Skip to content

S
slapos
Commit 45387b9a authored by Kirill Smelkov's avatar Kirill Smelkov
Browse files
Options

X render-templates -d

parent 8baf732e
Hide whitespace changes
Inline Side-by-side
Showing with 0 additions and 4210 deletions
software/ors-amarisoft/instance-tdd-enb-input-schema.json deleted 100644 → 0
View file @ 8baf732e
{
"type": "object",
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"bandwidth": {
"title": "Bandwidth",
"description": "Downlink Bandwidth",
"type": "string",
"enum": [
"1.4 MHz",
"3 MHz",
"5 MHz",
"10 MHz",
"15 MHz",
"20 MHz"
],
"default": "20 MHz"
},
"n_antenna_dl": {
"title": "Number of DL antennas",
"description": "1, 2, 4 or 8. Number of DL antennas.",
"type": "number",
"default": 2
},
"n_antenna_ul": {
"title": "Number of UL antennas",
"description": "1, 2, 4 or 8. Number of UL antennas.",
"type": "number",
"default": 2
},
"tdd_ul_dl_config": {
"title": "TDD",
"description": "TDD",
"type": "string",
"enum": [
"[Configuration 2] 5ms 2UL 6DL (default)",
"[Configuration 6] 5ms 5UL 3DL (maximum uplink)"
],
"default": "5ms 2UL 7DL 4/6 (default)"
},
"sdr_number": {
"title": "SDR Number",
"description": "SDR Number",
"type": "number",
"default": 0
},
"cpri_port": {
"title": "CPRI Port Number",
"description": "CPRI Port Number",
"type": "number",
"default": 0
},
"cell_list": {
"title": "Cell List",
"description": "Cell List",
"patternProperties": {
".*": {
"properties": {
"dl_earfcn": {
"title": "DL EARFCN",
"description": "Downlink E-UTRA Absolute Radio Frequency Channel Number of the cell",
"type": "number"
},
"pci": {
"title": "Physical Cell ID",
"description": "Physical Cell IDs",
"type": "number"
},
"cell_id": {
"title": "Cell ID",
"description": "Cell IDs",
"type": "string"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"tx_gain": {
"title": "Tx gain",
"description": "Tx gain (in dB)",
"type": "number"
},
"rx_gain": {
"title": "Rx gain",
"description": "Rx gain (in dB)",
"type": "number"
},
"enb_id": {
"title": "eNB ID",
"description": "eNB ID",
"type": "string",
"default": "0x1A2D0"
},
"gtp_addr": {
"title": "GTP Address",
"description": "String. Set the IP address (and optional port) on which the GTP-U packets are received. The default port is 2152. It is normally the IP address of the network interface connected to the core network.",
"type": "string",
"default": "127.0.1.1"
},
"mme_list": {
"title": "MME list",
"description": "Optionnal. List of MME to which the gNodeB is connected",
"patternProperties": {
".*": {
"properties": {
"mme_addr": {
"title": "MME Address",
"description": "IP address (and optional port) of S1AP SCTP connection to the MME. The default port is 36412.",
"type": "string"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"plmn_list": {
"title": "PLMN list",
"description": "List of PLMNs broadcasted by the eNodeB, at most 6 (default: 00101)",
"patternProperties": {
".*": {
"properties": {
"plmn": {
"default": "00101",
"title": "Public Land Mobile Network",
"description": "Public Land Mobile Network",
"type": "string"
},
"attach_without_pdn": {
"default": false,
"title": "Attach Without PDN",
"description": "Optional boolean. Indicates if PLMN supports attach without PDN connectivity.",
"type": "boolean"
},
"reserved": {
"default": false,
"title": "Reserved",
"description": "True if the cell is reserved for operator use.",
"type": "boolean"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"lte_handover_a3_offset": {
"title": "A3 offset for LTE handover",
"description": "RSRP gain offset between gNBs which will trigger handover",
"type": "number",
"default": 6
},
"lte_handover_time_to_trigger": {
"title": "Time to Trigger for LTE handover",
"description": "Time to triger after which LTE handover will be triggered if A3 offset is reached",
"type": "number",
"enum": [
0,
40,
64,
80,
100,
128,
160,
256,
320,
480,
512,
640,
1024,
1280,
2560,
5120
],
"default": 480
},
"ncell_list": {
"title": "Neighbour Cell Info",
"description": "Neighbour Cell Info",
"patternProperties": {
".*": {
"properties": {
"dl_earfcn": {
"title": "DL EARFCN",
"description": "Downlink E-UTRA Absolute Radio Frequency Channel Number of the neighbour cell",
"type": "number"
},
"pci": {
"title": "Physical Cell ID",
"description": "Physical Cell ID of the neighbour cell",
"type": "number"
},
"cell_id": {
"title": "Cell ID",
"description": "Concatenation of enb_id and cell_id of the neighbour cell",
"type": "string"
},
"tac": {
"title": "Tracking Area Code",
"description": "Integer (range 0 to 16777215)",
"type": "number"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"websocket_password": {
"title": "Websocket password",
"description": "Activates websocket for remote control and sets password",
"type": "string"
},
"inactivity_timer": {
"title": "Inactivity Timer",
"description": "Send RRC connection release after this time (in ms) of network inactivity.",
"type": "number",
"default": 10000
},
"log_phy_debug": {
"title": "Physical layer log debug",
"description": "Enable debug mode for physical layer logs",
"type": "boolean",
"default": false
},
"gps_sync": {
"default": false,
"title": "GPS synchronisation",
"description": "True if GPS should be used for synchronisation",
"type": "boolean"
},
"disable_sdr": {
"default": false,
"title": "Disable SDR",
"description": "Disables radio",
"type": "boolean"
},
"use_ipv4": {
"default": false,
"title": "Use IPv4",
"description": "Set to true to use IPv4 for AMF / MME addresses",
"type": "boolean"
},
"enb_stats_fetch_period": {
"title": "eNB statistics fetch period (seconds)",
"description": "Describes how often a call to Amarisoft remote API is made to get eNB statistics",
"type": "number",
"default": 60
},
"enb_drb_stats_enabled": {
"title": "Enable eNB drb statistics",
"description": "Enable eNB drb statistics through 100Hz polling, needed for E-UTRAN IP Throughput KPI",
"type": "boolean",
"default": true
},
"max_rx_sample_db": {
"title": "Maximum RX sample value (dB)",
"description": "Maximum RX sample threshold above which RX saturated promise will fail",
"type": "number",
"default": 0
},
"min_txrx_delay": {
"title": "Minimum available time for radio front end processing (ms)",
"description": "Baseband latency promise will fail if minimum TX/RX diff reaches threshold (higher than this value)",
"type": "number",
"default": 5
},
"avg_txrx_delay": {
"title": "Average available time for radio front end processing (ms)",
"description": "Baseband latency promise will fail if average TX/RX diff reaches threshold (higher than this value)",
"type": "number",
"default": 7
},
"xlog_fluentbit_forward_host": {
"title": "Address to Forward Xlog by Fluenbit",
"description": "Address of Remote Fluentd or Fluentbit Server to Forward Xlog",
"type": "string"
},
"xlog_fluentbit_forward_port": {
"title": "Port to Forward Xlog by Fluentbit",
"description": "Optional Port of Remote Fluentd or Fluentbit Server to Forward Xlog",
"type": "string"
},
"xlog_fluentbit_forward_shared_key": {
"title": "Shared Key to Forward Xlog by Fluentbit",
"description": "Secret Key Shared with Remote Fluentd or Fluentbit Server for Authentication when Forwarding Xlog",
"type": "string"
}
}
}
software/ors-amarisoft/instance-tdd-gnb-input-schema.json deleted 100644 → 0
View file @ 8baf732e
{
"type": "object",
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"nr_bandwidth": {
"title": "Bandwidth",
"description": "Downlink Bandwidth (in MHz)",
"type": "number",
"default": 40
},
"n_antenna_dl": {
"title": "Number of DL antennas",
"description": "1, 2, 4 or 8. Number of DL antennas.",
"type": "number",
"default": 2
},
"n_antenna_ul": {
"title": "Number of UL antennas",
"description": "1, 2, 4 or 8. Number of UL antennas.",
"type": "number",
"default": 2
},
"tdd_ul_dl_config": {
"title": "TDD",
"description": "TDD",
"type": "string",
"enum": [
"5ms 2UL 7DL 4/6 (default)",
"2.5ms 1UL 3DL 2/10",
"5ms 8UL 3DL 2/10 (maximum uplink)"
],
"default": "5ms 2UL 7DL 4/6 (default)"
},
"dl_nr_arfcn": {
"title": "DL NR ARFCN",
"description": "Downlink NR Absolute Radio Frequency Channel Number of the cell",
"type": "number"
},
"nr_band": {
"title": "NR band",
"description": "NR band number",
"type": "number"
},
"ssb_pos_bitmap": {
"title": "SSB Position Bitmap",
"description": "SSB position bitmap in bits (4, 8 or 64 bits depending on the DL frequency).",
"type": "string",
"default": 10000000
},
"pci": {
"title": "Physical Cell ID",
"description": "Physical Cell ID",
"type": "number",
"default": 500
},
"cell_id": {
"title": "Cell ID",
"description": "Cell ID",
"type": "string",
"default": "0x01"
},
"tx_gain": {
"title": "Tx gain",
"description": "Tx gain (in dB)",
"type": "number"
},
"rx_gain": {
"title": "Rx gain",
"description": "Rx gain (in dB)",
"type": "number"
},
"gnb_id": {
"title": "gNB ID",
"description": "gNB ID",
"type": "string",
"default": "0x12345"
},
"gnb_id_bits": {
"title": "gNB ID bits",
"description": "Number of bits for the gNodeB global identifier. (range 22 to 32)",
"type": "number",
"default": 28
},
"amf_list": {
"title": "AMF list",
"description": "Optionnal. List of AMF to which the gNodeB is connected",
"patternProperties": {
".*": {
"properties": {
"amf_addr": {
"title": "AMF Address",
"description": "IP address (and optional port) of NGAP SCTP connection to the AMF. The default port is 38412.",
"type": "string"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"plmn_list": {
"title": "PLMN list",
"description": "List of PLMNs broadcasted by the gNodeB, at most 12 (default: 00101)",
"patternProperties": {
".*": {
"properties": {
"plmn": {
"default": "00101",
"title": "Public Land Mobile Network",
"description": "Public Land Mobile Network",
"type": "string"
},
"tac": {
"default": 100,
"title": "Tracking Area Code",
"description": "Integer (range 0 to 16777215)",
"type": "number"
},
"ranac": {
"title": "Optional integer (range 0 to 255)",
"description": "RAN Area Code",
"type": "number"
},
"reserved": {
"default": false,
"title": "Reserved",
"description": "True if the cell is reserved for operator use.",
"type": "boolean"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"nssai": {
"title": "AMF slices configuration",
"description": "AMF slices configuration.",
"patternProperties": {
".*": {
"properties": {
"sst": {
"default": 1,
"title": "Slice Service Type",
"description": "Integer (range 1 to 255).",
"type": "number"
},
"sd": {
"default": "0x000032",
"title": "Slice Differentiator",
"description": "Optional integer (range 0 to 0xFFFFFE)",
"type": "string"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"nr_handover_a3_offset": {
"title": "A3 offset for NR handover",
"description": "RSRP gain offset between gNBs which will trigger handover",
"type": "number",
"default": 6
},
"nr_handover_time_to_trigger": {
"title": "Time to Trigger for NR handover",
"description": "Time to triger after which NR handover will be triggerd if A3 offset is reached",
"type": "number",
"enum": [
0,
40,
64,
80,
100,
128,
160,
256,
320,
480,
512,
640,
1024,
1280,
2560,
5120
],
"default": 100
},
"ncell_list": {
"title": "Neighbour Cell Info",
"description": "Neighbour Cell Info",
"patternProperties": {
".*": {
"properties": {
"dl_nr_arfcn": {
"title": "DL NR ARFCN",
"description": "Downlink NR Absolute Radio Frequency Channel Number of the neighbour cell",
"type": "number"
},
"ssb_nr_arfcn": {
"title": "SSB NR ARFCN",
"description": "SSB NR Absolute Radio Frequency Channel Number of the neighbour cell",
"type": "number"
},
"pci": {
"title": "Physical Cell ID",
"description": "Physical Cell ID of the neighbour cell",
"type": "number"
},
"nr_cell_id": {
"title": "NR Cell ID",
"description": "Concatenation of gnb_id and cell_id of the neighbour cell",
"type": "string"
},
"gnb_id_bits": {
"title": "gNB ID bits",
"description": "Number of bits for the gNodeB global identifier. (range 22 to 32)",
"type": "number"
},
"nr_band": {
"title": "NR band",
"description": "NR band number",
"type": "number"
},
"tac": {
"title": "Tracking Area Code",
"description": "Integer (range 0 to 16777215)",
"type": "number"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"xn_peers": {
"title": "XN Peers",
"description": "XN Peers",
"patternProperties": {
".*": {
"properties": {
"xn_addr": {
"title": "XN Address",
"description": "XN Address of the neighbour cell (gNB Address)",
"type": "string"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"websocket_password": {
"title": "Websocket password",
"description": "Activates websocket for remote control and sets password",
"type": "string"
},
"inactivity_timer": {
"title": "Inactivity Timer",
"description": "Send RRC connection release after this time (in ms) of network inactivity.",
"type": "number",
"default": 10000
},
"log_phy_debug": {
"title": "Physical layer log debug",
"description": "Enable debug mode for physical layer logs",
"type": "boolean",
"default": false
},
"gps_sync": {
"default": false,
"title": "GPS synchronisation",
"description": "True if GPS should be used for synchronisation",
"type": "boolean"
},
"disable_sdr": {
"default": false,
"title": "Disable SDR",
"description": "Disables radio",
"type": "boolean"
},
"use_ipv4": {
"default": false,
"title": "Use IPv4",
"description": "Set to true to use IPv4 for AMF / MME addresses",
"type": "boolean"
},
"gnb_stats_fetch_period": {
"title": "gNB statistics fetch period (seconds)",
"description": "Describes how often a call to Amarisoft remote API is made to get gNB statistics",
"type": "number",
"default": 60
},
"gnb_drb_stats_enabled": {
"title": "Enable gNB drb statistics",
"description": "Enable gNB drb statistics through 100Hz polling, needed for E-UTRAN IP Throughput KPI",
"type": "boolean",
"default": true
},
"max_rx_sample_db": {
"title": "Maximum RX sample value (dB)",
"description": "Maximum RX sample threshold above which RX saturated promise will fail",
"type": "number",
"default": 0
},
"min_txrx_delay": {
"title": "Minimum available time for radio front end processing (ms)",
"description": "Minimum TX/RX diff threshold above which baseband latency promise will fail",
"type": "number",
"default": 5
},
"avg_txrx_delay": {
"title": "Average available time for radio front end processing (ms)",
"description": "Average TX/RX diff threshold above which baseband latency promise will fail",
"type": "number",
"default": 7
},
"xlog_fluentbit_forward_host": {
"title": "Address to Forward Xlog by Fluenbit",
"description": "Address of Remote Fluentd or Fluentbit Server to Forward Xlog",
"type": "string"
},
"xlog_fluentbit_forward_port": {
"title": "Port to Forward Xlog by Fluentbit",
"description": "Optional Port of Remote Fluentd or Fluentbit Server to Forward Xlog",
"type": "string"
},
"xlog_fluentbit_forward_shared_key": {
"title": "Shared Key to Forward Xlog by Fluentbit",
"description": "Secret Key Shared with Remote Fluentd or Fluentbit Server for Authentication when Forwarding Xlog",
"type": "string"
}
}
}
software/ors-amarisoft/instance-tdd-m2ru-enb-input-schema.json deleted 100644 → 0
View file @ 8baf732e
{
"type": "object",
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"bandwidth": {
"title": "Bandwidth",
"description": "Downlink Bandwidth",
"type": "string",
"enum": [
"1.4 MHz",
"3 MHz",
"5 MHz",
"10 MHz",
"15 MHz",
"20 MHz"
