Merge

BitKeeper/etc/logging_ok

@@ -155,6 +155,7 @@ mronstrom@mysql.com
 mskold@bk-internal.mysql.com
 mskold@mysql.com
 msvensson@build.mysql.com
+msvensson@neptunus.(none)
 msvensson@neptunus.homeip.net
 mwagner@cash.mwagner.org
 mwagner@evoq.mwagner.org

VC++Files/libmysqld/libmysqld.dsp

@@ -344,6 +344,10 @@ SOURCE=..\mysys\my_alloc.c
 # End Source File
 # Begin Source File
 
+SOURCE=..\mysys\my_decimal.cpp
+# End Source File
+# Begin Source File
+
 SOURCE=..\mysys\my_getopt.c
 # End Source File
 # Begin Source File

VC++Files/sql/mysqld.dsp

@@ -1085,6 +1085,10 @@ SOURCE=.\mf_iocache.cpp
 # End Source File
 # Begin Source File
 
+SOURCE=.\my_decimal.cpp
+# End Source File
+# Begin Source File
+
 SOURCE=.\my_time.c
 # End Source File
 # Begin Source File

VC++Files/strings/strings.dsp

@@ -177,6 +177,10 @@ SOURCE=.\ctype.c
 # End Source File
 # Begin Source File
 
+SOURCE=.\decimal.c
+# End Source File
+# Begin Source File
+
 SOURCE=.\int2str.c
 # End Source File
 # Begin Source File

client/mysqlbinlog.cc

@@ -1100,7 +1100,7 @@ at offset %lu ; this could be a log format error or read error",
           /* EOF can't be hit here normally, so it's a real error */
           die("Could not read a Rotate_log_event event \
 at offset %lu ; this could be a log format error or read error",
-              tmp_pos); 
+              tmp_pos);
       }
       else
         break;
@@ -1169,9 +1169,15 @@ static int dump_local_log_entries(const char* logname)
     Log_event* ev = Log_event::read_log_event(file, description_event);
     if (!ev)
     {
-      if (file->error)
+      /*
+        if binlog wasn't closed properly ("in use" flag is set) don't complain
+        about a corruption, but treat it as EOF and move to the next binlog.
+      */
+      if (description_event->flags & LOG_EVENT_BINLOG_IN_USE_F)
+        file->error= 0;
+      else if (file->error)
       {
-	fprintf(stderr,
+        fprintf(stderr,
                 "Could not read entry at offset %s:"
                 "Error in log format or read error\n",
                 llstr(old_off,llbuff));

configure.in

@@ -1887,7 +1887,7 @@ AC_CHECK_FUNCS(alarm bcmp bfill bmove bzero chsize cuserid fchmod fcntl \
   getcwd gethostbyaddr_r gethostbyname_r getpass getpassphrase getpwnam \
   getpwuid getrlimit getrusage getwd gmtime_r index initgroups isnan \
   localtime_r locking longjmp lrand48 madvise mallinfo memcpy memmove \
-  mkstemp mlockall perror poll pread pthread_attr_create mmap \
+  mkstemp mlockall perror poll pread pthread_attr_create mmap getpagesize \
   pthread_attr_getstacksize pthread_attr_setprio pthread_attr_setschedparam \
   pthread_attr_setstacksize pthread_condattr_create pthread_getsequence_np \
   pthread_key_delete pthread_rwlock_rdlock pthread_setprio \

include/config-win.h

@@ -310,9 +310,6 @@ inline double ulonglong2double(ulonglong value)
 #define HAVE_SETFILEPOINTER
 #define HAVE_VIO
 
-#define HAME_MMAP               /* in mysys/my_mmap.c */
-#define HAVE_GETPAGESIZE        /* in mysys/my_mmap.c */
-
 #ifdef NOT_USED
 #define HAVE_SNPRINTF		/* Gave link error */
 #define _snprintf snprintf
@@ -353,6 +350,8 @@ inline double ulonglong2double(ulonglong value)
 
 #define DO_NOT_REMOVE_THREAD_WRAPPERS
 #define thread_safe_increment(V,L) InterlockedIncrement((long*) &(V))
+#define thread_safe_decrement(V,L) InterlockedDecrement((long*) &(V))
+#define thread_safe_dec_and_test(V, L) thread_safe_decrement(V,L)
 /* The following is only used for statistics, so it should be good enough */
 #ifdef __NT__  /* This should also work on Win98 but .. */
 #define thread_safe_add(V,C,L) InterlockedExchangeAdd((long*) &(V),(C))
@@ -366,6 +365,7 @@ inline double ulonglong2double(ulonglong value)
 #define statistic_add(V,C,L)	 (V)+=(C)
 #endif
 #define statistic_increment(V,L) thread_safe_increment((V),(L))
+#define statistic_decrement(V,L) thread_safe_decrement((V),(L))
 
 #define shared_memory_buffer_length 16000
 #define default_shared_memory_base_name "MYSQL"

include/decimal.h

@@ -17,7 +17,9 @@
 #ifndef _decimal_h
 #define _decimal_h
 
-typedef enum {TRUNCATE=0, HALF_EVEN, HALF_UP, CEILING, FLOOR} decimal_round_mode;
+typedef enum
+{TRUNCATE=0, HALF_EVEN, HALF_UP, CEILING, FLOOR}
+  decimal_round_mode;
 typedef int32 decimal_digit;
 
 typedef struct st_decimal {
@@ -26,11 +28,10 @@ typedef struct st_decimal {
   decimal_digit *buf;
 } decimal;
 
+int internal_str2dec(const char *from, decimal *to, char **end, my_bool fixed);
 int decimal2string(decimal *from, char *to, int *to_len,
                    int fixed_precision, int fixed_decimals,
                    char filler);
-int string2decimal(char *from, decimal *to, char **end);
-int string2decimal_fixed(char *from, decimal *to, char **end);
 int decimal2ulonglong(decimal *from, ulonglong *to);
 int ulonglong2decimal(ulonglong from, decimal *to);
 int decimal2longlong(decimal *from, longlong *to);
@@ -51,10 +52,14 @@ int decimal_cmp(decimal *from1, decimal *from2);
 int decimal_mul(decimal *from1, decimal *from2, decimal *to);
 int decimal_div(decimal *from1, decimal *from2, decimal *to, int scale_incr);
 int decimal_mod(decimal *from1, decimal *from2, decimal *to);
-int decimal_round(decimal *from, decimal *to, int new_scale, decimal_round_mode mode);
+int decimal_round(decimal *from, decimal *to, int new_scale,
+                  decimal_round_mode mode);
 int decimal_is_zero(decimal *from);
 void max_decimal(int precision, int frac, decimal *to);
 
+#define string2decimal(A,B,C) internal_str2dec((A), (B), (C), 0)
+#define string2decimal_fixed(A,B,C) internal_str2dec((A), (B), (C), 1)
+
 /* set a decimal to zero */
 
 #define decimal_make_zero(dec)        do {                \

include/my_global.h

@@ -761,7 +761,7 @@ typedef long		int32;
 #endif
 typedef unsigned long	uint32; /* Short for unsigned integer >= 32 bits */
 #else
-error "Neither int or long is of 4 bytes width"
+#error "Neither int or long is of 4 bytes width"
 #endif
 
 #if !defined(HAVE_ULONG) && !defined(HAVE_LINUXTHREADS) && !defined(__USE_MISC)

include/my_pthread.h

@@ -689,12 +689,12 @@ extern pthread_t shutdown_th, main_th, signal_th;
 #define thread_safe_add(V,C,L) (pthread_mutex_lock((L)), (V)+=(C), pthread_mutex_unlock((L)))
 #define thread_safe_sub(V,C,L) \
         (pthread_mutex_lock((L)), (V)-=(C), pthread_mutex_unlock((L)))
-#if defined (__GNUC__) || defined (__cplusplus)
-static inline bool thread_safe_dec_and_test(ulong V, pthread_mutex_t *L)
+#ifdef __cplusplus
+static inline bool thread_safe_dec_and_test(ulong &V, pthread_mutex_t *L)
 {
   ulong res;
   pthread_mutex_lock(L);
-  res=V--;
+  res=--V;
   pthread_mutex_unlock(L);
   return res==0;
 }

include/my_sys.h

@@ -796,7 +796,7 @@ void my_free_open_file_info(void);
 ulonglong my_getsystime(void);
 my_bool my_gethwaddr(uchar *to);
 
-#ifdef HAVE_MMAP
+#ifdef HAVE_SYS_MMAN_H
 #include <sys/mman.h>
 
 #ifndef MAP_NOSYNC
@@ -811,9 +811,11 @@ my_bool my_gethwaddr(uchar *to);
 /* not a complete set of mmap() flags, but only those that nesessary */
 #define PROT_READ        1
 #define PROT_WRITE       2
-#define MAP_NOSYNC       0x800
+#define MAP_SHARED       0x0001
+#define MAP_NOSYNC       0x0800
 #define MAP_FAILED       ((void *)-1)
 #define MS_SYNC          0x0000
+#define HAVE_MMAP
 
 int my_getpagesize(void);
 void *my_mmap(void *, size_t, int, int, int, my_off_t);

innobase/include/trx0sys.ic

@@ -315,7 +315,7 @@ trx_is_active(
 	}
 
 	if (ut_dulint_cmp(trx_id, trx_sys->max_trx_id) >= 0) {
-		
+
 		/* There must be corruption: we return TRUE because this
 		function is only called by lock_clust_rec_some_has_impl()
 		and row_vers_impl_x_locked_off_kernel() and they have
@@ -325,8 +325,9 @@ trx_is_active(
 	}
 
 	trx = trx_get_on_id(trx_id);
-	if (trx && (trx->conc_state == TRX_ACTIVE)) {
-		
+        if (trx && (trx->conc_state == TRX_ACTIVE ||
+                        trx->conc_state == TRX_PREPARED)) {
+
 		return(TRUE);
 	}
 

innobase/read/read0read.c

@@ -153,10 +153,11 @@ read_view_open_now(
 	/* No active transaction should be visible, except cr_trx */
 
 	while (trx) {
-		if (trx != cr_trx && trx->conc_state == TRX_ACTIVE) {
+                if (trx != cr_trx && (trx->conc_state == TRX_ACTIVE ||
+                                        trx->conc_state == TRX_PREPARED)) {
 
 			read_view_set_nth_trx_id(view, n, trx->id);
-		
+
 			n++;
 
 			/* NOTE that a transaction whose trx number is <
@@ -164,7 +165,7 @@ read_view_open_now(
 			in the middle of its commit! Note that when a
 			transaction starts, we initialize trx->no to
 			ut_dulint_max. */
-		
+
 			if (ut_dulint_cmp(view->low_limit_no, trx->no) > 0) {
 
 				view->low_limit_no = trx->no;

innobase/trx/trx0trx.c

@@ -1617,20 +1617,21 @@ trx_print(
 		(ulong) ut_dulint_get_high(trx->id),
 		 (ulong) ut_dulint_get_low(trx->id));
 
-  	switch (trx->conc_state) {
+        switch (trx->conc_state) {
 		case TRX_NOT_STARTED:
 			fputs(", not started", f);
 			break;
 		case TRX_ACTIVE:
+		case TRX_PREPARED:
 			fprintf(f, ", ACTIVE %lu sec",
 				(ulong)difftime(time(NULL), trx->start_time));
-									break;
+                        break;
 		case TRX_COMMITTED_IN_MEMORY:
 			fputs(", COMMITTED IN MEMORY", f);
 			break;
 		default:
 			fprintf(f, " state %lu", (ulong) trx->conc_state);
-  	}
+        }
 
 #ifdef UNIV_LINUX
 	fprintf(f, ", process no %lu", trx->mysql_process_no);

myisam/ft_stopwords.c

@@ -125,4 +125,5 @@ void ft_free_stopwords()
     my_free((char*) stopwords3,MYF(0));
     stopwords3=0;
   }
+  ft_stopword_file= 0;
 }

mysql-test/Makefile.am

@@ -45,7 +45,8 @@ mysql_test_run_new_SOURCES=		mysql_test_run_new.c my_manage.c my_create_tables.c
 dist-hook:
 	mkdir -p $(distdir)/t $(distdir)/r $(distdir)/include \
 		$(distdir)/std_data
-	$(INSTALL_DATA) $(srcdir)/t/*.test $(srcdir)/t/*.opt $(srcdir)/t/*.sh $(srcdir)/t/*.slave-mi $(distdir)/t
+	$(INSTALL_DATA) $(srcdir)/t/*.test $(srcdir)/t/*.disabled $(distdir)/t
+	$(INSTALL_DATA) $(srcdir)/t/*.opt $(srcdir)/t/*.sh $(srcdir)/t/*.slave-mi $(distdir)/t
 	$(INSTALL_DATA) $(srcdir)/include/*.inc $(distdir)/include
 	$(INSTALL_DATA) $(srcdir)/r/*.result $(srcdir)/r/*.result.es $(srcdir)/r/*.require $(distdir)/r
 	$(INSTALL_DATA) $(srcdir)/std_data/Moscow_leap $(distdir)/std_data
@@ -62,10 +63,12 @@ install-data-local:
 		$(DESTDIR)$(testdir)/std_data
 	$(INSTALL_DATA) $(srcdir)/README $(DESTDIR)$(testdir)
 	$(INSTALL_DATA) $(srcdir)/t/*.test $(DESTDIR)$(testdir)/t
+	$(INSTALL_DATA) $(srcdir)/t/*.disabled $(DESTDIR)$(testdir)/t
 	$(INSTALL_DATA) $(srcdir)/t/*.opt $(DESTDIR)$(testdir)/t
 	$(INSTALL_DATA) $(srcdir)/t/*.sh $(DESTDIR)$(testdir)/t
 	$(INSTALL_DATA) $(srcdir)/t/*.slave-mi $(DESTDIR)$(testdir)/t
-	$(INSTALL_DATA) $(srcdir)/r/*.result $(srcdir)/r/*.result.es $(DESTDIR)$(testdir)/r
+	$(INSTALL_DATA) $(srcdir)/r/*.result $(DESTDIR)$(testdir)/r
+	$(INSTALL_DATA) $(srcdir)/r/*.result.es $(DESTDIR)$(testdir)/r
 	$(INSTALL_DATA) $(srcdir)/r/*.require $(DESTDIR)$(testdir)/r
 	$(INSTALL_DATA) $(srcdir)/include/*.inc $(DESTDIR)$(testdir)/include
 	$(INSTALL_DATA) $(srcdir)/std_data/*.dat $(DESTDIR)$(testdir)/std_data

mysql-test/mysql-test-run.sh

@@ -208,7 +208,6 @@ export UMASK UMASK_DIR
 MASTER_RUNNING=0
 MASTER1_RUNNING=0
 MASTER_MYPORT=9306
-MASTER_MYPORT1=9307
 SLAVE_RUNNING=0
 SLAVE_MYPORT=9308 # leave room for 2 masters for cluster tests
 MYSQL_MANAGER_PORT=9305 # needs to be out of the way of slaves
@@ -495,7 +494,7 @@ SLAVE_MYERR="$MYSQL_TEST_DIR/var/log/slave.err"
 CURRENT_TEST="$MYSQL_TEST_DIR/var/log/current_test"
 SMALL_SERVER="--key_buffer_size=1M --sort_buffer=256K --max_heap_table_size=1M"
 
-export MASTER_MYPORT MASTER_MYPORT1 SLAVE_MYPORT MYSQL_TCP_PORT MASTER_MYSOCK MASTER_MYSOCK1
+export MASTER_MYPORT SLAVE_MYPORT MYSQL_TCP_PORT MASTER_MYSOCK MASTER_MYSOCK1
 
 NDBCLUSTER_OPTS="--port=$NDBCLUSTER_PORT --data-dir=$MYSQL_TEST_DIR/var --ndb_mgm-extra-opts=$NDB_MGM_EXTRA_OPTS --ndb_mgmd-extra-opts=$NDB_MGMD_EXTRA_OPTS --ndbd-extra-opts=$NDBD_EXTRA_OPTS"
 NDB_BACKUP_DIR=$MYSQL_TEST_DIR/var/ndbcluster-$NDBCLUSTER_PORT
@@ -1144,6 +1143,8 @@ start_master()
    id=`$EXPR $1 + 101`;
    this_master_myport=`$EXPR $MASTER_MYPORT + $1`
    NOT_FIRST_MASTER_EXTRA_OPTS="--skip-innodb"
+   eval "MASTER_MYPORT$1=$this_master_myport"
+   export MASTER_MYPORT$1
   else
    id=1;
    this_master_myport=$MASTER_MYPORT
@@ -1762,7 +1763,7 @@ then
     $MYSQLADMIN --no-defaults --socket=$MASTER_MYSOCK1 -u root -O connect_timeout=5 -O shutdown_timeout=20 shutdown > /dev/null 2>&1
     $MYSQLADMIN --no-defaults --socket=$SLAVE_MYSOCK -u root -O connect_timeout=5 -O shutdown_timeout=20 shutdown > /dev/null 2>&1
     $MYSQLADMIN --no-defaults --host=$hostname --port=$MASTER_MYPORT -u root -O connect_timeout=5 -O shutdown_timeout=20 shutdown > /dev/null 2>&1
-    $MYSQLADMIN --no-defaults --host=$hostname --port=$MASTER_MYPORT1 -u root -O connect_timeout=5 -O shutdown_timeout=20 shutdown > /dev/null 2>&1
+    $MYSQLADMIN --no-defaults --host=$hostname --port=`expr $MASTER_MYPORT+1` -u root -O connect_timeout=5 -O shutdown_timeout=20 shutdown > /dev/null 2>&1
     $MYSQLADMIN --no-defaults --host=$hostname --port=$SLAVE_MYPORT -u root -O connect_timeout=5 -O shutdown_timeout=20 shutdown > /dev/null 2>&1
     $MYSQLADMIN --no-defaults --host=$hostname --port=`expr $SLAVE_MYPORT + 1` -u root -O connect_timeout=5 -O shutdown_timeout=20 shutdown > /dev/null 2>&1
     sleep_until_file_deleted 0 $MASTER_MYPID

mysql-test/r/ctype_latin1_de.result

@@ -326,3 +326,15 @@ latin1_german2_ci	6109
 latin1_german2_ci	61
 latin1_german2_ci	6120
 drop table t1;
+SET NAMES latin1;
+CREATE TABLE t1 (
+col1 varchar(255) NOT NULL default ''
+) ENGINE=MyISAM DEFAULT CHARSET=latin1 collate latin1_german2_ci;
+INSERT INTO t1 VALUES (''),('ss'),('ss');
+ALTER TABLE t1 ADD KEY ifword(col1);
+SELECT * FROM t1 WHERE col1='' ORDER BY col1, BINARY col1;
+col1
+ss
+ss
+
+DROP TABLE t1;

mysql-test/r/ctype_ucs.result

@@ -523,11 +523,12 @@ create table t2 (c char(30)) charset=ucs2;
 set @v=convert('abc' using ucs2);
 reset master;
 insert into t2 values (@v);
-show binlog events from 95;
+show binlog events from 96;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-master-bin.000001	95	User var	1	135	@`v`=_ucs2 0x006100620063 COLLATE ucs2_general_ci
-master-bin.000001	135	Query	1	225	use `test`; insert into t2 values (@v)
+master-bin.000001	96	User var	1	136	@`v`=_ucs2 0x006100620063 COLLATE ucs2_general_ci
+master-bin.000001	136	Query	1	226	use `test`; insert into t2 values (@v)
 /*!40019 SET @@session.max_insert_delayed_threads=0*/;
+ROLLBACK;
 SET @`v`:=_ucs2 0x006100620063 COLLATE `ucs2_general_ci`;
 use test;
 SET TIMESTAMP=10000;

mysql-test/r/func_group.result

@@ -90,6 +90,26 @@ id	avg(rating)
 1	3.0000
 2	NULL
 3	2.0000
+select sql_small_result t2.id, avg(rating) from t2 group by t2.id;
+id	avg(rating)
+1	3.0000
+2	NULL
+3	2.0000
+select sql_big_result t2.id, avg(rating) from t2 group by t2.id;
+id	avg(rating)
+1	3.0000
+2	NULL
+3	2.0000
+select sql_small_result t2.id, avg(rating+0.0e0) from t2 group by t2.id;
+id	avg(rating+0.0e0)
+1	3
+2	NULL
+3	2
+select sql_big_result t2.id, avg(rating+0.0e0) from t2 group by t2.id;
+id	avg(rating+0.0e0)
+1	3
+2	NULL
+3	2
 drop table t1,t2;
 create table t1 (a smallint(6) primary key, c char(10), b text);
 INSERT INTO t1 VALUES (1,'1','1');

mysql-test/r/func_set.result

@@ -30,6 +30,12 @@ Y-N-N-Y-N	Y,N,N,Y,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,
 select elt(2,1),field(NULL,"a","b","c");
 elt(2,1)	field(NULL,"a","b","c")
 NULL	0
+select field("b","a",NULL),field(1,0,NULL)+0,field(1.0,0.0,NULL)+0.0,field(1.0e1,0.0e1,NULL)+0.0e1;
+field("b","a",NULL)	field(1,0,NULL)+0	field(1.0,0.0,NULL)+0.0	field(1.0e1,0.0e1,NULL)+0.0e1
+0	0	0.0	0
+select field(NULL,"a",NULL),field(NULL,0,NULL)+0,field(NULL,0.0,NULL)+0.0,field(NULL,0.0e1,NULL)+0.0e1;
+field(NULL,"a",NULL)	field(NULL,0,NULL)+0	field(NULL,0.0,NULL)+0.0	field(NULL,0.0e1,NULL)+0.0e1
+0	0	0.0	0
 select find_in_set("","a,b,c"),find_in_set("","a,b,c,"),find_in_set("",",a,b,c");
 find_in_set("","a,b,c")	find_in_set("","a,b,c,")	find_in_set("",",a,b,c")
 0	4	1

