- 27 Jul, 2013 2 commits
-
-
Bu, Yitian authored
commit dbda92d1 upstream. commit 07354eb1 ("locking printk: Annotate logbuf_lock as raw") reintroduced a lock inversion problem which was fixed in commit 0b5e1c52 ("printk: Release console_sem after logbuf_lock"). This happened probably when fixing up patch rejects. Restore the ordering and unlock logbuf_lock before releasing console_sem. Signed-off-by:
ybu <ybu@qti.qualcomm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/E807E903FE6CBE4D95E420FBFCC273B827413C@nasanexd01h.na.qualcomm.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> [bwh: Backported to 3.2: adjust context] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Ben Hutchings authored
The workaround introduced by commit e5195c1f 'r8169: fix 8168evl frame padding.' upstream was incorrect and was entirely replaced in commit b423e9ae 'r8169: fix offloaded tx checksum for small packets.' On the 3.2.y branch, the first commit has effectively been applied twice: the first time by itself, and the second time in commit 3cf40360 which squashed the two upstream commits together. That left us with both the incorrect and the correct workaround in place. Remove the incorrect one. Signed-off-by:
-
- 29 Jun, 2013 28 commits
-
-
Ben Hutchings authored
-
Dave Chiluk authored
commit 698b8223 upstream. 1d2ef590 caused a regression in ncpfs such that directories could no longer be removed. This was because ncp_rmdir checked to see if a dentry could be unhashed before allowing it to be removed. Since 1d2ef590 introduced a change that incremented dentry->d_count causing it to always be greater than 1 unhash would always fail. Thus causing the error path in ncp_rmdir to always be taken. Removing this error path is safe as unhashing is still accomplished by calls to dput from vfs_rmdir. Signed-off-by:
Dave Chiluk <chiluk@canonical.com> Signed-off-by:
Petr Vandrovec <petr@vandrovec.name> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Guillaume Nault authored
[ Upstream commit a6f79d0f ] PPPoL2TP sockets should comply with the standard send*() return values (i.e. return number of bytes sent instead of 0 upon success). Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Guillaume Nault authored
[ Upstream commit 55b92b7a ] Copy user data after PPP framing header. This prevents erasure of the added PPP header and avoids leaking two bytes of uninitialised memory at the end of skb's data buffer. Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 2dc85bf3 ] uaddr->sa_data is exactly of size 14, which is hard-coded here and passed as a size argument to strncpy(). A device name can be of size IFNAMSIZ (== 16), meaning we might leave the destination string unterminated. Thus, use strlcpy() and also sizeof() while we're at it. We need to memset the data area beforehand, since strlcpy does not padd the remaining buffer with zeroes for user space, so that we do not possibly leak anything. Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 1abd165e ] While stress testing sctp sockets, I hit the following panic: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: [<ffffffffa0490c4e>] sctp_endpoint_free+0xe/0x40 [sctp] PGD 7cead067 PUD 7ce76067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: sctp(F) libcrc32c(F) [...] CPU: 7 PID: 2950 Comm: acc Tainted: GF 3.10.0-rc2+ #1 Hardware name: Dell Inc. PowerEdge T410/0H19HD, BIOS 1.6.3 02/01/2011 task: ffff88007ce0e0c0 ti: ffff88007b568000 task.ti: ffff88007b568000 RIP: 0010:[<ffffffffa0490c4e>] [<ffffffffa0490c4e>] sctp_endpoint_free+0xe/0x40 [sctp] RSP: 0018:ffff88007b569e08 EFLAGS: 00010292 RAX: 0000000000000000 RBX: ffff88007db78a00 RCX: dead000000200200 RDX: ffffffffa049fdb0 RSI: ffff8800379baf38 RDI: 0000000000000000 RBP: ffff88007b569e18 R08: ffff88007c230da0 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff880077990d00 R14: 0000000000000084 R15: ffff88007db78a00 FS: 00007fc18ab61700(0000) GS:ffff88007fc60000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000020 CR3: 000000007cf9d000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff88007b569e38 ffff88007db78a00 ffff88007b569e38 ffffffffa049fded ffffffff81abf0c0 ffff88007db78a00 