- 04 Dec, 2020 4 commits
-
-
Christophe Leroy authored
In several places, inline assembly uses the "%Un" modifier to enable the use of instruction with update form addressing, but the associated "<>" constraint is missing. As mentioned in previous patch, this fails with gcc 4.9, so "<>" can't be used directly. Use UPD_CONSTR macro everywhere %Un modifier is used. Signed-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by:
Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/62eab5ca595485c192de1765bdac099f633a21d0.1603358942.git.christophe.leroy@csgroup.eu
-
Mathieu Desnoyers authored
The placeholder for instruction selection should use the second argument's operand, which is %1, not %0. This could generate incorrect assembly code if the memory addressing of operand %0 is a different form from that of operand %1. Also remove the %Un placeholder because having %Un placeholders for two operands which are based on the same local var (ptep) doesn't make much sense. By the way, it doesn't change the current behaviour because "<>" constraint is missing for the associated "=m". [chleroy: revised commit log iaw segher's comments and removed %U0] Fixes: 9bf2b5cd ("powerpc: Fixes for CONFIG_PTE_64BIT for SMP support") Cc: <stable@vger.kernel.org> # v2.6.28+ Signed-off-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by:
-
Christophe Leroy authored
Since some time now, printk() adds carriage return, leading to unusable xmon output if there is no udbg backend available: [ 54.288722] sysrq: Entering xmon [ 54.292209] Vector: 0 at [cace3d2c] [ 54.292274] pc: [ 54.292331] c0023650 [ 54.292468] : xmon+0x28/0x58 [ 54.292519] [ 54.292574] lr: [ 54.292630] c0023724 [ 54.292749] : sysrq_handle_xmon+0xa4/0xfc [ 54.292801] [ 54.292867] sp: cace3de8 [ 54.292931] msr: 9032 [ 54.292999] current = 0xc28d0000 [ 54.293072] pid = 377, comm = sh [ 54.293157] Linux version 5.10.0-rc6-s3k-dev-01364-gedf13f0ccd76-dirty (root@po17688vm.idsi0.si.c-s.fr) (powerpc64-linux-gcc (GCC) 10.1.0, GNU ld (GNU Binutils) 2.34) #4211 PREEMPT Fri Dec 4 09:32:11 UTC 2020 [ 54.293287] enter ? for help [ 54.293470] [cace3de8] [ 54.293532] c0023724 [ 54.293654] sysrq_handle_xmon+0xa4/0xfc [ 54.293711] (unreliable) ... [ 54.296002] [ 54.296159] --- Exception: c01 (System Call) at [ 54.296217] 0fd4e784 [ 54.296303] [ 54.296375] SP (7fca6ff0) is in userspace [ 54.296431] mon> [ 54.296484] <no input ...> Use pr_cont() instead. Fixes: 4bcc595c ("printk: reinstate KERN_CONT for printing continuation lines") Cc: stable@vger.kernel.org # v4.9+ Signed-off-by:
-
Alexey Kardashevskiy authored
We execute certain NPU2 setup code (such as mapping an LPID to a device in NPU2) unconditionally if an Nvlink bridge is detected. However this cannot succeed on POWER8NVL machines and errors appear in dmesg. This is harmless as skiboot returns an error and the only place we check it is vfio-pci but that code does not get called on P8+ either. This adds a check if pnv_npu2_xxx helpers are called on a machine with NPU2 which initializes pnv_phb::npu in pnv_npu2_init(); pnv_phb::npu==NULL on POWER8/NVL (Naples). While at this, fix NULL derefencing in pnv_npu_peers_take_ownership/ pnv_npu_peers_release_ownership which occurs when GPUs on mentioned P8s cause EEH which happens if "vfio-pci" disables devices using the D3 power state; the vfio-pci's disable_idle_d3 module parameter controls this and must be set on Naples. The EEH handling clears the entire pnv_ioda_pe struct in pnv_ioda_free_pe() hence the NULL derefencing. We cannot recover from that but at least we stop crashing. Tested on - POWER9 pvr=004e1201, Ubuntu 19.04 host, Ubuntu 18.04 vm, NVIDIA GV100 10de:1db1 driver 418.39 - POWER8 pvr=004c0100, RHEL 7.6 host, Ubuntu 16.10 vm, NVIDIA P100 10de:15f9 driver 396.47 Fixes: 1b785611 ("powerpc/powernv/npu: Add release_ownership hook") Cc: stable@vger.kernel.org # 5.0 Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
-
- 03 Dec, 2020 36 commits
-
-
Ganesh Goudar authored
To check machine check handling, add support to inject slb multihit errors. Co-developed-by:
Mahesh Salgaonkar <mahesh@linux.ibm.com> Signed-off-by:
Ganesh Goudar <ganeshgr@linux.ibm.com> [mpe: Use CONFIG_PPC_BOOK3S_64 to fix compile errors reported by lkp@intel.com] Signed-off-by:
-
