- 02 Feb, 2016 40 commits
-
-
Takashi Iwai authored
commit af368027 upstream. ALSA timer ioctls have an open race and this may lead to a use-after-free of timer instance object. A simplistic fix is to make each ioctl exclusive. We have already tread_sem for controlling the tread, and extend this as a global mutex to be applied to each ioctl. The downside is, of course, the worse concurrency. But these ioctls aren't to be parallel accessible, in anyway, so it should be fine to serialize there. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Tested-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Linus Walleij authored
commit 0bcb7efd upstream. commit 4956e109 ("ARM: 6244/1: mmci: add variant data and default MCICLOCK support") added variant data for ARM, U300 and Ux500 variants. The Nomadik NHK8815/8820 variant was erroneously labeled as a U300 variant, and when the proper Nomadik variant was later introduced in commit 34fd4213 ("ARM: 7378/1: mmci: add support for the Nomadik MMCI variant") this was not fixes. Let's say this fixes the latter commit as there was no proper Nomadik support until then. Fixes: 34fd4213 ("ARM: 7378/1: mmci: add support for the Nomadik...") Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Mans Rullgard authored
commit 2895b2ca upstream. Cyclic transfer callbacks rely on block completion interrupts which were disabled in commit ff7b05f2 ("dmaengine/dw_dmac: Don't handle block interrupts"). This re-enables block interrupts so the cyclic callbacks can work. Other transfer types are not affected as they set the INT_EN bit only on the last block. Fixes: ff7b05f2 ("dmaengine/dw_dmac: Don't handle block interrupts") Signed-off-by:
Mans Rullgard <mans@mansr.com> Reviewed-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Mans Rullgard authored
commit df3bb8a0 upstream. Commit 61e183f8 ("dmaengine/dw_dmac: Reconfigure interrupt and chan_cfg register on resume") moved some channel initialisation to a new function which must be called before starting a transfer. This updates dw_dma_cyclic_start() to use dwc_dostart() like the other modes, thus ensuring dwc_initialize() gets called and removing some code duplication. Fixes: 61e183f8 ("dmaengine/dw_dmac: Reconfigure interrupt and chan_cfg register on resume") Signed-off-by:
-
Takashi Iwai authored
commit ee8413b0 upstream. ALSA timer instance object has a couple of linked lists and they are unlinked unconditionally at snd_timer_stop(). Meanwhile snd_timer_interrupt() unlinks it, but it calls list_del() which leaves the element list itself unchanged. This ends up with unlinking twice, and it was caught by syzkaller fuzzer. The fix is to use list_del_init() variant properly there, too. Reported-by:
-
Andy Lutomirski authored
commit 4eaffdd5 upstream. My previous comments were still a bit confusing and there was a typo. Fix it up. Reported-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 71b3c126 ("x86/mm: Add barriers and document switch_mm()-vs-flush synchronization") Link: http://lkml.kernel.org/r/0a0b43cdcdd241c5faaaecfbcc91a155ddedc9a1.1452631609.git.luto@kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Ulrich Weigand authored
commit a61674bd upstream. GCC 6 will include changes to generated code with -mcmodel=large, which is used to build kernel modules on powerpc64le. This was necessary because the large model is supposed to allow arbitrary sizes and locations of the code and data sections, but the ELFv2 global entry point prolog still made the unconditional assumption that the TOC associated with any particular function can be found within 2 GB of the function entry point: func: addis r2,r12,(.TOC.-func)@ha addi r2,r2,(.TOC.-func)@l .localentry func, .-func To remove this assumption, GCC will now generate instead this global entry point prolog sequence when using -mcmodel=large: .quad .TOC.-func func: .reloc ., R_PPC64_ENTRY ld r2, -8(r12) add r2, r2, r12 .localentry func, .-func The new .reloc triggers an optimization in the linker that will replace this new prolog with the original code (see above) if the linker determines that the distance between .TOC. and func is in range after all. Since this new relocation is now present in module object files, the kernel module loader is required to handle them too. This patch adds support for the new relocation and implements the same optimization done by the GNU linker. Signed-off-by:
Ulrich Weigand <ulrich.weigand@de.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Ulrich Weigand authored
commit 2e50c4be upstream. If a text section starts out with a data blob before the first function start label, disassembly parsing doing in recordmcount.pl gets confused on powerpc, leading to creation of corrupted module objects. This was not a problem so far since the compiler would never create such text sections. However, this has changed with a recent change in GCC 6 to support distances of > 2GB between a function and its assoicated TOC in the ELFv2 ABI, exposing this problem. There is already code in recordmcount.pl to handle such data blobs on the sparc64 platform. This patch uses the same method to handle those on powerpc as well. Acked-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Helge Deller authored
commit e60fc5aa upstream. On a 64bit kernel build the compiler aligns the _sifields union in the struct siginfo_t on a 64bit address. The __ARCH_SI_PREAMBLE_SIZE define compensates for this alignment and thus fixes the wait testcase of the strace package. The symptoms of a wrong __ARCH_SI_PREAMBLE_SIZE value is that _sigchld.si_stime variable is missed to be copied and thus after a copy_siginfo() will have uninitialized values. Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Minchan Kim authored
commit 21ea9fb6 upstream. In balloon_page_dequeue, pages_lock should cover the loop (ie, list_for_each_entry_safe). Otherwise, the cursor page could be isolated by compaction and then list_del by isolation could poison the page->lru.{prev,next} so the loop finally could access wrong address like this. This patch fixes the bug. general protection fault: 0000 [#1] SMP Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 2 PID: 82 Comm: vballoon Not tainted 4.4.0-rc5-mm1-access_bit+ #1906 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff8800a7ff0000 ti: ffff8800a7fec000 task.ti: ffff8800a7fec000 RIP: 0010:[<ffffffff8115e754>] [<ffffffff8115e754>] balloon_page_dequeue+0x54/0x130 RSP: 0018:ffff8800a7fefdc0 EFLAGS: 00010246 RAX: ffff88013fff9a70 RBX: ffffea000056fe00 RCX: 0000000000002b7d RDX: ffff88013fff9a70 RSI: ffffea000056fe00 RDI: ffff88013fff9a68 RBP: ffff8800a7fefde8 R08: ffffea000056fda0 R09: 0000000000000000 R10: ffff8800a7fefd90 R11: 0000000000000001 R12: dead0000000000e0 R13: ffffea000056fe20 R14: ffff880138809070 R15: ffff880138809060 FS: 0000000000000000(0000) GS:ffff88013fc40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f229c10e000 CR3: 00000000b8b53000 CR4: 00000000000006a0 Stack: 0000000000000100 ffff880138809088 ffff880138809000 ffff880138809060 0000000000000046 ffff8800a7fefe28 ffffffff812c86d3 ffff880138809020 ffff880138809000 fffffffffff91900 0000000000000100 ffff880138809060 Call Trace: [<ffffffff812c86d3>] leak_balloon+0x93/0x1a0 [<ffffffff812c8bc7>] balloon+0x217/0x2a0 [<ffffffff8143739e>] ? __schedule+0x31e/0x8b0 [<ffffffff81078160>] ? abort_exclusive_wait+0xb0/0xb0 [<ffffffff812c89b0>] ? update_balloon_stats+0xf0/0xf0 [<ffffffff8105b6e9>] kthread+0xc9/0xe0 [<ffffffff8105b620>] ? kthread_park+0x60/0x60 [<ffffffff8143b4af>] ret_from_fork+0x3f/0x70 [<ffffffff8105b620>] ? kthread_park+0x60/0x60 Code: 8d 60 e0 0f 84 af 00 00 00 48 8b 43 20 a8 01 75 3b 48 89 d8 f0 0f ba 28 00 72 10 48 8b 03 f6 c4 08 75 2f 48 89 df e8 8c 83 f9 ff <49> 8b 44 24 20 4d 8d 6c 24 20 48 83 e8 20 4d 39 f5 74 7a 4c 89 RIP [<ffffffff8115e754>] balloon_page_dequeue+0x54/0x130 RSP <ffff8800a7fefdc0> ---[ end trace 43cf28060d708d5f ]--- Kernel panic - not syncing: Fatal exception Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: disabled Signed-off-by:
Minchan Kim <minchan@kernel.org> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Rafael Aquini <aquini@redhat.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Minchan Kim authored
commit f68b992b upstream. During my compaction-related stuff, I encountered a bug with ballooning. With repeated inflating and deflating cycle, guest memory( ie, cat /proc/meminfo | grep MemTotal) is decreased and couldn't be recovered. The reason is balloon_lock doesn't cover release_pages_balloon so struct virtio_balloon fields could be overwritten by race of fill_balloon(e,g, vb->*pfns could be critical). This patch fixes it in my test. Signed-off-by:
-
Takashi Iwai authored
commit 3567eb6a upstream. ALSA sequencer code has an open race between the timer setup ioctl and the close of the client. This was triggered by syzkaller fuzzer, and a use-after-free was caught there as a result. This patch papers over it by adding a proper queue->timer_mutex lock around the timer-related calls in the relevant code path. Reported-by:
-
Takashi Iwai authored
commit 030e2c78 upstream. snd_seq_ioctl_remove_events() calls snd_seq_fifo_clear() unconditionally even if there is no FIFO assigned, and this leads to an Oops due to NULL dereference. The fix is just to add a proper NULL check. Reported-by:
-
Mario Kleiner authored
commit 2f0c0b2d upstream. Without the reboot=pci method, the iMac 10,1 simply hangs after printing "Restarting system" at the point when it should reboot. This fixes it. Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1450466646-26663-1-git-send-email-mario.kleiner.de@gmail.comSigned-off-by:
-
Benjamin Tissoires authored
commit 6544a1df upstream. When using a protocol v2 or v3 hardware, elantech uses the function elantech_report_semi_mt_data() to report data. This devices are rather creepy because if num_finger is 3, (x2,y2) is (0,0). Yes, only one valid touch is reported. Anyway, userspace (libinput) is now confused by these (0,0) touches, and detect them as palm, and rejects them. Commit 3c0213d1 ("Input: elantech - fix semi-mt protocol for v3 HW") was sufficient enough for xf86-input-synaptics and libinput before it has palm rejection. Now we need to actually tell libinput that this device is a semi-mt one and it should not rely on the actual values of the 2 touches. Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Roman Volkov authored
commit f9eccf24 upstream. The vt8500 clocksource driver declares itself as capable to handle the minimum delay of 4 cycles by passing the value into clockevents_config_and_register(). The vt8500_timer_set_next_event() requires the passed cycles value to be at least 16. The impact is that userspace hangs in nanosleep() calls with small delay intervals. This problem is reproducible in Linux 4.2 starting from: c6eb3f70 ('hrtimer: Get rid of hrtimer softirq') From Russell King, more detailed explanation: "It's a speciality of the StrongARM/PXA hardware. It takes a certain number of OSCR cycles for the value written to hit the compare registers. So, if a very small delta is written (eg, the compare register is written with a value of OSCR + 1), the OSCR will have incremented past this value before it hits the underlying hardware. The result is, that you end up waiting a very long time for the OSCR to wrap before the event fires. So, we introduce a check in set_next_event() to detect this and return -ETIME if the calculated delta is too small, which causes the generic clockevents code to retry after adding the min_delta specified in clockevents_config_and_register() to the current time value. min_delta must be sufficient that we don't re-trip the -ETIME check - if we do, we will return -ETIME, forward the next event time, try to set it, return -ETIME again, and basically lock the system up. So, min_delta must be larger than the check inside set_next_event(). A factor of two was chosen to ensure that this situation would never occur. The PXA code worked on PXA systems for years, and I'd suggest no one changes this mechanism without access to a wide range of PXA systems, otherwise they're risking breakage." Cc: Russell King <linux@arm.linux.org.uk> Acked-by:
Alexey Charkov <alchark@gmail.com> Signed-off-by:
Roman Volkov <rvolkov@v1ros.org> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
-
Dave Chinner authored
