- 23 Mar, 2018 8 commits
-
-
Kirill A. Shutemov authored
khugepaged is not yet able to convert PTE-mapped huge pages back to PMD mapped. We do not collapse such pages. See check khugepaged_scan_pmd(). But if between khugepaged_scan_pmd() and __collapse_huge_page_isolate() somebody managed to instantiate THP in the range and then split the PMD back to PTEs we would have a problem -- VM_BUG_ON_PAGE(PageCompound(page)) will get triggered. It's possible since we drop mmap_sem during collapse to re-take for write. Replace the VM_BUG_ON() with graceful collapse fail. Link: http://lkml.kernel.org/r/20180315152353.27989-1-kirill.shutemov@linux.intel.com Fixes: b1caa957 ("khugepaged: ignore pmd tables with THP mapped with ptes") Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Toshi Kani authored
Implement pud_free_pmd_page() and pmd_free_pte_page() on x86, which clear a given pud/pmd entry and free up lower level page table(s). The address range associated with the pud/pmd entry must have been purged by INVLPG. Link: http://lkml.kernel.org/r/20180314180155.19492-3-toshi.kani@hpe.com Fixes: e61ce6ad ("mm: change ioremap to set up huge I/O mappings") Signed-off-by:
Toshi Kani <toshi.kani@hpe.com> Reported-by:
Lei Li <lious.lilei@hisilicon.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Toshi Kani authored
On architectures with CONFIG_HAVE_ARCH_HUGE_VMAP set, ioremap() may create pud/pmd mappings. A kernel panic was observed on arm64 systems with Cortex-A75 in the following steps as described by Hanjun Guo. 1. ioremap a 4K size, valid page table will build, 2. iounmap it, pte0 will set to 0; 3. ioremap the same address with 2M size, pgd/pmd is unchanged, then set the a new value for pmd; 4. pte0 is leaked; 5. CPU may meet exception because the old pmd is still in TLB, which will lead to kernel panic. This panic is not reproducible on x86. INVLPG, called from iounmap, purges all levels of entries associated with purged address on x86. x86 still has memory leak. The patch changes the ioremap path to free unmapped page table(s) since doing so in the unmap path has the following issues: - The iounmap() path is shared with vunmap(). Since vmap() only supports pte mappings, making vunmap() to free a pte page is an overhead for regular vmap users as they do not need a pte page freed up. - Checking if all entries in a pte page are cleared in the unmap path is racy, and serializing this check is expensive. - The unmap path calls free_vmap_area_noflush() to do lazy TLB purges. Clearing a pud/pmd entry before the lazy TLB purges needs extra TLB purge. Add two interfaces, pud_free_pmd_page() and pmd_free_pte_page(), which clear a given pud/pmd entry and free up a page for the lower level entries. This patch implements their stub functions on x86 and arm64, which work as workaround. [akpm@linux-foundation.org: fix typo in pmd_free_pte_page() stub] Link: http://lkml.kernel.org/r/20180314180155.19492-2-toshi.kani@hpe.com Fixes: e61ce6ad ("mm: change ioremap to set up huge I/O mappings") Reported-by: -
Arnd Bergmann authored
A bugfix I did earlier caused a build regression on h8300, which defines the __BIG_ENDIAN macro in a slightly different way than the generic code: arch/h8300/include/asm/byteorder.h:5:0: warning: "__BIG_ENDIAN" redefined We don't need to define it here, as the same macro is already provided by the linux/byteorder/big_endian.h, and that version does not conflict. While this is a v4.16 regression, my earlier patch also got backported to the 4.14 and 4.15 stable kernels, so we need the fixup there as well. Link: http://lkml.kernel.org/r/20180313120752.2645129-1-arnd@arndb.de Fixes: 101110f6 ("Kbuild: always define endianess in kconfig.h") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Mike Kravetz authored
A vma with vm_pgoff large enough to overflow a loff_t type when converted to a byte offset can be passed via the remap_file_pages system call. The hugetlbfs mmap routine uses the byte offset to calculate reservations and file size. A sequence such as: mmap(0x20a00000, 0x600000, 0, 0x66033, -1, 0); remap_file_pages(0x20a00000, 0x600000, 0, 0x20000000000000, 0); will result in the following when task exits/file closed, kernel BUG at mm/hugetlb.c:749! Call Trace: hugetlbfs_evict_inode+0x2f/0x40 evict+0xcb/0x190 __dentry_kill+0xcb/0x150 __fput+0x164/0x1e0 task_work_run+0x84/0xa0 exit_to_usermode_loop+0x7d/0x80 do_syscall_64+0x18b/0x190 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 The overflowed pgoff value causes hugetlbfs to try to set up a mapping with a negative range (end < start) that leaves invalid state which causes the BUG. The previous overflow fix to this code was incomplete and did not take the remap_file_pages system call into account. [mike.kravetz@oracle.com: v3] Link: http://lkml.kernel.org/r/20180309002726.7248-1-mike.kravetz@oracle.com [akpm@linux-foundation.org: include mmdebug.h] [akpm@linux-foundation.org: fix -ve left shift count on sh] Link: http://lkml.kernel.org/r/20180308210502.15952-1-mike.kravetz@oracle.com Fixes: 045c7a3f ("hugetlbfs: fix offset overflow in hugetlbfs mmap") Signed-off-by:Mike Kravetz <mike.kravetz@oracle.com> Reported-by:
