- 28 Dec, 2018 40 commits
-
-
Wei Yang authored
per_cpu_pageset is cleared by memset, it is not necessary to reset it again. Link: http://lkml.kernel.org/r/20181021023920.5501-1-richard.weiyang@gmail.comSigned-off-by:
Wei Yang <richard.weiyang@gmail.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Michal Hocko authored
Per-cpu numa_node provides a default node for each possible cpu. The association gets initialized during the boot when the architecture specific code explores cpu->NUMA affinity. When the whole NUMA node is removed though we are clearing this association try_offline_node check_and_unmap_cpu_on_node unmap_cpu_on_node numa_clear_node numa_set_node(cpu, NUMA_NO_NODE) This means that whoever calls cpu_to_node for a cpu associated with such a node will get NUMA_NO_NODE. This is problematic for two reasons. First it is fragile because __alloc_pages_node would simply blow up on an out-of-bound access. We have encountered this when loading kvm module BUG: unable to handle kernel paging request at 00000000000021c0 IP: __alloc_pages_nodemask+0x93/0xb70 PGD 800000ffe853e067 PUD 7336bbc067 PMD 0 Oops: 0000 [#1] SMP [...] CPU: 88 PID: 1223749 Comm: modprobe Tainted: G W 4.4.156-94.64-default #1 RIP: __alloc_pages_nodemask+0x93/0xb70 RSP: 0018:ffff887354493b40 EFLAGS: 00010202 RAX: 00000000000021c0 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000002 RDI: 00000000014000c0 RBP: 00000000014000c0 R08: ffffffffffffffff R09: 0000000000000000 R10: ffff88fffc89e790 R11: 0000000000014000 R12: 0000000000000101 R13: ffffffffa0772cd4 R14: ffffffffa0769ac0 R15: 0000000000000000 FS: 00007fdf2f2f1700(0000) GS:ffff88fffc880000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000021c0 CR3: 00000077205ee000 CR4: 0000000000360670 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: alloc_vmcs_cpu+0x3d/0x90 [kvm_intel] hardware_setup+0x781/0x849 [kvm_intel] kvm_arch_hardware_setup+0x28/0x190 [kvm] kvm_init+0x7c/0x2d0 [kvm] vmx_init+0x1e/0x32c [kvm_intel] do_one_initcall+0xca/0x1f0 do_init_module+0x5a/0x1d7 load_module+0x1393/0x1c90 SYSC_finit_module+0x70/0xa0 entry_SYSCALL_64_fastpath+0x1e/0xb7 DWARF2 unwinder stuck at entry_SYSCALL_64_fastpath+0x1e/0xb7 on an older kernel but the code is basically the same in the current Linus tree as well. alloc_vmcs_cpu could use alloc_pages_nodemask which would recognize NUMA_NO_NODE and use alloc_pages_node which would translate it to numa_mem_id but that is wrong as well because it would use a cpu affinity of the local CPU which might be quite far from the original node. It is also reasonable to expect that cpu_to_node will provide a sane value and there might be many more callers like that. The second problem is that __register_one_node relies on cpu_to_node to properly associate cpus back to the node when it is onlined. We do not want to lose that link as there is no arch independent way to get it from the early boot time AFAICS. Drop the whole check_and_unmap_cpu_on_node machinery and keep the association to fix both issues. The NODE_DATA(nid) is not deallocated so it will stay in place and if anybody wants to allocate from that node then a fallback node will be used. Thanks to Vlastimil Babka for his live system debugging skills that helped debugging the issue. Link: http://lkml.kernel.org/r/20181108100413.966-1-mhocko@kernel.org Fixes: e13fe869 ("cpu-hotplug,memory-hotplug: clear cpu_to_node() when offlining the node") Signed-off-by:Michal Hocko <mhocko@suse.com> Debugged-by:
Vlastimil Babka <vbabka@suse.cz> Reported-by:
Miroslav Benes <mbenes@suse.cz> Acked-by:
Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by:
-
Yangtao Li authored
We should get rid of this function. It no longer serves its purpose. This is a historical artifact from 2005 where do_brk was called outside of the core mm. We do have a proper abstraction in vm_brk_flags and that one does the locking properly so there is no need to use this function. Link: http://lkml.kernel.org/r/20181108174856.10811-1-tiny.windzz@gmail.comSigned-off-by:
