xtradb 5.5.13

CMakeLists.txt

-# Copyright (C) 2009 Oracle/Innobase Oy
-#
+# Copyright (c) 2006, 2011, Oracle and/or its affiliates. All rights reserved.
+# 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
 # the Free Software Foundation; version 2 of the License.
@@ -11,43 +11,210 @@
 # 
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+
+# This is the CMakeLists for InnoDB
+
+INCLUDE(CheckFunctionExists)
+INCLUDE(CheckCSourceCompiles)
+INCLUDE(CheckCSourceRuns)
+
+# OS tests
+IF(UNIX)
+  IF(CMAKE_SYSTEM_NAME STREQUAL "Linux")
+    CHECK_INCLUDE_FILES (libaio.h HAVE_LIBAIO_H)
+    CHECK_LIBRARY_EXISTS(aio io_queue_init "" HAVE_LIBAIO)
+    ADD_DEFINITIONS("-DUNIV_LINUX -D_GNU_SOURCE=1")
+    IF(HAVE_LIBAIO_H AND HAVE_LIBAIO)
+      ADD_DEFINITIONS(-DLINUX_NATIVE_AIO=1)
+      LINK_LIBRARIES(aio)
+    ENDIF()
+  ELSEIF(CMAKE_SYSTEM_NAME MATCHES "HP*")
+    ADD_DEFINITIONS("-DUNIV_HPUX -DUNIV_MUST_NOT_INLINE")
+  ELSEIF(CMAKE_SYSTEM_NAME STREQUAL "AIX")
+    ADD_DEFINITIONS("-DUNIV_AIX -DUNIX_MUST_NOT_INLINE")
+  ELSEIF(CMAKE_SYSTEM_NAME STREQUAL "SunOS")
+    ADD_DEFINITIONS("-DUNIV_SOLARIS")
+  ELSE()
+   ADD_DEFINITIONS("-DUNIV_MUST_NOT_INLINE")
+  ENDIF()
+ENDIF()
+
+# Enable InnoDB's UNIV_DEBUG for debug builds
+SET(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG} -DUNIV_DEBUG")
+SET(CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG} -DUNIV_DEBUG")
+
+IF(NOT MSVC)
+# either define HAVE_IB_GCC_ATOMIC_BUILTINS or not
+IF(NOT CMAKE_CROSSCOMPILING)
+  CHECK_C_SOURCE_RUNS(
+  "
+  int main()
+  {
+    long	x;
+    long	y;
+    long	res;
+    char	c;
+
+    x = 10;
+    y = 123;
+    res = __sync_bool_compare_and_swap(&x, x, y);
+    if (!res || x != y) {
+      return(1);
+    }
+
+    x = 10;
+    y = 123;
+    res = __sync_bool_compare_and_swap(&x, x + 1, y);
+    if (res || x != 10) {
+      return(1);
+    }
+    x = 10;
+    y = 123;
+    res = __sync_add_and_fetch(&x, y);
+    if (res != 123 + 10 || x != 123 + 10) {
+      return(1);
+    }
+
+    c = 10;
+    res = __sync_lock_test_and_set(&c, 123);
+    if (res != 10 || c != 123) {
+      return(1);
+    }
+    return(0);
+  }"
+  HAVE_IB_GCC_ATOMIC_BUILTINS
+  )
+ENDIF()
+
+IF(HAVE_IB_GCC_ATOMIC_BUILTINS)
+ ADD_DEFINITIONS(-DHAVE_IB_GCC_ATOMIC_BUILTINS=1)
+ENDIF()
+
+ # either define HAVE_IB_ATOMIC_PTHREAD_T_GCC or not
+IF(NOT CMAKE_CROSSCOMPILING)
+  CHECK_C_SOURCE_RUNS(
+  "
+  #include <pthread.h>
+  #include <string.h>
+
+  int main() {
+    pthread_t       x1;
+    pthread_t       x2;
+    pthread_t       x3;
 
-# This is the CMakeLists for InnoDB Plugin
+    memset(&x1, 0x0, sizeof(x1));
+    memset(&x2, 0x0, sizeof(x2));
+    memset(&x3, 0x0, sizeof(x3));
 
+    __sync_bool_compare_and_swap(&x1, x2, x3);
 
-SET(CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG} -DSAFEMALLOC -DSAFE_MUTEX")
-SET(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG} -DSAFEMALLOC -DSAFE_MUTEX")
+    return(0);
+  }"
+  HAVE_IB_ATOMIC_PTHREAD_T_GCC)
+ENDIF()
+IF(HAVE_IB_ATOMIC_PTHREAD_T_GCC)
+  ADD_DEFINITIONS(-DHAVE_IB_ATOMIC_PTHREAD_T_GCC=1)
+ENDIF()
 
-# Starting at 5.1.38, MySQL CMake files are simplified. But the plugin
-# CMakeLists.txt still needs to work with previous versions of MySQL.
-IF (MYSQL_VERSION_ID GREATER "50137")
-	INCLUDE("${PROJECT_SOURCE_DIR}/storage/mysql_storage_engine.cmake")
-ENDIF (MYSQL_VERSION_ID GREATER "50137")
+ENDIF(NOT MSVC)
 
-IF (CMAKE_SIZEOF_VOID_P MATCHES 8)
-	SET(WIN64 TRUE)
-ENDIF (CMAKE_SIZEOF_VOID_P MATCHES 8)
+# Solaris atomics
+IF(CMAKE_SYSTEM_NAME STREQUAL "SunOS")
+  CHECK_FUNCTION_EXISTS(atomic_cas_ulong  HAVE_ATOMIC_CAS_ULONG)
+  CHECK_FUNCTION_EXISTS(atomic_cas_32 HAVE_ATOMIC_CAS_32)
+  CHECK_FUNCTION_EXISTS(atomic_cas_64 HAVE_ATOMIC_CAS_64)
+  CHECK_FUNCTION_EXISTS(atomic_add_long_nv HAVE_ATOMIC_ADD_LONG_NV)
+  CHECK_FUNCTION_EXISTS(atomic_swap_uchar HAVE_ATOMIC_SWAP_UCHAR)
+  IF(HAVE_ATOMIC_CAS_ULONG AND
+     HAVE_ATOMIC_CAS_32 AND
+     HAVE_ATOMIC_CAS_64 AND
+     HAVE_ATOMIC_ADD_LONG_NV AND
+     HAVE_ATOMIC_SWAP_UCHAR)
+    SET(HAVE_IB_SOLARIS_ATOMICS 1)
+  ENDIF()
+  
+  IF(HAVE_IB_SOLARIS_ATOMICS)
+    ADD_DEFINITIONS(-DHAVE_IB_SOLARIS_ATOMICS=1)
+  ENDIF()
 