],
"default": "20 MHz"
},
"n_antenna_dl": {
"title": "Number of DL antennas",
"description": "1, 2, 4 or 8. Number of DL antennas.",
"type": "number",
"default": 2
},
"n_antenna_ul": {
"title": "Number of UL antennas",
"description": "1, 2, 4 or 8. Number of UL antennas.",
"type": "number",
"default": 2
},
"tdd_ul_dl_config": {
"title": "TDD",
"description": "TDD",
"type": "string",
"enum": [
"[Configuration 2] 5ms 2UL 6DL (default)",
"[Configuration 6] 5ms 5UL 3DL (maximum uplink)"
],
"default": "5ms 2UL 7DL 4/6 (default)"
},
"sdr_number": {
"title": "SDR Number",
"description": "SDR Number",
"type": "number",
"default": 0
},
"cpri_port": {
"title": "CPRI Port Number",
"description": "CPRI Port Number",
"type": "number",
"default": 0
},
"cpri_mult": {
"title": "CPRI Mult",
"description": "Select the CPRI line bit rate in terms of multiple of option 1 (614.4 Mbps). E.g set 4 for option 3, 8 for option 5 and 16 for option 7.",
"type": "number",
"default": 16,
"enum": [
4,
5,
8,
16
]
},
"cell_list": {
"title": "Cell List",
"description": "Cell List",
"patternProperties": {
".*": {
"properties": {
"cpri_rx_delay": {
"title": "CPRI RX Delay",
"description": "Delays between TX and RX position in CPRI frame. This should be set to the value of (T2a + T3a - Toffset) provided by the RRH specification.",
"type": "number",
"default": 25.11
},
"cpri_tx_delay": {
"title": "CPRI TX Delay",
"description": "Advances Start of Frame relative to PPS to compensate for delays in transmit line and RRH. This should be set to T12 + T2a.",
"type": "number",
"default": 14.71
},
"cpri_tx_dbm": {
"title": "CPRI TX dBm",
"description": "Optional floating points value in dBm (default 0). Needed by ENB/GNB to have a notion of actual output power. Computed from maximum power output of the RRH for a 0dBFS input signal (full scale). ",
"type": "number",
"default": 63
},
"cpri_port_number": {
"title": "CPRI Port Number",
"description": "CPRI Port Number",
"type": "number",
"default": 0
},
"dl_earfcn": {
"title": "DL EARFCN",
"description": "Downlink E-UTRA Absolute Radio Frequency Channel Number of the cell",
"type": "number"
},
"pci": {
"title": "Physical Cell ID",
"description": "Physical Cell IDs",
"type": "number"
},
"cell_id": {
"title": "Cell ID",
"description": "Cell IDs",
"type": "string"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"dnsmasq": {
"default": false,
"title": "dnsmasq",
"description": "dnsmasq",
"type": "boolean"
},
"rrh_mac_addr": {
"default": "00:0a:00:00:10:20",
"title": "RRH MAC address",
"description": "RRH MAC address used for DNSMASQ",
"type": "string"
},
"enb_id": {
"title": "eNB ID",
"description": "eNB ID",
"type": "string",
"default": "0x1A2D0"
},
"gtp_addr": {
"title": "GTP Address",
"description": "String. Set the IP address (and optional port) on which the GTP-U packets are received. The default port is 2152. It is normally the IP address of the network interface connected to the core network.",
"type": "string",
"default": "127.0.1.1"
},
"mme_list": {
"title": "MME list",
"description": "Optionnal. List of MME to which the gNodeB is connected",
"patternProperties": {
".*": {
"properties": {
"mme_addr": {
"title": "MME Address",
"description": "IP address (and optional port) of S1AP SCTP connection to the MME. The default port is 36412.",
"type": "string"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"plmn_list": {
"title": "PLMN list",
"description": "List of PLMNs broadcasted by the eNodeB, at most 6 (default: 00101)",
"patternProperties": {
".*": {
"properties": {
"plmn": {
"default": "00101",
"title": "Public Land Mobile Network",
"description": "Public Land Mobile Network",
"type": "string"
},
"attach_without_pdn": {
"default": false,
"title": "Attach Without PDN",
"description": "Optional boolean. Indicates if PLMN supports attach without PDN connectivity.",
"type": "boolean"
},
"reserved": {
"default": false,
"title": "Reserved",
"description": "True if the cell is reserved for operator use.",
"type": "boolean"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"lte_handover_a3_offset": {
"title": "A3 offset for LTE handover",
"description": "RSRP gain offset between gNBs which will trigger handover",
"type": "number",
"default": 6
},
"lte_handover_time_to_trigger": {
"title": "Time to Trigger for LTE handover",
"description": "Time to triger after which LTE handover will be triggered if A3 offset is reached",
"type": "number",
"enum": [
0,
40,
64,
80,
100,
128,
160,
256,
320,
480,
512,
640,
1024,
1280,
2560,
5120
],
"default": 480
},
"ncell_list": {
"title": "Neighbour Cell Info",
"description": "Neighbour Cell Info",
"patternProperties": {
".*": {
"properties": {
"dl_earfcn": {
"title": "DL EARFCN",
"description": "Downlink E-UTRA Absolute Radio Frequency Channel Number of the neighbour cell",
"type": "number"
},
"pci": {
"title": "Physical Cell ID",
"description": "Physical Cell ID of the neighbour cell",
"type": "number"
},
"cell_id": {
"title": "Cell ID",
"description": "Concatenation of enb_id and cell_id of the neighbour cell",
"type": "string"
},
"tac": {
"title": "Tracking Area Code",
"description": "Integer (range 0 to 16777215)",
"type": "number"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"websocket_password": {
"title": "Websocket password",
"description": "Activates websocket for remote control and sets password",
"type": "string"
},
"inactivity_timer": {
"title": "Inactivity Timer",
"description": "Send RRC connection release after this time (in ms) of network inactivity.",
"type": "number",
"default": 10000
},
"log_phy_debug": {
"title": "Physical layer log debug",
"description": "Enable debug mode for physical layer logs",
"type": "boolean",
"default": false
},
"gps_sync": {
"default": false,
"title": "GPS synchronisation",
"description": "True if GPS should be used for synchronisation",
"type": "boolean"
},
"disable_sdr": {
"default": false,
"title": "Disable SDR",
"description": "Disables radio",
"type": "boolean"
},
"use_ipv4": {
"default": false,
"title": "Use IPv4",
"description": "Set to true to use IPv4 for AMF / MME addresses",
"type": "boolean"
},
"enb_stats_fetch_period": {
"title": "eNB statistics fetch period (seconds)",
"description": "Describes how often a call to Amarisoft remote API is made to get eNB statistics",
"type": "number",
"default": 60
},
"enb_drb_stats_enabled": {
"title": "Enable eNB drb statistics",
"description": "Enable eNB drb statistics through 100Hz polling, needed for E-UTRAN IP Throughput KPI",
"type": "boolean",
"default": true
},
"max_rx_sample_db": {
"title": "Maximum RX sample value (dB)",
"description": "Maximum RX sample threshold above which RX saturated promise will fail",
"type": "number",
"default": 0
},
"min_txrx_delay": {
"title": "Minimum available time for radio front end processing (ms)",
"description": "Baseband latency promise will fail if minimum TX/RX diff reaches threshold (higher than this value)",
"type": "number",
"default": 5
},
"avg_txrx_delay": {
"title": "Average available time for radio front end processing (ms)",
"description": "Baseband latency promise will fail if average TX/RX diff reaches threshold (higher than this value)",
"type": "number",
"default": 7
},
"xlog_fluentbit_forward_host": {
"title": "Address to Forward Xlog by Fluenbit",
"description": "Address of Remote Fluentd or Fluentbit Server to Forward Xlog",
"type": "string"
},
"xlog_fluentbit_forward_port": {
"title": "Port to Forward Xlog by Fluentbit",
"description": "Optional Port of Remote Fluentd or Fluentbit Server to Forward Xlog",
"type": "string"
},
"xlog_fluentbit_forward_shared_key": {
"title": "Shared Key to Forward Xlog by Fluentbit",
"description": "Secret Key Shared with Remote Fluentd or Fluentbit Server for Authentication when Forwarding Xlog",
"type": "string"
}
}
}
software/ors-amarisoft/instance-tdd-m2ru-gnb-input-schema.json deleted 100644 → 0
View file @ 8baf732e
{
"type": "object",
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"nr_bandwidth": {
"title": "Bandwidth",
"description": "Downlink Bandwidth (in MHz)",
"type": "number",
"default": 40
},
"n_antenna_dl": {
"title": "Number of DL antennas",
"description": "1, 2, 4 or 8. Number of DL antennas.",
"type": "number",
"default": 2
},
"n_antenna_ul": {
"title": "Number of UL antennas",
"description": "1, 2, 4 or 8. Number of UL antennas.",
"type": "number",
"default": 2
},
"tdd_ul_dl_config": {
"title": "TDD",
"description": "TDD",
"type": "string",
"enum": [
"5ms 2UL 7DL 4/6 (default)",
"2.5ms 1UL 3DL 2/10",
"5ms 8UL 3DL 2/10 (maximum uplink)"
],
"default": "5ms 2UL 7DL 4/6 (default)"
},
"dl_nr_arfcn": {
"title": "DL NR ARFCN",
"description": "Downlink NR Absolute Radio Frequency Channel Number of the cell",
"type": "number"
},
"nr_band": {
"title": "NR band",
"description": "NR band number",
"type": "number"
},
"ssb_pos_bitmap": {
"title": "SSB Position Bitmap",
"description": "SSB position bitmap in bits (4, 8 or 64 bits depending on the DL frequency).",
"type": "string",
"default": 10000000
},
"pci": {
"title": "Physical Cell ID",
"description": "Physical Cell ID",
"type": "number",
"default": 500
},
"cell_id": {
"title": "Cell ID",
"description": "Cell ID",
"type": "string",
"default": "0x01"
},
"tx_gain": {
"title": "Tx gain",
"description": "Tx gain (in dB)",
"type": "number"
},
"rx_gain": {
"title": "Rx gain",
"description": "Rx gain (in dB)",
"type": "number"
},
"gnb_id": {
"title": "gNB ID",
"description": "gNB ID",
"type": "string",
"default": "0x12345"
},
"gnb_id_bits": {
"title": "gNB ID bits",
"description": "Number of bits for the gNodeB global identifier. (range 22 to 32)",
"type": "number",
"default": 28
},
"amf_list": {
"title": "AMF list",
"description": "Optionnal. List of AMF to which the gNodeB is connected",
"patternProperties": {
".*": {
"properties": {
"amf_addr": {
"title": "AMF Address",
"description": "IP address (and optional port) of NGAP SCTP connection to the AMF. The default port is 38412.",
"type": "string"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"plmn_list": {
"title": "PLMN list",
"description": "List of PLMNs broadcasted by the gNodeB, at most 12 (default: 00101)",
"patternProperties": {
".*": {
"properties": {
"plmn": {
"default": "00101",
"title": "Public Land Mobile Network",
"description": "Public Land Mobile Network",
"type": "string"
},
"tac": {
"default": 100,
"title": "Tracking Area Code",
"description": "Integer (range 0 to 16777215)",
"type": "number"
},
"ranac": {
"title": "Optional integer (range 0 to 255)",
"description": "RAN Area Code",
"type": "number"
},
"reserved": {
"default": false,
"title": "Reserved",
"description": "True if the cell is reserved for operator use.",
"type": "boolean"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"nssai": {
"title": "AMF slices configuration",
"description": "AMF slices configuration.",
"patternProperties": {
".*": {
"properties": {
"sst": {
"default": 1,
"title": "Slice Service Type",
"description": "Integer (range 1 to 255).",
"type": "number"
},
"sd": {
"default": "0x000032",
"title": "Slice Differentiator",
"description": "Optional integer (range 0 to 0xFFFFFE)",
"type": "string"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"nr_handover_a3_offset": {
"title": "A3 offset for NR handover",
"description": "RSRP gain offset between gNBs which will trigger handover",
"type": "number",
"default": 6
},
"nr_handover_time_to_trigger": {
"title": "Time to Trigger for NR handover",
"description": "Time to triger after which NR handover will be triggerd if A3 offset is reached",
"type": "number",
"enum": [
0,
40,
64,
80,
100,
128,
160,
256,
320,
480,
512,
640,
1024,
1280,
2560,
5120
],
"default": 100
},
"ncell_list": {
"title": "Neighbour Cell Info",
"description": "Neighbour Cell Info",
"patternProperties": {
".*": {
"properties": {
"dl_nr_arfcn": {
"title": "DL NR ARFCN",
"description": "Downlink NR Absolute Radio Frequency Channel Number of the neighbour cell",
"type": "number"
},
"ssb_nr_arfcn": {
"title": "SSB NR ARFCN",
"description": "SSB NR Absolute Radio Frequency Channel Number of the neighbour cell",
"type": "number"
},
"pci": {
"title": "Physical Cell ID",
"description": "Physical Cell ID of the neighbour cell",
"type": "number"
},
"nr_cell_id": {
"title": "NR Cell ID",
"description": "Concatenation of gnb_id and cell_id of the neighbour cell",
"type": "string"
},
"gnb_id_bits": {
"title": "gNB ID bits",
"description": "Number of bits for the gNodeB global identifier. (range 22 to 32)",
"type": "number"
},
"nr_band": {
"title": "NR band",
"description": "NR band number",
"type": "number"
},
"tac": {
"title": "Tracking Area Code",
"description": "Integer (range 0 to 16777215)",
"type": "number"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"xn_peers": {
"title": "XN Peers",
"description": "XN Peers",
"patternProperties": {
".*": {
"properties": {
"xn_addr": {
"title": "XN Address",
"description": "XN Address of the neighbour cell (gNB Address)",
"type": "string"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"websocket_password": {
"title": "Websocket password",
"description": "Activates websocket for remote control and sets password",
"type": "string"
},
"inactivity_timer": {
"title": "Inactivity Timer",
"description": "Send RRC connection release after this time (in ms) of network inactivity.",
"type": "number",
"default": 10000
},
"log_phy_debug": {
"title": "Physical layer log debug",
"description": "Enable debug mode for physical layer logs",
"type": "boolean",
"default": false
},
"gps_sync": {
"default": false,
"title": "GPS synchronisation",
"description": "True if GPS should be used for synchronisation",
"type": "boolean"
},
"disable_sdr": {
"default": false,
"title": "Disable SDR",
"description": "Disables radio",
"type": "boolean"
},
"use_ipv4": {
"default": false,
"title": "Use IPv4",
"description": "Set to true to use IPv4 for AMF / MME addresses",
"type": "boolean"
},
"gnb_stats_fetch_period": {
"title": "gNB statistics fetch period (seconds)",
"description": "Describes how often a call to Amarisoft remote API is made to get gNB statistics",
"type": "number",
"default": 60
},
"gnb_drb_stats_enabled": {
"title": "Enable gNB drb statistics",
"description": "Enable gNB drb statistics through 100Hz polling, needed for E-UTRAN IP Throughput KPI",
"type": "boolean",
"default": true
},
"max_rx_sample_db": {
"title": "Maximum RX sample value (dB)",
"description": "Maximum RX sample threshold above which RX saturated promise will fail",
"type": "number",
"default": 0
},
"min_txrx_delay": {
"title": "Minimum available time for radio front end processing (ms)",
"description": "Minimum TX/RX diff threshold above which baseband latency promise will fail",
"type": "number",
"default": 5
},
"avg_txrx_delay": {
"title": "Average available time for radio front end processing (ms)",
"description": "Average TX/RX diff threshold above which baseband latency promise will fail",
"type": "number",
"default": 7
},
"xlog_fluentbit_forward_host": {
"title": "Address to Forward Xlog by Fluenbit",
"description": "Address of Remote Fluentd or Fluentbit Server to Forward Xlog",
"type": "string"
},
"xlog_fluentbit_forward_port": {
"title": "Port to Forward Xlog by Fluentbit",
