LOAD DATA INFILE is not replicated if replicate_*_table is set

LOAD DATA LOCAL INFILE was not replicated correctly

VC++Files/bdb/bdb.dsp

@@ -7,19 +7,19 @@
 CFG=bdb - Win32 Max
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "bdb.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "bdb.mak" CFG="bdb - Win32 Max"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "bdb - Win32 Debug" (based on "Win32 (x86) Static Library")
 !MESSAGE "bdb - Win32 Max" (based on "Win32 (x86) Static Library")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -76,7 +76,7 @@ LIB32=link.exe -lib
 # ADD BASE LIB32 /nologo /out:"..\lib_debug\bdb.lib"
 # ADD LIB32 /nologo /out:"..\lib_release\bdb.lib"
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/bdb/build_win32/Berkeley_DB.dsw

@@ -566,4 +566,3 @@ Package=<3>
 }}}
 
 ###############################################################################
-

VC++Files/bdb/build_win32/db_archive.dsp

@@ -7,16 +7,16 @@
 CFG=db_archive - Win32 Debug Static
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "db_archive.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "db_archive.mak" CFG="db_archive - Win32 Debug Static"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "db_archive - Win32 Release" (based on\
  "Win32 (x86) Console Application")
 !MESSAGE "db_archive - Win32 Debug" (based on\
@@ -25,7 +25,7 @@ CFG=db_archive - Win32 Debug Static
  "Win32 (x86) Console Application")
 !MESSAGE "db_archive - Win32 Debug Static" (based on\
  "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP Scc_ProjName ""
@@ -131,7 +131,7 @@ LINK32=link.exe
 # ADD BASE LINK32 Debug_static/libdb32d.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 # ADD LINK32 Debug_static/libdb32sd.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/bdb/build_win32/db_buildall.dsp

@@ -7,23 +7,23 @@
 CFG=db_buildall - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "db_buildall.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "db_buildall.mak" CFG="db_buildall - Win32 Debug Static"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "db_buildall - Win32 Release" (based on "Win32 (x86) External Target")
 !MESSAGE "db_buildall - Win32 Debug" (based on "Win32 (x86) External Target")
 !MESSAGE "db_buildall - Win32 Release Static" (based on\
  "Win32 (x86) External Target")
 !MESSAGE "db_buildall - Win32 Debug Static" (based on\
  "Win32 (x86) External Target")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP Scc_ProjName ""
@@ -105,7 +105,7 @@ CFG=db_buildall - Win32 Debug
 # PROP Bsc_Name "db_buildall.bsc"
 # PROP Target_Dir ""
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 
@@ -122,7 +122,7 @@ CFG=db_buildall - Win32 Debug
 
 !ELSEIF  "$(CFG)" == "db_buildall - Win32 Debug Static"
 
-!ENDIF 
+!ENDIF
 
 # End Target
 # End Project

VC++Files/bdb/build_win32/db_checkpoint.dsp

@@ -7,16 +7,16 @@
 CFG=db_checkpoint - Win32 Debug Static
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "db_checkpoint.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "db_checkpoint.mak" CFG="db_checkpoint - Win32 Debug Static"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "db_checkpoint - Win32 Release" (based on\
  "Win32 (x86) Console Application")
 !MESSAGE "db_checkpoint - Win32 Debug" (based on\
@@ -25,7 +25,7 @@ CFG=db_checkpoint - Win32 Debug Static
  "Win32 (x86) Console Application")
 !MESSAGE "db_checkpoint - Win32 Debug Static" (based on\
  "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP Scc_ProjName ""
@@ -131,7 +131,7 @@ LINK32=link.exe
 # ADD BASE LINK32 Debug_static/libdb32d.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 # ADD LINK32 Debug_static/libdb32sd.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/bdb/build_win32/db_deadlock.dsp

@@ -7,16 +7,16 @@
 CFG=db_deadlock - Win32 Debug Static
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "db_deadlock.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "db_deadlock.mak" CFG="db_deadlock - Win32 Debug Static"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "db_deadlock - Win32 Release" (based on\
  "Win32 (x86) Console Application")
 !MESSAGE "db_deadlock - Win32 Debug" (based on\
@@ -25,7 +25,7 @@ CFG=db_deadlock - Win32 Debug Static
  "Win32 (x86) Console Application")
 !MESSAGE "db_deadlock - Win32 Debug Static" (based on\
  "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP Scc_ProjName ""
@@ -131,7 +131,7 @@ LINK32=link.exe
 # ADD BASE LINK32 Debug_static/libdb32d.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 # ADD LINK32 Debug_static/libdb32sd.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/bdb/build_win32/db_dll.dsp

@@ -7,23 +7,23 @@
 CFG=db_dll - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "db_dll.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "db_dll.mak" CFG="db_dll - Win32 Debug Static"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "db_dll - Win32 Release" (based on "Win32 (x86) Dynamic-Link Library")
 !MESSAGE "db_dll - Win32 Debug" (based on "Win32 (x86) Dynamic-Link Library")
 !MESSAGE "db_dll - Win32 Release Static" (based on\
  "Win32 (x86) Dynamic-Link Library")
 !MESSAGE "db_dll - Win32 Debug Static" (based on\
  "Win32 (x86) Dynamic-Link Library")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP Scc_ProjName ""
@@ -141,7 +141,7 @@ LINK32=link.exe
 # ADD BASE LINK32 /nologo /base:"0x13000000" /subsystem:windows /dll /pdb:none /debug /machine:I386 /out:"Debug/libdb32d.dll" /fixed:no
 # ADD LINK32 /nologo /base:"0x13000000" /subsystem:windows /dll /pdb:none /debug /machine:I386 /out:"Debug/libdb32d.dll" /fixed:no
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/bdb/build_win32/db_dump.dsp

@@ -7,16 +7,16 @@
 CFG=db_dump - Win32 Debug Static
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "db_dump.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "db_dump.mak" CFG="db_dump - Win32 Debug Static"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "db_dump - Win32 Release" (based on\
  "Win32 (x86) Console Application")
 !MESSAGE "db_dump - Win32 Debug" (based on\
@@ -25,7 +25,7 @@ CFG=db_dump - Win32 Debug Static
  "Win32 (x86) Console Application")
 !MESSAGE "db_dump - Win32 Debug Static" (based on\
  "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP Scc_ProjName ""
@@ -131,7 +131,7 @@ LINK32=link.exe
 # ADD BASE LINK32 Debug_static/libdb32d.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 # ADD LINK32 Debug_static/libdb32sd.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/bdb/build_win32/db_java.dsp

@@ -7,20 +7,20 @@
 CFG=db_java - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "db_java.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "db_java.mak" CFG="db_java - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "db_java - Win32 Release" (based on\
  "Win32 (x86) Dynamic-Link Library")
 !MESSAGE "db_java - Win32 Debug" (based on "Win32 (x86) Dynamic-Link Library")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP Scc_ProjName ""
@@ -60,20 +60,20 @@ InputPath=.\Release\libdb_java32.dll
 SOURCE=$(InputPath)
 
 "force_compilation.txt" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-	cd $(ProjDir)\..\java\src\com\sleepycat\db 
-	mkdir ..\..\..\..\classes 
-	echo compiling Berkeley DB classes 
+	cd $(ProjDir)\..\java\src\com\sleepycat\db
+	mkdir ..\..\..\..\classes
+	echo compiling Berkeley DB classes
 	javac -d ../../../../classes -classpath "$(CLASSPATH);../../../../classes"\
-   *.java 
-	echo compiling examples 
-	cd ..\examples 
+   *.java
+	echo compiling examples
+	cd ..\examples
 	javac -d ../../../../classes -classpath "$(CLASSPATH);../../../../classes"\
-    *.java 
-	echo creating jar file 
+    *.java
+	echo creating jar file
 	cd ..\..\..\..\classes
-	jar cf db.jar com\sleepycat\db\*.class 
-	echo Java build finished 
-	
+	jar cf db.jar com\sleepycat\db\*.class
+	echo Java build finished
+
 # End Custom Build
 
 !ELSEIF  "$(CFG)" == "db_java - Win32 Debug"
@@ -108,23 +108,23 @@ InputPath=.\Debug\libdb_java32d.dll
 SOURCE=$(InputPath)
 
 "force_compilation.txt" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-	cd $(ProjDir)\..\java\src\com\sleepycat\db 
-	mkdir ..\..\..\..\classes 
-	echo compiling Berkeley DB classes 
+	cd $(ProjDir)\..\java\src\com\sleepycat\db
+	mkdir ..\..\..\..\classes
+	echo compiling Berkeley DB classes
 	javac -g -d ../../../../classes -classpath "$(CLASSPATH);../../../../classes"\
-   *.java 
-	echo compiling examples 
+   *.java
+	echo compiling examples
 	javac -g -d ../../../../classes -classpath "$(CLASSPATH);../../../../classes"\
-    *.java 
-	cd ..\examples 
-	echo creating jar file 
+    *.java
+	cd ..\examples
+	echo creating jar file
 	cd ..\..\..\..\classes
-	jar cf db.jar com\sleepycat\db\*.class 
-	echo Java build finished 
-	
+	jar cf db.jar com\sleepycat\db\*.class
+	echo Java build finished
+
 # End Custom Build
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/bdb/build_win32/db_load.dsp

@@ -7,16 +7,16 @@
 CFG=db_load - Win32 Debug Static
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "db_load.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "db_load.mak" CFG="db_load - Win32 Debug Static"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "db_load - Win32 Release" (based on\
  "Win32 (x86) Console Application")
 !MESSAGE "db_load - Win32 Debug" (based on\
@@ -25,7 +25,7 @@ CFG=db_load - Win32 Debug Static
  "Win32 (x86) Console Application")
 !MESSAGE "db_load - Win32 Debug Static" (based on\
  "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP Scc_ProjName ""
@@ -131,7 +131,7 @@ LINK32=link.exe
 # ADD BASE LINK32 Debug_static/libdb32d.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 # ADD LINK32 Debug_static/libdb32sd.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/bdb/build_win32/db_printlog.dsp

@@ -7,16 +7,16 @@
 CFG=db_printlog - Win32 Debug Static
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "db_printlog.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "db_printlog.mak" CFG="db_printlog - Win32 Debug Static"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "db_printlog - Win32 Release" (based on\
  "Win32 (x86) Console Application")
 !MESSAGE "db_printlog - Win32 Debug" (based on\
@@ -25,7 +25,7 @@ CFG=db_printlog - Win32 Debug Static
  "Win32 (x86) Console Application")
 !MESSAGE "db_printlog - Win32 Debug Static" (based on\
  "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP Scc_ProjName ""
@@ -131,7 +131,7 @@ LINK32=link.exe
 # ADD BASE LINK32 Debug_static/libdb32d.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 # ADD LINK32 Debug_static/libdb32sd.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/bdb/build_win32/db_recover.dsp