-# Include directories under innodb_plugin
-INCLUDE_DIRECTORIES(${CMAKE_SOURCE_DIR}/storage/innodb_plugin/include
-		    ${CMAKE_SOURCE_DIR}/storage/innodb_plugin/handler)
+  IF(NOT CMAKE_CROSSCOMPILING)
+  # either define HAVE_IB_ATOMIC_PTHREAD_T_SOLARIS or not
+  CHECK_C_SOURCE_COMPILES(
+  "   #include <pthread.h>
+      #include <string.h>
 
-# Include directories under mysql
-INCLUDE_DIRECTORIES(${CMAKE_SOURCE_DIR}/include
-		    ${CMAKE_SOURCE_DIR}/sql
-		    ${CMAKE_SOURCE_DIR}/regex
-		    ${CMAKE_SOURCE_DIR}/zlib
-		    ${CMAKE_SOURCE_DIR}/extra/yassl/include)
+      int main(int argc, char** argv) {
+        pthread_t       x1;
+        pthread_t       x2;
+        pthread_t       x3;
+
+        memset(&x1, 0x0, sizeof(x1));
+        memset(&x2, 0x0, sizeof(x2));
+        memset(&x3, 0x0, sizeof(x3));
+
+        if (sizeof(pthread_t) == 4) {
+        
+          atomic_cas_32(&x1, x2, x3);
+        
+        } else if (sizeof(pthread_t) == 8) {
+        
+          atomic_cas_64(&x1, x2, x3);
+        
+        } else {
+        
+          return(1);
+        }
+
+      return(0);
+    }
+  " HAVE_IB_ATOMIC_PTHREAD_T_SOLARIS)
+  ENDIF()
+  IF(HAVE_IB_ATOMIC_PTHREAD_T_SOLARIS)
+    ADD_DEFINITIONS(-DHAVE_IB_ATOMIC_PTHREAD_T_SOLARIS=1)
+  ENDIF()
+ENDIF()
+
+
+IF(UNIX)
+# this is needed to know which one of atomic_cas_32() or atomic_cas_64()
+# to use in the source
+SET(CMAKE_EXTRA_INCLUDE_FILES pthread.h)
+CHECK_TYPE_SIZE(pthread_t SIZEOF_PTHREAD_T)
+SET(CMAKE_EXTRA_INCLUDE_FILES)
+ENDIF()
+
+IF(SIZEOF_PTHREAD_T)
+  ADD_DEFINITIONS(-DSIZEOF_PTHREAD_T=${SIZEOF_PTHREAD_T})
+ENDIF()
+
+IF(MSVC)
+  ADD_DEFINITIONS(-DHAVE_WINDOWS_ATOMICS)
+ENDIF()
+
+
+# Include directories under innobase
+INCLUDE_DIRECTORIES(${CMAKE_SOURCE_DIR}/storage/innobase/include
+		    ${CMAKE_SOURCE_DIR}/storage/innobase/handler)
+
+# Sun Studio bug with -xO2
+IF(CMAKE_C_COMPILER_ID MATCHES "SunPro" 
+	AND CMAKE_C_FLAGS_RELEASE MATCHES "O2" 
+	AND NOT CMAKE_BUILD_TYPE STREQUAL "Debug")
+	# Sun Studio 12 crashes with -xO2 flag, but not with higher optimization
+	# -xO3
+	SET_SOURCE_FILES_PROPERTIES(${CMAKE_CURRENT_SOURCE_DIR}/rem/rem0rec.c 
+    PROPERTIES COMPILE_FLAGS -xO3)
+ENDIF()
 
 # Removing compiler optimizations for innodb/mem/* files on 64-bit Windows
 # due to 64-bit compiler error, See MySQL Bug #19424, #36366, #34297
-IF (MSVC AND $(WIN64))
+IF (MSVC AND CMAKE_SIZEOF_VOID_P EQUAL 8)
 	SET_SOURCE_FILES_PROPERTIES(mem/mem0mem.c mem/mem0pool.c
 				    PROPERTIES COMPILE_FLAGS -Od)
-ENDIF (MSVC AND $(WIN64))
+ENDIF()
 