mysql-test/r/innodb.result

@@ -271,7 +271,7 @@ n
 6
 7
 rollback to savepoint `my_savepoint`;
-ERROR HY000: Got error 153 during ROLLBACK
+ERROR 42000: SAVEPOINT my_savepoint does not exist
 set autocommit=1;
 rollback;
 drop table t1;
@@ -1633,14 +1633,14 @@ t2	CREATE TABLE `t2` (
 drop table t2, t1;
 show status like "binlog_cache_use";
 Variable_name	Value
-Binlog_cache_use	25
+Binlog_cache_use	152
 show status like "binlog_cache_disk_use";
 Variable_name	Value
 Binlog_cache_disk_use	0
 create table t1 (a int) engine=innodb;
 show status like "binlog_cache_use";
 Variable_name	Value
-Binlog_cache_use	26
+Binlog_cache_use	153
 show status like "binlog_cache_disk_use";
 Variable_name	Value
 Binlog_cache_disk_use	1
@@ -1649,7 +1649,7 @@ delete from t1;
 commit;
 show status like "binlog_cache_use";
 Variable_name	Value
-Binlog_cache_use	27
+Binlog_cache_use	154
 show status like "binlog_cache_disk_use";
 Variable_name	Value
 Binlog_cache_disk_use	1

mysql-test/r/insert_select.result

@@ -74,8 +74,8 @@ insert into t1 select * from t2;
 ERROR 23000: Duplicate entry '2' for key 1
 show binlog events;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-master-bin.000001	4	Format_desc	1	95	Server ver: VERSION, Binlog ver: 4
-master-bin.000001	95	Query	1	190	use `test`; insert into t1 select * from t2
+master-bin.000001	4	Format_desc	1	96	Server ver: VERSION, Binlog ver: 4
+master-bin.000001	96	Query	1	191	use `test`; insert into t1 select * from t2
 select * from t1;
 a
 1
@@ -88,7 +88,7 @@ create table t2(unique(a)) select a from t1;
 ERROR 23000: Duplicate entry '1' for key 1
 show binlog events;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-master-bin.000001	4	Format_desc	1	95	Server ver: VERSION, Binlog ver: 4
+master-bin.000001	4	Format_desc	1	96	Server ver: VERSION, Binlog ver: 4
 drop table t1;
 create table t1 (a int not null);
 create table t2 (a int not null);

mysql-test/r/mix_innodb_myisam_binlog.result

@@ -6,12 +6,12 @@ begin;
 insert into t1 values(1);
 insert into t2 select * from t1;
 commit;
-show binlog events from 95;
+show binlog events from 96;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-master-bin.000001	95	Query	1	#	use `test`; BEGIN
-master-bin.000001	164	Query	1	#	use `test`; insert into t1 values(1)
-master-bin.000001	252	Query	1	#	use `test`; insert into t2 select * from t1
-master-bin.000001	347	Query	1	#	use `test`; COMMIT
+master-bin.000001	96	Query	1	#	use `test`; BEGIN
+master-bin.000001	165	Query	1	#	use `test`; insert into t1 values(1)
+master-bin.000001	253	Query	1	#	use `test`; insert into t2 select * from t1
+master-bin.000001	348	Xid	1	#	COMMIT /* xid=7 */
 delete from t1;
 delete from t2;
 reset master;
@@ -21,12 +21,12 @@ insert into t2 select * from t1;
 rollback;
 Warnings:
 Warning	1196	Some non-transactional changed tables couldn't be rolled back
-show binlog events from 95;
+show binlog events from 96;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-master-bin.000001	95	Query	1	#	use `test`; BEGIN
-master-bin.000001	164	Query	1	#	use `test`; insert into t1 values(2)
-master-bin.000001	252	Query	1	#	use `test`; insert into t2 select * from t1
-master-bin.000001	347	Query	1	#	use `test`; ROLLBACK
+master-bin.000001	96	Query	1	#	use `test`; BEGIN
+master-bin.000001	165	Query	1	#	use `test`; insert into t1 values(2)
+master-bin.000001	253	Query	1	#	use `test`; insert into t2 select * from t1
+master-bin.000001	348	Query	1	#	use `test`; ROLLBACK
 delete from t1;
 delete from t2;
 reset master;
@@ -39,15 +39,15 @@ rollback to savepoint my_savepoint;
 Warnings:
 Warning	1196	Some non-transactional changed tables couldn't be rolled back
 commit;
-show binlog events from 95;
+show binlog events from 96;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-master-bin.000001	95	Query	1	#	use `test`; BEGIN
-master-bin.000001	164	Query	1	#	use `test`; insert into t1 values(3)
-master-bin.000001	252	Query	1	#	use `test`; savepoint my_savepoint
-master-bin.000001	338	Query	1	#	use `test`; insert into t1 values(4)
-master-bin.000001	426	Query	1	#	use `test`; insert into t2 select * from t1
-master-bin.000001	521	Query	1	#	use `test`; rollback to savepoint my_savepoint
-master-bin.000001	619	Query	1	#	use `test`; COMMIT
+master-bin.000001	96	Query	1	#	use `test`; BEGIN
+master-bin.000001	165	Query	1	#	use `test`; insert into t1 values(3)
+master-bin.000001	253	Query	1	#	use `test`; savepoint my_savepoint
+master-bin.000001	339	Query	1	#	use `test`; insert into t1 values(4)
+master-bin.000001	427	Query	1	#	use `test`; insert into t2 select * from t1
+master-bin.000001	522	Query	1	#	use `test`; rollback to savepoint my_savepoint
+master-bin.000001	620	Xid	1	#	COMMIT /* xid=24 */
 delete from t1;
 delete from t2;
 reset master;
@@ -65,16 +65,16 @@ select a from t1 order by a;
 a
 5
 7
-show binlog events from 95;
+show binlog events from 96;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-master-bin.000001	95	Query	1	#	use `test`; BEGIN
-master-bin.000001	164	Query	1	#	use `test`; insert into t1 values(5)
-master-bin.000001	252	Query	1	#	use `test`; savepoint my_savepoint
-master-bin.000001	338	Query	1	#	use `test`; insert into t1 values(6)
-master-bin.000001	426	Query	1	#	use `test`; insert into t2 select * from t1
-master-bin.000001	521	Query	1	#	use `test`; rollback to savepoint my_savepoint
-master-bin.000001	619	Query	1	#	use `test`; insert into t1 values(7)
-master-bin.000001	707	Query	1	#	use `test`; COMMIT
+master-bin.000001	96	Query	1	#	use `test`; BEGIN
+master-bin.000001	165	Query	1	#	use `test`; insert into t1 values(5)
+master-bin.000001	253	Query	1	#	use `test`; savepoint my_savepoint
+master-bin.000001	339	Query	1	#	use `test`; insert into t1 values(6)
+master-bin.000001	427	Query	1	#	use `test`; insert into t2 select * from t1
+master-bin.000001	522	Query	1	#	use `test`; rollback to savepoint my_savepoint
+master-bin.000001	620	Query	1	#	use `test`; insert into t1 values(7)
+master-bin.000001	708	Xid	1	#	COMMIT /* xid=36 */
 delete from t1;
 delete from t2;
 reset master;
@@ -87,40 +87,47 @@ insert into t2 select * from t1;
 select get_lock("a",10);
 get_lock("a",10)
 1
-show binlog events from 95;
+show binlog events from 96;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-master-bin.000001	95	Query	1	#	use `test`; BEGIN
-master-bin.000001	164	Query	1	#	use `test`; insert into t1 values(8)
-master-bin.000001	252	Query	1	#	use `test`; insert into t2 select * from t1
-master-bin.000001	347	Query	1	#	use `test`; ROLLBACK
+master-bin.000001	96	Query	1	#	use `test`; BEGIN
+master-bin.000001	165	Query	1	#	use `test`; insert into t1 values(8)
+master-bin.000001	253	Query	1	#	use `test`; insert into t2 select * from t1
+master-bin.000001	348	Query	1	#	use `test`; ROLLBACK
+master-bin.000001	420	Query	1	#	use `test`; DO RELEASE_LOCK("a")
 delete from t1;
 delete from t2;
 reset master;
 insert into t1 values(9);
 insert into t2 select * from t1;
-show binlog events from 95;
+show binlog events from 96;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-master-bin.000001	95	Query	1	#	use `test`; insert into t1 values(9)
-master-bin.000001	183	Query	1	#	use `test`; insert into t2 select * from t1
+master-bin.000001	96	Query	1	#	use `test`; BEGIN
+master-bin.000001	165	Query	1	#	use `test`; insert into t1 values(9)
+master-bin.000001	253	Xid	1	#	COMMIT /* xid=59 */
+master-bin.000001	280	Query	1	#	use `test`; insert into t2 select * from t1
 delete from t1;
 delete from t2;
 reset master;
 insert into t1 values(10);
 begin;
 insert into t2 select * from t1;
-show binlog events from 95;
+show binlog events from 96;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-master-bin.000001	95	Query	1	#	use `test`; insert into t1 values(10)
-master-bin.000001	184	Query	1	#	use `test`; insert into t2 select * from t1
+master-bin.000001	96	Query	1	#	use `test`; BEGIN
+master-bin.000001	165	Query	1	#	use `test`; insert into t1 values(10)
+master-bin.000001	254	Xid	1	#	COMMIT /* xid=65 */
+master-bin.000001	281	Query	1	#	use `test`; insert into t2 select * from t1
 insert into t1 values(11);
 commit;
-show binlog events from 95;
+show binlog events from 96;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-master-bin.000001	95	Query	1	#	use `test`; insert into t1 values(10)
-master-bin.000001	184	Query	1	#	use `test`; insert into t2 select * from t1
-master-bin.000001	279	Query	1	#	use `test`; BEGIN
-master-bin.000001	348	Query	1	#	use `test`; insert into t1 values(11)
-master-bin.000001	437	Query	1	#	use `test`; COMMIT
+master-bin.000001	96	Query	1	#	use `test`; BEGIN
+master-bin.000001	165	Query	1	#	use `test`; insert into t1 values(10)
+master-bin.000001	254	Xid	1	#	COMMIT /* xid=65 */
+master-bin.000001	281	Query	1	#	use `test`; insert into t2 select * from t1
+master-bin.000001	376	Query	1	#	use `test`; BEGIN
+master-bin.000001	445	Query	1	#	use `test`; insert into t1 values(11)
+master-bin.000001	534	Xid	1	#	COMMIT /* xid=67 */
 alter table t2 engine=INNODB;
 delete from t1;
 delete from t2;
@@ -129,12 +136,12 @@ begin;
 insert into t1 values(12);
 insert into t2 select * from t1;
 commit;
-show binlog events from 95;
+show binlog events from 96;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-master-bin.000001	95	Query	1	#	use `test`; BEGIN
-master-bin.000001	164	Query	1	#	use `test`; insert into t1 values(12)
-master-bin.000001	253	Query	1	#	use `test`; insert into t2 select * from t1
-master-bin.000001	348	Query	1	#	use `test`; COMMIT
+master-bin.000001	96	Query	1	#	use `test`; BEGIN
+master-bin.000001	165	Query	1	#	use `test`; insert into t1 values(12)
+master-bin.000001	254	Query	1	#	use `test`; insert into t2 select * from t1
+master-bin.000001	349	Xid	1	#	COMMIT /* xid=77 */
 delete from t1;
 delete from t2;
 reset master;
@@ -142,7 +149,7 @@ begin;
 insert into t1 values(13);
 insert into t2 select * from t1;
 rollback;
-show binlog events from 95;
+show binlog events from 96;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 delete from t1;
 delete from t2;
@@ -154,11 +161,11 @@ insert into t1 values(15);
 insert into t2 select * from t1;
 rollback to savepoint my_savepoint;
 commit;
-show binlog events from 95;
+show binlog events from 96;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-master-bin.000001	95	Query	1	#	use `test`; BEGIN
-master-bin.000001	164	Query	1	#	use `test`; insert into t1 values(14)
-master-bin.000001	253	Query	1	#	use `test`; COMMIT
+master-bin.000001	96	Query	1	#	use `test`; BEGIN
+master-bin.000001	165	Query	1	#	use `test`; insert into t1 values(14)
+master-bin.000001	254	Xid	1	#	COMMIT /* xid=93 */
 delete from t1;
 delete from t2;
 reset master;
@@ -174,12 +181,12 @@ select a from t1 order by a;
 a
 16
 18
-show binlog events from 95;
+show binlog events from 96;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-master-bin.000001	95	Query	1	#	use `test`; BEGIN
-master-bin.000001	164	Query	1	#	use `test`; insert into t1 values(16)
-master-bin.000001	253	Query	1	#	use `test`; insert into t1 values(18)
-master-bin.000001	342	Query	1	#	use `test`; COMMIT
+master-bin.000001	96	Query	1	#	use `test`; BEGIN
+master-bin.000001	165	Query	1	#	use `test`; insert into t1 values(16)
+master-bin.000001	254	Query	1	#	use `test`; insert into t1 values(18)
+master-bin.000001	343	Xid	1	#	COMMIT /* xid=104 */
 delete from t1;
 delete from t2;
 alter table t2 type=MyISAM;

mysql-test/r/mysqlbinlog.result

@@ -15,6 +15,7 @@ flush logs;
 
 --- Local --
 /*!40019 SET @@session.max_insert_delayed_threads=0*/;
+ROLLBACK;
 use test;
 SET TIMESTAMP=1000000000;
 SET @@session.foreign_key_checks=1, @@session.sql_auto_is_null=1, @@session.unique_checks=1;
@@ -47,6 +48,7 @@ insert into t1 values ("Alas");
 
 --- --database --
 /*!40019 SET @@session.max_insert_delayed_threads=0*/;
+ROLLBACK;
 SET INSERT_ID=1;
 
 --- --position --
@@ -60,6 +62,7 @@ insert into t1 values ("Alas");
 
 --- Remote --
 /*!40019 SET @@session.max_insert_delayed_threads=0*/;
+ROLLBACK;
 use test;
 SET TIMESTAMP=1000000000;
 SET @@session.foreign_key_checks=1, @@session.sql_auto_is_null=1, @@session.unique_checks=1;
@@ -92,6 +95,7 @@ insert into t1 values ("Alas");
 
 --- --database --
 /*!40019 SET @@session.max_insert_delayed_threads=0*/;
+ROLLBACK;
 SET INSERT_ID=1;
 
 --- --position --
@@ -105,11 +109,16 @@ insert into t1 values ("Alas");
 
 --- reading stdin --
 /*!40019 SET @@session.max_insert_delayed_threads=0*/;
+ROLLBACK;
 use test;
-SET TIMESTAMP=1065204671;
+SET TIMESTAMP=1108844556;
 BEGIN;
+SET TIMESTAMP=1108844555;
+insert t1 values (1);
 /*!40019 SET @@session.max_insert_delayed_threads=0*/;
 use test;
-SET TIMESTAMP=1065204671;
+SET TIMESTAMP=1108844556;
 BEGIN;
+SET TIMESTAMP=1108844555;
+insert t1 values (1);
 drop table t1, t2;

mysql-test/r/mysqlbinlog2.result

@@ -16,6 +16,7 @@ insert into t1 values(null, "f");
 
 --- Local --
 /*!40019 SET @@session.max_insert_delayed_threads=0*/;
+ROLLBACK;
 use test;
 SET TIMESTAMP=1579609942;
 SET @@session.foreign_key_checks=1, @@session.sql_auto_is_null=1, @@session.unique_checks=1;
@@ -40,6 +41,7 @@ insert into t1 values(null, "e");
 
 --- offset --
 /*!40019 SET @@session.max_insert_delayed_threads=0*/;
+ROLLBACK;
 SET INSERT_ID=1;
 use test;
 SET TIMESTAMP=1579609942;
@@ -75,6 +77,7 @@ insert into t1 values(null, "e");
 
 --- stop-position --
 /*!40019 SET @@session.max_insert_delayed_threads=0*/;
+ROLLBACK;
 use test;
 SET TIMESTAMP=1579609942;
 SET @@session.foreign_key_checks=1, @@session.sql_auto_is_null=1, @@session.unique_checks=1;
@@ -93,6 +96,7 @@ insert into t1 values(null, "c");
 
 --- start-datetime --
 /*!40019 SET @@session.max_insert_delayed_threads=0*/;
+ROLLBACK;
 SET INSERT_ID=3;
 use test;
 SET TIMESTAMP=1579609944;
@@ -109,6 +113,7 @@ insert into t1 values(null, "e");
 
 --- stop-datetime --
 /*!40019 SET @@session.max_insert_delayed_threads=0*/;
+ROLLBACK;
 use test;
 SET TIMESTAMP=1579609942;
 SET @@session.foreign_key_checks=1, @@session.sql_auto_is_null=1, @@session.unique_checks=1;
@@ -124,6 +129,7 @@ insert into t1 values(null, "b");
 
 --- Local with 2 binlogs on command line --
 /*!40019 SET @@session.max_insert_delayed_threads=0*/;
+ROLLBACK;
 use test;
 SET TIMESTAMP=1579609942;
 SET @@session.foreign_key_checks=1, @@session.sql_auto_is_null=1, @@session.unique_checks=1;
@@ -155,6 +161,7 @@ insert into t1 values(null, "f");
 
 --- offset --
 /*!40019 SET @@session.max_insert_delayed_threads=0*/;
+ROLLBACK;
 SET INSERT_ID=1;
 use test;
 SET TIMESTAMP=1579609942;
@@ -204,6 +211,7 @@ insert into t1 values(null, "f");
 
 --- stop-position --
 /*!40019 SET @@session.max_insert_delayed_threads=0*/;
+ROLLBACK;
 use test;
 SET TIMESTAMP=1579609942;
 SET @@session.foreign_key_checks=1, @@session.sql_auto_is_null=1, @@session.unique_checks=1;
@@ -229,6 +237,7 @@ SET INSERT_ID=6;
 
 --- start-datetime --
 /*!40019 SET @@session.max_insert_delayed_threads=0*/;
+ROLLBACK;
 SET INSERT_ID=3;
 use test;
 SET TIMESTAMP=1579609944;
@@ -252,6 +261,7 @@ insert into t1 values(null, "f");
 
 --- stop-datetime --
 /*!40019 SET @@session.max_insert_delayed_threads=0*/;
+ROLLBACK;
 use test;
 SET TIMESTAMP=1579609942;
 SET @@session.foreign_key_checks=1, @@session.sql_auto_is_null=1, @@session.unique_checks=1;
@@ -267,6 +277,7 @@ insert into t1 values(null, "b");
 
 --- Remote --
 /*!40019 SET @@session.max_insert_delayed_threads=0*/;
+ROLLBACK;
 use test;
 SET TIMESTAMP=1579609942;
 SET @@session.foreign_key_checks=1, @@session.sql_auto_is_null=1, @@session.unique_checks=1;
@@ -291,6 +302,7 @@ insert into t1 values(null, "e");
 
 --- offset --
 /*!40019 SET @@session.max_insert_delayed_threads=0*/;
+ROLLBACK;
 SET INSERT_ID=1;
 use test;
 SET TIMESTAMP=1579609942;
@@ -326,6 +338,7 @@ insert into t1 values(null, "e");
 
 --- stop-position --
 /*!40019 SET @@session.max_insert_delayed_threads=0*/;
+ROLLBACK;
 use test;
 SET TIMESTAMP=1579609942;
 SET @@session.foreign_key_checks=1, @@session.sql_auto_is_null=1, @@session.unique_checks=1;
@@ -344,6 +357,7 @@ insert into t1 values(null, "c");
 
 --- start-datetime --
 /*!40019 SET @@session.max_insert_delayed_threads=0*/;
+ROLLBACK;
 SET INSERT_ID=3;
 use test;
 SET TIMESTAMP=1579609944;
@@ -360,6 +374,7 @@ insert into t1 values(null, "e");
 
 --- stop-datetime --
 /*!40019 SET @@session.max_insert_delayed_threads=0*/;
+ROLLBACK;
 use test;
 SET TIMESTAMP=1579609942;
 SET @@session.foreign_key_checks=1, @@session.sql_auto_is_null=1, @@session.unique_checks=1;
@@ -375,6 +390,7 @@ insert into t1 values(null, "b");
 
 --- Remote with 2 binlogs on command line --
 /*!40019 SET @@session.max_insert_delayed_threads=0*/;
+ROLLBACK;
 use test;
 SET TIMESTAMP=1579609942;
 SET @@session.foreign_key_checks=1, @@session.sql_auto_is_null=1, @@session.unique_checks=1;
@@ -406,6 +422,7 @@ insert into t1 values(null, "f");
 
 --- offset --
 /*!40019 SET @@session.max_insert_delayed_threads=0*/;
+ROLLBACK;
 SET INSERT_ID=1;
 use test;
 SET TIMESTAMP=1579609942;
@@ -455,6 +472,7 @@ insert into t1 values(null, "f");
 
 --- stop-position --
 /*!40019 SET @@session.max_insert_delayed_threads=0*/;
+ROLLBACK;
 use test;
 SET TIMESTAMP=1579609942;
 SET @@session.foreign_key_checks=1, @@session.sql_auto_is_null=1, @@session.unique_checks=1;
@@ -480,6 +498,7 @@ SET INSERT_ID=6;
 
 --- start-datetime --
 /*!40019 SET @@session.max_insert_delayed_threads=0*/;
+ROLLBACK;
 SET INSERT_ID=3;
 use test;
 SET TIMESTAMP=1579609944;
@@ -503,6 +522,7 @@ insert into t1 values(null, "f");
 
 --- stop-datetime --
 /*!40019 SET @@session.max_insert_delayed_threads=0*/;
+ROLLBACK;
 use test;
 SET TIMESTAMP=1579609942;
 SET @@session.foreign_key_checks=1, @@session.sql_auto_is_null=1, @@session.unique_checks=1;
@@ -518,6 +538,7 @@ insert into t1 values(null, "b");
 
