- 20 May, 2017 40 commits
-
-
Greg Kroah-Hartman authored
-
Kees Cook authored
commit 6330d553 upstream. When built as a module and running with update_ms >= 0, pstore will Oops during module unload since the work timer is still running. This makes sure the worker is stopped before unloading. Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kees Cook authored
commit e9a330c4 upstream. The per-prz spinlock should be using the dynamic initializer so that lockdep can correctly track it. Without this, under lockdep, we get a warning at boot that the lock is in non-static memory. Fixes: 10970449 ("pstore: Make spinlock per zone instead of global") Fixes: 76d5692a ("pstore: Correctly initialize spinlock and flags") Signed-off-by:
-
Ankit Kumar authored
commit 041939c1 upstream. After commit c950fd6f kernel registers pstore write based on flag set. Pstore write for powerpc is broken as flags(PSTORE_FLAGS_DMESG) is not set for powerpc architecture. On panic, kernel doesn't write message to /fs/pstore/dmesg*(Entry doesn't gets created at all). This patch enables pstore write for powerpc architecture by setting PSTORE_FLAGS_DMESG flag. Fixes: c950fd6f ("pstore: Split pstore fragile flags") Signed-off-by:
Ankit Kumar <ankit@linux.vnet.ibm.com> Signed-off-by:
-
Dan Williams authored
commit d5483fed upstream. Fix failures to create namespaces due to the vmem_altmap not advertising enough free space to store the memmap. WARNING: CPU: 15 PID: 8022 at arch/x86/mm/init_64.c:656 arch_add_memory+0xde/0xf0 [..] Call Trace: dump_stack+0x63/0x83 __warn+0xcb/0xf0 warn_slowpath_null+0x1d/0x20 arch_add_memory+0xde/0xf0 devm_memremap_pages+0x244/0x440 pmem_attach_disk+0x37e/0x490 [nd_pmem] nd_pmem_probe+0x7e/0xa0 [nd_pmem] nvdimm_bus_probe+0x71/0x120 [libnvdimm] driver_probe_device+0x2bb/0x460 bind_store+0x114/0x160 drv_attr_store+0x25/0x30 In commit 658922e5 "libnvdimm, pfn: fix memmap reservation sizing" we arranged for the capacity to be allocated, but failed to also update the 'npfns' parameter. This leads to cases where there is enough capacity reserved to hold all the allocated sections, but vmemmap_populate_hugepages() still encounters -ENOMEM from altmap_alloc_block_buf(). This fix is a stop-gap until we can teach the core memory hotplug implementation to permit sub-section hotplug. Fixes: 658922e5 ("libnvdimm, pfn: fix memmap reservation sizing") Reported-by:
Anisha Allada <anisha.allada@intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Dan Williams authored
commit 452bae0a upstream. A debug patch to turn the standard device_lock() into something that lockdep can analyze yielded the following: ====================================================== [ INFO: possible circular locking dependency detected ] 4.11.0-rc4+ #106 Tainted: G O ------------------------------------------------------- lt-libndctl/1898 is trying to acquire lock: (&dev->nvdimm_mutex/3){+.+.+.}, at: [<ffffffffc023c948>] nd_attach_ndns+0x178/0x1b0 [libnvdimm] but task is already holding lock: (&nvdimm_bus->reconfig_mutex){+.+.+.}, at: [<ffffffffc022e0b1>] nvdimm_bus_lock+0x21/0x30 [libnvdimm] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&nvdimm_bus->reconfig_mutex){+.+.+.}: lock_acquire+0xf6/0x1f0 __mutex_lock+0x88/0x980 mutex_lock_nested+0x1b/0x20 nvdimm_bus_lock+0x21/0x30 [libnvdimm] nvdimm_namespace_capacity+0x1b/0x40 [libnvdimm] nvdimm_namespace_common_probe+0x230/0x510 [libnvdimm] nd_pmem_probe+0x14/0x180 [nd_pmem] nvdimm_bus_probe+0xa9/0x260 [libnvdimm] -> #0 (&dev->nvdimm_mutex/3){+.+.+.}: __lock_acquire+0x1107/0x1280 lock_acquire+0xf6/0x1f0 __mutex_lock+0x88/0x980 mutex_lock_nested+0x1b/0x20 nd_attach_ndns+0x178/0x1b0 [libnvdimm] nd_namespace_store+0x308/0x3c0 [libnvdimm] namespace_store+0x87/0x220 [libnvdimm] In this case '&dev->nvdimm_mutex/3' mirrors '&dev->mutex'. Fix this by replacing the use of device_lock() with nvdimm_bus_lock() to protect nd_{attach,detach}_ndns() operations. Fixes: 8c2f7e86 ("libnvdimm: infrastructure for btt devices") Reported-by:
Yi Zhang <yizhan@redhat.com> Signed-off-by:
-
Toshi Kani authored
commit b2518c78 upstream. The following BUG was observed when nd_pmem_notify() was called for a BTT device. The use of a pmem_device pointer is not valid with BTT. BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 IP: nd_pmem_notify+0x30/0xf0 [nd_pmem] Call Trace: nd_device_notify+0x40/0x50 child_notify+0x10/0x20 device_for_each_child+0x50/0x90 nd_region_notify+0x20/0x30 nd_device_notify+0x40/0x50 nvdimm_region_notify+0x27/0x30 acpi_nfit_scrub+0x341/0x590 [nfit] process_one_work+0x197/0x450 worker_thread+0x4e/0x4a0 kthread+0x109/0x140 Fix nd_pmem_notify() by setting nd_region and badblocks pointers properly for BTT. Cc: Vishal Verma <vishal.l.verma@intel.com> Fixes: 71999466 ("libnvdimm: async notification support") Signed-off-by:
Toshi Kani <toshi.kani@hpe.com> Signed-off-by:
-
Dan Williams authored
commit bc042fdf upstream. In the case where a dimm does not have any associated flush hints the ndrd->flush_wpq array may be uninitialized leading to crashes with the following signature: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: region_visible+0x10f/0x160 [libnvdimm] Call Trace: internal_create_group+0xbe/0x2f0 sysfs_create_groups+0x40/0x80 device_add+0x2d8/0x650 nd_async_device_register+0x12/0x40 [libnvdimm] async_run_entry_fn+0x39/0x170 process_one_work+0x212/0x6c0 ? process_one_work+0x197/0x6c0 worker_thread+0x4e/0x4a0 kthread+0x10c/0x140 ? process_one_work+0x6c0/0x6c0 ? kthread_create_on_node+0x60/0x60 ret_from_fork+0x31/0x40 Reviewed-by:
Jeff Moyer <jmoyer@redhat.com> Fixes: f284a4f2 ("libnvdimm: introduce nvdimm_flush() and nvdimm_has_flush()") Signed-off-by:
-
Joeseph Chang authored
commit 6de65fcf upstream. msg_written_handler() may set ssif_info->multi_data to NULL when using ipmitool to write fru. Before setting ssif_info->multi_data to NULL, add new local pointer "data_to_send" and store correct i2c data pointer to it to fix NULL pointer kernel panic and incorrect ssif_info->multi_pos. Signed-off-by:
Joeseph Chang <joechang@codeaurora.org> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
-
Christoph Hellwig authored
commit c6ade20f upstream. The WRITE SAME to TRIM translation rewrites the DATA OUT buffer. While the SCSI code accomodates for this by passing a read-writable buffer userspace applications don't cater for this behavior. In fact it can be used to rewrite e.g. a readonly file through mmap and should be considered as a security fix. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Tejun Heo authored
commit a590b90d upstream. cgroup_get() expected to be called only on live cgroups and triggers warning on a dead cgroup; however, cgroup_sk_alloc() may be called while cloning a socket which is left in an empty and removed cgroup and thus may legitimately duplicate its reference on a dead cgroup. This currently triggers the following warning spuriously. WARNING: CPU: 14 PID: 0 at kernel/cgroup.c:490 cgroup_get+0x55/0x60 ... [<ffffffff8107e123>] __warn+0xd3/0xf0 [<ffffffff8107e20e>] warn_slowpath_null+0x1e/0x20 [<ffffffff810ff465>] cgroup_get+0x55/0x60 [<ffffffff81106061>] cgroup_sk_alloc+0x51/0xe0 [<ffffffff81761beb>] sk_clone_lock+0x2db/0x390 [<ffffffff817cce06>] inet_csk_clone_lock+0x16/0xc0 [<ffffffff817e8173>] tcp_create_openreq_child+0x23/0x4b0 [<ffffffff818601a1>] tcp_v6_syn_recv_sock+0x91/0x670 [<ffffffff817e8b16>] tcp_check_req+0x3a6/0x4e0 [<ffffffff81861ba3>] tcp_v6_rcv+0x693/0xa00 [<ffffffff81837429>] ip6_input_finish+0x59/0x3e0 [<ffffffff81837cb2>] ip6_input+0x32/0xb0 [<ffffffff81837387>] ip6_rcv_finish+0x57/0xa0 [<ffffffff81837ac8>] ipv6_rcv+0x318/0x4d0 [<ffffffff817778c7>] __netif_receive_skb_core+0x2d7/0x9a0 [<ffffffff81777fa6>] __netif_receive_skb+0x16/0x70 [<ffffffff81778023>] netif_receive_skb_internal+0x23/0x80 [<ffffffff817787d8>] napi_gro_frags+0x208/0x270 [<ffffffff8168a9ec>] mlx4_en_process_rx_cq+0x74c/0xf40 [<ffffffff8168b270>] mlx4_en_poll_rx_cq+0x30/0x90 [<ffffffff81778b30>] net_rx_action+0x210/0x350 [<ffffffff8188c426>] __do_softirq+0x106/0x2c7 [<ffffffff81082bad>] irq_exit+0x9d/0xa0 [<ffffffff8188c0e4>] do_IRQ+0x54/0xd0 [<ffffffff8188a63f>] common_interrupt+0x7f/0x7f <EOI> [<ffffffff8173d7e7>] cpuidle_enter+0x17/0x20 [<ffffffff810bdfd9>] cpu_startup_entry+0x2a9/0x2f0 [<ffffffff8103edd1>] start_secondary+0xf1/0x100 This patch renames the existing cgroup_get() with the dead cgroup warning to cgroup_get_live() after cgroup_kn_lock_live() and introduces the new cgroup_get() which doesn't check whether the cgroup is live or dead. All existing cgroup_get() users except for cgroup_sk_alloc() are converted to use cgroup_get_live(). Fixes: d979a39d ("cgroup: duplicate cgroup reference when cloning sockets") Cc: Johannes Weiner <hannes@cmpxchg.org> Reported-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Johan Hovold authored