commit 7d6a13f0 upstream. When we do dquot readahead in log recovery, we do not use a verifier as the underlying buffer may not have dquots in it. e.g. the allocation operation hasn't yet been replayed. Hence we do not want to fail recovery because we detect an operation to be replayed has not been run yet. This problem was addressed for inodes in commit d8914002 ("xfs: inode buffers may not be valid during recovery readahead") but the problem was not recognised to exist for dquots and their buffers as the dquot readahead did not have a verifier. The result of not using a verifier is that when the buffer is then next read to replay a dquot modification, the dquot buffer verifier will only be attached to the buffer if *readahead is not complete*. Hence we can read the buffer, replay the dquot changes and then add it to the delwri submission list without it having a verifier attached to it. This then generates warnings in xfs_buf_ioapply(), which catches and warns about this case. Fix this and make it handle the same readahead verifier error cases as for inode buffers by adding a new readahead verifier that has a write operation as well as a read operation that marks the buffer as not done if any corruption is detected. Also make sure we don't run readahead if the dquot buffer has been marked as cancelled by recovery. This will result in readahead either succeeding and the buffer having a valid write verifier, or readahead failing and the buffer state requiring the subsequent read to resubmit the IO with the new verifier. In either case, this will result in the buffer always ending up with a valid write verifier on it. Note: we also need to fix the inode buffer readahead error handling to mark the buffer with EIO. Brian noticed the code I copied from there wrong during review, so fix it at the same time. Add comments linking the two functions that handle readahead verifier errors together so we don't forget this behavioural link in future. Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> [ luis: backported to 3.16: - struct xfs_buf_ops does not have a 'name' field in 3.16 - adjusted context ] Signed-off-by:
-
Dave Chinner authored
commit b79f4a1c upstream. When we do inode readahead in log recovery, we do can do the readahead before we've replayed the icreate transaction that stamps the buffer with inode cores. The inode readahead verifier catches this and marks the buffer as !done to indicate that it doesn't yet contain valid inodes. In adding buffer error notification (i.e. setting b_error = -EIO at the same time as as we clear the done flag) to such a readahead verifier failure, we can then get subsequent inode recovery failing with this error: XFS (dm-0): metadata I/O error: block 0xa00060 ("xlog_recover_do..(read#2)") error 5 numblks 32 This occurs when readahead completion races with icreate item replay such as: inode readahead find buffer lock buffer submit RA io .... icreate recovery xfs_trans_get_buffer find buffer lock buffer <blocks on RA completion> ..... <ra completion> fails verifier clear XBF_DONE set bp->b_error = -EIO release and unlock buffer <icreate gains lock> icreate initialises buffer marks buffer as done adds buffer to delayed write queue releases buffer At this point, we have an initialised inode buffer that is up to date but has an -EIO state registered against it. When we finally get to recovering an inode in that buffer: inode item recovery xfs_trans_read_buffer find buffer lock buffer sees XBF_DONE is set, returns buffer sees bp->b_error is set fail log recovery! Essentially, we need xfs_trans_get_buf_map() to clear the error status of the buffer when doing a lookup. This function returns uninitialised buffers, so the buffer returned can not be in an error state and none of the code that uses this function expects b_error to be set on return. Indeed, there is an ASSERT(!bp->b_error); in the transaction case in xfs_trans_get_buf_map() that would have caught this if log recovery used transactions.... This patch firstly changes the inode readahead failure to set -EIO on the buffer, and secondly changes xfs_buf_get_map() to never return a buffer with an error state set so this first change doesn't cause unexpected log recovery failures. Signed-off-by:
-
Ard Biesheuvel authored