Nic Losby <blurbdust@gmail.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Yisheng Xie <xieyisheng1@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Tetsuo Handa authored
Dave Jones reported fs_reclaim lockdep warnings. ============================================ WARNING: possible recursive locking detected 4.15.0-rc9-backup-debug+ #1 Not tainted -------------------------------------------- sshd/24800 is trying to acquire lock: (fs_reclaim){+.+.}, at: [<0000000084f438c2>] fs_reclaim_acquire.part.102+0x5/0x30 but task is already holding lock: (fs_reclaim){+.+.}, at: [<0000000084f438c2>] fs_reclaim_acquire.part.102+0x5/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(fs_reclaim); lock(fs_reclaim); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by sshd/24800: #0: (sk_lock-AF_INET6){+.+.}, at: [<000000001a069652>] tcp_sendmsg+0x19/0x40 #1: (fs_reclaim){+.+.}, at: [<0000000084f438c2>] fs_reclaim_acquire.part.102+0x5/0x30 stack backtrace: CPU: 3 PID: 24800 Comm: sshd Not tainted 4.15.0-rc9-backup-debug+ #1 Call Trace: dump_stack+0xbc/0x13f __lock_acquire+0xa09/0x2040 lock_acquire+0x12e/0x350 fs_reclaim_acquire.part.102+0x29/0x30 kmem_cache_alloc+0x3d/0x2c0 alloc_extent_state+0xa7/0x410 __clear_extent_bit+0x3ea/0x570 try_release_extent_mapping+0x21a/0x260 __btrfs_releasepage+0xb0/0x1c0 btrfs_releasepage+0x161/0x170 try_to_release_page+0x162/0x1c0 shrink_page_list+0x1d5a/0x2fb0 shrink_inactive_list+0x451/0x940 shrink_node_memcg.constprop.88+0x4c9/0x5e0 shrink_node+0x12d/0x260 try_to_free_pages+0x418/0xaf0 __alloc_pages_slowpath+0x976/0x1790 __alloc_pages_nodemask+0x52c/0x5c0 new_slab+0x374/0x3f0 ___slab_alloc.constprop.81+0x47e/0x5a0 __slab_alloc.constprop.80+0x32/0x60 __kmalloc_track_caller+0x267/0x310 __kmalloc_reserve.isra.40+0x29/0x80 __alloc_skb+0xee/0x390 sk_stream_alloc_skb+0xb8/0x340 tcp_sendmsg_locked+0x8e6/0x1d30 tcp_sendmsg+0x27/0x40 inet_sendmsg+0xd0/0x310 sock_write_iter+0x17a/0x240 __vfs_write+0x2ab/0x380 vfs_write+0xfb/0x260 SyS_write+0xb6/0x140 do_syscall_64+0x1e5/0xc05 entry_SYSCALL64_slow_path+0x25/0x25 This warning is caused by commit d92a8cfc ("locking/lockdep: Rework FS_RECLAIM annotation") which replaced the use of lockdep_{set,clear}_current_reclaim_state() in __perform_reclaim() and lockdep_trace_alloc() in slab_pre_alloc_hook() with fs_reclaim_acquire()/ fs_reclaim_release(). Since __kmalloc_reserve() from __alloc_skb() adds __GFP_NOMEMALLOC | __GFP_NOWARN to gfp_mask, and all reclaim path simply propagates __GFP_NOMEMALLOC, fs_reclaim_acquire() in slab_pre_alloc_hook() is trying to grab the 'fake' lock again when __perform_reclaim() already grabbed the 'fake' lock. The /* this guy won't enter reclaim */ if ((current->flags & PF_MEMALLOC) && !(gfp_mask & __GFP_NOMEMALLOC)) return false; test which causes slab_pre_alloc_hook() to try to grab the 'fake' lock was added by commit cf40bd16 ("lockdep: annotate reclaim context (__GFP_NOFS)"). But that test is outdated because PF_MEMALLOC thread won't enter reclaim regardless of __GFP_NOMEMALLOC after commit 341ce06f ("page allocator: calculate the alloc_flags for allocation only once") added the PF_MEMALLOC safeguard ( /* Avoid recursion of direct reclaim */ if (p->flags & PF_MEMALLOC) goto nopage; in __alloc_pages_slowpath()). Thus, let's fix outdated test by removing __GFP_NOMEMALLOC test and allow __need_fs_reclaim() to return false. Link: http://lkml.kernel.org/r/201802280650.FJC73911.FOSOMLJVFFQtHO@I-love.SAKURA.ne.jp Fixes: d92a8cfc ("locking/lockdep: Rework FS_RECLAIM annotation") Signed-off-by:Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by:
Dave Jones <davej@codemonkey.org.uk> Tested-by:
-
Mark Fasheh authored
I'd like to use my personal e-mail for Ocfs2 requests and review. Link: http://lkml.kernel.org/r/20180311231356.9385-1-mfasheh@versity.comSigned-off-by:
Mark Fasheh <mark@fasheh.com> Signed-off-by:
-
Yisheng Xie authored
