- 25 May, 2018 5 commits
-
-
James Smart authored
After creating the nvme controller, nvmf_create_ctrl() validates the newly created subsysnqn vs the one specified by the options. In general, this is an unnecessary check as the Connect message should implicitly ensure this value matches. With the change to the FC transport to do an asynchronous connect for the first association create, the transport will return to nvmf_create_ctrl() before that first association has been established, thus the subnqn will not yet be set. Remove the unnecessary validation. Signed-off-by:
James Smart <james.smart@broadcom.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
Christoph Hellwig <hch@lst.de>
-
James Smart authored
Current code will set DNR if the controller is deleting or there is an error during controller init. None of this is necessary. Remove the code that sets DNR Signed-off-by:
-
Jianchao Wang authored
For any failure after nvme_rdma_start_queue in nvme_rdma_configure_admin_queue, the admin queue will be freed with the NVME_RDMA_Q_LIVE flag still set. Once nvme_rdma_stop_queue is invoked, that will cause a use-after-free. BUG: KASAN: use-after-free in rdma_disconnect+0x1f/0xe0 [rdma_cm] To fix it, call nvme_rdma_stop_queue for all the failed cases after nvme_rdma_start_queue. Signed-off-by:
Jianchao Wang <jianchao.w.wang@oracle.com> Suggested-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
Max Gurtovoy <maxg@mellanox.com> Signed-off-by:
-
Keith Busch authored
The nvme timeout handling doesn't do anything if the pci channel is offline, which is the case when recovering from PCI error event, so it was a bad idea to sync the controller reset in this state. This patch flushes the reset work in the error_resume callback instead when the channel is back to online. This keeps AER handling serialized and can recover from timeouts. Link: https://bugzilla.kernel.org/show_bug.cgi?id=199757 Fixes: cc1d5e74 ("nvme/pci: Sync controller reset for AER slot_reset") Reported-by:
Alex Gagniuc <mr.nuke.me@gmail.com> Tested-by:
Keith Busch <keith.busch@intel.com> Signed-off-by:
-
Jianchao Wang authored
Set cq_vector after alloc cq/sq, otherwise nvme_suspend_queue will invoke free_irq for it and cause a 'Trying to free already-free IRQ xxx' warning if the create CQ/SQ command times out. Signed-off-by:
-
- 23 May, 2018 2 commits
-
-
Ivan Bornyakov authored
Ternary operator have lower precedence then bitwise or, so 'cdw10' was calculated wrong. Signed-off-by:
Ivan Bornyakov <brnkv.i1@gmail.com> Reviewed-by:
-
Johannes Thumshirn authored
When running blktest's nvme/005 with a lockdep enabled kernel the test case fails due to the following lockdep splat in dmesg: ============================= WARNING: suspicious RCU usage 4.17.0-rc5 #881 Not tainted ----------------------------- drivers/nvme/host/nvme.h:457 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 3 locks held by kworker/u32:5/1102: #0: (ptrval) ((wq_completion)"nvme-wq"){+.+.}, at: process_one_work+0x152/0x5c0 #1: (ptrval) ((work_completion)(&ctrl->scan_work)){+.+.}, at: process_one_work+0x152/0x5c0 #2: (ptrval) (&subsys->lock#2){+.+.}, at: nvme_ns_remove+0x43/0x1c0 [nvme_core] The only caller of nvme_mpath_clear_current_path() is nvme_ns_remove() which holds the subsys lock so it's likely a false positive, but when using rcu_access_pointer(), we're telling rcu and lockdep that we're only after the pointer falue. Fixes: 32acab31 ("nvme: implement multipath access to nvme subsystems") Signed-off-by:Johannes Thumshirn <jthumshirn@suse.de> Suggested-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by:
-
- 22 May, 2018 3 commits
-
-
Bart Van Assche authored
