Merge mysql.com:/home/jonas/src/mysql-4.1

into mysql.com:/home/jonas/src/mysql-4.1-ndb

BitKeeper/etc/logging_ok

@@ -40,6 +40,7 @@ georg@beethoven.local
 gerberb@ou800.zenez.com
 gluh@gluh.(none)
 gluh@gluh.mysql.r18.ru
+gordon@zero.local.lan
 greg@gcw.ath.cx
 greg@mysql.com
 guilhem@mysql.com
@@ -122,6 +123,7 @@ mwagner@work.mysql.com
 mydev@mysql.com
 mysql@home.(none)
 mysqldev@build.mysql2.com
+mysqldev@melody.local
 mysqldev@mysql.com
 ndbdev@ndbmaster.mysql.com
 nick@mysql.com

Build-tools/mysql-copyright

@@ -162,7 +162,23 @@ sub trim_the_fat
                 undef $/;
                 my $configure= <CONFIGURE>;
                 close(CONFIGURE);
-                $configure=~ s|${the_fat}/Makefile dnl\n?||g;
+
+                #
+                # If $the_fat Makefile line closes the parenthesis, then
+                # replace that line with just the closing parenthesis.
+                #
+                if ($configure=~ m|${the_fat}/Makefile\)\n?|)
+                {
+                        $configure=~ s|${the_fat}/Makefile(\)\n?)|$1|;
+                }
+                #
+                # Else just delete the line
+                #
+                else
+                {
+                        $configure=~ s|${the_fat}/Makefile dnl\n?||;
+                }
+
                 open(CONFIGURE,">configure.in") or die "Unable to open configure.in for write: $!\n";
                 print CONFIGURE $configure;
                 close(CONFIGURE);

VC++Files/client/mysqlclient.dsp

@@ -435,6 +435,10 @@ SOURCE=..\mysys\my_tempnam.c
 # End Source File
 # Begin Source File
 
+SOURCE=..\libmysql\my_time.c
+# End Source File
+# Begin Source File
+
 SOURCE=..\mysys\my_thr_init.c
 # End Source File
 # Begin Source File

configure.in

@@ -4,7 +4,7 @@ dnl Process this file with autoconf to produce a configure script.
 AC_INIT(sql/mysqld.cc)
 AC_CANONICAL_SYSTEM
 # The Docs Makefile.am parses this line!
-AM_INIT_AUTOMAKE(mysql, 4.1.3-beta)
+AM_INIT_AUTOMAKE(mysql, 4.1.4-beta)
 AM_CONFIG_HEADER(config.h)
 
 PROTOCOL_VERSION=10
@@ -521,7 +521,7 @@ fi
 AC_SUBST(CHECK_PID)
 AC_MSG_RESULT("$CHECK_PID")
 
-# We need a ANSI C compiler
+# We need an ANSI C compiler
 AM_PROG_CC_STDC
 
 # We need an assembler, too
@@ -529,7 +529,7 @@ AM_PROG_AS
 
 if test "$am_cv_prog_cc_stdc" = "no"
 then
-  AC_MSG_ERROR([MySQL requires a ANSI C compiler (and a C++ compiler). Try gcc. See the Installation chapter in the Reference Manual.])
+  AC_MSG_ERROR([MySQL requires an ANSI C compiler (and a C++ compiler). Try gcc. See the Installation chapter in the Reference Manual.])
 fi
 
 NOINST_LDFLAGS=
@@ -796,7 +796,7 @@ AC_CHECK_FUNC(sem_init, , AC_CHECK_LIB(posix4, sem_init))
 
 # For compress in zlib
 case $SYSTEM_TYPE in
-  *netware*)
+  *netware* | *modesto*)
     AC_DEFINE(HAVE_COMPRESS)
     ;;
   *)
@@ -2525,7 +2525,7 @@ done
 case $default_charset in 
     armscii8)
       default_charset_default_collation="armscii8_general_ci"
-      default_charset_collations="armscii8_general_ci armscii_bin"
+      default_charset_collations="armscii8_general_ci armscii8_bin"
       ;;
     ascii)
       default_charset_default_collation="ascii_general_ci"

include/errmsg.h

@@ -14,8 +14,8 @@
    along with this program; if not, write to the Free Software
    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA */
 
-/* Error messages for mysql clients */
-/* error messages for the demon is in share/language/errmsg.sys */
+/* Error messages for MySQL clients */
+/* (Error messages for the daemon are in share/language/errmsg.sys) */
 