 --- to-last-log --
 /*!40019 SET @@session.max_insert_delayed_threads=0*/;
+ROLLBACK;
 use test;
 SET TIMESTAMP=1579609942;
 SET @@session.foreign_key_checks=1, @@session.sql_auto_is_null=1, @@session.unique_checks=1;

mysql-test/r/ndb_autodiscover.result

@@ -167,8 +167,25 @@ show status like 'handler_discover%';
 Variable_name	Value
 Handler_discover	0
 drop table t4;
+ERROR 42S02: Unknown table 't4'
+create table t4(
+id int not null primary key,
+name char(27)
+) engine=ndb;
+insert into t4 values (1, "Automatic");
+select * from t4;
+id	name
+1	Automatic
+select * from t4;
+ERROR 42S02: Table 'test.t4' doesn't exist
+drop table if exists t4;
+Warnings:
+Note	1051	Unknown table 't4'
+drop table t5;
+ERROR 42S02: Unknown table 't5'
+drop table if exists t5;
 Warnings:
-Error	1296	Got error 709 'No such table existed' from NDB
+Note	1051	Unknown table 't5'
 flush status;
 create table t4(
 id int not null primary key,

mysql-test/r/ndb_cache2.result

 drop table if exists t1;
 set GLOBAL query_cache_type=on;
 set GLOBAL query_cache_size=1355776;
-set GLOBAL ndb_cache_check_time=5;
+set GLOBAL ndb_cache_check_time=1;
 reset query cache;
 flush status;
 CREATE TABLE t1 ( pk int not null primary key,

mysql-test/r/ndb_cache_multi2.result

@@ -72,3 +72,11 @@ show status like "Qcache_hits";
 Variable_name	Value
 Qcache_hits	0
 drop table t1, t2;
+set GLOBAL query_cache_size=0;
+set GLOBAL ndb_cache_check_time=0;
+reset query cache;
+flush status;
+set GLOBAL query_cache_size=0;
+set GLOBAL ndb_cache_check_time=0;
+reset query cache;
+flush status;

mysql-test/r/rpl000015.result

 reset master;
 show master status;
 File	Position	Binlog_Do_DB	Binlog_Ignore_DB
-master-bin.000001	95		
+master-bin.000001	96		
 reset slave;
 show slave status;
 Slave_IO_State	Master_Host	Master_User	Master_Port	Connect_Retry	Master_Log_File	Read_Master_Log_Pos	Relay_Log_File	Relay_Log_Pos	Relay_Master_Log_File	Slave_IO_Running	Slave_SQL_Running	Replicate_Do_DB	Replicate_Ignore_DB	Replicate_Do_Table	Replicate_Ignore_Table	Replicate_Wild_Do_Table	Replicate_Wild_Ignore_Table	Last_Errno	Last_Error	Skip_Counter	Exec_Master_Log_Pos	Relay_Log_Space	Until_Condition	Until_Log_File	Until_Log_Pos	Master_SSL_Allowed	Master_SSL_CA_File	Master_SSL_CA_Path	Master_SSL_Cert	Master_SSL_Cipher	Master_SSL_Key	Seconds_Behind_Master
@@ -17,7 +17,7 @@ Slave_IO_State	Master_Host	Master_User	Master_Port	Connect_Retry	Master_Log_File
 start slave;
 show slave status;
 Slave_IO_State	Master_Host	Master_User	Master_Port	Connect_Retry	Master_Log_File	Read_Master_Log_Pos	Relay_Log_File	Relay_Log_Pos	Relay_Master_Log_File	Slave_IO_Running	Slave_SQL_Running	Replicate_Do_DB	Replicate_Ignore_DB	Replicate_Do_Table	Replicate_Ignore_Table	Replicate_Wild_Do_Table	Replicate_Wild_Ignore_Table	Last_Errno	Last_Error	Skip_Counter	Exec_Master_Log_Pos	Relay_Log_Space	Until_Condition	Until_Log_File	Until_Log_Pos	Master_SSL_Allowed	Master_SSL_CA_File	Master_SSL_CA_Path	Master_SSL_Cert	Master_SSL_Cipher	Master_SSL_Key	Seconds_Behind_Master
-#	127.0.0.1	root	MASTER_PORT	7	master-bin.000001	95	#	#	master-bin.000001	Yes	Yes							0		0	95	#	None		0	No						#
+#	127.0.0.1	root	MASTER_PORT	7	master-bin.000001	96	#	#	master-bin.000001	Yes	Yes							0		0	96	#	None		0	No						#
 drop table if exists t1;
 create table t1 (n int);
 insert into t1 values (10),(45),(90);

mysql-test/r/rpl_change_master.result

@@ -16,11 +16,11 @@ n
 1
 show slave status;
 Slave_IO_State	Master_Host	Master_User	Master_Port	Connect_Retry	Master_Log_File	Read_Master_Log_Pos	Relay_Log_File	Relay_Log_Pos	Relay_Master_Log_File	Slave_IO_Running	Slave_SQL_Running	Replicate_Do_DB	Replicate_Ignore_DB	Replicate_Do_Table	Replicate_Ignore_Table	Replicate_Wild_Do_Table	Replicate_Wild_Ignore_Table	Last_Errno	Last_Error	Skip_Counter	Exec_Master_Log_Pos	Relay_Log_Space	Until_Condition	Until_Log_File	Until_Log_Pos	Master_SSL_Allowed	Master_SSL_CA_File	Master_SSL_CA_Path	Master_SSL_Cert	Master_SSL_Cipher	Master_SSL_Key	Seconds_Behind_Master
-#	127.0.0.1	root	MASTER_MYPORT	1	master-bin.000001	376	#	#	master-bin.000001	No	No							0		0	288	#	None		0	No						#
+#	127.0.0.1	root	MASTER_MYPORT	1	master-bin.000001	377	#	#	master-bin.000001	No	No							0		0	289	#	None		0	No						#
 change master to master_user='root';
 show slave status;
 Slave_IO_State	Master_Host	Master_User	Master_Port	Connect_Retry	Master_Log_File	Read_Master_Log_Pos	Relay_Log_File	Relay_Log_Pos	Relay_Master_Log_File	Slave_IO_Running	Slave_SQL_Running	Replicate_Do_DB	Replicate_Ignore_DB	Replicate_Do_Table	Replicate_Ignore_Table	Replicate_Wild_Do_Table	Replicate_Wild_Ignore_Table	Last_Errno	Last_Error	Skip_Counter	Exec_Master_Log_Pos	Relay_Log_Space	Until_Condition	Until_Log_File	Until_Log_Pos	Master_SSL_Allowed	Master_SSL_CA_File	Master_SSL_CA_Path	Master_SSL_Cert	Master_SSL_Cipher	Master_SSL_Key	Seconds_Behind_Master
-#	127.0.0.1	root	MASTER_MYPORT	1	master-bin.000001	288	#	#	master-bin.000001	No	No							0		0	288	#	None		0	No						#
+#	127.0.0.1	root	MASTER_MYPORT	1	master-bin.000001	289	#	#	master-bin.000001	No	No							0		0	289	#	None		0	No						#
 select release_lock("a");
 release_lock("a")
 1

mysql-test/r/rpl_charset.result

@@ -103,7 +103,7 @@ a	b
 1	cp850_general_ci
 drop database mysqltest2;
 drop database mysqltest3;
-show binlog events from 95;
+show binlog events from 96;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	1	#	drop database if exists mysqltest2
 master-bin.000001	#	Query	1	#	drop database if exists mysqltest3
@@ -175,6 +175,7 @@ select hex(c1), hex(c2) from t1;
 hex(c1)	hex(c2)
 CDF32C20E7E020F0FBE1E0EBEAF3	CDF32C20E7E020F0FBE1E0EBEAF3
 /*!40019 SET @@session.max_insert_delayed_threads=0*/;
+ROLLBACK;
 SET TIMESTAMP=1000000000;
 SET @@session.foreign_key_checks=1, @@session.sql_auto_is_null=1, @@session.unique_checks=1;
 SET @@session.sql_mode=0;

mysql-test/r/rpl_error_ignored_table.result

@@ -9,7 +9,7 @@ insert into t1 values (1),(1);
 ERROR 23000: Duplicate entry '1' for key 1
 show slave status;
 Slave_IO_State	Master_Host	Master_User	Master_Port	Connect_Retry	Master_Log_File	Read_Master_Log_Pos	Relay_Log_File	Relay_Log_Pos	Relay_Master_Log_File	Slave_IO_Running	Slave_SQL_Running	Replicate_Do_DB	Replicate_Ignore_DB	Replicate_Do_Table	Replicate_Ignore_Table	Replicate_Wild_Do_Table	Replicate_Wild_Ignore_Table	Last_Errno	Last_Error	Skip_Counter	Exec_Master_Log_Pos	Relay_Log_Space	Until_Condition	Until_Log_File	Until_Log_Pos	Master_SSL_Allowed	Master_SSL_CA_File	Master_SSL_CA_Path	Master_SSL_Cert	Master_SSL_Cipher	Master_SSL_Key	Seconds_Behind_Master
-#	127.0.0.1	root	MASTER_PORT	1	master-bin.000001	287	#	#	master-bin.000001	Yes	Yes				test.t3,test.t1,test.t2			0		0	287	#	None		0	No						#
+#	127.0.0.1	root	MASTER_PORT	1	master-bin.000001	288	#	#	master-bin.000001	Yes	Yes				test.t3,test.t1,test.t2			0		0	288	#	None		0	No						#
 show tables like 't1';
 Tables_in_test (t1)
 drop table t1;
@@ -26,14 +26,14 @@ select (@id := id) - id from t3;
 0
 kill @id;
 drop table t2,t3;
-show binlog events from 95;
+show binlog events from 96;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-master-bin.000001	95	Query	1	194	use `test`; create table t1 (a int primary key)
-master-bin.000001	194	Query	1	287	use `test`; insert into t1 values (1),(1)
-master-bin.000001	287	Query	1	364	use `test`; drop table t1
-master-bin.000001	364	Query	1	463	use `test`; create table t2 (a int primary key)
-master-bin.000001	463	Query	1	551	use `test`; insert into t2 values(1)
-master-bin.000001	551	Query	1	639	use `test`; create table t3 (id int)
-master-bin.000001	639	Query	1	741	use `test`; insert into t3 values(connection_id())
-master-bin.000001	741	Query	1	861	use `test`; update t2 set a = a + 1 + get_lock('crash_lock%20C', 10)
-master-bin.000001	861	Query	1	941	use `test`; drop table t2,t3
+master-bin.000001	96	Query	1	195	use `test`; create table t1 (a int primary key)
+master-bin.000001	195	Query	1	288	use `test`; insert into t1 values (1),(1)
+master-bin.000001	288	Query	1	365	use `test`; drop table t1
+master-bin.000001	365	Query	1	464	use `test`; create table t2 (a int primary key)
+master-bin.000001	464	Query	1	552	use `test`; insert into t2 values(1)
+master-bin.000001	552	Query	1	640	use `test`; create table t3 (id int)
+master-bin.000001	640	Query	1	742	use `test`; insert into t3 values(connection_id())
+master-bin.000001	742	Query	1	862	use `test`; update t2 set a = a + 1 + get_lock('crash_lock%20C', 10)
+master-bin.000001	862	Query	1	942	use `test`; drop table t2,t3

mysql-test/r/rpl_flush_log_loop.result

@@ -14,4 +14,4 @@ start slave;
 flush logs;
 show slave status;
 Slave_IO_State	Master_Host	Master_User	Master_Port	Connect_Retry	Master_Log_File	Read_Master_Log_Pos	Relay_Log_File	Relay_Log_Pos	Relay_Master_Log_File	Slave_IO_Running	Slave_SQL_Running	Replicate_Do_DB	Replicate_Ignore_DB	Replicate_Do_Table	Replicate_Ignore_Table	Replicate_Wild_Do_Table	Replicate_Wild_Ignore_Table	Last_Errno	Last_Error	Skip_Counter	Exec_Master_Log_Pos	Relay_Log_Space	Until_Condition	Until_Log_File	Until_Log_Pos	Master_SSL_Allowed	Master_SSL_CA_File	Master_SSL_CA_Path	Master_SSL_Cert	Master_SSL_Cipher	Master_SSL_Key	Seconds_Behind_Master
-#	127.0.0.1	root	SLAVE_PORT	60	slave-bin.000001	206	#	#	slave-bin.000001	Yes	Yes							0		0	206	#	None		0	No						#
+#	127.0.0.1	root	SLAVE_PORT	60	slave-bin.000001	207	#	#	slave-bin.000001	Yes	Yes							0		0	207	#	None		0	No						#

mysql-test/r/rpl_flush_tables.result

@@ -14,27 +14,27 @@ rename table t1 to t5, t2 to t1;
 flush no_write_to_binlog tables;
 show binlog events;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-master-bin.000001	4	Format_desc	1	95	Server ver: SERVER_VERSION, Binlog ver: 4
-master-bin.000001	95	Query	1	182	use `test`; create table t1 (a int)
-master-bin.000001	182	Query	1	272	use `test`; insert into t1 values (10)
-master-bin.000001	272	Query	1	359	use `test`; create table t2 (a int)
-master-bin.000001	359	Query	1	469	use `test`; create table t3 (a int) engine=merge union(t1)
-master-bin.000001	469	Query	1	556	use `test`; create table t4 (a int)
-master-bin.000001	556	Query	1	651	use `test`; insert into t4 select * from t3
-master-bin.000001	651	Query	1	746	use `test`; rename table t1 to t5, t2 to t1
+master-bin.000001	4	Format_desc	1	96	Server ver: SERVER_VERSION, Binlog ver: 4
+master-bin.000001	96	Query	1	183	use `test`; create table t1 (a int)
+master-bin.000001	183	Query	1	273	use `test`; insert into t1 values (10)
+master-bin.000001	273	Query	1	360	use `test`; create table t2 (a int)
+master-bin.000001	360	Query	1	470	use `test`; create table t3 (a int) engine=merge union(t1)
+master-bin.000001	470	Query	1	557	use `test`; create table t4 (a int)
+master-bin.000001	557	Query	1	652	use `test`; insert into t4 select * from t3
+master-bin.000001	652	Query	1	747	use `test`; rename table t1 to t5, t2 to t1
 select * from t3;
 a
 flush tables;
 show binlog events;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-master-bin.000001	4	Format_desc	1	95	Server ver: SERVER_VERSION, Binlog ver: 4
-master-bin.000001	95	Query	1	182	use `test`; create table t1 (a int)
-master-bin.000001	182	Query	1	272	use `test`; insert into t1 values (10)
-master-bin.000001	272	Query	1	359	use `test`; create table t2 (a int)
-master-bin.000001	359	Query	1	469	use `test`; create table t3 (a int) engine=merge union(t1)
-master-bin.000001	469	Query	1	556	use `test`; create table t4 (a int)
-master-bin.000001	556	Query	1	651	use `test`; insert into t4 select * from t3
-master-bin.000001	651	Query	1	746	use `test`; rename table t1 to t5, t2 to t1
-master-bin.000001	746	Query	1	822	use `test`; flush tables
+master-bin.000001	4	Format_desc	1	96	Server ver: SERVER_VERSION, Binlog ver: 4
+master-bin.000001	96	Query	1	183	use `test`; create table t1 (a int)
+master-bin.000001	183	Query	1	273	use `test`; insert into t1 values (10)
+master-bin.000001	273	Query	1	360	use `test`; create table t2 (a int)
+master-bin.000001	360	Query	1	470	use `test`; create table t3 (a int) engine=merge union(t1)
+master-bin.000001	470	Query	1	557	use `test`; create table t4 (a int)
+master-bin.000001	557	Query	1	652	use `test`; insert into t4 select * from t3
+master-bin.000001	652	Query	1	747	use `test`; rename table t1 to t5, t2 to t1
+master-bin.000001	747	Query	1	823	use `test`; flush tables
 select * from t3;
 a

mysql-test/r/rpl_loaddata.result

@@ -22,7 +22,7 @@ day	id	category	name
 2003-03-22	2416	a	bbbbb
 show master status;
 File	Position	Binlog_Do_DB	Binlog_Ignore_DB
-slave-bin.000001	1096		
+slave-bin.000001	1097		
 drop table t1;
 drop table t2;
 drop table t3;
@@ -33,7 +33,7 @@ set global sql_slave_skip_counter=1;
 start slave;
 show slave status;
 Slave_IO_State	Master_Host	Master_User	Master_Port	Connect_Retry	Master_Log_File	Read_Master_Log_Pos	Relay_Log_File	Relay_Log_Pos	Relay_Master_Log_File	Slave_IO_Running	Slave_SQL_Running	Replicate_Do_DB	Replicate_Ignore_DB	Replicate_Do_Table	Replicate_Ignore_Table	Replicate_Wild_Do_Table	Replicate_Wild_Ignore_Table	Last_Errno	Last_Error	Skip_Counter	Exec_Master_Log_Pos	Relay_Log_Space	Until_Condition	Until_Log_File	Until_Log_Pos	Master_SSL_Allowed	Master_SSL_CA_File	Master_SSL_CA_Path	Master_SSL_Cert	Master_SSL_Cipher	Master_SSL_Key	Seconds_Behind_Master
-#	127.0.0.1	root	MASTER_PORT	1	master-bin.000001	1559	#	#	master-bin.000001	Yes	Yes							0		0	1559	#	None		0	No						#
+#	127.0.0.1	root	MASTER_PORT	1	master-bin.000001	1560	#	#	master-bin.000001	Yes	Yes							0		0	1560	#	None		0	No						#
 set sql_log_bin=0;
 delete from t1;
 set sql_log_bin=1;
@@ -43,7 +43,7 @@ change master to master_user='test';
 change master to master_user='root';
 show slave status;
 Slave_IO_State	Master_Host	Master_User	Master_Port	Connect_Retry	Master_Log_File	Read_Master_Log_Pos	Relay_Log_File	Relay_Log_Pos	Relay_Master_Log_File	Slave_IO_Running	Slave_SQL_Running	Replicate_Do_DB	Replicate_Ignore_DB	Replicate_Do_Table	Replicate_Ignore_Table	Replicate_Wild_Do_Table	Replicate_Wild_Ignore_Table	Last_Errno	Last_Error	Skip_Counter	Exec_Master_Log_Pos	Relay_Log_Space	Until_Condition	Until_Log_File	Until_Log_Pos	Master_SSL_Allowed	Master_SSL_CA_File	Master_SSL_CA_Path	Master_SSL_Cert	Master_SSL_Cipher	Master_SSL_Key	Seconds_Behind_Master
-#	127.0.0.1	root	MASTER_PORT	1	master-bin.000001	1667	#	#	master-bin.000001	No	No							0		0	1667	#	None		0	No						#
+#	127.0.0.1	root	MASTER_PORT	1	master-bin.000001	1668	#	#	master-bin.000001	No	No							0		0	1668	#	None		0	No						#
 set global sql_slave_skip_counter=1;
 start slave;
 set sql_log_bin=0;
@@ -64,5 +64,5 @@ terminated by ',' optionally enclosed by '%' escaped by '@' lines terminated by
 ERROR 23000: Duplicate entry '2003-03-22' for key 1
 show master status;
 File	Position	Binlog_Do_DB	Binlog_Ignore_DB
-master-bin.000001	536		
+master-bin.000001	537		
 drop table t2;

mysql-test/r/rpl_loaddata_rule_m.result

@@ -10,8 +10,8 @@ create database mysqltest;
 create table t1(a int, b int, unique(b));
 use mysqltest;
 load data infile '../../std_data/rpl_loaddata.dat' into table test.t1;
-show binlog events from 95;
+show binlog events from 96;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-master-bin.000001	95	Query	1	197	drop database if exists mysqltest
-master-bin.000001	197	Query	1	291	create database mysqltest
+master-bin.000001	96	Query	1	198	drop database if exists mysqltest
+master-bin.000001	198	Query	1	292	create database mysqltest
 drop database mysqltest;

mysql-test/r/rpl_loaddata_rule_s.result

@@ -10,5 +10,5 @@ load data infile '../../std_data/rpl_loaddata.dat' into table test.t1;
 select count(*) from t1;
 count(*)
 2
-show binlog events from 95;
+show binlog events from 96;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info