Avoid that complaints similar to the following appear in the kernel log if the number of zones is sufficiently large: fio: page allocation failure: order:9, mode:0x140c0c0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null) Call Trace: dump_stack+0x63/0x88 warn_alloc+0xf5/0x190 __alloc_pages_slowpath+0x8f0/0xb0d __alloc_pages_nodemask+0x242/0x260 alloc_pages_current+0x6a/0xb0 kmalloc_order+0x18/0x50 kmalloc_order_trace+0x26/0xb0 __kmalloc+0x20e/0x220 blkdev_report_zones_ioctl+0xa5/0x1a0 blkdev_ioctl+0x1ba/0x930 block_ioctl+0x41/0x50 do_vfs_ioctl+0xaa/0x610 SyS_ioctl+0x79/0x90 do_syscall_64+0x79/0x1b0 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Fixes: 3ed05a98 ("blk-zoned: implement ioctls") Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: Shaun Tancheff <shaun.tancheff@seagate.com> Cc: Damien Le Moal <damien.lemoal@hgst.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Hannes Reinecke <hare@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Dan Melnic authored
Add WQ_UNBOUND to the knbd-recv workqueue so we're not bound to a single CPU that is selected at device creation time. Signed-off-by:
Dan Melnic <dmm@fb.com> Reviewed-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
-
huhai authored
When dispatch_rq_from_ctx is called, in the vast majority of cases the ctx->rq_list is not empty. Signed-off-by:
huhai <huhai@kylinos.cn> Signed-off-by:
-
- 21 May, 2018 2 commits
-
-
Jens Axboe authored
If polling completions are racing with the IRQ triggered by a completion, the IRQ handler will find no work and return IRQ_NONE. This can trigger complaints about spurious interrupts: [ 560.169153] irq 630: nobody cared (try booting with the "irqpoll" option) [ 560.175988] CPU: 40 PID: 0 Comm: swapper/40 Not tainted 4.17.0-rc2+ #65 [ 560.175990] Hardware name: Intel Corporation S2600STB/S2600STB, BIOS SE5C620.86B.00.01.0010.010920180151 01/09/2018 [ 560.175991] Call Trace: [ 560.175994] <IRQ> [ 560.176005] dump_stack+0x5c/0x7b [ 560.176010] __report_bad_irq+0x30/0xc0 [ 560.176013] note_interrupt+0x235/0x280 [ 560.176020] handle_irq_event_percpu+0x51/0x70 [ 560.176023] handle_irq_event+0x27/0x50 [ 560.176026] handle_edge_irq+0x6d/0x180 [ 560.176031] handle_irq+0xa5/0x110 [ 560.176036] do_IRQ+0x41/0xc0 [ 560.176042] common_interrupt+0xf/0xf [ 560.176043] </IRQ> [ 560.176050] RIP: 0010:cpuidle_enter_state+0x9b/0x2b0 [ 560.176052] RSP: 0018:ffffa0ed4659fe98 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffdd [ 560.176055] RAX: ffff9527beb20a80 RBX: 000000826caee491 RCX: 000000000000001f [ 560.176056] RDX: 000000826caee491 RSI: 00000000335206ee RDI: 0000000000000000 [ 560.176057] RBP: 0000000000000001 R08: 00000000ffffffff R09: 0000000000000008 [ 560.176059] R10: ffffa0ed4659fe78 R11: 0000000000000001 R12: ffff9527beb29358 [ 560.176060] R13: ffffffffa235d4b8 R14: 0000000000000000 R15: 000000826caed593 [ 560.176065] ? cpuidle_enter_state+0x8b/0x2b0 [ 560.176071] do_idle+0x1f4/0x260 [ 560.176075] cpu_startup_entry+0x6f/0x80 [ 560.176080] start_secondary+0x184/0x1d0 [ 560.176085] secondary_startup_64+0xa5/0xb0 [ 560.176088] handlers: [ 560.178387] [<00000000efb612be>] nvme_irq [nvme] [ 560.183019] Disabling IRQ #630 A previous commit removed ->cqe_seen that was handling this case, but we need to handle this a bit differently due to completions now running outside the queue lock. Return IRQ_HANDLED from the IRQ handler, if the completion ring head was moved since we last saw it. Fixes: 5cb525c8 ("nvme-pci: handle completions outside of the queue lock") Reported-by:
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe changes from Keith: "This is just the first nvme pull request for 4.18. There are several fabrics and target patches that I missed, so there will be more to come." * 'nvme-4.18' of git://git.infradead.org/nvme: nvme-pci: drop IRQ disabling on submission queue lock nvme-pci: split the nvme queue lock into submission and completion locks nvme-pci: handle completions outside of the queue lock nvme-pci: move ->cq_vector == -1 check outside of ->q_lock nvme-pci: remove cq check after submission nvme-pci: simplify nvme_cqe_valid nvme: mark the result argument to nvme_complete_async_event volatile nvme/pci: Sync controller reset for AER slot_reset nvme/pci: Hold controller reference during async probe nvme: only reconfigure discard if necessary nvme/pci: Use async_schedule for initial reset work nvme: lightnvm: add granby support NVMe: Add Quirk Delay before CHK RDY for Seagate Nytro Flash Storage nvme: change order of qid and cmdid in completion trace nvme: fc: provide a descriptive error
