Skip to content

M
mariadb
Commit b0e77d62 authored by Luis Soares's avatar Luis Soares
Browse files
Options

BUG#46166 

Merging to latest mysql-5.5-bugteam.
parents 3237e490 16b2ca1f
Show whitespace changes
Inline Side-by-side
Showing with 974 additions and 85 deletions
mysql-test/include/io_thd_fault_injection.inc 0 → 100644
View file @ b0e77d62
#
# Takes the flag as an argument:
# -- let $io_thd_injection_fault_flag=+d,fault_injection_new_file_rotate_event
# -- source include/io_thd_fault_injection.inc
#
SET @old_debug=@@global.debug;
-- disable_warnings
-- source include/stop_slave.inc
-- enable_warnings
-- eval SET GLOBAL debug="+d,$io_thd_injection_fault_flag"
START SLAVE io_thread;
-- source include/wait_for_slave_io_to_stop.inc
-- source include/wait_for_slave_io_error.inc
-- eval SET GLOBAL debug="-d,$io_thd_injection_fault_flag"
SET GLOBAL debug=@old_debug;
# restart because slave is in bad shape
-- source include/restart_mysqld.inc
mysql-test/include/restart_mysqld.inc
View file @ b0e77d62
# Write file to make mysql-test-run.pl expect the "crash", but don't start
# it until it's told to
--exec echo "wait" > $MYSQLTEST_VARDIR/tmp/mysqld.1.expect
--let $_server_id= `SELECT @@server_id`
--let $_expect_file_name= $MYSQLTEST_VARDIR/tmp/mysqld.$_server_id.expect
--exec echo "wait" > $_expect_file_name
# Send shutdown to the connected server and give
# it 10 seconds to die before zapping it
shutdown_server 10;
# Write file to make mysql-test-run.pl start up the server again
--exec echo "restart" > $MYSQLTEST_VARDIR/tmp/mysqld.1.expect
--exec echo "restart" > $_expect_file_name
# Turn on reconnect
--enable_reconnect
......
mysql-test/suite/binlog/r/binlog_index.result
View file @ b0e77d62
......@@ -2,7 +2,9 @@ call mtr.add_suppression('Attempting backtrace');
call mtr.add_suppression('MSYQL_BIN_LOG::purge_logs failed to process registered files that would be purged.');
call mtr.add_suppression('MSYQL_BIN_LOG::open failed to sync the index file');
call mtr.add_suppression('Turning logging off for the whole duration of the MySQL server process.');
call mtr.add_suppression('Could not open .*');
call mtr.add_suppression('MSYQL_BIN_LOG::purge_logs failed to clean registers before purging logs.');
RESET MASTER;
flush logs;
flush logs;
flush logs;
......@@ -116,11 +118,31 @@ master-bin.000011
# This should put the server in unsafe state and stop
# accepting any command. If we inject a fault at this
# point and continue the execution the server crashes.
# Besides the flush command does not report an error.
#
SET @index=LOAD_FILE('MYSQLTEST_VARDIR/mysqld.1/data//master-bin.index');
SELECT @index;
@index
master-bin.000006
master-bin.000007
master-bin.000008
master-bin.000009
master-bin.000010
master-bin.000011
# fault_injection_registering_index
SET SESSION debug="+d,fault_injection_registering_index";
flush logs;
ERROR HY000: Can't open file: './master-bin.000012' (errno: 1)
SET @index=LOAD_FILE('MYSQLTEST_VARDIR/mysqld.1/data//master-bin.index');
SELECT @index;
@index
master-bin.000006
master-bin.000007
master-bin.000008
master-bin.000009
master-bin.000010
master-bin.000011
SET @index=LOAD_FILE('MYSQLTEST_VARDIR/mysqld.1/data//master-bin.index');
SELECT @index;
@index
......@@ -135,6 +157,18 @@ master-bin.000012
# fault_injection_updating_index
SET SESSION debug="+d,fault_injection_updating_index";
flush logs;
ERROR HY000: Can't open file: './master-bin.000013' (errno: 1)
SET @index=LOAD_FILE('MYSQLTEST_VARDIR/mysqld.1/data//master-bin.index');
SELECT @index;
@index
master-bin.000006
master-bin.000007
master-bin.000008
master-bin.000009
master-bin.000010
master-bin.000011
master-bin.000012
SET @index=LOAD_FILE('MYSQLTEST_VARDIR/mysqld.1/data//master-bin.index');
SELECT @index;
@index
......
mysql-test/suite/binlog/r/binlog_max_extension.result
View file @ b0e77d62
......@@ -3,6 +3,5 @@ call mtr.add_suppression("Log filename extension number exhausted:");
call mtr.add_suppression("Can't generate a unique log-filename");
RESET MASTER;
FLUSH LOGS;
Warnings:
Warning 1098 Can't generate a unique log-filename master-bin.(1-999)
ERROR HY000: Can't generate a unique log-filename master-bin.(1-999)
mysql-test/suite/binlog/t/binlog_index.test
View file @ b0e77d62
......@@ -10,9 +10,12 @@ call mtr.add_suppression('Attempting backtrace');
call mtr.add_suppression('MSYQL_BIN_LOG::purge_logs failed to process registered files that would be purged.');
call mtr.add_suppression('MSYQL_BIN_LOG::open failed to sync the index file');
call mtr.add_suppression('Turning logging off for the whole duration of the MySQL server process.');
call mtr.add_suppression('Could not open .*');
call mtr.add_suppression('MSYQL_BIN_LOG::purge_logs failed to clean registers before purging logs.');
let $old=`select @@debug`;
RESET MASTER;
let $MYSQLD_DATADIR= `select @@datadir`;
let $INDEX=$MYSQLD_DATADIR/master-bin.index;
......@@ -205,12 +208,25 @@ SELECT @index;
--echo # This should put the server in unsafe state and stop
--echo # accepting any command. If we inject a fault at this
--echo # point and continue the execution the server crashes.
--echo # Besides the flush command does not report an error.
--echo #
--chmod 0644 $INDEX
-- replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
-- eval SET @index=LOAD_FILE('$index')
-- replace_regex /\.[\\\/]master/master/
SELECT @index;
--echo # fault_injection_registering_index
SET SESSION debug="+d,fault_injection_registering_index";
-- error ER_CANT_OPEN_FILE
flush logs;
--chmod 0644 $INDEX
-- replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
-- eval SET @index=LOAD_FILE('$index')
-- replace_regex /\.[\\\/]master/master/
SELECT @index;
--source include/restart_mysqld.inc
--chmod 0644 $INDEX
......@@ -221,7 +237,15 @@ SELECT @index;
--echo # fault_injection_updating_index
SET SESSION debug="+d,fault_injection_updating_index";
-- error ER_CANT_OPEN_FILE
flush logs;
--chmod 0644 $INDEX
-- replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
-- eval SET @index=LOAD_FILE('$index')
-- replace_regex /\.[\\\/]master/master/
SELECT @index;
--source include/restart_mysqld.inc
--chmod 0644 $INDEX
......
mysql-test/suite/binlog/t/binlog_max_extension.test
View file @ b0e77d62
......@@ -58,7 +58,8 @@ EOF
# Assertion
###########
# assertion: should throw warning
# assertion: should raise error
-- error ER_NO_UNIQUE_LOGFILE
FLUSH LOGS;
##############
......