Yangtao Li <tiny.windzz@gmail.com> Acked-by:
David Rientjes <rientjes@google.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by:
-
Timofey Titovets authored
Replace jhash2 with xxhash. Perf numbers: Intel(R) Xeon(R) CPU E5-2420 v2 @ 2.20GHz ksm: crc32c hash() 12081 MB/s ksm: xxh64 hash() 8770 MB/s ksm: xxh32 hash() 4529 MB/s ksm: jhash2 hash() 1569 MB/s Sioh Lee did some testing: crc32c_intel: 1084.10ns crc32c (no hardware acceleration): 7012.51ns xxhash32: 2227.75ns xxhash64: 1413.16ns jhash2: 5128.30ns As jhash2 always will be slower (for data size like PAGE_SIZE). Don't use it in ksm at all. Use only xxhash for now, because for using crc32c, cryptoapi must be initialized first - that requires some tricky solution to work well in all situations. Link: http://lkml.kernel.org/r/20181023182554.23464-3-nefelim4ag@gmail.comSigned-off-by:
Timofey Titovets <nefelim4ag@gmail.com> Signed-off-by:
leesioh <solee@os.korea.ac.kr> Reviewed-by:
Pavel Tatashin <pavel.tatashin@microsoft.com> Reviewed-by:
Mike Rapoport <rppt@linux.vnet.ibm.com> Reviewed-by:
-
Timofey Titovets authored
Patch series "Currently used jhash are slow enough and replace it allow as to make KSM", v8. Apeed (in kernel): ksm: crc32c hash() 12081 MB/s ksm: xxh64 hash() 8770 MB/s ksm: xxh32 hash() 4529 MB/s ksm: jhash2 hash() 1569 MB/s Sioh Lee's testing (copy from other mail): Test platform: openstack cloud platform (NEWTON version) Experiment node: openstack based cloud compute node (CPU: xeon E5-2620 v3, memory 64gb) VM: (2 VCPU, RAM 4GB, DISK 20GB) * 4 Linux kernel: 4.14 (latest version) KSM setup - sleep_millisecs: 200ms, pages_to_scan: 200 Experiment process: Firstly, we turn off KSM and launch 4 VMs. Then we turn on the KSM and measure the checksum computation time until full_scans become two. The experimental results (the experimental value is the average of the measured values) crc32c_intel: 1084.10ns crc32c (no hardware acceleration): 7012.51ns xxhash32: 2227.75ns xxhash64: 1413.16ns jhash2: 5128.30ns In summary, the result shows that crc32c_intel has advantages over all of the hash function used in the experiment. (decreased by 84.54% compared to crc32c, 78.86% compared to jhash2, 51.33% xxhash32, 23.28% compared to xxhash64) the results are similar to those of Timofey. But, use only xxhash for now, because for using crc32c, cryptoapi must be initialized first - that require some tricky solution to work good in all situations. So: - First patch implement compile time pickup of fastest implementation of xxhash for target platform. - The second patch replaces jhash2 with xxhash This patch (of 2): xxh32() - fast on both 32/64-bit platforms xxh64() - fast only on 64-bit platform Create xxhash() which will pick up the fastest version at compile time. Link: http://lkml.kernel.org/r/20181023182554.23464-2-nefelim4ag@gmail.comSigned-off-by: -
Michal Hocko authored
Heiko has complained that his log is swamped by warnings from has_unmovable_pages [ 20.536664] page dumped because: has_unmovable_pages [ 20.536792] page:000003d081ff4080 count:1 mapcount:0 mapping:000000008ff88600 index:0x0 compound_mapcount: 0 [ 20.536794] flags: 0x3fffe0000010200(slab|head) [ 20.536795] raw: 03fffe0000010200 0000000000000100 0000000000000200 000000008ff88600 [ 20.536796] raw: 0000000000000000 0020004100000000 ffffffff00000001 0000000000000000 [ 20.536797] page dumped because: has_unmovable_pages [ 20.536814] page:000003d0823b0000 count:1 mapcount:0 mapping:0000000000000000 index:0x0 [ 20.536815] flags: 0x7fffe0000000000() [ 20.536817] raw: 07fffe0000000000 0000000000000100 0000000000000200 0000000000000000 [ 20.536818] raw: 0000000000000000 0000000000000000 ffffffff00000001 