commit dcb9cfaa upstream. Make sure to check the tty-device pointer before looking up the sibling platform device to avoid dereferencing a NULL-pointer when the tty is one end of a Unix98 pty. Fixes: 74cdad37 ("Bluetooth: hci_intel: Add runtime PM support") Fixes: 1ab1f239 ("Bluetooth: hci_intel: Add support for platform driver") Cc: Loic Poulain <loic.poulain@intel.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Johan Hovold authored
commit 95065a61 upstream. Make sure to check the tty-device pointer before looking up the sibling platform device to avoid dereferencing a NULL-pointer when the tty is one end of a Unix98 pty. Fixes: 0395ffc1 ("Bluetooth: hci_bcm: Add PM for BCM devices") Cc: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by:
-
Szymon Janc authored
commit ab89f0bd upstream. Running 32bit userspace on 64bit kernel results in MSG_CMSG_COMPAT being defined as 0x80000000. This results in sendmsg failure if used from 32bit userspace running on 64bit kernel. Fix this by accounting for MSG_CMSG_COMPAT in flags check in hci_sock_sendmsg. Signed-off-by:
Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by:
Marko Kiiskila <marko@runtime.io> Signed-off-by:
-
Timur Tabi authored
commit 5a0722b8 upstream. Define a new early console name for Qualcomm Datacenter Technologies QDF2400 SOCs affected by erratum 44, instead of piggy-backing on "pl011". Previously, to enable traditional (non-SPCR) earlycon, the documentation said to specify "earlycon=pl011,<address>,qdf2400_e44", but the code was broken and this didn't actually work. So instead, the method for specifying the E44 work-around with traditional earlycon is "earlycon=qdf2400_e44,<address>". Both methods of earlycon are now enabled with the same function. Fixes: e53e597f ("tty: pl011: fix earlycon work-around for QDF2400 erratum 44") Signed-off-by:
Timur Tabi <timur@codeaurora.org> Tested-by:
Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by:
-
Wang YanQing authored
commit 77dae613 upstream. While using emacs, cat or others' commands in konsole with recent kernels, I have met many times that CTRL-C freeze konsole. After konsole freeze I can't type anything, then I have to open a new one, it is very annoying. See bug report: https://bugs.kde.org/show_bug.cgi?id=175283 The platform in that bug report is Solaris, but now the pty in linux has the same problem or the same behavior as Solaris :) It has high possibility to trigger the problem follow steps below: Note: In my test, BigFile is a text file whose size is bigger than 1G 1:open konsole 1:cat BigFile 2:CTRL-C After some digging, I find out the reason is that commit 1d1d14da ("pty: Fix buffer flush deadlock") changes the behavior of pty_flush_buffer. Thread A Thread B -------- -------- 1:n_tty_poll return POLLIN 2:CTRL-C trigger pty_flush_buffer tty_buffer_flush n_tty_flush_buffer 3:attempt to check count of chars: ioctl(fd, TIOCINQ, &available) available is equal to 0 4:read(fd, buffer, avaiable) return 0 5:konsole close fd Yes, I know we could use the same patch included in the BUG report as a workaround for linux platform too. But I think the data in ldisc is belong to application of another side, we shouldn't clear it when we want to flush write buffer of this side in pty_flush_buffer. So I think it is better to disable ldisc flush in pty_flush_buffer, because its new hehavior bring no benefit except that it mess up the behavior between POLLIN, and TIOCINQ or FIONREAD. Also I find no flush_buffer function in others' tty driver has the same behavior as current pty_flush_buffer. Fixes: 1d1d14da ("pty: Fix buffer flush deadlock") Signed-off-by:
Wang YanQing <udknight@gmail.com> Signed-off-by:
-
Johan Hovold authored
commit 77e6fe7f upstream. Make sure to actually suspend the device before returning after a failed (or deferred) probe. Note that autosuspend must be disabled before runtime pm is disabled in order to balance the usage count due to a negative autosuspend delay as well as to make the final put suspend the device synchronously. Fixes: 388bc262 ("omap-serial: Fix the error handling in the omap_serial probe") Cc: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Johan Hovold authored