 #ifdef	__cplusplus
 extern "C" {
@@ -83,10 +83,10 @@ extern const char *client_errors[];	/* Error messages */
 #define CR_SHARED_MEMORY_FILE_MAP_ERROR         2042
 #define CR_SHARED_MEMORY_MAP_ERROR              2043
 #define CR_SHARED_MEMORY_EVENT_ERROR     	2044
-#define CR_SHARED_MEMORY_CONNECT_ABANDODED_ERROR 2045
+#define CR_SHARED_MEMORY_CONNECT_ABANDONED_ERROR 2045
 #define CR_SHARED_MEMORY_CONNECT_SET_ERROR      2046
 #define CR_CONN_UNKNOW_PROTOCOL 		2047
 #define CR_INVALID_CONN_HANDLE			2048
 #define CR_SECURE_AUTH                          2049
-#define CR_FETCH_CANCELLED                      2050
+#define CR_FETCH_CANCELED                       2050
 #define CR_NO_DATA                              2051

include/my_dbug.h

@@ -16,10 +16,7 @@
 
 #ifndef _dbug_h
 #define _dbug_h
-#ifdef DBUG_OFF
-#define NDEBUG /* for assert.h */
-#endif
-#include <assert.h>
+
 #ifdef	__cplusplus
 extern "C" {
 #endif

include/my_global.h

@@ -313,6 +313,13 @@ C_MODE_END
 #include <crypt.h>
 #endif
 
+/*
+  A lot of our programs uses asserts, so better to always include it
+  This also fixes a problem when people uses DBUG_ASSERT without including
+  assert.h
+*/
+#include <assert.h>
+
 /* Go around some bugs in different OS and compilers */
 #if defined(_HPUX_SOURCE) && defined(HAVE_SYS_STREAM_H)
 #include <sys/stream.h>		/* HPUX 10.20 defines ulong here. UGLY !!! */
@@ -1020,22 +1027,22 @@ do { doubleget_union _tmp; \
 				    32))
 #define int2store(T,A)       do { uint def_temp= (uint) (A) ;\
                                   *((uchar*) (T))=  (uchar)(def_temp); \
-                                   *((uchar*) (T+1))=(uchar)((def_temp >> 8)); \
+                                   *((uchar*) (T)+1)=(uchar)((def_temp >> 8)); \
                              } while(0)
 #define int3store(T,A)       do { /*lint -save -e734 */\
                                   *((uchar*)(T))=(uchar) ((A));\
                                   *((uchar*) (T)+1)=(uchar) (((A) >> 8));\
                                   *((uchar*)(T)+2)=(uchar) (((A) >> 16)); \
                                   /*lint -restore */} while(0)
-#define int4store(T,A)       do { *(T)=(char) ((A));\
-                                  *((T)+1)=(char) (((A) >> 8));\
-                                  *((T)+2)=(char) (((A) >> 16));\
-                                  *((T)+3)=(char) (((A) >> 24)); } while(0)
-#define int5store(T,A)       do { *(T)=((A));\
-                                  *((T)+1)=(((A) >> 8));\
-                                  *((T)+2)=(((A) >> 16));\
-                                  *((T)+3)=(((A) >> 24)); \
-                                  *((T)+4)=(((A) >> 32)); } while(0)
+#define int4store(T,A)       do { *((char *)(T))=(char) ((A));\
+                                  *(((char *)(T))+1)=(char) (((A) >> 8));\
+                                  *(((char *)(T))+2)=(char) (((A) >> 16));\
+                                  *(((char *)(T))+3)=(char) (((A) >> 24)); } while(0)
+#define int5store(T,A)       do { *((char *)(T))=((A));\
+                                  *(((char *)(T))+1)=(((A) >> 8));\
+                                  *(((char *)(T))+2)=(((A) >> 16));\
+                                  *(((char *)(T))+3)=(((A) >> 24)); \
+                                  *(((char *)(T))+4)=(((A) >> 32)); } while(0)
 #define int8store(T,A)       do { uint def_temp= (uint) (A), def_temp2= (uint) ((A) >> 32); \
                                   int4store((T),def_temp); \
                                   int4store((T+4),def_temp2); } while(0)

libmysql/libmysql.c

@@ -2522,7 +2522,7 @@ static int stmt_read_row_unbuffered(MYSQL_STMT *stmt, unsigned char **row)
   if (mysql->status != MYSQL_STATUS_GET_RESULT)
   {
     set_stmt_error(stmt, stmt->unbuffered_fetch_cancelled ?
-                   CR_FETCH_CANCELLED : CR_COMMANDS_OUT_OF_SYNC,
+                   CR_FETCH_CANCELED : CR_COMMANDS_OUT_OF_SYNC,
                    unknown_sqlstate);
     goto error;
   }