-SET(INNODB_PLUGIN_SOURCES	btr/btr0btr.c btr/btr0cur.c btr/btr0pcur.c btr/btr0sea.c
+SET(INNOBASE_SOURCES	btr/btr0btr.c btr/btr0cur.c btr/btr0pcur.c btr/btr0sea.c
 			buf/buf0buddy.c buf/buf0buf.c buf/buf0flu.c buf/buf0lru.c buf/buf0rea.c
 			data/data0data.c data/data0type.c
 			dict/dict0boot.c dict/dict0crea.c dict/dict0dict.c dict/dict0load.c dict/dict0mem.c
@@ -67,22 +234,25 @@ SET(INNODB_PLUGIN_SOURCES	btr/btr0btr.c btr/btr0cur.c btr/btr0pcur.c btr/btr0sea
 			os/os0file.c os/os0proc.c os/os0sync.c os/os0thread.c
 			page/page0cur.c page/page0page.c page/page0zip.c
 			que/que0que.c
-			handler/ha_innodb.cc handler/handler0alter.cc handler/i_s.cc handler/mysql_addons.cc
+			handler/ha_innodb.cc handler/handler0alter.cc handler/i_s.cc
 			read/read0read.c
 			rem/rem0cmp.c rem/rem0rec.c
 			row/row0ext.c row/row0ins.c row/row0merge.c row/row0mysql.c row/row0purge.c row/row0row.c
 			row/row0sel.c row/row0uins.c row/row0umod.c row/row0undo.c row/row0upd.c row/row0vers.c
-			srv/srv0que.c srv/srv0srv.c srv/srv0start.c
+			srv/srv0srv.c srv/srv0start.c
 			sync/sync0arr.c sync/sync0rw.c sync/sync0sync.c
-			thr/thr0loc.c
 			trx/trx0i_s.c trx/trx0purge.c trx/trx0rec.c trx/trx0roll.c trx/trx0rseg.c
 			trx/trx0sys.c trx/trx0trx.c trx/trx0undo.c
 			usr/usr0sess.c
-			ut/ut0byte.c ut/ut0dbg.c ut/ut0mem.c ut/ut0rbt.c ut/ut0rnd.c ut/ut0ut.c ut/ut0vec.c
-			ut/ut0list.c ut/ut0wqueue.c)
-# Windows atomics do not perform well. Disable Windows atomics by default.
-# See bug#52102 for details.
-#ADD_DEFINITIONS(-DHAVE_WINDOWS_ATOMICS -DINNODB_RW_LOCKS_USE_ATOMICS -DHAVE_IB_PAUSE_INSTRUCTION)
-ADD_DEFINITIONS(-DHAVE_IB_PAUSE_INSTRUCTION)
-
-MYSQL_STORAGE_ENGINE(INNODB_PLUGIN)
+			ut/ut0byte.c ut/ut0dbg.c ut/ut0list.c ut/ut0mem.c ut/ut0rbt.c ut/ut0rnd.c
+			ut/ut0ut.c ut/ut0vec.c ut/ut0wqueue.c ut/ut0bh.c)
+
+IF(WITH_INNODB)
+  # Legacy option
+  SET(WITH_INNOBASE_STORAGE_ENGINE TRUE)
+ENDIF()
+
+MYSQL_ADD_PLUGIN(innobase ${INNOBASE_SOURCES} STORAGE_ENGINE 
+  DEFAULT
+  MODULE_OUTPUT_NAME ha_innodb
+  LINK_LIBRARIES ${ZLIB_LIBRARY})

COPYING.Sun_Microsystems

-Portions of this software contain modifications contributed by
-Sun Microsystems, Inc. These contributions are used with the following
-license:
-
-Copyright (c) 2009, Sun Microsystems, Inc.
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-      * Redistributions of source code must retain the above copyright
-        notice, this list of conditions and the following disclaimer.
-      * Redistributions in binary form must reproduce the above
-        copyright notice, this list of conditions and the following
-        disclaimer in the documentation and/or other materials
-        provided with the distribution.
-      * Neither the name of Sun Microsystems, Inc. nor the names of its
-        contributors may be used to endorse or promote products derived
-        from this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Doxyfile

@@ -565,7 +565,7 @@ RECURSIVE              = YES
 # excluded from the INPUT source files. This way you can easily exclude a
 # subdirectory from a directory tree whose root is specified with the INPUT tag.
 
-EXCLUDE                = ut0auxconf_*
+EXCLUDE                =
 
 # The EXCLUDE_SYMLINKS tag can be used select whether or not files or
 # directories that are symbolic links (a Unix filesystem feature) are excluded