mysql-test/suite/rpl/r/rpl_binlog_errors.result 0 → 100644
View file @ b0e77d62
stop slave;
drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
reset master;
reset slave;
drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
start slave;
#######################################################################
####################### PART 1: MASTER TESTS ##########################
#######################################################################
include/stop_slave.inc
call mtr.add_suppression("Can't generate a unique log-filename");
call mtr.add_suppression("Writing one row to the row-based binary log failed.*");
call mtr.add_suppression("Error writing file .*");
SET @old_debug= @@global.debug;
SELECT repeat('x',8192) INTO OUTFILE 'MYSQLTEST_VARDIR/tmp/bug_46166.data';
SELECT repeat('x',10) INTO OUTFILE 'MYSQLTEST_VARDIR/tmp/bug_46166-2.data';
RESET MASTER;
###################### TEST #1
FLUSH LOGS;
# assert: must show two binlogs
show binary logs;
Log_name File_size
master-bin.000001 #
master-bin.000002 #
###################### TEST #2
RESET MASTER;
SET GLOBAL debug="+d,error_unique_log_filename";
FLUSH LOGS;
ERROR HY000: Can't generate a unique log-filename master-bin.(1-999)
# assert: must show one binlog
show binary logs;
Log_name File_size
master-bin.000001 #
SET GLOBAL debug="";
RESET MASTER;
###################### TEST #3
CREATE TABLE t1 (a int);
CREATE TABLE t2 (a TEXT) Engine=InnoDB;
CREATE TABLE t4 (a TEXT);
INSERT INTO t1 VALUES (1);
RESET MASTER;
LOAD DATA INFILE 'MYSQLTEST_VARDIR/tmp/bug_46166.data' INTO TABLE t2;
# assert: must show two binlog
show binary logs;
Log_name File_size
master-bin.000001 #
master-bin.000002 #
SET GLOBAL debug="-d,error_unique_log_filename";
DELETE FROM t2;
RESET MASTER;
###################### TEST #4
SET GLOBAL debug="+d,error_unique_log_filename";
LOAD DATA INFILE 'MYSQLTEST_VARDIR/tmp/bug_46166.data' INTO TABLE t2;
ERROR HY000: Can't generate a unique log-filename master-bin.(1-999)
# assert: must show one entry
SELECT count(*) FROM t2;
count(*)
1
SET GLOBAL debug="-d,error_unique_log_filename";
DELETE FROM t2;
RESET MASTER;
###################### TEST #5
SET GLOBAL debug="+d,error_unique_log_filename";
LOAD DATA INFILE 'MYSQLTEST_VARDIR/tmp/bug_46166-2.data' INTO TABLE t2;
# assert: must show one entry
SELECT count(*) FROM t2;
count(*)
1
SET GLOBAL debug="-d,error_unique_log_filename";
DELETE FROM t2;
RESET MASTER;
###################### TEST #6
SET GLOBAL debug="+d,error_unique_log_filename";
SET AUTOCOMMIT=0;
INSERT INTO t2 VALUES ('muse');
LOAD DATA INFILE 'MYSQLTEST_VARDIR/tmp/bug_46166.data' INTO TABLE t2;
INSERT INTO t2 VALUES ('muse');
COMMIT;
ERROR HY000: Can't generate a unique log-filename master-bin.(1-999)
# assert: must show three entries
SELECT count(*) FROM t2;
count(*)
3
SET AUTOCOMMIT= 1;
SET GLOBAL debug="-d,error_unique_log_filename";
DELETE FROM t2;
RESET MASTER;
###################### TEST #7
SET GLOBAL debug="+d,error_unique_log_filename";
SELECT count(*) FROM t4;
count(*)
0
LOAD DATA INFILE 'MYSQLTEST_VARDIR/tmp/bug_46166.data' INTO TABLE t4;
ERROR HY000: Can't generate a unique log-filename master-bin.(1-999)
# assert: must show 1 entry
SELECT count(*) FROM t4;
count(*)
1
### check that the incident event is written to the current log
SET GLOBAL debug="-d,error_unique_log_filename";
FLUSH LOGS;
SHOW BINLOG EVENTS IN 'BINLOG_FILE' FROM <binlog_start> LIMIT 1;
Log_name Pos Event_type Server_id End_log_pos Info
BINLOG_FILE # Incident # # #1 (LOST_EVENTS)
DELETE FROM t4;
RESET MASTER;
###################### TEST #8
SET GLOBAL debug="+d,error_unique_log_filename";
# must show 0 entries
SELECT count(*) FROM t4;
count(*)
0
SELECT count(*) FROM t2;
count(*)
0
LOAD DATA INFILE 'MYSQLTEST_VARDIR/tmp/bug_46166.data' INTO TABLE t4;
ERROR HY000: Can't generate a unique log-filename master-bin.(1-999)
LOAD DATA INFILE 'MYSQLTEST_VARDIR/tmp/bug_46166.data' INTO TABLE t2;
ERROR HY000: Can't generate a unique log-filename master-bin.(1-999)
INSERT INTO t2 VALUES ('aaa'), ('bbb'), ('ccc');
ERROR HY000: Can't generate a unique log-filename master-bin.(1-999)
# INFO: Count(*) Before Offending DELETEs
# assert: must show 1 entry
SELECT count(*) FROM t4;
count(*)
1
# assert: must show 4 entries
SELECT count(*) FROM t2;
count(*)
4
DELETE FROM t4;
ERROR HY000: Can't generate a unique log-filename master-bin.(1-999)
DELETE FROM t2;
ERROR HY000: Can't generate a unique log-filename master-bin.(1-999)
# INFO: Count(*) After Offending DELETEs
# assert: must show zero entries
SELECT count(*) FROM t4;
count(*)
0
SELECT count(*) FROM t2;
count(*)
0
SET GLOBAL debug="-d,error_unique_log_filename";
###################### TEST #9
SET GLOBAL debug="+d,error_unique_log_filename";
SET SQL_LOG_BIN=0;
INSERT INTO t2 VALUES ('aaa'), ('bbb'), ('ccc'), ('ddd');
INSERT INTO t4 VALUES ('eee'), ('fff'), ('ggg'), ('hhh');
# assert: must show four entries
SELECT count(*) FROM t2;
count(*)
4
SELECT count(*) FROM t4;
count(*)
4
DELETE FROM t2;
DELETE FROM t4;
# assert: must show zero entries
SELECT count(*) FROM t2;
count(*)
0
SELECT count(*) FROM t4;
count(*)
0
SET SQL_LOG_BIN=1;
SET GLOBAL debug="-d,error_unique_log_filename";
###################### TEST #10
call mtr.add_suppression("MSYQL_BIN_LOG::open failed to sync the index file.");
call mtr.add_suppression("Could not open .*");
RESET MASTER;
SHOW WARNINGS;
Level Code Message
SET GLOBAL debug="+d,fault_injection_registering_index";
FLUSH LOGS;
ERROR HY000: Can't open file: './master-bin.000002' (errno: 1)
SET GLOBAL debug="-d,fault_injection_registering_index";
SHOW BINARY LOGS;
ERROR HY000: You are not using binary logging
CREATE TABLE t5 (a INT);
INSERT INTO t4 VALUES ('bbbbb');
INSERT INTO t2 VALUES ('aaaaa');
DELETE FROM t4;
DELETE FROM t2;
DROP TABLE t5;
###################### TEST #11
SET GLOBAL debug="+d,fault_injection_openning_index";
FLUSH LOGS;
ERROR HY000: Can't open file: './master-bin.index' (errno: 1)
SET GLOBAL debug="-d,fault_injection_openning_index";
RESET MASTER;
ERROR HY000: Binlog closed, cannot RESET MASTER
CREATE TABLE t5 (a INT);
INSERT INTO t4 VALUES ('bbbbb');