commit bcb7825a upstream. The normalization pass in the sorting routine of the relative exception table serves two purposes: - it ensures that the address fields of the exception table entries are fully ordered, so that no ambiguities arise between entries with identical instruction offsets (i.e., when two instructions that are exactly 8 bytes apart each have an exception table entry associated with them) - it ensures that the offsets of both the instruction and the fixup fields of each entry are relative to their final location after sorting. Commit eb608fb3 ("s390/exceptions: switch to relative exception table entries") ported the relative exception table format from x86, but modified the sorting routine to only normalize the instruction offset field and not the fixup offset field. The result is that the fixup offset of each entry will be relative to the original location of the entry before sorting, likely leading to crashes when those entries are dereferenced. Fixes: eb608fb3 ("s390/exceptions: switch to relative exception table entries") Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
H.J. Lu authored
commit 8c31902c upstream. When decompressing kernel image during x86 bootup, malloc memory for ELF program headers may run out of heap space, which leads to system halt. This patch doubles BOOT_HEAP_SIZE to 64KB. Tested with 32-bit kernel which failed to boot without this patch. Signed-off-by:
H.J. Lu <hjl.tools@gmail.com> Acked-by:
H. Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Andy Lutomirski authored
commit 71b3c126 upstream. When switch_mm() activates a new PGD, it also sets a bit that tells other CPUs that the PGD is in use so that TLB flush IPIs will be sent. In order for that to work correctly, the bit needs to be visible prior to loading the PGD and therefore starting to fill the local TLB. Document all the barriers that make this work correctly and add a couple that were missing. Signed-off-by:
-
Ben Skeggs authored
commit 0a882cad upstream. fdo#93634 Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Vegard Nossum authored
commit 0754fb29 upstream. I was seeing some really weird behaviour where piping UML's output somewhere would cause output to get duplicated: $ ./vmlinux | head -n 40 Checking that ptrace can change system call numbers...Core dump limits : soft - 0 hard - NONE OK Checking syscall emulation patch for ptrace...Core dump limits : soft - 0 hard - NONE OK Checking advanced syscall emulation patch for ptrace...Core dump limits : soft - 0 hard - NONE OK Core dump limits : soft - 0 hard - NONE This is because these tests do a fork() which duplicates the non-empty stdout buffer, then glibc flushes the duplicated buffer as each child exits. A simple workaround is to flush before forking. Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Vegard Nossum authored
commit 9f2dfda2 upstream. An inverted return value check in hostfs_mknod() caused the function to return success after handling it as an error (and cleaning up). It resulted in the following segfault when trying to bind() a named unix socket: Pid: 198, comm: a.out Not tainted 4.4.0-rc4 RIP: 0033:[<0000000061077df6>] RSP: 00000000daae5d60 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 000000006092a460 RCX: 00000000dfc54208 RDX: 0000000061073ef1 RSI: 0000000000000070 RDI: 00000000e027d600 RBP: 00000000daae5de0 R08: 00000000da980ac0 R09: 0000000000000000 R10: 0000000000000003 R11: 00007fb1ae08f72a R12: 0000000000000000 R13: 000000006092a460 R14: 00000000daaa97c0 R15: 00000000daaa9a88 Kernel panic - not syncing: Kernel mode fault at addr 0x40, ip 0x61077df6 CPU: 0 PID: 198 Comm: a.out Not tainted 4.4.0-rc4 #1 Stack: e027d620 dfc54208 0000006f da981398 61bee000 0000c1ed daae5de0 0000006e e027d620 dfcd4208 00000005 6092a460 Call Trace: [<60dedc67>] SyS_bind+0xf7/0x110 [<600587be>] handle_syscall+0x7e/0x80 [<60066ad7>] userspace+0x3e7/0x4e0 [<6006321f>] ? save_registers+0x1f/0x40 [<6006c88e>] ? arch_prctl+0x1be/0x1f0 [<60054985>] fork_handler+0x85/0x90 Let's also get rid of the "cosmic ray protection" while we're at it. Fixes: e9193059 "hostfs: fix races in dentry_name() and inode_name()" Signed-off-by:
-
Mikulas Patocka authored