Makefile.am

-# Copyright (C) 2001, 2004, 2006 MySQL AB & Innobase Oy
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-# 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-
-# Process this file with automake to create Makefile.in
-
-MYSQLDATAdir=		$(localstatedir)
-MYSQLSHAREdir=		$(pkgdatadir)
-MYSQLBASEdir=		$(prefix)
-MYSQLLIBdir=		$(pkglibdir)
-pkgplugindir=		$(pkglibdir)/plugin
-INCLUDES=		-I$(top_srcdir)/include -I$(top_builddir)/include \
-			-I$(top_srcdir)/regex \
-			-I$(srcdir)/include \
-			-I$(top_srcdir)/sql \
-			-I$(srcdir) @ZLIB_INCLUDES@
-
-DEFS=			@DEFS@
-
-
-noinst_HEADERS=		\
-			handler/ha_innodb.h	\
-			handler/i_s.h		\
-			include/btr0btr.h	\
-			include/btr0btr.ic	\
-			include/btr0cur.h	\
-			include/btr0cur.ic	\
-			include/btr0pcur.h	\
-			include/btr0pcur.ic	\
-			include/btr0sea.h	\
-			include/btr0sea.ic	\
-			include/btr0types.h	\
-			include/buf0buddy.h	\
-			include/buf0buddy.ic	\
-			include/buf0buf.h	\
-			include/buf0buf.ic	\
-			include/buf0flu.h	\
-			include/buf0flu.ic	\
-			include/buf0lru.h	\
-			include/buf0lru.ic	\
-			include/buf0rea.h	\
-			include/buf0types.h	\
-			include/data0data.h	\
-			include/data0data.ic	\
-			include/data0type.h	\
-			include/data0type.ic	\
-			include/data0types.h	\
-			include/db0err.h	\
-			include/dict0boot.h	\
-			include/dict0boot.ic	\
-			include/dict0crea.h	\
-			include/dict0crea.ic	\
-			include/dict0dict.h	\
-			include/dict0dict.ic	\
-			include/dict0load.h	\
-			include/dict0load.ic	\
-			include/dict0mem.h	\
-			include/dict0mem.ic	\
-			include/dict0types.h	\
-			include/dyn0dyn.h	\
-			include/dyn0dyn.ic	\
-			include/eval0eval.h	\
-			include/eval0eval.ic	\
-			include/eval0proc.h	\
-			include/eval0proc.ic	\
-			include/fil0fil.h	\
-			include/fsp0fsp.h	\
-			include/fsp0fsp.ic	\
-			include/fsp0types.h	\
-			include/fut0fut.h	\
-			include/fut0fut.ic	\
-			include/fut0lst.h	\
-			include/fut0lst.ic	\
-			include/ha0ha.h		\
-			include/ha0ha.ic	\
-			include/ha0storage.h	\
-			include/ha0storage.ic	\
-			include/ha_prototypes.h	\
-			include/handler0alter.h	\
-			include/hash0hash.h	\
-			include/hash0hash.ic	\
-			include/ibuf0ibuf.h	\
-			include/ibuf0ibuf.ic	\
-			include/ibuf0types.h	\
-			include/lock0iter.h	\
-			include/lock0lock.h	\
-			include/lock0lock.ic	\
-			include/lock0priv.h	\
-			include/lock0priv.ic	\
-			include/lock0types.h	\
-			include/log0log.h	\
-			include/log0log.ic	\
-			include/log0recv.h	\
-			include/log0recv.ic	\
-			include/mach0data.h	\
-			include/mach0data.ic	\
-			include/mem0dbg.h	\
-			include/mem0dbg.ic	\
-			include/mem0mem.h	\
-			include/mem0mem.ic	\
-			include/mem0pool.h	\
-			include/mem0pool.ic	\
-			include/mtr0log.h	\
-			include/mtr0log.ic	\
-			include/mtr0mtr.h	\
-			include/mtr0mtr.ic	\
-			include/mtr0types.h	\
-			include/mysql_addons.h	\
-			include/os0file.h	\
-			include/os0proc.h	\
-			include/os0proc.ic	\
-			include/os0sync.h	\
-			include/os0sync.ic	\
-			include/os0thread.h	\
-			include/os0thread.ic	\
-			include/page0cur.h	\
-			include/page0cur.ic	\
-			include/page0page.h	\
-			include/page0page.ic	\
-			include/page0types.h	\
-			include/page0zip.h	\
-			include/page0zip.ic	\
-			include/pars0grm.h	\
-			include/pars0opt.h	\
-			include/pars0opt.ic	\
-			include/pars0pars.h	\
-			include/pars0pars.ic	\
-			include/pars0sym.h	\
-			include/pars0sym.ic	\
-			include/pars0types.h	\
-			include/que0que.h	\
-			include/que0que.ic	\
-			include/que0types.h	\
-			include/read0read.h	\
-			include/read0read.ic	\
-			include/read0types.h	\
-			include/rem0cmp.h	\
-			include/rem0cmp.ic	\
-			include/rem0rec.h	\
-			include/rem0rec.ic	\
-			include/rem0types.h	\
-			include/row0ext.h	\
-			include/row0ext.ic	\
-			include/row0ins.h	\
-			include/row0ins.ic	\
-			include/row0merge.h	\
-			include/row0mysql.h	\
-			include/row0mysql.ic	\
-			include/row0purge.h	\
-			include/row0purge.ic	\
-			include/row0row.h	\
-			include/row0row.ic	\
-			include/row0sel.h	\
-			include/row0sel.ic	\
-			include/row0types.h	\
-			include/row0uins.h	\
-			include/row0uins.ic	\
-			include/row0umod.h	\
-			include/row0umod.ic	\
-			include/row0undo.h	\
-			include/row0undo.ic	\
-			include/row0upd.h	\
-			include/row0upd.ic	\
-			include/row0vers.h	\
-			include/row0vers.ic	\
-			include/srv0que.h	\
-			include/srv0srv.h	\
-			include/srv0srv.ic	\
-			include/srv0start.h	\
-			include/sync0arr.h	\
-			include/sync0arr.ic	\
-			include/sync0rw.h	\
-			include/sync0rw.ic	\
-			include/sync0sync.h	\
-			include/sync0sync.ic	\
-			include/sync0types.h	\
-			include/thr0loc.h	\
-			include/thr0loc.ic	\
-			include/trx0i_s.h	\
-			include/trx0purge.h	\
-			include/trx0purge.ic	\
-			include/trx0rec.h	\
-			include/trx0rec.ic	\
-			include/trx0roll.h	\
-			include/trx0roll.ic	\
-			include/trx0rseg.h	\
-			include/trx0rseg.ic	\
-			include/trx0sys.h	\
-			include/trx0sys.ic	\
-			include/trx0trx.h	\
-			include/trx0trx.ic	\
-			include/trx0types.h	\
-			include/trx0undo.h	\
-			include/trx0undo.ic	\
-			include/trx0xa.h	\
-			include/univ.i		\
-			include/usr0sess.h	\
-			include/usr0sess.ic	\
-			include/usr0types.h	\
-			include/ut0auxconf.h	\
-			include/ut0byte.h	\
-			include/ut0byte.ic	\
-			include/ut0dbg.h	\
-			include/ut0list.h	\
-			include/ut0list.ic	\
-			include/ut0lst.h	\
-			include/ut0mem.h	\
-			include/ut0mem.ic	\
-			include/ut0rbt.h	\
-			include/ut0rnd.h	\
-			include/ut0rnd.ic	\
-			include/ut0sort.h	\
-			include/ut0ut.h		\
-			include/ut0ut.ic	\
-			include/ut0vec.h	\
-			include/ut0vec.ic	\
-			include/ut0wqueue.h	\
-			handler/innodb_patch_info.h	\
-			mem/mem0dbg.c
-
-EXTRA_LIBRARIES=	libinnobase.a
-noinst_LIBRARIES=	@plugin_innodb_plugin_static_target@
-libinnobase_a_SOURCES=	\
-			btr/btr0btr.c			\
-			btr/btr0cur.c			\
-			btr/btr0pcur.c			\
-			btr/btr0sea.c			\
-			buf/buf0buddy.c			\
-			buf/buf0buf.c			\
-			buf/buf0flu.c			\
-			buf/buf0lru.c			\
-			buf/buf0rea.c			\
-			data/data0data.c		\
-			data/data0type.c		\
-			dict/dict0boot.c		\
-			dict/dict0crea.c		\
-			dict/dict0dict.c		\
-			dict/dict0load.c		\
-			dict/dict0mem.c			\
-			dyn/dyn0dyn.c			\
-			eval/eval0eval.c		\
-			eval/eval0proc.c		\
-			fil/fil0fil.c			\
-			fsp/fsp0fsp.c			\
-			fut/fut0fut.c			\
-			fut/fut0lst.c			\
-			ha/ha0ha.c			\
-			ha/ha0storage.c			\
-			ha/hash0hash.c			\
-			handler/ha_innodb.cc		\
-			handler/handler0alter.cc	\
-			handler/i_s.cc			\
-			handler/mysql_addons.cc		\
-			ibuf/ibuf0ibuf.c		\
-			lock/lock0iter.c		\
-			lock/lock0lock.c		\
-			log/log0log.c			\
-			log/log0recv.c			\
-			mach/mach0data.c		\
-			mem/mem0mem.c			\
-			mem/mem0pool.c			\
-			mtr/mtr0log.c			\
-			mtr/mtr0mtr.c			\
-			os/os0file.c			\
-			os/os0proc.c			\
-			os/os0sync.c			\
-			os/os0thread.c			\
-			page/page0cur.c			\
-			page/page0page.c		\
-			page/page0zip.c			\
-			pars/lexyy.c			\
-			pars/pars0grm.c			\
-			pars/pars0opt.c			\
-			pars/pars0pars.c		\
-			pars/pars0sym.c			\
-			que/que0que.c			\
-			read/read0read.c		\
-			rem/rem0cmp.c			\
-			rem/rem0rec.c			\
-			row/row0ext.c			\
-			row/row0ins.c			\
-			row/row0merge.c			\
-			row/row0mysql.c			\
-			row/row0purge.c			\
-			row/row0row.c			\
-			row/row0sel.c			\
-			row/row0uins.c			\
-			row/row0umod.c			\
-			row/row0undo.c			\
-			row/row0upd.c			\
-			row/row0vers.c			\
-			srv/srv0que.c			\
-			srv/srv0srv.c			\
-			srv/srv0start.c			\
-			sync/sync0arr.c			\
-			sync/sync0rw.c			\
-			sync/sync0sync.c		\
-			thr/thr0loc.c			\
-			trx/trx0i_s.c			\
-			trx/trx0purge.c			\
-			trx/trx0rec.c			\
-			trx/trx0roll.c			\
-			trx/trx0rseg.c			\
-			trx/trx0sys.c			\
-			trx/trx0trx.c			\
-			trx/trx0undo.c			\
-			usr/usr0sess.c			\
-			ut/ut0byte.c			\
-			ut/ut0dbg.c			\
-			ut/ut0list.c			\
-			ut/ut0mem.c			\
-			ut/ut0rbt.c			\
-			ut/ut0rnd.c			\
-			ut/ut0ut.c			\
-			ut/ut0vec.c			\
-			ut/ut0wqueue.c
-
-libinnobase_a_CXXFLAGS=	$(AM_CXXFLAGS)
-libinnobase_a_CFLAGS=	$(AM_CFLAGS)
-
-EXTRA_LTLIBRARIES=	ha_innodb_plugin.la
-pkgplugin_LTLIBRARIES=	@plugin_innodb_plugin_shared_target@
-
-ha_innodb_plugin_la_LDFLAGS=	-module -rpath $(pkgplugindir)
-ha_innodb_plugin_la_CXXFLAGS=	$(AM_CXXFLAGS) $(INNODB_DYNAMIC_CFLAGS)
-ha_innodb_plugin_la_CFLAGS=	$(AM_CFLAGS) $(INNODB_DYNAMIC_CFLAGS)
-ha_innodb_plugin_la_SOURCES=	$(libinnobase_a_SOURCES)
-
-EXTRA_DIST=		CMakeLists.txt plug.in \
-			pars/make_bison.sh pars/make_flex.sh \
-			pars/pars0grm.y pars/pars0lex.l
-
-# Don't update the files from bitkeeper
-%::SCCS/s.%

