Merge tag 'renesas-dt2-for-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Merge "Second Round of Renesas ARM Based SoC DT Updates for v4.2" from Simon Horman:

* Describe DMA for the serial ports of R-Car Gen2 SoCs
* Add MMCIF max-frequency to R-Car Gen2 SoCs
* Use "nor-jedec" instead of "jedec,spi-nor"

* tag 'renesas-dt2-for-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: r8a7790 dtsi: Describe DMA for the serial ports
  ARM: shmobile: r8a7791 dtsi: Describe DMA for the serial ports
  ARM: shmobile: r8a7794 dtsi: Describe DMA for the serial ports
  ARM: shmobile: r8a7791: add MMCIF max-frequency
  ARM: shmobile: r8a7790: add MMCIF max-frequency
  ARM: shmobile: bockw dts: Replace "nor-jedec" by "jedec,spi-nor"
  ARM: shmobile: henninger dts: Replace "nor-jedec" by "jedec,spi-nor"
  ARM: shmobile: bockw-reference dts: Replace "nor-jedec" by "jedec,spi-nor"
  ARM: shmobile: koelsch dts: Replace "nor-jedec" by "jedec,spi-nor"
  ARM: shmobile: lager dts: Replace "nor-jedec" by "jedec,spi-nor"

Merge "arm: Xilinx Zynq dt patches for v4.2" from Michal Simek:

- Fix aliases and stdout properties
- Document current TTC binding
- Add Ceva to prefixes
- Use new compatible string for MACB

* tag 'zynq-dt-for-4.2' of https://github.com/Xilinx/linux-xlnx:
  ARM: zynq: DT: Use the zynq binding with macb
  of: Add vendor prefix for Ceva
  PCI: xilinx: Trivial fix in DT example
  devicetree: cadence_ttc: Document binding for timer width
  ARM: dts: zynq: Fix stdout-path and bootargs
  ARM: dts: zynq: Add missing alias node for zybo and parallella

Merge "ARM: mediatek: dts updates for v4.2" from Matthias Brugger:
- dts: add pinctrl/GPIO/EINT to mt8135
- dts: fix uart address for mt8127

* tag 'v4.1-next-dts' of https://github.com/mbgg/linux-mediatek:
  ARM: dts: mt8127: correct uart instance address
  ARM: dts: mt8135: Add pinctrl/GPIO/EINT node for mt8135.

Merge tag 'qcom-dt-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into next/dt

Merge "Qualcomm ARM Based Device Tree Updates for v4.2" from Kumar Gala:

* Added support for regulators, USB Host & OTG, SATA, and i2c
  controllers on APQ8064 based platforms
* Added PM8841/PM8941/PMA8084 device nodes
* Added PMU support on MSM8660

* tag 'qcom-dt-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom:
  ARM: dts: qcom: Add msm8660 PMU node
  ARM: dts: qcom: Add PMA8084 functions device nodes
  ARM: dts: qcom: Add PM8941 functions device nodes
  ARM: dts: qcom: Add PM8841 functions device nodes
  ARM: dts: qcom: apq8064 - add i2c3 node for panel.
  ARM: dts: qcom: apq8064 - Move i2c1 pinctrl to apq8064.dtsi
  ARM: dts: qcom: apq8064-ifc6410 - Add DT alias for serial port
  ARM: dts: qcom: apq8064 - Add USB OTG support for CM QS-600
  ARM: dts: qcom: apq8064 - Add usb host support to CM QS-600
  ARM: dts: qcom: apq8064-cm-qs600 - Add basic regulators
  ARM: dts: qcom: apq8064 - Add SATA controller support
  ARM: dts: qcom: apq8064 - Add USB OTG support
  ARM: dts: qcom: apq8064 - Add usb host support.
  ARM: dts: qcom: apq8064-ifc6410 - Add basic regulators
  ARM: dts: qcom: apq8064 - add RPM regulators support

Merge tag 'omap-for-v4.2/dt-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Merge "Device tree related changes for omaps" from Tony Lindgren:

- Configure MMC data lines 4..8 for 1.8V IO on boards that
  are using them as GPIOs instead of MMC data lines

- Add support for Baltos IR5221

- Add device tree support for LogicPD Torpedo devkit

- Add 3717 core pinctrl region

- Add gta04 1w and GSM audio support

- Add wilink and ov2659 support for am437x-gp-evm

- Add am335x-evm bluetooth and mmc3 support

- Enable omap5-uevm uart wakeup interrupt

- Enable I2C2 on BeagleBone as it's used for the capes

- Use defines for LDP GPIO keys

* tag 'omap-for-v4.2/dt-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: am335x-evm: add mmc3 and wlan definitions to dts
  ARM: dts: Enable SDIO card interrupt for 37xx-evm
  ARM: dts: Fix ldp gpio keys to use defines
  ARM: dts: Beaglebone i2c definitions
  ARM: dts: am437x-gp-evm: add DT nodes for ov2659 sensor
  ARM: dts: add DTS for Baltos IR5221
  ARM: dts: omap5-uevm: Add Uart wakeup interrupt
  ARM: dts: omap3-gta04: Add GSM audio support
  ARM: dts: am335x-evm: add bluetooth support
  ARM: dts: am437x-gp-evm: add wilink8 support
  ARM: dts: omap3-gta04: Add hdqw1 support
  ARM: dts: add core2 padconf region for am3517
  ARM: dts: Add minimal support for LogicPD Torpedo DM3730 devkit
  ARM: OMAP3: Add support for configuring MMC pins as GPIO pins

Use the new zynq binding for macb ethernet, since it will disable half
duplex gigabit like the Zynq TRM says to do. Also allow the compatible
cadence gem binding that won't disable half duplex but works otherwise.
Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com>
Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Good to have it properly describe for c&p cases.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>

Modern TTC implementations can extend the timer width to 32 bit. This
feature is not self identifying so the driver needs to be made aware
via device tree.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

parallella - Remove linux,stdout-path.
Use stdout-path to identify kernel console
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>

Add missing alias node.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>

Add DMA properties to all SCIF, SCIFA, SCIFB, and HSCIF device nodes.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Add DMA properties to all SCIF, SCIFA, SCIFB, and HSCIF device nodes.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Add DMA properties to all SCIF, SCIFA, SCIFB, and HSCIF device nodes.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Merge tag 'at91-dt3' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/dt

Merge "Third batch of DT changes for 4.2" from Nicolas Ferre:

- USB host clock refine following changes in drivers
- one little fix for usart pinctrl

* tag 'at91-dt3' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: at91/dt: remove useless usb clock
  ARM: at91/dt: remove useless uhpck clock references from ehci defintions
  USB: atmel: update DT bindings documentation
  ARM: at91/dt: at91sam9x5: fix usart1 sck pin definition

Merge tag 'v4.2-rockchip-dts2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Merge "ARM: rockchip: dts relicensing for 4.2" from Heiko Stuebner:

Relicense all Rockchip-related devicetree files to the GPL2/X11 combo.
I've now finally aquired necessary Acks from all contributors.

* tag 'v4.2-rockchip-dts2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: relicense rk3288-evb* under GPLv2/X11
  ARM: dts: rockchip: relicense rk3288.dtsi under GPLv2/X11
  ARM: dts: rockchip: relicense rk3188-radxarock.dts under GPLv2/X11
  ARM: dts: rockchip: relicense rk3066a-bqcurie2.dts under GPLv2/X11
  ARM: dts: rockchip: relicense rk3288-thermal.dtsi under GPLv2/X11
  ARM: dts: rockchip: relicense rk3188.dtsi under GPLv2/X11
  ARM: dts: rockchip: relicense rk3066a.dtsi under GPLv2/X11
  ARM: dts: rockchip: relicense rk3xxx.dtsi under GPLv2/X11

The ohci driver now calls clk_set_rate on the uhpck clock (which forwards
set_rate requests to its parent: the usb clock).
Remove useless references to usb clocks from ohci definitions.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

The uhpck is useless for High-Speed communications, remove the reference
to this clock in all ehci definitions.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Add documentation for the missing clocks, clock-names, reg and interrupts
properties.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