@@ -7,16 +7,16 @@
 CFG=db_recover - Win32 Debug Static
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "db_recover.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "db_recover.mak" CFG="db_recover - Win32 Debug Static"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "db_recover - Win32 Release" (based on\
  "Win32 (x86) Console Application")
 !MESSAGE "db_recover - Win32 Debug" (based on\
@@ -25,7 +25,7 @@ CFG=db_recover - Win32 Debug Static
  "Win32 (x86) Console Application")
 !MESSAGE "db_recover - Win32 Debug Static" (based on\
  "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP Scc_ProjName ""
@@ -131,7 +131,7 @@ LINK32=link.exe
 # ADD BASE LINK32 Debug_static/libdb32d.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 # ADD LINK32 Debug_static/libdb32sd.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/bdb/build_win32/db_stat.dsp

@@ -7,16 +7,16 @@
 CFG=db_stat - Win32 Debug Static
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "db_stat.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "db_stat.mak" CFG="db_stat - Win32 Debug Static"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "db_stat - Win32 Release" (based on\
  "Win32 (x86) Console Application")
 !MESSAGE "db_stat - Win32 Debug" (based on\
@@ -25,7 +25,7 @@ CFG=db_stat - Win32 Debug Static
  "Win32 (x86) Console Application")
 !MESSAGE "db_stat - Win32 Debug Static" (based on\
  "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP Scc_ProjName ""
@@ -131,7 +131,7 @@ LINK32=link.exe
 # ADD BASE LINK32 Debug_static/libdb32d.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 # ADD LINK32 Debug_static/libdb32sd.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/bdb/build_win32/db_static.dsp

@@ -7,23 +7,23 @@
 CFG=db_static - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "db_static.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "db_static.mak" CFG="db_static - Win32 Debug Static"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "db_static - Win32 Release" (based on "Win32 (x86) Static Library")
 !MESSAGE "db_static - Win32 Debug" (based on "Win32 (x86) Static Library")
 !MESSAGE "db_static - Win32 Release Static" (based on\
  "Win32 (x86) Static Library")
 !MESSAGE "db_static - Win32 Debug Static" (based on\
  "Win32 (x86) Static Library")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP Scc_ProjName ""
@@ -114,7 +114,7 @@ LIB32=link.exe -lib
 # ADD BASE LIB32 /nologo /out:"Debug/libdb32sd.lib"
 # ADD LIB32 /nologo /out:"Debug_static/libdb32sd.lib"
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/bdb/build_win32/db_static1.dsp

@@ -7,19 +7,19 @@
 CFG=db_static1 - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "db_static1.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "db_static1.mak" CFG="db_static1 - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "db_static1 - Win32 Release" (based on "Win32 (x86) External Target")
 !MESSAGE "db_static1 - Win32 Debug" (based on "Win32 (x86) External Target")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -64,7 +64,7 @@ CFG=db_static1 - Win32 Debug
 # PROP Bsc_Name "db_static1.bsc"
 # PROP Target_Dir ""
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 
@@ -75,7 +75,7 @@ CFG=db_static1 - Win32 Debug
 
 !ELSEIF  "$(CFG)" == "db_static1 - Win32 Debug"
 
-!ENDIF 
+!ENDIF
 
 # Begin Source File
 

VC++Files/bdb/build_win32/db_tcl.dsp

@@ -7,19 +7,19 @@
 CFG=db_tcl - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "db_tcl.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "db_tcl.mak" CFG="db_tcl - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "db_tcl - Win32 Release" (based on "Win32 (x86) Dynamic-Link Library")
 !MESSAGE "db_tcl - Win32 Debug" (based on "Win32 (x86) Dynamic-Link Library")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP Scc_ProjName ""
@@ -81,7 +81,7 @@ LINK32=link.exe
 # ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /dll /debug /machine:I386 /pdbtype:sept
 # ADD LINK32 Debug/libdb32d.lib tcl83d.lib /nologo /base:"0x13000000" /subsystem:windows /dll /pdb:none /debug /machine:I386 /out:"Debug/libdb_tcl32d.dll" /fixed:no
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/bdb/build_win32/db_test.dsp

@@ -7,19 +7,19 @@
 CFG=db_test - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "db_test.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "db_test.mak" CFG="db_test - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "db_test - Win32 Release" (based on "Win32 (x86) Console Application")
 !MESSAGE "db_test - Win32 Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP Scc_ProjName ""
@@ -85,7 +85,7 @@ PostBuild_Desc=Copy built executable files.
 PostBuild_Cmds=copy Debug\*.exe .
 # End Special Build Tool
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/bdb/build_win32/db_upgrade.dsp

@@ -7,16 +7,16 @@
 CFG=db_upgrade - Win32 Debug Static
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "db_upgrade.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "db_upgrade.mak" CFG="db_upgrade - Win32 Debug Static"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "db_upgrade - Win32 Release" (based on\
  "Win32 (x86) Console Application")
 !MESSAGE "db_upgrade - Win32 Debug" (based on\
@@ -25,7 +25,7 @@ CFG=db_upgrade - Win32 Debug Static
  "Win32 (x86) Console Application")
 !MESSAGE "db_upgrade - Win32 Debug Static" (based on\
  "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP Scc_ProjName ""
@@ -131,7 +131,7 @@ LINK32=link.exe
 # ADD BASE LINK32 Debug_static/libdb32d.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 # ADD LINK32 Debug_static/libdb32sd.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/bdb/build_win32/db_verify.dsp

@@ -7,16 +7,16 @@
 CFG=db_verify - Win32 Debug Static
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "db_verify.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "db_verify.mak" CFG="db_verify - Win32 Debug Static"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "db_verify - Win32 Release" (based on\
  "Win32 (x86) Console Application")
 !MESSAGE "db_verify - Win32 Debug" (based on\
@@ -25,7 +25,7 @@ CFG=db_verify - Win32 Debug Static
  "Win32 (x86) Console Application")
 !MESSAGE "db_verify - Win32 Debug Static" (based on\
  "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP Scc_ProjName ""
@@ -131,7 +131,7 @@ LINK32=link.exe
 # ADD BASE LINK32 Debug_static/libdb32d.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 # ADD LINK32 Debug_static/libdb32sd.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/bdb/build_win32/ex_access.dsp

@@ -7,16 +7,16 @@
 CFG=ex_access - Win32 Debug Static
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "ex_access.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "ex_access.mak" CFG="ex_access - Win32 Debug Static"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "ex_access - Win32 Release" (based on\
  "Win32 (x86) Console Application")
 !MESSAGE "ex_access - Win32 Debug" (based on\
@@ -25,7 +25,7 @@ CFG=ex_access - Win32 Debug Static
  "Win32 (x86) Console Application")
 !MESSAGE "ex_access - Win32 Debug Static" (based on\
  "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP Scc_ProjName ""
@@ -131,7 +131,7 @@ LINK32=link.exe
 # ADD BASE LINK32 Debug_static/libdb32d.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 # ADD LINK32 Debug_static/libdb32sd.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/bdb/build_win32/ex_btrec.dsp

@@ -7,16 +7,16 @@
 CFG=ex_btrec - Win32 Debug Static
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "ex_btrec.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "ex_btrec.mak" CFG="ex_btrec - Win32 Debug Static"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "ex_btrec - Win32 Release" (based on\
  "Win32 (x86) Console Application")
 !MESSAGE "ex_btrec - Win32 Debug" (based on\
@@ -25,7 +25,7 @@ CFG=ex_btrec - Win32 Debug Static
  "Win32 (x86) Console Application")
 !MESSAGE "ex_btrec - Win32 Debug Static" (based on\
  "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP Scc_ProjName ""
@@ -131,7 +131,7 @@ LINK32=link.exe
 # ADD BASE LINK32 Debug_static/libdb32d.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 # ADD LINK32 Debug_static/libdb32sd.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/bdb/build_win32/ex_env.dsp

@@ -7,16 +7,16 @@
 CFG=ex_env - Win32 Debug Static
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "ex_env.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "ex_env.mak" CFG="ex_env - Win32 Debug Static"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "ex_env - Win32 Release" (based on\
  "Win32 (x86) Console Application")
 !MESSAGE "ex_env - Win32 Debug" (based on\
@@ -25,7 +25,7 @@ CFG=ex_env - Win32 Debug Static
  "Win32 (x86) Console Application")
 !MESSAGE "ex_env - Win32 Debug Static" (based on\
  "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP Scc_ProjName ""
@@ -131,7 +131,7 @@ LINK32=link.exe
 # ADD BASE LINK32 Debug_static/libdb32d.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 # ADD LINK32 Debug_static/libdb32sd.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/bdb/build_win32/ex_lock.dsp

@@ -7,16 +7,16 @@
 CFG=ex_lock - Win32 Debug Static
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "ex_lock.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "ex_lock.mak" CFG="ex_lock - Win32 Debug Static"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "ex_lock - Win32 Release" (based on\
  "Win32 (x86) Console Application")
 !MESSAGE "ex_lock - Win32 Debug" (based on\
@@ -25,7 +25,7 @@ CFG=ex_lock - Win32 Debug Static
  "Win32 (x86) Console Application")
 !MESSAGE "ex_lock - Win32 Debug Static" (based on\
  "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP Scc_ProjName ""
@@ -131,7 +131,7 @@ LINK32=link.exe
 # ADD BASE LINK32 Debug_static/libdb32d.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 # ADD LINK32 Debug_static/libdb32sd.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/bdb/build_win32/ex_mpool.dsp

@@ -7,16 +7,16 @@
 CFG=ex_mpool - Win32 Debug Static
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "ex_mpool.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "ex_mpool.mak" CFG="ex_mpool - Win32 Debug Static"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "ex_mpool - Win32 Release" (based on\
  "Win32 (x86) Console Application")
 !MESSAGE "ex_mpool - Win32 Debug" (based on\
@@ -25,7 +25,7 @@ CFG=ex_mpool - Win32 Debug Static
  "Win32 (x86) Console Application")
 !MESSAGE "ex_mpool - Win32 Debug Static" (based on\
  "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP Scc_ProjName ""
@@ -131,7 +131,7 @@ LINK32=link.exe
 # ADD BASE LINK32 Debug_static/libdb32d.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 # ADD LINK32 Debug_static/libdb32sd.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/bdb/build_win32/ex_tpcb.dsp