Alexander reported a use of uninitialized memory in __mpol_equal(), which is caused by incorrect use of preferred_node. When mempolicy in mode MPOL_PREFERRED with flags MPOL_F_LOCAL, it uses numa_node_id() instead of preferred_node, however, __mpol_equal() uses preferred_node without checking whether it is MPOL_F_LOCAL or not. [akpm@linux-foundation.org: slight comment tweak] Link: http://lkml.kernel.org/r/4ebee1c2-57f6-bcb8-0e2d-1833d1ee0bb7@huawei.com Fixes: fc36b8d3 ("mempolicy: use MPOL_F_LOCAL to Indicate Preferred Local Policy") Signed-off-by:
Yisheng Xie <xieyisheng1@huawei.com> Reported-by:
Alexander Potapenko <glider@google.com> Tested-by:
-
- 21 Mar, 2018 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fixes from Stephen Boyd: "A late collection of fixes for regressions seen this release cycle. Normally I send this earlier than now but real life got in the way. Things are back to normal now. There's the normal set of SoC driver fixes: i.MX boot warning, TI display clks, allwinner clk ops being wrong (fun), driver probe badness on error paths, correctness fix for the new aspeed driver, and even a fix for a race condition in the bcm2835 clk driver. At the core framework level we also got some fixes for the clk phase API caching at the wrong time, better handling of the enabled state of orphan clks, and a fix for a newly introduced bug in how we handle rate calculations for pass-through clks" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: bcm2835: Protect sections updating shared registers clk: bcm2835: Fix ana->maskX definitions clk: aspeed: Prevent reset if clock is enabled clk: aspeed: Fix is_enabled for certain clocks clk: qcom: msm8916: Fix return value check in qcom_apcs_msm8916_clk_probe() clk: hisilicon: hi3660：Fix potential NULL dereference in hi3660_stub_clk_probe() clk: fix determine rate error with pass-through clock clk: migrate the count of orphaned clocks at init clk: update cached phase to respect the fact when setting phase clk: ti: am43xx: add set-rate-parent support for display clkctrl clock clk: ti: am33xx: add set-rate-parent support for display clkctrl clock clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag clk: imx51-imx53: Fix UART4/5 registration on i.MX50 and i.MX53 clk: sunxi-ng: a31: Fix CLK_OUT_* clock ops
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Jason Gunthorpe: "Not much exciting here, almost entirely syzkaller fixes. This is going to be on ongoing theme for some time, I think. Both Google and Mellanox are now running syzkaller on different parts of the user API. Summary: - Many bug fixes related to syzkaller from Leon Romanovsky. These are still for the mlx driver and ucma interface. - Fix a situation with port reuse for iWarp, discovered during scale-up testing - Bug fixes for the profile and restrack patches accepted during this merge window - Compile warning cleanups from Arnd, this is apparently the last warning to make 32 bit builds quiet" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/ucma: Ensure that CM_ID exists prior to access it RDMA/verbs: Remove restrack entry from XRCD structure RDMA/ucma: Fix use-after-free access in ucma_close RDMA/ucma: Check AF family prior resolving address infiniband: bnxt_re: use BIT_ULL() for 64-bit bit masks infiniband: qplib_fp: fix pointer cast IB/mlx5: Fix cleanup order on unload RDMA/ucma: Don't allow join attempts for unsupported AF family RDMA/ucma: Fix access to non-initialized CM_ID object RDMA/core: Do not use invalid destination in determining port reuse RDMA/mlx5: Fix crash while accessing garbage pointer and freed memory IB/mlx5: Fix integer overflows in mlx5_ib_create_srq IB/mlx5: Fix out-of-bounds read in create_raw_packet_qp_rq
-
- 20 Mar, 2018 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: - one driver patch (qla2xxx) which fixes a problem caused by an existing regression fix (FCP discovery is failing) - one generic fix to a longstanding bug in libsas that causes I/O eventually to hang to the device in the face of ATA error recovery. * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: Remove FC_NO_LOOP_ID for FCP and FC-NVMe Discovery scsi: libsas: defer ata device eh commands to libata
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull nfsd fix from Bruce Fields: "Just one fix for an occasional panic from Jeff Layton" * tag 'nfsd-4.16-1' of git://linux-nfs.org/~bfields/linux: nfsd: remove blocked locks on client teardown
-
Linus Torvalds authored