README

-This is the source of the InnoDB Plugin 1.0.6 for MySQL 5.1
-===========================================================
-
-Instructions for compiling the plugin:
---------------------------------------
-
-1. Get the latest MySQL 5.1 sources from
-   http://dev.mysql.com/downloads/mysql/5.1.html#source
-
-2. Replace the contents of the mysql-5.1.N/storage/innobase/ directory
-   with the contents of this directory.
-
-3. Optional (only necessary if you are going to run tests from the
-   mysql-test suite): cd into the innobase directory and run ./setup.sh
-
-4. Compile MySQL as usual.
-   If compiling MySQL 5.1.38 or newer, disable the InnoDB Plugin that comes
-   with MySQL in storage/innodb_plugin with the configure option
-   --without-plugin-innodb_plugin
-
-5. Enjoy!
-
-See the online documentation for more detailed instructions:
-http://www.innodb.com/doc/innodb_plugin-1.0/innodb-plugin-installation.html
-
-For more information about InnoDB visit
-http://www.innodb.com
-
-Please report any problems or issues with the plugin in the InnoDB Forums
-http://forums.innodb.com/ or in the MySQL Bugs database http://bugs.mysql.com
-
-Thank you for using the InnoDB plugin!

buf/buf0rea.c

@@ -37,6 +37,8 @@ Created 11/5/1995 Heikki Tuuri
 #include "os0file.h"
 #include "srv0start.h"
 #include "srv0srv.h"
+#include "mysql/plugin.h"
+#include "mysql/service_thd_wait.h"
 
 /** The linear read-ahead area size */
 #define	BUF_READ_AHEAD_LINEAR_AREA	BUF_READ_AHEAD_AREA
@@ -178,6 +180,7 @@ not_to_recover:
 
 	ut_ad(buf_page_in_file(bpage));
 
+	thd_wait_begin(NULL, THD_WAIT_DISKIO);
 	if (zip_size) {
 		*err = _fil_io(OS_FILE_READ | wake_later,
 			      sync, space, zip_size, offset, 0, zip_size,
@@ -189,6 +192,7 @@ not_to_recover:
 			      sync, space, 0, offset, 0, UNIV_PAGE_SIZE,
 			      ((buf_block_t*) bpage)->frame, bpage, trx);
 	}
+	thd_wait_end(NULL);
 
 	if (srv_pass_corrupt_table) {
 		if (*err != DB_SUCCESS) {
@@ -201,7 +205,7 @@ not_to_recover:
 	if (sync) {
 		/* The i/o is already completed when we arrive from
 		fil_read */
-		buf_page_io_complete(bpage, trx);
+		buf_page_io_complete(bpage);
 	}
 
 	return(1);
@@ -222,6 +226,7 @@ buf_read_page(
 	ulint	offset,	/*!< in: page number */
 	trx_t*	trx)
 {
+	buf_pool_t*	buf_pool = buf_pool_get(space, offset);
 	ib_int64_t	tablespace_version;
 	ulint		count;
 	ulint		err;
@@ -246,7 +251,7 @@ buf_read_page(
 	}
 