mysql-test/r/rpl_log.result

@@ -19,25 +19,25 @@ count(*)
 drop table t1;
 show binlog events;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-master-bin.000001	4	Format_desc	1	95	Server ver: VERSION, Binlog ver: 4
-master-bin.000001	95	Query	1	217	use `test`; create table t1(n int not null auto_increment primary key)
-master-bin.000001	217	Intvar	1	245	INSERT_ID=1
-master-bin.000001	245	Query	1	337	use `test`; insert into t1 values (NULL)
-master-bin.000001	337	Query	1	414	use `test`; drop table t1
-master-bin.000001	414	Query	1	518	use `test`; create table t1 (word char(20) not null)
-master-bin.000001	518	Create_file	1	1188	db=test;table=t1;file_id=1;block_len=581
-master-bin.000001	1188	Exec_load	1	1211	;file_id=1
-master-bin.000001	1211	Query	1	1288	use `test`; drop table t1
-show binlog events from 95 limit 1;
+master-bin.000001	4	Format_desc	1	96	Server ver: VERSION, Binlog ver: 4
+master-bin.000001	96	Query	1	218	use `test`; create table t1(n int not null auto_increment primary key)
+master-bin.000001	218	Intvar	1	246	INSERT_ID=1
+master-bin.000001	246	Query	1	338	use `test`; insert into t1 values (NULL)
+master-bin.000001	338	Query	1	415	use `test`; drop table t1
+master-bin.000001	415	Query	1	519	use `test`; create table t1 (word char(20) not null)
+master-bin.000001	519	Create_file	1	1189	db=test;table=t1;file_id=1;block_len=581
+master-bin.000001	1189	Exec_load	1	1212	;file_id=1
+master-bin.000001	1212	Query	1	1289	use `test`; drop table t1
+show binlog events from 96 limit 1;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-master-bin.000001	95	Query	1	217	use `test`; create table t1(n int not null auto_increment primary key)
-show binlog events from 95 limit 2;
+master-bin.000001	96	Query	1	218	use `test`; create table t1(n int not null auto_increment primary key)
+show binlog events from 96 limit 2;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-master-bin.000001	95	Query	1	217	use `test`; create table t1(n int not null auto_increment primary key)
-master-bin.000001	217	Intvar	1	245	INSERT_ID=1
-show binlog events from 95 limit 2,1;
+master-bin.000001	96	Query	1	218	use `test`; create table t1(n int not null auto_increment primary key)
+master-bin.000001	218	Intvar	1	246	INSERT_ID=1
+show binlog events from 96 limit 2,1;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-master-bin.000001	245	Query	1	337	use `test`; insert into t1 values (NULL)
+master-bin.000001	246	Query	1	338	use `test`; insert into t1 values (NULL)
 flush logs;
 create table t5 (a int);
 drop table t5;
@@ -49,24 +49,24 @@ insert into t1 values (1);
 drop table t1;
 show binlog events;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-master-bin.000001	4	Format_desc	1	95	Server ver: VERSION, Binlog ver: 4
-master-bin.000001	95	Query	1	217	use `test`; create table t1(n int not null auto_increment primary key)
-master-bin.000001	217	Intvar	1	245	INSERT_ID=1
-master-bin.000001	245	Query	1	337	use `test`; insert into t1 values (NULL)
-master-bin.000001	337	Query	1	414	use `test`; drop table t1
-master-bin.000001	414	Query	1	518	use `test`; create table t1 (word char(20) not null)
-master-bin.000001	518	Create_file	1	1188	db=test;table=t1;file_id=1;block_len=581
-master-bin.000001	1188	Exec_load	1	1211	;file_id=1
-master-bin.000001	1211	Query	1	1288	use `test`; drop table t1
-master-bin.000001	1288	Rotate	1	1332	master-bin.000002;pos=4
+master-bin.000001	4	Format_desc	1	96	Server ver: VERSION, Binlog ver: 4
+master-bin.000001	96	Query	1	218	use `test`; create table t1(n int not null auto_increment primary key)
+master-bin.000001	218	Intvar	1	246	INSERT_ID=1
+master-bin.000001	246	Query	1	338	use `test`; insert into t1 values (NULL)
+master-bin.000001	338	Query	1	415	use `test`; drop table t1
+master-bin.000001	415	Query	1	519	use `test`; create table t1 (word char(20) not null)
+master-bin.000001	519	Create_file	1	1189	db=test;table=t1;file_id=1;block_len=581
+master-bin.000001	1189	Exec_load	1	1212	;file_id=1
+master-bin.000001	1212	Query	1	1289	use `test`; drop table t1
+master-bin.000001	1289	Rotate	1	1333	master-bin.000002;pos=4
 show binlog events in 'master-bin.000002';
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-master-bin.000002	4	Format_desc	1	95	Server ver: VERSION, Binlog ver: 4
-master-bin.000002	95	Query	1	182	use `test`; create table t5 (a int)
-master-bin.000002	182	Query	1	259	use `test`; drop table t5
-master-bin.000002	259	Query	1	346	use `test`; create table t1 (n int)
-master-bin.000002	346	Query	1	435	use `test`; insert into t1 values (1)
-master-bin.000002	435	Query	1	512	use `test`; drop table t1
+master-bin.000002	4	Format_desc	1	96	Server ver: VERSION, Binlog ver: 4
+master-bin.000002	96	Query	1	183	use `test`; create table t5 (a int)
+master-bin.000002	183	Query	1	260	use `test`; drop table t5
+master-bin.000002	260	Query	1	347	use `test`; create table t1 (n int)
+master-bin.000002	347	Query	1	436	use `test`; insert into t1 values (1)
+master-bin.000002	436	Query	1	513	use `test`; drop table t1
 show binary logs;
 Log_name
 master-bin.000001
@@ -78,26 +78,26 @@ slave-bin.000001
 slave-bin.000002
 show binlog events in 'slave-bin.000001' from 4;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-slave-bin.000001	4	Format_desc	2	95	Server ver: VERSION, Binlog ver: 4
-slave-bin.000001	95	Query	1	217	use `test`; create table t1(n int not null auto_increment primary key)
-slave-bin.000001	217	Intvar	1	245	INSERT_ID=1
-slave-bin.000001	245	Query	1	337	use `test`; insert into t1 values (NULL)
-slave-bin.000001	337	Query	1	414	use `test`; drop table t1
-slave-bin.000001	414	Query	1	518	use `test`; create table t1 (word char(20) not null)
-slave-bin.000001	518	Create_file	1	1197	db=test;table=t1;file_id=1;block_len=581
-slave-bin.000001	1197	Exec_load	1	1220	;file_id=1
-slave-bin.000001	1220	Query	1	1297	use `test`; drop table t1
-slave-bin.000001	1297	Query	1	1384	use `test`; create table t5 (a int)
-slave-bin.000001	1384	Query	1	1461	use `test`; drop table t5
-slave-bin.000001	1461	Rotate	2	1504	slave-bin.000002;pos=4
+slave-bin.000001	4	Format_desc	2	96	Server ver: VERSION, Binlog ver: 4
+slave-bin.000001	96	Query	1	218	use `test`; create table t1(n int not null auto_increment primary key)
+slave-bin.000001	218	Intvar	1	246	INSERT_ID=1
+slave-bin.000001	246	Query	1	338	use `test`; insert into t1 values (NULL)
+slave-bin.000001	338	Query	1	415	use `test`; drop table t1
+slave-bin.000001	415	Query	1	519	use `test`; create table t1 (word char(20) not null)
+slave-bin.000001	519	Create_file	1	1198	db=test;table=t1;file_id=1;block_len=581
+slave-bin.000001	1198	Exec_load	1	1221	;file_id=1
+slave-bin.000001	1221	Query	1	1298	use `test`; drop table t1
+slave-bin.000001	1298	Query	1	1385	use `test`; create table t5 (a int)
+slave-bin.000001	1385	Query	1	1462	use `test`; drop table t5
+slave-bin.000001	1462	Rotate	2	1505	slave-bin.000002;pos=4
 show binlog events in 'slave-bin.000002' from 4;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-slave-bin.000002	4	Format_desc	2	95	Server ver: VERSION, Binlog ver: 4
-slave-bin.000002	95	Query	1	182	use `test`; create table t1 (n int)
-slave-bin.000002	182	Query	1	271	use `test`; insert into t1 values (1)
-slave-bin.000002	271	Query	1	348	use `test`; drop table t1
+slave-bin.000002	4	Format_desc	2	96	Server ver: VERSION, Binlog ver: 4
+slave-bin.000002	96	Query	1	183	use `test`; create table t1 (n int)
+slave-bin.000002	183	Query	1	272	use `test`; insert into t1 values (1)
+slave-bin.000002	272	Query	1	349	use `test`; drop table t1
 show slave status;
 Slave_IO_State	Master_Host	Master_User	Master_Port	Connect_Retry	Master_Log_File	Read_Master_Log_Pos	Relay_Log_File	Relay_Log_Pos	Relay_Master_Log_File	Slave_IO_Running	Slave_SQL_Running	Replicate_Do_DB	Replicate_Ignore_DB	Replicate_Do_Table	Replicate_Ignore_Table	Replicate_Wild_Do_Table	Replicate_Wild_Ignore_Table	Last_Errno	Last_Error	Skip_Counter	Exec_Master_Log_Pos	Relay_Log_Space	Until_Condition	Until_Log_File	Until_Log_Pos	Master_SSL_Allowed	Master_SSL_CA_File	Master_SSL_CA_Path	Master_SSL_Cert	Master_SSL_Cipher	Master_SSL_Key	Seconds_Behind_Master
-#	127.0.0.1	root	MASTER_PORT	1	master-bin.000002	512	#	#	master-bin.000002	Yes	Yes							0		0	512	#	None		0	No						#
+#	127.0.0.1	root	MASTER_PORT	1	master-bin.000002	513	#	#	master-bin.000002	Yes	Yes							0		0	513	#	None		0	No						#
 show binlog events in 'slave-bin.000005' from 4;
 ERROR HY000: Error when executing command SHOW BINLOG EVENTS: Could not find target log

mysql-test/r/rpl_log_pos.result

@@ -6,10 +6,10 @@ drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
 show master status;
 File	Position	Binlog_Do_DB	Binlog_Ignore_DB
-master-bin.000001	95		
+master-bin.000001	96		
 show slave status;
 Slave_IO_State	Master_Host	Master_User	Master_Port	Connect_Retry	Master_Log_File	Read_Master_Log_Pos	Relay_Log_File	Relay_Log_Pos	Relay_Master_Log_File	Slave_IO_Running	Slave_SQL_Running	Replicate_Do_DB	Replicate_Ignore_DB	Replicate_Do_Table	Replicate_Ignore_Table	Replicate_Wild_Do_Table	Replicate_Wild_Ignore_Table	Last_Errno	Last_Error	Skip_Counter	Exec_Master_Log_Pos	Relay_Log_Space	Until_Condition	Until_Log_File	Until_Log_Pos	Master_SSL_Allowed	Master_SSL_CA_File	Master_SSL_CA_Path	Master_SSL_Cert	Master_SSL_Cipher	Master_SSL_Key	Seconds_Behind_Master
-#	127.0.0.1	root	MASTER_PORT	1	master-bin.000001	95	#	#	master-bin.000001	Yes	Yes							0		0	95	#	None		0	No						#
+#	127.0.0.1	root	MASTER_PORT	1	master-bin.000001	96	#	#	master-bin.000001	Yes	Yes							0		0	96	#	None		0	No						#
 stop slave;
 change master to master_log_pos=73;
 start slave;
@@ -30,13 +30,13 @@ Slave_IO_State	Master_Host	Master_User	Master_Port	Connect_Retry	Master_Log_File
 #	127.0.0.1	root	MASTER_PORT	1	master-bin.000001	173	#	#	master-bin.000001	No	Yes							0		0	173	#	None		0	No						#
 show master status;
 File	Position	Binlog_Do_DB	Binlog_Ignore_DB
-master-bin.000001	95		
+master-bin.000001	96		
 create table if not exists t1 (n int);
 drop table if exists t1;
 create table t1 (n int);
 insert into t1 values (1),(2),(3);
 stop slave;
-change master to master_log_pos=95;
+change master to master_log_pos=96;
 start slave;
 select * from t1;
 n

mysql-test/r/rpl_max_relay_size.result

@@ -16,7 +16,7 @@ select @@global.max_relay_log_size;
 start slave;
 show slave status;
 Slave_IO_State	Master_Host	Master_User	Master_Port	Connect_Retry	Master_Log_File	Read_Master_Log_Pos	Relay_Log_File	Relay_Log_Pos	Relay_Master_Log_File	Slave_IO_Running	Slave_SQL_Running	Replicate_Do_DB	Replicate_Ignore_DB	Replicate_Do_Table	Replicate_Ignore_Table	Replicate_Wild_Do_Table	Replicate_Wild_Ignore_Table	Last_Errno	Last_Error	Skip_Counter	Exec_Master_Log_Pos	Relay_Log_Space	Until_Condition	Until_Log_File	Until_Log_Pos	Master_SSL_Allowed	Master_SSL_CA_File	Master_SSL_CA_Path	Master_SSL_Cert	Master_SSL_Cipher	Master_SSL_Key	Seconds_Behind_Master
-#	127.0.0.1	root	MASTER_PORT	1	master-bin.000001	73751	#	#	master-bin.000001	Yes	Yes							0		0	73751	#	None		0	No						#
+#	127.0.0.1	root	MASTER_PORT	1	master-bin.000001	73752	#	#	master-bin.000001	Yes	Yes							0		0	73752	#	None		0	No						#
 stop slave;
 reset slave;
 set global max_relay_log_size=(5*4096);
@@ -26,7 +26,7 @@ select @@global.max_relay_log_size;
 start slave;
 show slave status;
 Slave_IO_State	Master_Host	Master_User	Master_Port	Connect_Retry	Master_Log_File	Read_Master_Log_Pos	Relay_Log_File	Relay_Log_Pos	Relay_Master_Log_File	Slave_IO_Running	Slave_SQL_Running	Replicate_Do_DB	Replicate_Ignore_DB	Replicate_Do_Table	Replicate_Ignore_Table	Replicate_Wild_Do_Table	Replicate_Wild_Ignore_Table	Last_Errno	Last_Error	Skip_Counter	Exec_Master_Log_Pos	Relay_Log_Space	Until_Condition	Until_Log_File	Until_Log_Pos	Master_SSL_Allowed	Master_SSL_CA_File	Master_SSL_CA_Path	Master_SSL_Cert	Master_SSL_Cipher	Master_SSL_Key	Seconds_Behind_Master
-#	127.0.0.1	root	MASTER_PORT	1	master-bin.000001	73751	#	#	master-bin.000001	Yes	Yes							0		0	73751	#	None		0	No						#
+#	127.0.0.1	root	MASTER_PORT	1	master-bin.000001	73752	#	#	master-bin.000001	Yes	Yes							0		0	73752	#	None		0	No						#
 stop slave;
 reset slave;
 set global max_relay_log_size=0;
@@ -36,7 +36,7 @@ select @@global.max_relay_log_size;
 start slave;
 show slave status;
 Slave_IO_State	Master_Host	Master_User	Master_Port	Connect_Retry	Master_Log_File	Read_Master_Log_Pos	Relay_Log_File	Relay_Log_Pos	Relay_Master_Log_File	Slave_IO_Running	Slave_SQL_Running	Replicate_Do_DB	Replicate_Ignore_DB	Replicate_Do_Table	Replicate_Ignore_Table	Replicate_Wild_Do_Table	Replicate_Wild_Ignore_Table	Last_Errno	Last_Error	Skip_Counter	Exec_Master_Log_Pos	Relay_Log_Space	Until_Condition	Until_Log_File	Until_Log_Pos	Master_SSL_Allowed	Master_SSL_CA_File	Master_SSL_CA_Path	Master_SSL_Cert	Master_SSL_Cipher	Master_SSL_Key	Seconds_Behind_Master
-#	127.0.0.1	root	MASTER_PORT	1	master-bin.000001	73751	#	#	master-bin.000001	Yes	Yes							0		0	73751	#	None		0	No						#
+#	127.0.0.1	root	MASTER_PORT	1	master-bin.000001	73752	#	#	master-bin.000001	Yes	Yes							0		0	73752	#	None		0	No						#
 stop slave;
 reset slave;
 flush logs;
@@ -49,13 +49,13 @@ flush logs;
 create table t1 (a int);
 show slave status;
 Slave_IO_State	Master_Host	Master_User	Master_Port	Connect_Retry	Master_Log_File	Read_Master_Log_Pos	Relay_Log_File	Relay_Log_Pos	Relay_Master_Log_File	Slave_IO_Running	Slave_SQL_Running	Replicate_Do_DB	Replicate_Ignore_DB	Replicate_Do_Table	Replicate_Ignore_Table	Replicate_Wild_Do_Table	Replicate_Wild_Ignore_Table	Last_Errno	Last_Error	Skip_Counter	Exec_Master_Log_Pos	Relay_Log_Space	Until_Condition	Until_Log_File	Until_Log_Pos	Master_SSL_Allowed	Master_SSL_CA_File	Master_SSL_CA_Path	Master_SSL_Cert	Master_SSL_Cipher	Master_SSL_Key	Seconds_Behind_Master
-#	127.0.0.1	root	MASTER_PORT	1	master-bin.000001	73838	#	#	master-bin.000001	Yes	Yes							0		0	73838	#	None		0	No						#
+#	127.0.0.1	root	MASTER_PORT	1	master-bin.000001	73839	#	#	master-bin.000001	Yes	Yes							0		0	73839	#	None		0	No						#
 flush logs;
 drop table t1;
 show slave status;
 Slave_IO_State	Master_Host	Master_User	Master_Port	Connect_Retry	Master_Log_File	Read_Master_Log_Pos	Relay_Log_File	Relay_Log_Pos	Relay_Master_Log_File	Slave_IO_Running	Slave_SQL_Running	Replicate_Do_DB	Replicate_Ignore_DB	Replicate_Do_Table	Replicate_Ignore_Table	Replicate_Wild_Do_Table	Replicate_Wild_Ignore_Table	Last_Errno	Last_Error	Skip_Counter	Exec_Master_Log_Pos	Relay_Log_Space	Until_Condition	Until_Log_File	Until_Log_Pos	Master_SSL_Allowed	Master_SSL_CA_File	Master_SSL_CA_Path	Master_SSL_Cert	Master_SSL_Cipher	Master_SSL_Key	Seconds_Behind_Master
-#	127.0.0.1	root	MASTER_PORT	1	master-bin.000001	73915	#	#	master-bin.000001	Yes	Yes							0		0	73915	#	None		0	No						#
+#	127.0.0.1	root	MASTER_PORT	1	master-bin.000001	73916	#	#	master-bin.000001	Yes	Yes							0		0	73916	#	None		0	No						#
 flush logs;
 show master status;
 File	Position	Binlog_Do_DB	Binlog_Ignore_DB
-master-bin.000002	95		
+master-bin.000002	96		

mysql-test/r/rpl_multi_query.result

@@ -19,7 +19,7 @@ n
 3
 4
 5
-show binlog events from 95;
+show binlog events from 96;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	1	#	drop database if exists mysqltest
 master-bin.000001	#	Query	1	#	create database mysqltest

mysql-test/r/rpl_relayrotate.result

@@ -18,5 +18,5 @@ max(a)
 8000
 show slave status;
 Slave_IO_State	Master_Host	Master_User	Master_Port	Connect_Retry	Master_Log_File	Read_Master_Log_Pos	Relay_Log_File	Relay_Log_Pos	Relay_Master_Log_File	Slave_IO_Running	Slave_SQL_Running	Replicate_Do_DB	Replicate_Ignore_DB	Replicate_Do_Table	Replicate_Ignore_Table	Replicate_Wild_Do_Table	Replicate_Wild_Ignore_Table	Last_Errno	Last_Error	Skip_Counter	Exec_Master_Log_Pos	Relay_Log_Space	Until_Condition	Until_Log_File	Until_Log_Pos	Master_SSL_Allowed	Master_SSL_CA_File	Master_SSL_CA_Path	Master_SSL_Cert	Master_SSL_Cipher	Master_SSL_Key	Seconds_Behind_Master
-#	127.0.0.1	root	MASTER_MYPORT	1	master-bin.000001	743228	#	#	master-bin.000001	Yes	Yes							0		0	743228	#	None		0	No						#
+#	127.0.0.1	root	MASTER_MYPORT	1	master-bin.000001	743186	#	#	master-bin.000001	Yes	Yes							0		0	743186	#	None		0	No						#
 drop table t1;

mysql-test/r/rpl_replicate_do.result

@@ -28,4 +28,4 @@ ERROR 42S02: Table 'test.t11' doesn't exist
 drop table if exists t1,t2,t11;
 show slave status;
 Slave_IO_State	Master_Host	Master_User	Master_Port	Connect_Retry	Master_Log_File	Read_Master_Log_Pos	Relay_Log_File	Relay_Log_Pos	Relay_Master_Log_File	Slave_IO_Running	Slave_SQL_Running	Replicate_Do_DB	Replicate_Ignore_DB	Replicate_Do_Table	Replicate_Ignore_Table	Replicate_Wild_Do_Table	Replicate_Wild_Ignore_Table	Last_Errno	Last_Error	Skip_Counter	Exec_Master_Log_Pos	Relay_Log_Space	Until_Condition	Until_Log_File	Until_Log_Pos	Master_SSL_Allowed	Master_SSL_CA_File	Master_SSL_CA_Path	Master_SSL_Cert	Master_SSL_Cipher	Master_SSL_Key	Seconds_Behind_Master
-#	127.0.0.1	root	MASTER_PORT	1	master-bin.000001	1617	#	#	master-bin.000001	Yes	Yes			test.t1				0		0	1617	#	None		0	No						#
+#	127.0.0.1	root	MASTER_PORT	1	master-bin.000001	1618	#	#	master-bin.000001	Yes	Yes			test.t1				0		0	1618	#	None		0	No						#

mysql-test/r/rpl_reset_slave.result

@@ -6,12 +6,12 @@ drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
 show slave status;
 Slave_IO_State	Master_Host	Master_User	Master_Port	Connect_Retry	Master_Log_File	Read_Master_Log_Pos	Relay_Log_File	Relay_Log_Pos	Relay_Master_Log_File	Slave_IO_Running	Slave_SQL_Running	Replicate_Do_DB	Replicate_Ignore_DB	Replicate_Do_Table	Replicate_Ignore_Table	Replicate_Wild_Do_Table	Replicate_Wild_Ignore_Table	Last_Errno	Last_Error	Skip_Counter	Exec_Master_Log_Pos	Relay_Log_Space	Until_Condition	Until_Log_File	Until_Log_Pos	Master_SSL_Allowed	Master_SSL_CA_File	Master_SSL_CA_Path	Master_SSL_Cert	Master_SSL_Cipher	Master_SSL_Key	Seconds_Behind_Master
-#	127.0.0.1	root	MASTER_PORT	1	master-bin.000001	95	#	#	master-bin.000001	Yes	Yes							0		0	95	#	None		0	No						#
+#	127.0.0.1	root	MASTER_PORT	1	master-bin.000001	96	#	#	master-bin.000001	Yes	Yes							0		0	96	#	None		0	No						#
 stop slave;
 change master to master_user='test';
 show slave status;
 Slave_IO_State	Master_Host	Master_User	Master_Port	Connect_Retry	Master_Log_File	Read_Master_Log_Pos	Relay_Log_File	Relay_Log_Pos	Relay_Master_Log_File	Slave_IO_Running	Slave_SQL_Running	Replicate_Do_DB	Replicate_Ignore_DB	Replicate_Do_Table	Replicate_Ignore_Table	Replicate_Wild_Do_Table	Replicate_Wild_Ignore_Table	Last_Errno	Last_Error	Skip_Counter	Exec_Master_Log_Pos	Relay_Log_Space	Until_Condition	Until_Log_File	Until_Log_Pos	Master_SSL_Allowed	Master_SSL_CA_File	Master_SSL_CA_Path	Master_SSL_Cert	Master_SSL_Cipher	Master_SSL_Key	Seconds_Behind_Master
-#	127.0.0.1	test	MASTER_PORT	1	master-bin.000001	95	#	#	master-bin.000001	No	No							0		0	95	#	None		0	No						#
+#	127.0.0.1	test	MASTER_PORT	1	master-bin.000001	96	#	#	master-bin.000001	No	No							0		0	96	#	None		0	No						#
 reset slave;
 show slave status;
 Slave_IO_State	Master_Host	Master_User	Master_Port	Connect_Retry	Master_Log_File	Read_Master_Log_Pos	Relay_Log_File	Relay_Log_Pos	Relay_Master_Log_File	Slave_IO_Running	Slave_SQL_Running	Replicate_Do_DB	Replicate_Ignore_DB	Replicate_Do_Table	Replicate_Ignore_Table	Replicate_Wild_Do_Table	Replicate_Wild_Ignore_Table	Last_Errno	Last_Error	Skip_Counter	Exec_Master_Log_Pos	Relay_Log_Space	Until_Condition	Until_Log_File	Until_Log_Pos	Master_SSL_Allowed	Master_SSL_CA_File	Master_SSL_CA_Path	Master_SSL_Cert	Master_SSL_Cipher	Master_SSL_Key	Seconds_Behind_Master
@@ -19,7 +19,7 @@ Slave_IO_State	Master_Host	Master_User	Master_Port	Connect_Retry	Master_Log_File
 start slave;
 show slave status;
 Slave_IO_State	Master_Host	Master_User	Master_Port	Connect_Retry	Master_Log_File	Read_Master_Log_Pos	Relay_Log_File	Relay_Log_Pos	Relay_Master_Log_File	Slave_IO_Running	Slave_SQL_Running	Replicate_Do_DB	Replicate_Ignore_DB	Replicate_Do_Table	Replicate_Ignore_Table	Replicate_Wild_Do_Table	Replicate_Wild_Ignore_Table	Last_Errno	Last_Error	Skip_Counter	Exec_Master_Log_Pos	Relay_Log_Space	Until_Condition	Until_Log_File	Until_Log_Pos	Master_SSL_Allowed	Master_SSL_CA_File	Master_SSL_CA_Path	Master_SSL_Cert	Master_SSL_Cipher	Master_SSL_Key	Seconds_Behind_Master
-#	127.0.0.1	root	MASTER_PORT	1	master-bin.000001	95	#	#	master-bin.000001	Yes	Yes							0		0	95	#	None		0	No						#
+#	127.0.0.1	root	MASTER_PORT	1	master-bin.000001	96	#	#	master-bin.000001	Yes	Yes							0		0	96	#	None		0	No						#
 stop slave;
 reset slave;
 start slave;