commit 099bd73d upstream. An unbalanced and misplaced synchronous put was used to suspend the device on driver unbind, something which with a likewise misplaced pm_runtime_disable leads to external aborts when an open port is being removed. Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa024010 ... [<c046e760>] (serial_omap_set_mctrl) from [<c046a064>] (uart_update_mctrl+0x50/0x60) [<c046a064>] (uart_update_mctrl) from [<c046a400>] (uart_shutdown+0xbc/0x138) [<c046a400>] (uart_shutdown) from [<c046bd2c>] (uart_hangup+0x94/0x190) [<c046bd2c>] (uart_hangup) from [<c045b760>] (__tty_hangup+0x404/0x41c) [<c045b760>] (__tty_hangup) from [<c045b794>] (tty_vhangup+0x1c/0x20) [<c045b794>] (tty_vhangup) from [<c046ccc8>] (uart_remove_one_port+0xec/0x260) [<c046ccc8>] (uart_remove_one_port) from [<c046ef4c>] (serial_omap_remove+0x40/0x60) [<c046ef4c>] (serial_omap_remove) from [<c04845e8>] (platform_drv_remove+0x34/0x4c) Fix this up by resuming the device before deregistering the port and by suspending and disabling runtime pm only after the port has been removed. Also make sure to disable autosuspend before disabling runtime pm so that the usage count is balanced and device actually suspended before returning. Note that due to a negative autosuspend delay being set in probe, the unbalanced put would actually suspend the device on first driver unbind, while rebinding and again unbinding would result in a negative power.usage_count. Fixes: 7e9c8e7d ("serial: omap: make sure to suspend device before remove") Cc: Felipe Balbi <balbi@kernel.org> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by:
-
Marek Szyprowski authored
commit 500fcc08 upstream. This patch adds missing checks for dma_map_single() failure and proper error reporting. Although this issue was harmless on ARM architecture, it is always good to use the DMA mapping API in a proper way. This patch fixes the following DMA API debug warning: WARNING: CPU: 1 PID: 3785 at lib/dma-debug.c:1171 check_unmap+0x8a0/0xf28 dma-pl330 121a0000.pdma: DMA-API: device driver failed to check map error[device address=0x000000006e0f9000] [size=4096 bytes] [mapped as single] Modules linked in: CPU: 1 PID: 3785 Comm: (agetty) Tainted: G W 4.11.0-rc1-00137-g07ca963-dirty #59 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c011aaa4>] (unwind_backtrace) from [<c01127c0>] (show_stack+0x20/0x24) [<c01127c0>] (show_stack) from [<c06ba5d8>] (dump_stack+0x84/0xa0) [<c06ba5d8>] (dump_stack) from [<c0139528>] (__warn+0x14c/0x180) [<c0139528>] (__warn) from [<c01395a4>] (warn_slowpath_fmt+0x48/0x50) [<c01395a4>] (warn_slowpath_fmt) from [<c072a114>] (check_unmap+0x8a0/0xf28) [<c072a114>] (check_unmap) from [<c072a834>] (debug_dma_unmap_page+0x98/0xc8) [<c072a834>] (debug_dma_unmap_page) from [<c0803874>] (s3c24xx_serial_shutdown+0x314/0x52c) [<c0803874>] (s3c24xx_serial_shutdown) from [<c07f5124>] (uart_port_shutdown+0x54/0x88) [<c07f5124>] (uart_port_shutdown) from [<c07f522c>] (uart_shutdown+0xd4/0x110) [<c07f522c>] (uart_shutdown) from [<c07f6a8c>] (uart_hangup+0x9c/0x208) [<c07f6a8c>] (uart_hangup) from [<c07c426c>] (__tty_hangup+0x49c/0x634) [<c07c426c>] (__tty_hangup) from [<c07c78ac>] (tty_ioctl+0xc88/0x16e4) [<c07c78ac>] (tty_ioctl) from [<c03b5f2c>] (do_vfs_ioctl+0xc4/0xd10) [<c03b5f2c>] (do_vfs_ioctl) from [<c03b6bf4>] (SyS_ioctl+0x7c/0x8c) [<c03b6bf4>] (SyS_ioctl) from [<c010b4a0>] (ret_fast_syscall+0x0/0x3c) Reported-by:
Seung-Woo Kim <sw0312.kim@samsung.com> Fixes: 62c37eed ("serial: samsung: add dma reqest/release functions") Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Marek Szyprowski authored
commit 768d64f4 upstream. Driver should provide its own struct device for all DMA-mapping calls instead of extracting device pointer from DMA engine channel. Although this is harmless from the driver operation perspective on ARM architecture, it is always good to use the DMA mapping API in a proper way. This patch fixes following DMA API debug warning: WARNING: CPU: 0 PID: 0 at lib/dma-debug.c:1241 check_sync+0x520/0x9f4 samsung-uart 12c20000.serial: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x000000006df0f580] [size=64 bytes] Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.11.0-rc1-00137-g07ca963 #51 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c011aaa4>] (unwind_backtrace) from [<c01127c0>] (show_stack+0x20/0x24) [<c01127c0>] (show_stack) from [<c06ba5d8>] (dump_stack+0x84/0xa0) [<c06ba5d8>] (dump_stack) from [<c0139528>] (__warn+0x14c/0x180) [<c0139528>] (__warn) from [<c01395a4>] (warn_slowpath_fmt+0x48/0x50) [<c01395a4>] (warn_slowpath_fmt) from [<c0729058>] (check_sync+0x520/0x9f4) [<c0729058>] (check_sync) from [<c072967c>] (debug_dma_sync_single_for_device+0x88/0xc8) [<c072967c>] (debug_dma_sync_single_for_device) from [<c0803c10>] (s3c24xx_serial_start_tx_dma+0x100/0x2f8) [<c0803c10>] (s3c24xx_serial_start_tx_dma) from [<c0804338>] (s3c24xx_serial_tx_chars+0x198/0x33c) Reported-by:
Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by:
-
Eric Biggers authored
commit 6b06cdee upstream. When accessing an encrypted directory without the key, userspace must operate on filenames derived from the ciphertext names, which contain arbitrary bytes. Since we must support filenames as long as NAME_MAX, we can't always just base64-encode the ciphertext, since that may make it too long. Currently, this is solved by presenting long names in an abbreviated form containing any needed filesystem-specific hashes (e.g. to identify a directory block), then the last 16 bytes of ciphertext. This needs to be sufficient to identify the actual name on lookup. However, there is a bug. It seems to have been assumed that due to the use of a CBC (ciphertext block chaining)-based encryption mode, the last 16 bytes (i.e. the AES block size) of ciphertext would depend on the full plaintext, preventing collisions. However, we actually use CBC with ciphertext stealing (CTS), which handles the last two blocks specially, causing them to appear "flipped". Thus, it's actually the second-to-last block which depends on the full plaintext. This caused long filenames that differ only near the end of their plaintexts to, when observed without the key, point to the wrong inode and be undeletable. For example, with ext4: # echo pass | e4crypt add_key -p 16 edir/ # seq -f "edir/abcdefghijklmnopqrstuvwxyz012345%.0f" 100000 | xargs touch # find edir/ -type f | xargs stat -c %i | sort | uniq | wc -l 100000 # sync # echo 3 > /proc/sys/vm/drop_caches # keyctl new_session # find edir/ -type f | xargs stat -c %i | sort | uniq | wc -l 2004 # rm -rf edir/ rm: cannot remove 'edir/_A7nNFi3rhkEQlJ6P,hdzluhODKOeWx5V': Structure needs cleaning ... To fix this, when presenting long encrypted filenames, encode the second-to-last block of ciphertext rather than the last 16 bytes. Although it would be nice to solve this without depending on a specific encryption mode, that would mean doing a cryptographic hash like SHA-256 which would be much less efficient. This way is sufficient for now, and it's still compatible with encryption modes like HEH which are strong pseudorandom permutations. Also, changing the presented names is still allowed at any time because they are only provided to allow applications to do things like delete encrypted directories. They're not designed to be used to persistently identify files --- which would be hard to do anyway, given that they're encrypted after all. For ease of backports, this patch only makes the minimal fix to both ext4 and f2fs. It leaves ubifs as-is, since ubifs doesn't compare the ciphertext block yet. Follow-on patches will clean things up properly and make the filesystems use a shared helper function. Fixes: 5de0b4d0 ("ext4 crypto: simplify and speed up filename encryption") Reported-by:
Gwendal Grignou <gwendal@chromium.org> Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Eric Biggers authored
commit 272f98f6 upstream. To mitigate some types of offline attacks, filesystem encryption is designed to enforce that all files in an encrypted directory tree use the same encryption policy (i.e. the same encryption context excluding the nonce). However, the fscrypt_has_permitted_context() function which enforces this relies on comparing struct fscrypt_info's, which are only available when we have the encryption keys. This can cause two incorrect behaviors: 1. If we have the parent directory's key but not the child's key, or vice versa, then fscrypt_has_permitted_context() returned false, causing applications to see EPERM or ENOKEY. This is incorrect if the encryption contexts are in fact consistent. Although we'd normally have either both keys or neither key in that case since the master_key_descriptors would be the same, this is not guaranteed because keys can be added or removed from keyrings at any time. 2. If we have neither the parent's key nor the child's key, then fscrypt_has_permitted_context() returned true, causing applications to see no error (or else an error for some other reason). This is incorrect if the encryption contexts are in fact inconsistent, since in that case we should deny access. To fix this, retrieve and compare the fscrypt_contexts if we are unable to set up both fscrypt_infos. While this slightly hurts performance when accessing an encrypted directory tree without the key, this isn't a case we really need to be optimizing for; access *with* the key is much more important. Furthermore, the performance hit is barely noticeable given that we are already retrieving the fscrypt_context and doing two keyring searches in fscrypt_get_encryption_info(). If we ever actually wanted to optimize this case we might start by caching the fscrypt_contexts. Signed-off-by:
-
Linus Torvalds authored
commit 394e4f5d upstream. Commit 17a9be31 ("initramfs: Always do fput() and load modules after rootfs populate") introduced an error for the CONFIG_BLK_DEV_RAM=y case, because even though the code looks fine, the compiler really wants a statement after a label, or you'll get complaints: init/initramfs.c: In function 'populate_rootfs': init/initramfs.c:644:2: error: label at end of compound statement That commit moved the subsequent statements to outside the compound statement, leaving the label without any associated statements. Reported-by:
Jörg Otte <jrg.otte@gmail.com> Fixes: 17a9be31 ("initramfs: Always do fput() and load modules after rootfs populate") Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Stafford Horne authored
commit 17a9be31 upstream. In OpenRISC we do not have a bootloader passed initrd, but the built in initramfs does contain the /init and other binaries, including modules. The previous commit 08865514 ("initramfs: finish fput() before accessing any binary from initramfs") made a change to only call fput() if the bootloader initrd was available, this caused intermittent crashes for OpenRISC. This patch changes the fput() to happen unconditionally if any rootfs is loaded. Also, I added some comments to make it a bit more clear why we call unpack_to_rootfs() multiple times. Fixes: 08865514 ("initramfs: finish fput() before accessing any binary from initramfs") Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Stafford Horne <shorne@gmail.com> Signed-off-by:
-
Jan Kara authored
commit 3adc5fcb upstream. Commit b685d3d6 "block: treat REQ_FUA and REQ_PREFLUSH as synchronous" removed REQ_SYNC flag from WRITE_{FUA|PREFLUSH|...} definitions. generic_make_request_checks() however strips REQ_FUA and REQ_PREFLUSH flags from a bio when the storage doesn't report volatile write cache and thus write effectively becomes asynchronous which can lead to performance regressions. Fix the problem by making sure all bios which are synchronous are properly marked with REQ_SYNC. Fixes: b685d3d6 CC: Jaegeuk Kim <jaegeuk@kernel.org> CC: linux-f2fs-devel@lists.sourceforge.net Signed-off-by:
Jan Kara <jack@suse.cz> Acked-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Jaegeuk Kim authored
commit 6332cd32 upstream. If user has no key under an encrypted dir, fscrypt gives digested dentries. Previously, when looking up a dentry, f2fs only checks its hash value with first 4 bytes of the digested dentry, which didn't handle hash collisions fully. This patch enhances to check entire dentry bytes likewise ext4. Eric reported how to reproduce this issue by: # seq -f "edir/abcdefghijklmnopqrstuvwxyz012345%.0f" 100000 | xargs touch # find edir -type f | xargs stat -c %i | sort | uniq | wc -l 100000 # sync # echo 3 > /proc/sys/vm/drop_caches # keyctl new_session # find edir -type f | xargs stat -c %i | sort | uniq | wc -l 99999 Reported-by:
-
Sheng Yong authored
commit d3bb910c upstream. Commit 88c5c13a (f2fs: fix multiple f2fs_add_link() calls having same name) does not cover the scenario where inline dentry is enabled. In that case, F2FS_I(dir)->task will be NULL, and __f2fs_add_link will lookup dentries one more time. This patch fixes it by moving the assigment of current task to a upper level to cover both normal and inline dentry. Fixes: 88c5c13a (f2fs: fix multiple f2fs_add_link() calls having same name) Signed-off-by:
Sheng Yong <shengyong1@huawei.com> Reviewed-by:
-
Jaegeuk Kim authored
commit 9bb02c36 upstream. This patch fixes the following scenario. - f2fs_create/f2fs_mkdir - write_checkpoint - f2fs_mark_inode_dirty_sync - block_operations - f2fs_lock_all - f2fs_sync_inode_meta - f2fs_unlock_all - sync_inode_metadata - f2fs_lock_op - f2fs_write_inode - update_inode_page - get_node_page return -ENOENT - new_inode_page - fill_node_footer - f2fs_mark_inode_dirty_sync - ... - f2fs_unlock_op - f2fs_inode_synced - f2fs_lock_all - do_checkpoint In this checkpoint, we can get an inode page which contains zeros having valid node footer only. Signed-off-by:
-
Jaegeuk Kim authored
commit c6f82fe9 upstream. This reverts commit 3436c4bd. This makes a leak to register dirty segments. I reproduced the issue by modified postmark which injects a lot of file create/delete/update and finally triggers huge number of SSR allocations. [Jaegeuk Kim: Change missing incorrect comment] Signed-off-by:
-
Jaegeuk Kim authored
commit c541a51b upstream. This patch fixes missing increased max cost caused by a patch that we increased cose of data segments in greedy algorithm. Fixes: b9cd2061 "f2fs: node segment is prior to data segment selected victim" Signed-off-by:
-
Ross Zwisler authored
commit 876f2946 upstream. This is based on a patch from Jan Kara that fixed the equivalent race in the DAX PTE fault path. Currently DAX PMD read fault can race with write(2) in the following way: CPU1 - write(2) CPU2 - read fault dax_iomap_pmd_fault() ->iomap_begin() - sees hole dax_iomap_rw() iomap_apply() ->iomap_begin - allocates blocks dax_iomap_actor() invalidate_inode_pages2_range() - there's nothing to invalidate grab_mapping_entry() - we add huge zero page to the radix tree and map it to page tables The result is that hole page is mapped into page tables (and thus zeros are seen in mmap) while file has data written in that place. Fix the problem by locking exception entry before mapping blocks for the fault. That way we are sure invalidate_inode_pages2_range() call for racing write will either block on entry lock waiting for the fault to finish (and unmap stale page tables after that) or read fault will see already allocated blocks by write(2). Fixes: 9f141d6e ("dax: Call ->iomap_begin without entry lock during dax fault") Link: http://lkml.kernel.org/r/20170510172700.18991-1-ross.zwisler@linux.intel.comSigned-off-by:
Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Jan Kara authored
commit fb26a1cb upstream. DAX will return to locking exceptional entry before mapping blocks for a page fault to fix possible races with concurrent writes. To avoid lock inversion between exceptional entry lock and transaction start, start the transaction already in ext4_dax_huge_fault(). Fixes: 9f141d6e Link: http://lkml.kernel.org/r/20170510085419.27601-4-jack@suse.czSigned-off-by:
-
Jan Kara authored
commit cd656375 upstream. Currently, we didn't invalidate page tables during invalidate_inode_pages2() for DAX. That could result in e.g. 2MiB zero page being mapped into page tables while there were already underlying blocks allocated and thus data seen through mmap were different from data seen by read(2). The following sequence reproduces the problem: - open an mmap over a 2MiB hole - read from a 2MiB hole, faulting in a 2MiB zero page - write to the hole with write(3p). The write succeeds but we incorrectly leave the 2MiB zero page mapping intact. - via the mmap, read the data that was just written. Since the zero page mapping is still intact we read back zeroes instead of the new data. Fix the problem by unconditionally calling invalidate_inode_pages2_range() in dax_iomap_actor() for new block allocations and by properly invalidating page tables in invalidate_inode_pages2_range() for DAX mappings. Fixes: c6dcf52c Link: http://lkml.kernel.org/r/20170510085419.27601-3-jack@suse.czSigned-off-by:
-
Ross Zwisler authored
commit 4636e70b upstream. Patch series "mm,dax: Fix data corruption due to mmap inconsistency", v4. This series fixes data corruption that can happen for DAX mounts when page faults race with write(2) and as a result page tables get out of sync with block mappings in the filesystem and thus data seen through mmap is different from data seen through read(2). The series passes testing with t_mmap_stale test program from Ross and also other mmap related tests on DAX filesystem. This patch (of 4): dax_invalidate_mapping_entry() currently removes DAX exceptional entries only if they are clean and unlocked. This is done via: invalidate_mapping_pages() invalidate_exceptional_entry() dax_invalidate_mapping_entry() However, for page cache pages removed in invalidate_mapping_pages() there is an additional criteria which is that the page must not be mapped. This is noted in the comments above invalidate_mapping_pages() and is checked in invalidate_inode_page(). For DAX entries this means that we can can end up in a situation where a DAX exceptional entry, either a huge zero page or a regular DAX entry, could end up mapped but without an associated radix tree entry. This is inconsistent with the rest of the DAX code and with what happens in the page cache case. We aren't able to unmap the DAX exceptional entry because according to its comments invalidate_mapping_pages() isn't allowed to block, and unmap_mapping_range() takes a write lock on the mapping->i_mmap_rwsem. Since we essentially never have unmapped DAX entries to evict from the radix tree, just remove dax_invalidate_mapping_entry(). Fixes: c6dcf52c ("mm: Invalidate DAX radix tree entries only if appropriate") Link: http://lkml.kernel.org/r/20170510085419.27601-2-jack@suse.czSigned-off-by:
-
Dan Williams authored
commit 565851c9 upstream. Usage of device_lock() for dax_region attributes is unnecessary and deadlock prone. It's unnecessary because the order of registration / un-registration guarantees that drvdata is always valid. It's deadlock prone because it sets up this situation: ndctl D 0 2170 2082 0x00000000 Call Trace: __schedule+0x31f/0x980 schedule+0x3d/0x90 schedule_preempt_disabled+0x15/0x20 __mutex_lock+0x402/0x980 ? __mutex_lock+0x158/0x980 ? align_show+0x2b/0x80 [dax] ? kernfs_seq_start+0x2f/0x90 mutex_lock_nested+0x1b/0x20 align_show+0x2b/0x80 [dax] dev_attr_show+0x20/0x50 ndctl D 0 2186 2079 0x00000000 Call Trace: __schedule+0x31f/0x980 schedule+0x3d/0x90 __kernfs_remove+0x1f6/0x340 ? kernfs_remove_by_name_ns+0x45/0xa0 ? remove_wait_queue+0x70/0x70 kernfs_remove_by_name_ns+0x45/0xa0 remove_files.isra.1+0x35/0x70 sysfs_remove_group+0x44/0x90 sysfs_remove_groups+0x2e/0x50 dax_region_unregister+0x25/0x40 [dax] devm_action_release+0xf/0x20 release_nodes+0x16d/0x2b0 devres_release_all+0x3c/0x60 device_release_driver_internal+0x17d/0x220 device_release_driver+0x12/0x20 unbind_store+0x112/0x160 ndctl/2170 is trying to acquire the device_lock() to read an attribute, and ndctl/2186 is holding the device_lock() while trying to drain all active attribute readers. Thanks to Yi Zhang for the reproduction script. Fixes: d7fe1a67 ("dax: add region 'id', 'size', and 'align' attributes") Reported-by:
-
Dan Williams authored
commit ed01e50a upstream. If device_add() fails, cleanup the cdev. Otherwise, we leak a kobj_map() with a stale device number. As Jason points out, there is a small possibility that userspace has opened and mapped the device in the time between cdev_add() and the device_add() failure. We need a new kill_dax_dev() helper to invalidate any established mappings. Fixes: ba09c01d ("dax: convert to the cdev api") Reported-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
Logan Gunthorpe <logang@deltatee.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
NeilBrown authored
commit 0c9d5b12 upstream. fix_sync_read_error() modifies a bio on a newly faulty device by setting bi_end_io to end_sync_write. This ensure that put_buf() will still call rdev_dec_pending() as required, but makes sure that subsequent code in fix_sync_read_error() doesn't try to read from the device. Unfortunately this interacts badly with sync_request_write() which assumes that any bio with bi_end_io set to non-NULL other than end_sync_read is safe to write to. As the device is now faulty it doesn't make sense to write. As the bio was recently used for a read, it is "dirty" and not suitable for immediate submission. In particular, ->bi_next might be non-NULL, which will cause generic_make_request() to complain. Break this interaction by refusing to write to devices which are marked as Faulty. Reported-and-tested-by:
Michael Wang <yun.wang@profitbricks.com> Fixes: 2e52d449 ("md/raid1: add failfast handling for reads.") Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Jason A. Donenfeld authored
commit 07a77929 upstream. The author meant to free the variable that was just allocated, instead of the one that failed to be allocated, but made a simple typo. This patch rectifies that. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Amir Goldstein authored
commit 4a99f3c8 upstream. The optimization for opaque dir create was wrongly being applied also to non-dir create. Fixes: 97c684cc ("ovl: create directories inside merged parent opaque") Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Björn Jacke authored
commit 85435d7a upstream. SFM is mapping doublequote to 0xF020 Without this patch creating files with doublequote fails to Windows/Mac Signed-off-by:
Bjoern Jacke <bjacke@samba.org> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