 	/* Flush pages from the end of the LRU list if necessary */
-	buf_flush_free_margin(FALSE);
+	buf_flush_free_margin(buf_pool, TRUE);
 
 	/* Increment number of I/O operations used for LRU policy. */
 	buf_LRU_stat_inc_io();
@@ -282,12 +287,13 @@ UNIV_INTERN
 ulint
 buf_read_ahead_linear(
 /*==================*/
-	ulint	space,	/*!< in: space id */
-	ulint	zip_size,/*!< in: compressed page size in bytes, or 0 */
-	ulint	offset,	/*!< in: page number of a page; NOTE: the current thread
-			must want access to this page (see NOTE 3 above) */
+	ulint	space,		/*!< in: space id */
+	ulint	zip_size,	/*!< in: compressed page size in bytes, or 0 */
+	ulint	offset,		/*!< in: page number; see NOTE 3 above */
+	ibool	inside_ibuf,	/*!< in: TRUE if we are inside ibuf routine */
 	trx_t*	trx)
 {
+	buf_pool_t*	buf_pool = buf_pool_get(space, offset);
 	ib_int64_t	tablespace_version;
 	buf_page_t*	bpage;
 	buf_frame_t*	frame;
@@ -303,12 +309,12 @@ buf_read_ahead_linear(
 	ulint		err;
 	ulint		i;
 	const ulint	buf_read_ahead_linear_area
-		= BUF_READ_AHEAD_LINEAR_AREA;
+		= BUF_READ_AHEAD_LINEAR_AREA(buf_pool);
 	ulint		threshold;
 
- 	if (!(srv_read_ahead & 2)) {
- 		return(0);
- 	}
+	if (!(srv_read_ahead & 2)) {
+		return(0);
+	}
 
 	if (UNIV_UNLIKELY(srv_startup_is_before_trx_rollback_phase)) {
 		/* No read-ahead to avoid thread deadlocks */
@@ -342,12 +348,10 @@ buf_read_ahead_linear(
 
 	tablespace_version = fil_space_get_version(space);
 
-	//buf_pool_mutex_enter();
-	mutex_enter(&buf_pool_mutex);
+	buf_pool_mutex_enter(buf_pool);
 
 	if (high > fil_space_get_size(space)) {
-		//buf_pool_mutex_exit();
-		mutex_exit(&buf_pool_mutex);
+		buf_pool_mutex_exit(buf_pool);
 		/* The area is not whole, return */
 
 		return(0);
@@ -355,12 +359,11 @@ buf_read_ahead_linear(
 
 	if (buf_pool->n_pend_reads
 	    > buf_pool->curr_size / BUF_READ_AHEAD_PEND_LIMIT) {
-		//buf_pool_mutex_exit();
-		mutex_exit(&buf_pool_mutex);
+		buf_pool_mutex_exit(buf_pool);
 
 		return(0);
 	}
-	mutex_exit(&buf_pool_mutex);
+	buf_pool_mutex_exit(buf_pool);
 
 	/* Check that almost all pages in the area have been accessed; if
 	offset == low, the accesses must be in a descending order, otherwise,
@@ -375,15 +378,15 @@ buf_read_ahead_linear(
 	/* How many out of order accessed pages can we ignore
 	when working out the access pattern for linear readahead */
 	threshold = ut_min((64 - srv_read_ahead_threshold),
-			   BUF_READ_AHEAD_AREA);
+			   BUF_READ_AHEAD_AREA(buf_pool));
 
 	fail_count = 0;
 
-	rw_lock_s_lock(&page_hash_latch);
+	rw_lock_s_lock(&buf_pool->page_hash_latch);
 	for (i = low; i < high; i++) {
-		bpage = buf_page_hash_get(space, i);
+		bpage = buf_page_hash_get(buf_pool, space, i);
 
-		if ((bpage == NULL) || !buf_page_is_accessed(bpage)) {
+		if (bpage == NULL || !buf_page_is_accessed(bpage)) {
 			/* Not accessed */
 			fail_count++;
 
@@ -407,8 +410,8 @@ buf_read_ahead_linear(
 
 		if (fail_count > threshold) {
 			/* Too many failures: return */
-			//buf_pool_mutex_exit();
-			rw_lock_s_unlock(&page_hash_latch);
+			//buf_pool_mutex_exit(buf_pool);
+			rw_lock_s_unlock(&buf_pool->page_hash_latch);
 			return(0);
 		}
 
@@ -420,11 +423,11 @@ buf_read_ahead_linear(
 	/* If we got this far, we know that enough pages in the area have
 	been accessed in the right order: linear read-ahead can be sensible */
 
-	bpage = buf_page_hash_get(space, offset);
+	bpage = buf_page_hash_get(buf_pool, space, offset);
 
 	if (bpage == NULL) {
-		//buf_pool_mutex_exit();
-		rw_lock_s_unlock(&page_hash_latch);
+		//buf_pool_mutex_exit(buf_pool);
+		rw_lock_s_unlock(&buf_pool->page_hash_latch);
 
 		return(0);
 	}
@@ -450,8 +453,8 @@ buf_read_ahead_linear(
 	pred_offset = fil_page_get_prev(frame);
 	succ_offset = fil_page_get_next(frame);
 
-	//buf_pool_mutex_exit();
-	rw_lock_s_unlock(&page_hash_latch);
+	//buf_pool_mutex_exit(buf_pool);
+	rw_lock_s_unlock(&buf_pool->page_hash_latch);
 
 	if ((offset == low) && (succ_offset == offset + 1)) {
 
@@ -487,11 +490,9 @@ buf_read_ahead_linear(
 
 	/* If we got this far, read-ahead can be sensible: do it */
 
-	if (ibuf_inside()) {
-		ibuf_mode = BUF_READ_IBUF_PAGES_ONLY;
-	} else {
-		ibuf_mode = BUF_READ_ANY_PAGE;
-	}
+	ibuf_mode = inside_ibuf
+		? BUF_READ_IBUF_PAGES_ONLY | OS_AIO_SIMULATED_WAKE_LATER
+		: BUF_READ_ANY_PAGE | OS_AIO_SIMULATED_WAKE_LATER;
 
 	count = 0;
 