The undocumented 'icebp' instruction (aka 'int1') works pretty much like 'int3' in the absense of in-circuit probing equipment (except, obviously, that it raises #DB instead of raising #BP), and is used by some validation test-suites as such. But Andy Lutomirski noticed that his test suite acted differently in kvm than on bare hardware. The reason is that kvm used an inexact test for the icebp instruction: it just assumed that an all-zero VM exit qualification value meant that the VM exit was due to icebp. That is not unlike the guess that do_debug() does for the actual exception handling case, but it's purely a heuristic, not an absolute rule. do_debug() does it because it wants to ascribe _some_ reasons to the #DB that happened, and an empty %dr6 value means that 'icebp' is the most likely casue and we have no better information. But kvm can just do it right, because unlike the do_debug() case, kvm actually sees the real reason for the #DB in the VM-exit interruption information field. So instead of relying on an inexact heuristic, just use the actual VM exit information that says "it was 'icebp'". Right now the 'icebp' instruction isn't technically documented by Intel, but that will hopefully change. The special "privileged software exception" information _is_ actually mentioned in the Intel SDM, even though the cause of it isn't enumerated. Reported-by:
Andy Lutomirski <luto@kernel.org> Tested-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Leon Romanovsky authored
Prior to access UCMA commands, the context should be initialized and connected to CM_ID with ucma_create_id(). In case user skips this step, he can provide non-valid ctx without CM_ID and cause to multiple NULL dereferences. Also there are situations where the create_id can be raced with other user access, ensure that the context is only shared to other threads once it is fully initialized to avoid the races. [ 109.088108] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 [ 109.090315] IP: ucma_connect+0x138/0x1d0 [ 109.092595] PGD 80000001dc02d067 P4D 80000001dc02d067 PUD 1da9ef067 PMD 0 [ 109.095384] Oops: 0000 [#1] SMP KASAN PTI [ 109.097834] CPU: 0 PID: 663 Comm: uclose Tainted: G B 4.16.0-rc1-00062-g2975d5de #45 [ 109.100816] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 [ 109.105943] RIP: 0010:ucma_connect+0x138/0x1d0 [ 109.108850] RSP: 0018:ffff8801c8567a80 EFLAGS: 00010246 [ 109.111484] RAX: 0000000000000000 RBX: 1ffff100390acf50 RCX: ffffffff9d7812e2 [ 109.114496] RDX: 1ffffffff3f507a5 RSI: 0000000000000297 RDI: 0000000000000297 [ 109.117490] RBP: ffff8801daa15600 R08: 0000000000000000 R09: ffffed00390aceeb [ 109.120429] R10: 0000000000000001 R11: ffffed00390aceea R12: 0000000000000000 [ 109.123318] R13: 0000000000000120 R14: ffff8801de6459c0 R15: 0000000000000118 [ 109.126221] FS: 00007fabb68d6700(0000) GS:ffff8801e5c00000(0000) knlGS:0000000000000000 [ 109.129468] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 109.132523] CR2: 0000000000000020 CR3: 00000001d45d8003 CR4: 00000000003606b0 [ 109.135573] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 109.138716] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 109.142057] Call Trace: [ 109.144160] ? ucma_listen+0x110/0x110 [ 109.146386] ? wake_up_q+0x59/0x90 [ 109.148853] ? futex_wake+0x10b/0x2a0 [ 109.151297] ? save_stack+0x89/0xb0 [ 109.153489] ? _copy_from_user+0x5e/0x90 [ 109.155500] ucma_write+0x174/0x1f0 [ 109.157933] ? ucma_resolve_route+0xf0/0xf0 [ 109.160389] ? __mod_node_page_state+0x1d/0x80 [ 109.162706] __vfs_write+0xc4/0x350 [ 109.164911] ? kernel_read+0xa0/0xa0 [ 109.167121] ? path_openat+0x1b10/0x1b10 [ 109.169355] ? fsnotify+0x899/0x8f0 [ 109.171567] ? fsnotify_unmount_inodes+0x170/0x170 [ 109.174145] ? __fget+0xa8/0xf0 [ 109.177110] vfs_write+0xf7/0x280 [ 109.179532] SyS_write+0xa1/0x120 [ 109.181885] ? SyS_read+0x120/0x120 [ 109.184482] ? compat_start_thread+0x60/0x60 [ 109.187124] ? SyS_read+0x120/0x120 [ 109.189548] do_syscall_64+0xeb/0x250 [ 109.192178] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 109.194725] RIP: 0033:0x7fabb61ebe99 [ 109.197040] RSP: 002b:00007fabb68d5e98 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 [ 109.200294] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fabb61ebe99 [ 109.203399] RDX: 0000000000000120 RSI: 00000000200001c0 RDI: 0000000000000004 [ 109.206548] RBP: 00007fabb68d5ec0 R08: 0000000000000000 R09: 0000000000000000 [ 109.209902] R10: 0000000000000000 R11: 0000000000000202 R12: 00007fabb68d5fc0 [ 109.213327] R13: 0000000000000000 R14: 00007fff40ab2430 R15: 00007fabb68d69c0 [ 109.216613] Code: 88 44 24 2c 0f b6 84 24 6e 01 00 00 88 44 24 2d 0f b6 84 24 69 01 00 00 88 44 24 2e 8b 44 24 60 89 44 24 30 e8 da f6 06 ff 31 c0 <66> 41 83 7c 24 20 1b 75 04 8b 44 24 64 48 8d 74 24 20 4c 89 e7 [ 109.223602] RIP: ucma_connect+0x138/0x1d0 RSP: ffff8801c8567a80 [ 109.226256] CR2: 0000000000000020 Fixes: 75216638 ("RDMA/cma: Export rdma cm interface to userspace") Reported-by: <syzbot+36712f50b0552615bf59@syzkaller.appspotmail.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