"description": "Optional Port of Remote Fluentd or Fluentbit Server to Forward Xlog",
"type": "string"
},
"xlog_fluentbit_forward_shared_key": {
"title": "Shared Key to Forward Xlog by Fluentbit",
"description": "Secret Key Shared with Remote Fluentd or Fluentbit Server for Authentication when Forwarding Xlog",
"type": "string"
}
}
}
software/ors-amarisoft/instance-tdd-m2ru-ue-lte-input-schema.json deleted 100644 → 0
View file @ 8baf732e
{
"type": "object",
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"rue_addr": {
"title": "[Required] Remote UE address",
"description": "[Required] Address of remote UE server. Default port is 2152.",
"type": "string",
"default": ""
},
"tx_gain": {
"title": "Tx gain",
"description": "Tx gain (in dB)",
"type": "number"
},
"rx_gain": {
"title": "Rx gain",
"description": "Rx gain (in dB)",
"type": "number"
},
"dl_earfcn": {
"title": "DL EARFCN",
"description": "Downlink E-UTRA Absolute Radio Frequency Channel Number of the cell",
"type": "number"
},
"bandwidth": {
"title": "Bandwidth",
"description": "Downlink Bandwidth",
"type": "string",
"enum": [
"1.4 MHz",
"3 MHz",
"5 MHz",
"10 MHz",
"15 MHz",
"20 MHz"
],
"default": "20 MHz"
},
"n_antenna_dl": {
"title": "Number of DL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of DL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"n_antenna_ul": {
"title": "Number of UL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of UL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"imsi": {
"title": "IMSI",
"description": "IMSI",
"type": "string",
"default": "001010123456789"
},
"k": {
"title": "K",
"description": "Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
"type": "string",
"default": "00112233445566778899aabbccddeeff"
},
"sim_algo": {
"title": "sim_algo",
"description": "Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
"type": "string",
"default": "milenage"
},
"opc": {
"title": "opc",
"description": "Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
"type": "string",
"default": "milenage"
},
"amf": {
"title": "amf",
"description": "Range: 0 to 65535. Set the Authentication Management Field.",
"type": "string",
"default": "0x9001"
},
"sqn": {
"title": "sqn",
"description": "Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
"type": "string",
"default": "000000000000"
},
"impu": {
"title": "impu",
"description": "Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
"type": "string",
"default": ""
},
"impi": {
"title": "impi",
"description": "String. Defines user IMPI. Must be fully filled with hostname if necessary.",
"type": "string",
"default": ""
}
}
}
software/ors-amarisoft/instance-tdd-m2ru-ue-nr-input-schema.json deleted 100644 → 0
View file @ 8baf732e
{
"type": "object",
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"rue_addr": {
"title": "[Required] Remote UE address",
"description": "[Required] Address of remote UE server. Default port is 2152.",
"type": "string",
"default": ""
},
"tx_gain": {
"title": "Tx gain",
"description": "Tx gain (in dB)",
"type": "number"
},
"rx_gain": {
"title": "Rx gain",
"description": "Rx gain (in dB)",
"type": "number"
},
"dl_nr_arfcn": {
"title": "DL NR ARFCN",
"description": "Downlink NR Absolute Radio Frequency Channel Number of the cell",
"type": "number"
},
"band": {
"title": "NR band",
"description": "NR band number",
"type": "number"
},
"bandwidth": {
"title": "Bandwidth",
"description": "Downlink Bandwidth (in MHz)",
"type": "number",
"default": 40
},
"ssb_nr_arfcn": {
"title": "SSB NR ARFCN",
"description": "SSB NR ARFCN, you can retrieve from ENB/GNB side",
"type": "number"
},
"n_antenna_dl": {
"title": "Number of DL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of DL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"n_antenna_ul": {
"title": "Number of UL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of UL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"imsi": {
"title": "IMSI",
"description": "IMSI",
"type": "string",
"default": "001010123456789"
},
"k": {
"title": "K",
"description": "Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
"type": "string",
"default": "00112233445566778899aabbccddeeff"
},
"sim_algo": {
"title": "sim_algo",
"description": "Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
"type": "string",
"default": "milenage"
},
"opc": {
"title": "opc",
"description": "Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
"type": "string",
"default": "milenage"
},
"amf": {
"title": "amf",
"description": "Range: 0 to 65535. Set the Authentication Management Field.",
"type": "string",
"default": "0x9001"
},
"sqn": {
"title": "sqn",
"description": "Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
"type": "string",
"default": "000000000000"
},
"impu": {
"title": "impu",
"description": "Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
"type": "string",
"default": ""
},
"impi": {
"title": "impi",
"description": "String. Defines user IMPI. Must be fully filled with hostname if necessary.",
"type": "string",
"default": ""
}
}
}
software/ors-amarisoft/instance-tdd-ors-enb-input-schema.json deleted 100644 → 0
View file @ 8baf732e
{
"type": "object",
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"bandwidth": {
"title": "Bandwidth",
"description": "Downlink Bandwidth",
"type": "string",
"enum": [
"1.4 MHz",
"3 MHz",
"5 MHz",
"10 MHz",
"15 MHz",
"20 MHz"
],
"default": "20 MHz"
},
"n_antenna_dl": {
"title": "Number of DL antennas",
"description": "1 or 2. Number of DL antennas.",
"type": "number",
"default": 2
},
"n_antenna_ul": {
"title": "Number of UL antennas",
"description": "1 or 2. Number of UL antennas.",
"type": "number",
"default": 2
},
"tdd_ul_dl_config": {
"title": "TDD",
"description": "TDD",
"type": "string",
"enum": [
"[Configuration 2] 5ms 2UL 6DL (default)",
"[Configuration 6] 5ms 5UL 3DL (maximum uplink)"
],
"default": "5ms 2UL 7DL 4/6 (default)"
},
"dl_earfcn": {
"title": "DL EARFCN",
"description": "Downlink E-UTRA Absolute Radio Frequency Channel Number of the cell",
"type": "number"
},
"pci": {
"title": "Physical Cell ID",
"description": "Physical Cell ID",
"type": "number",
"default": 1
},
"cell_id": {
"title": "Cell ID",
"description": "Cell ID",
"type": "string",
"default": "0x01"
},
"tac": {
"title": "Tracking Area Code",
"description": "Tracking Area Code in hexadecimal representation (range 0x0000 to 0xffff)",
"default": "0x0001",
"type": "string"
},
"root_sequence_index": {
"title": "Root Sequence Index",
"description": "Range: 0 to 837. Set the PRACH root sequence index (SIB2.rootSequenceIndex field). It must be different for each neighbour cell operating on the same frequency and sharing the same PRACH configuration.",
"type": "number",
"default": 204
},
"tx_gain": {
"title": "Tx gain",
"description": "Tx gain (in dB)",
"type": "number"
},
"rx_gain": {
"title": "Rx gain",
"description": "Rx gain (in dB)",
"type": "number"
},
"enb_id": {
"title": "eNB ID",
"description": "eNB ID",
"type": "string",
"default": "0x1A2D0"
},
"gtp_addr": {
"title": "GTP Address",
"description": "String. Set the IP address (and optional port) on which the GTP-U packets are received. The default port is 2152. It is normally the IP address of the network interface connected to the core network.",
"type": "string",
"default": "127.0.1.1"
},
"mme_list": {
"title": "MME list",
"description": "Optionnal. List of MME to which the gNodeB is connected",
"patternProperties": {
".*": {
"properties": {
"mme_addr": {
"title": "MME Address",
"description": "IP address (and optional port) of S1AP SCTP connection to the MME. The default port is 36412.",
"type": "string"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"plmn_list": {
"title": "PLMN list",
"description": "List of PLMNs broadcasted by the eNodeB, at most 6 (default: 00101)",
"patternProperties": {
".*": {
"properties": {
"plmn": {
"default": "00101",
"title": "Public Land Mobile Network",
"description": "Public Land Mobile Network",
"type": "string"
},
"attach_without_pdn": {
"default": false,
"title": "Attach Without PDN",
"description": "Optional boolean. Indicates if PLMN supports attach without PDN connectivity.",
"type": "boolean"
},
"reserved": {
"default": false,
"title": "Reserved",
"description": "True if the cell is reserved for operator use.",
"type": "boolean"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"lte_handover_a3_offset": {
"title": "A3 offset for LTE handover",
"description": "RSRP gain offset between gNBs which will trigger handover",
"type": "number",
"default": 6
},
"lte_handover_time_to_trigger": {
"title": "Time to Trigger for LTE handover",
"description": "Time to triger after which LTE handover will be triggered if A3 offset is reached",
"type": "number",
"enum": [
0,
40,
64,
80,
100,
128,
160,
256,
320,
480,
512,
640,
1024,
1280,
2560,
5120
],
"default": 480
},
"ncell_list": {
"title": "Neighbour Cell Info",
"description": "Neighbour Cell Info",
"patternProperties": {
".*": {
"properties": {
"dl_earfcn": {
"title": "DL EARFCN",
"description": "Downlink E-UTRA Absolute Radio Frequency Channel Number of the neighbour cell",
"type": "number"
},
"pci": {
"title": "Physical Cell ID",
"description": "Physical Cell ID of the neighbour cell",
"type": "number"
},
"cell_id": {
"title": "Cell ID",
"description": "Concatenation of enb_id and cell_id of the neighbour cell",
"type": "string"
},
"tac": {
"title": "Tracking Area Code",
"description": "Integer (range 0 to 16777215)",
"type": "number"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"websocket_password": {
"title": "Websocket password",
"description": "Activates websocket for remote control and sets password",
"type": "string"
},
"inactivity_timer": {
"title": "Inactivity Timer",
"description": "Send RRC connection release after this time (in ms) of network inactivity.",
"type": "number",
"default": 10000
},
"log_phy_debug": {
"title": "Physical layer log debug",
"description": "Enable debug mode for physical layer logs",
"type": "boolean",
"default": false
},
"gps_sync": {
"default": false,
"title": "GPS synchronisation",
"description": "True if GPS should be used for synchronisation",
"type": "boolean"
},
"disable_sdr": {
"default": false,
"title": "Disable SDR",
"description": "Disables radio",
"type": "boolean"
},
"use_ipv4": {
"default": false,
"title": "Use IPv4",
"description": "Set to true to use IPv4 for AMF / MME addresses",
"type": "boolean"
},
"enb_stats_fetch_period": {
"title": "eNB statistics fetch period (seconds)",
"description": "Describes how often a call to Amarisoft remote API is made to get eNB statistics",
"type": "number",
"default": 60
},
"enb_drb_stats_enabled": {
"title": "Enable eNB drb statistics",
"description": "Enable eNB drb statistics through 100Hz polling, needed for E-UTRAN IP Throughput KPI",
"type": "boolean",
"default": true
},
"max_rx_sample_db": {
"title": "Maximum RX sample value (dB)",
"description": "Maximum RX sample threshold above which RX saturated promise will fail",
"type": "number",
"default": 0
},
"min_txrx_delay": {
"title": "Minimum available time for radio front end processing (ms)",
"description": "Baseband latency promise will fail if minimum TX/RX diff reaches threshold (higher than this value)",
"type": "number",
"default": 5
},
"avg_txrx_delay": {
"title": "Average available time for radio front end processing (ms)",
"description": "Baseband latency promise will fail if average TX/RX diff reaches threshold (higher than this value)",
"type": "number",
"default": 7
},
"xlog_fluentbit_forward_host": {
"title": "Address to Forward Xlog by Fluenbit",
"description": "Address of Remote Fluentd or Fluentbit Server to Forward Xlog",
"type": "string"
},
"xlog_fluentbit_forward_port": {
"title": "Port to Forward Xlog by Fluentbit",
"description": "Optional Port of Remote Fluentd or Fluentbit Server to Forward Xlog",
"type": "string"
},
"xlog_fluentbit_forward_shared_key": {
"title": "Shared Key to Forward Xlog by Fluentbit",
"description": "Secret Key Shared with Remote Fluentd or Fluentbit Server for Authentication when Forwarding Xlog",
"type": "string"
}
}
}
software/ors-amarisoft/instance-tdd-ors-gnb-input-schema.json deleted 100644 → 0
View file @ 8baf732e
{
"type": "object",
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"nr_bandwidth": {
"title": "Bandwidth",
"description": "Downlink Bandwidth (in MHz)",
"type": "number",
"default": 40
},
"n_antenna_dl": {
"title": "Number of DL antennas",
"description": "1 or 2. Number of DL antennas.",
"type": "number",
"default": 2
},
"n_antenna_ul": {
"title": "Number of UL antennas",
"description": "1 or 2. Number of UL antennas.",
"type": "number",
"default": 2
},
"tdd_ul_dl_config": {
"title": "TDD",
"description": "TDD",
"type": "string",
"enum": [
"5ms 2UL 7DL 4/6 (default)",
"2.5ms 1UL 3DL 2/10",
"5ms 8UL 3DL 2/10 (maximum uplink)"
],
"default": "5ms 2UL 7DL 4/6 (default)"
},
"dl_nr_arfcn": {
"title": "DL NR ARFCN",
"description": "Downlink NR Absolute Radio Frequency Channel Number of the cell",
"type": "number"
},
"nr_band": {
"title": "NR band",
"description": "NR band number",
"type": "number"
},
"ssb_pos_bitmap": {
"title": "SSB Position Bitmap",
"description": "SSB position bitmap in bits (4, 8 or 64 bits depending on the DL frequency).",
"type": "string",
"default": 10000000
},
"pci": {
"title": "Physical Cell ID",
"description": "Physical Cell ID",
"type": "number",
"default": 500
},
"cell_id": {
"title": "Cell ID",
"description": "Cell ID",
"type": "string",
"default": "0x01"
},
"tx_gain": {
"title": "Tx gain",
"description": "Tx gain (in dB)",
"type": "number"
},
"rx_gain": {
"title": "Rx gain",
"description": "Rx gain (in dB)",
"type": "number"
},
"gnb_id": {
"title": "gNB ID",
"description": "gNB ID",
"type": "string",
"default": "0x12345"
},
"gnb_id_bits": {
"title": "gNB ID bits",
"description": "Number of bits for the gNodeB global identifier. (range 22 to 32)",
"type": "number",
"default": 28
},
"amf_list": {
"title": "AMF list",
"description": "Optionnal. List of AMF to which the gNodeB is connected",
"patternProperties": {
".*": {
"properties": {
"amf_addr": {
"title": "AMF Address",
"description": "IP address (and optional port) of NGAP SCTP connection to the AMF. The default port is 38412.",
"type": "string"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"plmn_list": {
"title": "PLMN list",
"description": "List of PLMNs broadcasted by the gNodeB, at most 12 (default: 00101)",
"patternProperties": {
".*": {
"properties": {
"plmn": {
"default": "00101",
"title": "Public Land Mobile Network",
"description": "Public Land Mobile Network",
"type": "string"
},
"tac": {
"default": 100,
"title": "Tracking Area Code",
"description": "Integer (range 0 to 16777215)",
"type": "number"
},
"ranac": {
"title": "Optional integer (range 0 to 255)",
"description": "RAN Area Code",
"type": "number"
},
"reserved": {
"default": false,
"title": "Reserved",
"description": "True if the cell is reserved for operator use.",
"type": "boolean"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"nssai": {
"title": "AMF slices configuration",
"description": "AMF slices configuration.",
"patternProperties": {
".*": {
"properties": {
"sst": {
"default": 1,
"title": "Slice Service Type",
"description": "Integer (range 1 to 255).",
"type": "number"
},
"sd": {