INSERT INTO t2 VALUES ('aaaaa');
DELETE FROM t4;
DELETE FROM t2;
DROP TABLE t5;
###################### TEST #12
SET GLOBAL debug="+d,fault_injection_new_file_rotate_event";
FLUSH LOGS;
ERROR HY000: Can't open file: 'master-bin' (errno: 0)
SET GLOBAL debug="-d,fault_injection_new_file_rotate_event";
RESET MASTER;
ERROR HY000: Binlog closed, cannot RESET MASTER
CREATE TABLE t5 (a INT);
INSERT INTO t4 VALUES ('bbbbb');
INSERT INTO t2 VALUES ('aaaaa');
DELETE FROM t4;
DELETE FROM t2;
DROP TABLE t5;
SET GLOBAL debug= @old_debug;
DROP TABLE t1, t2, t4;
RESET MASTER;
include/start_slave.inc
#######################################################################
####################### PART 2: SLAVE TESTS ###########################
#######################################################################
stop slave;
drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
reset master;
reset slave;
drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
start slave;
call mtr.add_suppression("Slave I/O: Relay log write failure: could not queue event from master.*");
call mtr.add_suppression("Error writing file .*");
call mtr.add_suppression("Could not open .*");
call mtr.add_suppression("MSYQL_BIN_LOG::open failed to sync the index file.");
call mtr.add_suppression("Can't generate a unique log-filename .*");
###################### TEST #13
SET @old_debug=@@global.debug;
include/stop_slave.inc
SET GLOBAL debug="+d,error_unique_log_filename";
START SLAVE io_thread;
Last_IO_Error = Relay log write failure: could not queue event from master
SET GLOBAL debug="-d,error_unique_log_filename";
SET GLOBAL debug=@old_debug;
###################### TEST #14
SET @old_debug=@@global.debug;
include/stop_slave.inc
SET GLOBAL debug="+d,fault_injection_new_file_rotate_event";
START SLAVE io_thread;
Last_IO_Error = Relay log write failure: could not queue event from master
SET GLOBAL debug="-d,fault_injection_new_file_rotate_event";
SET GLOBAL debug=@old_debug;
###################### TEST #15
SET @old_debug=@@global.debug;
include/stop_slave.inc
SET GLOBAL debug="+d,fault_injection_registering_index";
START SLAVE io_thread;
Last_IO_Error = Relay log write failure: could not queue event from master
SET GLOBAL debug="-d,fault_injection_registering_index";
SET GLOBAL debug=@old_debug;
###################### TEST #16
SET @old_debug=@@global.debug;
include/stop_slave.inc
SET GLOBAL debug="+d,fault_injection_openning_index";
START SLAVE io_thread;
Last_IO_Error = Relay log write failure: could not queue event from master
SET GLOBAL debug="-d,fault_injection_openning_index";
SET GLOBAL debug=@old_debug;
include/stop_slave.inc
SET GLOBAL debug=@old_debug;
RESET SLAVE;
RESET MASTER;
include/start_slave.inc
mysql-test/suite/rpl/t/rpl_binlog_errors.test 0 → 100644
View file @ b0e77d62
# BUG#46166: MYSQL_BIN_LOG::new_file_impl is not propagating error
# when generating new name.
#
# WHY
# ===
#
# We want to check whether error is reported or not when
# new_file_impl fails (this may happen when rotation is not
# possible because there is some problem finding an
# unique filename).
#
# HOW
# ===
#
# Test cases are documented inline.
-- source include/master-slave.inc
-- source include/have_innodb.inc
-- source include/have_debug.inc
-- echo #######################################################################
-- echo ####################### PART 1: MASTER TESTS ##########################
-- echo #######################################################################
### ACTION: stopping slave as it is not needed for the first part of
### the test
-- connection slave
-- source include/stop_slave.inc
-- connection master
call mtr.add_suppression("Can't generate a unique log-filename");
call mtr.add_suppression("Writing one row to the row-based binary log failed.*");
call mtr.add_suppression("Error writing file .*");
SET @old_debug= @@global.debug;
### ACTION: create a large file (> 4096 bytes) that will be later used
### in LOAD DATA INFILE to check binlog errors in its vacinity
-- let $load_file= $MYSQLTEST_VARDIR/tmp/bug_46166.data
-- let $MYSQLD_DATADIR= `select @@datadir`
-- replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
-- eval SELECT repeat('x',8192) INTO OUTFILE '$load_file'
### ACTION: create a small file (< 4096 bytes) that will be later used
### in LOAD DATA INFILE to check for absence of binlog errors
### when file loading this file does not force flushing and
### rotating the binary log
-- let $load_file2= $MYSQLTEST_VARDIR/tmp/bug_46166-2.data
-- let $MYSQLD_DATADIR= `select @@datadir`
-- replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
-- eval SELECT repeat('x',10) INTO OUTFILE '$load_file2'
RESET MASTER;
-- echo ###################### TEST #1
### ASSERTION: no problem flushing logs (should show two binlogs)
FLUSH LOGS;
-- echo # assert: must show two binlogs
-- source include/show_binary_logs.inc
-- echo ###################### TEST #2
### ASSERTION: check that FLUSH LOGS actually fails and reports
### failure back to the user if find_uniq_filename fails
### (should show just one binlog)
RESET MASTER;
SET GLOBAL debug="+d,error_unique_log_filename";
-- error ER_NO_UNIQUE_LOGFILE
FLUSH LOGS;
-- echo # assert: must show one binlog
-- source include/show_binary_logs.inc
### ACTION: clean up and move to next test
SET GLOBAL debug="";
RESET MASTER;
-- echo ###################### TEST #3
### ACTION: create some tables (t1, t2, t4) and insert some values in
### table t1
CREATE TABLE t1 (a int);
CREATE TABLE t2 (a TEXT) Engine=InnoDB;
CREATE TABLE t4 (a TEXT);
INSERT INTO t1 VALUES (1);
RESET MASTER;
### ASSERTION: we force rotation of the binary log because it exceeds
### the max_binlog_size option (should show two binary
### logs)
-- replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
-- eval LOAD DATA INFILE '$load_file' INTO TABLE t2
# shows two binary logs
-- echo # assert: must show two binlog
-- source include/show_binary_logs.inc
# clean up the table and the binlog to be used in next part of test
SET GLOBAL debug="-d,error_unique_log_filename";
DELETE FROM t2;
RESET MASTER;
