- 23 Jun, 2014 19 commits
-
-
Tom Gundersen authored
[ Upstream commit f98f89a0 ] Enable the module alias hookup to allow tunnel modules to be autoloaded on demand. This is in line with how most other netdev kinds work, and will allow userspace to create tunnels without having CAP_SYS_MODULE. Signed-off-by:
Tom Gundersen <teg@jklm.no> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
Toshiaki Makita authored
[ Upstream commit e0d7968a ] br_handle_local_finish() is allowing us to insert an FDB entry with disallowed vlan. For example, when port 1 and 2 are communicating in vlan 10, and even if vlan 10 is disallowed on port 3, port 3 can interfere with their communication by spoofed src mac address with vlan id 10. Note: Even if it is judged that a frame should not be learned, it should not be dropped because it is destined for not forwarding layer but higher layer. See IEEE 802.1Q-2011 8.13.10. Signed-off-by:
Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by:
Vlad Yasevich <vyasevic@redhat.com> Signed-off-by:
-
Michal Schmidt authored
[ Upstream commit bfc5184b ] Any process is able to send netlink messages with leftover bytes. Make the warning rate-limited to prevent too much log spam. The warning is supposed to help find userspace bugs, so print the triggering command name to implicate the buggy program. [v2: Use pr_warn_ratelimited instead of printk_ratelimited.] Signed-off-by:
Michal Schmidt <mschmidt@redhat.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 7df566bb ] This function is called from dcbnl_build_peer_app(). The "info" struct isn't initialized at all so we disclose 2 bytes of uninitialized stack data. We should clear it before passing it to the user. Fixes: 48365e48 ('qlcnic: dcb: Add support for CEE Netlink interface.') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Eric W. Biederman authored
[ Upstream commit 2d7a85f4 ] It was possible to get a setuid root or setcap executable to write to it's stdout or stderr (which has been set made a netlink socket) and inadvertently reconfigure the networking stack. To prevent this we check that both the creator of the socket and the currentl applications has permission to reconfigure the network stack. Unfortunately this breaks Zebra which always uses sendto/sendmsg and creates it's socket without any privileges. To keep Zebra working don't bother checking if the creator of the socket has privilege when a destination address is specified. Instead rely exclusively on the privileges of the sender of the socket. Note from Andy: This is exactly Eric's code except for some comment clarifications and formatting fixes. Neither I nor, I think, anyone else is thrilled with this approach, but I'm hesitant to wait on a better fix since 3.15 is almost here. Note to stable maintainers: This is a mess. An earlier series of patches in 3.15 fix a rather serious security issue (CVE-2014-0181), but they did so in a way that breaks Zebra. The offending series includes: commit aa4cf945 Author: Eric W. Biederman <ebiederm@xmission.com> Date: Wed Apr 23 14:28:03 2014 -0700 net: Add variants of capable for use on netlink messages If a given kernel version is missing that series of fixes, it's probably worth backporting it and this patch. if that series is present, then this fix is critical if you care about Zebra. Cc: stable@vger.kernel.org Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Signed-off-by:
-
Eric W. Biederman authored
[ Upstream commit 90f62cf3 ] It is possible by passing a netlink socket to a more privileged executable and then to fool that executable into writing to the socket data that happens to be valid netlink message to do something that privileged executable did not intend to do. To keep this from happening replace bare capable and ns_capable calls with netlink_capable, netlink_net_calls and netlink_ns_capable calls. Which act the same as the previous calls except they verify that the opener of the socket had the desired permissions as well. Reported-by:
-
Eric W. Biederman authored
[ Upstream commit aa4cf945 ] netlink_net_capable - The common case use, for operations that are safe on a network namespace netlink_capable - For operations that are only known to be safe for the global root netlink_ns_capable - The general case of capable used to handle special cases __netlink_ns_capable - Same as netlink_ns_capable except taking a netlink_skb_parms instead of the skbuff of a netlink message. Signed-off-by:
-
Eric W. Biederman authored
[ Upstream commit a3b299da ] sk_net_capable - The common case, operations that are safe in a network namespace. sk_capable - Operations that are not known to be safe in a network namespace sk_ns_capable - The general case for special cases. Signed-off-by:
-
Eric W. Biederman authored
[ Upstream commit a53b72c8 ] The permission check in sock_diag_put_filterinfo is wrong, and it is so removed from it's sources it is not clear why it is wrong. Move the computation into packet_diag_dump and pass a bool of the result into sock_diag_filterinfo. This does not yet correct the capability check but instead simply moves it to make it clear what is going on. Reported-by:
-
Eric W. Biederman authored
[ Upstream commit 5187cd05 ] netlink_capable is a static internal function in af_netlink.c and we have better uses for the name netlink_capable. Signed-off-by:
-
Mimi Zohar authored
commit 2fb1c9a4 upstream. Calculating the 'security.evm' HMAC value requires access to the EVM encrypted key. Only the kernel should have access to it. This patch prevents userspace tools(eg. setfattr, cp --preserve=xattr) from setting/modifying the 'security.evm' HMAC value directly. Signed-off-by:
Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by:
-
Dmitry Kasatkin authored
commit 0430e49b upstream. Commit 8aac6270 "move exit_task_namespaces() outside of exit_notify" introduced the kernel opps since the kernel v3.10, which happens when Apparmor and IMA-appraisal are enabled at the same time. ---------------------------------------------------------------------- [ 106.750167] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 [ 106.750221] IP: [<ffffffff811ec7da>] our_mnt+0x1a/0x30 [ 106.750241] PGD 0 [ 106.750254] Oops: 0000 [#1] SMP [ 106.750272] Modules linked in: cuse parport_pc ppdev bnep rfcomm bluetooth rpcsec_gss_krb5 nfsd auth_rpcgss nfs_acl nfs lockd sunrpc fscache dm_crypt intel_rapl x86_pkg_temp_thermal intel_powerclamp kvm_intel snd_hda_codec_hdmi kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 glue_helper lrw gf128mul ablk_helper cryptd snd_hda_codec_realtek dcdbas snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_page_alloc snd_seq_midi snd_seq_midi_event snd_rawmidi psmouse snd_seq microcode serio_raw snd_timer snd_seq_device snd soundcore video lpc_ich coretemp mac_hid lp parport mei_me mei nbd hid_generic e1000e usbhid ahci ptp hid libahci pps_core [ 106.750658] CPU: 6 PID: 1394 Comm: mysqld Not tainted 3.13.0-rc7-kds+ #15 [ 106.750673] Hardware name: Dell Inc. OptiPlex 9010/0M9KCM, BIOS A08 09/19/2012 [ 106.750689] task: ffff8800de804920 ti: ffff880400fca000 task.ti: ffff880400fca000 [ 106.750704] RIP: 0010:[<ffffffff811ec7da>] [<ffffffff811ec7da>] our_mnt+0x1a/0x30 [ 106.750725] RSP: 0018:ffff880400fcba60 EFLAGS: 00010286 [ 106.750738] RAX: 0000000000000000 RBX: 0000000000000100 RCX: ffff8800d51523e7 [ 106.750764] RDX: ffffffffffffffea RSI: ffff880400fcba34 RDI: ffff880402d20020 [ 106.750791] RBP: ffff880400fcbae0 R08: 0000000000000000 R09: 0000000000000001 [ 106.750817] R10: 0000000000000000 R11: 0000000000000001 R12: ffff8800d5152300 [ 106.750844] R13: ffff8803eb8df510 R14: ffff880400fcbb28 R15: ffff8800d51523e7 [ 106.750871] FS: 0000000000000000(0000) GS:ffff88040d200000(0000) knlGS:0000000000000000 [ 106.750910] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 