Free memory allocated by the server for all plugins,
with or without deinit() method.

After fix for bug 39653 the shortest available secondary index was used for
full table scan. Primary clustered key was used only if no secondary index
can be used. However, when chosen secondary index includes all fields of the
table being scanned it's better to use primary index since the amount of
data to scan is the same but the primary index is clustered.
Now the find_shortest_key function takes this into account.


mysql-test/suite/innodb/r/innodb_mysql.result:
  Added a test case for the bug#55656.
mysql-test/suite/innodb/t/innodb_mysql.test:
  Added a test case for the bug#55656.
sql/sql_select.cc:
  Bug #55656: mysqldump can be slower after bug #39653 fix.
  The find_shortest_key function now prefers clustered primary key
  if found secondary key includes all fields of the table.

Added open log file with FILE_SHARE_DELETE flag on Windows.

sql/log.cc:
  added reopen_fstreams();
  modified redirect_std_streams(): call to sequence of freopen()
  replaced to reopen_fstreams();
  modified flush_error_log(): removed file rename for flushed
  error log file.
sql/mysqld.cc:
  modified main() and init_server_components(): do open log error file
  over call to reopen_fstreams().

Added code resulted in strange linking problem for embedded on Windows
Avoided by not doing this for embedded mode
It's irrelevant for embedded server anyway, --protocol will be ignored

Queries involving predicates of the form "const NOT BETWEEN
not_indexed_column AND indexed_column" could return wrong data
due to incorrect handling by the range optimizer.

For "c NOT BETWEEN f1 AND f2" predicates, get_mm_tree()
produces a disjunction of the SEL_ARG trees for "f1 > c" and
"f2 < c". If one of the trees is empty (i.e. one of the
arguments is not sargable) the resulting tree should be empty
as well, since the whole expression in this case is not
sargable.

The above logic is implemented in get_mm_tree() as follows. The
initial state of the resulting tree is NULL (aka empty). We
then iterate through arguments and compute the corresponding
SEL_ARG tree (either "f1 > c" or "f2 < c"). If the resulting
tree is NULL, it is simply replaced by the generated
tree. Otherwise it is replaced by a disjunction of itself and
the generated tree. The obvious flaw in this implementation is
that if the first argument is not sargable and thus produces a
NULL tree, the resulting tree will simply be replaced by the
tree for the second argument. As a result, "c NOT BETWEEN f1
AND f2" will end up as just "f2 < c".

Fixed by adding a check so that when the first argument
produces an empty tree for the NOT BETWEEN case, the loop is
aborted with an empty tree as a result. The whole idea of using
a loop for 2 arguments does not make much sense, but it was
probably used to avoid code duplication for several BETWEEN
variants.

        'CREATE TABLE IF NOT EXISTS ... SELECT' behaviour
BUG#55474, BUG#55499, BUG#55598, BUG#55616 and BUG#55777 are fixed
in this patch too.

This is the 5.1 part.
It implements:
- if the table exists, binlog two events: CREATE TABLE IF NOT EXISTS
  and INSERT ... SELECT

- Insert nothing and binlog nothing on master if the existing object
  is a view. It only generates a warning that table already exists.


mysql-test/r/trigger.result:
  Ather this patch, 'CREATE TABLE IF NOT EXISTS ... SELECT' will not
  insert anything if the creating table already exists and is a view.
sql/sql_class.h:
  Declare virtual function write_to_binlog() for select_insert.
  It's used to binlog 'create select'
sql/sql_insert.cc:
  Implement write_to_binlog();
  Use write_to_binlog() instead of binlog_query() to binlog the statement.
  if the table exists, binlog two events: CREATE TABLE IF NOT EXISTS
  and INSERT ... SELECT
sql/sql_lex.h:
  Declare create_select_start_with_brace and create_select_pos.
  They are helpful for binlogging 'create select'
sql/sql_parse.cc:
  Do nothing on master if the existing object is a view.
sql/sql_yacc.yy:
  Record the relative postion of 'SELECT' in the 'CREATE ...SELECT' statement.
  Record whether there is a '(' before the 'SELECT' clause.

The server was not checking for errors generated during
the execution of Item::val_xxx() methods when copying
data to the group, order, or distinct temp table's row.
Fixed by extending the copy_funcs() to return an error
code and by checking for that error code on the places
copy_funcs() is called. 
Test case added.

variable assignments

The assert() that is firing is checking if expressions that can't be
null return a NULL when evaluated.
MAKEDATE() function can return NULL if the second argument is 
less then or equal to 0. Thus its nullability depends not only on 
the nullability of its arguments but also on their values.
Fixed by (overoptimistically) setting MAKEDATE() to be nullable 
despite the nullability of its arguments.
Test added.
Had to update one test result to reflect the metadata change.

feature

The test for bug no 50939 was put in range.test which isn't such a good idea
since it requires partitioning. Fixed by moving the test case to
partitioning_range.test.