0000000000000000 which are not triggered by the memory hotplug but rather CMA allocator. The original idea behind dumping the page state for all call paths was that these messages will be helpful debugging failures. From the above it seems that this is not the case for the CMA path because we are lacking much more context. E.g the second reported page might be a CMA allocated page. It is still interesting to see a slab page in the CMA area but it is hard to tell whether this is bug from the above output alone. Address this issue by dumping the page state only on request. Both start_isolate_page_range and has_unmovable_pages already have an argument to ignore hwpoison pages so make this argument more generic and turn it into flags and allow callers to combine non-default modes into a mask. While we are at it, has_unmovable_pages call from is_pageblock_removable_nolock (sysfs removable file) is questionable to report the failure so drop it from there as well. Link: http://lkml.kernel.org/r/20181218092802.31429-1-mhocko@kernel.orgSigned-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by:
Oscar Salvador <osalvador@suse.de> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Michal Hocko authored
There is only very limited information printed when the memory offlining fails: [ 1984.506184] rac1 kernel: memory offlining [mem 0x82600000000-0x8267fffffff] failed due to signal backoff This tells us that the failure is triggered by the userspace intervention but it doesn't tell us much more about the underlying reason. It might be that the page migration failes repeatedly and the userspace timeout expires and send a signal or it might be some of the earlier steps (isolation, memory notifier) takes too long. If the migration failes then it would be really helpful to see which page that and its state. The same applies to the isolation phase. If we fail to isolate a page from the allocator then knowing the state of the page would be helpful as well. Dump the page state that fails to get isolated or migrated. This will tell us more about the failure and what to focus on during debugging. [akpm@linux-foundation.org: add missing printk arg] [mhocko@suse.com: tweak dump_page() `reason' text] Link: http://lkml.kernel.org/r/20181116083020.20260-6-mhocko@kernel.org Link: http://lkml.kernel.org/r/20181107101830.17405-6-mhocko@kernel.orgSigned-off-by:
-
Michal Hocko authored
The memory offlining failure reporting is inconsistent and insufficient. Some error paths simply do not report the failure to the log at all. When we do report there are no details about the reason of the failure and there are several of them which makes memory offlining failures hard to debug. Make sure that the memory offlining [mem %#010llx-%#010llx] failed message is printed for all failures and also provide a short textual reason for the failure e.g. [ 1984.506184] rac1 kernel: memory offlining [mem 0x82600000000-0x8267fffffff] failed due to signal backoff this tells us that the offlining has failed because of a signal pending aka user intervention. [akpm@linux-foundation.org: tweak messages a bit] Link: http://lkml.kernel.org/r/20181107101830.17405-5-mhocko@kernel.orgSigned-off-by:
-
Michal Hocko authored
This function is never called from a context which would provide misaligned pfn range so drop the pointless check. Link: http://lkml.kernel.org/r/20181107101830.17405-4-mhocko@kernel.orgSigned-off-by:
-
Michal Hocko authored