commit 385277bf upstream. When there is an error copying a chunk dm-snapshot can incorrectly hold associated bios indefinitely, resulting in hung IO. The function copy_callback sets pe->error if there was error copying the chunk, and then calls complete_exception. complete_exception calls pending_complete on error, otherwise it calls commit_exception with commit_callback (and commit_callback calls complete_exception). The persistent exception store (dm-snap-persistent.c) assumes that calls to prepare_exception and commit_exception are paired. persistent_prepare_exception increases ps->pending_count and persistent_commit_exception decreases it. If there is a copy error, persistent_prepare_exception is called but persistent_commit_exception is not. This results in the variable ps->pending_count never returning to zero and that causes some pending exceptions (and their associated bios) to be held forever. Fix this by unconditionally calling commit_exception regardless of whether the copy was successful. A new "valid" parameter is added to commit_exception -- when the copy fails this parameter is set to zero so that the chunk that failed to copy (and all following chunks) is not recorded in the snapshot store. Also, remove commit_callback now that it is merely a wrapper around pending_complete. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Vinod Koul authored
commit a1068045 upstream. The detection of direction for compress was only taking into account codec capabilities and not CPU ones. Fix this by checking the CPU side capabilities as well Tested-by:
Ashish Panwar <ashish.panwar@intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Jeff Layton authored
commit 7f3697e2 upstream. Dmitry reported that he was able to reproduce the WARN_ON_ONCE that fires in locks_free_lock_context when the flc_posix list isn't empty. The problem turns out to be that we're basically rebuilding the file_lock from scratch in fcntl_setlk when we discover that the setlk has raced with a close. If the l_whence field is SEEK_CUR or SEEK_END, then we may end up with fl_start and fl_end values that differ from when the lock was initially set, if the file position or length of the file has changed in the interim. Fix this by just reusing the same lock request structure, and simply override fl_type value with F_UNLCK as appropriate. That ensures that we really are unlocking the lock that was initially set. While we're there, make sure that we do pop a WARN_ON_ONCE if the removal ever fails. Also return -EBADF in this event, since that's what we would have returned if the close had happened earlier. Cc: Alexander Viro <viro@zeniv.linux.org.uk> Fixes: c293621b (stale POSIX lock handling) Reported-by:
Jeff Layton <jeff.layton@primarydata.com> Acked-by:
"J. Bruce Fields" <bfields@fieldses.org> Signed-off-by:
-
Oren Givon authored
commit 006bda75 upstream. Update and fix some 7265 PCI IDs entries. Signed-off-by:
Oren Givon <oren.givon@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Grygorii Strashko authored
commit 8ff0ef99 upstream. On -RT and if kernel is booting with "threadirqs" cmd line parameter, PCIe/PCI (MSI) IRQ cascade handlers (like dra7xx_pcie_msi_irq_handler()) will be forced threaded and, as result, will generate warnings like this: WARNING: CPU: 1 PID: 82 at kernel/irq/handle.c:150 handle_irq_event_percpu+0x14c/0x174() irq 460 handler irq_default_primary_handler+0x0/0x14 enabled interrupts Backtrace: (warn_slowpath_common) from (warn_slowpath_fmt+0x38/0x40) (warn_slowpath_fmt) from (handle_irq_event_percpu+0x14c/0x174) (handle_irq_event_percpu) from (handle_irq_event+0x84/0xb8) (handle_irq_event) from (handle_simple_irq+0x90/0x118) (handle_simple_irq) from (generic_handle_irq+0x30/0x44) (generic_handle_irq) from (dra7xx_pcie_msi_irq_handler+0x7c/0x8c) (dra7xx_pcie_msi_irq_handler) from (irq_forced_thread_fn+0x28/0x5c) (irq_forced_thread_fn) from (irq_thread+0x128/0x204) This happens because all of them invoke generic_handle_irq() from the requested handler. generic_handle_irq() grabs raw_locks and thus needs to run in raw-IRQ context. This issue was originally reproduced on TI dra7-evem, but, as was identified during discussion [1], other hosts can also suffer from this issue. Fix all them at once by marking PCIe/PCI (MSI) IRQ cascade handlers IRQF_NO_THREAD explicitly. [1] http://lkml.kernel.org/r/1448027966-21610-1-git-send-email-grygorii.strashko@ti.com [bhelgaas: add stable tag, fix typos] Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> (for imx6) CC: Kishon Vijay Abraham I <kishon@ti.com> CC: Jingoo Han <jingoohan1@gmail.com> CC: Kukjin Kim <kgene@kernel.org> CC: Krzysztof Kozlowski <k.kozlowski@samsung.com> CC: Richard Zhu <Richard.Zhu@freescale.com> CC: Thierry Reding <thierry.reding@gmail.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Alexandre Courbot <gnurou@gmail.com> CC: Simon Horman <horms@verge.net.au> CC: Pratyush Anand <pratyush.anand@gmail.com> CC: Michal Simek <michal.simek@xilinx.com> CC: "Sören Brinkmann" <soren.brinkmann@xilinx.com> CC: Sebastian Andrzej Siewior <bigeasy@linutronix.de> [ luis: backported to 3.16: - dropped changes to pci-dra7xx.c, pcie-spear13xx.c, pcie-xilinx.c - adjusted context ] Signed-off-by:
-
Christoph Biedl authored
commit 3460baa6 upstream. Commit 36e097a8 ("PCI: Split out bridge window override of minimum allocation address") claimed to do no functional changes but unfortunately did: The "min" variable is altered. At least the AVM A1 PCMCIA adapter was no longer detected, breaking ISDN operation. Use a local copy of "min" to restore the previous behaviour. [bhelgaas: avoid gcc "?:" extension for portability and readability] Fixes: 36e097a8 ("PCI: Split out bridge window override of minimum allocation address") Signed-off-by:
Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de> Signed-off-by:
-
Andrew Gabbasov authored
commit bb00c898 upstream. If a name contains at least some characters with Unicode values exceeding single byte, the CS0 output should have 2 bytes per character. And if other input characters have single byte Unicode values, then the single input byte is converted to 2 output bytes, and the length of output becomes larger than the length of input. And if the input name is long enough, the output length may exceed the allocated buffer length. All this means that conversion from UTF8 or NLS to CS0 requires checking of output length in order to stop when it exceeds the given output buffer size. [JK: Make code return -ENAMETOOLONG instead of silently truncating the name] Signed-off-by:
Andrew Gabbasov <andrew_gabbasov@mentor.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Andrew Gabbasov authored
commit ad402b26 upstream. udf_CS0toUTF8 function stops the conversion when the output buffer length reaches UDF_NAME_LEN-2, which is correct maximum name length, but, when checking, it leaves the space for a single byte only, while multi-bytes output characters can take more space, causing buffer overflow. Similar error exists in udf_CS0toNLS function, that restricts the output length to UDF_NAME_LEN, while actual maximum allowed length is UDF_NAME_LEN-2. In these cases the output can override not only the current buffer length field, causing corruption of the name buffer itself, but also following allocation structures, causing kernel crash. Adjust the output length checks in both functions to prevent buffer overruns in case of multi-bytes UTF8 or NLS characters. Signed-off-by:
-
Ouyang Zhaowei (Charles) authored
commit 6a1f5137 upstream. On a cancelled suspend the vcpu_info location does not change (it's still in the per-cpu area registered by xen_vcpu_setup()). So do not call xen_hvm_init_shared_info() which would make the kernel think its back in the shared info. With the wrong vcpu_info, events cannot be received and the domain will hang after a cancelled suspend. Signed-off-by:
Charles Ouyang <ouyangzhaowei@huawei.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Darrick J. Wong authored
commit 96f859d5 upstream. Because struct xfs_agfl is 36 bytes long and has a 64-bit integer inside it, gcc will quietly round the structure size up to the nearest 64 bits -- in this case, 40 bytes. This results in the XFS_AGFL_SIZE macro returning incorrect results for v5 filesystems on 64-bit machines (118 items instead of 119). As a result, a 32-bit xfs_repair will see garbage in AGFL item 119 and complain. Therefore, tell gcc not to pad the structure so that the AGFL size calculation is correct. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
-
Aurélien Francillon authored
commit dd0d0d4d upstream. Without i8042.nomux=1 the Elantech touch pad is not working at all on a Fujitsu Lifebook U745. This patch does not seem necessary for all U745 (maybe because of different BIOS versions?). However, it was verified that the patch does not break those (see opensuse bug 883192: https://bugzilla.opensuse.org/show_bug.cgi?id=883192). Signed-off-by:
Aurélien Francillon <aurelien@francillon.net> Signed-off-by:
-
Uri Mashiach authored