Updated the README file.

           INSERT IGNORE ... SELECT ... UNION SELECT ...

This assert was triggered by INSERT IGNORE ... SELECT. The assert checks that a
statement either sends OK or an error to the client. If the bug was triggered
on release builds, it caused OK to be sent to the client instead of the correct
error message (in this case ER_FIELD_SPECIFIED_TWICE).

The reason the assert was triggered, was that lex->no_error was set to TRUE
during JOIN::optimize() because of IGNORE. This causes all errors to be ignored.
However, not all errors can be ignored. Some, such as ER_FIELD_SPECIFIED_TWICE
will cause the INSERT to fail no matter what. But since lex->no_error was set,
the critical errors were ignored, the INSERT failed and neither OK nor the
error message was sent to the client.

This patch fixes the problem by temporarily turning off lex->no_error in
places where errors cannot be ignored during processing of INSERT ... SELECT.

Test case added to insert.test.

read_rnd_buffer_size

Applied the updated description from Paul's patch.

Undo workaround as fix is being merged in

failures on sparc64.

file .\item_subselect.cc, line 836

IN quantified predicates are never executed directly. They are rather wrapped
inside nodes called IN Optimizers (Item_in_optimizer) which take care of the
execution. However, this is not done during query preparation. Unfortunately
the LIKE predicate pre-evaluates constant right-hand side arguments even
during name resolution. Likely this is meant as an optimization.

Fixed by not pre-evaluating LIKE arguments in view prepare mode.

Reverted the ulong->uint diff
Re-applied the first diff.
The original commit message follows:

enum plugin system variables are ulong internally, not int.
On systems where long is not the same as an int it causes
problems. 
Fixed by correct typecasting. Removed the test from the 
experimental list.

Follow-up patch: added test cases for -0 and while

The enum system variables were handled inconsistently 
as ints, unsigned int and unsigned long on various places.
This caused problems on platforms on which 
sizeof(int) != sizeof(long).
Fixed by homogenizing the type of the enum variables
to unsigned int, since it's size compatible with the C enum
type. 
Removed the test from the experimental list.

if() treated any non-numeric string as false
Fixed to treat those as true instead
Added some test cases
Fixed missing $ in variable name in include/mix2.inc

Post fix

mysql-test/t/mysqlbinlog.test:
  Updated for Bug#34283

With statement- or mixed-mode logging, "LOAD DATA INFILE" queries
are written to the binlog using special types of log events.
When mysqlbinlog reads such events, it re-creates the file in a
temporary directory with a generated filename and outputs a
"LOAD DATA INFILE" query where the filename is replaced by the
generated file. The temporary file is not deleted by mysqlbinlog
after termination.

To fix the problem, in mixed mode we go to row-based. In SBR, we
document it to remind user the tmpfile is left in a temporary
directory.




mysql-test/extra/rpl_tests/rpl_loaddata.test:
  Updated for Bug#34283
mysql-test/suite/binlog/r/binlog_mixed_load_data.result:
  Test result for BUG#34283.
mysql-test/suite/binlog/t/binlog_killed_simulate.test:
  Updated for Bug#34283
mysql-test/suite/binlog/t/binlog_mixed_load_data.test:
  Added the test file to verify that 'load data infile...' statement
  will go to row-based in mixed mode.
mysql-test/suite/binlog/t/binlog_stm_blackhole.test:
  Updated for Bug#34283
mysql-test/suite/rpl/r/rpl_innodb_mixed_dml.result:
  Updated for Bug#34283
mysql-test/suite/rpl/t/rpl_loaddata_fatal.test:
  Updated for Bug#34283
mysql-test/suite/rpl/t/rpl_loaddata_map.test:
  Updated for Bug#34283
mysql-test/suite/rpl/t/rpl_slave_load_remove_tmpfile.test:
  Updated for Bug#34283
mysql-test/suite/rpl/t/rpl_stm_log.test:
  Updated for Bug#34283
sql/sql_load.cc:
  Added code to go to row-based in mixed mode for
  'load data infile ...' statement

A CREATE...SELECT that fails is written to the binary log if a non-transactional
statement is updated. If the logging format is ROW, the CREATE statement and the
changes are written to the binary log as distinct events and by consequence the
created table is not rolled back in the slave.

In this patch, we opted to let the slave goes out of sync by not writting to the
binary log the CREATE statement. We do this by simply reseting the binary log's
cache.

mysql-test/suite/rpl/r/rpl_drop.result:
  Added a test case.
mysql-test/suite/rpl/t/rpl_drop.test:
  Added a test case.
sql/log.cc:
  Introduced a function to clean up the cache.
sql/log.h:
  Introduced a function to clean up the cache.
sql/sql_insert.cc:
  Cleaned up the binary log cache if a CREATE...SELECT fails.

The expect file can now include "restart:<server options>"
Also drop check-testcase if this has been done
Added comment explaining the restart: syntax