mysql-test/r/rpl_rotate_logs.result

@@ -16,7 +16,7 @@ create table t1 (s text);
 insert into t1 values('Could not break slave'),('Tried hard');
 show slave status;
 Slave_IO_State	Master_Host	Master_User	Master_Port	Connect_Retry	Master_Log_File	Read_Master_Log_Pos	Relay_Log_File	Relay_Log_Pos	Relay_Master_Log_File	Slave_IO_Running	Slave_SQL_Running	Replicate_Do_DB	Replicate_Ignore_DB	Replicate_Do_Table	Replicate_Ignore_Table	Replicate_Wild_Do_Table	Replicate_Wild_Ignore_Table	Last_Errno	Last_Error	Skip_Counter	Exec_Master_Log_Pos	Relay_Log_Space	Until_Condition	Until_Log_File	Until_Log_Pos	Master_SSL_Allowed	Master_SSL_CA_File	Master_SSL_CA_Path	Master_SSL_Cert	Master_SSL_Cipher	Master_SSL_Key	Seconds_Behind_Master
-#	127.0.0.1	root	MASTER_PORT	60	master-bin.000001	549	#	#	master-bin.000001	Yes	Yes							0		0	549	#	None		0	No						#
+#	127.0.0.1	root	MASTER_PORT	60	master-bin.000001	550	#	#	master-bin.000001	Yes	Yes							0		0	550	#	None		0	No						#
 select * from t1;
 s
 Could not break slave
@@ -57,7 +57,7 @@ master-bin.000003
 insert into t2 values (65);
 show slave status;
 Slave_IO_State	Master_Host	Master_User	Master_Port	Connect_Retry	Master_Log_File	Read_Master_Log_Pos	Relay_Log_File	Relay_Log_Pos	Relay_Master_Log_File	Slave_IO_Running	Slave_SQL_Running	Replicate_Do_DB	Replicate_Ignore_DB	Replicate_Do_Table	Replicate_Ignore_Table	Replicate_Wild_Do_Table	Replicate_Wild_Ignore_Table	Last_Errno	Last_Error	Skip_Counter	Exec_Master_Log_Pos	Relay_Log_Space	Until_Condition	Until_Log_File	Until_Log_Pos	Master_SSL_Allowed	Master_SSL_CA_File	Master_SSL_CA_Path	Master_SSL_Cert	Master_SSL_Cipher	Master_SSL_Key	Seconds_Behind_Master
-#	127.0.0.1	root	MASTER_PORT	60	master-bin.000003	497	#	#	master-bin.000003	Yes	Yes							0		0	497	#	None		0	No						#
+#	127.0.0.1	root	MASTER_PORT	60	master-bin.000003	498	#	#	master-bin.000003	Yes	Yes							0		0	498	#	None		0	No						#
 select * from t2;
 m
 34
@@ -79,13 +79,13 @@ master-bin.000004
 master-bin.000005
 show master status;
 File	Position	Binlog_Do_DB	Binlog_Ignore_DB
-master-bin.000005	2050		
+master-bin.000005	2051		
 select * from t4;
 a
 testing temporary tables part 2
 show slave status;
 Slave_IO_State	Master_Host	Master_User	Master_Port	Connect_Retry	Master_Log_File	Read_Master_Log_Pos	Relay_Log_File	Relay_Log_Pos	Relay_Master_Log_File	Slave_IO_Running	Slave_SQL_Running	Replicate_Do_DB	Replicate_Ignore_DB	Replicate_Do_Table	Replicate_Ignore_Table	Replicate_Wild_Do_Table	Replicate_Wild_Ignore_Table	Last_Errno	Last_Error	Skip_Counter	Exec_Master_Log_Pos	Relay_Log_Space	Until_Condition	Until_Log_File	Until_Log_Pos	Master_SSL_Allowed	Master_SSL_CA_File	Master_SSL_CA_Path	Master_SSL_Cert	Master_SSL_Cipher	Master_SSL_Key	Seconds_Behind_Master
-#	127.0.0.1	root	MASTER_PORT	60	master-bin.000005	2050	#	#	master-bin.000005	Yes	Yes							0		0	2050	#	None		0	No						#
+#	127.0.0.1	root	MASTER_PORT	60	master-bin.000005	2051	#	#	master-bin.000005	Yes	Yes							0		0	2051	#	None		0	No						#
 lock tables t3 read;
 select count(*) from t3 where n >= 4;
 count(*)

mysql-test/r/rpl_server_id1.result

@@ -10,7 +10,7 @@ stop slave;
 change master to master_port=SLAVE_PORT;
 show slave status;
 Slave_IO_State	Master_Host	Master_User	Master_Port	Connect_Retry	Master_Log_File	Read_Master_Log_Pos	Relay_Log_File	Relay_Log_Pos	Relay_Master_Log_File	Slave_IO_Running	Slave_SQL_Running	Replicate_Do_DB	Replicate_Ignore_DB	Replicate_Do_Table	Replicate_Ignore_Table	Replicate_Wild_Do_Table	Replicate_Wild_Ignore_Table	Last_Errno	Last_Error	Skip_Counter	Exec_Master_Log_Pos	Relay_Log_Space	Until_Condition	Until_Log_File	Until_Log_Pos	Master_SSL_Allowed	Master_SSL_CA_File	Master_SSL_CA_Path	Master_SSL_Cert	Master_SSL_Cipher	Master_SSL_Key	Seconds_Behind_Master
-	127.0.0.1	root	SLAVE_PORT	1		4	slave-relay-bin.000001	4		No	No						#	0		0	0	95	None		0	No						NULL
+	127.0.0.1	root	SLAVE_PORT	1		4	slave-relay-bin.000001	4		No	No						#	0		0	0	96	None		0	No						NULL
 start slave;
 insert into t1 values (1);
 show status like "slave_running";

mysql-test/r/rpl_server_id2.result

@@ -10,7 +10,7 @@ stop slave;
 change master to master_port=SLAVE_PORT;
 show slave status;
 Slave_IO_State	Master_Host	Master_User	Master_Port	Connect_Retry	Master_Log_File	Read_Master_Log_Pos	Relay_Log_File	Relay_Log_Pos	Relay_Master_Log_File	Slave_IO_Running	Slave_SQL_Running	Replicate_Do_DB	Replicate_Ignore_DB	Replicate_Do_Table	Replicate_Ignore_Table	Replicate_Wild_Do_Table	Replicate_Wild_Ignore_Table	Last_Errno	Last_Error	Skip_Counter	Exec_Master_Log_Pos	Relay_Log_Space	Until_Condition	Until_Log_File	Until_Log_Pos	Master_SSL_Allowed	Master_SSL_CA_File	Master_SSL_CA_Path	Master_SSL_Cert	Master_SSL_Cipher	Master_SSL_Key	Seconds_Behind_Master
-	127.0.0.1	root	SLAVE_PORT	1		4	slave-relay-bin.000001	4		No	No						#	0		0	0	95	None		0	No						NULL
+	127.0.0.1	root	SLAVE_PORT	1		4	slave-relay-bin.000001	4		No	No						#	0		0	0	96	None		0	No						NULL
 start slave;
 insert into t1 values (1);
 select * from t1;

mysql-test/r/rpl_temporary.result

@@ -38,19 +38,19 @@ f
 7
 show binlog events;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-master-bin.000001	4	Format_desc	1	95	Server ver: VERSION, Binlog ver: 4
-master-bin.000001	95	Query	1	185	use `test`; drop table if exists t1,t2
-master-bin.000001	185	Query	1	271	use `test`; create table t1(f int)
-master-bin.000001	271	Query	1	357	use `test`; create table t2(f int)
-master-bin.000001	357	Query	1	483	use `test`; insert into t1 values (1),(2),(3),(4),(5),(6),(7),(8),(9),(10)
-master-bin.000001	483	Query	1	579	use `test`; create temporary table t3(f int)
-master-bin.000001	579	Query	1	684	use `test`; insert into t3 select * from t1 where f<6
-master-bin.000001	684	Query	1	780	use `test`; create temporary table t3(f int)
-master-bin.000001	780	Query	1	882	use `test`; insert into t2 select count(*) from t3
-master-bin.000001	882	Query	1	988	use `test`; insert into t3 select * from t1 where f>=4
-master-bin.000001	988	Query	1	1075	use `test`; drop temporary table t3
-master-bin.000001	1075	Query	1	1177	use `test`; insert into t2 select count(*) from t3
-master-bin.000001	1177	Query	1	1264	use `test`; drop temporary table t3
+master-bin.000001	4	Format_desc	1	96	Server ver: VERSION, Binlog ver: 4
+master-bin.000001	96	Query	1	186	use `test`; drop table if exists t1,t2
+master-bin.000001	186	Query	1	272	use `test`; create table t1(f int)
+master-bin.000001	272	Query	1	358	use `test`; create table t2(f int)
+master-bin.000001	358	Query	1	484	use `test`; insert into t1 values (1),(2),(3),(4),(5),(6),(7),(8),(9),(10)
+master-bin.000001	484	Query	1	580	use `test`; create temporary table t3(f int)
+master-bin.000001	580	Query	1	685	use `test`; insert into t3 select * from t1 where f<6
+master-bin.000001	685	Query	1	781	use `test`; create temporary table t3(f int)
+master-bin.000001	781	Query	1	883	use `test`; insert into t2 select count(*) from t3
+master-bin.000001	883	Query	1	989	use `test`; insert into t3 select * from t1 where f>=4
+master-bin.000001	989	Query	1	1076	use `test`; drop temporary table t3
+master-bin.000001	1076	Query	1	1178	use `test`; insert into t2 select count(*) from t3
+master-bin.000001	1178	Query	1	1265	use `test`; drop temporary table t3
 drop table t1, t2;
 use test;
 SET TIMESTAMP=1040323920;

mysql-test/r/rpl_timezone.result

@@ -32,13 +32,13 @@ t
 2004-06-11 09:39:02
 show binlog events;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-master-bin.000001	4	Format_desc	1	95	Server ver: VERSION, Binlog ver: 4
-master-bin.000001	95	Query	1	188	use `test`; create table t1 (t timestamp)
-master-bin.000001	188	Query	1	280	use `test`; create table t2 (t char(32))
-master-bin.000001	280	Query	1	372	use `test`; SET ONE_SHOT TIME_ZONE='UTC'
-master-bin.000001	372	Query	1	496	use `test`; insert into t1 values ('20040101000000'), ('20040611093902')
-master-bin.000001	496	Query	1	574	use `test`; delete from t1
-master-bin.000001	574	Query	1	698	use `test`; insert into t1 values ('20040101000000'), ('20040611093902')
+master-bin.000001	4	Format_desc	1	96	Server ver: VERSION, Binlog ver: 4
+master-bin.000001	96	Query	1	189	use `test`; create table t1 (t timestamp)
+master-bin.000001	189	Query	1	281	use `test`; create table t2 (t char(32))
+master-bin.000001	281	Query	1	373	use `test`; SET ONE_SHOT TIME_ZONE='UTC'
+master-bin.000001	373	Query	1	497	use `test`; insert into t1 values ('20040101000000'), ('20040611093902')
+master-bin.000001	497	Query	1	575	use `test`; delete from t1
+master-bin.000001	575	Query	1	699	use `test`; insert into t1 values ('20040101000000'), ('20040611093902')
 set time_zone='MET';
 insert into t2 (select t from t1);
 select * from t1;

mysql-test/r/rpl_trunc_binlog.result

@@ -6,8 +6,12 @@ drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
 stop slave;
 flush logs;
+create table t1 (a int) engine=bdb;
 reset slave;
 start slave;
 show slave status;
 Slave_IO_State	Master_Host	Master_User	Master_Port	Connect_Retry	Master_Log_File	Read_Master_Log_Pos	Relay_Log_File	Relay_Log_Pos	Relay_Master_Log_File	Slave_IO_Running	Slave_SQL_Running	Replicate_Do_DB	Replicate_Ignore_DB	Replicate_Do_Table	Replicate_Ignore_Table	Replicate_Wild_Do_Table	Replicate_Wild_Ignore_Table	Last_Errno	Last_Error	Skip_Counter	Exec_Master_Log_Pos	Relay_Log_Space	Until_Condition	Until_Log_File	Until_Log_Pos	Master_SSL_Allowed	Master_SSL_CA_File	Master_SSL_CA_Path	Master_SSL_Cert	Master_SSL_Cipher	Master_SSL_Key	Seconds_Behind_Master
-#	127.0.0.1	root	MASTER_PORT	1	master-bin.000002	4	#	#	master-bin.000001	Yes	No							0	Rolling back unfinished transaction (no COMMIT or ROLLBACK) from relay log. A probable cause is that the master died while writing the transaction to its binary log.	0	79	#	None		0	No						#
+#	127.0.0.1	root	MASTER_PORT	1	master-bin.000002	4	#	#	master-bin.000002	Yes	Yes							0	Rolling back unfinished transaction (no COMMIT or ROLLBACK) from relay log. A probable cause is that the master died while writing the transaction to its binary log.	0	4	#	None		0	No						#
+select * from t1;
+a
+drop table t1;

mysql-test/r/rpl_until.result

@@ -14,14 +14,14 @@ insert into t2 values (3),(4);
 drop table t2;
 show binlog events;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-master-bin.000001	4	Format_desc	1	95	Server ver: VERSION, Binlog ver: 4
-master-bin.000001	95	Query	1	217	use `test`; create table t1(n int not null auto_increment primary key)
-master-bin.000001	217	Query	1	318	use `test`; insert into t1 values (1),(2),(3),(4)
-master-bin.000001	318	Query	1	395	use `test`; drop table t1
-master-bin.000001	395	Query	1	517	use `test`; create table t2(n int not null auto_increment primary key)
-master-bin.000001	517	Query	1	610	use `test`; insert into t2 values (1),(2)
-master-bin.000001	610	Query	1	703	use `test`; insert into t2 values (3),(4)
-master-bin.000001	703	Query	1	780	use `test`; drop table t2
+master-bin.000001	4	Format_desc	1	96	Server ver: VERSION, Binlog ver: 4
+master-bin.000001	96	Query	1	218	use `test`; create table t1(n int not null auto_increment primary key)
+master-bin.000001	218	Query	1	319	use `test`; insert into t1 values (1),(2),(3),(4)
+master-bin.000001	319	Query	1	396	use `test`; drop table t1
+master-bin.000001	396	Query	1	518	use `test`; create table t2(n int not null auto_increment primary key)
+master-bin.000001	518	Query	1	611	use `test`; insert into t2 values (1),(2)
+master-bin.000001	611	Query	1	704	use `test`; insert into t2 values (3),(4)
+master-bin.000001	704	Query	1	781	use `test`; drop table t2
 start slave until master_log_file='master-bin.000001', master_log_pos=304;
 select * from t1;
 n
@@ -31,7 +31,7 @@ n
 4
 show slave status;
 Slave_IO_State	Master_Host	Master_User	Master_Port	Connect_Retry	Master_Log_File	Read_Master_Log_Pos	Relay_Log_File	Relay_Log_Pos	Relay_Master_Log_File	Slave_IO_Running	Slave_SQL_Running	Replicate_Do_DB	Replicate_Ignore_DB	Replicate_Do_Table	Replicate_Ignore_Table	Replicate_Wild_Do_Table	Replicate_Wild_Ignore_Table	Last_Errno	Last_Error	Skip_Counter	Exec_Master_Log_Pos	Relay_Log_Space	Until_Condition	Until_Log_File	Until_Log_Pos	Master_SSL_Allowed	Master_SSL_CA_File	Master_SSL_CA_Path	Master_SSL_Cert	Master_SSL_Cipher	Master_SSL_Key	Seconds_Behind_Master
-#	127.0.0.1	root	MASTER_MYPORT	1	master-bin.000001	780	slave-relay-bin.000004	#	master-bin.000001	Yes	No							0		0	318	#	Master	master-bin.000001	304	No						#
+#	127.0.0.1	root	MASTER_MYPORT	1	master-bin.000001	781	slave-relay-bin.000004	#	master-bin.000001	Yes	No							0		0	319	#	Master	master-bin.000001	304	No						#
 start slave until master_log_file='master-no-such-bin.000001', master_log_pos=291;
 select * from t1;
 n
@@ -41,7 +41,7 @@ n
 4
 show slave status;
 Slave_IO_State	Master_Host	Master_User	Master_Port	Connect_Retry	Master_Log_File	Read_Master_Log_Pos	Relay_Log_File	Relay_Log_Pos	Relay_Master_Log_File	Slave_IO_Running	Slave_SQL_Running	Replicate_Do_DB	Replicate_Ignore_DB	Replicate_Do_Table	Replicate_Ignore_Table	Replicate_Wild_Do_Table	Replicate_Wild_Ignore_Table	Last_Errno	Last_Error	Skip_Counter	Exec_Master_Log_Pos	Relay_Log_Space	Until_Condition	Until_Log_File	Until_Log_Pos	Master_SSL_Allowed	Master_SSL_CA_File	Master_SSL_CA_Path	Master_SSL_Cert	Master_SSL_Cipher	Master_SSL_Key	Seconds_Behind_Master
-#	127.0.0.1	root	MASTER_MYPORT	1	master-bin.000001	780	slave-relay-bin.000004	#	master-bin.000001	Yes	No							0		0	318	#	Master	master-no-such-bin.000001	291	No						#
+#	127.0.0.1	root	MASTER_MYPORT	1	master-bin.000001	781	slave-relay-bin.000004	#	master-bin.000001	Yes	No							0		0	319	#	Master	master-no-such-bin.000001	291	No						#
 start slave until relay_log_file='slave-relay-bin.000004', relay_log_pos=710;
 select * from t2;
 n
@@ -49,13 +49,13 @@ n
 2
 show slave status;
 Slave_IO_State	Master_Host	Master_User	Master_Port	Connect_Retry	Master_Log_File	Read_Master_Log_Pos	Relay_Log_File	Relay_Log_Pos	Relay_Master_Log_File	Slave_IO_Running	Slave_SQL_Running	Replicate_Do_DB	Replicate_Ignore_DB	Replicate_Do_Table	Replicate_Ignore_Table	Replicate_Wild_Do_Table	Replicate_Wild_Ignore_Table	Last_Errno	Last_Error	Skip_Counter	Exec_Master_Log_Pos	Relay_Log_Space	Until_Condition	Until_Log_File	Until_Log_Pos	Master_SSL_Allowed	Master_SSL_CA_File	Master_SSL_CA_Path	Master_SSL_Cert	Master_SSL_Cipher	Master_SSL_Key	Seconds_Behind_Master
-#	127.0.0.1	root	MASTER_MYPORT	1	master-bin.000001	780	slave-relay-bin.000004	#	master-bin.000001	Yes	No							0		0	610	#	Relay	slave-relay-bin.000004	710	No						#
+#	127.0.0.1	root	MASTER_MYPORT	1	master-bin.000001	781	slave-relay-bin.000004	#	master-bin.000001	Yes	No							0		0	611	#	Relay	slave-relay-bin.000004	710	No						#
 start slave;
 stop slave;
 start slave until master_log_file='master-bin.000001', master_log_pos=710;
 show slave status;
 Slave_IO_State	Master_Host	Master_User	Master_Port	Connect_Retry	Master_Log_File	Read_Master_Log_Pos	Relay_Log_File	Relay_Log_Pos	Relay_Master_Log_File	Slave_IO_Running	Slave_SQL_Running	Replicate_Do_DB	Replicate_Ignore_DB	Replicate_Do_Table	Replicate_Ignore_Table	Replicate_Wild_Do_Table	Replicate_Wild_Ignore_Table	Last_Errno	Last_Error	Skip_Counter	Exec_Master_Log_Pos	Relay_Log_Space	Until_Condition	Until_Log_File	Until_Log_Pos	Master_SSL_Allowed	Master_SSL_CA_File	Master_SSL_CA_Path	Master_SSL_Cert	Master_SSL_Cipher	Master_SSL_Key	Seconds_Behind_Master
-#	127.0.0.1	root	MASTER_MYPORT	1	master-bin.000001	780	slave-relay-bin.000004	#	master-bin.000001	Yes	No							0		0	780	#	Master	master-bin.000001	710	No						#
+#	127.0.0.1	root	MASTER_MYPORT	1	master-bin.000001	781	slave-relay-bin.000004	#	master-bin.000001	Yes	No							0		0	781	#	Master	master-bin.000001	710	No						#
 start slave until master_log_file='master-bin', master_log_pos=561;
 ERROR HY000: Incorrect parameter or combination of parameters for START SLAVE UNTIL
 start slave until master_log_file='master-bin.000001', master_log_pos=561, relay_log_pos=12;