@@ -508,7 +509,7 @@ buf_read_ahead_linear(
 		if (!ibuf_bitmap_page(zip_size, i)) {
 			count += buf_read_page_low(
 				&err, FALSE,
-				ibuf_mode | OS_AIO_SIMULATED_WAKE_LATER,
+				ibuf_mode,
 				space, zip_size, FALSE, tablespace_version, i, trx);
 			if (err == DB_TABLESPACE_DELETED) {
 				ut_print_timestamp(stderr);
@@ -530,7 +531,7 @@ buf_read_ahead_linear(
 	os_aio_simulated_wake_handler_threads();
 
 	/* Flush pages from the end of the LRU list if necessary */
-	buf_flush_free_margin(FALSE);
+	buf_flush_free_margin(buf_pool, TRUE);
 
 #ifdef UNIV_DEBUG
 	if (buf_debug_prints && (count > 0)) {
@@ -578,18 +579,21 @@ buf_read_ibuf_merge_pages(
 {
 	ulint	i;
 
-	ut_ad(!ibuf_inside());
 #ifdef UNIV_IBUF_DEBUG
 	ut_a(n_stored < UNIV_PAGE_SIZE);
 #endif
-	while (buf_pool->n_pend_reads
-	       > buf_pool->curr_size / BUF_READ_AHEAD_PEND_LIMIT) {
-		os_thread_sleep(500000);
-	}
 
 	for (i = 0; i < n_stored; i++) {
-		ulint	zip_size = fil_space_get_zip_size(space_ids[i]);
-		ulint	err;
+		ulint		err;
+		buf_pool_t*	buf_pool;
+		ulint		zip_size = fil_space_get_zip_size(space_ids[i]);
+
+		buf_pool = buf_pool_get(space_ids[i], page_nos[i]);
+
+		while (buf_pool->n_pend_reads
+		       > buf_pool->curr_size / BUF_READ_AHEAD_PEND_LIMIT) {
+			os_thread_sleep(500000);
+		}
 
 		if (UNIV_UNLIKELY(zip_size == ULINT_UNDEFINED)) {
 
@@ -614,8 +618,8 @@ tablespace_deleted:
 
 	os_aio_simulated_wake_handler_threads();
 
-	/* Flush pages from the end of the LRU list if necessary */
-	buf_flush_free_margin(FALSE);
+	/* Flush pages from the end of all the LRU lists if necessary */
+	buf_flush_free_margins(FALSE);
 
 #ifdef UNIV_DEBUG
 	if (buf_debug_prints) {
@@ -708,11 +712,12 @@ not_to_recover:
 	tablespace_version = fil_space_get_version(space);
 
 	for (i = 0; i < n_stored; i++) {
+		buf_pool_t*	buf_pool;
 
 		count = 0;
 
 		os_aio_print_debug = FALSE;
-
+		buf_pool = buf_pool_get(space, page_nos[i]);
 		while (buf_pool->n_pend_reads >= recv_n_pool_free_frames / 2) {
 
 			os_aio_simulated_wake_handler_threads();
@@ -751,8 +756,8 @@ not_to_recover:
 
 	os_aio_simulated_wake_handler_threads();
 
-	/* Flush pages from the end of the LRU list if necessary */
-	buf_flush_free_margin(FALSE);
+	/* Flush pages from the end of all the LRU lists if necessary */
+	buf_flush_free_margins(FALSE);
 
 #ifdef UNIV_DEBUG
 	if (buf_debug_prints) {

build/debian/README.Maintainer

-
-###########################
-##	FIXME for 5.1    ##
-###########################
-
-* put this trigger-recreation thing into the init scripts -- what?!
-* Let debian-i10n-english review all template changes before the translaters start.
-* Mark debconf translations as obsolete with debconf-updatepo.
-
-###########################################################################
-# Here are some information that are only of interest for the current and #
-# following Debian maintainers of MySQL.                                  #
-###########################################################################
-
-The debian/ directory is under SVN control, see debian/control for URL.
-
-#
-# Preparing a new version
-#
-The new orig.tar.gz (without non-free documentation) is created in /tmp/ when
-running this command:
- 
-debian/rules get-orig-source
-
-#
-# mysqlreport
-#
-The authors e-mail address is <public@codenode.com>.
-
-#
-# Remarks to dependencies
-#
-libwrap0-dev (>= 7.6-8.3)
-	According to bug report 114582 where where build problems on
-	IA-64/sid with at least two prior versions.
-psmisc
-	/usr/bin/killall in the initscript
-
-zlib1g in libmysqlclient-dev:	
-	"mysql_config --libs" ads "-lz"
-
-Build-Dep:
-
-debhelper (>=4.1.16):
-	See po-debconf(7).
-
-autoconf (>= 2.13-20), automake1.7
-	Try to get rid of them.
-
-doxygen, tetex-bin, tetex-extra, gs
-	for ndb/docs/*tex
-
-#
-# Remarks to the start scripts
-#
-
-## initscripts rely on mysqladmin from a different package
-We have the problem that "/etc/init.d/mysql stop" relies on mysqladmin which
-is in another package (mysql-client) and a passwordless access that's maybe
-only available if the user configured his /root/.my.cnf. Can this be a problem?
-* normal mode: not because the user is required to have it. Else:
-* purge/remove: not, same as normal mode
-* upgrade: not, same as normal mode
-* first install: not, it depends on mysql-client which at least is unpacked
-                 so mysqladmin is there (to ping). It is not yet configured
-		passwordles but if there's a server running then there's a
-                /root/.my.cnf. Anyways, we simply kill anything that's mysqld.
-
-## Passwordless access for the maintainer scripts
-Another issue is that the scripts needs passwordless access. To ensure this
-a debian-sys-maint user is configured which has process and shutdown privs.
-The file with the randomly (that's important!) generated password must be
-present as long as the databases remain installed because else a new install
-would have no access. This file should be used like:
-	mysqladmin --defaults-file=/etc/mysql/debian.cnf restart
-to avoid providing the password in plaintext on a commandline where it would 
-be visible to any user via the "ps" command.
-
-## When to start the daemon?
-We aim to give the admin full control on when MySQL is running.
-Issues to be faced here:
-OLD:
-        1. Debconf asks whether MySQL should be started on boot so update-rc.d is
-           only run if the answer has been yes. The admin is likely to forget
-           this decision but update-rc.d checks for an existing line in
-           /etc/runlevel.conf and leaves it intact.
-        2. On initial install, if the answer is yes, the daemon has to be started.
-        3. On upgrades it should only be started if it was already running, everything
-           else is confusing. Especiall relying on an debconf decision made month ago
-           is considered suboptimal. See bug #274264
-        Implementation so far:
-        prerm (called on upgrade before stopping the server): 
-          check for a running server and set flag if necessary
-        preinst (called on initial install and before unpacking when upgrading):
-          check for the debconf variable and set flag if necessary
-        postinst (called on initial install and after each upgrade after unpacking):
-          call update-rc.d if debconf says yes
-          call invoce-rc.d if the flag has been set
-        Problems remaining:
-          dpkg-reconfigure and setting mysql start on boot to yes did not start mysql
-          (ok "start on boot" literally does not mean "start now" so that might have been ok)
-NEW:
-        1. --- no debconf anymore for the sake of simplicity. We have runlevel.conf,
-           the admin should use it
-        2. On initial install the server is started.
-        3. On upgrades the server is started exactly if it was running before so the
-           runlevel configuration is irrelevant. It will be preserved by the mean of
-           update-rc.d's builtin check.
-        Implementation:
-        prerm (called on upgrade before stopping the server):
-          check for a running server and set flag if necessary
-        preinst (called on initial install and before unpacking when upgrading):
-          check for $1 beeing (initial) "install" and set flag
-        postinst (called on initial install and after each upgrade after unpacking):
-          call update-rc.d
-          call invoce-rc.d if the flag has been set