- 19 Mar, 2018 16 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupLinus Torvalds authored
Pull cgroup fixes from Tejun Heo: "Two commits to fix the following subtle cgroup2 behavior bugs: - cpu.max was rejecting config when it shouldn't - thread mode enable was allowed when it shouldn't" * 'for-4.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: fix rule checking for threaded mode switching sched, cgroup: Don't reject lower cpu.max on ancestors
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds authored
Pull workqueue fixes from Tejun Heo: "Two low-impact workqueue commits. One fixes workqueue creation error path and the other removes the unused cancel_work()" * 'for-4.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: remove unused cancel_work() workqueue: use put_device() instead of kfree()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpuLinus Torvalds authored
Pull percpu fixes from Tejun Heo: "Late percpu pull request for v4.16-rc6. - percpu allocator pool replenishing no longer triggers OOM or warning messages. Also, the alloc interface now understands __GFP_NORETRY and __GFP_NOWARN. This is to allow avoiding OOMs from userland triggered actions like bpf map creation. Also added cond_resched() in alloc loop. - perpcu allocation now can be interrupted by kill sigs to avoid deadlocking OOM killer. - Added Dennis Zhou as a co-maintainer. He has rewritten the area map allocator, understands most of the code base and has been responsive for all bug reports" * 'for-4.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu_ref: Update doc to dissuade users from depending on internal RCU grace periods mm: Allow to kill tasks doing pcpu_alloc() and waiting for pcpu_balance_workfn() percpu: include linux/sched.h for cond_resched() percpu: add a schedule point in pcpu_balance_workfn() percpu: allow select gfp to be passed to underlying allocators percpu: add __GFP_NORETRY semantics to the percpu balancing path percpu: match chunk allocator declarations with definitions percpu: add Dennis Zhou as a percpu co-maintainer -
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libataLinus Torvalds authored
Pull libata fixes from Tejun Heo: "I sat on them too long and it's quite a few this late, but nothing has a wide blast area. The changes are... - Fix corner cases in SG command handling. - Recent introduction of default powersaving mode config option exposed several devices with broken powersaving behaviors. A number of patches to update the blacklist accordingly. - Fix a kernel panic on SAS hotplug. - Other misc and device specific updates" * 'for-4.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata: Modify quirks for MX100 to limit NCQ_TRIM quirk to MU01 version libata: Make Crucial BX100 500GB LPM quirk apply to all firmware versions libata: Apply NOLPM quirk to Crucial M500 480 and 960GB SSDs libata: Enable queued TRIM for Samsung SSD 860 PCI: Add function 1 DMA alias quirk for Highpoint RocketRAID 644L ahci: Add PCI-id for the Highpoint Rocketraid 644L card ata: do not schedule hot plug if it is a sas host libata: disable LPM for Crucial BX100 SSD 500GB drive libata: Apply NOLPM quirk to Crucial MX100 512GB SSDs libata: update documentation for sysfs interfaces ata: sata_rcar: Remove unused variable in sata_rcar_init_controller() libata: transport: cleanup documentation of sysfs interface sata_rcar: Reset SATA PHY when Salvator-X board resumes libata: don't try to pass through NCQ commands to non-NCQ devices libata: remove WARN() for DMA or PIO command without data libata: fix length validation of ATAPI-relayed SCSI commands ata: libahci: fix comment indentation ahci: Add check for device presence (PCIe hot unplug) in ahci_stop_engine() libata: Fix compile warning with ATA_DEBUG enabled -
Jeff Layton authored
We had some reports of panics in nfsd4_lm_notify, and that showed a nfs4_lockowner that had outlived its so_client. Ensure that we walk any leftover lockowners after tearing down all of the stateids, and remove any blocked locks that they hold. With this change, we also don't need to walk the nbl_lru on nfsd_net shutdown, as that will happen naturally when we tear down the clients. Fixes: 76d348fa (nfsd: have nfsd4_lock use blocking locks for v4.1+ locks) Reported-by:
Frank Sorenson <fsorenso@redhat.com> Signed-off-by:
Jeff Layton <jlayton@redhat.com> Cc: stable@vger.kernel.org # 4.9 Signed-off-by:
J. Bruce Fields <bfields@redhat.com>
-
Leon Romanovsky authored
XRCD object is not implemented in the restrack, so lets remove it. Fixes: 02d8883f ("RDMA/restrack: Add general infrastructure to track RDMA resources") Signed-off-by:
-
Leon Romanovsky authored
The error in ucma_create_id() left ctx in the list of contexts belong to ucma file descriptor. The attempt to close this file descriptor causes to use-after-free accesses while iterating over such list. Fixes: 75216638 ("RDMA/cma: Export rdma cm interface to userspace") Reported-by: <syzbot+dcfd344365a56fbebd0f@syzkaller.appspotmail.com> Signed-off-by:
Sean Hefty <sean.hefty@intel.com> Signed-off-by:
-
Tejun Heo authored
percpu_ref internally uses sched-RCU to implement the percpu -> atomic mode switching and the documentation suggested that this could be depended upon. This doesn't seem like a good idea. * percpu_ref uses sched-RCU which has different grace periods regular RCU. Users may combine percpu_ref with regular RCU usage and incorrectly believe that regular RCU grace periods are performed by percpu_ref. This can lead to, for example, use-after-free due to premature freeing. * percpu_ref has a grace period when switching from percpu to atomic mode. It doesn't have one between the last put and release. This distinction is subtle and can lead to surprising bugs. * percpu_ref allows starting in and switching to atomic mode manually for debugging and other purposes. This means that there may not be any grace periods from kill to release. This patch makes it clear that the grace periods are percpu_ref's internal implementation detail and can't be depended upon by the users. Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Kirill Tkhai authored
In case of memory deficit and low percpu memory pages, pcpu_balance_workfn() takes pcpu_alloc_mutex for a long time (as it makes memory allocations itself and waits for memory reclaim). If tasks doing pcpu_alloc() are choosen by OOM killer, they can't exit, because they are waiting for the mutex. The patch makes pcpu_alloc() to care about killing signal and use mutex_lock_killable(), when it's allowed by GFP flags. This guarantees, a task does not miss SIGKILL from OOM killer. Signed-off-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by:
-
Tejun Heo authored
microblaze build broke due to missing declaration of the cond_resched() invocation added recently. Let's include linux/sched.h explicitly. Signed-off-by:
kbuild test robot <fengguang.wu@intel.com>
-
Boris Brezillon authored
CM_PLLx and A2W_XOSC_CTRL registers are accessed by different clock handlers and must be accessed with ->regs_lock held. Update the sections where this protection is missing. Fixes: 41691b88 ("clk: bcm2835: Add support for programming the audio domain clocks") Cc: <stable@vger.kernel.org> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
Stephen Boyd <sboyd@kernel.org>
-
Boris Brezillon authored
ana->maskX values are already '~'-ed in bcm2835_pll_set_rate(). Remove the '~' in the definition to fix ANA setup. Note that this commit fixes a long standing bug preventing one from using an HDMI display if it's plugged after the FW has booted Linux. This is because PLLH is used by the HDMI encoder to generate the pixel clock. Fixes: 41691b88 ("clk: bcm2835: Add support for programming the audio domain clocks") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Hans de Goede authored
When commit 9c7be59f ("libata: Apply NOLPM quirk to Crucial MX100 512GB SSDs") was added it inherited the ATA_HORKAGE_NO_NCQ_TRIM quirk from the existing "Crucial_CT*MX100*" entry, but that entry sets model_rev to "MU01", where as the entry adding the NOLPM quirk sets it to NULL. This means that after this commit we no apply the NO_NCQ_TRIM quirk to all "Crucial_CT512MX100*" SSDs even if they have the fixed "MU02" firmware. This commit splits the "Crucial_CT512MX100*" quirk into 2 quirks, one for the "MU01" firmware and one for all other firmware versions, so that we once again only apply the NO_NCQ_TRIM quirk to the "MU01" firmware version. Fixes: 9c7be59f ("libata: Apply NOLPM quirk to ... MX100 512GB SSDs") Cc: stable@vger.kernel.org Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans de Goede authored
Commit b17e5729 ("libata: disable LPM for Crucial BX100 SSD 500GB drive"), introduced a ATA_HORKAGE_NOLPM quirk for Crucial BX100 500GB SSDs but limited this to the MU02 firmware version, according to: http://www.crucial.com/usa/en/support-ssd-firmware MU02 is the last version, so there are no newer possibly fixed versions and if the MU02 version has broken LPM then the MU01 almost certainly also has broken LPM, so this commit changes the quirk to apply to all firmware versions. Fixes: b17e5729 ("libata: disable LPM for Crucial BX100 SSD 500GB...") Cc: stable@vger.kernel.org Cc: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Hans de Goede authored