ffff88007b569e58 ffffffff8145b60e 0000000000000000 0000000000000000 ffff88007b569eb8 ffffffff814df36e Call Trace: [<ffffffffa049fded>] sctp_destroy_sock+0x3d/0x80 [sctp] [<ffffffff8145b60e>] sk_common_release+0x1e/0xf0 [<ffffffff814df36e>] inet_create+0x2ae/0x350 [<ffffffff81455a6f>] __sock_create+0x11f/0x240 [<ffffffff81455bf0>] sock_create+0x30/0x40 [<ffffffff8145696c>] SyS_socket+0x4c/0xc0 [<ffffffff815403be>] ? do_page_fault+0xe/0x10 [<ffffffff8153cb32>] ? page_fault+0x22/0x30 [<ffffffff81544e02>] system_call_fastpath+0x16/0x1b Code: 0c c9 c3 66 2e 0f 1f 84 00 00 00 00 00 e8 fb fe ff ff c9 c3 66 0f 1f 84 00 00 00 00 00 55 48 89 e5 53 48 83 ec 08 66 66 66 66 90 <48> 8b 47 20 48 89 fb c6 47 1c 01 c6 40 12 07 e8 9e 68 01 00 48 RIP [<ffffffffa0490c4e>] sctp_endpoint_free+0xe/0x40 [sctp] RSP <ffff88007b569e08> CR2: 0000000000000020 ---[ end trace e0d71ec1108c1dd9 ]--- I did not hit this with the lksctp-tools functional tests, but with a small, multi-threaded test program, that heavily allocates, binds, listens and waits in accept on sctp sockets, and then randomly kills some of them (no need for an actual client in this case to hit this). Then, again, allocating, binding, etc, and then killing child processes. This panic then only occurs when ``echo 1 > /proc/sys/net/sctp/auth_enable'' is set. The cause for that is actually very simple: in sctp_endpoint_init() we enter the path of sctp_auth_init_hmacs(). There, we try to allocate our crypto transforms through crypto_alloc_hash(). In our scenario, it then can happen that crypto_alloc_hash() fails with -EINTR from crypto_larval_wait(), thus we bail out and release the socket via sk_common_release(), sctp_destroy_sock() and hit the NULL pointer dereference as soon as we try to access members in the endpoint during sctp_endpoint_free(), since endpoint at that time is still NULL. Now, if we have that case, we do not need to do any cleanup work and just leave the destruction handler. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
Gao feng authored
[ Upstream commit 534c8779 ] Commit 25fb6ca4 "net IPv6 : Fix broken IPv6 routing table after loopback down-up" forgot to assign rt6_info to the inet6_ifaddr. When disable the net device, the rt6_info which allocated in init_loopback will not be destroied in __ipv6_ifa_notify. This will trigger the waring message below [23527.916091] unregister_netdevice: waiting for tap0 to become free. Usage count = 1 Reported-by:
Arkadiusz Miskiewicz <a.miskiewicz@gmail.com> Signed-off-by:
Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit c87a124a ] Roman Gushchin discovered that udp4_lib_lookup2() was not reloading first item in the rcu protected list, in case the loop was restarted. This produced soft lockups as in https://lkml.org/lkml/2013/4/16/37 rcu_dereference(X)/ACCESS_ONCE(X) seem to not work as intended if X is ptr->field : In some cases, gcc caches the value or ptr->field in a register. Use a barrier() to disallow such caching, as documented in Documentation/atomic_ops.txt line 114 Thanks a lot to Roman for providing analysis and numerous patches. Diagnosed-by:
Roman Gushchin <klamm@yandex-team.ru> Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Boris Zhmurov <zhmurov@yandex-team.ru> Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Andy Lutomirski authored
[ Upstream commits 1be374a0 and a7526eb5 ] MSG_CMSG_COMPAT is (AFAIK) not intended to be part of the API -- it's a hack that steals a bit to indicate to other networking code that a compat entry was used. So don't allow it from a non-compat syscall. This prevents an oops when running this code: int main() { int s; struct sockaddr_in addr; struct msghdr *hdr; char *highpage = mmap((void*)(TASK_SIZE_MAX - 4096), 4096, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS | MAP_FIXED, -1, 0); if (highpage == MAP_FAILED) err(1, "mmap"); s = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP); if (s == -1) err(1, "socket"); addr.sin_family = AF_INET; addr.sin_port = htons(1); addr.sin_addr.s_addr = htonl(INADDR_LOOPBACK); if (connect(s, (struct sockaddr*)&addr, sizeof(addr)) != 0) err(1, "connect"); void *evil = highpage + 4096 - COMPAT_MSGHDR_SIZE; printf("Evil address is %p\n", evil); if (syscall(__NR_sendmmsg, s, evil, 1, MSG_CMSG_COMPAT) < 0) err(1, "sendmmsg"); return 0; } Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit a6222602 ] Daniel Petre reported crashes in icmp_dst_unreach() with following call graph: Daniel found a similar problem mentioned in http://lkml.indiana.edu/hypermail/linux/kernel/1007.0/00961.html And indeed this is the root cause : skb->cb[] contains data fooling IP stack. We must clear IPCB in ip_tunnel_xmit() sooner in case dst_link_failure() is called. Or else skb->cb[] might contain garbage from GSO segmentation layer. A similar fix was tested on linux-3.9, but gre code was refactored in linux-3.10. I'll send patches for stable kernels as well. Many thanks to Daniel for providing reports, patches and testing ! Reported-by:
Daniel Petre <daniel.petre@rcs-rds.ro> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 547669d4 ] commit 3853b584 ("xps: Improvements in TX queue selection") introduced ooo_okay flag, but the condition to set it is slightly wrong. In our traces, we have seen ACK packets being received out of order, and RST packets sent in response. We should test if we have any packets still in host queue. Signed-off-by:
-
Stefan Bader authored
[ Upstream commits e5195c1f and b423e9ae ] Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Acked-by:
Francois Romieu <romieu@fr.zoreil.com> Cc: hayeswang <hayeswang@realtek.com> Signed-off-by:
-
Paul Moore authored
[ Upstream commit 6b21e1b7 ] The net/netlabel/netlabel_domainhash.c:netlbl_domhsh_add() function does not properly validate new domain hash entries resulting in potential problems when an administrator attempts to add an invalid entry. One such problem, as reported by Vlad Halilov, is a kernel BUG (found in netlabel_domainhash.c:netlbl_domhsh_audit_add()) when adding an IPv6 outbound mapping with a CIPSO configuration. This patch corrects this problem by adding the necessary validation code to netlbl_domhsh_add() via the newly created netlbl_domhsh_validate() function. Ideally this patch should also be pushed to the currently active -stable trees. Reported-by:
Vlad Halilov <vlad.halilov@gmail.com> Signed-off-by:
Paul Moore <pmoore@redhat.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 284041ef ] commit 0178b695 ("ipv6: Copy cork options in ip6_append_data") added some code duplication and bad error recovery, leading to potential crash in ip6_cork_release() as kfree() could be called with garbage. use kzalloc() to make sure this wont happen. Signed-off-by:
-
Wei Yongjun authored
[ Upstream commit e5f5e380 ] Add the missing iounmap() before return from gianfar_ptp_probe() in the error handling case. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 54d27fcb ] TCP md5 communications fail [1] for some devices, because sg/crypto code assume page offsets are below PAGE_SIZE. This was discovered using mlx4 driver [2], but I suspect loopback might trigger the same bug now we use order-3 pages in tcp_sendmsg() [1] Failure is giving following messages. huh, entered softirq 3 NET_RX ffffffff806ad230 preempt_count 00000100, exited with 00000101? [2] mlx4 driver uses order-2 pages to allocate RX frags Reported-by:
Matt Schnall <mischnal@google.com> Signed-off-by:
-
Vivek Goyal authored
commit e9986f30 upstream. If a virtio disk is open in guest and a disk resize operation is done, (virsh blockresize), new size is not visible to tools like "fdisk -l". This seems to be happening as we update only part->nr_sects and not bdev->bd_inode size. Call revalidate_disk() which should take care of it. I tested growing disk size of already open disk and it works for me. Signed-off-by:
Vivek Goyal <vgoyal@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Ben Hutchings authored
This reverts commit 39314361, which was commit f05bb0c7 upstream. This has been found to cause GPU hangs when backported to 3.2, though not in mainline. References: http://bugs.launchpad.net/bugs/1140716 Cc: Steve Conklin <sconklin@canonical.com> Cc: Stefan Bader <stefan.bader@canonical.com> Cc: Bradd Figg <brad.figg@canonical.com> Cc: Luis Henriques <luis.henriques@canonical.com> Signed-off-by:
-
Ben Hutchings authored
commit b8cb62f8 upstream. 1. Check for allocation failure 2. Clear the buffer contents, as they may actually be written to flash 3. Don't leak the buffer Compile-tested only. [ Tested successfully on my buggy ASUS machine - Matt ] Signed-off-by:
Matt Fleming <matt.fleming@intel.com>
-
Matthew Garrett authored
commit f8b84043 upstream. This patch reworks the UEFI anti-bricking code, including an effective reversion of cc5a080c and 31ff2f20. It turns out that calling QueryVariableInfo() from boot services results in some firmware implementations jumping to physical addresses even after entering virtual mode, so until we have 1:1 mappings for UEFI runtime space this isn't going to work so well. Reverting these gets us back to the situation where we'd refuse to create variables on some systems because they classify deleted variables as "used" until the firmware triggers a garbage collection run, which they won't do until they reach a lower threshold. This results in it being impossible to install a bootloader, which is unhelpful. Feedback from Samsung indicates that the firmware doesn't need more than 5KB of storage space for its own purposes, so that seems like a reasonable threshold. However, there's still no guarantee that a platform will attempt garbage collection merely because it drops below this threshold. It seems that this is often only triggered if an attempt to write generates a genuine EFI_OUT_OF_RESOURCES error. We can force that by attempting to create a variable larger than the remaining space. This should fail, but if it somehow succeeds we can then immediately delete it. I've tested this on the UEFI machines I have available, but I don't have a Samsung and so can't verify that it avoids the bricking problem. Signed-off-by:
Matthew Garrett <matthew.garrett@nebula.com> Signed-off-by: Lee, Chun-Y <jlee@suse.com> [ dummy variable cleanup ] Signed-off-by:
-
Anders Hammarquist authored
commit 35a2fbc9 upstream. Add product id for Abbott strip port cable for Precision meter which uses the TI 3410 chip. Signed-off-by:
Anders Hammarquist <iko@iko.pp.se> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Randy Dunlap authored
commit d1603990 upstream. Fix kconfig warning and build errors on x86_64 by selecting BINFMT_ELF when COMPAT_BINFMT_ELF is being selected. warning: (IA32_EMULATION) selects COMPAT_BINFMT_ELF which has unmet direct dependencies (COMPAT && BINFMT_ELF) fs/built-in.o: In function `elf_core_dump': compat_binfmt_elf.c:(.text+0x3e093): undefined reference to `elf_core_extra_phdrs' compat_binfmt_elf.c:(.text+0x3ebcd): undefined reference to `elf_core_extra_data_size' compat_binfmt_elf.c:(.text+0x3eddd): undefined reference to `elf_core_write_extra_phdrs' compat_binfmt_elf.c:(.text+0x3f004): undefined reference to `elf_core_write_extra_data' [ hpa: This was sent to me for -next but it is a low risk build fix ] Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Link: http://lkml.kernel.org/r/51C0B614.5000708@infradead.orgSigned-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
Zhanghaoyu (A) authored
commit 764bcbc5 upstream. __kvm_set_xcr function does the CPL check when set xcr. __kvm_set_xcr is called in two flows, one is invoked by guest, call stack shown as below, handle_xsetbv(or xsetbv_interception) kvm_set_xcr __kvm_set_xcr the other one is invoked by host, for example during system reset: kvm_arch_vcpu_ioctl kvm_vcpu_ioctl_x86_set_xcrs __kvm_set_xcr The former does need the CPL check, but the latter does not. Signed-off-by:
Zhang Haoyu <haoyu.zhang@huawei.com> [Tweaks to commit message. - Paolo] Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Simon Baatz authored
commit 63384fd0 upstream. Commit 1bc39742 (ARM: 7755/1: handle user space mapped pages in flush_kernel_dcache_page) moved the implementation of flush_kernel_dcache_page() into mm/flush.c but did not implement it on noMMU ARM. Signed-off-by:
Simon Baatz <gmbnomis@gmail.com> Acked-by:
Kevin Hilman <khilman@linaro.org> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Simon Baatz authored