106.750935] CR2: 0000000000000018 CR3: 0000000001c0e000 CR4: 00000000001407e0 [ 106.750962] Stack: [ 106.750981] ffffffff813434eb ffff880400fcbb20 ffff880400fcbb18 0000000000000000 [ 106.751037] ffff8800de804920 ffffffff8101b9b9 0001800000000000 0000000000000100 [ 106.751093] 0000010000000000 0000000000000002 000000000000000e ffff8803eb8df500 [ 106.751149] Call Trace: [ 106.751172] [<ffffffff813434eb>] ? aa_path_name+0x2ab/0x430 [ 106.751199] [<ffffffff8101b9b9>] ? sched_clock+0x9/0x10 [ 106.751225] [<ffffffff8134a68d>] aa_path_perm+0x7d/0x170 [ 106.751250] [<ffffffff8101b945>] ? native_sched_clock+0x15/0x80 [ 106.751276] [<ffffffff8134aa73>] aa_file_perm+0x33/0x40 [ 106.751301] [<ffffffff81348c5e>] common_file_perm+0x8e/0xb0 [ 106.751327] [<ffffffff81348d78>] apparmor_file_permission+0x18/0x20 [ 106.751355] [<ffffffff8130c853>] security_file_permission+0x23/0xa0 [ 106.751382] [<ffffffff811c77a2>] rw_verify_area+0x52/0xe0 [ 106.751407] [<ffffffff811c789d>] vfs_read+0x6d/0x170 [ 106.751432] [<ffffffff811cda31>] kernel_read+0x41/0x60 [ 106.751457] [<ffffffff8134fd45>] ima_calc_file_hash+0x225/0x280 [ 106.751483] [<ffffffff8134fb52>] ? ima_calc_file_hash+0x32/0x280 [ 106.751509] [<ffffffff8135022d>] ima_collect_measurement+0x9d/0x160 [ 106.751536] [<ffffffff810b552d>] ? trace_hardirqs_on+0xd/0x10 [ 106.751562] [<ffffffff8134f07c>] ? ima_file_free+0x6c/0xd0 [ 106.751587] [<ffffffff81352824>] ima_update_xattr+0x34/0x60 [ 106.751612] [<ffffffff8134f0d0>] ima_file_free+0xc0/0xd0 [ 106.751637] [<ffffffff811c9635>] __fput+0xd5/0x300 [ 106.751662] [<ffffffff811c98ae>] ____fput+0xe/0x10 [ 106.751687] [<ffffffff81086774>] task_work_run+0xc4/0xe0 [ 106.751712] [<ffffffff81066fad>] do_exit+0x2bd/0xa90 [ 106.751738] [<ffffffff8173c958>] ? retint_swapgs+0x13/0x1b [ 106.751763] [<ffffffff8106780c>] do_group_exit+0x4c/0xc0 [ 106.751788] [<ffffffff81067894>] SyS_exit_group+0x14/0x20 [ 106.751814] [<ffffffff8174522d>] system_call_fastpath+0x1a/0x1f [ 106.751839] Code: c3 0f 1f 44 00 00 55 48 89 e5 e8 22 fe ff ff 5d c3 0f 1f 44 00 00 55 65 48 8b 04 25 c0 c9 00 00 48 8b 80 28 06 00 00 48 89 e5 5d <48> 8b 40 18 48 39 87 c0 00 00 00 0f 94 c0 c3 0f 1f 80 00 00 00 [ 106.752185] RIP [<ffffffff811ec7da>] our_mnt+0x1a/0x30 [ 106.752214] RSP <ffff880400fcba60> [ 106.752236] CR2: 0000000000000018 [ 106.752258] ---[ end trace 3c520748b4732721 ]--- ---------------------------------------------------------------------- The reason for the oops is that IMA-appraisal uses "kernel_read()" when file is closed. kernel_read() honors LSM security hook which calls Apparmor handler, which uses current->nsproxy->mnt_ns. The 'guilty' commit changed the order of cleanup code so that nsproxy->mnt_ns was not already available for Apparmor. Discussion about the issue with Al Viro and Eric W. Biederman suggested that kernel_read() is too high-level for IMA. Another issue, except security checking, that was identified is mandatory locking. kernel_read honors it as well and it might prevent IMA from calculating necessary hash. It was suggested to use simplified version of the function without security and locking checks. This patch introduces special version ima_kernel_read(), which skips security and mandatory locking checking. It prevents the kernel oops to happen. Signed-off-by:
Dmitry Kasatkin <d.kasatkin@samsung.com> Suggested-by:
-
Nicholas Bellinger authored
commit 1d2b60a5 upstream. This patch adds an explicit check in chap_server_compute_md5() to ensure the CHAP_C value received from the initiator during mutual authentication does not match the original CHAP_C provided by the target. This is in line with RFC-3720, section 8.2.1: Originators MUST NOT reuse the CHAP challenge sent by the Responder for the other direction of a bidirectional authentication. Responders MUST check for this condition and close the iSCSI TCP connection if it occurs. Reported-by:
Tejas Vaykole <tejas.vaykole@calsoftinc.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Boris BREZILLON authored
commit 2fe121e1 upstream. The rtc user must wait at least 1 sec between each time/calandar update (see atmel's datasheet chapter "Updating Time/Calendar"). Use the 1Hz interrupt to update the at91_rtc_upd_rdy flag and wait for the at91_rtc_wait_upd_rdy event if the rtc is not ready. This patch fixes a deadlock in an uninterruptible wait when the RTC is updated more than once every second. AFAICT the bug is here from the beginning, but I think we should at least backport this fix to 3.10 and the following longterm and stable releases. Signed-off-by:
Boris BREZILLON <boris.brezillon@free-electrons.com> Reported-by:
Bryan Evenson <bevenson@melinkcorp.com> Tested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Michael S. Tsirkin authored
[ Upstream commit 1fd819ec ] skb_segment copies frags around, so we need to copy them carefully to avoid accessing user memory after reporting completion to userspace through a callback. skb_segment doesn't normally happen on datapath: TSO needs to be disabled - so disabling zero copy in this case does not look like a big deal. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Michael S. Tsirkin authored
[ Upstream commit 1a4cedaf ] fskb is unrelated to frag: it's coming from frag_list. Rename it list_skb to avoid confusion. Signed-off-by:
-
Michael S. Tsirkin authored
[ Upstream commit df5771ff ] rename local variable to make it easier to tell at a glance that we are dealing with a head skb. Signed-off-by:
-
Michael S. Tsirkin authored
[ Upstream commit 4e1beba1 ] skb_frag can in fact point at either skb or fskb so rename it generally "frag". Signed-off-by:
-
Michael S. Tsirkin authored
[ Upstream commit 8cb19905 ] frag points at nskb, so name it appropriately Signed-off-by:
-
- 20 Jun, 2014 21 commits
-
-
Mimi Zohar authored
commit f9b2a735 upstream. Files are measured or appraised based on the IMA policy. When a file, in policy, is opened with the O_DIRECT flag, a deadlock occurs. The first attempt at resolving this lockdep temporarily removed the O_DIRECT flag and restored it, after calculating the hash. The second attempt introduced the O_DIRECT_HAVELOCK flag. Based on this flag, do_blockdev_direct_IO() would skip taking the i_mutex a second time. The third attempt, by Dmitry Kasatkin, resolves the i_mutex locking issue, by re-introducing the IMA mutex, but uncovered another problem. Reading a file with O_DIRECT flag set, writes directly to userspace pages. A second patch allocates a user-space like memory. This works for all IMA hooks, except ima_file_free(), which is called on __fput() to recalculate the file hash. Until this last issue is addressed, do not 'collect' the measurement for measuring, appraising, or auditing files opened with the O_DIRECT flag set. Based on policy, permit or deny file access. This patch defines a new IMA policy rule option named 'permit_directio'. Policy rules could be defined, based on LSM or other criteria, to permit specific applications to open files with the O_DIRECT flag set. Changelog v1: - permit or deny file access based IMA policy rules Signed-off-by:
-
Ville Syrjälä authored
commit 40478455 upstream. In commit commit 6375b768 Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Mon Mar 3 11:33:36 2014 +0200 drm/i915: Reject >165MHz modes w/ DVI monitors the driver started to filter out display modes which exceed the single-link DVI 165Mz dotclock limits when the monitor doesn't report itself as being HDMI compliant. The intent was to filter out all EDID derived modes that require dual-link DVI to operate since we don't support dual-link. However the patch went a bit too far and also causes the driver to reject such modes even when specified by the user. Normally we don't check the sink limitations when setting a mode from the user. This allows the user to specify any mode whether the sink reports to support it or not. This can be useful since often the sinks support more modes than they report in the EDID. So relax the checks a bit, and apply the single-link DVI dotclock limit only when filtering the mode list, and ignore the limit when setting a user specified mode. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=72961Tested-by:
Nicholas Vinson <nvinson@comcast.net> Cc: stable@vger.kernel.org [3.14] Reviewed-by:
Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Andreas Schrägle authored
commit 754a292f upstream. Add support for Marvell Technology Group Ltd. 88SE91A0 SATA 6Gb/s Controller by adding its PCI ID. Signed-off-by:
Andreas Schrägle <ajs124.ajs124@gmail.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Jérôme Carretero authored
commit d2518365 upstream. This device normally comes with a proprietary driver, using a web GUI to configure RAID: http://www.highpoint-tech.com/USA_new/series_rr600-download.htm But thankfully it also works out of the box with the AHCI driver, being just a Marvell 88SE9235. Devices 640L, 644L, 644LS should also be supported but not tested here. Signed-off-by:
Jérôme Carretero <cJ-ko@zougloub.eu> Signed-off-by:
-
Alessandro Miceli authored
commit 74a86272 upstream. Added support for Sveon STV27 device (rtl2832u + FC0013 tuner) Signed-off-by:
Alessandro Miceli <angelofsky1980@gmail.com> Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by:
-
Alessandro Miceli authored
commit f27f5b0e upstream. Added Sveon STV20 device based on Realtek RTL2832U and FC0012 tuner Signed-off-by:
-
Brian Healy authored
commit 9ca24ae4 upstream. Add USB ID for Peak DVB-T USB. [crope@iki.fi: fix Brian email address and indentation] Signed-off-by:
Brian Healy <healybrian@gmail.com> Signed-off-by:
-
Jan Vcelak authored
commit 60aa4c6f upstream. Signed-off-by:
Jan Vcelak <jv@fcelda.cz> Signed-off-by:
-
Jan Vcelak authored
commit ac298ccd upstream. 0458:707f KYE Systems Corp. (Mouse Systems) TVGo DVB-T03 [RTL2832] The USB dongle uses RTL2832U demodulator and FC0012 tuner. Signed-off-by:
-
Till Dörges authored
commit a24bc323 upstream. I've got the following DAB USB stick that also works fine with the DVB_USB_RTL28XXU driver after I added its USB ID: Bus 001 Device 009: ID 0ccd:00b4 TerraTec Electronic GmbH [crope@iki.fi: apply patch partly manually] Signed-off-by:
Till Dörges <till@doerges.net> Signed-off-by:
-
Tomas Winkler authored
commit 07cd7be3 upstream. It my take time till ME_RDY will be cleared after the reset, so we cannot check the bit before we got the interrupt Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
-
Andy Lutomirski authored
commit a3c54931 upstream. Fixes an easy DoS and possible information disclosure. This does nothing about the broken state of x32 auditing. eparis: If the admin has enabled auditd and has specifically loaded audit rules. This bug has been around since before git. Wow... Signed-off-by:
Eric Paris <eparis@redhat.com> Signed-off-by:
-
Nicholas Bellinger authored
commit e7810c2d upstream. This patch allows READ_CAPACITY + SAI_READ_CAPACITY_16 opcode processing to occur while the associated ALUA group is in Standby access state. This is required to avoid host side LUN probe failures during the initial scan if an ALUA group has already implicitly changed into Standby access state. This addresses a bug reported by Chris + Philip using dm-multipath + ESX hosts configured with ALUA multipath. (Drop v3.15 specific set_ascq usage - nab) Reported-by:
Chris Boot <crb@tiger-computing.co.uk> Reported-by:
Philip Gaw <pgaw@darktech.org.uk> Cc: Chris Boot <crb@tiger-computing.co.uk> Cc: Philip Gaw <pgaw@darktech.org.uk> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Nicholas Bellinger authored