mysql-test/r/rpl_user_variables.result

@@ -76,35 +76,35 @@ abcn1n2
 NULL
 NULL
 NULL
-show binlog events from 95;
+show binlog events from 96;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-slave-bin.000001	95	Query	1	186	use `test`; create table t1(n char(30))
-slave-bin.000001	186	User var	2	229	@`i1`=12345678901234
-slave-bin.000001	229	User var	2	272	@`i2`=-12345678901234
-slave-bin.000001	272	User var	2	315	@`i3`=0
-slave-bin.000001	315	User var	2	358	@`i4`=-1
-slave-bin.000001	358	Query	1	470	use `test`; insert into t1 values (@i1), (@i2), (@i3), (@i4)
-slave-bin.000001	470	User var	2	509	@`r1`=12.5
-slave-bin.000001	509	User var	2	548	@`r2`=-12.5
-slave-bin.000001	548	Query	1	646	use `test`; insert into t1 values (@r1), (@r2)
-slave-bin.000001	646	User var	2	695	@`s1`=_latin1 0x5468697320697320612074657374 COLLATE latin1_swedish_ci
-slave-bin.000001	695	User var	2	730	@`s2`=_latin1 "" COLLATE latin1_swedish_ci
-slave-bin.000001	730	User var	2	772	@`s3`=_latin1 0x61626327646566 COLLATE latin1_swedish_ci
-slave-bin.000001	772	User var	2	814	@`s4`=_latin1 0x6162635C646566 COLLATE latin1_swedish_ci
-slave-bin.000001	814	User var	2	856	@`s5`=_latin1 0x61626327646566 COLLATE latin1_swedish_ci
-slave-bin.000001	856	Query	1	975	use `test`; insert into t1 values (@s1), (@s2), (@s3), (@s4), (@s5)
-slave-bin.000001	975	User var	2	1001	@`n1`=NULL
-slave-bin.000001	1001	Query	1	1092	use `test`; insert into t1 values (@n1)
-slave-bin.000001	1092	User var	2	1118	@`n2`=NULL
-slave-bin.000001	1118	Query	1	1209	use `test`; insert into t1 values (@n2)
-slave-bin.000001	1209	Query	1	1326	use `test`; insert into t1 values (@a:=0), (@a:=@a+1), (@a:=@a+1)
-slave-bin.000001	1326	User var	2	1368	@`a`=2
-slave-bin.000001	1368	Query	1	1469	use `test`; insert into t1 values (@a+(@b:=@a+1))
-slave-bin.000001	1469	User var	2	1506	@`q`=_latin1 0x616263 COLLATE latin1_swedish_ci
-slave-bin.000001	1506	Query	1	1639	use `test`; insert t1 values (@q), (@q:=concat(@q, 'n1')), (@q:=concat(@q, 'n2'))
-slave-bin.000001	1639	User var	2	1681	@`a`=5
-slave-bin.000001	1681	Query	1	1776	use `test`; insert into t1 values (@a),(@a)
-slave-bin.000001	1776	User var	2	1801	@`a`=NULL
-slave-bin.000001	1801	Query	1	1903	use `test`; insert into t1 values (@a),(@a),(@a*5)
+slave-bin.000001	96	Query	1	187	use `test`; create table t1(n char(30))
+slave-bin.000001	187	User var	2	230	@`i1`=12345678901234
+slave-bin.000001	230	User var	2	273	@`i2`=-12345678901234
+slave-bin.000001	273	User var	2	316	@`i3`=0
+slave-bin.000001	316	User var	2	359	@`i4`=-1
+slave-bin.000001	359	Query	1	471	use `test`; insert into t1 values (@i1), (@i2), (@i3), (@i4)
+slave-bin.000001	471	User var	2	510	@`r1`=12.5
+slave-bin.000001	510	User var	2	549	@`r2`=-12.5
+slave-bin.000001	549	Query	1	647	use `test`; insert into t1 values (@r1), (@r2)
+slave-bin.000001	647	User var	2	696	@`s1`=_latin1 0x5468697320697320612074657374 COLLATE latin1_swedish_ci
+slave-bin.000001	696	User var	2	731	@`s2`=_latin1 "" COLLATE latin1_swedish_ci
+slave-bin.000001	731	User var	2	773	@`s3`=_latin1 0x61626327646566 COLLATE latin1_swedish_ci
+slave-bin.000001	773	User var	2	815	@`s4`=_latin1 0x6162635C646566 COLLATE latin1_swedish_ci
+slave-bin.000001	815	User var	2	857	@`s5`=_latin1 0x61626327646566 COLLATE latin1_swedish_ci
+slave-bin.000001	857	Query	1	976	use `test`; insert into t1 values (@s1), (@s2), (@s3), (@s4), (@s5)
+slave-bin.000001	976	User var	2	1002	@`n1`=NULL
+slave-bin.000001	1002	Query	1	1093	use `test`; insert into t1 values (@n1)
+slave-bin.000001	1093	User var	2	1119	@`n2`=NULL
+slave-bin.000001	1119	Query	1	1210	use `test`; insert into t1 values (@n2)
+slave-bin.000001	1210	Query	1	1327	use `test`; insert into t1 values (@a:=0), (@a:=@a+1), (@a:=@a+1)
+slave-bin.000001	1327	User var	2	1369	@`a`=2
+slave-bin.000001	1369	Query	1	1470	use `test`; insert into t1 values (@a+(@b:=@a+1))
+slave-bin.000001	1470	User var	2	1507	@`q`=_latin1 0x616263 COLLATE latin1_swedish_ci
+slave-bin.000001	1507	Query	1	1640	use `test`; insert t1 values (@q), (@q:=concat(@q, 'n1')), (@q:=concat(@q, 'n2'))
+slave-bin.000001	1640	User var	2	1682	@`a`=5
+slave-bin.000001	1682	Query	1	1777	use `test`; insert into t1 values (@a),(@a)
+slave-bin.000001	1777	User var	2	1802	@`a`=NULL
+slave-bin.000001	1802	Query	1	1904	use `test`; insert into t1 values (@a),(@a),(@a*5)
 drop table t1;
 stop slave;

mysql-test/r/sp.result

@@ -2069,6 +2069,97 @@ call bug8540()|
 y	z
 1	1
 drop procedure bug8540|
+drop table if exists t3|
+create table t3 (s1 int)|
+drop procedure if exists bug6642|
+create procedure bug6642()
+select abs(count(s1)) from t3|
+call bug6642()|
+abs(count(s1))
+0
+call bug6642()|
+abs(count(s1))
+0
+drop procedure bug6642|
+insert into t3 values (0),(1)|
+drop procedure if exists bug7013|
+create procedure bug7013()
+select s1,count(s1) from t3 group by s1 with rollup|
+call bug7013()|
+s1	count(s1)
+0	1
+1	1
+NULL	2
+call bug7013()|
+s1	count(s1)
+0	1
+1	1
+NULL	2
+drop procedure bug7013|
+drop table if exists t4;
+--enable_warnings|
+create table t4 (
+a mediumint(8) unsigned not null auto_increment,
+b smallint(5) unsigned not null,
+c char(32) not null,
+primary key  (a)
+) engine=myisam default charset=latin1|
+insert into t4 values (1, 2, 'oneword')|
+insert into t4 values (2, 2, 'anotherword')|
+drop procedure if exists bug7743|
+create procedure bug7743 ( searchstring char(28) )
+begin
+declare var mediumint(8) unsigned;
+select a into var from t4 where b = 2 and c = binary searchstring limit 1;
+select var;
+end|
+call bug7743("oneword")|
+var
+1
+call bug7743("OneWord")|
+var
+NULL
+call bug7743("anotherword")|
+var
+2
+call bug7743("AnotherWord")|
+var
+NULL
+drop procedure bug7743|
+drop table t4|
+delete from t3|
+insert into t3 values(1)|
+drop procedure if exists bug7992_1|
+Warnings:
+Note	1305	PROCEDURE bug7992_1 does not exist
+drop procedure if exists bug7992_2|
+Warnings:
+Note	1305	PROCEDURE bug7992_2 does not exist
+create procedure bug7992_1()
+begin
+declare i int;
+select max(s1)+1 into i from t3;
+end|
+create procedure bug7992_2()
+insert into t3 (s1) select max(t4.s1)+1 from t3 as t4|
+call bug7992_1()|
+call bug7992_1()|
+call bug7992_2()|
+call bug7992_2()|
+drop procedure bug7992_1|
+drop procedure bug7992_2|
+drop table t3|
+drop table if exists t3|
+create table t3 (  userid bigint(20) not null default 0 )|
+drop procedure if exists bug8116|
+create procedure bug8116(in _userid int)
+select * from t3 where userid = _userid|
+call bug8116(42)|
+userid
+call bug8116(42)|
+userid
+drop procedure bug8116|
+drop table t3|
 drop table if exists fac|
 create table fac (n int unsigned not null primary key, f bigint unsigned)|
 drop procedure if exists ifac|

mysql-test/r/type_decimal.result

@@ -169,8 +169,19 @@ Warnings:
 Warning	1264	Out of range value adjusted for column 'a' at row 1
 Note	1265	Data truncated for column 'a' at row 2
 Warning	1264	Out of range value adjusted for column 'a' at row 3
+insert into t1 values ("1e+4294967296"),("1e-4294967296");
+Warnings:
+Warning	1264	Out of range value adjusted for column 'a' at row 1
+Note	1265	Data truncated for column 'a' at row 2
+insert into t1 values ("1e+18446744073709551615"),("1e+18446744073709551616"),("1e-9223372036854775807"),("1e-9223372036854775809");
+Warnings:
+Warning	1264	Out of range value adjusted for column 'a' at row 1
+Warning	1366	Incorrect decimal value: '1e+18446744073709551616' for column 'a' at row 2
+Note	1265	Data truncated for column 'a' at row 3
+Warning	1366	Incorrect decimal value: '1e-9223372036854775809' for column 'a' at row 4
 insert into t1 values ("123.4e"),("123.4e+2"),("123.4e-2"),("123e1"),("123e+0");
 Warnings:
+Note	1265	Data truncated for column 'a' at row 1
 Note	1265	Data truncated for column 'a' at row 3
 select * from t1;
 a
@@ -195,6 +206,12 @@ a
 99999999.99
 0.00
 -99999999.99
+99999999.99
+0.00
+99999999.99
+0.00
+0.00
+0.00
 123.40
 12340.00
 1.23
@@ -229,6 +246,7 @@ Note	1265	Data truncated for column 'a' at row 2
 Warning	1264	Out of range value adjusted for column 'a' at row 3
 insert into t1 values ("123.4e"),("123.4e+2"),("123.4e-2"),("123e1"),("123e+0");
 Warnings:
+Note	1265	Data truncated for column 'a' at row 1
 Note	1265	Data truncated for column 'a' at row 3
 select * from t1;
 a
@@ -287,6 +305,7 @@ Note	1265	Data truncated for column 'a' at row 2
 Warning	1264	Out of range value adjusted for column 'a' at row 3
 insert into t1 values ("123.4e"),("123.4e+2"),("123.4e-2"),("123e1"),("123e+0");
 Warnings:
+Note	1265	Data truncated for column 'a' at row 1
 Note	1265	Data truncated for column 'a' at row 3
 select * from t1;
 a
@@ -338,6 +357,7 @@ Warning	1264	Out of range value adjusted for column 'a' at row 3
 insert into t1 values (123.4e0),(123.4e+2),(123.4e-2),(123e1),(123e+0);
 Warnings:
 Note	1265	Data truncated for column 'a' at row 3
+insert into t1 values (MID("987",1,2)),("987 "),("987.6e+2 ");
 select * from t1;
 a
 0.00
@@ -366,6 +386,9 @@ a
 1.23
 1230.00
 123.00
+98.00
+987.00
+98760.00
 drop  table t1;
 create table t1 (a decimal);
 insert into t1 values (-99999999999999),(-1),('+1'),('01'),('+00000000000001'),('+12345678901'),(99999999999999);

mysql-test/r/type_newdecimal.result

@@ -696,7 +696,7 @@ end while; select v1, v2, v3 * 0.000000000001, v4 * 0.000000000001; end;//
 call p1()//
 #
 v1	v2	v3 * 0.000000000001	v4 * 0.000000000001
-1.000000100000	1.999999900000	1.000000100000000000	1.999999900000000000
+1.000000100000	1.999999900000	1.000000100000	1.999999900000
 drop procedure p1;
 drop table if exists t1;
 Warnings:

mysql-test/r/user_var.result

@@ -174,14 +174,15 @@ INSERT INTO t1 VALUES(@`a b`);
 set @var1= "';aaa";
 SET @var2=char(ascii('a'));
 insert into t1 values (@var1),(@var2);
-show binlog events from 95;
+show binlog events from 96;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-master-bin.000001	95	User var	1	136	@`a b`=_latin1 0x68656C6C6F COLLATE latin1_swedish_ci
-master-bin.000001	136	Query	1	229	use `test`; INSERT INTO t1 VALUES(@`a b`)
-master-bin.000001	229	User var	1	271	@`var1`=_latin1 0x273B616161 COLLATE latin1_swedish_ci
-master-bin.000001	271	User var	1	309	@`var2`=_latin1 0x61 COLLATE latin1_swedish_ci
-master-bin.000001	309	Query	1	410	use `test`; insert into t1 values (@var1),(@var2)
+master-bin.000001	96	User var	1	137	@`a b`=_latin1 0x68656C6C6F COLLATE latin1_swedish_ci
+master-bin.000001	137	Query	1	230	use `test`; INSERT INTO t1 VALUES(@`a b`)
+master-bin.000001	230	User var	1	272	@`var1`=_latin1 0x273B616161 COLLATE latin1_swedish_ci
+master-bin.000001	272	User var	1	310	@`var2`=_latin1 0x61 COLLATE latin1_swedish_ci
+master-bin.000001	310	Query	1	411	use `test`; insert into t1 values (@var1),(@var2)
 /*!40019 SET @@session.max_insert_delayed_threads=0*/;
+ROLLBACK;
 SET @`a b`:=_latin1 0x68656C6C6F COLLATE `latin1_swedish_ci`;
 use test;
 SET TIMESTAMP=10000;

mysql-test/t/ctype_latin1_de.test

@@ -116,3 +116,19 @@ SELECT FIELD('ue',s1), FIELD('
 DROP TABLE t1;
 
 -- source include/ctype_filesort.inc
+
+#
+# Bug#7878 with utf8_general_ci, equals (=) has problem with
+# accent insensitivity.
+# Although originally this problem was found with UTF8 character set,
+# '=' behaved wrong for latin1_german2_ci as well.
+# Let's check it does not work incorrect anymore.
+# 
+SET NAMES latin1;
+CREATE TABLE t1 (
+  col1 varchar(255) NOT NULL default ''
+) ENGINE=MyISAM DEFAULT CHARSET=latin1 collate latin1_german2_ci;
+INSERT INTO t1 VALUES (''),('ss'),('ss');
+ALTER TABLE t1 ADD KEY ifword(col1);
+SELECT * FROM t1 WHERE col1='' ORDER BY col1, BINARY col1;
+DROP TABLE t1;

mysql-test/t/ctype_ucs.test

@@ -338,7 +338,7 @@ create table t2 (c char(30)) charset=ucs2;
 set @v=convert('abc' using ucs2);
 reset master;
 insert into t2 values (@v);
-show binlog events from 95;
+show binlog events from 96;
 # more important than SHOW BINLOG EVENTS, mysqlbinlog (where we
 # absolutely need variables names to be quoted and strings to be
 # escaped).

mysql-test/t/func_group.test

@@ -58,6 +58,11 @@ create table t2 (id int not null,rating int null);
 insert into t1 values(1),(2),(3);
 insert into t2 values(1, 3),(2, NULL),(2, NULL),(3, 2),(3, NULL);
 select t1.id, avg(rating) from t1 left join t2 on ( t1.id = t2.id ) group by t1.id;
+# Test different types with avg()
+select sql_small_result t2.id, avg(rating) from t2 group by t2.id;
+select sql_big_result t2.id, avg(rating) from t2 group by t2.id;
+select sql_small_result t2.id, avg(rating+0.0e0) from t2 group by t2.id;
+select sql_big_result t2.id, avg(rating+0.0e0) from t2 group by t2.id;
 drop table t1,t2;
 
 #

mysql-test/t/func_set.test

@@ -18,6 +18,8 @@ select export_set(9,"Y","N","-",5),export_set(9,"Y","N"),export_set(9,"Y","N",""
 # Wrong usage of functions
 #
 select elt(2,1),field(NULL,"a","b","c");
+select field("b","a",NULL),field(1,0,NULL)+0,field(1.0,0.0,NULL)+0.0,field(1.0e1,0.0e1,NULL)+0.0e1;
+select field(NULL,"a",NULL),field(NULL,0,NULL)+0,field(NULL,0.0,NULL)+0.0,field(NULL,0.0e1,NULL)+0.0e1;
 select find_in_set("","a,b,c"),find_in_set("","a,b,c,"),find_in_set("",",a,b,c");
 select find_in_set("abc","abc"),find_in_set("ab","abc"),find_in_set("abcd","abc");
 select interval(null, 1, 10, 100);

mysql-test/t/innodb.test

@@ -139,7 +139,7 @@ select n from t1;
 rollback to savepoint `savept2`;
 release savepoint `my_savepoint`;
 select n from t1;
--- error 1181
+-- error 1305
 rollback to savepoint `my_savepoint`;
 set autocommit=1;
 # nop

mysql-test/t/mix_innodb_myisam_binlog.test

@@ -26,7 +26,8 @@ insert into t2 select * from t1;
 commit;
 
 --replace_column 5 #
-show binlog events from 95;
+--replace_result "xid=12" "xid=7"
+show binlog events from 96;
 
 delete from t1;
 delete from t2;
@@ -39,7 +40,7 @@ insert into t2 select * from t1;
 rollback;
 
 --replace_column 5 #
-show binlog events from 95;
+show binlog events from 96;
 
 delete from t1;
 delete from t2;
@@ -54,7 +55,8 @@ rollback to savepoint my_savepoint;
 commit;
 
 --replace_column 5 #
-show binlog events from 95;
+--replace_result "xid=45" "xid=24"
+show binlog events from 96;
 
 delete from t1;
 delete from t2;
@@ -71,7 +73,8 @@ commit;
 select a from t1 order by a; # check that savepoints work :)
 
 --replace_column 5 #
-show binlog events from 95;
+--replace_result "xid=67" "xid=36"
+show binlog events from 96;
 
 # and when ROLLBACK is not explicit?
 delete from t1;
@@ -92,7 +95,7 @@ connection con2;
 # logging has been done, we use a user lock.
 select get_lock("a",10);
 --replace_column 5 #
-show binlog events from 95;
+show binlog events from 96;
 
 # and when not in a transact1on?
 delete from t1;
@@ -103,7 +106,8 @@ insert into t1 values(9);
 insert into t2 select * from t1;
 
 --replace_column 5 #
-show binlog events from 95;
+--replace_result "xid=116" "xid=59"
+show binlog events from 96;
 
 # Check that when the query updat1ng the MyISAM table is the first in the
 # transaction, we log it immediately.
@@ -115,12 +119,14 @@ insert into t1 values(10); # first make t1 non-empty
 begin;
 insert into t2 select * from t1;
 --replace_column 5 #
-show binlog events from 95;
+--replace_result "xid=130" "xid=65"
+show binlog events from 96;
 insert into t1 values(11);
 commit;
 
 --replace_column 5 #
-show binlog events from 95;
+--replace_result "xid=130" "xid=65" "xid=133" "xid=67"
+show binlog events from 96;
 
 
 # Check that things work like before this BEGIN/ROLLBACK code was added,
@@ -138,7 +144,8 @@ insert into t2 select * from t1;
 commit;
 
 --replace_column 5 #
-show binlog events from 95;
+--replace_result "xid=152" "xid=77"
+show binlog events from 96;
 
 delete from t1;
 delete from t2;
@@ -150,7 +157,7 @@ insert into t2 select * from t1;
 rollback;
 
 --replace_column 5 #
-show binlog events from 95;
+show binlog events from 96;
 
 delete from t1;
 delete from t2;
@@ -165,7 +172,8 @@ rollback to savepoint my_savepoint;
 commit;
 
 --replace_column 5 #
-show binlog events from 95;
+--replace_result "xid=184" "xid=93"
+show binlog events from 96;
 
 delete from t1;
 delete from t2;
@@ -182,7 +190,8 @@ commit;
 select a from t1 order by a; # check that savepoints work :)
 
 --replace_column 5 #
-show binlog events from 95;
+--replace_result "xid=205" "xid=104"
+show binlog events from 96;
 
 # Test for BUG#5714, where a MyISAM update in the transaction used to
 # release row-level locks in InnoDB

mysql-test/t/mysqlbinlog.test

@@ -61,7 +61,7 @@ select "--- --database --" as "";
 select "--- --position --" as "";
 --enable_query_log
 --replace_result $MYSQL_TEST_DIR MYSQL_TEST_DIR
---exec $MYSQL_BINLOG --short-form --local-load=$MYSQL_TEST_DIR/var/tmp/ --position=118 $MYSQL_TEST_DIR/var/log/master-bin.000002
+--exec $MYSQL_BINLOG --short-form --local-load=$MYSQL_TEST_DIR/var/tmp/ --position=119 $MYSQL_TEST_DIR/var/log/master-bin.000002
 
