amari.drb: Start of the package

This package will be used to implement E-UTRAN IP Throughput KPI.

In hereby patch we add `drb.Sampler` that extracts samples of
transmission bursts from `ue_get[stats]` observations.

Let's go through what E-UTRAN IP Throughput KPI is and how it motivates
functionality provided by this patch.

Overview of E-UTRAN IP Throughput computation
---------------------------------------------

This KPI is defined in TS 32.450 [1] and aggregates transmission volume and
time over bursts of transmissions from an average UE point of view. It should be
particularly noted that only the time, during which transmission is going on,
should be accounted. For example if an UE receives 10KB over 4ms burst and the rest of
the time there is no transmission to it during, say, 1 minute, the downlink IP
Throughput for that UE over the minute is 20Mbit/s (= 8·10KB/4ms), not 1.3Kbit/s (= 8·10KB/60s).
This KPI basically shows what would be the speed to e.g. download a response for
HTTP request issued from a mobile.

[1] https://www.etsi.org/deliver/etsi_ts/132400_132499/132450/16.00.00_60/ts_132450v160000p.pdf#page=13

To compute IP Throughput we thus need to know Σ of transmitted amount
of bytes, and Σ of the time of all transmission bursts.

Σ of the bytes is relatively easy to get. eNB already provides close values in
overall `stats` and in per-UE `ue_get[stats]` messages. However there is no
anything readily available out-of-the box for Σ of bursts transmission time.
Thus we need to measure the time of transmission bursts ourselves somehow.

It turns out that with current state of things the only practical way to
measure it to some degree is to poll eNB frequently with `ue_get[stats]` and
estimate transmission time based on δ of `ue_get` timestamps.

Let's see how frequently we need to poll to get to reasonably accuracy of resulting throughput.

A common situation for HTTP requests issued via LTE is that response content
downloading time takes only few milliseconds. For example I used chromium
network profiler to access various sites via internet tethered from my phone
and saw that for many requests response content downloading time was e.g. 4ms,
5ms, 3.2ms, etc. The accuracy of measuring transmission time should be thus in
the order of millisecond to cover that properly. It makes a real difference for
reported throughput, if say a download sample with 10KB took 4ms, or it took
e.g. "something under 100ms". In the first case we know that for that sample
downlink throughput is 2500KB/s, while in the second case all we know is that
downlink throughput is "higher than 100KB/s" - a 25 times difference and not
certain. Similarly if we poll at 10ms rate we would get that throughput is "higher
than 1000KB/s" - a 2.5 times difference from actual value. The accuracy of 1
millisecond coincides with TTI time and with how downlink/uplink transmissions
generally work in LTE.

With the above the scheme to compute IP Throughput looks to be as
follows: poll eNB at 1000Hz rate for `ue_get[stats]`, process retrieved
information into per-UE and per-QCI streams, detect bursts on each UE/QCI pair,
and aggregate `tx_bytes` and `tx_time` from every burst.

It looks to be straightforward, but 1000Hz polling will likely create
non-negligible additional load on the system and disturb eNB itself
introducing much jitter and harming its latency requirements. That's probably
why eNB actually rate-limits WebSocket requests not to go higher than 100Hz -
the frequency 10 times less compared to what we need to get to reasonable
accuracy for IP throughput.

Fortunately there is additional information that provides a way to improve
accuracy of measured `tx_time` even when polled every 10ms at 100Hz rate:
that additional information is the number of transmitted transport blocks to/from
an UE. If we know that during 10ms frame it was e.g. 4 transport blocks transmitted
to the UE, that there were no retransmissions *and* that eNB is not congested, we can
reasonably estimate that it was actually a 4ms transmission. And if eNB is
congested we can still say that transmission time is somewhere in `[4ms, 10ms]`
interval because transmitting each transport block takes 1 TTI. Even if
imprecise that still provides some information that could be useful.