build/debian/additions/Docs__Images__Makefile.in

-all:
-
-distclean:
-	-rm -f Makefile
-
-.PHONY: all distclean clean install check

build/debian/additions/Docs__Makefile.in

-all:
-
-distclean:
-	-rm -f Makefile
-
-.PHONY: all distclean clean install check

build/debian/additions/debian-start

-#!/bin/bash
-#
-# This script is executed by "/etc/init.d/mysql" on every (re)start.
-# 
-# Changes to this file will be preserved when updating the Debian package.
-#
-
-source /usr/share/mysql/debian-start.inc.sh
-
-MYSQL="/usr/bin/mysql --defaults-file=/etc/mysql/debian.cnf"
-MYADMIN="/usr/bin/mysqladmin --defaults-file=/etc/mysql/debian.cnf"
-MYUPGRADE="/usr/bin/mysql_upgrade --defaults-extra-file=/etc/mysql/debian.cnf"
-MYCHECK="/usr/bin/mysqlcheck --defaults-file=/etc/mysql/debian.cnf"
-MYCHECK_SUBJECT="WARNING: mysqlcheck has found corrupt tables"
-MYCHECK_PARAMS="--all-databases --fast --silent"
-MYCHECK_RCPT="root"
-
-# The following commands should be run when the server is up but in background
-# where they do not block the server start and in one shell instance so that
-# they run sequentially. They are supposed not to echo anything to stdout.
-# If you want to disable the check for crashed tables comment
-# "check_for_crashed_tables" out.  
-# (There may be no output to stdout inside the background process!)
-echo "Checking for corrupt, not cleanly closed and upgrade needing tables."
-(
-  upgrade_system_tables_if_necessary;
-  check_root_accounts;
-  check_for_crashed_tables;
-) >&2 &
-
-exit 0

build/debian/additions/echo_stderr

-#!/bin/bash
-echo "$*" 1>&2

build/debian/additions/msql2mysql.1

-.TH mysql 1 "17 March 2003" "MySQL 3.23" "MySQL database"
-.SH NAME
-msql2mysql \- MySQL importer for msql style data.
-.SH SYNOPSIS
-msql2mysql [options]
-.SH DESCRIPTION
-This program imports old msql database files.
-
-For more information start the program with '--help'.
-.SH "SEE ALSO"
-mysql (1), mysqld (1)
-.SH AUTHOR
-This manpage was written by Christian Hammers <ch@debian.org>.
-
-MySQL is available at http://www.mysql.com/.
-.\" end of man page

build/debian/additions/my_print_defaults.1

-.TH mysql 1 "17 March 2003" "MySQL 3.23" "MySQL database"
-.SH NAME
-my_print_defaults \- MySQL helper script that prints defaults.
-.SH SYNOPSIS
-my_print_defaults [options]
-.SH DESCRIPTION
-Prints all arguments that is give to some program using the default files.
-
-For more information start the program with '--help'.
-.SH "SEE ALSO"
-mysql (1), mysqld (1)
-.SH AUTHOR
-This manpage was written by Christian Hammers <ch@debian.org>.
-
-MySQL is available at http://www.mysql.com/.
-.\" end of man page

build/debian/additions/myisam_ftdump.1

-.TH mysql 1 "17 March 2003" "MySQL 3.23" "MySQL database"
-.SH NAME
-myisam_ftdump \- Dumps full text tables.
-.SH SYNOPSIS
-myisam_ftdump [options]
-.SH DESCRIPTION
-Dumps information and contents of full text tables.
-
-For more information start the program with '--help'.
-.SH "SEE ALSO"
-mysql (1), mysqld (1)
-.SH AUTHOR
-This manpage was written by Christian Hammers <ch@debian.org>.
-
-MySQL is available at http://www.mysql.com/.
-.\" end of man page

build/debian/additions/mysql-server.lintian-overrides

-W: mysql-dfsg source: maintainer-script-lacks-debhelper-token debian/percona-xtradb-server.postinst
-W: percona-xtradb-server: possible-bashism-in-maintainer-script postinst:68 'p{("a".."z","A".."Z",0..9)[int(rand(62))]}'

build/debian/additions/mysqld_safe_syslog.cnf

-[mysqld_safe]
-syslog

build/debian/compat

-4

build/debian/libpercona-xtradb-client-dev.README.Maintainer

-The examples directory includes files that might be needed by some
-developers:
-- header files not installed by default
-- the example file udf_example.c

build/debian/libpercona-xtradb-client-dev.dirs

-usr/include/
-usr/lib/