@@ -7,16 +7,16 @@
 CFG=ex_tpcb - Win32 Debug Static
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "ex_tpcb.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "ex_tpcb.mak" CFG="ex_tpcb - Win32 Debug Static"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "ex_tpcb - Win32 Release" (based on\
  "Win32 (x86) Console Application")
 !MESSAGE "ex_tpcb - Win32 Debug" (based on\
@@ -25,7 +25,7 @@ CFG=ex_tpcb - Win32 Debug Static
  "Win32 (x86) Console Application")
 !MESSAGE "ex_tpcb - Win32 Debug Static" (based on\
  "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP Scc_ProjName ""
@@ -131,7 +131,7 @@ LINK32=link.exe
 # ADD BASE LINK32 Debug_static/libdb32d.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 # ADD LINK32 Debug_static/libdb32sd.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/bdb/build_win32/excxx_access.dsp

@@ -7,16 +7,16 @@
 CFG=excxx_access - Win32 Debug Static
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "excxx_access.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "excxx_access.mak" CFG="excxx_access - Win32 Debug Static"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "excxx_access - Win32 Release" (based on\
  "Win32 (x86) Console Application")
 !MESSAGE "excxx_access - Win32 Debug" (based on\
@@ -25,7 +25,7 @@ CFG=excxx_access - Win32 Debug Static
  "Win32 (x86) Console Application")
 !MESSAGE "excxx_access - Win32 Debug Static" (based on\
  "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP Scc_ProjName ""
@@ -131,7 +131,7 @@ LINK32=link.exe
 # ADD BASE LINK32 Debug_static/libdb32d.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 # ADD LINK32 Debug_static/libdb32sd.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/bdb/build_win32/excxx_btrec.dsp

@@ -7,16 +7,16 @@
 CFG=excxx_btrec - Win32 Debug Static
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "excxx_btrec.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "excxx_btrec.mak" CFG="excxx_btrec - Win32 Debug Static"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "excxx_btrec - Win32 Release" (based on\
  "Win32 (x86) Console Application")
 !MESSAGE "excxx_btrec - Win32 Debug" (based on\
@@ -25,7 +25,7 @@ CFG=excxx_btrec - Win32 Debug Static
  "Win32 (x86) Console Application")
 !MESSAGE "excxx_btrec - Win32 Debug Static" (based on\
  "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP Scc_ProjName ""
@@ -131,7 +131,7 @@ LINK32=link.exe
 # ADD BASE LINK32 Debug_static/libdb32d.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 # ADD LINK32 Debug_static/libdb32sd.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/bdb/build_win32/excxx_env.dsp

@@ -7,16 +7,16 @@
 CFG=excxx_env - Win32 Debug Static
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "excxx_env.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "excxx_env.mak" CFG="excxx_env - Win32 Debug Static"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "excxx_env - Win32 Release" (based on\
  "Win32 (x86) Console Application")
 !MESSAGE "excxx_env - Win32 Debug" (based on\
@@ -25,7 +25,7 @@ CFG=excxx_env - Win32 Debug Static
  "Win32 (x86) Console Application")
 !MESSAGE "excxx_env - Win32 Debug Static" (based on\
  "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP Scc_ProjName ""
@@ -131,7 +131,7 @@ LINK32=link.exe
 # ADD BASE LINK32 Debug_static/libdb32d.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 # ADD LINK32 Debug_static/libdb32sd.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/bdb/build_win32/excxx_lock.dsp

@@ -7,16 +7,16 @@
 CFG=excxx_lock - Win32 Debug Static
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "excxx_lock.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "excxx_lock.mak" CFG="excxx_lock - Win32 Debug Static"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "excxx_lock - Win32 Release" (based on\
  "Win32 (x86) Console Application")
 !MESSAGE "excxx_lock - Win32 Debug" (based on\
@@ -25,7 +25,7 @@ CFG=excxx_lock - Win32 Debug Static
  "Win32 (x86) Console Application")
 !MESSAGE "excxx_lock - Win32 Debug Static" (based on\
  "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP Scc_ProjName ""
@@ -131,7 +131,7 @@ LINK32=link.exe
 # ADD BASE LINK32 Debug_static/libdb32d.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 # ADD LINK32 Debug_static/libdb32sd.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/bdb/build_win32/excxx_mpool.dsp

@@ -7,16 +7,16 @@
 CFG=excxx_mpool - Win32 Debug Static
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "excxx_mpool.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "excxx_mpool.mak" CFG="excxx_mpool - Win32 Debug Static"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "excxx_mpool - Win32 Release" (based on\
  "Win32 (x86) Console Application")
 !MESSAGE "excxx_mpool - Win32 Debug" (based on\
@@ -25,7 +25,7 @@ CFG=excxx_mpool - Win32 Debug Static
  "Win32 (x86) Console Application")
 !MESSAGE "excxx_mpool - Win32 Debug Static" (based on\
  "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP Scc_ProjName ""
@@ -131,7 +131,7 @@ LINK32=link.exe
 # ADD BASE LINK32 Debug_static/libdb32d.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 # ADD LINK32 Debug_static/libdb32sd.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/bdb/build_win32/excxx_tpcb.dsp

@@ -7,16 +7,16 @@
 CFG=excxx_tpcb - Win32 Debug Static
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "excxx_tpcb.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "excxx_tpcb.mak" CFG="excxx_tpcb - Win32 Debug Static"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "excxx_tpcb - Win32 Release" (based on\
  "Win32 (x86) Console Application")
 !MESSAGE "excxx_tpcb - Win32 Debug" (based on\
@@ -25,7 +25,7 @@ CFG=excxx_tpcb - Win32 Debug Static
  "Win32 (x86) Console Application")
 !MESSAGE "excxx_tpcb - Win32 Debug Static" (based on\
  "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP Scc_ProjName ""
@@ -131,7 +131,7 @@ LINK32=link.exe
 # ADD BASE LINK32 Debug_static/libdb32d.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 # ADD LINK32 Debug_static/libdb32sd.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:none /debug /machine:I386 /fixed:no
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/client/mysql.dsp

@@ -7,19 +7,19 @@
 CFG=mysql - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "mysql.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "mysql.mak" CFG="mysql - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "mysql - Win32 Release" (based on "Win32 (x86) Console Application")
 !MESSAGE "mysql - Win32 Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -79,7 +79,7 @@ LINK32=link.exe
 # ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
 # ADD LINK32 mysqlclient.lib wsock32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /debug /machine:I386 /out:"../client_debug/mysql.exe" /pdbtype:sept /libpath:"..\lib_debug\\"
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 
@@ -99,7 +99,7 @@ SOURCE=.\mysql.cpp
 
 !ELSEIF  "$(CFG)" == "mysql - Win32 Debug"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # End Target

VC++Files/client/mysqladmin.dsp

@@ -7,19 +7,19 @@
 CFG=mysqladmin - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "mysqladmin.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "mysqladmin.mak" CFG="mysqladmin - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "mysqladmin - Win32 Release" (based on "Win32 (x86) Console Application")
 !MESSAGE "mysqladmin - Win32 Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -78,7 +78,7 @@ LINK32=link.exe
 # ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
 # ADD LINK32 mysqlclient.lib wsock32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /debug /machine:I386 /out:"../client_debug/mysqladmin.exe" /pdbtype:sept /libpath:"..\lib_debug\\"
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/client/mysqlcheck.dsp

@@ -7,18 +7,18 @@
 CFG=mysqlcheck - Win32 Release
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "mysqlcheck.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "mysqlcheck.mak" CFG="mysqlcheck - Win32 Release"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "mysqlcheck - Win32 Release" (based on "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0

VC++Files/client/mysqlclient.dsp

@@ -7,19 +7,19 @@
 CFG=mysqlclient - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "mysqlclient.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "mysqlclient.mak" CFG="mysqlclient - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "mysqlclient - Win32 Release" (based on "Win32 (x86) Static Library")
 !MESSAGE "mysqlclient - Win32 Debug" (based on "Win32 (x86) Static Library")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -76,7 +76,7 @@ LIB32=link.exe -lib
 # ADD BASE LIB32 /nologo
 # ADD LIB32 /nologo /out:"..\lib_debug\mysqlclient.lib"
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 
@@ -228,7 +228,7 @@ SOURCE=..\mysys\mf_iocache2.c
 
 # ADD CPP /Od
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File

VC++Files/client/mysqlclient.dsw

@@ -26,4 +26,3 @@ Package=<3>
 }}}
 
 ###############################################################################
-

VC++Files/client/mysqldump.dsp

@@ -7,19 +7,19 @@
 CFG=mysqldump - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "mysqldump.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "mysqldump.mak" CFG="mysqldump - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "mysqldump - Win32 Release" (based on "Win32 (x86) Console Application")
 !MESSAGE "mysqldump - Win32 Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -78,7 +78,7 @@ LINK32=link.exe
 # ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
 # ADD LINK32 mysqlclient.lib wsock32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /out:"../client_debug/mysqldump.exe" /pdbtype:sept /libpath:"..\lib_debug\\"
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 
@@ -95,7 +95,7 @@ SOURCE=.\mysqldump.c
 # ADD CPP /W3
 # SUBTRACT CPP /YX
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # End Target

VC++Files/client/mysqlimport.dsp

@@ -7,19 +7,19 @@
 CFG=mysqlimport - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "mysqlimport.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "mysqlimport.mak" CFG="mysqlimport - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "mysqlimport - Win32 Release" (based on "Win32 (x86) Console Application")
 !MESSAGE "mysqlimport - Win32 Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -79,7 +79,7 @@ LINK32=link.exe
 # ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
 # ADD LINK32 mysqlclient.lib wsock32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib setargv.obj /nologo /subsystem:console /incremental:no /debug /machine:I386 /out:"../client_debug/mysqlimport.exe" /pdbtype:sept /libpath:"..\lib_debug\\"
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/client/mysqlshow.dsp

@@ -7,19 +7,19 @@
 CFG=mysqlshow - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "mysqlshow.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "mysqlshow.mak" CFG="mysqlshow - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "mysqlshow - Win32 Release" (based on "Win32 (x86) Console Application")
 !MESSAGE "mysqlshow - Win32 Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -78,7 +78,7 @@ LINK32=link.exe
 # ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
 # ADD LINK32 mysqlclient.lib wsock32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /out:"../client_debug/mysqlshow.exe" /pdbtype:sept /libpath:"..\lib_debug\\"
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/comp_err/comp_err.dsp