"default": "0x000032",
"title": "Slice Differentiator",
"description": "Optional integer (range 0 to 0xFFFFFE)",
"type": "string"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"nr_handover_a3_offset": {
"title": "A3 offset for NR handover",
"description": "RSRP gain offset between gNBs which will trigger handover",
"type": "number",
"default": 6
},
"nr_handover_time_to_trigger": {
"title": "Time to Trigger for NR handover",
"description": "Time to triger after which NR handover will be triggerd if A3 offset is reached",
"type": "number",
"enum": [
0,
40,
64,
80,
100,
128,
160,
256,
320,
480,
512,
640,
1024,
1280,
2560,
5120
],
"default": 100
},
"ncell_list": {
"title": "Neighbour Cell Info",
"description": "Neighbour Cell Info",
"patternProperties": {
".*": {
"properties": {
"dl_nr_arfcn": {
"title": "DL NR ARFCN",
"description": "Downlink NR Absolute Radio Frequency Channel Number of the neighbour cell",
"type": "number"
},
"ssb_nr_arfcn": {
"title": "SSB NR ARFCN",
"description": "SSB NR Absolute Radio Frequency Channel Number of the neighbour cell",
"type": "number"
},
"pci": {
"title": "Physical Cell ID",
"description": "Physical Cell ID of the neighbour cell",
"type": "number"
},
"nr_cell_id": {
"title": "NR Cell ID",
"description": "Concatenation of gnb_id and cell_id of the neighbour cell",
"type": "string"
},
"gnb_id_bits": {
"title": "gNB ID bits",
"description": "Number of bits for the gNodeB global identifier. (range 22 to 32)",
"type": "number"
},
"nr_band": {
"title": "NR band",
"description": "NR band number",
"type": "number"
},
"tac": {
"title": "Tracking Area Code",
"description": "Integer (range 0 to 16777215)",
"type": "number"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"xn_peers": {
"title": "XN Peers",
"description": "XN Peers",
"patternProperties": {
".*": {
"properties": {
"xn_addr": {
"title": "XN Address",
"description": "XN Address of the neighbour cell (gNB Address)",
"type": "string"
}
},
"type": "object"
}
},
"type": "object",
"default": {}
},
"websocket_password": {
"title": "Websocket password",
"description": "Activates websocket for remote control and sets password",
"type": "string"
},
"inactivity_timer": {
"title": "Inactivity Timer",
"description": "Send RRC connection release after this time (in ms) of network inactivity.",
"type": "number",
"default": 10000
},
"log_phy_debug": {
"title": "Physical layer log debug",
"description": "Enable debug mode for physical layer logs",
"type": "boolean",
"default": false
},
"gps_sync": {
"default": false,
"title": "GPS synchronisation",
"description": "True if GPS should be used for synchronisation",
"type": "boolean"
},
"disable_sdr": {
"default": false,
"title": "Disable SDR",
"description": "Disables radio",
"type": "boolean"
},
"use_ipv4": {
"default": false,
"title": "Use IPv4",
"description": "Set to true to use IPv4 for AMF / MME addresses",
"type": "boolean"
},
"gnb_stats_fetch_period": {
"title": "gNB statistics fetch period (seconds)",
"description": "Describes how often a call to Amarisoft remote API is made to get gNB statistics",
"type": "number",
"default": 60
},
"gnb_drb_stats_enabled": {
"title": "Enable gNB drb statistics",
"description": "Enable gNB drb statistics through 100Hz polling, needed for E-UTRAN IP Throughput KPI",
"type": "boolean",
"default": true
},
"max_rx_sample_db": {
"title": "Maximum RX sample value (dB)",
"description": "Maximum RX sample threshold above which RX saturated promise will fail",
"type": "number",
"default": 0
},
"min_txrx_delay": {
"title": "Minimum available time for radio front end processing (ms)",
"description": "Minimum TX/RX diff threshold above which baseband latency promise will fail",
"type": "number",
"default": 5
},
"avg_txrx_delay": {
"title": "Average available time for radio front end processing (ms)",
"description": "Average TX/RX diff threshold above which baseband latency promise will fail",
"type": "number",
"default": 7
},
"xlog_fluentbit_forward_host": {
"title": "Address to Forward Xlog by Fluenbit",
"description": "Address of Remote Fluentd or Fluentbit Server to Forward Xlog",
"type": "string"
},
"xlog_fluentbit_forward_port": {
"title": "Port to Forward Xlog by Fluentbit",
"description": "Optional Port of Remote Fluentd or Fluentbit Server to Forward Xlog",
"type": "string"
},
"xlog_fluentbit_forward_shared_key": {
"title": "Shared Key to Forward Xlog by Fluentbit",
"description": "Secret Key Shared with Remote Fluentd or Fluentbit Server for Authentication when Forwarding Xlog",
"type": "string"
}
}
}
software/ors-amarisoft/instance-tdd-ors-ue-lte-input-schema.json deleted 100644 → 0
View file @ 8baf732e
{
"type": "object",
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"rue_addr": {
"title": "[Required] Remote UE address",
"description": "[Required] Address of remote UE server. Default port is 2152.",
"type": "string",
"default": ""
},
"tx_gain": {
"title": "Tx gain",
"description": "Tx gain (in dB)",
"type": "number"
},
"rx_gain": {
"title": "Rx gain",
"description": "Rx gain (in dB)",
"type": "number"
},
"dl_earfcn": {
"title": "DL EARFCN",
"description": "Downlink E-UTRA Absolute Radio Frequency Channel Number of the cell",
"type": "number"
},
"bandwidth": {
"title": "Bandwidth",
"description": "Downlink Bandwidth",
"type": "string",
"enum": [
"1.4 MHz",
"3 MHz",
"5 MHz",
"10 MHz",
"15 MHz",
"20 MHz"
],
"default": "20 MHz"
},
"n_antenna_dl": {
"title": "Number of DL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of DL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"n_antenna_ul": {
"title": "Number of UL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of UL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"imsi": {
"title": "IMSI",
"description": "IMSI",
"type": "string",
"default": "001010123456789"
},
"k": {
"title": "K",
"description": "Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
"type": "string",
"default": "00112233445566778899aabbccddeeff"
},
"sim_algo": {
"title": "sim_algo",
"description": "Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
"type": "string",
"default": "milenage"
},
"opc": {
"title": "opc",
"description": "Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
"type": "string",
"default": "milenage"
},
"amf": {
"title": "amf",
"description": "Range: 0 to 65535. Set the Authentication Management Field.",
"type": "string",
"default": "0x9001"
},
"sqn": {
"title": "sqn",
"description": "Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
"type": "string",
"default": "000000000000"
},
"impu": {
"title": "impu",
"description": "Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
"type": "string",
"default": ""
},
"impi": {
"title": "impi",
"description": "String. Defines user IMPI. Must be fully filled with hostname if necessary.",
"type": "string",
"default": ""
}
}
}
software/ors-amarisoft/instance-tdd-ors-ue-nr-input-schema.json deleted 100644 → 0
View file @ 8baf732e
{
"type": "object",
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"rue_addr": {
"title": "[Required] Remote UE address",
"description": "[Required] Address of remote UE server. Default port is 2152.",
"type": "string",
"default": ""
},
"tx_gain": {
"title": "Tx gain",
"description": "Tx gain (in dB)",
"type": "number"
},
"rx_gain": {
"title": "Rx gain",
"description": "Rx gain (in dB)",
"type": "number"
},
"dl_nr_arfcn": {
"title": "DL NR ARFCN",
"description": "Downlink NR Absolute Radio Frequency Channel Number of the cell",
"type": "number"
},
"band": {
"title": "NR band",
"description": "NR band number",
"type": "number"
},
"bandwidth": {
"title": "Bandwidth",
"description": "Downlink Bandwidth (in MHz)",
"type": "number",
"default": 40
},
"ssb_nr_arfcn": {
"title": "SSB NR ARFCN",
"description": "SSB NR ARFCN, you can retrieve from ENB/GNB side",
"type": "number"
},
"n_antenna_dl": {
"title": "Number of DL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of DL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"n_antenna_ul": {
"title": "Number of UL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of UL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"imsi": {
"title": "IMSI",
"description": "IMSI",
"type": "string",
"default": "001010123456789"
},
"k": {
"title": "K",
"description": "Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
"type": "string",
"default": "00112233445566778899aabbccddeeff"
},
"sim_algo": {
"title": "sim_algo",
"description": "Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
"type": "string",
"default": "milenage"
},
"opc": {
"title": "opc",
"description": "Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
"type": "string",
"default": "milenage"
},
"amf": {
"title": "amf",
"description": "Range: 0 to 65535. Set the Authentication Management Field.",
"type": "string",
"default": "0x9001"
},
"sqn": {
"title": "sqn",
"description": "Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
"type": "string",
"default": "000000000000"
},
"impu": {
"title": "impu",
"description": "Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
"type": "string",
"default": ""
},
"impi": {
"title": "impi",
"description": "String. Defines user IMPI. Must be fully filled with hostname if necessary.",
"type": "string",
"default": ""
}
}
}
software/ors-amarisoft/instance-tdd-ue-lte-input-schema.json deleted 100644 → 0
View file @ 8baf732e
{
"type": "object",
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"rue_addr": {
"title": "[Required] Remote UE address",
"description": "[Required] Address of remote UE server. Default port is 2152.",
"type": "string",
"default": ""
},
"tx_gain": {
"title": "Tx gain",
"description": "Tx gain (in dB)",
"type": "number"
},
"rx_gain": {
"title": "Rx gain",
"description": "Rx gain (in dB)",
"type": "number"
},
"dl_earfcn": {
"title": "DL EARFCN",
"description": "Downlink E-UTRA Absolute Radio Frequency Channel Number of the cell",
"type": "number"
},
"bandwidth": {
"title": "Bandwidth",
"description": "Downlink Bandwidth",
"type": "string",
"enum": [
"1.4 MHz",
"3 MHz",
"5 MHz",
"10 MHz",
"15 MHz",
"20 MHz"
],
"default": "20 MHz"
},
"n_antenna_dl": {
"title": "Number of DL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of DL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"n_antenna_ul": {
"title": "Number of UL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of UL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"imsi": {
"title": "IMSI",
"description": "IMSI",
"type": "string",
"default": "001010123456789"
},
"k": {
"title": "K",
"description": "Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
"type": "string",
"default": "00112233445566778899aabbccddeeff"
},
"sim_algo": {
"title": "sim_algo",
"description": "Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
"type": "string",
"default": "milenage"
},
"opc": {
"title": "opc",
"description": "Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
"type": "string",
"default": "milenage"
},
"amf": {
"title": "amf",
"description": "Range: 0 to 65535. Set the Authentication Management Field.",
"type": "string",
"default": "0x9001"
},
"sqn": {
"title": "sqn",
"description": "Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
"type": "string",
"default": "000000000000"
},
"impu": {
"title": "impu",
"description": "Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
"type": "string",
"default": ""
},
"impi": {
"title": "impi",
"description": "String. Defines user IMPI. Must be fully filled with hostname if necessary.",
"type": "string",
"default": ""
}
}
}
software/ors-amarisoft/instance-tdd-ue-nr-input-schema.json deleted 100644 → 0
View file @ 8baf732e
{
"type": "object",
"$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters",
"properties": {
"rue_addr": {
"title": "[Required] Remote UE address",
"description": "[Required] Address of remote UE server. Default port is 2152.",
"type": "string",
"default": ""
},
"tx_gain": {
"title": "Tx gain",
"description": "Tx gain (in dB)",
"type": "number"
},
"rx_gain": {
"title": "Rx gain",
"description": "Rx gain (in dB)",
"type": "number"
},
"dl_nr_arfcn": {
"title": "DL NR ARFCN",
"description": "Downlink NR Absolute Radio Frequency Channel Number of the cell",
"type": "number"
},
"band": {
"title": "NR band",
"description": "NR band number",
"type": "number"
},
"bandwidth": {
"title": "Bandwidth",
"description": "Downlink Bandwidth (in MHz)",
"type": "number",
"default": 40
},
"ssb_nr_arfcn": {
"title": "SSB NR ARFCN",
"description": "SSB NR ARFCN, you can retrieve from ENB/GNB side",
"type": "number"
},
"n_antenna_dl": {
"title": "Number of DL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of DL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"n_antenna_ul": {
"title": "Number of UL antennas",
"description": "Enumeration: 1, 2, 4 or 8. Number of UL antennas. It must be the same for all NB-IoT and LTE cells sharing the same RF port.",
"type": "number",
"default": 2
},
"imsi": {
"title": "IMSI",
"description": "IMSI",
"type": "string",
"default": "001010123456789"
},
"k": {
"title": "K",
"description": "Set the user secret key (as a 16 bytes hexadecimal string, or eventually 32 bytes hexadecimal string for TUAK).",
"type": "string",
"default": "00112233445566778899aabbccddeeff"
},
"sim_algo": {
"title": "sim_algo",
"description": "Optional enumeration. xor, milenage or tuak (default = milenage). Set the USIM authentication algorithm. Note: test USIM cards use the XOR algorithm.",
"type": "string",
"default": "milenage"
},
"opc": {
"title": "opc",
"description": "Optional string. Operator key preprocessed with the user secret key (as a 16 byte hexadecimal string). When the Milenage authentication algorithm is used, either op or opc must be set.",
"type": "string",
"default": "milenage"
},
"amf": {
"title": "amf",
"description": "Range: 0 to 65535. Set the Authentication Management Field.",
"type": "string",
"default": "0x9001"
},
"sqn": {
"title": "sqn",
"description": "Optional String (6 byte hexadecimal string). Default = '000000000000'. Set the initial sequence number. For the XOR algorithm, the actual value does not matter. For the Milenage or TUAK algorithm, a sequence number resynchronization is initiated if the sequence number does not match the one stored in the USIM.",
"type": "string",
"default": "000000000000"
},
"impu": {
"title": "impu",
"description": "Array of string or object. Each string represent an IMPU and can be a sip URI or a telephone number.",
"type": "string",
"default": ""
},
"impi": {
"title": "impi",
"description": "String. Defines user IMPI. Must be fully filled with hostname if necessary.",
"type": "string",
"default": ""
}
}
}
software/ors-amarisoft/software-tdd-m2ru.cfg deleted 100644 → 0
View file @ 8baf732e
# This file was generated using a jinja2 template and the render-templates script, don't modify directly.
[buildout]
extends =
software-base.cfg
[default-params]
default-lte-bandwidth = 20 MHz
default-lte-inactivity-timer = 10000
default-lte-imsi = 001010123456789
default-lte-k = 00112233445566778899aabbccddeeff
default-nr-bandwidth = 40
default-nr-ssb-pos-bitmap = 10000000
default-nr-inactivity-timer = 10000
default-nr-imsi = 001010123456789
default-nr-k = 00112233445566778899aabbccddeeff
default-n-antenna-dl = 2
default-n-antenna-ul = 2
[rf-mode]