__dump_page messages use KERN_EMERG resp. KERN_ALERT loglevel (this is the case since 2004). Most callers of this function are really detecting a critical page state and BUG right after. On the other hand the function is called also from contexts which just want to inform about the page state and those would rather not disrupt logs that much (e.g. some systems route these messages to the normal console). Reduce the loglevel to KERN_WARNING to make dump_page easier to reuse for other contexts while those messages will still make it to the kernel log in most setups. Even if the loglevel setup filters warnings away those paths that are really critical already print the more targeted error or panic and that should make it to the kernel log. [mhocko@kernel.org: fix __dump_page()] Link: http://lkml.kernel.org/r/20181212142540.GA7378@dhcp22.suse.cz [akpm@linux-foundation.org: s/KERN_WARN/KERN_WARNING/, per Michal] Link: http://lkml.kernel.org/r/20181107101830.17405-3-mhocko@kernel.orgSigned-off-by:
-
Michal Hocko authored
I have been promissing to improve memory offlining failures debugging for quite some time. As things stand now we get only very limited information in the kernel log when the offlining fails. It is usually only [ 1984.506184] rac1 kernel: memory offlining [mem 0x82600000000-0x8267fffffff] failed with no further details. We do not know what exactly fails and for what reason. Whenever I was forced to debug such a failure I've always had to do a debugging patch to tell me more. We can enable some tracepoints but it would be much better to get a better picture without using them. This patch series does 2 things. The first one is to make dump_page more usable by printing more information about the mapping patch 1. Then it reduces the log level from emerg to warning so that this function is usable from less critical context patch 2. Then I have added more detailed information about the offlining failure patch 4 and finally add dump_page to isolation and offlining migration paths. Patch 3 is a trivial cleanup. This patch (of 6): __dump_page prints the mapping pointer but that is quite unhelpful for many reports because the pointer itself only helps to distinguish anon/ksm mappings from other ones (because of lowest bits set). Sometimes it would be much more helpful to know what kind of mapping that is actually and if we know this is a file mapping then also try to resolve the dentry name. [dan.carpenter@oracle.com: fix a width vs precision bug in printk] Link: http://lkml.kernel.org/r/20181123072135.gqvblm2vdujbvfjs@kili.mountain [mhocko@kernel.org: use %dp to print dentry] Link: http://lkml.kernel.org/r/20181125080834.GB12455@dhcp22.suse.cz Link: http://lkml.kernel.org/r/20181107101830.17405-2-mhocko@kernel.orgSigned-off-by:
William Kucharski <william.kucharski@oracle.com> Cc: Oscar Salvador <OSalvador@suse.com> Cc: Baoquan He <bhe@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by:
-
Gao Xiang authored
It's a trivial simplification for get_next_ra_size() and clear enough for humans to understand. It also fixes potential overflow if ra->size(< ra_pages) is too large. Link: http://lkml.kernel.org/r/1540707206-19649-1-git-send-email-hsiangkao@aol.comSigned-off-by:
Gao Xiang <hsiangkao@aol.com> Reviewed-by:
Fengguang Wu <fengguang.wu@intel.com> Reviewed-by:
Matthew Wilcox <willy@infradead.org> Signed-off-by:
-
Anders Roxell authored
This happened while running in qemu-system-aarch64, the AMBA PL011 UART driver when enabling CONFIG_DEBUG_TEST_DRIVER_REMOVE. arch_initcall(pl011_init) came before subsys_initcall(default_bdi_init), devtmpfs' handle_remove() crashes because the reference count is a NULL pointer only because wb->bdi hasn't been initialized yet. Rework so that wb_put have an extra check if wb->bdi before decrement wb->refcnt and also add a WARN_ON_ONCE to get a warning if it happens again in other drivers. Link: http://lkml.kernel.org/r/20181030113545.30999-2-anders.roxell@linaro.org Fixes: 52ebea74 ("writeback: make backing_dev_info host cgroup-specific bdi_writebacks") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Anders Roxell <anders.roxell@linaro.org> Co-developed-by:
-
Sean Christopherson authored