 # These are tests for remote binlog.
 # They should return the same as previous test.
@@ -93,7 +93,7 @@ select "--- --database --" as "";
 select "--- --position --" as "";
 --enable_query_log
 --replace_result $MYSQL_TEST_DIR MYSQL_TEST_DIR
---exec $MYSQL_BINLOG --short-form --local-load=$MYSQL_TEST_DIR/var/tmp/ --read-from-remote-server --position=118 --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000002
+--exec $MYSQL_BINLOG --short-form --local-load=$MYSQL_TEST_DIR/var/tmp/ --read-from-remote-server --position=119 --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000002
 
 # Bug#7853 (mysqlbinlog does not accept input from stdin)
 --disable_query_log
@@ -107,3 +107,4 @@ select "--- reading stdin --" as "";
 
 # clean up
 drop table t1, t2;
+

mysql-test/t/mysqlbinlog2.test

@@ -46,11 +46,11 @@ select "--- offset --" as "";
 --disable_query_log
 select "--- start-position --" as "";
 --enable_query_log
---exec $MYSQL_BINLOG --short-form --start-position=601 $MYSQL_TEST_DIR/var/log/master-bin.000001 
+--exec $MYSQL_BINLOG --short-form --start-position=602 $MYSQL_TEST_DIR/var/log/master-bin.000001 
 --disable_query_log
 select "--- stop-position --" as "";
 --enable_query_log
---exec $MYSQL_BINLOG --short-form --stop-position=601 $MYSQL_TEST_DIR/var/log/master-bin.000001 
+--exec $MYSQL_BINLOG --short-form --stop-position=602 $MYSQL_TEST_DIR/var/log/master-bin.000001 
 --disable_query_log
 select "--- start-datetime --" as "";
 --enable_query_log
@@ -75,11 +75,11 @@ select "--- offset --" as "";
 --disable_query_log
 select "--- start-position --" as "";
 --enable_query_log
---exec $MYSQL_BINLOG --short-form --start-position=601 $MYSQL_TEST_DIR/var/log/master-bin.000001 $MYSQL_TEST_DIR/var/log/master-bin.000002
+--exec $MYSQL_BINLOG --short-form --start-position=602 $MYSQL_TEST_DIR/var/log/master-bin.000001 $MYSQL_TEST_DIR/var/log/master-bin.000002
 --disable_query_log
 select "--- stop-position --" as "";
 --enable_query_log
---exec $MYSQL_BINLOG --short-form --stop-position=123 $MYSQL_TEST_DIR/var/log/master-bin.000001 $MYSQL_TEST_DIR/var/log/master-bin.000002
+--exec $MYSQL_BINLOG --short-form --stop-position=124 $MYSQL_TEST_DIR/var/log/master-bin.000001 $MYSQL_TEST_DIR/var/log/master-bin.000002
 --disable_query_log
 select "--- start-datetime --" as "";
 --enable_query_log
@@ -102,11 +102,11 @@ select "--- offset --" as "";
 --disable_query_log
 select "--- start-position --" as "";
 --enable_query_log
---exec $MYSQL_BINLOG --short-form --start-position=601 --read-from-remote-server --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000001 
+--exec $MYSQL_BINLOG --short-form --start-position=602 --read-from-remote-server --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000001 
 --disable_query_log
 select "--- stop-position --" as "";
 --enable_query_log
---exec $MYSQL_BINLOG --short-form --stop-position=601 --read-from-remote-server --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000001 
+--exec $MYSQL_BINLOG --short-form --stop-position=602 --read-from-remote-server --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000001 
 --disable_query_log
 select "--- start-datetime --" as "";
 --enable_query_log
@@ -129,11 +129,11 @@ select "--- offset --" as "";
 --disable_query_log
 select "--- start-position --" as "";
 --enable_query_log
---exec $MYSQL_BINLOG --short-form --start-position=601 --read-from-remote-server --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000001  master-bin.000002
+--exec $MYSQL_BINLOG --short-form --start-position=602 --read-from-remote-server --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000001  master-bin.000002
 --disable_query_log
 select "--- stop-position --" as "";
 --enable_query_log
---exec $MYSQL_BINLOG --short-form --stop-position=123 --read-from-remote-server --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000001  master-bin.000002
+--exec $MYSQL_BINLOG --short-form --stop-position=124 --read-from-remote-server --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000001  master-bin.000002
 --disable_query_log
 select "--- start-datetime --" as "";
 --enable_query_log

mysql-test/t/ndb_autodiscover.test

@@ -209,8 +209,30 @@ select * from t4;
 select * from t4;
 
 show status like 'handler_discover%';
+--error 1051
 drop table t4;
 
+create table t4(
+  id int not null primary key,
+  name char(27)
+) engine=ndb;
+insert into t4 values (1, "Automatic");
+select * from t4;
+
+# Remove the table from NDB
+system exec $NDB_TOOLS_DIR/ndb_drop_table --no-defaults -d test t4 >> $NDB_TOOLS_OUTPUT ; 
+
+--error 1146
+select * from t4;
+
+drop table if exists t4;
+
+# Test that dropping a table that does not exists
+# on  disk or in NDB gives same result as above
+--error 1051
+drop table t5;
+drop table if exists t5;
+
 
 #######################################################
 # Test that a table that has been dropped from NDB

mysql-test/t/ndb_cache2.test

@@ -10,7 +10,7 @@ drop table if exists t1;
 set GLOBAL query_cache_type=on;
 set GLOBAL query_cache_size=1355776;
 # Turn on thread that will fetch commit count for open tables
-set GLOBAL ndb_cache_check_time=5;
+set GLOBAL ndb_cache_check_time=1;
 reset query cache;
 flush status;
 

mysql-test/t/ndb_cache_multi2.test

@@ -68,4 +68,14 @@ show status like "Qcache_hits";
 
 drop table t1, t2;
 
-
+# Turn off and reset query cache on server1 and server2
+connection server1;
+set GLOBAL query_cache_size=0;
+set GLOBAL ndb_cache_check_time=0;
+reset query cache;
+flush status;
+connection server2;
+set GLOBAL query_cache_size=0;
+set GLOBAL ndb_cache_check_time=0;
+reset query cache;
+flush status;

mysql-test/t/rpl_charset.test

@@ -107,7 +107,7 @@ connection master;
 drop database mysqltest2;
 drop database mysqltest3;
 --replace_column 2 # 5 #
-show binlog events from 95;
+show binlog events from 96;
 sync_slave_with_master;
 
 # Check that we can change global.collation_server (since 5.0.3)
@@ -156,3 +156,4 @@ connection master;
 --exec $MYSQL_BINLOG --short-form $MYSQL_TEST_DIR/var/log/master-bin.000001 
 drop table t1;
 sync_slave_with_master;
+

mysql-test/t/rpl_error_ignored_table.test

@@ -48,7 +48,7 @@ connection master;
 --error 0,1053;
 reap;
 connection master1;
-show binlog events from 95;
+show binlog events from 96;
 save_master_pos;
 connection slave;
 # SQL slave thread should not have stopped (because table of the killed

mysql-test/t/rpl_loaddata_rule_m.test

@@ -19,5 +19,5 @@ create database mysqltest;
 create table t1(a int, b int, unique(b));
 use mysqltest;
 load data infile '../../std_data/rpl_loaddata.dat' into table test.t1;
-show binlog events from 95; # should be nothing
+show binlog events from 96; # should be nothing
 drop database mysqltest;

mysql-test/t/rpl_loaddata_rule_s.test

@@ -17,4 +17,4 @@ save_master_pos;
 connection slave;
 sync_with_master;
 select count(*) from t1; # check that LOAD was replicated
-show binlog events from 95; # should be nothing
+show binlog events from 96; # should be nothing

mysql-test/t/rpl_log.test

@@ -38,9 +38,9 @@ select count(*) from t1;
 drop table t1;
 --replace_result $VERSION VERSION
 show binlog events;
-show binlog events from 95 limit 1;
-show binlog events from 95 limit 2;
-show binlog events from 95 limit 2,1;
+show binlog events from 96 limit 1;
+show binlog events from 96 limit 2;
+show binlog events from 96 limit 2,1;
 flush logs;
 
 # We need an extra update before doing save_master_pos.

mysql-test/t/rpl_log_pos.test

@@ -38,7 +38,7 @@ insert into t1 values (1),(2),(3);
 save_master_pos;
 connection slave;
 stop slave;
-change master to master_log_pos=95;
+change master to master_log_pos=96;
 start slave;
 sync_with_master;
 select * from t1;

mysql-test/t/rpl_multi_query.test

@@ -24,6 +24,6 @@ sync_slave_with_master;
 select * from mysqltest.t1;
 connection master;
 --replace_column 2 # 5 #
-show binlog events from 95;
+show binlog events from 96;
 drop database mysqltest;
 sync_slave_with_master;

mysql-test/t/rpl_trunc_binlog.test

 # We are testing if a binlog which contains BEGIN but not COMMIT (the
-# master did while writing the transaction to the binlog) triggers an
-# error on slave.  So we use such a truncated binlog and simulate that
+# master died while writing the transaction to the binlog) triggers a
+# rollback on slave.  So we use such a truncated binlog and simulate that
 # the master restarted after this.
 
 source include/master-slave.inc;
 
 connection slave;
-# If we are not supporting transactions in the slave, the unfinished transaction
-# won't cause any error, so we need to skip the test. In the 4.0 testsuite, the
-# slave always runs without InnoDB, so we check for BDB.
+# If we are not supporting transactions in the slave, the unfinished
+# transaction won't cause any error, so we need to skip the test. In the 4.0
+# testsuite, the slave always runs without InnoDB, so we check for BDB.
 source include/have_bdb.inc;
 stop slave;
+
 connection master;
 flush logs;
 system mv -f var/log/master-bin.000001 var/log/master-bin.000002;
 system cp std_data/trunc_binlog.000001 var/log/master-bin.000001;
+
 connection slave;
+
+# truncated binlog contains: BEGIN; INSERT t1 VALUES (1);
+# so let's create the table t1 on slave
+
+create table t1 (a int) engine=bdb;
 reset slave;
 start slave;
 # can't sync_with_master so we must sleep
@@ -23,3 +30,6 @@ sleep 3;
 --replace_result $MASTER_MYPORT MASTER_PORT
 --replace_column 1 # 8 # 9 # 23 # 33 #
 show slave status;
+select * from t1;
+drop table t1;
+

mysql-test/t/rpl_user_variables.test

@@ -46,7 +46,7 @@ save_master_pos;
 connection slave;
 sync_with_master;
 select * from t1;
-show binlog events from 95;
+show binlog events from 96;
 connection master;
 drop table t1;
 save_master_pos;

mysql-test/t/sp.test

@@ -2536,6 +2536,115 @@ end|
 call bug8540()|
 drop procedure bug8540|
 
+#
+# BUG#6642: Stored procedure crash if expression with set function
+#
+--disable_warnings
+drop table if exists t3|
+--enable_warnings
+create table t3 (s1 int)|
+
+--disable_warnings
+drop procedure if exists bug6642|
+--enable_warnings
+
+create procedure bug6642()
+  select abs(count(s1)) from t3|
+
+call bug6642()|
+call bug6642()|
+drop procedure bug6642|
+
+#
+# BUG#7013: Stored procedure crash if group by ... with rollup
+#
+insert into t3 values (0),(1)|
+--disable_warnings
+drop procedure if exists bug7013|
+--enable_warnings
+create procedure bug7013()
+  select s1,count(s1) from t3 group by s1 with rollup|
+call bug7013()|
+call bug7013()|
+drop procedure bug7013|
+
+#
+# BUG#7743: 'Lost connection to MySQL server during query' on Stored Procedure
+#
+--disable_warnings
+drop table if exists t4;
+--enable_warnings
+create table t4 (
+  a mediumint(8) unsigned not null auto_increment,
+  b smallint(5) unsigned not null,
+  c char(32) not null,
+  primary key  (a)
+) engine=myisam default charset=latin1|
+insert into t4 values (1, 2, 'oneword')|
+insert into t4 values (2, 2, 'anotherword')|
+
+--disable_warnings
+drop procedure if exists bug7743|
+--enable_warnings
+create procedure bug7743 ( searchstring char(28) )
+begin
+  declare var mediumint(8) unsigned;
+  select a into var from t4 where b = 2 and c = binary searchstring limit 1;
+  select var;
+end|
+
+call bug7743("oneword")|
+call bug7743("OneWord")|
+call bug7743("anotherword")|
+call bug7743("AnotherWord")|
+drop procedure bug7743|
+drop table t4|
+
+#
+# BUG#7992: SELECT .. INTO variable .. within Stored Procedure crashes
+#           the server
+#
+delete from t3|
+insert into t3 values(1)|
+drop procedure if exists bug7992_1|
+drop procedure if exists bug7992_2|
+create procedure bug7992_1()
+begin
+  declare i int;
+  select max(s1)+1 into i from t3;
+end|
+create procedure bug7992_2()
+  insert into t3 (s1) select max(t4.s1)+1 from t3 as t4|
+
+call bug7992_1()|
+call bug7992_1()|
+call bug7992_2()|
+call bug7992_2()|
+
+drop procedure bug7992_1|
+drop procedure bug7992_2|
+drop table t3|
+
+#
+# BUG#8116: calling simple stored procedure twice in a row results
+#           in server crash
+#
+--disable_warnings
+drop table if exists t3|
+--enable_warnings
+create table t3 (  userid bigint(20) not null default 0 )|
+
+--disable_warnings
+drop procedure if exists bug8116|
+--enable_warnings
+create procedure bug8116(in _userid int)
+   select * from t3 where userid = _userid|
+
+call bug8116(42)|
+call bug8116(42)|
+drop procedure bug8116|
+drop table t3|
+
 
 #
 # Some "real" examples

mysql-test/t/strict.test

@@ -866,12 +866,12 @@ DROP TABLE t1;
 
 CREATE TABLE t1 (col1 CHAR(5), col2 VARCHAR(6));
 INSERT INTO t1 VALUES ('hello', 'hello'),('he', 'he'),('hello   ', 'hello ');
---error 1400
+--error 1406
 INSERT INTO t1 (col1) VALUES ('hellobob');
 --error 1265
 INSERT INTO t1 (col2) VALUES ('hellobob');
 INSERT INTO t1 (col2) VALUES ('hello  ');
---error 1400
+--error 1406
 UPDATE t1 SET col1 ='hellobob' WHERE col1 ='he';
 --error 1265
 UPDATE t1 SET col2 ='hellobob' WHERE col2 ='he';

mysql-test/t/type_decimal.test

@@ -165,6 +165,8 @@ insert into t1 values ("00000000000001"),("+0000000000001"),("-0000000000001");
 insert into t1 values ("+111111111.11"),("111111111.11"),("-11111111.11");
 insert into t1 values ("-111111111.11"),("+1111111111.11"),("1111111111.11");
 insert into t1 values ("1e+1000"),("1e-1000"),("-1e+1000");
+insert into t1 values ("1e+4294967296"),("1e-4294967296");
+insert into t1 values ("1e+18446744073709551615"),("1e+18446744073709551616"),("1e-9223372036854775807"),("1e-9223372036854775809");
 insert into t1 values ("123.4e"),("123.4e+2"),("123.4e-2"),("123e1"),("123e+0");
 select * from t1;
 drop  table t1;
@@ -201,6 +203,7 @@ insert into t1 values (+111111111.11),(111111111.11),(-11111111.11);
 insert into t1 values (-111111111.11),(+1111111111.11),(1111111111.11);
 insert into t1 values (1e+100),(1e-100),(-1e+100);
 insert into t1 values (123.4e0),(123.4e+2),(123.4e-2),(123e1),(123e+0);
+insert into t1 values (MID("987",1,2)),("987 "),("987.6e+2 ");
 select * from t1;
 drop  table t1;
 

mysql-test/t/user_var.test

@@ -110,7 +110,7 @@ INSERT INTO t1 VALUES(@`a b`);
 set @var1= "';aaa";
 SET @var2=char(ascii('a'));
 insert into t1 values (@var1),(@var2);
-show binlog events from 95;
+show binlog events from 96;
 # more important than SHOW BINLOG EVENTS, mysqlbinlog (where we
 # absolutely need variables names to be quoted and strings to be
 # escaped).

mysys/charset-def.c

@@ -22,6 +22,8 @@
   init_compiled_charsets() that only adds those that he wants
 */
 
+#ifdef HAVE_UCA_COLLATIONS
+
 #ifdef HAVE_CHARSET_ucs2
 extern CHARSET_INFO my_charset_ucs2_general_uca;
 extern CHARSET_INFO my_charset_ucs2_icelandic_uca_ci;
@@ -62,6 +64,8 @@ extern CHARSET_INFO my_charset_utf8_roman_uca_ci;
 extern CHARSET_INFO my_charset_utf8_persian_uca_ci;
 #endif
 
+#endif /* HAVE_UCA_COLLATIONS */
+
 my_bool init_compiled_charsets(myf flags __attribute__((unused)))
 {
   CHARSET_INFO *cs;
@@ -123,6 +127,7 @@ my_bool init_compiled_charsets(myf flags __attribute__((unused)))
 #ifdef HAVE_CHARSET_ucs2
   add_compiled_collation(&my_charset_ucs2_general_ci);
   add_compiled_collation(&my_charset_ucs2_bin);
+#ifdef HAVE_UCA_COLLATIONS
   add_compiled_collation(&my_charset_ucs2_general_uca);
   add_compiled_collation(&my_charset_ucs2_icelandic_uca_ci);
   add_compiled_collation(&my_charset_ucs2_latvian_uca_ci);
@@ -141,6 +146,7 @@ my_bool init_compiled_charsets(myf flags __attribute__((unused)))
   add_compiled_collation(&my_charset_ucs2_roman_uca_ci);
   add_compiled_collation(&my_charset_ucs2_persian_uca_ci);
 #endif
+#endif
 
 #ifdef HAVE_CHARSET_ujis
   add_compiled_collation(&my_charset_ujis_japanese_ci);
@@ -150,6 +156,7 @@ my_bool init_compiled_charsets(myf flags __attribute__((unused)))
 #ifdef HAVE_CHARSET_utf8
   add_compiled_collation(&my_charset_utf8_general_ci);
   add_compiled_collation(&my_charset_utf8_bin);
+#ifdef HAVE_UCA_COLLATIONS
   add_compiled_collation(&my_charset_utf8_general_uca_ci);
   add_compiled_collation(&my_charset_utf8_icelandic_uca_ci);
   add_compiled_collation(&my_charset_utf8_latvian_uca_ci);
@@ -167,6 +174,7 @@ my_bool init_compiled_charsets(myf flags __attribute__((unused)))
   add_compiled_collation(&my_charset_utf8_spanish2_uca_ci);
   add_compiled_collation(&my_charset_utf8_roman_uca_ci);
   add_compiled_collation(&my_charset_utf8_persian_uca_ci);
+#endif
 #endif
 
   /* Copy compiled charsets */

mysys/charset.c

@@ -215,7 +215,7 @@ static int add_collation(CHARSET_INFO *cs)
 
       if (!strcmp(cs->csname,"ucs2") )
       {
-#ifdef HAVE_CHARSET_ucs2
+#if defined(HAVE_CHARSET_ucs2) && defined(HAVE_UCA_COLLATIONS)
         new->cset= my_charset_ucs2_general_uca.cset;
         new->coll= my_charset_ucs2_general_uca.coll;
         new->strxfrm_multiply= my_charset_ucs2_general_uca.strxfrm_multiply;

mysys/hash.c

@@ -103,7 +103,7 @@ static inline void hash_free_elements(HASH *hash)
     hash_free()
     hash   the hash to delete elements of
 
-  NOTES: Hash can't be reused wuthing calling hash_init again.
+  NOTES: Hash can't be reused without calling hash_init again.
 */
 
 void hash_free(HASH *hash)

mysys/my_mmap.c

@@ -16,7 +16,7 @@
 
 #include "mysys_priv.h"
 
-#ifdef HAVE_MMAP
+#ifdef HAVE_SYS_MMAN_H
 
 /*
   system msync() only syncs mmap'ed area to fs cache.
@@ -84,6 +84,6 @@ int my_msync(int fd, void *addr, size_t len, int flags)
 }
 
 #endif
-#error "no mmap!"
+#warning "no mmap!"
 #endif
 

ndb/include/util/NdbSqlUtil.hpp

@@ -45,9 +45,9 @@ public:
   typedef int Cmp(const void* info, const void* p1, unsigned n1, const void* p2, unsigned n2, bool full);
 
   /**
-   * Prototype for "like" comparison.  Defined for the 3 char string
-   * types.  Second argument must have same type-specific format.
-   * Returns >0 on match, 0 on no match, <0 on bad data.
+   * Prototype for "like" comparison.  Defined for string types.  Second
+   * argument must have same type-specific format.  Returns 0 on match,
+   * +1 on no match, and -1 on bad data.
    *
    * Uses default special chars ( \ % _ ).
    *

ndb/include/util/ndb_opts.h

@@ -25,10 +25,15 @@
 #include <ndb_opt_defaults.h>
 
 #define NDB_STD_OPTS_VARS \
-const char *opt_connect_str= 0;\
 my_bool	opt_ndb_optimized_node_selection
 
+int opt_ndb_nodeid;
 my_bool opt_ndb_shm;
+const char *opt_ndb_connectstring= 0;
+const char *opt_connect_str= 0;
+const char *opt_ndb_mgmd= 0;
+char opt_ndb_constrbuf[1024];
+unsigned opt_ndb_constrbuf_len;
 
 #define OPT_NDB_CONNECTSTRING 'c'
 