software-name = tdd-m2ru
rf-mode = tdd
trx = cpri
bbu = server
ru = m2ru
software/ors-amarisoft/software-tdd-m2ru.cfg.json deleted 100644 → 0
View file @ 8baf732e
{
"name": "ORS Amarisoft",
"description": "4G and 5G amarisoft stack for ORS",
"serialisation": "json-in-xml",
"software-type": {
"ue-lte": {
"title": "UE-LTE",
"description": "UE LTE Configuration",
"software-type": "ue-lte",
"request": "instance-tdd-m2ru-ue-lte-input-schema.json",
"response": "instance-tdd-m2ru-ue-lte-schema.json",
"index": 4
},
"ue-nr": {
"title": "UE-NR",
"description": "UE NR Configuration",
"software-type": "ue-nr",
"request": "instance-tdd-m2ru-ue-nr-input-schema.json",
"response": "instance-tdd-m2ru-ue-nr-schema.json",
"index": 5
},
"enb": {
"title": "eNB",
"software-type": "enb",
"description": "eNodeB Configuration",
"request": "instance-tdd-m2ru-enb-input-schema.json",
"response": "instance-tdd-m2ru-enb-schema.json",
"index": 0
},
"gnb": {
"title": "gNB",
"software-type": "gnb",
"description": "gNodeB Configuration",
"request": "instance-tdd-m2ru-gnb-input-schema.json",
"response": "instance-tdd-m2ru-gnb-schema.json",
"index": 1
},
"core-network": {
"title": "Core Network",
"software-type": "core-network",
"description": "Core Network Configuration",
"request": "instance-core-network-input-schema.json",
"response": "instance-core-network-schema.json",
"index": 2
},
"core-network-slave": {
"title": "Core Network Sim Card",
"description": "Core Network Sim Card Configuration",
"software-type": "core-network",
"request": "instance-core-network-slave-input-schema.json",
"response": "instance-core-network-slave-schema.json",
"shared": true,
"index": 3
}
}
}
software/ors-amarisoft/software-tdd-ors.cfg deleted 100644 → 0
View file @ 8baf732e
# This file was generated using a jinja2 template and the render-templates script, don't modify directly.
[buildout]
extends =
software-base.cfg
[default-params]
default-lte-bandwidth = 20 MHz
default-lte-inactivity-timer = 10000
default-lte-imsi = 001010123456789
default-lte-k = 00112233445566778899aabbccddeeff
default-nr-bandwidth = 40
default-nr-ssb-pos-bitmap = 10000000
default-nr-inactivity-timer = 10000
default-nr-imsi = 001010123456789
default-nr-k = 00112233445566778899aabbccddeeff
default-n-antenna-dl = 2
default-n-antenna-ul = 2
[rf-mode]
software-name = tdd-ors
rf-mode = tdd
trx = sdr
bbu = ors
ru = ors
software/ors-amarisoft/software-tdd-ors.cfg.json deleted 100644 → 0
View file @ 8baf732e
{
"name": "ORS Amarisoft",
"description": "4G and 5G amarisoft stack for ORS",
"serialisation": "json-in-xml",
"software-type": {
"enb": {
"title": "eNB",
"software-type": "enb",
"description": "eNodeB Configuration",
"request": "instance-tdd-ors-enb-input-schema.json",
"response": "instance-tdd-ors-enb-schema.json",
"index": 0
},
"gnb": {
"title": "gNB",
"software-type": "gnb",
"description": "gNodeB Configuration",
"request": "instance-tdd-ors-gnb-input-schema.json",
"response": "instance-tdd-ors-gnb-schema.json",
"index": 1
},
"core-network": {
"title": "Core Network",
"software-type": "core-network",
"description": "Core Network Configuration",
"request": "instance-core-network-input-schema.json",
"response": "instance-core-network-schema.json",
"index": 2
},
"core-network-slave": {
"title": "Core Network Sim Card",
"description": "Core Network Sim Card Configuration",
"software-type": "core-network",
"request": "instance-core-network-slave-input-schema.json",
"response": "instance-core-network-slave-schema.json",
"shared": true,
"index": 3
}
}
}
software/ors-amarisoft/software-tdd.cfg deleted 100644 → 0
View file @ 8baf732e
# This file was generated using a jinja2 template and the render-templates script, don't modify directly.
[buildout]
extends =
software-base.cfg
[default-params]
default-lte-bandwidth = 20 MHz
default-lte-inactivity-timer = 10000
default-lte-imsi = 001010123456789
default-lte-k = 00112233445566778899aabbccddeeff
default-nr-bandwidth = 40
default-nr-ssb-pos-bitmap = 10000000
default-nr-inactivity-timer = 10000
default-nr-imsi = 001010123456789
default-nr-k = 00112233445566778899aabbccddeeff
default-n-antenna-dl = 2
default-n-antenna-ul = 2
[rf-mode]
software-name = tdd
rf-mode = tdd
trx = sdr
bbu = server
ru = any
software/ors-amarisoft/software-tdd.cfg.json deleted 100644 → 0
View file @ 8baf732e
{
"name": "ORS Amarisoft",
"description": "4G and 5G amarisoft stack for ORS",
"serialisation": "json-in-xml",
"software-type": {
"ue-lte": {
"title": "UE-LTE",
"description": "UE LTE Configuration",
"software-type": "ue-lte",
"request": "instance-tdd-ue-lte-input-schema.json",
"response": "instance-tdd-ue-lte-schema.json",
"index": 4
},
"ue-nr": {
"title": "UE-NR",
"description": "UE NR Configuration",
"software-type": "ue-nr",
"request": "instance-tdd-ue-nr-input-schema.json",
"response": "instance-tdd-ue-nr-schema.json",
"index": 5
},
"enb": {
"title": "eNB",
"software-type": "enb",
"description": "eNodeB Configuration",
"request": "instance-tdd-enb-input-schema.json",
"response": "instance-tdd-enb-schema.json",
"index": 0
},
"gnb": {
"title": "gNB",
"software-type": "gnb",
"description": "gNodeB Configuration",
"request": "instance-tdd-gnb-input-schema.json",
"response": "instance-tdd-gnb-schema.json",
"index": 1
},
"core-network": {
"title": "Core Network",
"software-type": "core-network",
"description": "Core Network Configuration",
"request": "instance-core-network-input-schema.json",
"response": "instance-core-network-schema.json",
"index": 2
},
"core-network-slave": {
"title": "Core Network Sim Card",
"description": "Core Network Sim Card Configuration",
"software-type": "core-network",
"request": "instance-core-network-slave-input-schema.json",
"response": "instance-core-network-slave-schema.json",
"shared": true,
"index": 3
}
}
}
software/ors-amarisoft/test/testTDD-M2RU.py deleted 100644 → 0
View file @ 8baf732e
##############################################################################
#
# Copyright (c) 2018 Nexedi SA and Contributors. All Rights Reserved.
#
# WARNING: This program as such is intended to be used by professional
# programmers who take the whole responsibility of assessing all potential
# consequences resulting from its eventual inadequacies and bugs
# End users who are looking for a ready-to-use solution with commercial
# guarantees and support are strongly adviced to contract a Free Software
# Service Company
#
# This program is Free Software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
##############################################################################
import os
import yaml
import json
import glob
import requests
from slapos.testing.testcase import makeModuleSetUpAndTestCaseClass
setUpModule, ORSTestCase = makeModuleSetUpAndTestCaseClass(
os.path.abspath(
os.path.join(os.path.dirname(__file__), '..', 'software-tdd-m2ru.cfg')))
param_dict = {
'testing': True,
'sim_algo': 'milenage',
'imsi': '001010000000331',
'opc': '000102030405060708090A0B0C0D0E0F',
'amf': '0x9001',
'sqn': '000000000000',
'k': '00112233445566778899AABBCCDDEEFF',
'impu': 'impu331',
'impi': 'impi331@amarisoft.com',
'tx_gain': 17,
'rx_gain': 17,
'dl_earfcn': 325320,
'bandwidth': "10 MHz",
'enb_id': '0x17',
'pci': 250,
'tac': '0x1717',
'root_sequence_index': '1',
'mme_list': {
'10.0.0.1': {'mme_addr': '10.0.0.1'},
'2001:db8::1': {'mme_addr': '2001:db8::1'},
},
'core_network_plmn': '00102',
'dl_nr_arfcn': 325320,
'nr_band': 99,
'nr_bandwidth': 50,
'ssb_nr_arfcn': 377790,
'rue_addr': '192.168.99.88',
'n_antenna_dl': 2,
'n_antenna_ul': 2,
'inactivity_timer': 17,
'gnb_id': '0x17',
'gnb_id_bits': 30,
'ssb_pos_bitmap': '10',
'amf_list': {
'10.0.0.1': {'amf_addr': '10.0.0.1'},
'2001:db8::1': {'amf_addr': '2001:db8::1'},
},
'nr_handover_time_to_trigger': 40,
'nr_handover_a3_offset': 10,
'ncell_list': {
'ORS1': {
'dl_earfcn': 100000,
'dl_nr_arfcn': 100000,
'ssb_nr_arfcn': 100000,
'pci': 1,
'nr_cell_id': '0x0000001',
'cell_id': '0x0000001',
'gnb_id_bits': 28,
'nr_band': 1,
'tac': 1
},
'ORS2': {
'dl_earfcn': 200000,
'dl_nr_arfcn': 200000,
'ssb_nr_arfcn': 200000,
'pci': 2,
'nr_cell_id': '0x0000002',
'cell_id': '0x0000001',
'gnb_id_bits': 30,
'nr_band': 2,
'tac': 2
},
},
'xn_peers': {
'2001:db8::1': {
'xn_addr': '2001:db8::1',
},
'2001:db8::2': {
'xn_addr': '2001:db8::2',
},
},
}
enb_param_dict = {
'plmn_list': {
'00101': {'attach_without_pdn': True, 'plmn': '00101', 'reserved': True},
'00102': {'attach_without_pdn': False, 'plmn': '00102', 'reserved': False},
},
'tdd_ul_dl_config': '[Configuration 6] 5ms 5UL 3DL (maximum uplink)',
}
gnb_param_dict1 = {
'plmn_list': {
'00101': {'plmn': '00101', 'ranac': 1, 'reserved': True, 'tac': 1},
'00102': {'plmn': '00102', 'ranac': 2, 'reserved': False, 'tac': 2},
},
'tdd_ul_dl_config': '2.5ms 1UL 3DL 2/10',
}
gnb_param_dict2 = {
'nssai': {
'0x171717': {'sd': '0x171717', 'sst': 10},
'0x181818': {'sd': '0x181818', 'sst': 20},
},
'tdd_ul_dl_config': '2.5ms 1UL 3DL 2/10',
}
enb_param_dict.update(param_dict)
gnb_param_dict1.update(param_dict)
gnb_param_dict2.update(param_dict)
def test_enb_conf(self):
conf_file = glob.glob(os.path.join(
self.slap.instance_directory, '*', 'etc', 'enb.cfg'))[0]
with open(conf_file, 'r') as f:
conf = yaml.load(f)
if 'tx_gain' in conf and 'rx_gain' in conf:
self.assertEqual(conf['tx_gain'], enb_param_dict['tx_gain'])
self.assertEqual(conf['rx_gain'], enb_param_dict['rx_gain'])
self.assertEqual(conf['cell_default']['inactivity_timer'], enb_param_dict['inactivity_timer'])
self.assertEqual(conf['cell_default']['uldl_config'], 6)
self.assertEqual(conf['cell_list'][0]['dl_earfcn'], enb_param_dict['dl_earfcn'])
self.assertEqual(conf['enb_id'], int(enb_param_dict['enb_id'], 16))
self.assertEqual(conf['cell_list'][0]['n_id_cell'], enb_param_dict['pci'])
self.assertEqual(conf['cell_list'][0]['tac'], int(enb_param_dict['tac'], 16))
self.assertEqual(conf['cell_list'][0]['root_sequence_index'], int(enb_param_dict['root_sequence_index']))
self.assertEqual(conf['cell_list'][0]['cell_id'], 0)
for p in conf['cell_default']['plmn_list']:
for n in "plmn attach_without_pdn reserved".split():
self.assertEqual(p[n], enb_param_dict['plmn_list'][p['plmn']][n])
for p in conf['mme_list']:
self.assertEqual(p['mme_addr'], enb_param_dict['mme_list'][p['mme_addr']]['mme_addr'])
for p in conf['cell_list'][0]['ncell_list']:
for k in enb_param_dict['ncell_list']:
if p['dl_earfcn'] == gnb_param_dict1['ncell_list'][k]['dl_earfcn']:
break
conf_ncell = enb_param_dict['ncell_list'][k]
self.assertEqual(p['dl_earfcn'], conf_ncell['dl_earfcn'])
self.assertEqual(p['n_id_cell'], conf_ncell['pci'])
self.assertEqual(p['cell_id'], int(conf_ncell['cell_id'], 16))
self.assertEqual(p['tac'], conf_ncell['tac'])
with open(conf_file, 'r') as f:
for l in f:
if l.startswith('#define N_RB_DL'):
self.assertIn('50', l)
def test_gnb_conf1(self):
conf_file = glob.glob(os.path.join(
self.slap.instance_directory, '*', 'etc', 'gnb.cfg'))[0]
with open(conf_file, 'r') as f:
conf = yaml.load(f)
self.assertEqual(conf['tx_gain'], gnb_param_dict1['tx_gain'])
self.assertEqual(conf['rx_gain'], gnb_param_dict1['rx_gain'])
self.assertEqual(conf['nr_cell_default']['inactivity_timer'], gnb_param_dict1['inactivity_timer'])
self.assertEqual(conf['nr_cell_list'][0]['dl_nr_arfcn'], gnb_param_dict1['dl_nr_arfcn'])
self.assertEqual(conf['nr_cell_list'][0]['band'], gnb_param_dict1['nr_band'])
self.assertEqual(conf['nr_cell_list'][0]['ssb_pos_bitmap'], gnb_param_dict1['ssb_pos_bitmap'])
self.assertEqual(conf['nr_cell_default']['n_id_cell'], gnb_param_dict1['pci'])
self.assertEqual(conf['gnb_id'], int(gnb_param_dict1['gnb_id'], 16))
self.assertEqual(conf['gnb_id_bits'], gnb_param_dict1['gnb_id_bits'])
for p in conf['nr_cell_default']['plmn_list']:
for n in "plmn ranac reserved tac".split():
self.assertEqual(p[n], gnb_param_dict1['plmn_list'][p['plmn']][n])
for p in conf['amf_list']:
self.assertEqual(p['amf_addr'], gnb_param_dict1['amf_list'][p['amf_addr']]['amf_addr'])
for p in conf['xn_peers']:
self.assertEqual(p, gnb_param_dict1['xn_peers'][p]['xn_addr'])
for p in conf['nr_cell_list'][0]['ncell_list']:
for k in gnb_param_dict1['ncell_list']:
if p['dl_nr_arfcn'] == gnb_param_dict1['ncell_list'][k]['dl_nr_arfcn']:
break
conf_ncell = gnb_param_dict1['ncell_list'][k]
self.assertEqual(p['dl_nr_arfcn'], conf_ncell['dl_nr_arfcn'])