mysql-test/include/ps_create.inc

+############### include/ps_create.inc ##################
+#                                                      #
+#  drop + create the tables used in most PS test cases #
+#         t/ps_*.test                                  #
+#                                                      #
+########################################################
+
+#    
+# NOTE: PLEASE SEE ps_1general.test (bottom) 
+#       BEFORE ADDING NEW TABLES HERE !!!
+#
+# Please be aware, that this file will be sourced by several
+# test case files stored within the subdirectory 't'.
+# So every change here will affect several test cases.
+
+#----------- Please insert your table definitions here ----------#
+
+
+#---- Please do not alter the following table definitions -------#
+
+--disable_warnings
+drop table if exists t1, t_many_col_types ;
+--enable_warnings
+
+eval create table t1
+(
+  a int, b varchar(30),
+  primary key(a)
+) engine = $type ;
+
+eval create table t_many_col_types 
+(
+  c1  tinyint, c2  smallint, c3  mediumint, c4  int,
+  c5  integer, c6  bigint, c7  float, c8  double,
+  c9  double precision, c10 real, c11 decimal(7, 4), c12 numeric(8, 4),
+  c13 date, c14 datetime, c15 timestamp(14), c16 time,
+  c17 year, c18 bit, c19 bool, c20 char,
+  c21 char(10), c22 varchar(30), c23 tinyblob, c24 tinytext,
+  c25 blob, c26 text, c27 mediumblob, c28 mediumtext,
+  c29 longblob, c30 longtext, c31 enum('one', 'two', 'three'),
+  c32 set('monday', 'tuesday', 'wednesday'),
+  primary key(c1)
+) engine = $type ;