@@ -43,8 +48,17 @@ my_bool opt_ndb_shm;
     "Set connect string for connecting to ndb_mgmd. " \
     "Syntax: \"[nodeid=<id>;][host=]<hostname>[:<port>]\". " \
     "Overides specifying entries in NDB_CONNECTSTRING and Ndb.cfg", \
-    (gptr*) &opt_connect_str, (gptr*) &opt_connect_str, 0, \
+    (gptr*) &opt_ndb_connectstring, (gptr*) &opt_ndb_connectstring, \
+    0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0 },\
+  { "ndb-mgmd-host", OPT_NDB_MGMD, \
+    "Set host and port for connecting to ndb_mgmd. " \
+    "Syntax: <hostname>[:<port>].", \
+    (gptr*) &opt_ndb_mgmd, (gptr*) &opt_ndb_mgmd, 0, \
     GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0 },\
+  { "ndb-nodeid", OPT_NDB_NODEID, \
+    "Set node id for this node.", \
+    (gptr*) &opt_ndb_nodeid, (gptr*) &opt_ndb_nodeid, 0, \
+    GET_INT, REQUIRED_ARG, 0, 0, 0, 0, 0, 0 },\
   { "ndb-shm", OPT_NDB_SHM,\
     "Allow optimizing using shared memory connections when available",\
     (gptr*) &opt_ndb_shm, (gptr*) &opt_ndb_shm, 0,\
@@ -55,8 +69,8 @@ my_bool opt_ndb_shm;
     (gptr*) &opt_ndb_optimized_node_selection, 0,\
     GET_BOOL, OPT_ARG, 1, 0, 0, 0, 0, 0},\
   { "connect-string", OPT_NDB_CONNECTSTRING, "same as --ndb-connectstring",\
-    (gptr*) &opt_connect_str, (gptr*) &opt_connect_str, 0,\
-    GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0 }
+    (gptr*) &opt_ndb_connectstring, (gptr*) &opt_ndb_connectstring, \
+    0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0 }
 
 #ifndef DBUG_OFF
 #define NDB_STD_OPTS(prog_name) \
@@ -79,6 +93,8 @@ enum ndb_std_options {
   OPT_NDB_SHM= 256,
   OPT_NDB_SHM_SIGNUM,
   OPT_NDB_OPTIMIZED_NODE_SELECTION,
+  OPT_NDB_MGMD,
+  OPT_NDB_NODEID,
   NDB_STD_OPTIONS_LAST /* should always be last in this enum */
 };
 
@@ -110,6 +126,29 @@ ndb_std_get_one_option(int optid,
 #endif
     }
     break;
+  case OPT_NDB_MGMD:
+  case OPT_NDB_NODEID:
+  {
+    int len= my_snprintf(opt_ndb_constrbuf+opt_ndb_constrbuf_len,
+			 sizeof(opt_ndb_constrbuf)-opt_ndb_constrbuf_len,
+			 "%s%s%s",opt_ndb_constrbuf_len > 0 ? ",":"",
+			 optid == OPT_NDB_NODEID ? "nodeid=" : "",
+			 argument);
+    opt_ndb_constrbuf_len+= len;
+  }
+  /* fall through to add the connectstring to the end
+   * and set opt_ndbcluster_connectstring
+   */
+  case OPT_NDB_CONNECTSTRING:
+    if (opt_ndb_connectstring && opt_ndb_connectstring[0])
+      my_snprintf(opt_ndb_constrbuf+opt_ndb_constrbuf_len,
+		  sizeof(opt_ndb_constrbuf)-opt_ndb_constrbuf_len,
+		  "%s%s", opt_ndb_constrbuf_len > 0 ? ",":"",
+		  opt_ndb_connectstring);
+    else
+      opt_ndb_constrbuf[opt_ndb_constrbuf_len]= 0;
+    opt_connect_str= opt_ndb_constrbuf;
+    break;
   }
   return 0;
 }

ndb/src/common/util/NdbSqlUtil.cpp

@@ -795,14 +795,18 @@ NdbSqlUtil::cmpTimestamp(const void* info, const void* p1, unsigned n1, const vo
 
 // like
 
+static const int ndb_wild_prefix = '\\';
+static const int ndb_wild_one = '_';
+static const int ndb_wild_many = '%';
+
 int
 NdbSqlUtil::likeChar(const void* info, const void* p1, unsigned n1, const void* p2, unsigned n2)
 {
   const char* v1 = (const char*)p1;
   const char* v2 = (const char*)p2;
   CHARSET_INFO* cs = (CHARSET_INFO*)(info);
-  int k = (cs->coll->wildcmp)(cs, v1, v1 + n1, v2, v2 + n2, wild_prefix, wild_one, wild_many);
-  return k;
+  int k = (cs->coll->wildcmp)(cs, v1, v1 + n1, v2, v2 + n2, ndb_wild_prefix, ndb_wild_one, ndb_wild_many);
+  return k == 0 ? 0 : +1;
 }
 
 int
@@ -825,8 +829,8 @@ NdbSqlUtil::likeVarchar(const void* info, const void* p1, unsigned n1, const voi
       const char* w1 = (const char*)v1 + lb;
       const char* w2 = (const char*)v2 + lb;
       CHARSET_INFO* cs = (CHARSET_INFO*)(info);
-      int k = (cs->coll->wildcmp)(cs, w1, w1 + m1, w2, w2 + m2, wild_prefix, wild_one, wild_many);
-      return k;
+      int k = (cs->coll->wildcmp)(cs, w1, w1 + m1, w2, w2 + m2, ndb_wild_prefix, ndb_wild_one, ndb_wild_many);
+      return k == 0 ? 0 : +1;
     }
   }
   return -1;
@@ -852,8 +856,8 @@ NdbSqlUtil::likeLongvarchar(const void* info, const void* p1, unsigned n1, const
       const char* w1 = (const char*)v1 + lb;
       const char* w2 = (const char*)v2 + lb;
       CHARSET_INFO* cs = (CHARSET_INFO*)(info);
-      int k = (cs->coll->wildcmp)(cs, w1, w1 + m1, w2, w2 + m2, wild_prefix, wild_one, wild_many);
-      return k;
+      int k = (cs->coll->wildcmp)(cs, w1, w1 + m1, w2, w2 + m2, ndb_wild_prefix, ndb_wild_one, ndb_wild_many);
+      return k == 0 ? 0 : +1;
     }
   }
   return -1;

ndb/src/kernel/blocks/dbtup/DbtupExecQuery.cpp

@@ -1861,56 +1861,57 @@ int Dbtup::interpreterNextLab(Signal* signal,
 
 	bool r1_null = ah.isNULL();
 	bool r2_null = argLen == 0;
-	int res;
+	int res1;
         if (cond != Interpreter::LIKE &&
             cond != Interpreter::NOT_LIKE) {
           if (r1_null || r2_null) {
             // NULL==NULL and NULL<not-NULL
-            res = r1_null && r2_null ? 0 : r1_null ? -1 : 1;
+            res1 = r1_null && r2_null ? 0 : r1_null ? -1 : 1;
           } else {
-            res = (*sqlType.m_cmp)(cs, s1, attrLen, s2, argLen, true);
+            res1 = (*sqlType.m_cmp)(cs, s1, attrLen, s2, argLen, true);
           }
 	} else {
           if (r1_null || r2_null) {
             // NULL like NULL is true (has no practical use)
-            res =  r1_null && r2_null ? 0 : -1;
+            res1 =  r1_null && r2_null ? 0 : -1;
           } else {
-            res = (*sqlType.m_like)(cs, s1, attrLen, s2, argLen);
+            res1 = (*sqlType.m_like)(cs, s1, attrLen, s2, argLen);
           }
         }
 
+        int res = 0;
         switch ((Interpreter::BinaryCondition)cond) {
         case Interpreter::EQ:
-          res = (res == 0);
+          res = (res1 == 0);
           break;
         case Interpreter::NE:
-          res = (res != 0);
+          res = (res1 != 0);
           break;
         // note the condition is backwards
         case Interpreter::LT:
-          res = (res > 0);
+          res = (res1 > 0);
           break;
         case Interpreter::LE:
-          res = (res >= 0);
+          res = (res1 >= 0);
           break;
         case Interpreter::GT:
-          res = (res < 0);
+          res = (res1 < 0);
           break;
         case Interpreter::GE:
-          res = (res <= 0);
+          res = (res1 <= 0);
           break;
         case Interpreter::LIKE:
-          res = (res > 0);
+          res = (res1 == 0);
           break;
         case Interpreter::NOT_LIKE:
-          res = (res == 0);
+          res = (res1 == 1);
           break;
 	  // XXX handle invalid value
         }
 #ifdef TRACE_INTERPRETER
-	ndbout_c("cond=%u diff=%d vc=%d nopad=%d attr(%d) = >%.*s<(%d) str=>%.*s<(%d) -> res = %d",
-		 cond, diff, vchr, nopad,
-		 attrId >> 16, attrLen, s1, attrLen, argLen, s2, argLen, res);
+	ndbout_c("cond=%u attr(%d)='%.*s'(%d) str='%.*s'(%d) res1=%d res=%d",
+		 cond, attrId >> 16,
+                 attrLen, s1, attrLen, argLen, s2, argLen, res1, res);
 #endif
         if (res)
           TprogramCounter = brancher(theInstruction, TprogramCounter);

ndb/src/mgmapi/LocalConfig.cpp

@@ -27,7 +27,9 @@ LocalConfig::LocalConfig(){
 
 bool
 LocalConfig::init(const char *connectString,
-		  const char *fileName) {
+		  const char *fileName)
+{
+  DBUG_ENTER("LocalConfig::init");
   /** 
    * Escalation:
    *  1. Check connectString
@@ -38,21 +40,25 @@ LocalConfig::init(const char *connectString,
    *  6. Check defaultConnectString
    */
   
+  _ownNodeId= 0;
+
   //1. Check connectString
   if(connectString != 0 && connectString[0] != 0){
     if(readConnectString(connectString, "connect string")){
-      return true;
-    }
-    return false;
+      if (ids.size())
+	DBUG_RETURN(true);
+      // only nodeid given, continue to find hosts
+    } else
+      DBUG_RETURN(false);
   }
 
   //2. Check given filename
   if (fileName && strlen(fileName) > 0) {
     bool fopenError;
     if(readFile(fileName, fopenError)){
-      return true;
+      DBUG_RETURN(true);
     }
-    return false;
+    DBUG_RETURN(false);
   }
 
   //3. Check environment variable
@@ -60,9 +66,9 @@ LocalConfig::init(const char *connectString,
   if(NdbEnv_GetEnv("NDB_CONNECTSTRING", buf, sizeof(buf)) &&
      strlen(buf) != 0){
     if(readConnectString(buf, "NDB_CONNECTSTRING")){
-      return true;
+      DBUG_RETURN(true);
     }
-    return false;
+    DBUG_RETURN(false);
   }
   
   //4. Check Ndb.cfg in NDB_HOME
@@ -71,9 +77,9 @@ LocalConfig::init(const char *connectString,
     char *buf= NdbConfig_NdbCfgName(1 /*true*/);
     NdbAutoPtr<char> tmp_aptr(buf);
     if(readFile(buf, fopenError))
-      return true;
+      DBUG_RETURN(true);
     if (!fopenError)
-      return false;
+      DBUG_RETURN(false);
   }
 
   //5. Check Ndb.cfg in cwd
@@ -82,9 +88,9 @@ LocalConfig::init(const char *connectString,
     char *buf= NdbConfig_NdbCfgName(0 /*false*/);
     NdbAutoPtr<char> tmp_aptr(buf);
     if(readFile(buf, fopenError))
-      return true;
+      DBUG_RETURN(true);
     if (!fopenError)
-      return false;
+      DBUG_RETURN(false);
   }
 
   //7. Check
@@ -92,12 +98,12 @@ LocalConfig::init(const char *connectString,
     char buf[256];
     BaseString::snprintf(buf, sizeof(buf), "host=localhost:%s", NDB_PORT);
     if(readConnectString(buf, "default connect string"))
-      return true;
+      DBUG_RETURN(true);
   }
 
   setError(0, "");
 
-  return false;
+  DBUG_RETURN(false);
 }
 
 LocalConfig::~LocalConfig(){
@@ -142,6 +148,7 @@ const char *nodeIdTokens[] = {
 const char *hostNameTokens[] = {
   "host://%[^:]:%i",
   "host=%[^:]:%i",
+  "mgmd=%[^:]:%i",
   "%[^:^=^ ]:%i",
   "%s %i",
   0
@@ -207,30 +214,22 @@ LocalConfig::parseString(const char * connectString, BaseString &err){
   char * copy = strdup(connectString);
   NdbAutoPtr<char> tmp_aptr(copy);
 
-  bool b_nodeId = false;
-  bool found_other = false;
-
   for (char *tok = strtok_r(copy,";,",&for_strtok); tok != 0;
        tok = strtok_r(NULL, ";,", &for_strtok)) {
     if (tok[0] == '#') continue;
 
-    if (!b_nodeId) // only one nodeid definition allowed
-      if (b_nodeId = parseNodeId(tok))
+    if (!_ownNodeId) // only one nodeid definition allowed
+      if (parseNodeId(tok))
 	continue;
-    if (found_other = parseHostName(tok))
+    if (parseHostName(tok))
       continue;
-    if (found_other = parseFileName(tok))
+    if (parseFileName(tok))
       continue;
     
     err.assfmt("Unexpected entry: \"%s\"", tok);
     return false;
   }
 
-  if (!found_other) {
-    err.appfmt("Missing host/file name extry in \"%s\"", connectString);
-    return false;
-  }
-
   return true;
 }
 

ndb/src/mgmapi/mgmapi.cpp

@@ -169,17 +169,18 @@ extern "C"
 int
 ndb_mgm_set_connectstring(NdbMgmHandle handle, const char * mgmsrv)
 {
+  DBUG_ENTER("ndb_mgm_set_connectstring");
   new (&(handle->cfg)) LocalConfig;
   if (!handle->cfg.init(mgmsrv, 0) ||
       handle->cfg.ids.size() == 0)
   {
     new (&(handle->cfg)) LocalConfig;
-    handle->cfg.init(0, 0); /* reset the LocalCongig */
+    handle->cfg.init(0, 0); /* reset the LocalConfig */
     SET_ERROR(handle, NDB_MGM_ILLEGAL_CONNECT_STRING, "");
-    return -1;
+    DBUG_RETURN(-1);
   }
   handle->cfg_i= -1;
-  return 0;
+  DBUG_RETURN(0);
 }
 
 /**
@@ -356,6 +357,7 @@ ndb_mgm_connect(NdbMgmHandle handle, int no_retries,
   SET_ERROR(handle, NDB_MGM_NO_ERROR, "Executing: ndb_mgm_connect");
   CHECK_HANDLE(handle, -1);
 
+  DBUG_ENTER("ndb_mgm_connect");
 #ifdef MGMAPI_LOG
   /**
   * Open the log file
@@ -385,6 +387,13 @@ ndb_mgm_connect(NdbMgmHandle handle, int no_retries,
     }
     if (sockfd != NDB_INVALID_SOCKET)
       break;
+#ifndef DBUG_OFF
+    {
+      char buf[1024];
+      DBUG_PRINT("info",("Unable to connect with connect string: %s",
+			 cfg.makeConnectString(buf,sizeof(buf))));
+    }
+#endif
     if (verbose > 0) {
       char buf[1024];
       ndbout_c("Unable to connect with connect string: %s",
@@ -398,7 +407,7 @@ ndb_mgm_connect(NdbMgmHandle handle, int no_retries,
 	       cfg.makeConnectString(buf,sizeof(buf)));
       if (verbose == -2)
 	ndbout << ", failed." << endl;
-      return -1;
+      DBUG_RETURN(-1);
     }
     if (verbose == -1) {
       ndbout << "Retrying every " << retry_delay_in_seconds << " seconds";
@@ -426,7 +435,7 @@ ndb_mgm_connect(NdbMgmHandle handle, int no_retries,
   handle->socket    = sockfd;
   handle->connected = 1;
 
-  return 0;
+  DBUG_RETURN(0);
 }
 
 /**

scripts/make_binary_distribution.sh

@@ -220,8 +220,10 @@ $CP mysql-test/std_data/*.dat mysql-test/std_data/*.frm \
     mysql-test/std_data/*.pem mysql-test/std_data/Moscow_leap \
     mysql-test/std_data/des_key_file mysql-test/std_data/*.*001 \
     $BASE/mysql-test/std_data
-$CP mysql-test/t/*test mysql-test/t/*.opt mysql-test/t/*.slave-mi mysql-test/t/*.sh $BASE/mysql-test/t
-$CP mysql-test/r/*result mysql-test/r/*result.es mysql-test/r/*.require $BASE/mysql-test/r
+$CP mysql-test/t/*.test mysql-test/t/*.disabled mysql-test/t/*.opt \
+    mysql-test/t/*.slave-mi mysql-test/t/*.sh $BASE/mysql-test/t
+$CP mysql-test/r/*.result mysql-test/r/*.result.es mysql-test/r/*.require \
+    $BASE/mysql-test/r
 
 if [ $BASE_SYSTEM != "netware" ] ; then
   chmod a+x $BASE/bin/*

server-tools/instance-manager/Makefile.am

@@ -25,7 +25,7 @@ DEFS= -DMYSQL_INSTANCE_MANAGER -DMYSQL_SERVER
 
 noinst_LIBRARIES= liboptions.a libnet.a
 
-liboptions_a_CPPFLAGS= $(CPPFLAGS) \
+liboptions_a_CXXFLAGS= $(CXXFLAGS) \
 	-DDEFAULT_PID_FILE_NAME="$(localstatedir)/mysqlmanager.pid" \
 	-DDEFAULT_LOG_FILE_NAME="$(localstatedir)/mysqlmanager.log" \
 	-DDEFAULT_SOCKET_FILE_NAME="$(localstatedir)/mysqlmanager.sock" \

sql/examples/ha_archive.cc

@@ -135,6 +135,23 @@ static HASH archive_open_tables;
 #define DATA_BUFFER_SIZE 2       // Size of the data used in the data file
 #define ARCHIVE_CHECK_HEADER 254 // The number we use to determine corruption
 
+/* dummy handlerton - only to have something to return from archive_db_init */
+static handlerton archive_hton = {
+  0,       /* slot */
+  0,       /* savepoint size. */
+  0,       /* close_connection */
+  0,       /* savepoint */
+  0,       /* rollback to savepoint */
+  0,       /* releas savepoint */
+  0,       /* commit */
+  0,       /* rollback */
+  0,       /* prepare */
+  0,       /* recover */
+  0,       /* commit_by_xid */
+  0        /* rollback_by_xid */
+};
+
+
 /*
   Used for hash table that tracks open tables.
 */
@@ -154,19 +171,20 @@ static byte* archive_get_key(ARCHIVE_SHARE *share,uint *length,
     void
 
   RETURN
-    FALSE       OK
-    TRUE        Error
+    &archive_hton OK
+    0             Error
 */
 
-bool archive_db_init()
+handlerton *archive_db_init()
 {
   archive_inited= 1;
   VOID(pthread_mutex_init(&archive_mutex, MY_MUTEX_INIT_FAST));
-  return (hash_init(&archive_open_tables, system_charset_info, 32, 0, 0,
-                    (hash_get_key) archive_get_key, 0, 0));
+  if (hash_init(&archive_open_tables, system_charset_info, 32, 0, 0,
+                (hash_get_key) archive_get_key, 0, 0))
+    return 0;
+  return &archive_hton;
 }
 
-
 /*
   Release the archive handler.
 
@@ -734,7 +752,7 @@ int ha_archive::rnd_next(byte *buf)
 }
 
 
-/* 
+/*
   Thanks to the table flag HA_REC_NOT_IN_SEQ this will be called after
   each call to ha_archive::rnd_next() if an ordering of the rows is
   needed.
@@ -743,7 +761,7 @@ int ha_archive::rnd_next(byte *buf)
 void ha_archive::position(const byte *record)
 {
   DBUG_ENTER("ha_archive::position");
-  ha_store_ptr(ref, ref_length, current_position);
+  my_store_ptr(ref, ref_length, current_position);
   DBUG_VOID_RETURN;
 }
 
@@ -760,7 +778,7 @@ int ha_archive::rnd_pos(byte * buf, byte *pos)
   DBUG_ENTER("ha_archive::rnd_pos");
   statistic_increment(table->in_use->status_var.ha_read_rnd_next_count,
 		      &LOCK_status);
-  current_position= ha_get_ptr(pos, ref_length);
+  current_position= my_get_ptr(pos, ref_length);
   z_off_t seek= gzseek(archive, current_position, SEEK_SET);
 
   DBUG_RETURN(get_row(archive, buf));

sql/examples/ha_archive.h

@@ -106,6 +106,6 @@ public:
                              enum thr_lock_type lock_type);
 };
 
-bool archive_db_init(void);
+handlerton *archive_db_init(void);
 bool archive_db_end(void);
 

sql/examples/ha_example.cc

@@ -414,7 +414,7 @@ int ha_example::rnd_next(byte *buf)
   position() is called after each call to rnd_next() if the data needs
   to be ordered. You can do something like the following to store
   the position:
-  ha_store_ptr(ref, ref_length, current_position);
+  my_store_ptr(ref, ref_length, current_position);
 
   The server uses ref to store data. ref_length in the above case is
   the size needed to store current_position. ref is just a byte array

sql/examples/ha_tina.cc

@@ -647,7 +647,7 @@ int ha_tina::rnd_next(byte *buf)
   In the case of an order by rows will need to be sorted.
   ::position() is called after each call to ::rnd_next(), 
   the data it stores is to a byte array. You can store this
-  data via ha_store_ptr(). ref_length is a variable defined to the 
+  data via my_store_ptr(). ref_length is a variable defined to the 
   class that is the sizeof() of position being stored. In our case  
   its just a position. Look at the bdb code if you want to see a case 
   where something other then a number is stored.
@@ -655,14 +655,14 @@ int ha_tina::rnd_next(byte *buf)
 void ha_tina::position(const byte *record)
 {
   DBUG_ENTER("ha_tina::position");
-  ha_store_ptr(ref, ref_length, current_position);
+  my_store_ptr(ref, ref_length, current_position);
   DBUG_VOID_RETURN;
 }
 
 
 /* 
   Used to fetch a row from a posiion stored with ::position(). 
-  ha_get_ptr() retrieves the data for you.
+  my_get_ptr() retrieves the data for you.
 */
 
 int ha_tina::rnd_pos(byte * buf, byte *pos)
@@ -670,7 +670,7 @@ int ha_tina::rnd_pos(byte * buf, byte *pos)
   DBUG_ENTER("ha_tina::rnd_pos");
   statistic_increment(table->in_use->status_var.ha_read_rnd_next_count,
 		      &LOCK_status);
-  current_position= ha_get_ptr(pos,ref_length);
+  current_position= my_get_ptr(pos,ref_length);
   DBUG_RETURN(find_current_row(buf));
 }