Oliver O'Halloran authored
If the platform decides to block enabling the device nothing is printed currently. This can lead to some confusion since the dmesg output will usually print an error with no context e.g. e1000e: probe of 0022:01:00.0 failed with error -22 This shouldn't be spammy since pci_enable_device() already prints a messages when it succeeds. Signed-off-by:
Oliver O'Halloran <oohall@gmail.com> Signed-off-by:
-
Oliver O'Halloran authored
When a passthrough IO adapter is removed from a pseries machine using hash MMU and the XIVE interrupt mode, the POWER hypervisor expects the guest OS to clear all page table entries related to the adapter. If some are still present, the RTAS call which isolates the PCI slot returns error 9001 "valid outstanding translations" and the removal of the IO adapter fails. This is because when the PHBs are scanned, Linux maps automatically the INTx interrupts in the Linux interrupt number space but these are never removed. This problem can be fixed by adding the corresponding unmap operation when the device is removed. There's no pcibios_* hook for the remove case, but the same effect can be achieved using a bus notifier. Because INTx are shared among PHBs (and potentially across the system), this adds tracking of virq to unmap them only when the last user is gone. [aik: added refcounter] Signed-off-by:
Cédric Le Goater <clg@kaod.org> Reviewed-by:
Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by:
-
Daniel Axtens authored
It's sometimes handy to have a config that boots a bit like a system under secure boot (forcing lockdown=integrity, without needing any extra stuff like a command line option). This config file allows that, and also turns on a few assorted security and hardening options for good measure. Suggested-by:
Daniel Axtens <dja@axtens.net> Signed-off-by:
-
Christophe Leroy authored
440/460 variants and 470 variants are not compatible, no need to make code supporting both and using MMU features. Just use CONFIG_PPC_47x to decide what to build. Signed-off-by:
-
Christophe Leroy authored
As stated in platform/44x/Kconfig, CONFIG_PPC_47x is not compatible with 440 and 460 variants. This is confirmed in asm/cache.h as L1_CACHE_SHIFT is different for 47x, meaning a kernel built for 47x will not run correctly on a 440. In cputable, opt out all 440 and 460 variants when CONFIG_PPC_47x is set. Also add a default match dedicated to 470. Signed-off-by:
-
Christophe Leroy authored
CPU_FTR_NODSISRALIGN has not been used since commit 31bfdb03 ("powerpc: Use instruction emulation infrastructure to handle alignment faults") Remove it. Signed-off-by:
-
Christophe Leroy authored
MMU_FTR_PPCAS_ARCH_V2 is defined in cpu_table.h as MMU_FTR_TLBIEL | MMU_FTR_16M_PAGE. MMU_FTR_TLBIEL and MMU_FTR_16M_PAGE are defined in mmu.h MMU_FTR_PPCAS_ARCH_V2 is used only in mmu.h and it is used only once. Remove MMU_FTR_PPCAS_ARCH_V2 and use directly MMU_FTR_TLBIEL | MMU_FTR_16M_PAGE Signed-off-by:
-
Christophe Leroy authored
Only mpc83xx will set MMU_FTR_NEED_DTLB_SW_LRU and its definition is enclosed in #ifdef CONFIG_PPC_83xx. Make MMU_FTR_NEED_DTLB_SW_LRU possible only when CONFIG_PPC_83xx is set. Signed-off-by:
-
Christophe Leroy authored
Since commit 10b35d99 ("[PATCH] powerpc: merged asm/cputable.h"), CPU_FTR_COHERENT_ICACHE has always been defined. Remove the #ifndef CPU_FTR_COHERENT_ICACHE block. Signed-off-by:
-
Christophe Leroy authored
G2_LE has a 603 core, add CPU_FTR_NOEXECUTE. Fixes: 385e89d5 ("powerpc/mm: add exec protection on powerpc 603") Cc: stable@vger.kernel.org Signed-off-by:
-
Christophe Leroy authored
MMU_FTR_TYPE_44x cannot be checked by cpu_has_feature() Use mmu_has_feature() instead Fixes: 23eb7f56 ("powerpc: Convert flush_icache_range & friends to C") Cc: stable@vger.kernel.org Signed-off-by:
-
Christophe Leroy authored
SPRN_VTB and CPU_FTR_ARCH_207S are always defined, no need of an ifdef. Signed-off-by:
-
Christophe Leroy authored
Use SPRN_SPRG_SCRATCH2 as a third scratch register in exception prologs in order to simplify them and avoid data going back and forth from/to CR. Signed-off-by:
-
Christophe Leroy authored