@@ -7,18 +7,18 @@
 CFG=comp_err - Win32 Release
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "comp_err.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "comp_err.mak" CFG="comp_err - Win32 Release"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "comp_err - Win32 Release" (based on "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0

VC++Files/contrib/asm386/zlibvc.dsp

@@ -8,16 +8,16 @@
 CFG=zlibvc - Win32 Release
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "zlibvc.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "zlibvc.mak" CFG="zlibvc - Win32 Release"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "zlibvc - Win32 Release" (based on "Win32 (x86) Dynamic-Link Library")
 !MESSAGE "zlibvc - Win32 Debug" (based on "Win32 (x86) Dynamic-Link Library")
 !MESSAGE "zlibvc - Win32 ReleaseAxp" (based on\
@@ -26,7 +26,7 @@ CFG=zlibvc - Win32 Release
  "Win32 (x86) Dynamic-Link Library")
 !MESSAGE "zlibvc - Win32 ReleaseWithoutCrtdll" (based on\
  "Win32 (x86) Dynamic-Link Library")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP Scc_ProjName ""
@@ -191,7 +191,7 @@ LINK32=link.exe
 # ADD LINK32 gvmat32.obj kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\zlibvc_1\zlib.dll"
 # SUBTRACT LINK32 /pdb:none
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 
@@ -216,13 +216,13 @@ SOURCE=.\adler32.c
 DEP_CPP_ADLER=\
 	".\zconf.h"\
 	".\zlib.h"\
-	
+
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -238,13 +238,13 @@ SOURCE=.\compress.c
 DEP_CPP_COMPR=\
 	".\zconf.h"\
 	".\zlib.h"\
-	
+
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -260,13 +260,13 @@ SOURCE=.\crc32.c
 DEP_CPP_CRC32=\
 	".\zconf.h"\
 	".\zlib.h"\
-	
+
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -284,13 +284,13 @@ DEP_CPP_DEFLA=\
 	".\zconf.h"\
 	".\zlib.h"\
 	".\zutil.h"\
-	
+
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -307,7 +307,7 @@ SOURCE=.\gvmat32c.c
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -324,13 +324,13 @@ DEP_CPP_GZIO_=\
 	".\zconf.h"\
 	".\zlib.h"\
 	".\zutil.h"\
-	
+
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -351,13 +351,13 @@ DEP_CPP_INFBL=\
 	".\zconf.h"\
 	".\zlib.h"\
 	".\zutil.h"\
-	
+
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -379,13 +379,13 @@ DEP_CPP_INFCO=\
 	".\zconf.h"\
 	".\zlib.h"\
 	".\zutil.h"\
-	
+
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -407,13 +407,13 @@ DEP_CPP_INFFA=\
 	".\zconf.h"\
 	".\zlib.h"\
 	".\zutil.h"\
-	
+
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -431,13 +431,13 @@ DEP_CPP_INFLA=\
 	".\zconf.h"\
 	".\zlib.h"\
 	".\zutil.h"\
-	
+
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -455,13 +455,13 @@ DEP_CPP_INFTR=\
 	".\zconf.h"\
 	".\zlib.h"\
 	".\zutil.h"\
-	
+
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -482,13 +482,13 @@ DEP_CPP_INFUT=\
 	".\zconf.h"\
 	".\zlib.h"\
 	".\zutil.h"\
-	
+
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -506,13 +506,13 @@ DEP_CPP_TREES=\
 	".\zconf.h"\
 	".\zlib.h"\
 	".\zutil.h"\
-	
+
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -528,13 +528,13 @@ SOURCE=.\uncompr.c
 DEP_CPP_UNCOM=\
 	".\zconf.h"\
 	".\zlib.h"\
-	
+
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -551,7 +551,7 @@ SOURCE=.\unzip.c
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -568,7 +568,7 @@ SOURCE=.\zip.c
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -593,13 +593,13 @@ DEP_CPP_ZUTIL=\
 	".\zconf.h"\
 	".\zlib.h"\
 	".\zutil.h"\
-	
+
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # End Group

VC++Files/contrib/asm386/zlibvc.dsw

@@ -38,4 +38,3 @@ Package=<3>
 }}}
 
 ###############################################################################
-

VC++Files/contrib/minizip/zlibvc.dsp

@@ -8,16 +8,16 @@
 CFG=zlibvc - Win32 Release
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "zlibvc.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "zlibvc.mak" CFG="zlibvc - Win32 Release"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "zlibvc - Win32 Release" (based on "Win32 (x86) Dynamic-Link Library")
 !MESSAGE "zlibvc - Win32 Debug" (based on "Win32 (x86) Dynamic-Link Library")
 !MESSAGE "zlibvc - Win32 ReleaseAxp" (based on\
@@ -26,7 +26,7 @@ CFG=zlibvc - Win32 Release
  "Win32 (x86) Dynamic-Link Library")
 !MESSAGE "zlibvc - Win32 ReleaseWithoutCrtdll" (based on\
  "Win32 (x86) Dynamic-Link Library")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP Scc_ProjName ""
@@ -191,7 +191,7 @@ LINK32=link.exe
 # ADD LINK32 gvmat32.obj kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\zlibvc_1\zlib.dll"
 # SUBTRACT LINK32 /pdb:none
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 
@@ -216,13 +216,13 @@ SOURCE=.\adler32.c
 DEP_CPP_ADLER=\
 	".\zconf.h"\
 	".\zlib.h"\
-	
+
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -238,13 +238,13 @@ SOURCE=.\compress.c
 DEP_CPP_COMPR=\
 	".\zconf.h"\
 	".\zlib.h"\
-	
+
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -260,13 +260,13 @@ SOURCE=.\crc32.c
 DEP_CPP_CRC32=\
 	".\zconf.h"\
 	".\zlib.h"\
-	
+
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -284,13 +284,13 @@ DEP_CPP_DEFLA=\
 	".\zconf.h"\
 	".\zlib.h"\
 	".\zutil.h"\
-	
+
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -307,7 +307,7 @@ SOURCE=.\gvmat32c.c
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -324,13 +324,13 @@ DEP_CPP_GZIO_=\
 	".\zconf.h"\
 	".\zlib.h"\
 	".\zutil.h"\
-	
+
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -351,13 +351,13 @@ DEP_CPP_INFBL=\
 	".\zconf.h"\
 	".\zlib.h"\
 	".\zutil.h"\
-	
+
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -379,13 +379,13 @@ DEP_CPP_INFCO=\
 	".\zconf.h"\
 	".\zlib.h"\
 	".\zutil.h"\
-	
+
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -407,13 +407,13 @@ DEP_CPP_INFFA=\
 	".\zconf.h"\
 	".\zlib.h"\
 	".\zutil.h"\
-	
+
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -431,13 +431,13 @@ DEP_CPP_INFLA=\
 	".\zconf.h"\
 	".\zlib.h"\
 	".\zutil.h"\
-	
+
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -455,13 +455,13 @@ DEP_CPP_INFTR=\
 	".\zconf.h"\
 	".\zlib.h"\
 	".\zutil.h"\
-	
+
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -482,13 +482,13 @@ DEP_CPP_INFUT=\
 	".\zconf.h"\
 	".\zlib.h"\
 	".\zutil.h"\
-	
+
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -506,13 +506,13 @@ DEP_CPP_TREES=\
 	".\zconf.h"\
 	".\zlib.h"\
 	".\zutil.h"\
-	
+
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -528,13 +528,13 @@ SOURCE=.\uncompr.c
 DEP_CPP_UNCOM=\
 	".\zconf.h"\
 	".\zlib.h"\
-	
+
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -551,7 +551,7 @@ SOURCE=.\unzip.c
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -568,7 +568,7 @@ SOURCE=.\zip.c
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -593,13 +593,13 @@ DEP_CPP_ZUTIL=\
 	".\zconf.h"\
 	".\zlib.h"\
 	".\zutil.h"\
-	
+
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # End Group

VC++Files/contrib/minizip/zlibvc.dsw

@@ -38,4 +38,3 @@ Package=<3>
 }}}
 
 ###############################################################################
-

VC++Files/dbug/dbug.dsp

@@ -7,19 +7,19 @@
 CFG=dbug - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "dbug.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "dbug.mak" CFG="dbug - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "dbug - Win32 Release" (based on "Win32 (x86) Static Library")
 !MESSAGE "dbug - Win32 Debug" (based on "Win32 (x86) Static Library")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -76,7 +76,7 @@ LIB32=link.exe -lib
 # ADD BASE LIB32 /nologo
 # ADD LIB32 /nologo /out:"..\lib_debug\dbug.lib"
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/dbug/dbug.dsw

@@ -26,4 +26,3 @@ Package=<3>
 }}}
 
 ###############################################################################
-

VC++Files/heap/heap.dsp

@@ -7,19 +7,19 @@
 CFG=heap - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "heap.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "heap.mak" CFG="heap - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "heap - Win32 Release" (based on "Win32 (x86) Static Library")
 !MESSAGE "heap - Win32 Debug" (based on "Win32 (x86) Static Library")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -76,7 +76,7 @@ LIB32=link.exe -lib
 # ADD BASE LIB32 /nologo
 # ADD LIB32 /nologo /out:"..\lib_debug\heap.lib"
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 
@@ -128,7 +128,7 @@ SOURCE=.\hp_hash.c
 
 # SUBTRACT CPP /YX
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File

VC++Files/innobase/innobase.dsp

@@ -7,21 +7,21 @@
 CFG=INNOBASE - WIN32 RELEASE
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "innobase.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "innobase.mak" CFG="INNOBASE - WIN32 RELEASE"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "innobase - Win32 Debug" (based on "Win32 (x86) Static Library")
 !MESSAGE "innobase - Win32 Release" (based on "Win32 (x86) Static Library")
 !MESSAGE "innobase - Win32 nt" (based on "Win32 (x86) Static Library")
 !MESSAGE "innobase - Win32 Max nt" (based on "Win32 (x86) Static Library")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -126,7 +126,7 @@ LIB32=link.exe -lib
 # ADD BASE LIB32 /nologo /out:"..\lib_release\innodb.lib"
 # ADD LIB32 /nologo /out:"..\lib_release\innodb.lib"
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/isam/isam.dsp

