- 09 Oct, 2023 3 commits
-
-
Rob Herring authored
Use preferred i2c_get_match_data() instead of of_match_device() and i2c_match_id() to get the driver match data. With this, adjust the includes to explicitly include the correct headers. Avoid using 0 for enum da7218_dev_id so that no match data can be distinguished. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20231006-dt-asoc-header-cleanups-v3-3-13a4f0f7fee6@kernel.orgSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Rob Herring authored
If probe is reached, we've already matched the device and in the case of DT matching, the struct device_node pointer will be set. Therefore, there is no need to call of_match_device() in probe. Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by:
-
Rob Herring authored
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it was merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Acked-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by:
-
- 06 Oct, 2023 9 commits
-
-
Mark Brown authored
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>: Add pipeline priority support for IPC4: Add support for parsing pipeline priorities from the topology. This will be used to break the tie between pipelines to set the trigger order when multiple pipelines are triggered simultaneously.
-
Mark Brown authored
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>: Update the hibernate and wake command sequences to meet the latest datasheet specification and enable hibernation for I2C and SPI control interfaces. Richard Fitzgerald (1): ASoC: cs35l56: Enable low-power hibernation mode on SPI Simon Trimmer (3): ASoC: cs35l56: Change hibernate sequence to use allow auto hibernate ASoC: cs35l56: Wake transactions need to be issued twice ASoC: cs35l56: Enable low-power hibernation mode on i2c include/sound/cs35l56.h | 1 + sound/soc/codecs/cs35l56-i2c.c | 1 + sound/soc/codecs/cs35l56-shared.c | 66 +++++++++++++++++++------------ sound/soc/codecs/cs35l56-spi.c | 1 + 4 files changed, 43 insertions(+), 26 deletions(-) -- 2.30.2
-
Kees Cook authored
Add missing sof header files for ASoC. Suggested-by:
Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20231005025618.work.355-kees@kernel.orgSigned-off-by:
-
Richard Fitzgerald authored
Hibernation can be enabled on SPI-connected devices now that the hibernate and wake sequences have been updated to work with wake-on-MOSI. Signed-off-by:
Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231006111039.101914-5-rf@opensource.cirrus.comSigned-off-by:
-
Simon Trimmer authored
This can now be re-enabled as the sequence to reliably wake the device has been implemented in the shared code. Signed-off-by:
Simon Trimmer <simont@opensource.cirrus.com> Signed-off-by:
-
Simon Trimmer authored
As the dummy wake is a toggling signal (either I2C or SPI activity) it is not guaranteed to meet the minimum asserted hold time for a wake signal. In this case the wake must guarantee rising edges separated by at least the minimum hold time. Signed-off-by:
-
Simon Trimmer authored
If the hardware uses SPI_MOSI, I2C_SCL or I2C_SDA as the wake source the bus activity of sending HIBERNATE_NOW will wake up the amps that were already put into hibernate. ALLOW_AUTO_HIBERNATE tells the firmware to hibernate itself after a timeout of a few seconds, giving the driver instances time to send this before any amps have gone into hibernate. Signed-off-by:
-
Rander Wang authored
The pipeline priority is set in topology and driver should sort pipeline based on priority for trigger order. Reviewed-by:
Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by:
Rander Wang <rander.wang@intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
Rander Wang authored
Driver set pipeline priority according to priority setting in topology. Reviewed-by:
-
- 04 Oct, 2023 3 commits
-
-
Kees Cook authored
Make sure a few other paths are correctly sent to the ASoC maintainers. Link: https://lore.kernel.org/lkml/63dd3676.170a0220.1f1b2.3244@mx.google.com/ Cc: Mark Brown <broonie@kernel.org> Signed-off-by:
-
Simon Trimmer authored
read_poll_timeout() is a macro and val will be populated before use, however some static analysis tools treat it as a function and warn of uninitialised variable usage. Signed-off-by:
-
Kees Cook authored
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct snd_soc_dapm_widget_list. Additionally, since the element count member must be set before accessing the annotated flexible array member, move its initialization earlier. Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Cc: alsa-devel@alsa-project.org Cc: linux-hardening@vger.kernel.org Link: https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci [1] Signed-off-by:
"Gustavo A. R. Silva" <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20231003232852.work.257-kees@kernel.orgSigned-off-by:
-
- 03 Oct, 2023 3 commits
-
-
Bragatheswaran Manickavel authored
Convert the rt5616 audio CODEC bindings to DT schema Signed-off-by:
Bragatheswaran Manickavel <bragathemanick0908@gmail.com> Reviewed-by:
-
Simon Trimmer authored
The two CS35L56_HIBERNATE_WAKE_* constants in cs35l56.h aren't used by any of the driver code. Signed-off-by:
-
Mark Brown authored
Merge series from Luca Weiss <luca.weiss@fairphone.com>: The AW88261 chip doesn't have a reset gpio, so remove it from the bindings and from the driver.
