Fix Bug #64432 Port bug fix #54330 from mysql-5.1 to mysql-5.5

storage/innobase/row/row0merge.c

@@ -1599,22 +1599,29 @@ row_merge(
 	const dict_index_t*	index,	/*!< in: index being created */
 	merge_file_t*		file,	/*!< in/out: file containing
 					index entries */
-	ulint*			half,	/*!< in/out: half the file */
 	row_merge_block_t*	block,	/*!< in/out: 3 buffers */
 	int*			tmpfd,	/*!< in/out: temporary file handle */
-	struct TABLE*		table)	/*!< in/out: MySQL table, for
+	struct TABLE*		table,	/*!< in/out: MySQL table, for
 					reporting erroneous key value
 					if applicable */
+	ulint*			num_run,/*!< in/out: Number of runs remain
+					to be merged */
+	ulint*			run_offset) /*!< in/out: Array contains the
+					first offset number for each merge
+					run */
 {
 	ulint		foffs0;	/*!< first input offset */
 	ulint		foffs1;	/*!< second input offset */
 	ulint		error;	/*!< error code */
 	merge_file_t	of;	/*!< output file */
-	const ulint	ihalf	= *half;
+	const ulint	ihalf	= run_offset[*num_run / 2];
 				/*!< half the input file */
-	ulint		ohalf;	/*!< half the output file */
+	ulint		n_run	= 0;
+				/*!< num of runs generated from this merge */
+
 
 	UNIV_MEM_ASSERT_W(block[0], 3 * sizeof block[0]);
+
 	ut_ad(ihalf < file->offset);
 
 	of.fd = *tmpfd;
@@ -1630,17 +1637,20 @@ row_merge(
 #endif /* POSIX_FADV_SEQUENTIAL */
 
 	/* Merge blocks to the output file. */
-	ohalf = 0;
 	foffs0 = 0;
 	foffs1 = ihalf;
 
+	UNIV_MEM_INVALID(run_offset, *num_run * sizeof *run_offset);
+
 	for (; foffs0 < ihalf && foffs1 < file->offset; foffs0++, foffs1++) {
-		ulint	ahalf;	/*!< arithmetic half the input file */
 
 		if (UNIV_UNLIKELY(trx_is_interrupted(trx))) {
 			return(DB_INTERRUPTED);
 		}
 
+		/* Remember the offset number for this run */
+		run_offset[n_run++] = of.offset;
+
 		error = row_merge_blocks(index, file, block,
 					 &foffs0, &foffs1, &of, table);
 
@@ -1648,21 +1658,6 @@ row_merge(
 			return(error);
 		}
 
-		/* Record the offset of the output file when
-		approximately half the output has been generated.  In
-		this way, the next invocation of row_merge() will
-		spend most of the time in this loop.  The initial
-		estimate is ohalf==0. */
-		ahalf = file->offset / 2;
-		ut_ad(ohalf <= of.offset);
-
-		/* Improve the estimate until reaching half the input
-		file size, or we can not get any closer to it.  All
-		comparands should be non-negative when !(ohalf < ahalf)
-		because ohalf <= of.offset. */
-		if (ohalf < ahalf || of.offset - ahalf < ohalf - ahalf) {
-			ohalf = of.offset;
-		}
 	}
 
 	/* Copy the last blocks, if there are any. */
@@ -1672,6 +1667,9 @@ row_merge(
 			return(DB_INTERRUPTED);
 		}
 
+		/* Remember the offset number for this run */
+		run_offset[n_run++] = of.offset;
+
 		if (!row_merge_blocks_copy(index, file, block, &foffs0, &of)) {
 			return(DB_CORRUPTION);
 		}
@@ -1684,6 +1682,9 @@ row_merge(
 			return(DB_INTERRUPTED);
 		}
 
+		/* Remember the offset number for this run */
+		run_offset[n_run++] = of.offset;
+
 		if (!row_merge_blocks_copy(index, file, block, &foffs1, &of)) {
 			return(DB_CORRUPTION);
 		}
@@ -1695,10 +1696,23 @@ row_merge(
 		return(DB_CORRUPTION);
 	}
 
+	ut_ad(n_run <= *num_run);
+
+	*num_run = n_run;
+
+	/* Each run can contain one or more offsets. As merge goes on,
+	the number of runs (to merge) will reduce until we have one
+	single run. So the number of runs will always be smaller than
+	the number of offsets in file */
+	ut_ad((*num_run) <= file->offset);
+
+	/* The number of offsets in output file is always equal or
+	smaller than input file */
+	ut_ad(of.offset <= file->offset);
+
 	/* Swap file descriptors for the next pass. */
 	*tmpfd = file->fd;
 	*file = of;
-	*half = ohalf;
 
 	UNIV_MEM_INVALID(block[0], 3 * sizeof block[0]);
 
@@ -1723,27 +1737,44 @@ row_merge_sort(
 					if applicable */
 {
 	ulint	half = file->offset / 2;
+	ulint	num_runs;
+	ulint*	run_offset;
+	ulint	error = DB_SUCCESS;
+
+	/* Record the number of merge runs we need to perform */
+	num_runs = file->offset;
+
+	/* If num_runs are less than 1, nothing to merge */
+	if (num_runs <= 1) {
+		return(error);
+	}
+
+	/* "run_offset" records each run's first offset number */
+	run_offset = (ulint*) mem_alloc(file->offset * sizeof(ulint));
+
+	/* This tells row_merge() where to start for the first round
+	of merge. */
+	run_offset[half] = half;
 
 	/* The file should always contain at least one byte (the end
 	of file marker).  Thus, it must be at least one block. */
 	ut_ad(file->offset > 0);
 
+	/* Merge the runs until we have one big run */
 	do {
-		ulint	error;
+		error = row_merge(trx, index, file, block, tmpfd,
+				  table, &num_runs, run_offset);
 
-		error = row_merge(trx, index, file, &half,
-				  block, tmpfd, table);
+		UNIV_MEM_ASSERT_RW(run_offset, num_runs * sizeof *run_offset);
 
 		if (error != DB_SUCCESS) {
-			return(error);
+			break;
 		}
+	} while (num_runs > 1);
 
-		/* half > 0 should hold except when the file consists
-		of one block.  No need to merge further then. */
-		ut_ad(half > 0 || file->offset == 1);
-	} while (half < file->offset && half > 0);
+	mem_free(run_offset);
 
-	return(DB_SUCCESS);
+	return(error);
 }
 
 /*************************************************************//**