mysql-test/include/ps_modify.inc

+###################### ps_modify.inc #########################
+#                                                            #
+#  Tests for prepared statements: INSERT/DELETE/UPDATE...    #
+#                                                            #
+##############################################################
+
+#    
+# NOTE: PLEASE SEE ps_1general.test (bottom) 
+#       BEFORE ADDING NEW TEST CASES HERE !!!
+
+#
+# Please be aware, that this file will be sourced by several test case files
+# stored within the subdirectory 't'. So every change here will affect 
+# several test cases.
+#
+# Please do not modify the structure (DROP/ALTER..) of the tables
+#     't1' and 't_many_col_types'. 
+#
+# But you are encouraged to use these two tables within your statements
+# whenever possible. 
+#     t1               - very simple table
+#     t_many_col_types - table with nearly all available column types
+#
+# The structure and the content of these tables can be found in
+#     include/ps_create.inc  CREATE TABLE ...
+#     include/ps_renew.inc   DELETE all rows and INSERT some rows
+#
+# Both tables are managed by the same storage engine.
+# The type of the storage engine is stored in the variable '$type' . 
+
+
+
+#------------------- Please insert your test cases here -------------------#
+
+
+
+#-------- Please be very carefull when editing behind this line  ----------#
+
+--disable_query_log
+select '------ delete tests ------' as test_sequence ;
+--enable_query_log
+--source include/ps_renew.inc
+
+## delete without parameter
+prepare stmt1 from 'delete from t1 where a=2' ;
+execute stmt1;
+select a,b from t1 where a=2;
+# delete with row not found
+execute stmt1;
+
+## delete with one parameter in the where clause
+insert into t1 values(0,NULL);
+set @arg00=NULL;
+prepare stmt1 from 'delete from t1 where b=?' ;
+execute stmt1 using @arg00;
+select a,b from t1 where b is NULL ;
+set @arg00='one';
+execute stmt1 using @arg00;
+select a,b from t1 where b=@arg00;
+
+## truncate a table
+--error 1295
+prepare stmt1 from 'truncate table t1' ;
+
+
+--disable_query_log
+select '------ update tests ------' as test_sequence ;
+--enable_query_log
+--source include/ps_renew.inc
+
+## update without parameter
+prepare stmt1 from 'update t1 set b=''a=two'' where a=2' ;
+execute stmt1;
+select a,b from t1 where a=2;
+# dummy update
+execute stmt1;
+select a,b from t1 where a=2;
+
+## update with one parameter in the set clause
+set @arg00=NULL;
+prepare stmt1 from 'update t1 set b=? where a=2' ;
+execute stmt1 using @arg00;
+select a,b from t1 where a=2;
+set @arg00='two';
+execute stmt1 using @arg00;
+select a,b from t1 where a=2;
+
+## update with one parameter in the where cause
+set @arg00=2;
+prepare stmt1 from 'update t1 set b=NULL where a=?' ;
+execute stmt1 using @arg00;
+select a,b from t1 where a=@arg00;
+update t1 set b='two' where a=@arg00;
+# row not found in update
+set @arg00=2000;
+execute stmt1 using @arg00;
+select a,b from t1 where a=@arg00;
+
+## update on primary key column (two parameters)
+set @arg00=2;
+set @arg01=22;
+prepare stmt1 from 'update t1 set a=? where a=?' ;
+# dummy update
+execute stmt1 using @arg00, @arg00;
+select a,b from t1 where a=@arg00;
+execute stmt1 using @arg01, @arg00;
+select a,b from t1 where a=@arg01;
+execute stmt1 using @arg00, @arg01;
+select a,b from t1 where a=@arg00;
+set @arg00=NULL;
+set @arg01=2;
+execute stmt1 using @arg00, @arg01;
+select a,b from t1;
+set @arg00=0;
+execute stmt1 using @arg01, @arg00;
+select a,b from t1;
+
+## update with subquery and several parameters
+set @arg00=23;
+set @arg01='two';
+set @arg02=2;
+set @arg03='two';
+set @arg04=2;
+--disable_warnings
+drop table if exists t2;
+--enable_warnings
+create table t2 as select a,b from t1 ;
+prepare stmt1 from 'update t1 set a=? where b=?
+                    and a in (select ? from t2
+                              where b = ? or a = ?)';
+execute stmt1 using @arg00, @arg01, @arg02, @arg03, @arg04 ;
+select a,b from t1 where a = @arg00 ;
+prepare stmt1 from 'update t1 set a=? where b=?
+                    and a not in (select ? from t2
+                              where b = ? or a = ?)';
+execute stmt1 using @arg04, @arg01, @arg02, @arg03, @arg00 ;
+select a,b from t1 ;
+drop table t2 ;
+
+## update with parameters in limit
+set @arg00=1;
+prepare stmt1 from 'update t1 set b=''bla''
+where a=2
+limit 1';
+execute stmt1 ;
+select a,b from t1 where b = 'bla' ;
+# currently (May 2004, Version 4.1) it is impossible
+-- error 1064
+prepare stmt1 from 'update t1 set b=''bla''
+where a=2
+limit ?';
+
+--disable_query_log
+select '------ insert tests ------' as test_sequence ;
+--enable_query_log
+--source include/ps_renew.inc
+
+## insert without parameter
+prepare stmt1 from 'insert into t1 values(5, ''five'' )';
+execute stmt1;
+select a,b from t1 where a = 5;
+
+## insert with one parameter in values part
+set @arg00='six' ;
+prepare stmt1 from 'insert into t1 values(6, ? )';
+execute stmt1 using @arg00;
+select a,b from t1 where b = @arg00;
+# the second insert fails, because the first column is primary key
+--error 1062
+execute stmt1 using @arg00;
+set @arg00=NULL ;
+prepare stmt1 from 'insert into t1 values(0, ? )';
+execute stmt1 using @arg00;
+select a,b from t1 where b is NULL;
+
+## insert with two parameter in values part
+set @arg00=8 ;
+set @arg01='eight' ;
+prepare stmt1 from 'insert into t1 values(?, ? )';
+execute stmt1 using @arg00, @arg01 ;
+select a,b from t1 where b = @arg01;
+
+## insert with two rows in values part
+set @arg00=81 ;
+set @arg01='8-1' ;
+set @arg02=82 ;
+set @arg03='8-2' ;
+prepare stmt1 from 'insert into t1 values(?,?),(?,?)';
+execute stmt1 using @arg00, @arg01, @arg02, @arg03 ;
+select a,b from t1 where a in (@arg00,@arg02) ;
+
+## insert with two parameter in the set part
+set @arg00=9 ;
+set @arg01='nine' ;
+prepare stmt1 from 'insert into t1 set a=?, b=? ';
+execute stmt1 using @arg00, @arg01 ;
+select a,b from t1 where a = @arg00 ;
+
+## insert with parameters in the ON DUPLICATE KEY part 
+set @arg00=6 ;
+set @arg01=1 ;
+prepare stmt1 from 'insert into t1 set a=?, b=''sechs''
+                    on duplicate key update a=a + ?, b=concat(b,''modified'') ';
+execute stmt1 using @arg00, @arg01;
+select * from t1;
+set @arg00=81 ;
+set @arg01=1 ;
+--error 1062
+execute stmt1 using @arg00, @arg01;
+
+## many parameters
+set @1000=1000 ;
+set @x1000_2="x1000_2" ;
+set @x1000_3="x1000_3" ;
+
+set @x1000="x1000" ;
+set @1100=1100 ;
+set @x1100="x1100" ;
+set @100=100 ;
+set @updated="updated" ;
+insert into t1 values(1000,'x1000_1') ;
+insert into t1 values(@1000,@x1000_2),(@1000,@x1000_3)
+               on duplicate key update a = a + @100, b = concat(b,@updated) ;
+select a,b from t1 where a >= 1000 ;
+delete from t1 where a >= 1000 ;
+insert into t1 values(1000,'x1000_1') ;
+prepare stmt1 from ' insert into t1 values(?,?),(?,?)
+               on duplicate key update a = a + ?, b = concat(b,?) ';
+execute stmt1 using @1000, @x1000_2, @1000, @x1000_3, @100, @updated ;
+select a,b from t1 where a >= 1000 ;
+delete from t1 where a >= 1000 ;
+insert into t1 values(1000,'x1000_1') ;
+execute stmt1 using @1000, @x1000_2, @1100, @x1000_3, @100, @updated ;
+select a,b from t1 where a >= 1000 ;
+delete from t1 where a >= 1000 ;
+
+## replace
+--error 1295
+prepare stmt1 from ' replace into t1 (a,b) select 100, ''hundred'' ';