@@ -7,19 +7,19 @@
 CFG=isam - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "isam.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "isam.mak" CFG="isam - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "isam - Win32 Release" (based on "Win32 (x86) Static Library")
 !MESSAGE "isam - Win32 Debug" (based on "Win32 (x86) Static Library")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -76,7 +76,7 @@ LIB32=link.exe -lib
 # ADD BASE LIB32 /nologo
 # ADD LIB32 /nologo /out:"..\lib_Debug\isam.lib"
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/isam/isam.dsw

@@ -26,4 +26,3 @@ Package=<3>
 }}}
 
 ###############################################################################
-

VC++Files/isamchk/isamchk.dsp

@@ -7,19 +7,19 @@
 CFG=isamchk - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "isamchk.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "isamchk.mak" CFG="isamchk - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "isamchk - Win32 Release" (based on "Win32 (x86) Console Application")
 !MESSAGE "isamchk - Win32 Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -80,7 +80,7 @@ LINK32=link.exe
 # ADD LINK32 kernel32.lib user32.lib wsock32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib setargv.obj /nologo /subsystem:console /incremental:no /debug /machine:I386 /out:"../client_debug/isamchk.exe" /pdbtype:sept
 # SUBTRACT LINK32 /verbose /pdb:none
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/libmysql/libmysql.dsp

-# Microsoft Developer Studio Project File - Name="libmySQL" - Package Owner=<4>
+# Microsoft Developer Studio Project File - Name="libmysql" - Package Owner=<4>
 # Microsoft Developer Studio Generated Build File, Format Version 6.00
 # ** DO NOT EDIT **
 
 # TARGTYPE "Win32 (x86) Dynamic-Link Library" 0x0102
 
-CFG=libmySQL - Win32 Debug
+CFG=libmysql - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "libmySQL.mak".
-!MESSAGE 
+!MESSAGE
+!MESSAGE NMAKE /f "libmysql.mak".
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "libmySQL.mak" CFG="libmySQL - Win32 Debug"
-!MESSAGE 
+!MESSAGE
+!MESSAGE NMAKE /f "libmysql.mak" CFG="libmysql - Win32 Debug"
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "libmySQL - Win32 Release" (based on "Win32 (x86) Dynamic-Link Library")
-!MESSAGE "libmySQL - Win32 Debug" (based on "Win32 (x86) Dynamic-Link Library")
-!MESSAGE 
+!MESSAGE
+!MESSAGE "libmysql - Win32 Release" (based on "Win32 (x86) Dynamic-Link Library")
+!MESSAGE "libmysql - Win32 Debug" (based on "Win32 (x86) Dynamic-Link Library")
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -29,7 +29,7 @@ CPP=cl.exe
 MTL=midl.exe
 RSC=rc.exe
 
-!IF  "$(CFG)" == "libmySQL - Win32 Release"
+!IF  "$(CFG)" == "libmysql - Win32 Release"
 
 # PROP BASE Use_MFC 0
 # PROP BASE Use_Debug_Libraries 0
@@ -54,15 +54,15 @@ BSC32=bscmake.exe
 # ADD BSC32 /nologo
 LINK32=link.exe
 # ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /dll /machine:I386
-# ADD LINK32 wsock32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /dll /machine:I386 /def:"libmysql.def" /out:"../lib_release/libmySQL.dll" /libpath:"." /libpath:"..\lib_release"
+# ADD LINK32 wsock32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /dll /machine:I386 /def:"libmysql.def" /out:"..\lib_release\libmysql.dll" /libpath:"." /libpath:"..\lib_release"
 # SUBTRACT LINK32 /pdb:none
 # Begin Special Build Tool
 SOURCE="$(InputPath)"
-PostBuild_Desc=Move DLL export lib
-PostBuild_Cmds=xcopy release\libmysql.lib ..\lib_release /y
+PostBuild_Desc=Copy .lib file
+PostBuild_Cmds=xcopy  release\libmysql.lib   ..\lib_release\
 # End Special Build Tool
 
-!ELSEIF  "$(CFG)" == "libmySQL - Win32 Debug"
+!ELSEIF  "$(CFG)" == "libmysql - Win32 Debug"
 
 # PROP BASE Use_MFC 0
 # PROP BASE Use_Debug_Libraries 1
@@ -87,20 +87,20 @@ BSC32=bscmake.exe
 # ADD BSC32 /nologo
 LINK32=link.exe
 # ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /dll /debug /machine:I386 /pdbtype:sept
-# ADD LINK32 zlib.lib wsock32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /dll /incremental:no /map /debug /machine:I386 /def:"libmysql.def" /out:"../lib_debug/libmySQL.dll" /pdbtype:sept /libpath:"." /libpath:"..\lib_debug"
+# ADD LINK32 zlib.lib wsock32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /dll /incremental:no /map /debug /machine:I386 /def:"libmysql.def" /out:"..\lib_debug\libmysql.dll" /pdbtype:sept /libpath:"." /libpath:"..\lib_debug"
 # SUBTRACT LINK32 /pdb:none
 # Begin Special Build Tool
 SOURCE="$(InputPath)"
-PostBuild_Desc=Move DLL export lib
-PostBuild_Cmds=xcopy ..\lib_debug\libmysql.dll C:\winnt\system32\ /y	xcopy     debug\libmysql.lib ..\lib_debug\ /y
+PostBuild_Desc=Copy .lib file
+PostBuild_Cmds=xcopy   ..\lib_debug\libmysql.dll   C:\winnt\system32\  	xcopy  debug\libmysql.lib   ..\lib_debug\
 # End Special Build Tool
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 
-# Name "libmySQL - Win32 Release"
-# Name "libmySQL - Win32 Debug"
+# Name "libmysql - Win32 Release"
+# Name "libmysql - Win32 Debug"
 # Begin Source File
 
 SOURCE=..\mysys\array.c
@@ -287,6 +287,10 @@ SOURCE=..\mysys\my_gethostbyname.c
 # End Source File
 # Begin Source File
 
+SOURCE=..\mysys\my_getopt.c
+# End Source File
+# Begin Source File
+
 SOURCE=..\mysys\my_getwd.c
 # End Source File
 # Begin Source File
@@ -443,6 +447,10 @@ SOURCE=..\strings\strnmov.c
 # End Source File
 # Begin Source File
 
+SOURCE=..\strings\strtoll.c
+# End Source File
+# Begin Source File
+
 SOURCE=..\strings\strxmov.c
 # End Source File
 # Begin Source File

VC++Files/libmysql/libmysql.dsw

@@ -3,7 +3,7 @@ Microsoft Developer Studio Workspace File, Format Version 5.00
 
 ###############################################################################
 
-Project: "libmySQL"=".\libmySQL.dsp" - Package Owner=<4>
+Project: "libmysql"=".\libmysql.dsp" - Package Owner=<4>
 
 Package=<5>
 {{{
@@ -26,4 +26,3 @@ Package=<3>
 }}}
 
 ###############################################################################
-

VC++Files/libmysqld/examples/test_libmysqld.dsp

@@ -7,18 +7,18 @@
 CFG=test_libmysqld - Win32 Release
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "test_libmysqld.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "test_libmysqld.mak" CFG="test_libmysqld - Win32 Release"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "test_libmysqld - Win32 Release" (based on "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0

VC++Files/libmysqld/libmysqld.dsp

@@ -7,19 +7,19 @@
 CFG=libmysqld - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "libmysqld.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "libmysqld.mak" CFG="libmysqld - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "libmysqld - Win32 Release" (based on "Win32 (x86) Dynamic-Link Library")
 !MESSAGE "libmysqld - Win32 Debug" (based on "Win32 (x86) Dynamic-Link Library")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -83,7 +83,7 @@ LINK32=link.exe
 # ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib Wsock32.lib ..\lib_debug\dbug.lib ..\lib_debug\mysys.lib ..\lib_debug\strings.lib ..\lib_debug\regex.lib ..\lib_debug\heap.lib  ..\lib_debug\innodb.lib /nologo /dll /incremental:no /debug /machine:I386 /nodefaultlib:"LIBCMTD" /out:"../lib_debug/libmysqld.dll" /implib:"../lib_debug/libmysqld.lib" /pdbtype:sept
 # SUBTRACT LINK32 /pdb:none
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/libmysqltest/myTest.dsp

@@ -7,19 +7,19 @@
 CFG=myTest - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "myTest.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "myTest.mak" CFG="myTest - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "myTest - Win32 Release" (based on "Win32 (x86) Console Application")
 !MESSAGE "myTest - Win32 Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -78,7 +78,7 @@ LINK32=link.exe
 # ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
 # ADD LINK32 libmysql.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /debug /machine:I386 /pdbtype:sept /libpath:"..\lib_debug"
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/libmysqltest/mytest.dsw

@@ -26,4 +26,3 @@ Package=<3>
 }}}
 
 ###############################################################################
-

VC++Files/merge/merge.dsp

@@ -7,19 +7,19 @@
 CFG=merge - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "merge.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "merge.mak" CFG="merge - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "merge - Win32 Release" (based on "Win32 (x86) Static Library")
 !MESSAGE "merge - Win32 Debug" (based on "Win32 (x86) Static Library")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -76,7 +76,7 @@ LIB32=link.exe -lib
 # ADD BASE LIB32 /nologo
 # ADD LIB32 /nologo /out:"..\lib_debug\merge.lib"
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/merge/merge.dsw

@@ -26,4 +26,3 @@ Package=<3>
 }}}
 
 ###############################################################################
-

VC++Files/my_print_defaults/my_print_defaults.dsp

@@ -7,19 +7,19 @@
 CFG=my_print_defaults - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "my_print_defaults.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "my_print_defaults.mak" CFG="my_print_defaults - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "my_print_defaults - Win32 Release" (based on "Win32 (x86) Console Application")
 !MESSAGE "my_print_defaults - Win32 Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -75,7 +75,7 @@ LINK32=link.exe
 # ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib  kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
 # ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib  kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib wsock32.lib /nologo /subsystem:console /debug /machine:I386 /nodefaultlib:"LIBCMTD.lib" /pdbtype:sept
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/myisam/myisam.dsp

@@ -7,19 +7,19 @@
 CFG=myisam - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "myisam.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "myisam.mak" CFG="myisam - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "myisam - Win32 Release" (based on "Win32 (x86) Static Library")
 !MESSAGE "myisam - Win32 Debug" (based on "Win32 (x86) Static Library")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -74,7 +74,7 @@ LIB32=link.exe -lib
 # ADD BASE LIB32 /nologo
 # ADD LIB32 /nologo /out:"..\lib_Debug\myisam.lib"
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/myisamchk/myisamchk.dsp