self.assertEqual(p['ssb_nr_arfcn'], conf_ncell['ssb_nr_arfcn'])
self.assertEqual(p['ul_nr_arfcn'], conf_ncell['dl_nr_arfcn'])
self.assertEqual(p['n_id_cell'], conf_ncell['pci'])
self.assertEqual(p['gnb_id_bits'], conf_ncell['gnb_id_bits'])
self.assertEqual(p['nr_cell_id'], int(conf_ncell['nr_cell_id'], 16))
self.assertEqual(p['tac'], conf_ncell['tac'])
self.assertEqual(p['band'], conf_ncell['nr_band'])
tdd_config = conf['nr_cell_default']['tdd_ul_dl_config']['pattern1']
self.assertEqual(float(tdd_config['period']), 2.5)
self.assertEqual(int(tdd_config['dl_slots']), 3)
self.assertEqual(int(tdd_config['dl_symbols']), 10)
self.assertEqual(int(tdd_config['ul_slots']), 1)
self.assertEqual(int(tdd_config['ul_symbols']), 2)
with open(conf_file, 'r') as f:
for l in f:
if l.startswith('#define NR_BANDWIDTH'):
self.assertIn(str(gnb_param_dict1['nr_bandwidth']), l)
def test_gnb_conf2(self):
conf_file = glob.glob(os.path.join(
self.slap.instance_directory, '*', 'etc', 'gnb.cfg'))[0]
with open(conf_file, 'r') as f:
conf = yaml.load(f)
for p in conf['nr_cell_default']['plmn_list'][0]['nssai']:
sd = hex(p['sd'])
self.assertEqual(sd, gnb_param_dict2['nssai'][sd]['sd'], 16)
self.assertEqual(p['sst'], gnb_param_dict2['nssai'][sd]['sst'])
def test_mme_conf(self):
conf_file = glob.glob(os.path.join(
self.slap.instance_directory, '*', 'etc', 'mme.cfg'))[0]
with open(conf_file, 'r') as f:
conf = yaml.load(f)
self.assertEqual(conf['plmn'], param_dict['core_network_plmn'])
def test_sim_card(self):
conf_file = glob.glob(os.path.join(
self.slap.instance_directory, '*', 'etc', 'ue_db.cfg'))[0]
with open(conf_file, 'r') as f:
conf = yaml.load(f)
for n in "sim_algo imsi opc sqn impu impi".split():
self.assertEqual(conf['ue_db'][0][n], param_dict[n])
self.assertEqual(conf['ue_db'][0]['K'], param_dict['k'])
self.assertEqual(conf['ue_db'][0]['amf'], int(param_dict['amf'], 16))
p = self.requestSlaveInstance().getConnectionParameterDict()
p = p['_'] if '_' in p else p
self.assertIn('info', p)
def test_monitor_gadget_url(self):
parameters = json.loads(self.computer_partition.getConnectionParameterDict()['_'])
self.assertIn('monitor-gadget-url', parameters)
monitor_setup_url = parameters['monitor-setup-url']
monitor_gadget_url = parameters['monitor-gadget-url']
monitor_base_url = parameters['monitor-base-url']
public_url = monitor_base_url + '/public'
response = requests.get(public_url, verify=False)
self.assertEqual(requests.codes['OK'], response.status_code)
self.assertIn('software.cfg.html', monitor_gadget_url)
response = requests.get(monitor_gadget_url, verify=False)
self.assertEqual(requests.codes['OK'], response.status_code)
self.assertIn('<script src="rsvp.js"></script>', response.text)
self.assertIn('<script src="renderjs.js"></script>', response.text)
self.assertIn('<script src="g-chart.line.js"></script>', response.text)
self.assertIn('<script src="promise.gadget.js"></script>', response.text)
class TestENBParameters(ORSTestCase):
@classmethod
def getInstanceParameterDict(cls):
return {'_': json.dumps(enb_param_dict)}
@classmethod
def getInstanceSoftwareType(cls):
return "enb"
def test_enb_conf(self):
test_enb_conf(self)
class TestGNBParameters1(ORSTestCase):
@classmethod
def getInstanceParameterDict(cls):
return {'_': json.dumps(gnb_param_dict1)}
@classmethod
def getInstanceSoftwareType(cls):
return "gnb"
def test_gnb_conf(self):
test_gnb_conf1(self)
class TestGNBParameters2(ORSTestCase):
@classmethod
def getInstanceParameterDict(cls):
return {'_': json.dumps(gnb_param_dict2)}
@classmethod
def getInstanceSoftwareType(cls):
return "gnb"
def test_gnb_conf(self):
test_gnb_conf2(self)
class TestCoreNetworkParameters(ORSTestCase):
@classmethod
def getInstanceParameterDict(cls):
return {'_': json.dumps(param_dict)}
@classmethod
def getInstanceSoftwareType(cls):
return "core-network"
def test_mme_conf(self):
test_mme_conf(self)
def requestSlaveInstance(cls):
software_url = cls.getSoftwareURL()
return cls.slap.request(
software_release=software_url,
partition_reference="SIM-CARD",
partition_parameter_kw={'_': json.dumps(param_dict)},
shared=True,
software_type='core-network',
)
class TestENBMonitorGadgetUrl(ORSTestCase):
@classmethod
def getInstanceParameterDict(cls):
return {'_': json.dumps(enb_param_dict)}
@classmethod
def getInstanceSoftwareType(cls):
return "enb"
def test_monitor_gadget_url(self):
test_monitor_gadget_url(self)
class TestGNBMonitorGadgetUrl(ORSTestCase):
@classmethod
def getInstanceParameterDict(cls):
return {'_': json.dumps(gnb_param_dict1)}
@classmethod
def getInstanceSoftwareType(cls):
return "gnb"
def test_monitor_gadget_url(self):
test_monitor_gadget_url(self)
class TestCoreNetworkMonitorGadgetUrl(ORSTestCase):
@classmethod
def getInstanceParameterDict(cls):
return {'_': json.dumps({'testing': True, 'slave-list': []})}
@classmethod
def getInstanceSoftwareType(cls):
return "core-network"
def test_monitor_gadget_url(self):
test_monitor_gadget_url(self)
class TestUELTEMonitorGadgetUrl(ORSTestCase):
@classmethod
def getInstanceParameterDict(cls):
return {'_': json.dumps({'testing': True})}
@classmethod
def getInstanceSoftwareType(cls):
return "ue-lte"
def test_monitor_gadget_url(self):
test_monitor_gadget_url(self)
class TestUENRMonitorGadgetUrl(ORSTestCase):
@classmethod
def getInstanceParameterDict(cls):
return {'_': json.dumps({'testing': True})}
@classmethod
def getInstanceSoftwareType(cls):
return "ue-nr"
def test_monitor_gadget_url(self):
test_monitor_gadget_url(self)
class TestSimCard(ORSTestCase):
@classmethod
def requestDefaultInstance(cls, state='started'):
default_instance = super(
ORSTestCase, cls).requestDefaultInstance(state=state)
cls.requestSlaveInstance()
return default_instance
@classmethod
def requestSlaveInstance(cls):
return requestSlaveInstance(cls)
@classmethod
def getInstanceParameterDict(cls):
return {'_': json.dumps({'testing': True})}
@classmethod
def getInstanceSoftwareType(cls):
return "core-network"
def test_sim_card(self):
test_sim_card(self)
class TestUELTEParameters(ORSTestCase):
@classmethod
def getInstanceParameterDict(cls):
return {'_': json.dumps(param_dict)}
@classmethod
def getInstanceSoftwareType(cls):
return "ue-lte"
def test_ue_lte_conf(self):
conf_file = glob.glob(os.path.join(
self.slap.instance_directory, '*', 'etc', 'ue.cfg'))[0]
with open(conf_file, 'r') as f:
conf = yaml.load(f)
self.assertEqual(conf['cell_groups'][0]['cells'][0]['dl_earfcn'], param_dict['dl_earfcn'])
self.assertEqual(conf['cell_groups'][0]['cells'][0]['n_antenna_dl'], param_dict['n_antenna_dl'])
self.assertEqual(conf['cell_groups'][0]['cells'][0]['n_antenna_ul'], param_dict['n_antenna_ul'])
self.assertEqual(conf['ue_list'][0]['rue_addr'], param_dict['rue_addr'])
self.assertEqual(conf['ue_list'][0]['imsi'], param_dict['imsi'])
self.assertEqual(conf['ue_list'][0]['K'], param_dict['k'])
self.assertEqual(conf['ue_list'][0]['sim_algo'], param_dict['sim_algo'])
self.assertEqual(conf['ue_list'][0]['opc'], param_dict['opc'])
self.assertEqual(conf['ue_list'][0]['amf'], int(param_dict['amf'], 16))
self.assertEqual(conf['ue_list'][0]['sqn'], param_dict['sqn'])
self.assertEqual(conf['ue_list'][0]['impu'], param_dict['impu'])
self.assertEqual(conf['ue_list'][0]['impi'], param_dict['impi'])
self.assertEqual(conf['tx_gain'], param_dict['tx_gain'])
self.assertEqual(conf['rx_gain'], param_dict['rx_gain'])
with open(conf_file, 'r') as f:
for l in f:
if l.startswith('#define N_RB_DL'):
self.assertIn('50', l)
class TestUENRParameters(ORSTestCase):
@classmethod
def getInstanceParameterDict(cls):
return {'_': json.dumps(param_dict)}
@classmethod
def getInstanceSoftwareType(cls):
return "ue-nr"
def test_ue_nr_conf(self):
conf_file = glob.glob(os.path.join(
self.slap.instance_directory, '*', 'etc', 'ue.cfg'))[0]
with open(conf_file, 'r') as f:
conf = yaml.load(f)
self.assertEqual(conf['cell_groups'][0]['cells'][0]['ssb_nr_arfcn'], param_dict['ssb_nr_arfcn'])
self.assertEqual(conf['cell_groups'][0]['cells'][0]['dl_nr_arfcn'], param_dict['dl_nr_arfcn'])
self.assertEqual(conf['cell_groups'][0]['cells'][0]['bandwidth'], '10 MHz')
self.assertEqual(conf['cell_groups'][0]['cells'][0]['band'], param_dict['nr_band'])
self.assertEqual(conf['cell_groups'][0]['cells'][0]['n_antenna_dl'], param_dict['n_antenna_dl'])
self.assertEqual(conf['cell_groups'][0]['cells'][0]['n_antenna_ul'], param_dict['n_antenna_ul'])
self.assertEqual(conf['ue_list'][0]['rue_addr'], param_dict['rue_addr'])
self.assertEqual(conf['ue_list'][0]['imsi'], param_dict['imsi'])
self.assertEqual(conf['ue_list'][0]['K'], param_dict['k'])
self.assertEqual(conf['ue_list'][0]['sim_algo'], param_dict['sim_algo'])
self.assertEqual(conf['ue_list'][0]['opc'], param_dict['opc'])
self.assertEqual(conf['ue_list'][0]['amf'], int(param_dict['amf'], 16))
self.assertEqual(conf['ue_list'][0]['sqn'], param_dict['sqn'])
self.assertEqual(conf['ue_list'][0]['impu'], param_dict['impu'])
self.assertEqual(conf['ue_list'][0]['impi'], param_dict['impi'])
self.assertEqual(conf['tx_gain'], param_dict['tx_gain'])
self.assertEqual(conf['rx_gain'], param_dict['rx_gain'])
software/ors-amarisoft/test/testTDD-ORS.py deleted 100644 → 0
View file @ 8baf732e
##############################################################################
#
# Copyright (c) 2018 Nexedi SA and Contributors. All Rights Reserved.
#
# WARNING: This program as such is intended to be used by professional
# programmers who take the whole responsibility of assessing all potential
# consequences resulting from its eventual inadequacies and bugs
# End users who are looking for a ready-to-use solution with commercial
# guarantees and support are strongly adviced to contract a Free Software
# Service Company
#
# This program is Free Software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
##############################################################################
import os
import yaml
import json
import glob
import requests
from slapos.testing.testcase import makeModuleSetUpAndTestCaseClass
setUpModule, ORSTestCase = makeModuleSetUpAndTestCaseClass(
os.path.abspath(
os.path.join(os.path.dirname(__file__), '..', 'software-tdd-ors.cfg')))
param_dict = {
'testing': True,
'sim_algo': 'milenage',
'imsi': '001010000000331',
'opc': '000102030405060708090A0B0C0D0E0F',
'amf': '0x9001',
'sqn': '000000000000',
'k': '00112233445566778899AABBCCDDEEFF',
'impu': 'impu331',
'impi': 'impi331@amarisoft.com',
'tx_gain': 17,
'rx_gain': 17,
'dl_earfcn': 325320,
'bandwidth': "10 MHz",
'enb_id': '0x17',
'pci': 250,
'tac': '0x1717',
'root_sequence_index': '1',
'mme_list': {
'10.0.0.1': {'mme_addr': '10.0.0.1'},
'2001:db8::1': {'mme_addr': '2001:db8::1'},
},
'core_network_plmn': '00102',
'dl_nr_arfcn': 325320,
'nr_band': 99,
'nr_bandwidth': 50,
'ssb_nr_arfcn': 377790,
'rue_addr': '192.168.99.88',
'n_antenna_dl': 2,
'n_antenna_ul': 2,
'inactivity_timer': 17,
'gnb_id': '0x17',
'gnb_id_bits': 30,
'ssb_pos_bitmap': '10',
'amf_list': {
'10.0.0.1': {'amf_addr': '10.0.0.1'},
'2001:db8::1': {'amf_addr': '2001:db8::1'},
},
'nr_handover_time_to_trigger': 40,
'nr_handover_a3_offset': 10,
'ncell_list': {
'ORS1': {
'dl_earfcn': 100000,
'dl_nr_arfcn': 100000,
'ssb_nr_arfcn': 100000,
'pci': 1,
'nr_cell_id': '0x0000001',
'cell_id': '0x0000001',
'gnb_id_bits': 28,
'nr_band': 1,
'tac': 1
},
'ORS2': {
'dl_earfcn': 200000,
'dl_nr_arfcn': 200000,
'ssb_nr_arfcn': 200000,
'pci': 2,
'nr_cell_id': '0x0000002',
'cell_id': '0x0000001',
'gnb_id_bits': 30,
'nr_band': 2,
'tac': 2
},
},
'xn_peers': {
'2001:db8::1': {
'xn_addr': '2001:db8::1',
},
'2001:db8::2': {
'xn_addr': '2001:db8::2',
},
},
}
enb_param_dict = {
'plmn_list': {
'00101': {'attach_without_pdn': True, 'plmn': '00101', 'reserved': True},
'00102': {'attach_without_pdn': False, 'plmn': '00102', 'reserved': False},
},
'tdd_ul_dl_config': '[Configuration 6] 5ms 5UL 3DL (maximum uplink)',
}
gnb_param_dict1 = {
'plmn_list': {
'00101': {'plmn': '00101', 'ranac': 1, 'reserved': True, 'tac': 1},
'00102': {'plmn': '00102', 'ranac': 2, 'reserved': False, 'tac': 2},
},
'tdd_ul_dl_config': '2.5ms 1UL 3DL 2/10',
}
gnb_param_dict2 = {
'nssai': {
'0x171717': {'sd': '0x171717', 'sst': 10},
'0x181818': {'sd': '0x181818', 'sst': 20},
},
'tdd_ul_dl_config': '2.5ms 1UL 3DL 2/10',
}
enb_param_dict.update(param_dict)
gnb_param_dict1.update(param_dict)
gnb_param_dict2.update(param_dict)
def test_enb_conf(self):