-
- 18 May, 2018 8 commits
-
-
Jens Axboe authored
Since we aren't sharing the lock for completions now, we don't have to make it IRQ safe. Reviewed-by:
-
Jens Axboe authored
This is now feasible. We protect the submission queue ring with ->sq_lock, and the completion side with ->cq_lock. Reviewed-by:
-
Jens Axboe authored
Split the completion of events into a two part process: 1) Reap the events inside the queue lock 2) Complete the events outside the queue lock Since we never wrap the queue, we can access it locklessly after we've updated the completion queue head. This patch started off with batching events on the stack, but with this trick we don't have to. Keith Busch <keith.busch@intel.com> came up with that idea. Note that this kills the ->cqe_seen as well. I haven't been able to trigger any ill effects of this. If we do race with polling every so often, it should be rare enough NOT to trigger any issues. Signed-off-by:
-
Jens Axboe authored
We only clear it dynamically in nvme_suspend_queue(). When we do, ensure to do a full flush so that any nvme_queue_rq() invocation will see it. Ideally we'd kill this check completely, but we're using it to flush requests on a dying queue. Signed-off-by:
-
Jens Axboe authored
We always check the completion queue after submitting, but in my testing this isn't a win even on DRAM/xpoint devices. In some cases it's actually worse. Kill it. Signed-off-by:
-
Christoph Hellwig authored
We always look at the current CQ head and phase, so don't pass these as separate arguments, and rename the function to nvme_cqe_pending. Signed-off-by:
-
Christoph Hellwig authored
We'll need that in the PCIe driver soon as we'll read it straight off the CQ. Signed-off-by: -
huhai authored
When the number of hardware queues is changed, the drivers will call blk_mq_update_nr_hw_queues() to remap hardware queues. This changes the ctx mappings, but the current code doesn't clear the ->dispatch_from hint. This can result in dispatch_from pointing to a ctx that isn't mapped to the hctx anymore. Fixes: b347689f ("blk-mq-sched: improve dispatching from sw queue") Signed-off-by:
Ming Lei <ming.lei@redhat.com> Moved the placement of the clearing to where we clear other items pertaining to the existing mapping, added Fixes line, and reworded the commit message. Signed-off-by:
-
- 16 May, 2018 8 commits
-
-
Josef Bacik authored
We need to make sure we don't just set the size of the bdev to 0 while it's being used by a file system. We have the appropriate check in nbd_bdev_reset, simply use that helper instead. Signed-off-by:
-
Josef Bacik authored
bd_invalidated is kind of a pain wrt partitions as it really only triggers the partition rescan if it is set after bd_ops->open() runs, so setting it when we reset the device isn't useful. We also sporadically would still have partitions left over in some disconnect cases, so fix this by always setting bd_invalidated on open if there's no configuration or if we've had a disconnect action happen, that way the partition table gets invalidated and rescanned properly. Signed-off-by:
-
Josef Bacik authored
This is what the ioctl based nbd disconnect does as well. Without this the device will just sit there and wait for the connection to go away (or IO to occur) before the device gets torn down. Instead clear everything up on our end so the configuration goes away as quickly as possible. Signed-off-by:
-
Josef Bacik authored
When we stopped relying on the bdev everywhere I broke updating the block device size on the fly, which ceph relies on. We can't just do set_capacity, we also have to do bd_set_size so things like parted will notice the device size change. Fixes: 29eaadc0 ("nbd: stop using the bdev everywhere") cc: stable@vger.kernel.org Signed-off-by:
-
Josef Bacik authored
I messed up changing the size of an NBD device while it was connected by not actually updating the device or doing the uevent. Fix this by updating everything if we're connected and we change the size. cc: stable@vger.kernel.org Fixes: 639812a1 ("nbd: don't set the device size until we're connected") Signed-off-by:
-
Josef Bacik authored
This fixes a use after free bug, we shouldn't be doing disk->queue right after we do del_gendisk(disk). Save the queue and do the cleanup after the del_gendisk. Fixes: c6a4759e ("nbd: add device refcounting") cc: stable@vger.kernel.org Signed-off-by:
-
Josef Bacik authored
I've been missing stuff because it's been going into my work email which is a black hole. Update to the email I actually use so I stop missing patches and bug reports. Signed-off-by:
-
huhai authored
We can use blk_mq_sched_insert_request() even if we don't have an IO scheduler attached, since that case will end up being exactly the same as what blk_mq_queue_io() was doing now. Signed-off-by:
-
- 15 May, 2018 1 commit
-
-
Jens Axboe authored
Nobody is using it anymore, and it's been abandoned. Since David is fine with removing it, kill it. Suggested-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
- 14 May, 2018 11 commits
-
-
Kent Overstreet authored
Signed-off-by:
Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by:
-
Kent Overstreet authored
Signed-off-by:
-
Kent Overstreet authored
Recently found a bug where a driver left bi_next not NULL and then called bio_endio(), and then the submitter of the bio used bio_copy_data() which was treating src and dst as lists of bios. Fixed that bug by splitting out bio_list_copy_data(), but in case other things are depending on bi_next in weird ways, add a warning to help avoid more bugs like that in the future. Signed-off-by:
-
Kent Overstreet authored
Since a bio can point to userspace pages (e.g. direct IO), this is generally necessary. Signed-off-by:
-
Kent Overstreet authored
Found a bug (with ASAN) where we were passing a bio to bio_copy_data() with bi_next not NULL, when it should have been - a driver had left bi_next set to something after calling bio_endio(). Since the normal case is only copying single bios, split out bio_list_copy_data() to avoid more bugs like this in the future. Signed-off-by:
-
Kent Overstreet authored
Add versions that take bvec_iter args instead of using bio->bi_iter - to be used by bcachefs. Signed-off-by:
-
Kent Overstreet authored
Minor optimization - remove a pointer indirection when using fs_bio_set. Signed-off-by:
-
Kent Overstreet authored
Similarly to mempool_init()/mempool_exit(), take a pointer indirection out of allocation/freeing by allowing biosets to be embedded in other structs. Signed-off-by:
-
Kent Overstreet authored
Minor performance improvement by getting rid of pointer indirections from allocation/freeing fastpaths. Signed-off-by:
-
Kent Overstreet authored
Allows mempools to be embedded in other structs, getting rid of a pointer indirection from allocation fastpaths. mempool_exit() is safe to call on an uninitialized but zeroed mempool. Signed-off-by:
-
Jens Axboe authored
If we have multiple callers of sbq_wake_up(), we can end up in a situation where the wait_cnt will continually go more and more negative. Consider the case where our wake batch is 1, hence wait_cnt will start out as 1. wait_cnt == 1 CPU0 CPU1 atomic_dec_return(), cnt == 0 atomic_dec_return(), cnt == -1 cmpxchg(-1, 0) (succeeds) [wait_cnt now 0] cmpxchg(0, 1) (fails) This ends up with wait_cnt being 0, we'll wakeup immediately next time. Going through the same loop as above again, and we'll have wait_cnt -1. For the case where we have a larger wake batch, the only difference is that the starting point will be higher. We'll still end up with continually smaller batch wakeups, which defeats the purpose of the rolling wakeups. Always reset the wait_cnt to the batch value. Then it doesn't matter who wins the race. But ensure that whomever does win the race is the one that increments the ws index and wakes up our batch count, loser gets to call __sbq_wake_up() again to account his wakeups towards the next active wait state index. Fixes: 6c0ca7ae ("sbitmap: fix wakeup hang after sbq resize") Reviewed-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
-