@@ -7,19 +7,19 @@
 CFG=myisamchk - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "myisamchk.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "myisamchk.mak" CFG="myisamchk - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "myisamchk - Win32 Release" (based on "Win32 (x86) Console Application")
 !MESSAGE "myisamchk - Win32 Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -78,7 +78,7 @@ LINK32=link.exe
 # ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
 # ADD LINK32 kernel32.lib user32.lib wsock32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib setargv.obj /nologo /subsystem:console /incremental:no /debug /machine:I386 /out:"../client_debug/myisamchk.exe" /pdbtype:sept
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/myisamlog/myisamlog.dsp

@@ -7,19 +7,19 @@
 CFG=myisamlog - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "myisamlog.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "myisamlog.mak" CFG="myisamlog - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "myisamlog - Win32 Release" (based on "Win32 (x86) Console Application")
 !MESSAGE "myisamlog - Win32 Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -79,7 +79,7 @@ LINK32=link.exe
 # ADD LINK32 kernel32.lib user32.lib wsock32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib setargv.obj /nologo /subsystem:console /incremental:no /pdb:"debug/myisamchk.pdb" /debug /machine:I386 /out:"../client_debug/myisamlog.exe" /pdbtype:sept
 # SUBTRACT LINK32 /pdb:none
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/myisammrg/myisammrg.dsp

@@ -7,19 +7,19 @@
 CFG=myisammrg - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "myisammrg.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "myisammrg.mak" CFG="myisammrg - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "myisammrg - Win32 Release" (based on "Win32 (x86) Static Library")
 !MESSAGE "myisammrg - Win32 Debug" (based on "Win32 (x86) Static Library")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -75,7 +75,7 @@ LIB32=link.exe -lib
 # ADD BASE LIB32 /nologo
 # ADD LIB32 /nologo /out:"..\lib_Debug\myisammrg.lib"
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/myisampack/myisampack.dsp

@@ -7,19 +7,19 @@
 CFG=myisampack - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "myisampack.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "myisampack.mak" CFG="myisampack - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "myisampack - Win32 Release" (based on "Win32 (x86) Console Application")
 !MESSAGE "myisampack - Win32 Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -77,7 +77,7 @@ LINK32=link.exe
 # ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
 # ADD LINK32 kernel32.lib user32.lib wsock32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib setargv.obj /nologo /subsystem:console /incremental:no /debug /machine:I386 /pdbtype:sept
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/mysql.dsp

@@ -7,19 +7,19 @@
 CFG=mysql - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "mysql.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "mysql.mak" CFG="mysql - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "mysql - Win32 Release" (based on "Win32 (x86) External Target")
 !MESSAGE "mysql - Win32 Debug" (based on "Win32 (x86) External Target")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP Scc_ProjName ""
@@ -63,7 +63,7 @@ CFG=mysql - Win32 Debug
 # PROP Bsc_Name "mysql.bsc"
 # PROP Target_Dir ""
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 
@@ -74,7 +74,7 @@ CFG=mysql - Win32 Debug
 
 !ELSEIF  "$(CFG)" == "mysql - Win32 Debug"
 
-!ENDIF 
+!ENDIF
 
 # End Target
 # End Project

VC++Files/mysql.dsw

@@ -114,7 +114,7 @@ Package=<4>
 
 ###############################################################################
 
-Project: "libmySQL"=".\libmysql\libmySQL.dsp" - Package Owner=<4>
+Project: "libmysql"=".\libmysql\libmysql.dsp" - Package Owner=<4>
 
 Package=<5>
 {{{
@@ -192,7 +192,7 @@ Package=<5>
 Package=<4>
 {{{
     Begin Project Dependency
-    Project_Dep_Name libmySQL
+    Project_Dep_Name libmysql
     End Project Dependency
 }}}
 
@@ -708,7 +708,7 @@ Package=<5>
 Package=<4>
 {{{
     Begin Project Dependency
-    Project_Dep_Name libmySQL
+    Project_Dep_Name libmysql
     End Project Dependency
 }}}
 
@@ -797,4 +797,3 @@ Package=<3>
 }}}
 
 ###############################################################################
-

VC++Files/mysqlbinlog/mysqlbinlog.dsp

@@ -7,19 +7,19 @@
 CFG=mysqlbinlog - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "mysqlbinlog.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "mysqlbinlog.mak" CFG="mysqlbinlog - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "mysqlbinlog - Win32 Release" (based on "Win32 (x86) Console Application")
 !MESSAGE "mysqlbinlog - Win32 Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -77,7 +77,7 @@ LINK32=link.exe
 # ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
 # ADD LINK32 mysqlclient.lib wsock32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /debug /machine:I386 /out:"../client_debug/mysqlbinlog.exe" /pdbtype:sept /libpath:"..\lib_debug\\"
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/mysqlcheck/mysqlcheck.dsp

@@ -7,19 +7,19 @@
 CFG=mysqlcheck - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "mysqlcheck.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "mysqlcheck.mak" CFG="mysqlcheck - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "mysqlcheck - Win32 Release" (based on "Win32 (x86) Console Application")
 !MESSAGE "mysqlcheck - Win32 Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -76,7 +76,7 @@ LINK32=link.exe
 # ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib  kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
 # ADD LINK32 mysqlclient.lib wsock32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /debug /machine:I386 /out:"../client_debug/mysqlcheck.exe" /pdbtype:sept /libpath:"..\lib_debug\\"
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/mysqldemb/mysqldemb.dsp

@@ -7,19 +7,19 @@
 CFG=mysqldemb - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "mysqldemb.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "mysqldemb.mak" CFG="mysqldemb - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "mysqldemb - Win32 Release" (based on "Win32 (x86) Static Library")
 !MESSAGE "mysqldemb - Win32 Debug" (based on "Win32 (x86) Static Library")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -76,7 +76,7 @@ LIB32=link.exe -lib
 # ADD BASE LIB32 /nologo
 # ADD LIB32 /nologo
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/mysqlmanager/MySqlManager.dsp

@@ -7,19 +7,19 @@
 CFG=MySqlManager - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "MySqlManager.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "MySqlManager.mak" CFG="MySqlManager - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "MySqlManager - Win32 Release" (based on "Win32 (x86) Application")
 !MESSAGE "MySqlManager - Win32 Debug" (based on "Win32 (x86) Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -71,7 +71,7 @@ LINK32=link.exe
 # PROP Ignore_Export_Lib 0
 # PROP Target_Dir ""
 # ADD BASE CPP /nologo /MDd /W3 /Gm /GX /Zi /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_AFXDLL" /Yu"stdafx.h" /FD /c
-# ADD CPP /nologo /G6 /MTd /W3 /Gm /GX /ZI /Od /I "../include" /D "_DEBUG" /D "_WINDOWS" /FD /c
+# ADD CPP /nologo /G6 /MTd /W3 /Gm /GR /GX /Zi /Od /I "../include" /D "_DEBUG" /D "_WINDOWS" /FD /c
 # SUBTRACT CPP /Fr /YX /Yc /Yu
 # ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /o "NUL" /win32
 # ADD MTL /nologo /D "_DEBUG" /o "NUL" /win32
@@ -86,7 +86,7 @@ LINK32=link.exe
 # ADD LINK32 wsock32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib uuid.lib /nologo /subsystem:windows /incremental:no /debug /machine:I386 /out:"../client_debug/MySqlManager.exe" /pdbtype:sept /libpath:"..\lib_debug\\"
 # SUBTRACT LINK32 /pdb:none
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/mysqlmanager/mysqlmanager.dsw

@@ -26,4 +26,3 @@ Package=<3>
 }}}
 
 ###############################################################################
-

VC++Files/mysqlserver/mysqlserver.dsp

@@ -7,19 +7,19 @@
 CFG=mysqlserver - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "mysqlserver.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "mysqlserver.mak" CFG="mysqlserver - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "mysqlserver - Win32 Release" (based on "Win32 (x86) Static Library")
 !MESSAGE "mysqlserver - Win32 Debug" (based on "Win32 (x86) Static Library")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -74,7 +74,7 @@ LIB32=link.exe -lib
 # ADD BASE LIB32 /nologo
 # ADD LIB32 /nologo
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/mysqlshutdown/myshutdown.dsp

@@ -7,19 +7,19 @@
 CFG=myshutdown - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "myshutdown.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "myshutdown.mak" CFG="myshutdown - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "myshutdown - Win32 Release" (based on "Win32 (x86) Application")
 !MESSAGE "myshutdown - Win32 Debug" (based on "Win32 (x86) Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -79,7 +79,7 @@ LINK32=link.exe
 # ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /debug /machine:I386 /pdbtype:sept
 # ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /debug /machine:I386 /pdbtype:sept
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/mysqlshutdown/mysqlshutdown.dsp

@@ -7,19 +7,19 @@
 CFG=mysqlshutdown - Win32 Release
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "mysqlshutdown.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "mysqlshutdown.mak" CFG="mysqlshutdown - Win32 Release"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "mysqlshutdown - Win32 Release" (based on "Win32 (x86) Application")
 !MESSAGE "mysqlshutdown - Win32 Debug" (based on "Win32 (x86) Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -85,7 +85,7 @@ LINK32=link.exe
 # ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /machine:I386 /out:"../client_release/mysqlshutdown.exe"
 # ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /machine:I386 /out:"../client_debug/mysqlshutdown.exe"
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/mysqlwatch/mysqlwatch.dsp

@@ -7,18 +7,18 @@
 CFG=mysqlwatch - Win32 Release
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "mysqlwatch.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "mysqlwatch.mak" CFG="mysqlwatch - Win32 Release"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "mysqlwatch - Win32 Release" (based on "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0

VC++Files/mysys/mysys.dsp

@@ -7,20 +7,20 @@
 CFG=mysys - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "mysys.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "mysys.mak" CFG="mysys - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "mysys - Win32 Release" (based on "Win32 (x86) Static Library")
 !MESSAGE "mysys - Win32 Debug" (based on "Win32 (x86) Static Library")
 !MESSAGE "mysys - Win32 Max" (based on "Win32 (x86) Static Library")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -102,7 +102,7 @@ LIB32=link.exe -lib
 # ADD BASE LIB32 /nologo /out:"..\lib_release\mysys.lib"
 # ADD LIB32 /nologo /out:"..\lib_release\mysys-max.lib"
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 
@@ -121,7 +121,7 @@ SOURCE=.\array.c
 
 !ELSEIF  "$(CFG)" == "mysys - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -406,6 +406,10 @@ SOURCE=.\my_seek.c
 # End Source File
 # Begin Source File
 