There have been reports of the Crucial M500 480GB model not working with LPM set to min_power / med_power_with_dipm level. It has not been tested with medium_power, but that typically has no measurable power-savings. Note the reporters Crucial_CT480M500SSD3 has a firmware version of MU03 and there is a MU05 update available, but that update does not mention any LPM fixes in its changelog, so the quirk matches all firmware versions. In my experience the LPM problems with (older) Crucial SSDs seem to be limited to higher capacity versions of the SSDs (different firmware?), so this commit adds a NOLPM quirk for the 480 and 960GB versions of the M500, to avoid LPM causing issues with these SSDs. Cc: stable@vger.kernel.org Reported-and-tested-by:
Martin Steigerwald <martin@lichtvoll.de> Signed-off-by:
-
Linus Torvalds authored
-
- 18 Mar, 2018 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86/pti updates from Thomas Gleixner: "Another set of melted spectrum updates: - Iron out the last late microcode loading issues by actually checking whether new microcode is present and preventing the CPU synchronization to run into a timeout induced hang. - Remove Skylake C2 from the microcode blacklist according to the latest Intel documentation - Fix the VM86 POPF emulation which traps if VIP is set, but VIF is not. Enhance the selftests to catch that kind of issue - Annotate indirect calls/jumps for objtool on 32bit. This is not a functional issue, but for consistency sake its the right thing to do. - Fix a jump label build warning observed on SPARC64 which uses 32bit storage for the code location which is casted to 64 bit pointer w/o extending it to 64bit first. - Add two new cpufeature bits. Not really an urgent issue, but provides them for both x86 and x86/kvm work. No impact on the current kernel" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode: Fix CPU synchronization routine x86/microcode: Attempt late loading only when new microcode is present x86/speculation: Remove Skylake C2 from Speculation Control microcode blacklist jump_label: Fix sparc64 warning x86/speculation, objtool: Annotate indirect calls/jumps for objtool on 32-bit kernels x86/vm86/32: Fix POPF emulation selftests/x86/entry_from_vm86: Add test cases for POPF selftests/x86/entry_from_vm86: Exit with 1 if we fail x86/cpufeatures: Add Intel PCONFIG cpufeature x86/cpufeatures: Add Intel Total Memory Encryption cpufeature -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Thomas Gleixner: "A single fix for vmalloc_fault() which uses p*d_huge() unconditionally whether CONFIG_HUGETLBFS is set or not. In case of CONFIG_HUGETLBFS=n this results in a crash as p*d_huge() returns 0 in that case" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Fix vmalloc_fault to use pXd_large
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "Three fixes for irq chip drivers: - Make sure the allocations in the GIC-V3 ITS driver are large enough to accomodate the interrupt space - Fix a misplaced __iomem annotation which causes a splat of 26 sparse warnings - Remove an unused function in the IMX GPCV2 driver which causes build warnings" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/irq-imx-gpcv2: Remove unused function irqchip/gic-v3-its: Ensure nr_ites >= nr_lpis irqchip/gic-v3-its: Fix misplaced __iomem annotations -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull EFI fix from Thomas Gleixner: "A single fix to prevent partially initialized pointers in mixed mode (64bit kernel on 32bit UEFI)" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/libstub/tpm: Initialize pointer variables to zero for mixed mode
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "PPC: - fix bug leading to lost IPIs and smp_call_function_many() lockups on POWER9 ARM: - locking fix - reset fix - GICv2 multi-source SGI injection fix - GICv2-on-v3 MMIO synchronization fix - make the console less verbose. x86: - fix device passthrough on AMD SME" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: Fix device passthrough when SME is active kvm: arm/arm64: vgic-v3: Tighten synchronization for guests using v2 on v3 KVM: arm/arm64: vgic: Don't populate multiple LRs with the same vintid KVM: arm/arm64: Reduce verbosity of KVM init log KVM: arm/arm64: Reset mapped IRQs on VM reset KVM: arm/arm64: Avoid vcpu_load for other vcpu ioctls than KVM_RUN KVM: arm/arm64: vgic: Add missing irq_lock to vgic_mmio_read_pending KVM: PPC: Book3S HV: Fix trap number return from __kvmppc_vcore_entry
-
- 17 Mar, 2018 1 commit
-
-
John David Anglin authored
