- 24 Oct, 2010 40 commits
-
-
Joerg Roedel authored
This function need to be able to load the pdptrs from any mmu context currently in use. So change this function to take an kvm_mmu parameter to fit these needs. As a side effect this patch also moves the cached pdptrs from vcpu_arch into the kvm_mmu struct. Signed-off-by:
Joerg Roedel <joerg.roedel@amd.com> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Joerg Roedel authored
KVM currently ignores fetch faults in the instruction emulator. With nested-npt we could have such faults. This patch adds the code to handle these. Signed-off-by:
-
Joerg Roedel authored
This patch implements logic to make sure that either a page-fault/page-fault-vmexit or a nested-page-fault-vmexit is propagated back to the guest. Signed-off-by:
-
Joerg Roedel authored
This patch introduces the init_kvm_nested_mmu() function which is used to re-initialize the nested mmu when the l2 guest changes its paging mode. Signed-off-by:
-
Joerg Roedel authored
This patch introduces the kvm_read_guest_page_x86 function which reads from the physical memory of the guest. If the guest is running in guest-mode itself with nested paging enabled it will read from the guest's guest physical memory instead. The patch also changes changes the code to use this function where it is necessary. Signed-off-by:
-
Joerg Roedel authored
This patch uses kvm_read_guest_page_tdp to make the walk_addr_generic functions suitable for two-level page table walking. Signed-off-by:
-
Joerg Roedel authored
This patch adds a function which can read from the guests physical memory or from the guest's guest physical memory. This will be used in the two-dimensional page table walker. Signed-off-by:
-
Joerg Roedel authored
This patch adds the functions to do a nested l2_gva to l1_gpa page table walk. Signed-off-by:
-
Joerg Roedel authored
This patch introduces the walk_mmu pointer which points to the mmu-context currently used for gva_to_gpa translations. Signed-off-by:
-
Joerg Roedel authored
This patch introduces a mmu-callback to translate gpa addresses in the walk_addr code. This is later used to translate l2_gpa addresses into l1_gpa addresses. Signed-off-by:
-
Joerg Roedel authored
This is the first patch in the series towards a generic walk_addr implementation which could walk two-dimensional page tables in the end. In this first step the walk_addr function is renamed into walk_addr_generic which takes a mmu context as an additional parameter. Signed-off-by:
-
Joerg Roedel authored
This patch introduces a struct with two new fields in vcpu_arch for x86: * fault.address * fault.error_code This will be used to correctly propagate page faults back into the guest when we could have either an ordinary page fault or a nested page fault. In the case of a nested page fault the fault-address is different from the original address that should be walked. So we need to keep track about the real fault-address. Signed-off-by:
-
Joerg Roedel authored
This patch changes is_rsvd_bits_set() function prototype to take only a kvm_mmu context instead of a full vcpu. Signed-off-by:
-
Joerg Roedel authored
Some logic of the init_kvm_softmmu function is required to build the Nested Nested Paging context. So factor the required logic into a seperate function and export it. Also make the whole init path suitable for more than one mmu context. Signed-off-by:
-
Joerg Roedel authored
This patch introduces an inject_page_fault function pointer into struct kvm_mmu which will be used to inject a page fault. This will be used later when Nested Nested Paging is implemented. Signed-off-by:
-
Joerg Roedel authored
This function pointer in the MMU context is required to implement Nested Nested Paging. Signed-off-by:
-
Joerg Roedel authored
This patch introduces a special set_tdp_cr3 function pointer in kvm_x86_ops which is only used for tpd enabled mmu contexts. This allows to remove some hacks from svm code. Signed-off-by:
-
Joerg Roedel authored
This is necessary to implement Nested Nested Paging. As a side effect this allows some cleanups in the SVM nested paging code. Signed-off-by:
-
Joerg Roedel authored
This patch changes the tdp_enabled flag from its global meaning to the mmu-context and renames it to direct_map there. This is necessary for Nested SVM with emulation of Nested Paging where we need an extra MMU context to shadow the Nested Nested Page Table. Signed-off-by:
-
Joerg Roedel authored
The walk_addr function checks for !is_long_mode in its 64 bit version. But what is meant here is a check for pae paging. Change the condition to really check for pae paging so that it also works with nested nested paging. Signed-off-by:
-
Jes Sorensen authored
Some operating systems store data about the host processor at the time of installation, and when booted on a more uptodate cpu tries to read MSR_EBC_FREQUENCY_ID. This has been found with XP. Signed-off-by:
Jes Sorensen <Jes.Sorensen@redhat.com> Reviewed-by:
Juan Quintela <quintela@redhat.com> Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com>
-
Jes Sorensen authored
Signed-off-by:
-
Roedel, Joerg authored
This patch changes the rip handling in the vmrun emulation path from using next_rip to the generic kvm register access functions. Signed-off-by:
-
Joerg Roedel authored
This patch implements restoring of the correct rip, rsp, and rax after the svm emulation in KVM injected a selective_cr0 write intercept into the guest hypervisor. The problem was that the vmexit is emulated in the instruction emulation which later commits the registers right after the write-cr0 instruction. So the l1 guest will continue to run with the l2 rip, rsp and rax resulting in unpredictable behavior. This patch is not the final word, it is just an easy patch to fix the issue. The real fix will be done when the instruction emulator is made aware of nested virtualization. Until this is done this patch fixes the issue and provides an easy way to fix this in -stable too. Cc: stable@kernel.org Signed-off-by:
-
Joerg Roedel authored
This patch fixes 32 bit legacy paging with NPT enabled. The mmu_check_root call on the top-level of the loop causes root_gfn to take values (in the tdp_enabled path) which are outside of guest memory. So the mmu_check_root call fails at some point in the loop interation causing the guest to tiple-fault. This patch changes the mmu_check_root calls to the places where they are really necessary. As a side-effect it introduces a check for the root of a pae page table too. Signed-off-by:
-
Alexander Graf authored
We have to protect the include for linux/of.h by __KERNEL__ so it doesn't accidently get referenced outside. This patch fixes this and makes the tree compile again. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Alexander Graf authored
This documents how to detect additional features inside the magic page when a guest maps it. Signed-off-by: -
Alexander Graf authored
The e500_tlb.c file didn't compile for me due to the following error: arch/powerpc/kvm/e500_tlb.c: In function ‘kvmppc_e500_shadow_map’: arch/powerpc/kvm/e500_tlb.c:300: error: format ‘%lx’ expects type ‘long unsigned int’, but argument 2 has type ‘gfn_t’ So let's explicitly cast the argument to make printk happy. Signed-off-by: -
Kyle Moffett authored
The kvmppc_e500_stlbe_invalidate() function was trying to pass too many parameters to trace_kvm_stlb_inval(). This appears to be a bad copy-paste from a call to trace_kvm_stlb_write(). Signed-off-by:
Kyle Moffett <Kyle.D.Moffett@boeing.com> Signed-off-by:
-
Alexander Graf authored
This adds some documentation for the KVM_INTERRUPT special cases that PowerPC now implements. Signed-off-by: -
Alexander Graf authored
BookE also wants to support level based interrupts, so let's implement all the necessary logic there. We need to trick a bit here because the irqprios are 1:1 assigned to architecture defined values. But since there is some space left there, we can just pick a random one and move it later on - it's internal anyways. Signed-off-by: -
Alexander Graf authored
Now that we have all the level interrupt magic in place, let's expose the capability to user space, so it can make use of it! Signed-off-by: -
Alexander Graf authored
The current interrupt logic is just completely broken. We get a notification from user space, telling us that an interrupt is there. But then user space expects us that we just acknowledge an interrupt once we deliver it to the guest. This is not how real hardware works though. On real hardware, the interrupt controller pulls the external interrupt line until it gets notified that the interrupt was received. So in reality we have two events: pulling and letting go of the interrupt line. To maintain backwards compatibility, I added a new request for the pulling part. The letting go part was implemented earlier already. With this in place, we can now finally start guests that do not randomly stall and stop to work at random times. This patch implements above logic for Book3S. Signed-off-by: -
Alexander Graf authored
Before I incorrectly enabled napping also for BookE, which would result in needless dcache flushes. Since we only need to force enable napping on Book3s_64 because it doesn't go into MSR_POW otherwise, we can just #ifdef that code to this particular platform. Reported-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
-
Hollis Blanchard authored
Match only the first part of cur_cpu_spec->platform. 440GP (the first 440 processor) is identified by the string "ppc440gp", while all later 440 processors use simply "ppc440". Signed-off-by:
Hollis Blanchard <hollis_blanchard@mentor.com> Signed-off-by:
-
Hollis Blanchard authored
Missing local variable. Signed-off-by:
-
Hollis Blanchard authored
Developers can now tell at a glace the exact type of the premature interrupt, instead of just knowing that there was some premature interrupt. Signed-off-by:
-
Alexander Graf authored
On Book3S a mtmsr with the MSR_POW bit set indicates that the OS is in idle and only needs to be waked up on the next interrupt. Now, unfortunately we let that bit slip into the stored MSR value which is not what the real CPU does, so that we ended up executing code like this: r = mfmsr(); /* r containts MSR_POW */ mtmsr(r | MSR_EE); This obviously breaks, as we're going into idle mode in code sections that don't expect to be idling. This patch masks MSR_POW out of the stored MSR value on wakeup, making guests happy again. Signed-off-by: -
Alexander Graf authored
Up until now we were doing segment mappings wrong on Book3s_32. For Book3s_64 we were using a trick where we know that a single mmu_context gives us 16 bits of context ids. The mm system on Book3s_32 instead uses a clever algorithm to distribute VSIDs across the available range, so a context id really only gives us 16 available VSIDs. To keep at least a few guest processes in the SID shadow, let's map a number of contexts that we can use as VSID pool. This makes the code be actually correct and shouldn't hurt performance too much. Signed-off-by: -
Alexander Graf authored
There are some heuristics in the PPC power management code that try to find out if the particular hardware we're running on supports proper power management or just hangs the machine when going into nap mode. Since we know that KVM is safe with nap, let's force enable it in the PV code once we're certain that we are on a KVM VM. Signed-off-by:
-
