 +++----- .../devicetree/bindings/sound/nxp,tfa989x.yaml | 9 +++----- Documentation/devicetree/bindings/sound/rt5659.txt | 2 +- .../bindings/sound/simple-audio-mux.yaml | 9 +++----- 8 files changed, 37 insertions(+), 55 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/name-prefix.txt create mode 100644 Documentation/devicetree/bindings/sound/name-prefix.yaml -- 2.7.4 -
gearhead authored
the pcm5102a is capable of 384k, but the current code limits it to 192k. This commit extends to 384k Signed-off-by:
gearhead <ys3al35l@gmail.com> Link: https://lore.kernel.org/r/20210907210130.116769-1-ys3al35l@gmail.comSigned-off-by:
-
Jack Yu authored
Add i2s reference control for rt1011 amp. Signed-off-by:
Jack Yu <jack.yu@realtek.com> Link: https://lore.kernel.org/r/20210906101208.11585-1-jack.yu@realtek.comSigned-off-by:
-
Peter Ujfalusi authored
If the value/data associated with a control changes in SOF it will send a notification (SOF_IPC_GLB_COMP_MSG with SOF_IPC_COMP_GET_VALUE/DATA). We have support for binary volatile control type, but we might have features where enum/switch/volume changes. Re-implementing everything as volatile as well would be not much of a gain for several reasons: - volatile controls would do an IPC all the time, regardless if there is a need or not. - We still don't have notification which forces userspace to continuously poll. When such notification arrives we use snd_ctl_notify_one() to signal userspace about the change. The kernel is prepared for two types of notification: - the notification carries the new data for the control (num_elems != 0) The new value/data is copied to the control's local data - blank message about a change The new flag for the scontrol (comp_data_dirty) is set and when next time user space reads the value via the kcontrol's get callback we will refresh the control's local data from the firmware. Signed-off-by:
Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com> Link: https://lore.kernel.org/r/20210903114018.2962-1-peter.ujfalusi@linux.intel.comSigned-off-by:
-
Trevor Wu authored
The unnecessary conditional inclusion caused the following warning. >> sound/soc/mediatek/mt8195/mt8195-afe-pcm.c:3260:32: warning: unused >> variable 'mt8195_afe_pm_ops' [-Wunused-const-variable] static const struct dev_pm_ops mt8195_afe_pm_ops = { ^ 1 warning generated. Because runtime_pm already handles the case without CONFIG_PM, we can remove CONFIG_PM condition. Fixes: 6746cc85 ("ASoC: mediatek: mt8195: add platform driver") Signed-off-by:kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20210902071440.6087-1-trevor.wu@mediatek.comSigned-off-by:
-
Rander Wang authored
SOF_CTRL_TYPE_VALUE_CHAN_SET should be used for put operations for consistency. The current use of _GET is obviously incorrect but _GET and _SET result in the same action so there is no functional change introduced by this patch. Signed-off-by:
Rander Wang <rander.wang@intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
-
Shengjiu Wang authored
Each platform has different supported rates and formats, so add soc specific data for each platform. This soc specific data is attached with compatible string. Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by:
Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/1630044038-19036-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Guenter Roeck authored
The following build error is seen with CONFIG_PM=n. drivers/spi/spi-tegra20-slink.c:1188:12: error: 'tegra_slink_runtime_suspend' defined but not used drivers/spi/spi-tegra20-slink.c:1200:12: error: 'tegra_slink_runtime_resume' defined but not used Declare the functions only if PM is enabled. While at it, remove the unnecessary forward declarations. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210907045358.2138282-1-linux@roeck-us.netSigned-off-by:
-
Srinivasa Rao Mandadapu authored
Add header defining for lpass internal digital codecs rx,tx and va dai node id's. Signed-off-by:
Srinivasa Rao Mandadapu <srivasam@codeaurora.org> Link: https://lore.kernel.org/r/1630934854-14086-1-git-send-email-srivasam@codeaurora.orgSigned-off-by:
-
Derek Fang authored
Realtek ALC5682I-VS codec is a ALC5682I-VD variant which supports I2C only. Signed-off-by:
Derek Fang <derek.fang@realtek.com> Link: https://lore.kernel.org/r/20210831130258.19286-2-derek.fang@realtek.comSigned-off-by:
-
Derek Fang authored
This is an initial codec driver for Realtek ALC5682I-VS codec. Signed-off-by:
-
Colin Ian King authored
The pointer etdm_data is being inintialized with a value that is never read, it is later being re-assigned a new value. Remove the redundant initialization. Addresses-Coverity: ("Unused value") Signed-off-by: -
Masahiro Yamada authored
Kconfig generates include/generated/autoconf.h to make CONFIG options available to the pre-processor. Symbols with the value 'm' are suffixed with '_MODULE' Here is a conflict; CONFIG_FOO=m results in '#define CONFIG_FOO_MODULE 1', but CONFIG_FOO_MODULE=y also results in the same define. Also, CONFIG options that end with '_MODULE' confuse the Kconfig/fixdep interaction; fixdep always assumes CONFIG_FOO_MODULE comes from CONFIG_FOO=m, so the dependency is not properly tracked for symbols that end with '_MODULE'. For these reasons, CONFIG options that end with '_MODULE' should be avoided in general. (I am planning on adding a check in Kconfig.) This is the only case in the current kernel. The new option name was suggested by Péter Ujfalusi. [1] [1] https://lore.kernel.org/all/d9e777dc-d274-92ee-4d77-711bfd553611@gmail.com/ Fixes: 147162f5 ("ASoC: ti: fix SND_SOC_DM365_VOICE_CODEC dependencies") Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Acked-by:
Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20210901164009.1546967-1-masahiroy@kernel.orgSigned-off-by:
-
Pierre-Louis Bossart authored
Most distributions do not enable the SOF developer options and specifically the DMA trace. This is problematic for end-user/community support since the sof-logger tool cannot extract valuable information. Conversely in rare cases the DMA trace can lead to Heisenbugs by creating more traffic to system memory and more interrupts. This patch changes the logic so that the Kconfig value is used as a default value for a module parameter, but this value can be changed as needed. Users can override the distro DMA trace selection. Signed-off-by:
Daniel Baluta <daniel.baluta@gmail.com> Reviewed-by:
-
Cai Huoqing authored
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by:
Cai Huoqing <caihuoqing@baidu.com> Link: https://lore.kernel.org/r/20210901132742.31714-1-caihuoqing@baidu.comSigned-off-by:
-
Peter Ujfalusi authored
A DAPM widget now can have different types of controls, it is no longer correct to print the type as it is just the type of the first control. Move it after the loop where we create the controls and print the number of the control types. Signed-off-by:
-
Pierre-Louis Bossart authored
Sparse reports the following warning: sound/soc/amd/acp-pcm-dma.c:39:6: error: symbol 'bt_uart_enable' was not declared. Should it be static? It's not very good practice to export such symbols that can easily conflict, add the acp_ prefix and add declaration in header file. Signed-off-by:
-
Sebastian Andrzej Siewior authored
irqs_lock is not used, never was. Remove irqs_lock. Fixes: 283b6124 ("ASoC: mediatek: implement mediatek common structure") Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/r/20210910094847.3430413-1-bigeasy@linutronix.deSigned-off-by:
-
Maxime Ripard authored
Simple audio amplifiers are supported by Linux with a matching device tree binding. Now that we have the DT validation in place, let's convert the device tree bindings for that driver over to a YAML schema. Cc: alsa-devel@alsa-project.org Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210901091852.479202-5-maxime@cerno.techSigned-off-by:
-
Maxime Ripard authored
The SPDIF Transmitter binding is used by Linux with a matching Device Tree binding. Now that we have the DT validation in place, let's convert the device tree bindings for that driver over to a YAML schema. Cc: alsa-devel@alsa-project.org Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Reviewed-by:
-
Maxime Ripard authored
Bluetooth SCO Link are supported by Linux with a matching device tree binding. Now that we have the DT validation in place, let's convert the device tree bindings for that driver over to a YAML schema. Cc: alsa-devel@alsa-project.org Cc: devicetree@vger.kernel.org Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Samuel Holland <samuel@sholland.org> Signed-off-by:
-
Maxime Ripard authored
Even though we had the wm8978 driver for some time and a number of boards using it already, we never had a binding for it. Let's add it based on what the driver expects and the boards are providing. Cc: alsa-devel@alsa-project.org Cc: devicetree@vger.kernel.org Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: patches@opensource.cirrus.com Reviewed-by:
-
Sameer Pujar authored
Since schema name-prefix.yaml is available and references are updated, remove txt based doc. Signed-off-by:
Sameer Pujar <spujar@nvidia.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Rob Herring <robh+dt@kernel.org> Reviewed-by:
Jerome Brunet <jbrunet@baylibre.com> Acked-by:
-
Sameer Pujar authored
Use schema reference for 'sound-name-prefix' property wherever necessary. Signed-off-by:
-
Sameer Pujar authored
The 'sound-name-prefix' is used to prepend suitable strings to a component widgets or controls. This is helpful when there are multiple instances of the same component. Add relevant json-schema and is inspired from sound-name-prefix.txt documentation. Signed-off-by:
-
David Rhodes authored
Devicetree binding documentation for CS35L41 driver CS35L41 is a 11-V Boosted Mono Class D Amplifier with DSP Speaker Protection and Equalization Signed-off-by:
David Rhodes <drhodes@opensource.cirrus.com> Reviewed-by:
-
David Rhodes authored
SoC Audio driver for the Cirrus Logic CS35L41 amplifier Signed-off-by:
-
Sugar Zhang authored
This patch converts pdm bindings to yaml. Signed-off-by:
Sugar Zhang <sugar.zhang@rock-chips.com> Reviewed-by:
-
Sugar Zhang authored
This is an optional property to describe data path mapping. Signed-off-by:
-
Sugar Zhang authored
This patch adds property 'rockchip,path-map' for path mapping. e.g. "rockchip,path-map = <3 2 1 0>" means the mapping as follows: path0 <-- sdi3 path1 <-- sdi2 path2 <-- sdi1 path3 <-- sdi0 Signed-off-by:
-