-
- 02 Oct, 2023 13 commits
-
-
Joerg Schambacher authored
The TAS5754/6 power amplifiers use the same pcm512x driver with only minor restictions described in the bindings document. Signed-off-by:
Joerg Schambacher <joerg.hifiberry@gmail.com> Reviewed-by:
-
Joerg Schambacher authored
Enables the existing pcm512x driver to control the almost compatible TAS5754 and -76 amplifers. Both amplifiers support only an I2C interface and the internal PLL must be always on to provide necessary clocks to the amplifier section. Tested on TAS5756 with support from Andreas Arbesser-Krasser from Texas Instruments <a-krasser@ti.com> Signed-off-by:
-
Luca Weiss authored
According to the AW88261 datasheet (V1.1) and device schematics I have access to, there is no reset gpio present on the AW88261. Remove it. Signed-off-by:
Luca Weiss <luca.weiss@fairphone.com> Link: https://lore.kernel.org/r/20231002-aw88261-reset-v2-2-837cb1e7b95c@fairphone.comSigned-off-by:
-
Luca Weiss authored
The AW88261 chip doesn't have a reset GPIO, so disallow providing reset-gpios. At the same time also don't keep reset-gpios required for AW88395. This is both because the Linux driver has it optional, and it also simplifies the bindings by not introducing another conditional. Signed-off-by:
-
Mark Brown authored
Merge series from Linus Walleij <linus.walleij@linaro.org>: This cleans up and rewrites the GPIO usage in the TI ASoC components to use GPIO descriptors exclusively. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> --- Linus Walleij (5): ASoC: ti: Convert N810 ASoC to GPIO descriptors ASoC: ti: Convert RX51 to use exclusively GPIO descriptors ASoC: ti: Convert TWL4030 to use GPIO descriptors ASoC: ti: Convert Pandora ASoC to GPIO descriptors ASoC: ti: osk5912: Drop unused include arch/arm/mach-omap2/board-n8x0.c | 10 +++++ arch/arm/mach-omap2/pdata-quirks.c | 10 +++++ include/linux/platform_data/omap-twl4030.h | 3 -- sound/soc/ti/n810.c | 31 ++++++++------- sound/soc/ti/omap-twl4030.c | 20 ++++------ sound/soc/ti/omap3pandora.c | 63 +++++++++++------------------- sound/soc/ti/osk5912.c | 1 - sound/soc/ti/rx51.c | 19 ++------- 8 files changed, 72 insertions(+), 85 deletions(-) --- base-commit: 0bb80ecc change-id: 20230922-descriptors-asoc-ti-a852eff479ed Best regards, -- Linus Walleij <linus.walleij@linaro.org>
-
Shenghao Ding authored
fixed m68k compiling issue: mapping table can save code field; storing the dev_idx as a member of block can reduce unnecessary time and system resource comsumption of dev_idx mapping every time the block data writing to the dsp. Signed-off-by:
Shenghao Ding <shenghao-ding@ti.com> Link: https://lore.kernel.org/r/20231002090434.1896-1-shenghao-ding@ti.comSigned-off-by:
-
Amadeusz Sławiński authored
Recent commit removed the only user of bus variable in avs_dai_fe_prepare(), also remove the variable itself. Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202309292121.5DdaNpLj-lkp@intel.com/Reviewed-by:
Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by:
Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20231002084629.903103-1-amadeuszx.slawinski@linux.intel.comSigned-off-by:
-
Gustavo A. R. Silva authored
If, for any reason, the open-coded arithmetic causes a wraparound, the protection that `struct_size()` adds against potential integer overflows is defeated. Fix this by hardening call to `struct_size()` with `size_add()`. Fixes: f9efae95 ("ASoC: SOF: ipc4-topology: Add support for base config extension") Signed-off-by:
-
Linus Walleij authored
This driver includes the legacy header <linux/gpio.h> but doesn't use it. Drop the include. Signed-off-by:
Jarkko Nikula <jarkko.nikula@bitmer.com> Link: https://lore.kernel.org/r/20230926-descriptors-asoc-ti-v1-5-60cf4f8adbc5@linaro.orgSigned-off-by:
-
Linus Walleij authored
The Pandora uses GPIO descriptors pretty much exclusively, but not for ASoC, so let's fix it. Register the pins in a descriptor table in the machine since the ASoC device is not using device tree. Use static locals for the GPIO descriptors because I'm not able to experient with better state storage on any real hardware. Others using the Pandora can come afterwards and improve this. Signed-off-by:
-
Linus Walleij authored
The TWL4030 is actually only ever populated from the device tree, so we can just pass the right device and headphone jack GPIO name to snd_soc_jack_add_gpios() and it will pick the right GPIO right from the device tree. The platform data patch is unused (no in-tree users of the pdata method) but these can use GPIO descriptor tables rather than global GPIO numbers if they need this. Signed-off-by:
-
Linus Walleij authored
The N810 uses GPIO descriptors pretty much exclusively, but not for ASoC, so let's fix it. Register the pins in a descriptor table in the machine since the ASoC device is not using device tree. Use static locals for the GPIO descriptors because I'm not able to experient with better state storage on any real hardware. Others using the N810 can come afterwards and improve this. Signed-off-by:
-
Linus Walleij authored
The RX51/Nokia n900 uses the legacy GPIO header to convert a GPIO back to the global GPIO numberspace and then the jack using it in the snd_soc_jack_add_gpios() call immediately looks up the corresponding descriptor again. The snd_soc_jack_add_gpios() handles GPIOs passed with devices just fine: pass in the device instead, and rename the GPIO to match the property in the device tree, and it should work all the same but without all the trouble. Signed-off-by:
-
- 29 Sep, 2023 7 commits
-
-
Cezary Rojewski authored
HDAudio streams are decoupled on startup() and, decoupling them again on prepare() is redundant. Signed-off-by:
-
Wu Zhou authored
When audio controller is passed-through to the guest machine in virtualized environment, the basefw load will fail the next time guest OS reboots. Disable the DSP main core before loading the base firmware to sanitize the environment. Signed-off-by:
Wu Zhou <wu.zhou@intel.com> Signed-off-by:
Libin Yang <libin.yang@intel.com> Signed-off-by:
-
Cezary Rojewski authored
To prevent rmmod and similar behave unexpectedly when invoked on snd_soc_avs module while the AudioDSP firmware tracing is ongoing, increase the module refcount until the tracing is stopped. Signed-off-by:
-
Amadeusz Sławiński authored
In order to instantiate modules on the firmware side, the driver sends payload with module configuration. In some case size of this information is not known before hand, so driver allocates temporary memory during module creation and frees it after use. Optimize the flow a bit, by preallocating maximum buffer. This removes the time spend on allocating memory, as well as potential OOM errors during module initialization. Handlers for modules, where configuration data fits on stack, are left as is. Reviewed-by:
-
Amadeusz Sławiński authored
Instead of using PAGE_SIZE as base of definitions in headers, use generic size defines. While x86 platforms use 4096 as page size, there are platforms which use different page sizes. Two of changed defines are for memory windows on DSP side, which have fixed size independent of host side page size. Another one is for CLDMA buffer which also doesn't need to change with page size. Reviewed-by:
-
Cezary Rojewski authored
Code size can be reduced if avs_dsp_send_xxx_msg()s take responsibility for dumping logs in case of an IPC message failure. In consequence, avs_ipc_err() helper is removed. Signed-off-by:
-
Rob Herring authored
There's generally no need to use definitions to reference from individual properties. All the property names are the same, and all the defined properties are used by all the users. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/20230928194126.1146622-1-robh@kernel.orgSigned-off-by:
-
- 28 Sep, 2023 2 commits
-
-
Amadeusz Sławiński authored
There are examples in documentation for codec to codec connection. However they show method before recent series of patches which renamed the fields. Update documentation accordingly. Fixes: 7ddc7f91 ("ASoC: soc.h: clarify Codec2Codec params") Signed-off-by:
-
Mark Brown authored
Merge series from wangweidong.a@awinic.com: The awinic aw87390 is a new high efficiency, low noise, constant large volume, 6th Smart K audio amplifier.
-