Use SPRN_SPRG_SCRATCH2 as an alternative scratch register in the early part of DSI prolog in order to avoid clobbering SPRN_SPRG_SCRATCH0/1 used by other prologs. The 603 doesn't like a jump from DataLoadTLBMiss to the 10 nops that are now in the beginning of DSI exception as a result of the feature section. To workaround this, add a jump as alternative. It also avoids fetching 10 nops for nothing. Signed-off-by:
-
Christophe Leroy authored
Make code more readable with a clear CONFIG_VMAP_STACK section and a clear non CONFIG_VMAP_STACK section. Signed-off-by:
-
Christophe Leroy authored
On the 603, SDR1 is not used. In order to free SPRN_SPRG2, use SPRN_SDR1 to store the pgdir phys addr. But only some bits of SDR1 can be used (0xffff01ff). As the pgdir is 4k aligned, rotate it by 4 bits to the left. Signed-off-by:
-
Christophe Leroy authored
SPRN_SPRG_PGDIR is there mainly to speedup SW TLB miss handlers for powerpc 603. We need to free SPRN_SPRG2 to reduce the mess with CONFIG_VMAP_STACK. In hash_page(), reading PGDIR from thread_struct will be in the noise performance wise. Signed-off-by:
-
Christophe Leroy authored
An FTR_SECTION_ELSE is in the middle of BEGIN_MMU_FTR_SECTION/ALT_MMU_FTR_SECTION_END_IFSET Change it to MMU_FTR_SECTION_ELSE Signed-off-by:
-
Christophe Leroy authored
We now always map kernel text with BATs. Neither need to preload hash with kernel text addresses nor ensure they are never evicted. This is more or less a revert of commit ee4f2ea4 ("[POWERPC] Fix 32-bit mm operations when not using BATs") Signed-off-by:
-
Christophe Leroy authored
Since commit 2b279c03 ("powerpc/32s: Allow mapping with BATs with DEBUG_PAGEALLOC"), there is no real situation where mapping without BATs is required. In order to simplify memory handling, always map kernel text and rodata with BATs even when "nobats" kernel parameter is set. Also fix the 603 TLB miss exceptions that don't require anymore kernel page table if DEBUG_PAGEALLOC. Signed-off-by:
-
Christophe Lombard authored
Add specific kernel traces which provide information on mmu notifier and on pages range. Signed-off-by:
Christophe Lombard <clombard@linux.vnet.ibm.com> Acked-by:
-
Christophe Lombard authored
Add invalidate_range mmu notifier, when required (ATSD access of MMIO registers is available), to initiate TLB invalidation commands. For the time being, the ATSD0 set of registers is used by default. The pasid and bdf values have to be configured in the Process Element Entry. The PEE must be set up to match the BDF/PASID of the AFU. Signed-off-by:
-
Christophe Lombard authored
To complete the MMIO based mechanism, the fields: PASID, bus, device and function of the Process Element Entry have to be filled. (See OpenCAPI Power Platform Architecture document) Hypervisor Process Element Entry Word 0 1 .... 7 8 ...... 12 13 ..15 16.... 19 20 ........... 31 0 OSL Configuration State (0:31) 1 OSL Configuration State (32:63) 2 PASID | Reserved 3 Bus | Device |Function | Reserved 4 Reserved 5 Reserved 6 .... Signed-off-by: -
Christophe Lombard authored
When a TLB Invalidate is required for the Logical Partition, the following sequence has to be performed: 1. Load MMIO ATSD AVA register with the necessary value, if required. 2. Write the MMIO ATSD launch register to initiate the TLB Invalidate command. 3. Poll the MMIO ATSD status register to determine when the TLB Invalidate has been completed. Signed-off-by:
-
Christophe Lombard authored
Platform specific function to assign a register set to a Logical Partition. The "ibm,mmio-atsd" property, provided by the firmware, contains the 16 base ATSD physical addresses (ATSD0 through ATSD15) of the set of MMIO registers (XTS MMIO ATSDx LPARID/AVA/launch/status register). For the time being, the ATSD0 set of registers is used by default. Signed-off-by:
-
Athira Rajeev authored
PowerISA v3.1 introduces new control bit (PMCCEXT) for restricting access to group B PMU registers in problem state when MMCR0 PMCC=0b00. In problem state and when MMCR0 PMCC=0b00, setting the Monitor Mode Control Register bit 54 (MMCR0 PMCCEXT), will restrict read permission on Group B Performance Monitor Registers (SIER, SIAR, SDAR and MMCR1). When this bit is set to zero, group B registers will be readable. In other platforms (like power9), the older behaviour is retained where group B PMU SPRs are readable. Patch adds support for MMCR0 PMCCEXT bit in power10 by enabling this bit during boot and during the PMU event enable/disable callback functions. Signed-off-by:
Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by:
-
Athira Rajeev authored
Export l2l3 events (PM_L2_ST_MISS and PM_L2_ST) and LLC-prefetches (PM_L3_PF_MISS_L3) via sysfs, and also add these to list of cache_events. Signed-off-by:
-
Athira Rajeev authored
Fix the event code for events: branch-instructions (to PM_BR_FIN), branch-misses (to PM_MPRED_BR_FIN) and cache-misses (to PM_LD_DEMAND_MISS_L1_FIN) for power10 PMU. Update the list of generic events with this modified event code. Signed-off-by:
-
Athira Rajeev authored
There are event code updates for some of the generic events and cache events for power10. Inorder to maintain the current event codes work with DD1 also, create a new array of generic_events, cache_events and pmu_attr_groups with suffix _dd1, example, power10_events_attr_dd1. So that further updates to event codes can be made in the original list, ie, power10_events_attr. Update the power10 pmu init code to pick the dd1 list while registering the power PMU, based on the pvr (Processor Version Register) value. Signed-off-by:
-
Athira Rajeev authored
The PMU group constraints mask for threshold events covers all thresholding bits which includes threshold control value (start/stop), select value as well as thresh_cmp value (MMCRA[9:18]. In power9, thresh_cmp bits were part of the event code. But in case of power10, thresh_cmp bits are not part of event code due to inclusion of MMCR3 bits. Hence thresh_cmp is not valid for group constraints for power10. Fix the PMU group constraints checking for threshold events in power10 by using constraint mask and value for only threshold control and select bits. Fixes: a64e697c ("powerpc/perf: power10 Performance Monitoring support") Signed-off-by:
-
Athira Rajeev authored
In Power9, L2/L3 bus events are always available as a "bank" of 4 events. To obtain the counts for any of the l2/l3 bus events in a given bank, the user will have to program PMC4 with corresponding l2/l3 bus event for that bank. Commit 59029136 ("powerpc/perf: Add constraints for power9 l2/l3 bus events") enforced this rule in Power9. But this is not valid for Power10, since in Power10 Monitor Mode Control Register2 (MMCR2) has bits to configure l2/l3 event bits. Hence remove this PMC4 constraint check from power10. Since the l2/l3 bits in MMCR2 are not per-pmc, patch handles group constrints checks for l2/l3 bits in MMCR2. Fixes: a64e697c ("powerpc/perf: power10 Performance Monitoring support") Signed-off-by:
-
Athira Rajeev authored
power10 uses bit 9 of the raw event code as RADIX_SCOPE_QUAL. This bit is used for enabling the radix process events. Patch fixes the PMU counter support functions to program bit 18 of MMCR1 ( Monitor Mode Control Register1 ) with the RADIX_SCOPE_QUAL bit value. Since this field is not per-pmc, add this to PMU group constraints to make sure events in a group will have same bit value for this field. Use bit 21 as constraint bit field for radix_scope_qual. Patch also updates the power10 raw event encoding layout information, format field and constraints bit layout to include the radix_scope_qual bit. Fixes: a64e697c ("powerpc/perf: power10 Performance Monitoring support") Signed-off-by:
-
Aneesh Kumar K.V authored
If FTR_BOOK3S_KUAP is disabled, kernel will continue to run with the same AMR value with which it was entered. Hence there is a high chance that we can return without restoring the AMR value. This also helps the case when applications are not using the pkey feature. In this case, different applications will have the same AMR values and hence we can avoid restoring AMR in this case too. Also avoid isync() if not really needed. Do the same for IAMR. null-syscall benchmark results: With smap/smep disabled: Without patch: 957.95 ns 2778.17 cycles With patch: 858.38 ns 2489.30 cycles With smap/smep enabled: Without patch: 1017.26 ns 2950.36 cycles With patch: 1021.51 ns 2962.44 cycles Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
-
Aneesh Kumar K.V authored
Don't enable KUEP/KUAP if we support less than or equal to 3 keys. Signed-off-by:
-
Aneesh Kumar K.V authored
Signed-off-by:
Sandipan Das <sandipan@linux.ibm.com> Signed-off-by:
-