-- echo ###################### TEST #4
### ASSERTION: load the big file into a transactional table and check
### that it reports error. The table will contain the
### changes performed despite the fact that it reported an
### error.
SET GLOBAL debug="+d,error_unique_log_filename";
-- replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
-- error ER_NO_UNIQUE_LOGFILE
-- eval LOAD DATA INFILE '$load_file' INTO TABLE t2
# show table
-- echo # assert: must show one entry
SELECT count(*) FROM t2;
# clean up the table and the binlog to be used in next part of test
SET GLOBAL debug="-d,error_unique_log_filename";
DELETE FROM t2;
RESET MASTER;
-- echo ###################### TEST #5
### ASSERTION: load the small file into a transactional table and
### check that it succeeds
SET GLOBAL debug="+d,error_unique_log_filename";
-- replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
-- eval LOAD DATA INFILE '$load_file2' INTO TABLE t2
# show table
-- echo # assert: must show one entry
SELECT count(*) FROM t2;
# clean up the table and the binlog to be used in next part of test
SET GLOBAL debug="-d,error_unique_log_filename";
DELETE FROM t2;
RESET MASTER;
-- echo ###################### TEST #6
### ASSERTION: check that even if one is using a transactional table
### and explicit transactions (no autocommit) if rotation
### fails we get the error. Transaction is not rolledback
### because rotation happens after the commit.
SET GLOBAL debug="+d,error_unique_log_filename";
SET AUTOCOMMIT=0;
INSERT INTO t2 VALUES ('muse');
-- replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
-- eval LOAD DATA INFILE '$load_file' INTO TABLE t2
INSERT INTO t2 VALUES ('muse');
-- error ER_NO_UNIQUE_LOGFILE
COMMIT;
### ACTION: Show the contents of the table after the test
-- echo # assert: must show three entries
SELECT count(*) FROM t2;
### ACTION: clean up and move to the next test
SET AUTOCOMMIT= 1;
SET GLOBAL debug="-d,error_unique_log_filename";
DELETE FROM t2;
RESET MASTER;
-- echo ###################### TEST #7
### ASSERTION: check that on a non-transactional table, if rotation
### fails then an error is reported and an incident event
### is written to the current binary log.
SET GLOBAL debug="+d,error_unique_log_filename";
SELECT count(*) FROM t4;
-- replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
-- error ER_NO_UNIQUE_LOGFILE
-- eval LOAD DATA INFILE '$load_file' INTO TABLE t4
-- echo # assert: must show 1 entry
SELECT count(*) FROM t4;
-- echo ### check that the incident event is written to the current log
SET GLOBAL debug="-d,error_unique_log_filename";
-- let $binlog_start= query_get_value(SHOW MASTER STATUS, Position, 1)
-- let $binlog_file= query_get_value(SHOW MASTER STATUS, File, 1)
# 53 is the size of the incident event, so we start from 22 bytes before the
# current position
-- let $binlog_start = `SELECT $binlog_start - 53`
FLUSH LOGS;
-- replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR $binlog_start <binlog_start> $binlog_file BINLOG_FILE
-- replace_column 2 # 4 # 5 #
-- eval SHOW BINLOG EVENTS IN '$binlog_file' FROM $binlog_start LIMIT 1
# clean up and move to next test
DELETE FROM t4;
RESET MASTER;
-- echo ###################### TEST #8
### ASSERTION: check that statements end up in error but they succeed
### on changing the data.
SET GLOBAL debug="+d,error_unique_log_filename";
-- echo # must show 0 entries
SELECT count(*) FROM t4;
SELECT count(*) FROM t2;
-- replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
-- error ER_NO_UNIQUE_LOGFILE
-- eval LOAD DATA INFILE '$load_file' INTO TABLE t4
-- replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
-- error ER_NO_UNIQUE_LOGFILE
-- eval LOAD DATA INFILE '$load_file' INTO TABLE t2
-- error ER_NO_UNIQUE_LOGFILE
INSERT INTO t2 VALUES ('aaa'), ('bbb'), ('ccc');
-- echo # INFO: Count(*) Before Offending DELETEs
-- echo # assert: must show 1 entry
SELECT count(*) FROM t4;
-- echo # assert: must show 4 entries
SELECT count(*) FROM t2;
-- error ER_NO_UNIQUE_LOGFILE
DELETE FROM t4;
-- error ER_NO_UNIQUE_LOGFILE
DELETE FROM t2;
-- echo # INFO: Count(*) After Offending DELETEs
-- echo # assert: must show zero entries
SELECT count(*) FROM t4;
SELECT count(*) FROM t2;
# remove fault injection
SET GLOBAL debug="-d,error_unique_log_filename";
-- echo ###################### TEST #9
### ASSERTION: check that if we disable binlogging, then statements
### succeed.
SET GLOBAL debug="+d,error_unique_log_filename";
SET SQL_LOG_BIN=0;
INSERT INTO t2 VALUES ('aaa'), ('bbb'), ('ccc'), ('ddd');
INSERT INTO t4 VALUES ('eee'), ('fff'), ('ggg'), ('hhh');
-- echo # assert: must show four entries
SELECT count(*) FROM t2;
SELECT count(*) FROM t4;
DELETE FROM t2;
DELETE FROM t4;
-- echo # assert: must show zero entries
SELECT count(*) FROM t2;
SELECT count(*) FROM t4;
SET SQL_LOG_BIN=1;
SET GLOBAL debug="-d,error_unique_log_filename";
-- echo ###################### TEST #10
### ASSERTION: check that error is reported if there is a failure
### while registering the index file and the binary log
### file or failure to write the rotate event.
call mtr.add_suppression("MSYQL_BIN_LOG::open failed to sync the index file.");
call mtr.add_suppression("Could not open .*");
RESET MASTER;
SHOW WARNINGS;
# +d,fault_injection_registering_index => injects fault on MYSQL_BIN_LOG::open
SET GLOBAL debug="+d,fault_injection_registering_index";
-- error ER_CANT_OPEN_FILE
FLUSH LOGS;
SET GLOBAL debug="-d,fault_injection_registering_index";
-- error ER_NO_BINARY_LOGGING
SHOW BINARY LOGS;
# issue some statements and check that they don't fail
CREATE TABLE t5 (a INT);
INSERT INTO t4 VALUES ('bbbbb');
INSERT INTO t2 VALUES ('aaaaa');
DELETE FROM t4;
DELETE FROM t2;
DROP TABLE t5;
-- echo ###################### TEST #11
### ASSERTION: check that error is reported if there is a failure
### while opening the index file and the binary log file or
### failure to write the rotate event.
# restart the server so that we have binlog again
--source include/restart_mysqld.inc
# +d,fault_injection_openning_index => injects fault on MYSQL_BIN_LOG::open_index_file
SET GLOBAL debug="+d,fault_injection_openning_index";
-- error ER_CANT_OPEN_FILE
FLUSH LOGS;
SET GLOBAL debug="-d,fault_injection_openning_index";
-- error ER_FLUSH_MASTER_BINLOG_CLOSED
RESET MASTER;
# issue some statements and check that they don't fail
CREATE TABLE t5 (a INT);
INSERT INTO t4 VALUES ('bbbbb');
INSERT INTO t2 VALUES ('aaaaa');
DELETE FROM t4;
DELETE FROM t2;
DROP TABLE t5;