mysql-test/include/ps_modify1.inc

+###################### ps_modify1.inc ########################
+#                                                            #
+#  Tests for prepared statements: big INSERT .. SELECTs      #
+#                                                            #
+##############################################################
+
+#
+# NOTE: THESE TESTS CANNOT BE APPLIED TO TABLES OF TYPE MERGE.
+#       Test which can be applied to MERGE tables should be stored in
+#            include/ps_modify.inc .
+#
+
+#    
+# NOTE: PLEASE SEE ps_1general.test (bottom) 
+#       BEFORE ADDING NEW TEST CASES HERE !!!
+
+#
+# Please be aware, that this file will be sourced by several test case files
+# stored within the subdirectory 't'. So every change here will affect 
+# several test cases.
+#
+# Please do not modify the structure (DROP/ALTER..) of the tables
+#     't1' and 't_many_col_types'. 
+#
+# But you are encouraged to use these two tables within your statements
+# (DELETE/UPDATE/...) whenever possible. 
+#     t1               - very simple table
+#     t_many_col_types - table with nearly all available column types
+#
+# The structure and the content of these tables can be found in
+#     include/ps_create.inc  CREATE TABLE ...
+#     include/ps_renew.inc   DELETE all rows and INSERT some rows
+#
+# Both tables are managed by the same storage engine.
+# The type of the storage engine is stored in the variable '$type' . 
+
+
+
+#------------------- Please insert your test cases here -------------------#
+
+
+#-------- Please be very carefull when editing behind this line  ----------#
+
+## big insert select statements
+set @duplicate='duplicate ' ;
+set @1000=1000 ;
+set @5=5 ;
+select a,b from t1 where a < 5 ;
+--enable_info
+insert into t1 select a + @1000, concat(@duplicate,b) from t1
+where a < @5 ;
+--disable_info
+select a,b from t1 where a >= 1000 ;
+delete from t1 where a >= 1000 ;
+prepare stmt1 from ' insert into t1 select a + ?, concat(?,b) from t1
+where a < ? ' ;
+--enable_info
+execute stmt1 using @1000, @duplicate, @5;
+--disable_info
+select a,b from t1 where a >= 1000 ;
+delete from t1 where a >= 1000 ;
+
+set @float=1.00;
+set @five='five' ;
+--disable_warnings
+drop table if exists t2;
+--enable_warnings
+create table t2 like t1 ;
+--enable_info
+insert into t2 (b,a) 
+select @duplicate, sum(first.a) from t1 first, t1 second
+  where first.a <> @5 and second.b = first.b
+     and second.b <> @five
+  group by second.b
+  having sum(second.a) > @2
+union
+select b, a + @100 from t1
+  where (a,b) in ( select sqrt(a+@1)+CAST(@float AS signed),b 
+                 from t1);
+--disable_info
+select a,b from t2;
+delete from t2 ;
+prepare stmt1 from ' insert into t2 (b,a) 
+select ?, sum(first.a)
+  from t1 first, t1 second 
+  where first.a <> ? and second.b = first.b and second.b <> ?
+  group by second.b
+  having sum(second.a) > ?
+union
+select b, a + ? from t1
+  where (a,b) in ( select sqrt(a+?)+CAST(? AS signed),b 
+                 from t1 ) ' ;
+--enable_info
+execute stmt1 using @duplicate, @5, @five, @2, @100, @1, @float ;
+--disable_info
+select a,b from t2;
+drop table t2;