commit 1bc39742 upstream. Commit f8b63c18 made flush_kernel_dcache_page a no-op assuming that the pages it needs to handle are kernel mapped only. However, for example when doing direct I/O, pages with user space mappings may occur. Thus, continue to do lazy flushing if there are no user space mappings. Otherwise, flush the kernel cache lines directly. Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Takashi Iwai authored
commit 36691e1b upstream. Just like the previous fix for LogitechHD Webcam c270 in commit 11e7064f, c310 model also requires the same workaround for avoiding the kernel warning. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59741Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Clemens Ladisch authored
commit 342cda29 upstream. When the Android firmware enables the audio interfaces in accessory mode, it always declares in the control interface's baInterfaceNr array that interfaces 0 and 1 belong to the audio function. However, the accessory interface itself, if also enabled, already is at index 0 and shifts the actual audio interface numbers to 1 and 2, which prevents the PCM streaming interface from being seen by the host driver. To get the PCM interface interface to work, detect when the descriptors point to the (for this driver useless) accessory interface, and redirect to the correct one. Reported-by:
Jeremy Rosen <jeremy.rosen@openwide.fr> Tested-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
Chris Metcalf authored
commit 3cb3f839 upstream. gcc 4.7.x is emitting calls to __ffsdi2 where previously it used to inline the appropriate ctz instructions. While this needs to be fixed in gcc, it's also easy to avoid having it cause build failures when building with those compilers by exporting __ffsdi2 to modules. Signed-off-by:
Chris Metcalf <cmetcalf@tilera.com> Signed-off-by:
-
- 19 Jun, 2013 10 commits
-
-
Ben Hutchings authored
-
Paul Mackerras authored
commit bf593907 upstream. Normally, the kernel emulates a few instructions that are unimplemented on some processors (e.g. the old dcba instruction), or privileged (e.g. mfpvr). The emulation of unimplemented instructions is currently not working on the PowerNV platform. The reason is that on these machines, unimplemented and illegal instructions cause a hypervisor emulation assist interrupt, rather than a program interrupt as on older CPUs. Our vector for the emulation assist interrupt just calls program_check_exception() directly, without setting the bit in SRR1 that indicates an illegal instruction interrupt. This fixes it by making the emulation assist interrupt set that bit before calling program_check_interrupt(). With this, old programs that use no-longer implemented instructions such as dcba now work again. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Nithin Sujir authored
commit df465abf upstream. Some systems that don't need wake-on-lan may choose to power down the chip on system standby. Upon resume, the power on causes the boot code to startup and initialize the hardware. On one new platform, this is causing the device to go into a bad state due to a race between the driver and boot code, once every several hundred resumes. The same race exists on open since we come up from a power on. This patch adds a wait for boot code signature at the beginning of tg3_init_hw() which is common to both cases. If there has not been a power-off or the boot code has already completed, the signature will be present and poll_fw() returns immediately. Also return immediately if the device does not have firmware. Signed-off-by:
Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Alex Lyakas authored