# restart the server so that we have binlog again
-- source include/restart_mysqld.inc
-- echo ###################### TEST #12
### ASSERTION: check that error is reported if there is a failure
### while writing the rotate event when creating a new log
### file.
# +d,fault_injection_new_file_rotate_event => injects fault on MYSQL_BIN_LOG::MYSQL_BIN_LOG::new_file_impl
SET GLOBAL debug="+d,fault_injection_new_file_rotate_event";
-- error ER_ERROR_ON_WRITE
FLUSH LOGS;
SET GLOBAL debug="-d,fault_injection_new_file_rotate_event";
-- error ER_FLUSH_MASTER_BINLOG_CLOSED
RESET MASTER;
# issue some statements and check that they don't fail
CREATE TABLE t5 (a INT);
INSERT INTO t4 VALUES ('bbbbb');
INSERT INTO t2 VALUES ('aaaaa');
DELETE FROM t4;
DELETE FROM t2;
DROP TABLE t5;
# restart the server so that we have binlog again
-- source include/restart_mysqld.inc
## clean up
SET GLOBAL debug= @old_debug;
DROP TABLE t1, t2, t4;
RESET MASTER;
# restart slave again
-- connection slave
-- source include/start_slave.inc
-- connection master
-- echo #######################################################################
-- echo ####################### PART 2: SLAVE TESTS ###########################
-- echo #######################################################################
### setup
-- connection master
# master-slave-reset starts the slave automatically
-- source include/master-slave-reset.inc
-- connection slave
# slave suppressions
call mtr.add_suppression("Slave I/O: Relay log write failure: could not queue event from master.*");
call mtr.add_suppression("Error writing file .*");
call mtr.add_suppression("Could not open .*");
call mtr.add_suppression("MSYQL_BIN_LOG::open failed to sync the index file.");
call mtr.add_suppression("Can't generate a unique log-filename .*");
-- echo ###################### TEST #13
#### ASSERTION: check against unique log filename error
-- let $io_thd_injection_fault_flag= error_unique_log_filename
-- let $slave_io_errno= 1595
-- let $show_slave_io_error= 1
-- source include/io_thd_fault_injection.inc
-- echo ###################### TEST #14
#### ASSERTION: check against rotate failing
-- let $io_thd_injection_fault_flag= fault_injection_new_file_rotate_event
-- let $slave_io_errno= 1595
-- let $show_slave_io_error= 1
-- source include/io_thd_fault_injection.inc
-- echo ###################### TEST #15
#### ASSERTION: check against relay log open failure
-- let $io_thd_injection_fault_flag= fault_injection_registering_index
-- let $slave_io_errno= 1595
-- let $show_slave_io_error= 1
-- source include/io_thd_fault_injection.inc
-- echo ###################### TEST #16
#### ASSERTION: check against relay log index open failure
-- let $io_thd_injection_fault_flag= fault_injection_openning_index
-- let $slave_io_errno= 1595
-- let $show_slave_io_error= 1
-- source include/io_thd_fault_injection.inc
### clean up
-- disable_warnings
-- source include/stop_slave.inc
-- enable_warnings
SET GLOBAL debug=@old_debug;
RESET SLAVE;
RESET MASTER;
-- source include/start_slave.inc
-- connection master
-- source include/master-slave-end.inc
sql/handler.cc
View file @ b0e77d62
......@@ -1237,7 +1237,11 @@ int ha_commit_trans(THD *thd, bool all)
error=ha_commit_one_phase(thd, all) ? (cookie ? 2 : 1) : 0;
DBUG_EXECUTE_IF("crash_commit_before_unlog", DBUG_SUICIDE(););
if (cookie)
tc_log->unlog(cookie, xid);
if(tc_log->unlog(cookie, xid))
{
error= 2;
goto end;
}
DBUG_EXECUTE_IF("crash_commit_after", DBUG_SUICIDE(););
RUN_HOOK(transaction, after_commit, (thd, FALSE));
end:
......
sql/log.cc
View file @ b0e77d62
......@@ -2185,7 +2185,8 @@ static int find_uniq_filename(char *name)
*end='.';
length= (size_t) (end - start + 1);
if (!(dir_info= my_dir(buff,MYF(MY_DONT_SORT))))
if ((DBUG_EVALUATE_IF("error_unique_log_filename", 1,
!(dir_info= my_dir(buff,MYF(MY_DONT_SORT))))))
{ // This shouldn't happen
strmov(end,".1"); // use name+1
DBUG_RETURN(1);
......@@ -2212,7 +2213,11 @@ updating the index files.", max_found);
}
next= max_found + 1;
sprintf(ext_buf, "%06lu", next);
if (sprintf(ext_buf, "%06lu", next)<0)
{
error= 1;
goto end;
}
*end++='.';
/*
......@@ -2229,7 +2234,11 @@ index files.", name, ext_buf, (strlen(ext_buf) + (end - name)));
goto end;
}
sprintf(end, "%06lu", next);
if (sprintf(end, "%06lu", next)<0)
{
error= 1;
goto end;
}
/* print warning if reaching the end of available extensions. */
if ((next > (MAX_LOG_UNIQUE_FN_EXT - LOG_WARN_UNIQUE_FN_EXT_LEFT)))
......@@ -2462,13 +2471,8 @@ int MYSQL_LOG::generate_new_name(char *new_name, const char *log_name)
{
if (find_uniq_filename(new_name))
{
/*
This should be treated as error once propagation of error further
up in the stack gets proper handling.
*/
push_warning_printf(current_thd, MYSQL_ERROR::WARN_LEVEL_WARN,
ER_NO_UNIQUE_LOGFILE, ER(ER_NO_UNIQUE_LOGFILE),
log_name);
my_printf_error(ER_NO_UNIQUE_LOGFILE, ER(ER_NO_UNIQUE_LOGFILE),
MYF(ME_FATALERROR), log_name);
sql_print_error(ER(ER_NO_UNIQUE_LOGFILE), log_name);
return 1;
}
......@@ -3453,7 +3457,8 @@ bool MYSQL_BIN_LOG::reset_logs(THD* thd)
if (!thd->slave_thread)
need_start_event=1;
if (!open_index_file(index_file_name, 0, FALSE))
open(save_name, log_type, 0, io_cache_type, no_auto_events, max_size, 0, FALSE);
if ((error= open(save_name, log_type, 0, io_cache_type, no_auto_events, max_size, 0, FALSE)))
goto err;
my_free((void *) save_name);
err:
......@@ -4118,17 +4123,23 @@ bool MYSQL_BIN_LOG::is_active(const char *log_file_name_arg)
incapsulation 3) allows external access to the class without
a lock (which is not possible with private new_file_without_locking
method).