conf_file = glob.glob(os.path.join(
self.slap.instance_directory, '*', 'etc', 'enb.cfg'))[0]
with open(conf_file, 'r') as f:
conf = yaml.load(f)
if 'tx_gain' in conf and 'rx_gain' in conf:
self.assertEqual(conf['tx_gain'], enb_param_dict['tx_gain'])
self.assertEqual(conf['rx_gain'], enb_param_dict['rx_gain'])
self.assertEqual(conf['cell_default']['inactivity_timer'], enb_param_dict['inactivity_timer'])
self.assertEqual(conf['cell_default']['uldl_config'], 6)
self.assertEqual(conf['cell_list'][0]['dl_earfcn'], enb_param_dict['dl_earfcn'])
self.assertEqual(conf['enb_id'], int(enb_param_dict['enb_id'], 16))
self.assertEqual(conf['cell_list'][0]['n_id_cell'], enb_param_dict['pci'])
self.assertEqual(conf['cell_list'][0]['tac'], int(enb_param_dict['tac'], 16))
self.assertEqual(conf['cell_list'][0]['root_sequence_index'], int(enb_param_dict['root_sequence_index']))
self.assertEqual(conf['cell_list'][0]['cell_id'], 0)
for p in conf['cell_default']['plmn_list']:
for n in "plmn attach_without_pdn reserved".split():
self.assertEqual(p[n], enb_param_dict['plmn_list'][p['plmn']][n])
for p in conf['mme_list']:
self.assertEqual(p['mme_addr'], enb_param_dict['mme_list'][p['mme_addr']]['mme_addr'])
for p in conf['cell_list'][0]['ncell_list']:
for k in enb_param_dict['ncell_list']:
if p['dl_earfcn'] == gnb_param_dict1['ncell_list'][k]['dl_earfcn']:
break
conf_ncell = enb_param_dict['ncell_list'][k]
self.assertEqual(p['dl_earfcn'], conf_ncell['dl_earfcn'])
self.assertEqual(p['n_id_cell'], conf_ncell['pci'])
self.assertEqual(p['cell_id'], int(conf_ncell['cell_id'], 16))
self.assertEqual(p['tac'], conf_ncell['tac'])
with open(conf_file, 'r') as f:
for l in f:
if l.startswith('#define N_RB_DL'):
self.assertIn('50', l)
def test_gnb_conf1(self):
conf_file = glob.glob(os.path.join(
self.slap.instance_directory, '*', 'etc', 'gnb.cfg'))[0]
with open(conf_file, 'r') as f:
conf = yaml.load(f)
self.assertEqual(conf['tx_gain'], gnb_param_dict1['tx_gain'])
self.assertEqual(conf['rx_gain'], gnb_param_dict1['rx_gain'])
self.assertEqual(conf['nr_cell_default']['inactivity_timer'], gnb_param_dict1['inactivity_timer'])
self.assertEqual(conf['nr_cell_list'][0]['dl_nr_arfcn'], gnb_param_dict1['dl_nr_arfcn'])
self.assertEqual(conf['nr_cell_list'][0]['band'], gnb_param_dict1['nr_band'])
self.assertEqual(conf['nr_cell_list'][0]['ssb_pos_bitmap'], gnb_param_dict1['ssb_pos_bitmap'])
self.assertEqual(conf['nr_cell_default']['n_id_cell'], gnb_param_dict1['pci'])
self.assertEqual(conf['gnb_id'], int(gnb_param_dict1['gnb_id'], 16))
self.assertEqual(conf['gnb_id_bits'], gnb_param_dict1['gnb_id_bits'])
for p in conf['nr_cell_default']['plmn_list']:
for n in "plmn ranac reserved tac".split():
self.assertEqual(p[n], gnb_param_dict1['plmn_list'][p['plmn']][n])
for p in conf['amf_list']:
self.assertEqual(p['amf_addr'], gnb_param_dict1['amf_list'][p['amf_addr']]['amf_addr'])
for p in conf['xn_peers']:
self.assertEqual(p, gnb_param_dict1['xn_peers'][p]['xn_addr'])
for p in conf['nr_cell_list'][0]['ncell_list']:
for k in gnb_param_dict1['ncell_list']:
if p['dl_nr_arfcn'] == gnb_param_dict1['ncell_list'][k]['dl_nr_arfcn']:
break
conf_ncell = gnb_param_dict1['ncell_list'][k]
self.assertEqual(p['dl_nr_arfcn'], conf_ncell['dl_nr_arfcn'])
self.assertEqual(p['ssb_nr_arfcn'], conf_ncell['ssb_nr_arfcn'])
self.assertEqual(p['ul_nr_arfcn'], conf_ncell['dl_nr_arfcn'])
self.assertEqual(p['n_id_cell'], conf_ncell['pci'])
self.assertEqual(p['gnb_id_bits'], conf_ncell['gnb_id_bits'])
self.assertEqual(p['nr_cell_id'], int(conf_ncell['nr_cell_id'], 16))
self.assertEqual(p['tac'], conf_ncell['tac'])
self.assertEqual(p['band'], conf_ncell['nr_band'])
tdd_config = conf['nr_cell_default']['tdd_ul_dl_config']['pattern1']
self.assertEqual(float(tdd_config['period']), 2.5)
self.assertEqual(int(tdd_config['dl_slots']), 3)
self.assertEqual(int(tdd_config['dl_symbols']), 10)
self.assertEqual(int(tdd_config['ul_slots']), 1)
self.assertEqual(int(tdd_config['ul_symbols']), 2)
with open(conf_file, 'r') as f:
for l in f:
if l.startswith('#define NR_BANDWIDTH'):
self.assertIn(str(gnb_param_dict1['nr_bandwidth']), l)
def test_gnb_conf2(self):
conf_file = glob.glob(os.path.join(
self.slap.instance_directory, '*', 'etc', 'gnb.cfg'))[0]
with open(conf_file, 'r') as f:
conf = yaml.load(f)
for p in conf['nr_cell_default']['plmn_list'][0]['nssai']:
sd = hex(p['sd'])
self.assertEqual(sd, gnb_param_dict2['nssai'][sd]['sd'], 16)
self.assertEqual(p['sst'], gnb_param_dict2['nssai'][sd]['sst'])
def test_mme_conf(self):
conf_file = glob.glob(os.path.join(
self.slap.instance_directory, '*', 'etc', 'mme.cfg'))[0]
with open(conf_file, 'r') as f:
conf = yaml.load(f)
self.assertEqual(conf['plmn'], param_dict['core_network_plmn'])
def test_sim_card(self):
conf_file = glob.glob(os.path.join(
self.slap.instance_directory, '*', 'etc', 'ue_db.cfg'))[0]
with open(conf_file, 'r') as f:
conf = yaml.load(f)
for n in "sim_algo imsi opc sqn impu impi".split():
self.assertEqual(conf['ue_db'][0][n], param_dict[n])
self.assertEqual(conf['ue_db'][0]['K'], param_dict['k'])
self.assertEqual(conf['ue_db'][0]['amf'], int(param_dict['amf'], 16))
p = self.requestSlaveInstance().getConnectionParameterDict()
p = p['_'] if '_' in p else p
self.assertIn('info', p)
def test_monitor_gadget_url(self):
parameters = json.loads(self.computer_partition.getConnectionParameterDict()['_'])
self.assertIn('monitor-gadget-url', parameters)
monitor_setup_url = parameters['monitor-setup-url']
monitor_gadget_url = parameters['monitor-gadget-url']
monitor_base_url = parameters['monitor-base-url']
public_url = monitor_base_url + '/public'
response = requests.get(public_url, verify=False)
self.assertEqual(requests.codes['OK'], response.status_code)
self.assertIn('software.cfg.html', monitor_gadget_url)
response = requests.get(monitor_gadget_url, verify=False)
self.assertEqual(requests.codes['OK'], response.status_code)
self.assertIn('<script src="rsvp.js"></script>', response.text)
self.assertIn('<script src="renderjs.js"></script>', response.text)
self.assertIn('<script src="g-chart.line.js"></script>', response.text)
self.assertIn('<script src="promise.gadget.js"></script>', response.text)
class TestENBParameters(ORSTestCase):
@classmethod
def getInstanceParameterDict(cls):
return {'_': json.dumps(enb_param_dict)}
@classmethod
def getInstanceSoftwareType(cls):
return "enb"
def test_enb_conf(self):
test_enb_conf(self)
class TestGNBParameters1(ORSTestCase):
@classmethod
def getInstanceParameterDict(cls):
return {'_': json.dumps(gnb_param_dict1)}
@classmethod
def getInstanceSoftwareType(cls):
return "gnb"
def test_gnb_conf(self):
test_gnb_conf1(self)
class TestGNBParameters2(ORSTestCase):
@classmethod
def getInstanceParameterDict(cls):
return {'_': json.dumps(gnb_param_dict2)}
@classmethod
def getInstanceSoftwareType(cls):
return "gnb"
def test_gnb_conf(self):
test_gnb_conf2(self)
class TestCoreNetworkParameters(ORSTestCase):
@classmethod
def getInstanceParameterDict(cls):
return {'_': json.dumps(param_dict)}
@classmethod
def getInstanceSoftwareType(cls):
return "core-network"
def test_mme_conf(self):
test_mme_conf(self)
def requestSlaveInstance(cls):
software_url = cls.getSoftwareURL()
return cls.slap.request(
software_release=software_url,
partition_reference="SIM-CARD",
partition_parameter_kw={'_': json.dumps(param_dict)},
shared=True,
software_type='core-network',
)
class TestENBMonitorGadgetUrl(ORSTestCase):
@classmethod
def getInstanceParameterDict(cls):
return {'_': json.dumps(enb_param_dict)}
@classmethod
def getInstanceSoftwareType(cls):
return "enb"
def test_monitor_gadget_url(self):
test_monitor_gadget_url(self)
class TestGNBMonitorGadgetUrl(ORSTestCase):
@classmethod
def getInstanceParameterDict(cls):
return {'_': json.dumps(gnb_param_dict1)}
@classmethod
def getInstanceSoftwareType(cls):
return "gnb"
def test_monitor_gadget_url(self):
test_monitor_gadget_url(self)
class TestCoreNetworkMonitorGadgetUrl(ORSTestCase):
@classmethod
def getInstanceParameterDict(cls):
return {'_': json.dumps({'testing': True, 'slave-list': []})}
@classmethod
def getInstanceSoftwareType(cls):
return "core-network"
def test_monitor_gadget_url(self):
test_monitor_gadget_url(self)
class TestUELTEMonitorGadgetUrl(ORSTestCase):
@classmethod
def getInstanceParameterDict(cls):
return {'_': json.dumps({'testing': True})}
@classmethod
def getInstanceSoftwareType(cls):
return "ue-lte"
def test_monitor_gadget_url(self):
test_monitor_gadget_url(self)
class TestUENRMonitorGadgetUrl(ORSTestCase):
@classmethod
def getInstanceParameterDict(cls):
return {'_': json.dumps({'testing': True})}
@classmethod
def getInstanceSoftwareType(cls):
return "ue-nr"
def test_monitor_gadget_url(self):
test_monitor_gadget_url(self)
class TestSimCard(ORSTestCase):
@classmethod
def requestDefaultInstance(cls, state='started'):
default_instance = super(
ORSTestCase, cls).requestDefaultInstance(state=state)
cls.requestSlaveInstance()
return default_instance
@classmethod
def requestSlaveInstance(cls):
return requestSlaveInstance(cls)
@classmethod
def getInstanceParameterDict(cls):
return {'_': json.dumps({'testing': True})}
@classmethod
def getInstanceSoftwareType(cls):
return "core-network"
def test_sim_card(self):
test_sim_card(self)
class TestUELTEParameters(ORSTestCase):
@classmethod
def getInstanceParameterDict(cls):
return {'_': json.dumps(param_dict)}
@classmethod
def getInstanceSoftwareType(cls):
return "ue-lte"
def test_ue_lte_conf(self):
conf_file = glob.glob(os.path.join(
self.slap.instance_directory, '*', 'etc', 'ue.cfg'))[0]
with open(conf_file, 'r') as f:
conf = yaml.load(f)
self.assertEqual(conf['cell_groups'][0]['cells'][0]['dl_earfcn'], param_dict['dl_earfcn'])
self.assertEqual(conf['cell_groups'][0]['cells'][0]['n_antenna_dl'], param_dict['n_antenna_dl'])
self.assertEqual(conf['cell_groups'][0]['cells'][0]['n_antenna_ul'], param_dict['n_antenna_ul'])
self.assertEqual(conf['ue_list'][0]['rue_addr'], param_dict['rue_addr'])
self.assertEqual(conf['ue_list'][0]['imsi'], param_dict['imsi'])
self.assertEqual(conf['ue_list'][0]['K'], param_dict['k'])
self.assertEqual(conf['ue_list'][0]['sim_algo'], param_dict['sim_algo'])
self.assertEqual(conf['ue_list'][0]['opc'], param_dict['opc'])
self.assertEqual(conf['ue_list'][0]['amf'], int(param_dict['amf'], 16))
self.assertEqual(conf['ue_list'][0]['sqn'], param_dict['sqn'])
self.assertEqual(conf['ue_list'][0]['impu'], param_dict['impu'])
self.assertEqual(conf['ue_list'][0]['impi'], param_dict['impi'])
self.assertEqual(conf['tx_gain'], param_dict['tx_gain'])
self.assertEqual(conf['rx_gain'], param_dict['rx_gain'])
with open(conf_file, 'r') as f:
for l in f:
if l.startswith('#define N_RB_DL'):
self.assertIn('50', l)
class TestUENRParameters(ORSTestCase):
@classmethod
def getInstanceParameterDict(cls):
return {'_': json.dumps(param_dict)}
@classmethod
def getInstanceSoftwareType(cls):
return "ue-nr"
def test_ue_nr_conf(self):
conf_file = glob.glob(os.path.join(
self.slap.instance_directory, '*', 'etc', 'ue.cfg'))[0]
with open(conf_file, 'r') as f:
conf = yaml.load(f)
self.assertEqual(conf['cell_groups'][0]['cells'][0]['ssb_nr_arfcn'], param_dict['ssb_nr_arfcn'])
self.assertEqual(conf['cell_groups'][0]['cells'][0]['dl_nr_arfcn'], param_dict['dl_nr_arfcn'])
self.assertEqual(conf['cell_groups'][0]['cells'][0]['bandwidth'], '10 MHz')
self.assertEqual(conf['cell_groups'][0]['cells'][0]['band'], param_dict['nr_band'])
self.assertEqual(conf['cell_groups'][0]['cells'][0]['n_antenna_dl'], param_dict['n_antenna_dl'])
self.assertEqual(conf['cell_groups'][0]['cells'][0]['n_antenna_ul'], param_dict['n_antenna_ul'])
self.assertEqual(conf['ue_list'][0]['rue_addr'], param_dict['rue_addr'])
self.assertEqual(conf['ue_list'][0]['imsi'], param_dict['imsi'])
self.assertEqual(conf['ue_list'][0]['K'], param_dict['k'])
self.assertEqual(conf['ue_list'][0]['sim_algo'], param_dict['sim_algo'])
self.assertEqual(conf['ue_list'][0]['opc'], param_dict['opc'])
self.assertEqual(conf['ue_list'][0]['amf'], int(param_dict['amf'], 16))
self.assertEqual(conf['ue_list'][0]['sqn'], param_dict['sqn'])
self.assertEqual(conf['ue_list'][0]['impu'], param_dict['impu'])
self.assertEqual(conf['ue_list'][0]['impi'], param_dict['impi'])
self.assertEqual(conf['tx_gain'], param_dict['tx_gain'])
self.assertEqual(conf['rx_gain'], param_dict['rx_gain'])