md/raid1: consider WRITE as successful only if at least one non-Faulty and non-rebuilding drive completed it. commit 3056e3ae upstream. Without that fix, the following scenario could happen: - RAID1 with drives A and B; drive B was freshly-added and is rebuilding - Drive A fails - WRITE request arrives to the array. It is failed by drive A, so r1_bio is marked as R1BIO_WriteError, but the rebuilding drive B succeeds in writing it, so the same r1_bio is marked as R1BIO_Uptodate. - r1_bio arrives to handle_write_finished, badblocks are disabled, md_error()->error() does nothing because we don't fail the last drive of raid1 - raid_end_bio_io() calls call_bio_endio() - As a result, in call_bio_endio(): if (!test_bit(R1BIO_Uptodate, &r1_bio->state)) clear_bit(BIO_UPTODATE, &bio->bi_flags); this code doesn't clear the BIO_UPTODATE flag, and the whole master WRITE succeeds, back to the upper layer. So we returned success to the upper layer, even though we had written the data onto the rebuilding drive only. But when we want to read the data back, we would not read from the rebuilding drive, so this data is lost. [neilb - applied identical change to raid10 as well] This bug can result in lost data, so it is suitable for any -stable kernel. Signed-off-by:
Alex Lyakas <alex@zadarastorage.com> Signed-off-by:
NeilBrown <neilb@suse.de> [bwh: Backported to 3.2: for raid10, s/rdev/conf->mirrors[dev].rdev/] Signed-off-by:
-
Kees Cook authored
commit c8a22d19 upstream. Fixes a typo in register clearing code. Thanks to PaX Team for fixing this originally, and James Troup for pointing it out. Signed-off-by:
Kees Cook <keescook@chromium.org> Link: http://lkml.kernel.org/r/20130605184718.GA8396@www.outflux.net Cc: PaX Team <pageexec@freemail.hu> Signed-off-by:
-
Johan Hovold authored
commit 2d8f4447 upstream. Do not use uninitialised termios data to determine when to configure the device at open. This also prevents stack data from leaking to userspace in the OOM error path. Signed-off-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
-
Johan Hovold authored
commit 5e4211f1 upstream. Do not use uninitialised termios data to determine when to configure the device at open. Signed-off-by:
-
Naoya Horiguchi authored
commit 30dad309 upstream. When we have a page fault for the address which is backed by a hugepage under migration, the kernel can't wait correctly and do busy looping on hugepage fault until the migration finishes. As a result, users who try to kick hugepage migration (via soft offlining, for example) occasionally experience long delay or soft lockup. This is because pte_offset_map_lock() can't get a correct migration entry or a correct page table lock for hugepage. This patch introduces migration_entry_wait_huge() to solve this. Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by:
Rik van Riel <riel@redhat.com> Reviewed-by:
Wanpeng Li <liwanp@linux.vnet.ibm.com> Reviewed-by:
Michal Hocko <mhocko@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: Andi Kleen <andi@firstfloor.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Rafael Aquini authored
commit cbab0e4e upstream. read_swap_cache_async() can race against get_swap_page(), and stumble across a SWAP_HAS_CACHE entry in the swap map whose page wasn't brought into the swapcache yet. This transient swap_map state is expected to be transitory, but the actual placement of discard at scan_swap_map() inserts a wait for I/O completion thus making the thread at read_swap_cache_async() to loop around its -EEXIST case, while the other end at get_swap_page() is scheduled away at scan_swap_map(). This can leave the system deadlocked if the I/O completion happens to be waiting on the CPU waitqueue where read_swap_cache_async() is busy looping and !CONFIG_PREEMPT. This patch introduces a cond_resched() call to make the aforementioned read_swap_cache_async() busy loop condition to bail out when necessary, thus avoiding the subtle race window. Signed-off-by:
Rafael Aquini <aquini@redhat.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by:
Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Signed-off-by:
-
Tony Lindgren authored
commit 24b8256a upstream. When booted in legacy mode device_init_wakeup() gets called by drivers/mfd/twl-core.c when the children are initialized. However, when booted using device tree, the children are created with of_platform_populate() instead add_children(). This means that the RTC driver will not have device_init_wakeup() set, and we need to call it from the driver probe like RTC drivers typically do. Without this we cannot test PM wake-up events on omaps for cases where there may not be any physical wake-up event. Signed-off-by:
Tony Lindgren <tony@atomide.com> Reported-by:
-