+SOURCE=.\my_sleep.c
+# End Source File
+# Begin Source File
+
 SOURCE=.\my_static.c
 # End Source File
 # Begin Source File
@@ -496,7 +500,7 @@ SOURCE=.\thr_lock.c
 
 !ELSEIF  "$(CFG)" == "mysys - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File

VC++Files/mysys/mysys.dsw

@@ -26,4 +26,3 @@ Package=<3>
 }}}
 
 ###############################################################################
-

VC++Files/pack_isam/pack_isam.dsp

@@ -7,19 +7,19 @@
 CFG=pack_isam - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "pack_isam.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "pack_isam.mak" CFG="pack_isam - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "pack_isam - Win32 Release" (based on "Win32 (x86) Console Application")
 !MESSAGE "pack_isam - Win32 Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -77,7 +77,7 @@ LINK32=link.exe
 # ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
 # ADD LINK32 kernel32.lib user32.lib wsock32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib setargv.obj /nologo /subsystem:console /debug /machine:I386 /out:"../client_debug/pack_isam.exe" /pdbtype:sept
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/perror/perror.dsp

@@ -7,19 +7,19 @@
 CFG=perror - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "perror.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "perror.mak" CFG="perror - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "perror - Win32 Release" (based on "Win32 (x86) Application")
 !MESSAGE "perror - Win32 Debug" (based on "Win32 (x86) Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -85,7 +85,7 @@ LINK32=link.exe
 # ADD LINK32 kernel32.lib user32.lib wsock32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /incremental:no /debug /machine:I386 /pdbtype:sept
 # SUBTRACT LINK32 /pdb:none
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/regex/regex.dsp

@@ -7,19 +7,19 @@
 CFG=regex - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "regex.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "regex.mak" CFG="regex - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "regex - Win32 Release" (based on "Win32 (x86) Static Library")
 !MESSAGE "regex - Win32 Debug" (based on "Win32 (x86) Static Library")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -76,7 +76,7 @@ LIB32=link.exe -lib
 # ADD BASE LIB32 /nologo
 # ADD LIB32 /nologo /out:"..\lib_debug\regex.lib"
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/regex/regex.dsw

@@ -26,4 +26,3 @@ Package=<3>
 }}}
 
 ###############################################################################
-

VC++Files/replace/replace.dsp

@@ -7,19 +7,19 @@
 CFG=replace - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "replace.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "replace.mak" CFG="replace - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "replace - Win32 Release" (based on "Win32 (x86) Console Application")
 !MESSAGE "replace - Win32 Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -79,7 +79,7 @@ LINK32=link.exe
 # ADD LINK32 kernel32.lib user32.lib wsock32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib setargv.obj /nologo /subsystem:console /incremental:no /machine:I386 /out:"../client_debug/replace.exe" /pdbtype:sept
 # SUBTRACT LINK32 /debug
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/sql/mysqld.dsp

@@ -7,22 +7,22 @@
 CFG=mysqld - Win32 Release
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "mysqld.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "mysqld.mak" CFG="mysqld - Win32 Release"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "mysqld - Win32 Release" (based on "Win32 (x86) Console Application")
 !MESSAGE "mysqld - Win32 Debug" (based on "Win32 (x86) Console Application")
 !MESSAGE "mysqld - Win32 nt" (based on "Win32 (x86) Console Application")
 !MESSAGE "mysqld - Win32 Max nt" (based on "Win32 (x86) Console Application")
 !MESSAGE "mysqld - Win32 Max" (based on "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -167,7 +167,7 @@ LINK32=link.exe
 # ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib Wsock32.lib ..\lib_release\vio.lib ..\lib_release\isam.lib ..\lib_release\merge.lib ..\lib_release\myisam.lib ..\lib_release\myisammrg.lib ..\lib_release\mysys-max.lib ..\lib_release\strings.lib ..\lib_release\regex.lib ..\lib_release\heap.lib ..\lib_release\innodb.lib ..\lib_release\bdb.lib ..\lib_release\zlib.lib /nologo /subsystem:console /pdb:none /machine:I386 /out:"../client_release/mysqld-max.exe"
 # SUBTRACT LINK32 /debug
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 
@@ -193,7 +193,7 @@ SOURCE=.\convert.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -213,7 +213,7 @@ SOURCE=.\derror.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -237,7 +237,7 @@ SOURCE=.\field.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -257,7 +257,7 @@ SOURCE=.\field_conv.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -277,7 +277,7 @@ SOURCE=.\filesort.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -325,7 +325,7 @@ SOURCE=.\handler.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -344,7 +344,7 @@ SOURCE=.\hash_filo.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -367,7 +367,7 @@ SOURCE=.\hostname.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -387,7 +387,7 @@ SOURCE=.\init.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -407,7 +407,7 @@ SOURCE=.\item.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -427,7 +427,7 @@ SOURCE=.\item_buff.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -447,7 +447,7 @@ SOURCE=.\item_cmpfunc.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -471,7 +471,7 @@ SOURCE=.\item_func.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -491,7 +491,7 @@ SOURCE=.\item_strfunc.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -511,7 +511,7 @@ SOURCE=.\item_sum.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -530,7 +530,7 @@ SOURCE=.\item_timefunc.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -550,7 +550,7 @@ SOURCE=.\item_uniq.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -570,7 +570,7 @@ SOURCE=.\key.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -590,7 +590,7 @@ SOURCE=.\lock.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -610,7 +610,7 @@ SOURCE=.\log.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -633,7 +633,7 @@ SOURCE=.\mf_iocache.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -657,7 +657,7 @@ SOURCE=.\mysqld.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -677,7 +677,7 @@ SOURCE=.\net_pkg.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -700,7 +700,7 @@ SOURCE=.\nt_servc.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -727,7 +727,7 @@ SOURCE=.\opt_range.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -754,7 +754,7 @@ SOURCE=.\password.c
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -774,7 +774,7 @@ SOURCE=.\procedure.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -794,7 +794,7 @@ SOURCE=.\records.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -826,7 +826,7 @@ SOURCE=.\sql_acl.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -850,7 +850,7 @@ SOURCE=.\sql_base.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -874,7 +874,7 @@ SOURCE=.\sql_class.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -902,7 +902,7 @@ SOURCE=.\sql_db.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -922,7 +922,7 @@ SOURCE=.\sql_delete.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -950,7 +950,7 @@ SOURCE=.\sql_insert.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -970,7 +970,7 @@ SOURCE=.\sql_lex.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -990,7 +990,7 @@ SOURCE=.\sql_list.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -1010,7 +1010,7 @@ SOURCE=.\sql_load.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -1034,7 +1034,7 @@ SOURCE=.\sql_map.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -1054,7 +1054,7 @@ SOURCE=.\sql_parse.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -1082,7 +1082,7 @@ SOURCE=.\sql_select.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -1102,7 +1102,7 @@ SOURCE=.\sql_show.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -1122,7 +1122,7 @@ SOURCE=.\sql_string.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -1142,7 +1142,7 @@ SOURCE=.\sql_table.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -1162,7 +1162,7 @@ SOURCE=.\sql_test.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -1190,7 +1190,7 @@ SOURCE=.\sql_update.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -1210,7 +1210,7 @@ SOURCE=.\sql_yacc.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -1234,7 +1234,7 @@ SOURCE=.\thr_malloc.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -1254,7 +1254,7 @@ SOURCE=.\time.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -1278,7 +1278,7 @@ SOURCE=.\unireg.cpp
 
 !ELSEIF  "$(CFG)" == "mysqld - Win32 Max"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # End Target

VC++Files/sql/mysqld.dsw

@@ -26,4 +26,3 @@ Package=<3>
 }}}
 
 ###############################################################################
-

VC++Files/sql/mysqldmax.dsp

@@ -7,20 +7,20 @@
 CFG=mysqldmax - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "mysqldmax.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "mysqldmax.mak" CFG="mysqldmax - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "mysqldmax - Win32 Release" (based on "Win32 (x86) Console Application")
 !MESSAGE "mysqldmax - Win32 Debug" (based on "Win32 (x86) Console Application")
 !MESSAGE "mysqldmax - Win32 nt" (based on "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -103,7 +103,7 @@ LINK32=link.exe
 # ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib Wsock32.lib ..\lib_release\isam.lib ..\lib_release\merge.lib ..\lib_release\myisam.lib ..\lib_release\myisammrg.lib ..\lib_release\mysys.lib ..\lib_release\strings.lib ..\lib_release\regex.lib ..\lib_release\heap.lib ..\lib_release\zlib.lib ..\lib_release\innobase-nt.lib ..\lib_release\libdb32s.lib /nologo /subsystem:console /pdb:"NT/mysqld-nt.pdb" /map:"NT/mysqld-nt.map" /machine:I386 /nodefaultlib:"LIBC" /out:"../client_release/mysqld-max-nt.exe"
 # SUBTRACT LINK32 /pdb:none
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 
@@ -123,7 +123,7 @@ SOURCE=.\convert.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -139,7 +139,7 @@ SOURCE=.\derror.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -155,7 +155,7 @@ SOURCE=.\field.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -171,7 +171,7 @@ SOURCE=.\field_conv.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -187,7 +187,7 @@ SOURCE=.\filesort.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -231,7 +231,7 @@ SOURCE=.\handler.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -246,7 +246,7 @@ SOURCE=.\hash_filo.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -265,7 +265,7 @@ SOURCE=.\hostname.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -281,7 +281,7 @@ SOURCE=.\init.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -297,7 +297,7 @@ SOURCE=.\item.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -313,7 +313,7 @@ SOURCE=.\item_buff.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -329,7 +329,7 @@ SOURCE=.\item_cmpfunc.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -349,7 +349,7 @@ SOURCE=.\item_func.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -365,7 +365,7 @@ SOURCE=.\item_strfunc.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -381,7 +381,7 @@ SOURCE=.\item_sum.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -396,7 +396,7 @@ SOURCE=.\item_timefunc.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -412,7 +412,7 @@ SOURCE=.\item_uniq.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -428,7 +428,7 @@ SOURCE=.\key.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -444,7 +444,7 @@ SOURCE=.\lock.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -460,7 +460,7 @@ SOURCE=.\log.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -483,7 +483,7 @@ SOURCE=.\mf_iocache.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -507,7 +507,7 @@ SOURCE=.\mysqld.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -523,7 +523,7 @@ SOURCE=.\net_pkg.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -542,7 +542,7 @@ SOURCE=.\nt_servc.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -565,7 +565,7 @@ SOURCE=.\opt_range.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -588,7 +588,7 @@ SOURCE=.\password.c
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -604,7 +604,7 @@ SOURCE=.\procedure.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -620,7 +620,7 @@ SOURCE=.\records.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -640,7 +640,7 @@ SOURCE=.\sql_acl.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -660,7 +660,7 @@ SOURCE=.\sql_base.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -680,7 +680,7 @@ SOURCE=.\sql_class.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -704,7 +704,7 @@ SOURCE=.\sql_db.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -720,7 +720,7 @@ SOURCE=.\sql_delete.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -736,7 +736,7 @@ SOURCE=.\sql_insert.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -752,7 +752,7 @@ SOURCE=.\sql_lex.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -768,7 +768,7 @@ SOURCE=.\sql_list.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -784,7 +784,7 @@ SOURCE=.\sql_load.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -804,7 +804,7 @@ SOURCE=.\sql_map.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -820,7 +820,7 @@ SOURCE=.\sql_parse.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -844,7 +844,7 @@ SOURCE=.\sql_select.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -860,7 +860,7 @@ SOURCE=.\sql_show.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -876,7 +876,7 @@ SOURCE=.\sql_string.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -892,7 +892,7 @@ SOURCE=.\sql_table.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -908,7 +908,7 @@ SOURCE=.\sql_test.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -924,7 +924,7 @@ SOURCE=.\sql_update.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -940,7 +940,7 @@ SOURCE=.\sql_yacc.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -960,7 +960,7 @@ SOURCE=.\thr_malloc.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -976,7 +976,7 @@ SOURCE=.\time.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -992,7 +992,7 @@ SOURCE=.\unireg.cpp
 