Contrary to its name, mmu_notifier_synchronize() does not synchronize the notifier's SRCU instance, but rather waits for RCU callbacks to finish. i.e. it invokes rcu_barrier(). The RCU documentation is quite clear on this matter, explicitly calling out that rcu_barrier() does not imply synchronize_rcu(). As there are no callers of mmu_notifier_synchronize() and it's unclear whether any user of mmu_notifier_call_srcu() will ever want to barrier on their callbacks, simply remove the function. Link: http://lkml.kernel.org/r/20181106134705.14197-1-sean.j.christopherson@intel.comSigned-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by:
-
Balbir Singh authored
In hot remove, we try to clear poisoned pages, but a small optimization to check if num_poisoned_pages is 0 helps remove the iteration through nr_pages. [akpm@linux-foundation.org: tweak comment text] Link: http://lkml.kernel.org/r/20181102120001.4526-1-bsingharora@gmail.comSigned-off-by:
Balbir Singh <bsingharora@gmail.com> Acked-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
-
Miles Chen authored
The (root-only) page owner read might allocate a large size of memory with a large read count. Allocation fails can easily occur when doing high order allocations. Clamp buffer size to PAGE_SIZE to avoid arbitrary size allocation and avoid allocation fails due to high order allocation. [akpm@linux-foundation.org: use min_t()] Link: http://lkml.kernel.org/r/1541091607-27402-1-git-send-email-miles.chen@mediatek.comSigned-off-by:
Miles Chen <miles.chen@mediatek.com> Acked-by:
-
Vlastimil Babka authored
Multiple people have reported the following sparse warning: ./include/linux/slab.h:332:43: warning: dubious: x & !y The minimal fix would be to change the logical & to boolean &&, which emits the same code, but Andrew has suggested that the branch-avoiding tricks are maybe not worthwile. David Laight provided a nice comparison of disassembly of multiple variants, which shows that the current version produces a 4 deep dependency chain, and fixing the sparse warning by changing logical and to multiplication emits an IMUL, making it even more expensive. The code as rewritten by this patch yielded the best disassembly, with a single predictable branch for the most common case, and a ternary operator for the rest, which gcc seems to compile without a branch or cmov by itself. The result should be more readable, without a sparse warning and probably also faster for the common case. Link: http://lkml.kernel.org/r/80340595-d7c5-97b9-4f6c-23fa893a91e9@suse.cz Fixes: 1291523f ("mm, slab/slub: introduce kmalloc-reclaimable caches") Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Reported-by:
Darryl T. Agostinelli <dagostinelli@gmail.com> Reported-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Suggested-by:
David Laight <David.Laight@ACULAB.COM> Signed-off-by:
-
Wei Yang authored
If __cmpxchg_double_slab() fails and (l != m), current code records transition states of slub action. Update the action after __cmpxchg_double_slab() success to record the final state. [akpm@linux-foundation.org: more whitespace cleanup] Link: http://lkml.kernel.org/r/20181107013119.3816-1-richard.weiyang@gmail.comSigned-off-by:
-
Wei Yang authored
node_match() is a static function and is only invoked in slub.c. In all three places, `page' is ensured to be valid. Link: http://lkml.kernel.org/r/20181106150245.1668-1-richard.weiyang@gmail.comSigned-off-by:
Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
-
Wei Yang authored
cpu_slab is a per cpu variable which is allocated in all or none. If a cpu_slab failed to be allocated, the slub is not usable. We could use cpu_slab without validation in __flush_cpu_slab(). Link: http://lkml.kernel.org/r/20181103141218.22844-1-richard.weiyang@gmail.comSigned-off-by:
-
Yangtao Li authored