commit e47301b0 upstream. Fix the below Oops when trying to modprobe wlcore_spi. The oops occurs because the wl1271_power_{off,on}() function doesn't check the power() function pointer. [ 23.401447] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 23.409954] pgd = c0004000 [ 23.412922] [00000000] *pgd=00000000 [ 23.416693] Internal error: Oops: 80000007 [#1] SMP ARM [ 23.422168] Modules linked in: wl12xx wlcore mac80211 cfg80211 musb_dsps musb_hdrc usbcore usb_common snd_soc_simple_card evdev joydev omap_rng wlcore_spi snd_soc_tlv320aic23_i2c rng_core snd_soc_tlv320aic23 c_can_platform c_can can_dev snd_soc_davinci_mcasp snd_soc_edma snd_soc_omap omap_wdt musb_am335x cpufreq_dt thermal_sys hwmon [ 23.453253] CPU: 0 PID: 36 Comm: kworker/0:2 Not tainted 4.2.0-00002-g951efee-dirty #233 [ 23.461720] Hardware name: Generic AM33XX (Flattened Device Tree) [ 23.468123] Workqueue: events request_firmware_work_func [ 23.473690] task: de32efc0 ti: de4ee000 task.ti: de4ee000 [ 23.479341] PC is at 0x0 [ 23.482112] LR is at wl12xx_set_power_on+0x28/0x124 [wlcore] [ 23.488074] pc : [<00000000>] lr : [<bf2581f0>] psr: 60000013 [ 23.488074] sp : de4efe50 ip : 00000002 fp : 00000000 [ 23.500162] r10: de7cdd00 r9 : dc848800 r8 : bf27af00 [ 23.505663] r7 : bf27a1a8 r6 : dcbd8a80 r5 : dce0e2e0 r4 : dce0d2e0 [ 23.512536] r3 : 00000000 r2 : 00000000 r1 : 00000001 r0 : dc848810 [ 23.519412] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 23.527109] Control: 10c5387d Table: 9cb78019 DAC: 00000015 [ 23.533160] Process kworker/0:2 (pid: 36, stack limit = 0xde4ee218) [ 23.539760] Stack: (0xde4efe50 to 0xde4f0000) [...] [ 23.665030] [<bf2581f0>] (wl12xx_set_power_on [wlcore]) from [<bf25f7ac>] (wlcore_nvs_cb+0x118/0xa4c [wlcore]) [ 23.675604] [<bf25f7ac>] (wlcore_nvs_cb [wlcore]) from [<c04387ec>] (request_firmware_work_func+0x30/0x58) [ 23.685784] [<c04387ec>] (request_firmware_work_func) from [<c0058e2c>] (process_one_work+0x1b4/0x4b4) [ 23.695591] [<c0058e2c>] (process_one_work) from [<c0059168>] (worker_thread+0x3c/0x4a4) [ 23.704124] [<c0059168>] (worker_thread) from [<c005ee68>] (kthread+0xd4/0xf0) [ 23.711747] [<c005ee68>] (kthread) from [<c000f598>] (ret_from_fork+0x14/0x3c) [ 23.719357] Code: bad PC value [ 23.722760] ---[ end trace 981be8510db9b3a9 ]--- Prevent oops by validationg power() pointer value before calling the function. Signed-off-by:
Uri Mashiach <uri.mashiach@compulab.co.il> Acked-by:
Igor Grinberg <grinberg@compulab.co.il> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Kent Overstreet authored
commit 627ccd20 upstream. Previously, it would only scan the entire disk if it was starting from the very start of the disk - i.e. if the previous scan got to the end. This was broken by refill_full_stripes(), which updates last_scanned so that refill_dirty was never triggering the searched_from_start path. But if we change refill_dirty() to always scan the entire disk if necessary, regardless of what last_scanned was, the code gets cleaner and we fix that bug too. Signed-off-by:
Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Stefan Bader authored
commit 8d16ce54 upstream. Added a safeguard in the shutdown case. At least while not being attached it is also possible to trigger a kernel bug by writing into writeback_running. This change adds the same check before trying to wake up the thread for that case. Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by:
-
Gabriel de Perthuis authored
commit d7076f21 upstream. Allows to use register, not register_quiet in udev to avoid "device_busy" error. The initial patch proposed at https://lkml.org/lkml/2013/8/26/549 by Gabriel de Perthuis <g2p.code@gmail.com> does not unlock the mutex and hangs the kernel. See http://thread.gmane.org/gmane.linux.kernel.bcache.devel/2594 for the discussion. Cc: Denis Bychkov <manover@gmail.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Eric Wheeler <bcache@linux.ewheeler.net> Cc: Gabriel de Perthuis <g2p.code@gmail.com> Signed-off-by:
-
Zheng Liu authored
commit 2ecf0cdb upstream. In bcache_init() function it forgot to unregister reboot notifier if bcache fails to unregister a block device. This commit fixes this. Signed-off-by:
Zheng Liu <wenqing.lz@taobao.com> Tested-by:
Joshua Schmid <jschmid@suse.com> Tested-by:
Eric Wheeler <bcache@linux.ewheeler.net> Cc: Kent Overstreet <kmo@daterainc.com> Signed-off-by:
-