@retval
nonzero - error
*/
void MYSQL_BIN_LOG::new_file()
int MYSQL_BIN_LOG::new_file()
{
new_file_impl(1);
return new_file_impl(1);
}
void MYSQL_BIN_LOG::new_file_without_locking()
/*
@retval
nonzero - error
*/
int MYSQL_BIN_LOG::new_file_without_locking()
{
new_file_impl(0);
return new_file_impl(0);
}
......@@ -4137,19 +4148,23 @@ void MYSQL_BIN_LOG::new_file_without_locking()
@param need_lock Set to 1 if caller has not locked LOCK_log
@retval
nonzero - error
@note
The new file name is stored last in the index file
*/
void MYSQL_BIN_LOG::new_file_impl(bool need_lock)
int MYSQL_BIN_LOG::new_file_impl(bool need_lock)
{
char new_name[FN_REFLEN], *new_name_ptr, *old_name;
int error= 0, close_on_error= FALSE;
char new_name[FN_REFLEN], *new_name_ptr, *old_name, *file_to_open;
DBUG_ENTER("MYSQL_BIN_LOG::new_file_impl");
if (!is_open())
{
DBUG_PRINT("info",("log is closed"));
DBUG_VOID_RETURN;
DBUG_RETURN(error);
}
if (need_lock)
......@@ -4187,7 +4202,7 @@ void MYSQL_BIN_LOG::new_file_impl(bool need_lock)
We have to do this here and not in open as we want to store the
new file name in the current binary log file.
*/
if (generate_new_name(new_name, name))
if ((error= generate_new_name(new_name, name)))
goto end;
new_name_ptr=new_name;
......@@ -4201,7 +4216,13 @@ void MYSQL_BIN_LOG::new_file_impl(bool need_lock)
*/
Rotate_log_event r(new_name+dirname_length(new_name),
0, LOG_EVENT_OFFSET, is_relay_log ? Rotate_log_event::RELAY_LOG : 0);
r.write(&log_file);
if(DBUG_EVALUATE_IF("fault_injection_new_file_rotate_event", (error=close_on_error=TRUE), FALSE) ||
(error= r.write(&log_file)))
{
close_on_error= TRUE;
my_printf_error(ER_ERROR_ON_WRITE, ER(ER_CANT_OPEN_FILE), MYF(ME_FATALERROR), name, errno);
goto end;
}
bytes_written += r.data_written;
}
/*
......@@ -4229,17 +4250,56 @@ void MYSQL_BIN_LOG::new_file_impl(bool need_lock)
*/
/* reopen index binlog file, BUG#34582 */
if (!open_index_file(index_file_name, 0, FALSE))
open(old_name, log_type, new_name_ptr,
io_cache_type, no_auto_events, max_size, 1, FALSE);
file_to_open= index_file_name;
error= open_index_file(index_file_name, 0, FALSE);
if (!error)
{
/* reopen the binary log file. */
file_to_open= new_name_ptr;
error= open(old_name, log_type, new_name_ptr, io_cache_type,
no_auto_events, max_size, 1, FALSE);
}
/* handle reopening errors */
if (error)
{
my_printf_error(ER_CANT_OPEN_FILE, ER(ER_CANT_OPEN_FILE),
MYF(ME_FATALERROR), file_to_open, error);
close_on_error= TRUE;
}
my_free(old_name);
end:
if (error && close_on_error /* rotate or reopen failed */)
{
/*
Close whatever was left opened.
We are keeping the behavior as it exists today, ie,
we disable logging and move on (see: BUG#51014).
TODO: as part of WL#1790 consider other approaches:
- kill mysql (safety);
- try multiple locations for opening a log file;
- switch server to protected/readonly mode
- ...
*/
close(LOG_CLOSE_INDEX);
sql_print_error("Could not open %s for logging (error %d). "
"Turning logging off for the whole duration "
"of the MySQL server process. To turn it on "
"again: fix the cause, shutdown the MySQL "
"server and restart it.",
new_name_ptr, errno);
}
if (need_lock)
mysql_mutex_unlock(&LOCK_log);
mysql_mutex_unlock(&LOCK_index);
DBUG_VOID_RETURN;
DBUG_RETURN(error);
}
......@@ -4264,8 +4324,7 @@ bool MYSQL_BIN_LOG::append(Log_event* ev)
if (flush_and_sync(0))
goto err;
if ((uint) my_b_append_tell(&log_file) > max_size)
new_file_without_locking();
error= new_file_without_locking();
err:
mysql_mutex_unlock(&LOCK_log);
signal_update(); // Safe as we don't call close
......@@ -4296,8 +4355,7 @@ bool MYSQL_BIN_LOG::appendv(const char* buf, uint len,...)
if (flush_and_sync(0))
goto err;
if ((uint) my_b_append_tell(&log_file) > max_size)
new_file_without_locking();
error= new_file_without_locking();
err:
if (!error)
signal_update();
......@@ -4920,7 +4978,6 @@ bool MYSQL_BIN_LOG::write(Log_event *event_info)
goto err;
error= 0;
err:
if (event_info->use_direct_logging())
{
......@@ -5025,8 +5082,19 @@ bool general_log_write(THD *thd, enum enum_server_command command,
return FALSE;
}
void MYSQL_BIN_LOG::rotate_and_purge(uint flags)
/**
@note
If rotation fails, for instance the server was unable
to create a new log file, we still try to write an
incident event to the current log.
@retval
nonzero - error
*/
int MYSQL_BIN_LOG::rotate_and_purge(uint flags)
{
int error= 0;
DBUG_ENTER("MYSQL_BIN_LOG::rotate_and_purge");
#ifdef HAVE_REPLICATION
bool check_purge= false;
#endif
......@@ -5035,26 +5103,38 @@ void MYSQL_BIN_LOG::rotate_and_purge(uint flags)
if ((flags & RP_FORCE_ROTATE) ||
(my_b_tell(&log_file) >= (my_off_t) max_size))
{
new_file_without_locking();
if ((error= new_file_without_locking()))
/**
Be conservative... There are possible lost events (eg,
failing to log the Execute_load_query_log_event
on a LOAD DATA while using a non-transactional
table)!
We give it a shot and try to write an incident event anyway
to the current log.
*/
if (!write_incident(current_thd, FALSE))
flush_and_sync(0);
#ifdef HAVE_REPLICATION
check_purge= true;
#endif
}
if (!(flags & RP_LOCK_LOG_IS_ALREADY_LOCKED))
mysql_mutex_unlock(&LOCK_log);
#ifdef HAVE_REPLICATION
/*
NOTE: Run purge_logs wo/ holding LOCK_log
as it otherwise will deadlock in ndbcluster_binlog_index_purge_file
*/
if (check_purge && expire_logs_days)
if (!error && check_purge && expire_logs_days)
{
time_t purge_time= my_time(0) - expire_logs_days*24*60*60;
if (purge_time >= 0)
purge_logs_before_date(purge_time);
}
#endif
DBUG_RETURN(error);
}
uint MYSQL_BIN_LOG::next_file_id()
......@@ -5240,6 +5320,10 @@ bool MYSQL_BIN_LOG::write_incident(THD *thd, bool lock)
{
uint error= 0;
DBUG_ENTER("MYSQL_BIN_LOG::write_incident");
if (!is_open())
DBUG_RETURN(error);
LEX_STRING const write_error_msg=
{ C_STRING_WITH_LEN("error writing to the binary log") };
Incident incident= INCIDENT_LOST_EVENTS;
......@@ -5252,7 +5336,7 @@ bool MYSQL_BIN_LOG::write_incident(THD *thd, bool lock)
if (!error && !(error= flush_and_sync(0)))
{
signal_update();
rotate_and_purge(RP_LOCK_LOG_IS_ALREADY_LOCKED);
error= rotate_and_purge(RP_LOCK_LOG_IS_ALREADY_LOCKED);
}
mysql_mutex_unlock(&LOCK_log);
}
......@@ -5361,7 +5445,8 @@ bool MYSQL_BIN_LOG::write(THD *thd, IO_CACHE *cache, Log_event *commit_event,
mysql_mutex_unlock(&LOCK_prep_xids);
}
else
rotate_and_purge(RP_LOCK_LOG_IS_ALREADY_LOCKED);
if (rotate_and_purge(RP_LOCK_LOG_IS_ALREADY_LOCKED))
goto err;
}
mysql_mutex_unlock(&LOCK_log);
......@@ -6194,7 +6279,7 @@ int TC_LOG_MMAP::sync()
cookie points directly to the memory where xid was logged.