WARN_ON() already contains an unlikely(), so it's not necessary to use unlikely. Also change WARN_ON() back to WARN_ON_ONCE() to avoid potentially spamming dmesg with user-triggerable large allocations. [akpm@linux-foundation.org: s/WARN_ON/WARN_ON_ONCE/, per Vlastimil] Link: http://lkml.kernel.org/r/20181104125028.3572-1-tiny.windzz@gmail.comSigned-off-by:
-
Junxiao Bi authored
For sync io read in ocfs2_read_blocks_sync(), first clear bh uptodate flag and submit the io, second wait io done, last check whether bh uptodate, if not return io error. If two sync io for the same bh were issued, it could be the first io done and set uptodate flag, but just before check that flag, the second io came in and cleared uptodate, then ocfs2_read_blocks_sync() for the first io will return IO error. Indeed it's not necessary to clear uptodate flag, as the io end handler end_buffer_read_sync() will set or clear it based on io succeed or failed. The following message was found from a nfs server but the underlying storage returned no error. [4106438.567376] (nfsd,7146,3):ocfs2_get_suballoc_slot_bit:2780 ERROR: read block 1238823695 failed -5 [4106438.567569] (nfsd,7146,3):ocfs2_get_suballoc_slot_bit:2812 ERROR: status = -5 [4106438.567611] (nfsd,7146,3):ocfs2_test_inode_bit:2894 ERROR: get alloc slot and bit failed -5 [4106438.567643] (nfsd,7146,3):ocfs2_test_inode_bit:2932 ERROR: status = -5 [4106438.567675] (nfsd,7146,3):ocfs2_get_dentry:94 ERROR: test inode bit failed -5 Same issue in non sync read ocfs2_read_blocks(), fixed it as well. Link: http://lkml.kernel.org/r/20181121020023.3034-4-junxiao.bi@oracle.comSigned-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by:
Changwei Ge <ge.changwei@h3c.com> Reviewed-by:
Yiwen Jiang <jiangyiwen@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Jun Piao <piaojun@huawei.com> Cc: Mark Fasheh <mfasheh@versity.com> Signed-off-by:
-
Junxiao Bi authored
Dirty flag of the journal should be cleared at the last stage of umount, if do it before jbd2_journal_destroy(), then some metadata in uncommitted transaction could be lost due to io error, but as dirty flag of journal was already cleared, we can't find that until run a full fsck. This may cause system panic or other corruption. Link: http://lkml.kernel.org/r/20181121020023.3034-3-junxiao.bi@oracle.comSigned-off-by:
Joseph Qi <jiangqi903@gmail.com> Cc: Jun Piao <piaojun@huawei.com> Cc: Changwei Ge <ge.changwei@h3c.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@versity.com> Signed-off-by:
-
Junxiao Bi authored
mount.ocfs2 ignore the inconsistent error that journal is clean but local alloc is unrecovered. After mount, local alloc not empty, then reserver cluster didn't alloc a new local alloc window, reserveration map is empty(ocfs2_reservation_map.m_bitmap_len = 0), that triggered the following panic. This issue was reported at https://oss.oracle.com/pipermail/ocfs2-devel/2015-May/010854.html and was advised to fixed during mount. But this is a very unusual inconsistent state, usually journal dirty flag should be cleared at the last stage of umount until every other things go right. We may need do further debug to check that. Any way to avoid possible futher corruption, mount should be abort and fsck should be run. (mount.ocfs2,1765,1):ocfs2_load_local_alloc:353 ERROR: Local alloc hasn't been recovered! found = 6518, set = 6518, taken = 8192, off = 15912372 ocfs2: Mounting device (202,64) on (node 0, slot 3) with ordered data mode. o2dlm: Joining domain 89CEAC63CC4F4D03AC185B44E0EE0F3F ( 0 1 2 3 4 5 6 8 ) 8 nodes ocfs2: Mounting device (202,80) on (node 0, slot 3) with ordered data mode. o2hb: Region 89CEAC63CC4F4D03AC185B44E0EE0F3F (xvdf) is now a quorum device o2net: Accepted connection from node yvwsoa17p (num 7) at 172.22.77.88:7777 o2dlm: Node 7 joins domain 64FE421C8C984E6D96ED12C55FEE2435 ( 0 1 2 3 4 5 6 7 8 ) 9 nodes o2dlm: Node 7 joins domain 89CEAC63CC4F4D03AC185B44E0EE0F3F ( 0 1 2 3 4 5 6 7 8 ) 9 nodes ------------[ cut here ]------------ kernel BUG at fs/ocfs2/reservations.c:507! invalid opcode: 0000 [#1] SMP Modules linked in: ocfs2 rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs fscache lockd grace ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs sunrpc ipt_REJECT nf_reject_ipv4 nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 ovmapi ppdev parport_pc parport xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea acpi_cpufreq pcspkr i2c_piix4 i2c_core sg ext4 jbd2 mbcache2 sr_mod cdrom xen_blkfront pata_acpi ata_generic ata_piix floppy dm_mirror dm_region_hash dm_log dm_mod CPU: 0 PID: 4349 Comm: startWebLogic.s Not tainted 4.1.12-124.19.2.el6uek.x86_64 #2 Hardware name: Xen HVM domU, BIOS 4.4.4OVM 09/06/2018 task: ffff8803fb04e200 ti: ffff8800ea4d8000 task.ti: ffff8800ea4d8000 RIP: 0010:[<ffffffffa05e96a8>] [<ffffffffa05e96a8>] __ocfs2_resv_find_window+0x498/0x760 [ocfs2] Call Trace: ocfs2_resmap_resv_bits+0x10d/0x400 [ocfs2] ocfs2_claim_local_alloc_bits+0xd0/0x640 [ocfs2] __ocfs2_claim_clusters+0x178/0x360 [ocfs2] ocfs2_claim_clusters+0x1f/0x30 [ocfs2] ocfs2_convert_inline_data_to_extents+0x634/0xa60 [ocfs2] ocfs2_write_begin_nolock+0x1c6/0x1da0 [ocfs2] ocfs2_write_begin+0x13e/0x230 [ocfs2] generic_perform_write+0xbf/0x1c0 __generic_file_write_iter+0x19c/0x1d0 ocfs2_file_write_iter+0x589/0x1360 [ocfs2] __vfs_write+0xb8/0x110 vfs_write+0xa9/0x1b0 SyS_write+0x46/0xb0 system_call_fastpath+0x18/0xd7 Code: ff ff 8b 75 b8 39 75 b0 8b 45 c8 89 45 98 0f 84 e5 fe ff ff 45 8b 74 24 18 41 8b 54 24 1c e9 56 fc ff ff 85 c0 0f 85 48 ff ff ff <0f> 0b 48 8b 05 cf c3 de ff 48 ba 00 00 00 00 00 00 00 10 48 85 RIP __ocfs2_resv_find_window+0x498/0x760 [ocfs2] RSP <ffff8800ea4db668> ---[ end trace 566f07529f2edf3c ]--- Kernel panic - not syncing: Fatal exception Kernel Offset: disabled Link: http://lkml.kernel.org/r/20181121020023.3034-2-junxiao.bi@oracle.comSigned-off-by:
-
Larry Chen authored
Included file path was hard-wired in the ocfs2 makefile, which might causes some confusion when compiling ocfs2 as an external module. Say if we compile ocfs2 module as following. cp -r /kernel/tree/fs/ocfs2 /other/dir/ocfs2 cd /other/dir/ocfs2 make -C /path/to/kernel_source M=`pwd` modules Acutally, the compiler wil try to find included file in /kernel/tree/fs/ocfs2, rather than the directory /other/dir/ocfs2. To fix this little bug, we introduce the var $(src) provided by kbuild. $(src) means the absolute path of the running kbuild file. Link: http://lkml.kernel.org/r/20181108085546.15149-1-lchen@suse.comSigned-off-by:
Larry Chen <lchen@suse.com> Reviewed-by:
-
zhong jiang authored
lastzero is not used after setting its value. It is safe to remove the unused variable. Link: http://lkml.kernel.org/r/1540296942-24533-1-git-send-email-zhongjiang@huawei.comSigned-off-by:
zhong jiang <zhongjiang@huawei.com> Reviewed-by:
-
zhong jiang authored
status is not used after setting its value. It is safe to remove the unused variable. Link: http://lkml.kernel.org/r/1540300179-26697-1-git-send-email-zhongjiang@huawei.comSigned-off-by:
Jun Piao <piaojun@huawei.com> Acked-by:
-
Jia Guo authored
Reading heartbeat data from lowest node rather than from zero, in cases where the node is not defined from zero, can reduce the number of sectors read. Here is a simple test data obtained with 'iostat -dmx dm-5 2', with two nodes in the cluster, node number 10, 20, respectively. Before optimization: Device: rrqm/s wrqm/s r/s w/s rMB/s wMB/s avgrq-sz avgqu-sz await r_await w_await svctm %util dm-5 0.00 0.00 0.50 0.50 0.01 0.00 11.00 0.00 1.00 1.00 1.00 1.50 0.15 After the optimization: Device: rrqm/s wrqm/s r/s w/s rMB/s wMB/s avgrq-sz avgqu-sz await r_await w_await svctm %util dm-5 0.00 0.00 0.50 0.50 0.00 0.00 6.00 0.00 0.50 1.00 0.00 0.50 0.05 Link: http://lkml.kernel.org/r/99fe4988-69ac-3615-a218-3042fe6fbe72@huawei.comSigned-off-by:
Jia Guo <guojia12@huawei.com> Reviewed-by:
-
Qian Cai authored
The current value of the early boot static pool size, 1024 is not big enough for systems with large number of CPUs with timer or/and workqueue objects selected. As the results, systems have 60+ CPUs with both timer and workqueue objects enabled could trigger "ODEBUG: Out of memory. ODEBUG disabled". Some debug objects are allocated during the early boot. Enabling some options like timers or workqueue objects may increase the size required significantly with large number of CPUs. For example, CONFIG_DEBUG_OBJECTS_TIMERS: No. CPUs x 2 (worker pool) objects: start_kernel workqueue_init_early init_worker_pool init_timer_key debug_object_init plus No. CPUs objects (CONFIG_HIGH_RES_TIMERS): sched_init hrtick_rq_init hrtimer_init CONFIG_DEBUG_OBJECTS_WORK: No. CPUs objects: vmalloc_init __init_work plus No. CPUs x 6 (workqueue) objects: workqueue_init_early alloc_workqueue __alloc_workqueue_key alloc_and_link_pwqs init_pwq Also, plus No. CPUs objects: perf_event_init __init_srcu_struct init_srcu_struct_fields init_srcu_struct_nodes __init_work However, none of the things are actually used or required before debug_objects_mem_init() is invoked, so just move the call right before vmalloc_init(). According to tglx, "the reason why the call is at this place in start_kernel() is historical. It's because back in the days when debugobjects were added the memory allocator was enabled way later than today." Link: http://lkml.kernel.org/r/20181126102407.1836-1-cai@gmx.usSigned-off-by:Qian Cai <cai@gmx.us> Suggested-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Waiman Long <longman@redhat.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Kuninori Morimoto authored
Update license to use SPDX-License-Identifier instead of verbose license text. Link: http://lkml.kernel.org/r/871s6wcswb.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Signed-off-by:
-
Kuninori Morimoto authored
Update license to use SPDX-License-Identifier instead of verbose license text. Link: http://lkml.kernel.org/r/8736rccswn.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
Update license to use SPDX-License-Identifier instead of verbose license text. Link: http://lkml.kernel.org/r/874lbscswy.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
Update license to use SPDX-License-Identifier instead of verbose license text. Link: http://lkml.kernel.org/r/875zw8csxa.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
Update license to use SPDX-License-Identifier instead of verbose license text. Link: http://lkml.kernel.org/r/877egocsxl.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
Update license to use SPDX-License-Identifier instead of verbose license text. Link: http://lkml.kernel.org/r/878t14csxy.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
Update license to use SPDX-License-Identifier instead of verbose license text, excepting ${LINUX}/arch/sh/kernel/cpu/sh4/softfloat.c which is not GPL license Link: http://lkml.kernel.org/r/87a7lkcsya.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: -
Kuninori Morimoto authored
Update license to use SPDX-License-Identifier instead of verbose license text. Link: http://lkml.kernel.org/r/87bm60csyl.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
Update license to use SPDX-License-Identifier instead of verbose license text. Link: http://lkml.kernel.org/r/87d0qgcsz8.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
Update license to use SPDX-License-Identifier instead of verbose license text. Link: http://lkml.kernel.org/r/87efawcszk.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
Update license to use SPDX-License-Identifier instead of verbose license text. Link: http://lkml.kernel.org/r/87ftvccszx.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