 !ELSEIF  "$(CFG)" == "mysqldmax - Win32 nt"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File

VC++Files/sql/old/mysqld.dsw

@@ -26,4 +26,3 @@ Package=<3>
 }}}
 
 ###############################################################################
-

VC++Files/strings/MASM6x/strings.dsp

@@ -7,19 +7,19 @@
 CFG=strings - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "strings.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "strings.mak" CFG="strings - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "strings - Win32 Release" (based on "Win32 (x86) Static Library")
 !MESSAGE "strings - Win32 Debug" (based on "Win32 (x86) Static Library")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -76,7 +76,7 @@ LIB32=link.exe -lib
 # ADD BASE LIB32 /nologo
 # ADD LIB32 /nologo /out:"..\lib_debug\strings.lib"
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 
@@ -186,7 +186,7 @@ InputName=Strings
 
 # End Custom Build
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -233,7 +233,7 @@ InputName=Strxmov
 
 # End Custom Build
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File

VC++Files/strings/MASM6x/strings.dsw

@@ -26,4 +26,3 @@ Package=<3>
 }}}
 
 ###############################################################################
-

VC++Files/strings/backup/strings.dsp

@@ -7,19 +7,19 @@
 CFG=strings - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "strings.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "strings.mak" CFG="strings - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "strings - Win32 Release" (based on "Win32 (x86) Static Library")
 !MESSAGE "strings - Win32 Debug" (based on "Win32 (x86) Static Library")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -76,7 +76,7 @@ LIB32=link.exe -lib
 # ADD BASE LIB32 /nologo
 # ADD LIB32 /nologo /out:"..\lib_debug\strings.lib"
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 
@@ -186,7 +186,7 @@ InputName=Strings
 
 # End Custom Build
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -233,7 +233,7 @@ InputName=Strxmov
 
 # End Custom Build
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File

VC++Files/strings/backup/strings.dsw

@@ -26,4 +26,3 @@ Package=<3>
 }}}
 
 ###############################################################################
-

VC++Files/strings/noMASM/strings.dsp

@@ -7,19 +7,19 @@
 CFG=strings - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "strings.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "strings.mak" CFG="strings - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "strings - Win32 Release" (based on "Win32 (x86) Static Library")
 !MESSAGE "strings - Win32 Debug" (based on "Win32 (x86) Static Library")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -76,7 +76,7 @@ LIB32=link.exe -lib
 # ADD BASE LIB32 /nologo
 # ADD LIB32 /nologo /out:"..\lib_debug\strings.lib"
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/strings/noMASM/strings.dsw

@@ -26,4 +26,3 @@ Package=<3>
 }}}
 
 ###############################################################################
-

VC++Files/strings/strings.dsp

@@ -7,19 +7,19 @@
 CFG=strings - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "strings.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "strings.mak" CFG="strings - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "strings - Win32 Release" (based on "Win32 (x86) Static Library")
 !MESSAGE "strings - Win32 Debug" (based on "Win32 (x86) Static Library")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -76,7 +76,7 @@ LIB32=link.exe -lib
 # ADD BASE LIB32 /nologo
 # ADD LIB32 /nologo /out:"..\lib_debug\strings.lib"
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 
@@ -190,7 +190,7 @@ InputName=Strings
 
 # End Custom Build
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File
@@ -237,7 +237,7 @@ InputName=Strxmov
 
 # End Custom Build
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # Begin Source File

VC++Files/strings/strings.dsw

@@ -26,4 +26,3 @@ Package=<3>
 }}}
 
 ###############################################################################
-

VC++Files/test1/test1.dsp

@@ -7,19 +7,19 @@
 CFG=test1 - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "test1.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "test1.mak" CFG="test1 - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "test1 - Win32 Release" (based on "Win32 (x86) Console Application")
 !MESSAGE "test1 - Win32 Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -79,7 +79,7 @@ LINK32=link.exe
 # ADD LINK32 libmysql.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept /libpath:"..\lib_debug"
 # SUBTRACT LINK32 /incremental:no
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 
@@ -95,7 +95,7 @@ SOURCE=.\mysql_thr.c
 
 !ELSEIF  "$(CFG)" == "test1 - Win32 Debug"
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # End Target

VC++Files/thr_insert_test/thr_insert_test.dsp

@@ -7,19 +7,19 @@
 CFG=thr_insert_test - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "thr_insert_test.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "thr_insert_test.mak" CFG="thr_insert_test - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "thr_insert_test - Win32 Release" (based on "Win32 (x86) Application")
 !MESSAGE "thr_insert_test - Win32 Debug" (based on "Win32 (x86) Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -83,7 +83,7 @@ LINK32=link.exe
 # ADD LINK32 mysqlclient.lib wsock32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /pdb:"debug/mysqldump.pdb" /debug /machine:I386 /out:"../client_debug/thr_insert_test.exe" /pdbtype:sept /libpath:"..\lib_debug\\"
 # SUBTRACT LINK32 /pdb:none
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/thr_test/thr_test.dsp

@@ -7,19 +7,19 @@
 CFG=thr_test - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "thr_test.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "thr_test.mak" CFG="thr_test - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "thr_test - Win32 Release" (based on "Win32 (x86) Console Application")
 !MESSAGE "thr_test - Win32 Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -79,7 +79,7 @@ LINK32=link.exe
 # ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
 # ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /debug /machine:I386 /pdbtype:sept
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 
@@ -97,7 +97,7 @@ SOURCE=.\thr_test.c
 
 # ADD CPP /FAcs
 
-!ENDIF 
+!ENDIF
 
 # End Source File
 # End Target

VC++Files/vio/vio.dsp

@@ -7,19 +7,19 @@
 CFG=vio - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "vio.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "vio.mak" CFG="vio - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "vio - Win32 Release" (based on "Win32 (x86) Static Library")
 !MESSAGE "vio - Win32 Debug" (based on "Win32 (x86) Static Library")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -74,7 +74,7 @@ LIB32=link.exe -lib
 # ADD BASE LIB32 /nologo
 # ADD LIB32 /nologo /out:"..\lib_debug\vio.lib"
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

VC++Files/zlib/zlib.dsp

@@ -7,19 +7,19 @@
 CFG=zlib - Win32 Debug
 !MESSAGE This is not a valid makefile. To build this project using NMAKE,
 !MESSAGE use the Export Makefile command and run
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "zlib.mak".
-!MESSAGE 
+!MESSAGE
 !MESSAGE You can specify a configuration when running NMAKE
 !MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
+!MESSAGE
 !MESSAGE NMAKE /f "zlib.mak" CFG="zlib - Win32 Debug"
-!MESSAGE 
+!MESSAGE
 !MESSAGE Possible choices for configuration are:
-!MESSAGE 
+!MESSAGE
 !MESSAGE "zlib - Win32 Release" (based on "Win32 (x86) Static Library")
 !MESSAGE "zlib - Win32 Debug" (based on "Win32 (x86) Static Library")
-!MESSAGE 
+!MESSAGE
 
 # Begin Project
 # PROP AllowPerConfigDependencies 0
@@ -75,7 +75,7 @@ LIB32=link.exe -lib
 # ADD BASE LIB32 /nologo
 # ADD LIB32 /nologo /out:"..\lib_debug\zlib.lib"
 
-!ENDIF 
+!ENDIF
 
 # Begin Target
 

include/my_global.h

@@ -261,6 +261,7 @@ C_MODE_END
 #define CONFIG_SMP
 #include <asm/atomic.h>
 #endif
+#include <errno.h>				/* Recommended by debian */
 
 /* Go around some bugs in different OS and compilers */
 #if defined(_HPUX_SOURCE) && defined(HAVE_SYS_STREAM_H)

sql/log_event.cc

@@ -1838,6 +1838,7 @@ int Load_log_event::exec_event(NET* net, struct st_relay_log_info* rli,
     tables.db = thd->db;
     tables.alias = tables.real_name = (char*)table_name;
     tables.lock_type = TL_WRITE;
+    tables.updating= 1;
     // the table will be opened in mysql_load    
     if (table_rules_on && !tables_ok(thd, &tables))
     {

sql/mf_iocache.cc

@@ -70,13 +70,18 @@ int _my_b_net_read(register IO_CACHE *info, byte *Buffer,
   /* to set up stuff for my_b_get (no _) */
   info->read_end = (info->read_pos = (byte*) net->read_pos) + read_length;
   Buffer[0] = info->read_pos[0];		/* length is always 1 */
-  info->read_pos++;
 
   /*
     info->request_pos is used by log_loaded_block() to know the size
-    of the current block
+    of the current block.
+    info->pos_in_file is used by log_loaded_block() too.
   */
+  info->pos_in_file+= read_length;
   info->request_pos=info->read_pos;
+
+  info->read_pos++;
+
+info->request_pos=info->read_pos;
   DBUG_RETURN(0);
 }