Also 100Hz polling turns to be acceptable from performance point of view and
does not disturb the system much. For example on the callbox machine the process,
that issues polls, takes only about 3% of CPU load and only on one core, and
the CPU usage of eNB does not practically change and its reported tx/rx latency
does not change as well. For sure, there is some disturbance, but it appears to
be small. To have a better idea of what rate of polling is possible, I've made
an experiment with the poller accessing my own websocket echo server quickly
implemented in python. Both the poller and the echo server are not optimized,
but without rate-limiting they could go to 8000Hz frequency with reaching 100%
CPU usage of one CPU core. That 8000Hz is 80x times more compared to 100Hz
frequency actually allowed by eNB. This shows what kind of polling
frequency limit the system can handle, if absolutely needed, and that 100Hz
turns out to be not so high a frequency. Also the Linux 5.6 kernel, installed
on the callbox from Fedora32, is configured with `CONFIG_HZ=1000`, which is
likely helping here.

Implementation overview
~~~~~~~~~~~~~~~~~~~~~~~

The scheme to compute E-UTRAN IP Throughput is thus as follows: poll eNB at
100Hz frequency for `ue_get[stats]` and retrieve information about per-UE/QCI
streams and the number of transport blocks dl/ul-ed to the UE in question
during that 10ms frame. Estimate `tx_time` taking into account
the number of transmitted transport blocks. And estimate whether eNB is congested or
not based on `dl_use_avg`/`ul_use_avg` taken from `stats`. For the latter we
also need to poll for `stats` at 100Hz frequency and synchronize
`ue_get[stats]` and `stats` requests in time so that they both cover the same
time interval of particular frame.

Then organize the polling process to provide aggregated statistics in the form of
new `x.drb_stats` message, and teach `xamari xlog` to save that messages to
`enb.xlog` together with `stats`.  Then further adjust `amari.kpi.LogMeasure`
and generic `kpi.Measurement` and `kpi.Calc` to handle DRB-related data.

----------------------------------------

In this patch we provide first building block - `Sampler` that extracts bursts
of data transmissions from stream of `ue_get[stats]` observations.

Even though main idea behind `Sampler` is relatively straightforward, several
aspects deserves to be noted:

1. information about transmitted bytes and corresponding transmitted transport
   blocks is emitted by eNB not synchronized in time. The reason here is that,
   for example, for DL a block is transmitted via PDCCH+PDSCH during one TTI, and
   then the base station awaits HARQ ACK/NACK. That ACK/NACK comes later via
   PUCCH or PUSCH. The time window in between original transmission and
   reception of the ACK/NACK is 4 TTIs for FDD and 4-13 TTIs for TDD (*).
   And Amarisoft LTEENB updates counters for dl_total_bytes and dl_tx at
   different times:

       ue.erab.dl_total_bytes      - right after sending data on  PDCCH+PDSCH
       ue.cell.{dl_tx,dl_retx}     - after receiving ACK/NACK via PUCCH|PUSCH

   this way an update to dl_total_bytes might be seen in one frame (= 10·TTI),
   while corresponding update to dl_tx/dl_retx might be seen in either same, or
   next, or next-next frame.

   We bring `δ(tx_bytes)` and `#tx_tb` in sync ourselves via _BitSync.

   (*) see e.g. Figure 8.1 in "An introduction to LTE, 2nd ed."

2. when we see multiple transmissions related to UE on different QCIs, we
   cannot directly use corresponding number of transport blocks to estimate
   transmissions times because we do not know how eNB scheduler placed those
   transmissions onto resource map. So without additional information we can only
   estimate corresponding lower and upper bounds.

README.rst

@@ -5,6 +5,7 @@
 XLTE repository provides assorted tools and packages with functionality related to LTE:
 
 - `kpi` - process measurements and compute KPIs from them.
+- `amari.drb` - infrastructure to process flows on data radio bearers.
 - `amari.kpi` - driver for Amarisoft LTE stack to retrieve KPI-related measurements from logs.
 - `amari.xlog` - extra logging facilities for Amarisoft LTE stack.
 - `xamari` - supplementary tool for managing Amarisoft LTE services.