mysql-test/include/ps_renew.inc

+################ include/ps_renew.inc #################
+#                                                     #
+#    renew the content of t1 and t_many_col_types     #
+#                                                     #
+#######################################################
+
+# truncate could not be used, because it is not supported
+# in tables of type MERGE
+delete from t1 ;
+insert into t1 values (1,'one');
+insert into t1 values (2,'two');
+insert into t1 values (3,'three');
+insert into t1 values (4,'four');
+commit ;
+
+delete from t_many_col_types ;
+insert into t_many_col_types
+set c1= 1, c2= 1, c3= 1, c4= 1, c5= 1, c6= 1, c7= 1, c8= 1, c9= 1,
+    c10= 1, c11= 1, c12 = 1,
+    c13= '2004-02-29', c14= '2004-02-29 11:11:11', c15= '2004-02-29 11:11:11',
+    c16= '11:11:11', c17= '2004',
+    c18= 1, c19=true, c20= 'a', c21= '123456789a', 
+    c22= '123456789a123456789b123456789c', c23= 'tinyblob', c24= 'tinytext',
+    c25= 'blob', c26= 'text', c27= 'mediumblob', c28= 'mediumtext',
+    c29= 'longblob', c30= 'longtext', c31='one', c32= 'monday';
+insert into t_many_col_types
+set c1= 9, c2= 9, c3= 9, c4= 9, c5= 9, c6= 9, c7= 9, c8= 9, c9= 9,
+    c10= 9, c11= 9, c12 = 9,
+    c13= '2004-02-29', c14= '2004-02-29 11:11:11', c15= '2004-02-29 11:11:11',
+    c16= '11:11:11', c17= '2004',
+    c18= 1, c19=false, c20= 'a', c21= '123456789a', 
+    c22= '123456789a123456789b123456789c', c23= 'tinyblob', c24= 'tinytext',
+    c25= 'blob', c26= 'text', c27= 'mediumblob', c28= 'mediumtext',
+    c29= 'longblob', c30= 'longtext', c31='two', c32= 'tuesday';

mysql-test/ndb/ndbcluster.sh

@@ -95,7 +95,7 @@ if [ ! -x $exec_ndb ]; then
   echo "$exec_ndb missing"
   exit 1
 fi
-if [ ! -x $exec_mgmtsrv ]; then
+if [ ! -x $exec_mgmtsrvr ]; then
   echo "$exec_mgmtsrvr missing"
   exit 1
 fi

mysql-test/r/bdb.result

@@ -1244,3 +1244,10 @@ a	b
 3	three
 4	four
 drop table t1, t2;
+create table t1 (a int, b varchar(30), primary key(a)) engine = bdb;
+insert into t1 values (1,'one');
+commit;
+truncate t1;
+select * from t1;
+a	b
+drop table t1;

mysql-test/r/lowercase_table3.result

@@ -6,5 +6,5 @@ drop table t1;
 flush tables;
 CREATE TABLE t1 (a int) ENGINE=INNODB;
 SELECT * from T1;
-ERROR HY000: Can't open file: 'T1.InnoDB'. (errno: 1)
+ERROR HY000: Can't open file: 'T1.InnoDB' (errno: 1)
 drop table t1;

mysql-test/r/ndb_index_ordered.result

@@ -175,10 +175,10 @@ insert into t1 values (19,4, 0);
 select * from t1 where b<=5 and c=0;
 a	b	c
 19	4	0
-select * from t1 where b=4 and c<=5;
+select * from t1 where b=4 and c<=5 order by a;
 a	b	c
-19	4	0
 17	4	4
+19	4	0
 select * from t1 where b<=4 and c<=5 order by a;
 a	b	c
 7	2	1

mysql-test/r/rpl_delete_all.result

@@ -9,7 +9,7 @@ drop database if exists test1;
 Warnings:
 Note	1008	Can't drop database 'test1'; database doesn't exist
 show tables from test1;
-ERROR HY000: Can't read dir of './test1/' (Errcode: 2)
+ERROR HY000: Can't read dir of './test1/' (Errcode: X)
 create table t1 (a int);
 drop table if exists t1;
 Warnings:

mysql-test/r/show_check.result

@@ -400,3 +400,10 @@ where user='mysqltest_1' || user='mysqltest_2' || user='mysqltest_3';
 delete from mysql.db   
 where user='mysqltest_1' || user='mysqltest_2' || user='mysqltest_3';
 flush privileges;
+set names latin1;
+create database ``;
+create table ``.`` (a int) engine=heap;
+show table status from `` LIKE '';
+Name	Engine	Version	Row_format	Rows	Avg_row_length	Data_length	Max_data_length	Index_length	Data_free	Auto_increment	Create_time	Update_time	Check_time	Collation	Checksum	Create_options	Comment
+	HEAP	9	Fixed	0	5	#	#	#	0	NULL	NULL	NULL	NULL	latin1_swedish_ci	NULL		
+drop database ``;

mysql-test/t/bdb.test

@@ -886,3 +886,14 @@ insert into t2 (a, b)
   select a, b from t1 where (a, b) in (select a, b from t1);
 select * from t2;
 drop table t1, t2;
+
+#
+# Bug #4304: TRUNCATE <table of type BDB> , wrong result
+#
+
+create table t1 (a int, b varchar(30), primary key(a)) engine = bdb;
+insert into t1 values (1,'one');
+commit;
+truncate t1;
+select * from t1;
+drop table t1;