commit 2363d196 upstream. This patch fixes a iser-target specific regression introduced in v3.15-rc6 with: commit 14f4b54f Author: Sagi Grimberg <sagig@mellanox.com> Date: Tue Apr 29 13:13:47 2014 +0300 Target/iscsi,iser: Avoid accepting transport connections during stop stage where the change to set iscsi_np->enabled = false within iscsit_clear_tpg_np_login_thread() meant that a iscsi_np with two iscsi_tpg_np exports would have it's parent iscsi_np set to a disabled state, even if other iscsi_tpg_np exports still existed. This patch changes iscsit_clear_tpg_np_login_thread() to only set iscsi_np->enabled = false when shutdown = true, and also changes iscsit_del_np() to set iscsi_np->enabled = true when iscsi_np->np_exports is non zero. Cc: Sagi Grimberg <sagig@dev.mellanox.co.il> Signed-off-by:
-
Sagi Grimberg authored
commit 14f4b54f upstream. When the target is in stop stage, iSER transport initiates RDMA disconnects. The iSER initiator may wish to establish a new connection over the still existing network portal. In this case iSER transport should not accept and resume new RDMA connections. In order to learn that, iscsi_np is added with enabled flag so the iSER transport can check when deciding weather to accept and resume a new connection request. The iscsi_np is enabled after successful transport setup, and disabled before iscsi_np login threads are cleaned up. Signed-off-by:
Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
-
Andy Lutomirski authored
commit 23adbe12 upstream. The kernel has no concept of capabilities with respect to inodes; inodes exist independently of namespaces. For example, inode_capable(inode, CAP_LINUX_IMMUTABLE) would be nonsense. This patch changes inode_capable to check for uid and gid mappings and renames it to capable_wrt_inode_uidgid, which should make it more obvious what it does. Fixes CVE-2014-4014. Cc: Theodore Ts'o <tytso@mit.edu> Cc: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Robert Backhaus authored
commit d22d32e1 upstream. GIT_AUTHOR_DATE=1386943312 Add USB IDs for the WinFast DTV Dongle Mini. Device is tested and works fine under MythTV Signed-off-by:
Robert Backhaus <robbak@robbak.com> Acked-by:
-
Antti Palosaari authored
commit 8fdd33b1 upstream. Components are RTL2832P + R828D + MN88472. Currently support only DVB-T as there is no driver for MN88472 demod. Signed-off-by:
-
Michael Welling authored
commit 99e4b98d upstream. The chips variable needs to be incremented for each chip that is found in the spi_present_mask when registering via device tree. Without this and the checking a negative index is passed to the data->chip array in a subsequent loop. Signed-off-by:
Michael Welling <mwelling@ieee.org> Acked-by:
Peter Korsgaard <peter@korsgaard.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Nicholas Bellinger authored
commit f1453773 upstream. This patch fixes a OOPs where an attempt to write to the per-device alua_access_state configfs attribute at: /sys/kernel/config/target/core/$HBA/$DEV/alua/$TG_PT_GP/alua_access_state results in an NULL pointer dereference when the backend device has not yet been configured. This patch adds an explicit check for DF_CONFIGURED, and fails with -ENODEV to avoid this case. Reported-by:
-
Nicholas Bellinger authored
commit 6cc44a6f upstream. This patch addresses a bug where an early exception for SCSI WRITE with ImmediateData=Yes was missing the target_put_sess_cmd() call to drop the extra se_cmd->cmd_kref reference obtained during the normal iscsit_setup_scsi_cmd() codepath execution. This bug was manifesting itself during session shutdown within isert_cq_rx_comp_err() where target_wait_for_sess_cmds() would end up waiting indefinately for the last se_cmd->cmd_kref put to occur for the failed SCSI WRITE + ImmediateData descriptors. This fix follows what traditional iscsi-target code already does for the same failure case within iscsit_get_immediate_data(). Reported-by:
Sagi Grimberg <sagig@dev.mellanox.co.il> Cc: Sagi Grimberg <sagig@dev.mellanox.co.il> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