*/
void TC_LOG_MMAP::unlog(ulong cookie, my_xid xid)
int TC_LOG_MMAP::unlog(ulong cookie, my_xid xid)
{
PAGE *p=pages+(cookie/tc_log_page_size);
my_xid *x=(my_xid *)(data+cookie);
......@@ -6212,6 +6297,7 @@ void TC_LOG_MMAP::unlog(ulong cookie, my_xid xid)
if (p->waiters == 0) // the page is in pool and ready to rock
mysql_cond_signal(&COND_pool); // ping ... for overflow()
mysql_mutex_unlock(&p->lock);
return 0;
}
void TC_LOG_MMAP::close()
......@@ -6454,8 +6540,9 @@ int TC_LOG_BINLOG::log_xid(THD *thd, my_xid xid)
!binlog_commit_flush_trx_cache(thd, cache_mngr, xid));
}
void TC_LOG_BINLOG::unlog(ulong cookie, my_xid xid)
int TC_LOG_BINLOG::unlog(ulong cookie, my_xid xid)
{
DBUG_ENTER("TC_LOG_BINLOG::unlog");
mysql_mutex_lock(&LOCK_prep_xids);
DBUG_ASSERT(prepared_xids > 0);
if (--prepared_xids == 0) {
......@@ -6463,7 +6550,7 @@ void TC_LOG_BINLOG::unlog(ulong cookie, my_xid xid)
mysql_cond_signal(&COND_prep_xids);
}
mysql_mutex_unlock(&LOCK_prep_xids);
rotate_and_purge(0); // as ::write() did not rotate
DBUG_RETURN(rotate_and_purge(0)); // as ::write() did not rotate
}
int TC_LOG_BINLOG::recover(IO_CACHE *log, Format_description_log_event *fdle)
......
sql/log.h
View file @ b0e77d62
......@@ -45,7 +45,7 @@ class TC_LOG
virtual int open(const char *opt_name)=0;
virtual void close()=0;
virtual int log_xid(THD *thd, my_xid xid)=0;
virtual void unlog(ulong cookie, my_xid xid)=0;
virtual int unlog(ulong cookie, my_xid xid)=0;
};
class TC_LOG_DUMMY: public TC_LOG // use it to disable the logging
......@@ -55,7 +55,7 @@ public:
int open(const char *opt_name) { return 0; }
void close() { }
int log_xid(THD *thd, my_xid xid) { return 1; }
void unlog(ulong cookie, my_xid xid) { }
int unlog(ulong cookie, my_xid xid) { return 0; }
};
#ifdef HAVE_MMAP
......@@ -100,7 +100,7 @@ class TC_LOG_MMAP: public TC_LOG
int open(const char *opt_name);
void close();
int log_xid(THD *thd, my_xid xid);
void unlog(ulong cookie, my_xid xid);
int unlog(ulong cookie, my_xid xid);
int recover();
private:
......@@ -334,8 +334,8 @@ class MYSQL_BIN_LOG: public TC_LOG, private MYSQL_LOG
new_file() is locking. new_file_without_locking() does not acquire
LOCK_log.
*/
void new_file_without_locking();
void new_file_impl(bool need_lock);
int new_file_without_locking();
int new_file_impl(bool need_lock);
public:
MYSQL_LOG::generate_name;
......@@ -365,7 +365,7 @@ public:
int open(const char *opt_name);
void close();
int log_xid(THD *thd, my_xid xid);
void unlog(ulong cookie, my_xid xid);
int unlog(ulong cookie, my_xid xid);
int recover(IO_CACHE *log, Format_description_log_event *fdle);
#if !defined(MYSQL_CLIENT)
......@@ -408,7 +408,7 @@ public:
bool open_index_file(const char *index_file_name_arg,
const char *log_name, bool need_mutex);
/* Use this to start writing a new log file */
void new_file();
int new_file();
bool write(Log_event* event_info); // binary log write
bool write(THD *thd, IO_CACHE *cache, Log_event *commit_event, bool incident);
......@@ -432,7 +432,7 @@ public:
void make_log_name(char* buf, const char* log_ident);
bool is_active(const char* log_file_name);
int update_log_index(LOG_INFO* linfo, bool need_update_threads);
void rotate_and_purge(uint flags);
int rotate_and_purge(uint flags);
/**
Flush binlog cache and synchronize to disk.
......
sql/mysqld.cc
View file @ b0e77d62
......@@ -2736,7 +2736,7 @@ pthread_handler_t signal_hand(void *arg __attribute__((unused)))
case SIGHUP:
if (!abort_loop)
{
bool not_used;
int not_used;
mysql_print_status(); // Print some debug info
reload_acl_and_cache((THD*) 0,
(REFRESH_LOG | REFRESH_TABLES | REFRESH_FAST |
......
sql/rpl_injector.cc
View file @ b0e77d62
......@@ -237,8 +237,7 @@ int injector::record_incident(THD *thd, Incident incident)
Incident_log_event ev(thd, incident);
if (int error= mysql_bin_log.write(&ev))
return error;
mysql_bin_log.rotate_and_purge(RP_FORCE_ROTATE);
return 0;
return mysql_bin_log.rotate_and_purge(RP_FORCE_ROTATE);
}
int injector::record_incident(THD *thd, Incident incident, LEX_STRING const message)
......@@ -246,6 +245,5 @@ int injector::record_incident(THD *thd, Incident incident, LEX_STRING const mess
Incident_log_event ev(thd, incident, message);
if (int error= mysql_bin_log.write(&ev))
return error;
mysql_bin_log.rotate_and_purge(RP_FORCE_ROTATE);
return 0;
return mysql_bin_log.rotate_and_purge(RP_FORCE_ROTATE);
}
sql/slave.cc
View file @ b0e77d62
......@@ -523,7 +523,8 @@ int terminate_slave_threads(Master_info* mi,int thread_mask,bool skip_lock)
if (flush_master_info(mi, TRUE, FALSE))
DBUG_RETURN(ER_ERROR_DURING_FLUSH_LOGS);
if (my_sync(mi->rli.relay_log.get_log_file()->file, MYF(MY_WME)))
if (mi->rli.relay_log.is_open() &&
my_sync(mi->rli.relay_log.get_log_file()->file, MYF(MY_WME)))
DBUG_RETURN(ER_ERROR_DURING_FLUSH_LOGS);
if (my_sync(mi->fd, MYF(MY_WME)))
......@@ -3632,8 +3633,7 @@ static int process_io_rotate(Master_info *mi, Rotate_log_event *rev)
Rotate the relay log makes binlog format detection easier (at next slave
start or mysqlbinlog)
*/
rotate_relay_log(mi); /* will take the right mutexes */
DBUG_RETURN(0);
DBUG_RETURN(rotate_relay_log(mi) /* will take the right mutexes */);
}
/*
......@@ -4870,12 +4870,13 @@ err:
is void).