mysql-test/t/ndb_index_ordered.test

@@ -106,7 +106,7 @@ select * from t1 where b<=5 order by a;
 select * from t1 where b<=5 and c=0;
 insert into t1 values (19,4, 0);
 select * from t1 where b<=5 and c=0;
-select * from t1 where b=4 and c<=5;
+select * from t1 where b=4 and c<=5 order by a;
 select * from t1 where b<=4 and c<=5 order by a;
 select * from t1 where b<=5 and c=0 or b<=5 and c=2;
 drop table t1;

mysql-test/t/ps_2myisam.test

+###############################################
+#                                             #
+#  Prepared Statements test on MYISAM tables  #
+#                                             #
+###############################################
+
+#    
+# NOTE: PLEASE SEE ps_1general.test (bottom) 
+#       BEFORE ADDING NEW TEST CASES HERE !!!
+
+use test;
+
+let $type= 'MYISAM' ;
+-- source include/ps_create.inc
+-- source include/ps_renew.inc
+
+-- source include/ps_query.inc
+-- source include/ps_modify.inc
+-- source include/ps_modify1.inc
+
+drop table t1, t_many_col_types;

mysql-test/t/ps_3innodb.test

+###############################################
+#                                             #
+#  Prepared Statements test on InnoDB tables  #
+#                                             #
+###############################################
+
+#    
+# NOTE: PLEASE SEE ps_1general.test (bottom) 
+#       BEFORE ADDING NEW TEST CASES HERE !!!
+
+use test;
+
+let $type= 'InnoDB' ;
+-- source include/ps_create.inc
+-- source include/ps_renew.inc
+
+-- source include/ps_query.inc
+-- source include/ps_modify.inc
+-- source include/ps_modify1.inc
+
+drop table t1, t_many_col_types;

mysql-test/t/ps_4heap.test

+###############################################
+#                                             #
+#   Prepared Statements test on HEAP tables   #
+#                                             #
+###############################################
+
+#    
+# NOTE: PLEASE SEE ps_1general.test (bottom) 
+#       BEFORE ADDING NEW TEST CASES HERE !!!
+
+use test;
+
+let $type= 'HEAP' ;
+--disable_warnings
+drop table if exists t1, t_many_col_types ;
+--enable_warnings
+eval create table t1
+(
+  a int, b varchar(30),
+  primary key(a)
+) engine = $type ;
+
+--disable_warnings
+drop table if exists t_many_col_types;
+--enable_warnings
+# The used table type doesn't support BLOB/TEXT columns.
+# (The server would send error 1163  .)
+# So we use char(100) instead.
+eval create table t_many_col_types 
+(
+  c1  tinyint, c2  smallint, c3  mediumint, c4  int,
+  c5  integer, c6  bigint, c7  float, c8  double,
+  c9  double precision, c10 real, c11 decimal(7, 4), c12 numeric(8, 4),
+  c13 date, c14 datetime, c15 timestamp(14), c16 time,
+  c17 year, c18 bit, c19 bool, c20 char,
+  c21 char(10), c22 varchar(30), c23 char(100), c24 char(100),
+  c25 char(100), c26 char(100), c27 char(100), c28 char(100),
+  c29 char(100), c30 char(100), c31 enum('one', 'two', 'three'),
+  c32 set('monday', 'tuesday', 'wednesday'),
+  primary key(c1)
+) engine = $type ;
+-- source include/ps_renew.inc
+
+-- source include/ps_query.inc
+-- source include/ps_modify.inc
+-- source include/ps_modify1.inc
+
+drop table t1, t_many_col_types;