Just when I had decided that flush_cache_range() was always called with a valid context, Helge reported two cases where the "BUG_ON(!vma->vm_mm->context);" was hit on the phantom buildd: kernel BUG at /mnt/sdb6/linux/linux-4.15.4/arch/parisc/kernel/cache.c:587! CPU: 1 PID: 3254 Comm: kworker/1:2 Tainted: G D 4.15.0-1-parisc64-smp #1 Debian 4.15.4-1+b1 Workqueue: events free_ioctx IAOQ[0]: flush_cache_range+0x164/0x168 IAOQ[1]: flush_cache_page+0x0/0x1c8 RP(r2): unmap_page_range+0xae8/0xb88 Backtrace: [<00000000404a6980>] unmap_page_range+0xae8/0xb88 [<00000000404a6ae0>] unmap_single_vma+0xc0/0x188 [<00000000404a6cdc>] zap_page_range_single+0x134/0x1f8 [<00000000404a702c>] unmap_mapping_range+0x1cc/0x208 [<0000000040461518>] truncate_pagecache+0x98/0x108 [<0000000040461624>] truncate_setsize+0x9c/0xb8 [<00000000405d7f30>] put_aio_ring_file+0x80/0x100 [<00000000405d803c>] aio_free_ring+0x8c/0x290 [<00000000405d82c0>] free_ioctx+0x80/0x180 [<0000000040284e6c>] process_one_work+0x21c/0x668 [<00000000402854c4>] worker_thread+0x20c/0x778 [<0000000040291d44>] kthread+0x2d4/0x2e0 [<0000000040204020>] end_fault_vector+0x20/0xc0 This indicates that we need to handle the no context case in flush_cache_range() as we do in flush_cache_mm(). In thinking about this, I realized that we don't need to flush the TLB when there is no context. So, I added context checks to the large flush cases in flush_cache_mm() and flush_cache_range(). The large flush case occurs frequently in flush_cache_mm() and the change should improve fork performance. The v2 version of this change removes the BUG_ON from flush_cache_page() by skipping the TLB flush when there is no context. I also added code to flush the TLB in flush_cache_mm() and flush_cache_range() when we have a context that's not current. Now all three routines handle TLB flushes in a similar manner. Signed-off-by:
John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # 4.9+ Signed-off-by:
Helge Deller <deller@gmx.de>
-
- 16 Mar, 2018 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: "There's an important revert in this pull request that needs to go to stable as it causes a corruption on big endian machines. The other fix is for FIEMAP incorrectly reporting shared extents before a sync and one fix for a crash in raid56. So far we got only one report about the BE corruption, the stable kernels were out for like a week, so hopefully the scope of the damage is low" * tag 'for-4.16-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Revert "btrfs: use proper endianness accessors for super_copy" btrfs: add missing initialization in btrfs_check_shared btrfs: Fix NULL pointer exception in find_bio_stripe
-
git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds authored
Pull microblaze fixes from Michal Simek: - Use NO_BOOTMEM to fix boot issue - Fix opt lib endian dependencies * tag 'microblaze-4.16-rc6' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: switch to NO_BOOTMEM microblaze: remove unused alloc_maybe_bootmem microblaze: Setup dependencies for ASM optimized lib functions
-
Borislav Petkov authored
Emanuel reported an issue with a hang during microcode update because my dumb idea to use one atomic synchronization variable for both rendezvous - before and after update - was simply bollocks: microcode: microcode_reload_late: late_cpus: 4 microcode: __reload_late: cpu 2 entered microcode: __reload_late: cpu 1 entered microcode: __reload_late: cpu 3 entered microcode: __reload_late: cpu 0 entered microcode: __reload_late: cpu 1 left microcode: Timeout while waiting for CPUs rendezvous, remaining: 1 CPU1 above would finish, leave and the others will still spin waiting for it to join. So do two synchronization atomics instead, which makes the code a lot more straightforward. Also, since the update is serialized and it also takes quite some time per microcode engine, increase the exit timeout by the number of CPUs on the system. That's ok because the moment all CPUs are done, that timeout will be cut short. Furthermore, panic when some of the CPUs timeout when returning from a microcode update: we can't allow a system with not all cores updated. Also, as an optimization, do not do the exit sync if microcode wasn't updated. Reported-by:
Emanuel Czirai <xftroxgpx@protonmail.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Ashok Raj <ashok.raj@intel.com> Tested-by:
Tom Lendacky <thomas.lendacky@amd.com> Link: https://lkml.kernel.org/r/20180314183615.17629-2-bp@alien8.de
-
Borislav Petkov authored
Return UCODE_NEW from the scanning functions to denote that new microcode was found and only then attempt the expensive synchronization dance. Reported-by:
-