*/
void rotate_relay_log(Master_info* mi)
int rotate_relay_log(Master_info* mi)
{
DBUG_ENTER("rotate_relay_log");
Relay_log_info* rli= &mi->rli;
int error= 0;
DBUG_EXECUTE_IF("crash_before_rotate_relaylog", abort(););
DBUG_EXECUTE_IF("crash_before_rotate_relaylog", DBUG_SUICIDE(););
/*
We need to test inited because otherwise, new_file() will attempt to lock
......@@ -4888,7 +4889,8 @@ void rotate_relay_log(Master_info* mi)
}
/* If the relay log is closed, new_file() will do nothing. */
rli->relay_log.new_file();
if ((error= rli->relay_log.new_file()))
goto end;
/*
We harvest now, because otherwise BIN_LOG_HEADER_SIZE will not immediately
......@@ -4905,7 +4907,7 @@ void rotate_relay_log(Master_info* mi)
*/
rli->relay_log.harvest_bytes_written(&rli->log_space_total);
end:
DBUG_VOID_RETURN;
DBUG_RETURN(error);
}
......
sql/slave.h
View file @ b0e77d62
......@@ -205,7 +205,7 @@ int purge_relay_logs(Relay_log_info* rli, THD *thd, bool just_reset,
const char** errmsg);
void set_slave_thread_options(THD* thd);
void set_slave_thread_default_charset(THD *thd, Relay_log_info const *rli);
void rotate_relay_log(Master_info* mi);
int rotate_relay_log(Master_info* mi);
int apply_event_and_update_pos(Log_event* ev, THD* thd, Relay_log_info* rli);
pthread_handler_t handle_slave_io(void *arg);
......
sql/sql_load.cc
View file @ b0e77d62
......@@ -625,6 +625,13 @@ int mysql_load(THD *thd,sql_exchange *ex,TABLE_LIST *table_list,
transactional_table,
errcode);
}
/*
Flushing the IO CACHE while writing the execute load query log event
may result in error (for instance, because the max_binlog_size has been
reached, and rotation of the binary log failed).
*/
error= error || mysql_bin_log.get_log_file()->error;
}
if (error)
goto err;
......
sql/sql_parse.cc
View file @ b0e77d62
......@@ -1218,7 +1218,7 @@ bool dispatch_command(enum enum_server_command command, THD *thd,
#endif
case COM_REFRESH:
{
bool not_used;
int not_used;
status_var_increment(thd->status_var.com_stat[SQLCOM_FLUSH]);
ulong options= (ulong) (uchar) packet[0];
if (trans_commit_implicit(thd))
......@@ -2780,7 +2780,11 @@ end_with_restore_list:
{
Incident_log_event ev(thd, incident);
(void) mysql_bin_log.write(&ev); /* error is ignored */
mysql_bin_log.rotate_and_purge(RP_FORCE_ROTATE);
if (mysql_bin_log.rotate_and_purge(RP_FORCE_ROTATE))
{
res= 1;
break;
}
}
DBUG_PRINT("debug", ("Just after generate_incident()"));
}
......@@ -3516,8 +3520,7 @@ end_with_restore_list:
lex->no_write_to_binlog= 1;
case SQLCOM_FLUSH:
{
bool write_to_binlog;
int write_to_binlog;
if (check_global_access(thd,RELOAD_ACL))
goto error;
......@@ -3546,11 +3549,21 @@ end_with_restore_list:
/*
Presumably, RESET and binlog writing doesn't require synchronization
*/
if (!lex->no_write_to_binlog && write_to_binlog)
if (write_to_binlog > 0) // we should write
{
if ((res= write_bin_log(thd, FALSE, thd->query(), thd->query_length())))
break;
if (!lex->no_write_to_binlog)
res= write_bin_log(thd, FALSE, thd->query(), thd->query_length());
} else if (write_to_binlog < 0)
{
/*
We should not write, but rather report error because
reload_acl_and_cache binlog interactions failed
*/
res= 1;
}
if (!res)
my_ok(thd);
}
......
sql/sql_reload.cc
View file @ b0e77d62
......@@ -33,7 +33,11 @@
@param thd Thread handler (can be NULL!)
@param options What should be reset/reloaded (tables, privileges, slave...)
@param tables Tables to flush (if any)
@param write_to_binlog True if we can write to the binlog.
@param write_to_binlog < 0 if there was an error while interacting with the binary log inside
reload_acl_and_cache,
0 if we should not write to the binary log,
> 0 if we can write to the binlog.
@note Depending on 'options', it may be very bad to write the
query to the binlog (e.g. FLUSH SLAVE); this is a
......@@ -47,11 +51,11 @@
*/
bool reload_acl_and_cache(THD *thd, unsigned long options,
TABLE_LIST *tables, bool *write_to_binlog)
TABLE_LIST *tables, int *write_to_binlog)
{
bool result=0;
select_errors=0; /* Write if more errors */
bool tmp_write_to_binlog= 1;
int tmp_write_to_binlog= *write_to_binlog= 1;
DBUG_ASSERT(!thd || !thd->in_sub_stmt);
......@@ -136,13 +140,17 @@ bool reload_acl_and_cache(THD *thd, unsigned long options,
*/
tmp_write_to_binlog= 0;
if (mysql_bin_log.is_open())
mysql_bin_log.rotate_and_purge(RP_FORCE_ROTATE);
{
if (mysql_bin_log.rotate_and_purge(RP_FORCE_ROTATE))
*write_to_binlog= -1;
}
}
if (options & REFRESH_RELAY_LOG)
{
#ifdef HAVE_REPLICATION
mysql_mutex_lock(&LOCK_active_mi);
rotate_relay_log(active_mi);
if (rotate_relay_log(active_mi))
*write_to_binlog= -1;
mysql_mutex_unlock(&LOCK_active_mi);
#endif
}
......@@ -274,6 +282,7 @@ bool reload_acl_and_cache(THD *thd, unsigned long options,
#endif
if (options & REFRESH_USER_RESOURCES)
reset_mqh((LEX_USER *) NULL, 0); /* purecov: inspected */
if (*write_to_binlog != -1)
*write_to_binlog= tmp_write_to_binlog;
/*
If the query was killed then this function must fail.
......
sql/sql_reload.h
View file @ b0e77d62
......@@ -19,7 +19,7 @@ class THD;
struct TABLE_LIST;
bool reload_acl_and_cache(THD *thd, unsigned long options,
TABLE_LIST *tables, bool *write_to_binlog);
TABLE_LIST *tables, int *write_to_binlog);
bool flush_tables_with_read_lock(THD *thd, TABLE_LIST *all_tables);
......
sql/sql_repl.cc
View file @ b0e77d62
......@@ -1925,7 +1925,7 @@ bool show_binlogs(THD* thd)
if (!mysql_bin_log.is_open())
{
my_message(ER_NO_BINARY_LOGGING, ER(ER_NO_BINARY_LOGGING), MYF(0));
my_error(ER_NO_BINARY_LOGGING, MYF(0));
DBUG_RETURN(TRUE);
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7