mysql-test/t/ps_5merge.test

+###############################################
+#                                             #
+#  Prepared Statements test on MERGE tables   #
+#                                             #
+###############################################
+
+#    
+# NOTE: PLEASE SEE ps_1general.test (bottom) 
+#       BEFORE ADDING NEW TEST CASES HERE !!!
+
+use test;
+
+--disable_warnings
+drop table if exists t1, t1_1, t1_2,
+     t_many_col_types, t_many_col_types_1, t_many_col_types_2;
+--enable_warnings
+let $type= 'MYISAM' ;
+-- source include/ps_create.inc
+rename table t1 to t1_1, t_many_col_types to t_many_col_types_1 ;
+-- source include/ps_create.inc
+rename table t1 to t1_2, t_many_col_types to t_many_col_types_2 ;
+
+create table t1
+(
+  a int, b varchar(30),
+  primary key(a)
+) ENGINE = MERGE UNION=(t1_1,t1_2)
+INSERT_METHOD=FIRST;
+create table t_many_col_types
+(
+  c1  tinyint, c2  smallint, c3  mediumint, c4  int,
+  c5  integer, c6  bigint, c7  float, c8  double,
+  c9  double precision, c10 real, c11 decimal(7, 4), c12 numeric(8, 4),
+  c13 date, c14 datetime, c15 timestamp(14), c16 time,
+  c17 year, c18 bit, c19 bool, c20 char,
+  c21 char(10), c22 varchar(30), c23 tinyblob, c24 tinytext,
+  c25 blob, c26 text, c27 mediumblob, c28 mediumtext,
+  c29 longblob, c30 longtext, c31 enum('one', 'two', 'three'),
+  c32 set('monday', 'tuesday', 'wednesday'),
+  primary key(c1)
+)  ENGINE = MERGE UNION=(t_many_col_types_1,t_many_col_types_2)
+INSERT_METHOD=FIRST;
+-- source include/ps_renew.inc
+
+-- source include/ps_query.inc
+-- source include/ps_modify.inc
+# no test of ps_modify1, because insert .. select 
+# is not allowed on MERGE tables
+# -- source include/ps_modify1.inc
+
+# Lets's try the same tests with INSERT_METHOD=LAST
+drop table t1, t_many_col_types ;
+create table t1
+(
+  a int, b varchar(30),
+  primary key(a)
+) ENGINE = MERGE UNION=(t1_1,t1_2)
+INSERT_METHOD=LAST;
+create table t_many_col_types
+(
+  c1  tinyint, c2  smallint, c3  mediumint, c4  int,
+  c5  integer, c6  bigint, c7  float, c8  double,
+  c9  double precision, c10 real, c11 decimal(7, 4), c12 numeric(8, 4),
+  c13 date, c14 datetime, c15 timestamp(14), c16 time,
+  c17 year, c18 bit, c19 bool, c20 char,
+  c21 char(10), c22 varchar(30), c23 tinyblob, c24 tinytext,
+  c25 blob, c26 text, c27 mediumblob, c28 mediumtext,
+  c29 longblob, c30 longtext, c31 enum('one', 'two', 'three'),
+  c32 set('monday', 'tuesday', 'wednesday'),
+  primary key(c1)
+)  ENGINE = MERGE UNION=(t_many_col_types_1,t_many_col_types_2)
+INSERT_METHOD=LAST;
+-- source include/ps_renew.inc
+
+-- source include/ps_query.inc
+-- source include/ps_modify.inc
+# no test of ps_modify1, because insert .. select
+# is not allowed on MERGE tables
+# -- source include/ps_modify1.inc
+
+drop table t1, t1_1, t1_2, 
+           t_many_col_types_1, t_many_col_types_2, t_many_col_types;

mysql-test/t/ps_6bdb.test

+###############################################
+#                                             #
+#   Prepared Statements test on BDB tables    #
+#                                             #
+###############################################
+
+#    
+# NOTE: PLEASE SEE ps_1general.test (bottom) 
+#       BEFORE ADDING NEW TEST CASES HERE !!!
+
+use test;
+
+-- source include/have_bdb.inc
+let $type= 'BDB' ;
+-- source include/ps_create.inc
+-- source include/ps_renew.inc
+
+-- source include/ps_query.inc
+-- source include/ps_modify.inc
+-- source include/ps_modify1.inc
+
+drop table t1, t_many_col_types;

mysql-test/t/rpl_delete_all.test

@@ -6,7 +6,8 @@ connection master;
 drop database if exists test1;
 sync_slave_with_master;
 # can't read dir
-error 12;
+--replace_result "Errcode: 1" "Errcode: X" "Errcode: 2" "Errcode: X"
+--error 12
 show tables from test1;
 
 connection slave;
@@ -15,7 +16,7 @@ connection master;
 drop table if exists t1;
 sync_slave_with_master;
 # table does not exist
-error 1146;
+--error 1146
 select * from t1;
 
 connection master;

mysql-test/t/show_check.test

@@ -304,3 +304,11 @@ where user='mysqltest_1' || user='mysqltest_2' || user='mysqltest_3';
 delete from mysql.db   
 where user='mysqltest_1' || user='mysqltest_2' || user='mysqltest_3';
 flush privileges;
+
+#Bug #4374 SHOW TABLE STATUS FROM ignores collation_connection
+set names latin1;
+create database ``;
+create table ``.`` (a int) engine=heap;
+--replace_column 7 # 8 # 9 #
+show table status from `` LIKE '';
+drop database ``;

ndb/src/kernel/blocks/ndbfs/Ndbfs.cpp

@@ -63,7 +63,7 @@ Ndbfs::Ndbfs(const Configuration & conf) :
   const ndb_mgm_configuration_iterator * p = conf.getOwnConfigIterator();
   ndbrequire(p != 0);
 
-  m_maxOpenedFiles = 40;
+  m_maxFiles = 40;
   //ndb_mgm_get_int_parameter(p, CFG_DB_MAX_OPEN_FILES, &m_maxFiles);
 
   // Create idle AsyncFiles