software/ors-amarisoft/test/testTDD.py deleted 100644 → 0
View file @ 8baf732e
##############################################################################
#
# Copyright (c) 2018 Nexedi SA and Contributors. All Rights Reserved.
#
# WARNING: This program as such is intended to be used by professional
# programmers who take the whole responsibility of assessing all potential
# consequences resulting from its eventual inadequacies and bugs
# End users who are looking for a ready-to-use solution with commercial
# guarantees and support are strongly adviced to contract a Free Software
# Service Company
#
# This program is Free Software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 3
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
##############################################################################
import os
import yaml
import json
import glob
import requests
from slapos.testing.testcase import makeModuleSetUpAndTestCaseClass
setUpModule, ORSTestCase = makeModuleSetUpAndTestCaseClass(
os.path.abspath(
os.path.join(os.path.dirname(__file__), '..', 'software-tdd.cfg')))
param_dict = {
'testing': True,
'sim_algo': 'milenage',
'imsi': '001010000000331',
'opc': '000102030405060708090A0B0C0D0E0F',
'amf': '0x9001',
'sqn': '000000000000',
'k': '00112233445566778899AABBCCDDEEFF',
'impu': 'impu331',
'impi': 'impi331@amarisoft.com',
'tx_gain': 17,
'rx_gain': 17,
'dl_earfcn': 325320,
'bandwidth': "10 MHz",
'enb_id': '0x17',
'pci': 250,
'tac': '0x1717',
'root_sequence_index': '1',
'mme_list': {
'10.0.0.1': {'mme_addr': '10.0.0.1'},
'2001:db8::1': {'mme_addr': '2001:db8::1'},
},
'core_network_plmn': '00102',
'dl_nr_arfcn': 325320,
'nr_band': 99,
'nr_bandwidth': 50,
'ssb_nr_arfcn': 377790,
'rue_addr': '192.168.99.88',
'n_antenna_dl': 2,
'n_antenna_ul': 2,
'inactivity_timer': 17,
'gnb_id': '0x17',
'gnb_id_bits': 30,
'ssb_pos_bitmap': '10',
'amf_list': {
'10.0.0.1': {'amf_addr': '10.0.0.1'},
'2001:db8::1': {'amf_addr': '2001:db8::1'},
},
'nr_handover_time_to_trigger': 40,
'nr_handover_a3_offset': 10,
'ncell_list': {
'ORS1': {
'dl_earfcn': 100000,
'dl_nr_arfcn': 100000,
'ssb_nr_arfcn': 100000,
'pci': 1,
'nr_cell_id': '0x0000001',
'cell_id': '0x0000001',
'gnb_id_bits': 28,
'nr_band': 1,
'tac': 1
},
'ORS2': {
'dl_earfcn': 200000,
'dl_nr_arfcn': 200000,
'ssb_nr_arfcn': 200000,
'pci': 2,
'nr_cell_id': '0x0000002',
'cell_id': '0x0000001',
'gnb_id_bits': 30,
'nr_band': 2,
'tac': 2
},
},
'xn_peers': {
'2001:db8::1': {
'xn_addr': '2001:db8::1',
},
'2001:db8::2': {
'xn_addr': '2001:db8::2',
},
},
}
enb_param_dict = {
'plmn_list': {
'00101': {'attach_without_pdn': True, 'plmn': '00101', 'reserved': True},
'00102': {'attach_without_pdn': False, 'plmn': '00102', 'reserved': False},
},
'tdd_ul_dl_config': '[Configuration 6] 5ms 5UL 3DL (maximum uplink)',
}
gnb_param_dict1 = {
'plmn_list': {
'00101': {'plmn': '00101', 'ranac': 1, 'reserved': True, 'tac': 1},
'00102': {'plmn': '00102', 'ranac': 2, 'reserved': False, 'tac': 2},
},
'tdd_ul_dl_config': '2.5ms 1UL 3DL 2/10',
}
gnb_param_dict2 = {
'nssai': {
'0x171717': {'sd': '0x171717', 'sst': 10},
'0x181818': {'sd': '0x181818', 'sst': 20},
},
'tdd_ul_dl_config': '2.5ms 1UL 3DL 2/10',
}
enb_param_dict.update(param_dict)
gnb_param_dict1.update(param_dict)
gnb_param_dict2.update(param_dict)
def test_enb_conf(self):
conf_file = glob.glob(os.path.join(
self.slap.instance_directory, '*', 'etc', 'enb.cfg'))[0]
with open(conf_file, 'r') as f:
conf = yaml.load(f)
if 'tx_gain' in conf and 'rx_gain' in conf:
self.assertEqual(conf['tx_gain'], enb_param_dict['tx_gain'])
self.assertEqual(conf['rx_gain'], enb_param_dict['rx_gain'])
self.assertEqual(conf['cell_default']['inactivity_timer'], enb_param_dict['inactivity_timer'])
self.assertEqual(conf['cell_default']['uldl_config'], 6)
self.assertEqual(conf['cell_list'][0]['dl_earfcn'], enb_param_dict['dl_earfcn'])
self.assertEqual(conf['enb_id'], int(enb_param_dict['enb_id'], 16))
self.assertEqual(conf['cell_list'][0]['n_id_cell'], enb_param_dict['pci'])
self.assertEqual(conf['cell_list'][0]['tac'], int(enb_param_dict['tac'], 16))
self.assertEqual(conf['cell_list'][0]['root_sequence_index'], int(enb_param_dict['root_sequence_index']))
self.assertEqual(conf['cell_list'][0]['cell_id'], 0)
for p in conf['cell_default']['plmn_list']:
for n in "plmn attach_without_pdn reserved".split():
self.assertEqual(p[n], enb_param_dict['plmn_list'][p['plmn']][n])
for p in conf['mme_list']:
self.assertEqual(p['mme_addr'], enb_param_dict['mme_list'][p['mme_addr']]['mme_addr'])
for p in conf['cell_list'][0]['ncell_list']:
for k in enb_param_dict['ncell_list']:
if p['dl_earfcn'] == gnb_param_dict1['ncell_list'][k]['dl_earfcn']:
break
conf_ncell = enb_param_dict['ncell_list'][k]
self.assertEqual(p['dl_earfcn'], conf_ncell['dl_earfcn'])
self.assertEqual(p['n_id_cell'], conf_ncell['pci'])
self.assertEqual(p['cell_id'], int(conf_ncell['cell_id'], 16))
self.assertEqual(p['tac'], conf_ncell['tac'])
with open(conf_file, 'r') as f:
for l in f:
if l.startswith('#define N_RB_DL'):
self.assertIn('50', l)
def test_gnb_conf1(self):
conf_file = glob.glob(os.path.join(
self.slap.instance_directory, '*', 'etc', 'gnb.cfg'))[0]
with open(conf_file, 'r') as f:
conf = yaml.load(f)
self.assertEqual(conf['tx_gain'], gnb_param_dict1['tx_gain'])
self.assertEqual(conf['rx_gain'], gnb_param_dict1['rx_gain'])
self.assertEqual(conf['nr_cell_default']['inactivity_timer'], gnb_param_dict1['inactivity_timer'])
self.assertEqual(conf['nr_cell_list'][0]['dl_nr_arfcn'], gnb_param_dict1['dl_nr_arfcn'])
self.assertEqual(conf['nr_cell_list'][0]['band'], gnb_param_dict1['nr_band'])
self.assertEqual(conf['nr_cell_list'][0]['ssb_pos_bitmap'], gnb_param_dict1['ssb_pos_bitmap'])
self.assertEqual(conf['nr_cell_default']['n_id_cell'], gnb_param_dict1['pci'])
self.assertEqual(conf['gnb_id'], int(gnb_param_dict1['gnb_id'], 16))
self.assertEqual(conf['gnb_id_bits'], gnb_param_dict1['gnb_id_bits'])
for p in conf['nr_cell_default']['plmn_list']:
for n in "plmn ranac reserved tac".split():
self.assertEqual(p[n], gnb_param_dict1['plmn_list'][p['plmn']][n])
for p in conf['amf_list']:
self.assertEqual(p['amf_addr'], gnb_param_dict1['amf_list'][p['amf_addr']]['amf_addr'])
for p in conf['xn_peers']:
self.assertEqual(p, gnb_param_dict1['xn_peers'][p]['xn_addr'])
for p in conf['nr_cell_list'][0]['ncell_list']:
for k in gnb_param_dict1['ncell_list']:
if p['dl_nr_arfcn'] == gnb_param_dict1['ncell_list'][k]['dl_nr_arfcn']:
break
conf_ncell = gnb_param_dict1['ncell_list'][k]
self.assertEqual(p['dl_nr_arfcn'], conf_ncell['dl_nr_arfcn'])
self.assertEqual(p['ssb_nr_arfcn'], conf_ncell['ssb_nr_arfcn'])
self.assertEqual(p['ul_nr_arfcn'], conf_ncell['dl_nr_arfcn'])
self.assertEqual(p['n_id_cell'], conf_ncell['pci'])
self.assertEqual(p['gnb_id_bits'], conf_ncell['gnb_id_bits'])
self.assertEqual(p['nr_cell_id'], int(conf_ncell['nr_cell_id'], 16))
self.assertEqual(p['tac'], conf_ncell['tac'])
self.assertEqual(p['band'], conf_ncell['nr_band'])
tdd_config = conf['nr_cell_default']['tdd_ul_dl_config']['pattern1']
self.assertEqual(float(tdd_config['period']), 2.5)
self.assertEqual(int(tdd_config['dl_slots']), 3)
self.assertEqual(int(tdd_config['dl_symbols']), 10)
self.assertEqual(int(tdd_config['ul_slots']), 1)
self.assertEqual(int(tdd_config['ul_symbols']), 2)
with open(conf_file, 'r') as f:
for l in f:
if l.startswith('#define NR_BANDWIDTH'):
self.assertIn(str(gnb_param_dict1['nr_bandwidth']), l)
def test_gnb_conf2(self):
conf_file = glob.glob(os.path.join(
self.slap.instance_directory, '*', 'etc', 'gnb.cfg'))[0]
with open(conf_file, 'r') as f:
conf = yaml.load(f)
for p in conf['nr_cell_default']['plmn_list'][0]['nssai']:
sd = hex(p['sd'])
self.assertEqual(sd, gnb_param_dict2['nssai'][sd]['sd'], 16)
self.assertEqual(p['sst'], gnb_param_dict2['nssai'][sd]['sst'])
def test_mme_conf(self):
conf_file = glob.glob(os.path.join(
self.slap.instance_directory, '*', 'etc', 'mme.cfg'))[0]
with open(conf_file, 'r') as f:
conf = yaml.load(f)
self.assertEqual(conf['plmn'], param_dict['core_network_plmn'])
def test_sim_card(self):
conf_file = glob.glob(os.path.join(
self.slap.instance_directory, '*', 'etc', 'ue_db.cfg'))[0]
with open(conf_file, 'r') as f:
conf = yaml.load(f)
for n in "sim_algo imsi opc sqn impu impi".split():
self.assertEqual(conf['ue_db'][0][n], param_dict[n])
self.assertEqual(conf['ue_db'][0]['K'], param_dict['k'])
self.assertEqual(conf['ue_db'][0]['amf'], int(param_dict['amf'], 16))
p = self.requestSlaveInstance().getConnectionParameterDict()
p = p['_'] if '_' in p else p
self.assertIn('info', p)
def test_monitor_gadget_url(self):
parameters = json.loads(self.computer_partition.getConnectionParameterDict()['_'])
self.assertIn('monitor-gadget-url', parameters)
monitor_setup_url = parameters['monitor-setup-url']
monitor_gadget_url = parameters['monitor-gadget-url']
monitor_base_url = parameters['monitor-base-url']
public_url = monitor_base_url + '/public'
response = requests.get(public_url, verify=False)
self.assertEqual(requests.codes['OK'], response.status_code)
self.assertIn('software.cfg.html', monitor_gadget_url)
response = requests.get(monitor_gadget_url, verify=False)
self.assertEqual(requests.codes['OK'], response.status_code)
self.assertIn('<script src="rsvp.js"></script>', response.text)
self.assertIn('<script src="renderjs.js"></script>', response.text)
self.assertIn('<script src="g-chart.line.js"></script>', response.text)
self.assertIn('<script src="promise.gadget.js"></script>', response.text)
class TestENBParameters(ORSTestCase):
@classmethod
def getInstanceParameterDict(cls):
return {'_': json.dumps(enb_param_dict)}
@classmethod
def getInstanceSoftwareType(cls):
return "enb"
def test_enb_conf(self):
test_enb_conf(self)
class TestGNBParameters1(ORSTestCase):
@classmethod
def getInstanceParameterDict(cls):
return {'_': json.dumps(gnb_param_dict1)}
@classmethod
def getInstanceSoftwareType(cls):
return "gnb"
def test_gnb_conf(self):
test_gnb_conf1(self)
class TestGNBParameters2(ORSTestCase):
@classmethod
def getInstanceParameterDict(cls):
return {'_': json.dumps(gnb_param_dict2)}
@classmethod
def getInstanceSoftwareType(cls):
return "gnb"
def test_gnb_conf(self):
test_gnb_conf2(self)
class TestCoreNetworkParameters(ORSTestCase):
@classmethod
def getInstanceParameterDict(cls):
return {'_': json.dumps(param_dict)}
@classmethod
def getInstanceSoftwareType(cls):
return "core-network"
def test_mme_conf(self):
test_mme_conf(self)
def requestSlaveInstance(cls):
software_url = cls.getSoftwareURL()
return cls.slap.request(
software_release=software_url,
partition_reference="SIM-CARD",
partition_parameter_kw={'_': json.dumps(param_dict)},
shared=True,
software_type='core-network',
)
class TestENBMonitorGadgetUrl(ORSTestCase):
@classmethod
def getInstanceParameterDict(cls):
return {'_': json.dumps(enb_param_dict)}
@classmethod
def getInstanceSoftwareType(cls):
return "enb"
def test_monitor_gadget_url(self):
test_monitor_gadget_url(self)
class TestGNBMonitorGadgetUrl(ORSTestCase):
@classmethod
def getInstanceParameterDict(cls):
return {'_': json.dumps(gnb_param_dict1)}
@classmethod
def getInstanceSoftwareType(cls):
return "gnb"
def test_monitor_gadget_url(self):
test_monitor_gadget_url(self)
class TestCoreNetworkMonitorGadgetUrl(ORSTestCase):
@classmethod
def getInstanceParameterDict(cls):
return {'_': json.dumps({'testing': True, 'slave-list': []})}
@classmethod
def getInstanceSoftwareType(cls):
return "core-network"
def test_monitor_gadget_url(self):
test_monitor_gadget_url(self)
class TestUELTEMonitorGadgetUrl(ORSTestCase):
@classmethod
def getInstanceParameterDict(cls):
return {'_': json.dumps({'testing': True})}
@classmethod
def getInstanceSoftwareType(cls):
return "ue-lte"
def test_monitor_gadget_url(self):
test_monitor_gadget_url(self)
class TestUENRMonitorGadgetUrl(ORSTestCase):
@classmethod
def getInstanceParameterDict(cls):
return {'_': json.dumps({'testing': True})}
@classmethod
def getInstanceSoftwareType(cls):
return "ue-nr"
def test_monitor_gadget_url(self):
test_monitor_gadget_url(self)
class TestSimCard(ORSTestCase):
@classmethod
def requestDefaultInstance(cls, state='started'):
default_instance = super(
ORSTestCase, cls).requestDefaultInstance(state=state)
cls.requestSlaveInstance()
return default_instance
@classmethod
def requestSlaveInstance(cls):
return requestSlaveInstance(cls)
@classmethod
def getInstanceParameterDict(cls):
return {'_': json.dumps({'testing': True})}
@classmethod
def getInstanceSoftwareType(cls):
return "core-network"
def test_sim_card(self):
test_sim_card(self)
class TestUELTEParameters(ORSTestCase):
@classmethod
def getInstanceParameterDict(cls):
return {'_': json.dumps(param_dict)}
@classmethod
def getInstanceSoftwareType(cls):
return "ue-lte"
def test_ue_lte_conf(self):
conf_file = glob.glob(os.path.join(
self.slap.instance_directory, '*', 'etc', 'ue.cfg'))[0]
with open(conf_file, 'r') as f:
conf = yaml.load(f)
self.assertEqual(conf['cell_groups'][0]['cells'][0]['dl_earfcn'], param_dict['dl_earfcn'])
self.assertEqual(conf['cell_groups'][0]['cells'][0]['n_antenna_dl'], param_dict['n_antenna_dl'])
self.assertEqual(conf['cell_groups'][0]['cells'][0]['n_antenna_ul'], param_dict['n_antenna_ul'])
self.assertEqual(conf['ue_list'][0]['rue_addr'], param_dict['rue_addr'])
self.assertEqual(conf['ue_list'][0]['imsi'], param_dict['imsi'])
self.assertEqual(conf['ue_list'][0]['K'], param_dict['k'])
self.assertEqual(conf['ue_list'][0]['sim_algo'], param_dict['sim_algo'])
self.assertEqual(conf['ue_list'][0]['opc'], param_dict['opc'])
self.assertEqual(conf['ue_list'][0]['amf'], int(param_dict['amf'], 16))
self.assertEqual(conf['ue_list'][0]['sqn'], param_dict['sqn'])
self.assertEqual(conf['ue_list'][0]['impu'], param_dict['impu'])
self.assertEqual(conf['ue_list'][0]['impi'], param_dict['impi'])
self.assertEqual(conf['tx_gain'], param_dict['tx_gain'])
self.assertEqual(conf['rx_gain'], param_dict['rx_gain'])
with open(conf_file, 'r') as f:
for l in f:
if l.startswith('#define N_RB_DL'):
self.assertIn('50', l)
class TestUENRParameters(ORSTestCase):
@classmethod
def getInstanceParameterDict(cls):
return {'_': json.dumps(param_dict)}
@classmethod
def getInstanceSoftwareType(cls):
return "ue-nr"
def test_ue_nr_conf(self):
conf_file = glob.glob(os.path.join(
self.slap.instance_directory, '*', 'etc', 'ue.cfg'))[0]
with open(conf_file, 'r') as f:
conf = yaml.load(f)
self.assertEqual(conf['cell_groups'][0]['cells'][0]['ssb_nr_arfcn'], param_dict['ssb_nr_arfcn'])
self.assertEqual(conf['cell_groups'][0]['cells'][0]['dl_nr_arfcn'], param_dict['dl_nr_arfcn'])
self.assertEqual(conf['cell_groups'][0]['cells'][0]['bandwidth'], '10 MHz')
self.assertEqual(conf['cell_groups'][0]['cells'][0]['band'], param_dict['nr_band'])
self.assertEqual(conf['cell_groups'][0]['cells'][0]['n_antenna_dl'], param_dict['n_antenna_dl'])
self.assertEqual(conf['cell_groups'][0]['cells'][0]['n_antenna_ul'], param_dict['n_antenna_ul'])
self.assertEqual(conf['ue_list'][0]['rue_addr'], param_dict['rue_addr'])
self.assertEqual(conf['ue_list'][0]['imsi'], param_dict['imsi'])
self.assertEqual(conf['ue_list'][0]['K'], param_dict['k'])
self.assertEqual(conf['ue_list'][0]['sim_algo'], param_dict['sim_algo'])
self.assertEqual(conf['ue_list'][0]['opc'], param_dict['opc'])
self.assertEqual(conf['ue_list'][0]['amf'], int(param_dict['amf'], 16))
self.assertEqual(conf['ue_list'][0]['sqn'], param_dict['sqn'])
self.assertEqual(conf['ue_list'][0]['impu'], param_dict['impu'])
self.assertEqual(conf['ue_list'][0]['impi'], param_dict['impi'])
self.assertEqual(conf['tx_gain'], param_dict['tx_gain'])
self.assertEqual(conf['rx_gain'], param_dict['rx_gain'])
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7