This includes the wlan regulator, pinmux, DMA
and wlcore bindings.
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Eyal Reizer <eyalr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Cfr. commit 8947e396 ('Documentation: dt: mtd: replace
"nor-jedec" binding with "jedec, spi-nor"')
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Cfr. commit 8947e396 ('Documentation: dt: mtd: replace
"nor-jedec" binding with "jedec, spi-nor"')
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Cfr. commit 8947e396 ('Documentation: dt: mtd: replace
"nor-jedec" binding with "jedec, spi-nor"')
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Cfr. commit 8947e396 ('Documentation: dt: mtd: replace
"nor-jedec" binding with "jedec, spi-nor"')
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Cfr. commit 8947e396 ('Documentation: dt: mtd: replace
"nor-jedec" binding with "jedec, spi-nor"')
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

This allows to use the MMC1 slot with SDIO cards.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Fix ldp gpio keys to use defines.
Signed-off-by: Tony Lindgren <tony@atomide.com>

This adds an initial device tree to run Linux on the Cortex-M4 on
the Vybrid based Colibri VF61 module.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge "Berlin DT changes for v4.2" from Sebastian Hesselbarth:
- GPLv2/X11 dual licensing
- Mark Berlin DT bindings as unstable
- Updated binding documentation for reworked
  chip/system ctrl nodes

* tag 'berlin-dt-4.2-1' of git://git.infradead.org/users/hesselba/linux-berlin:
  Documentation: bindings: update the berlin chip and system ctrl doc
  Documentation: bindings: move the Berlin clock documentation
  Documentation: bindings: move the Berlin pinctrl documentation
  Documentation: bindings: move the Berlin reset documentation
  Documentation: bindings: update the Berlin controllers documentation
  Documentation: bindings: berlin: consider our dt bindings as unstable
  ARM: dts: berlin: relicense the BG2CD Google Chromecast dts under GPLv2/X11
  ARM: dts: berlin: relicense the berlin2cd dtsi under GPLv2/X11
  ARM: dts: berlin: relicense the BG2 Sony NSZ-GS7 dts under GPLv2/X11
  ARM: dts: berlin: relicense the berlin2 dtsi under GPLv2/X11
  ARM: dts: berlin: relicense the BG2Q Marvell DMP dts under GPLv2/X11
  ARM: dts: berlin: relicense the berlin2q dtsi under GPLv2/X11

The beaglebone family of boards contain two I2C busses enabled.
The first one with a baseboard identification EEPROM and a
cape I2C bus.
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

this patch does the following:
1: adds DT node for fixed oscillator.
2: adds DT node entries for ov2659 sensor
3: adds remote-endpoint entry for VPFE.
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This device is an industrial PC based on
AM335x SoC.

[ balbi@ti.com : updated to fit current mainline ]
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

UART3 wakeup takes place with iodaisy chain. enable the wakeup pin.
Reported-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
[tony@atomide.com: tabify uart pins properly while at it]
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add voice audio card which is used for telephony on gta04 board.
gtm601 codec is UMTS modem with pcm interface which get samples from
microphone and provide data from other party side. Use simple audio card
to describe audio card.
Signed-off-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

uart1 is used for connecting to wilink8 bluetooth subsystem.
add the needed muxes and definitions.
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Eyal Reizer <eyalr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

enable mmc3 used for wlan and uart3 used for bluetooth

configure the gpios used for wlan and bluetooth controls

add fixed voltage regulator used for wlan power control
Signed-off-by: Eyal Reizer <eyalr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Enable omap-hdq for battery fuel gauge access.
Signed-off-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

According to the technical reference manual for AM35xx system
controller module (SCM) PADCONFS core registers are divided in two
regions: 0x48002030..0x48002268 and 0x480025d8..0x480025fc.
First region is the same for all omap3 SoC and is described in omap3.dtsi.
The second region is the same as in omap34xx (see omap34xx.dtsi)
and omap35xx. The patch adds missing description for the second region.
This patch was tested on AM3517.
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>