Commit eab4a41b authored by Kirill Smelkov's avatar Kirill Smelkov

software/ors-amarisoft: enb.jinja2.cfg: Tune PUCCH 1 and PUCCH 3 for CA

When there are multiple cells and CA configured, without those parameters enb fails to start with e.g.

    n1_pucch_an_cs_count must be > 0 for the CA Primary cell

Set them on all cell like illustrated in enb-2cc.cfg and enb-3cc.cfg Amarisoft examples.

Not sure selected values are best - I took them from above mentioned examples as is.

Reference to documentation about those parameters:

https://tech-academy.amarisoft.com/lteenb.doc#prop.pucch_dedicated.n1_pucch_an_cs_count
https://tech-academy.amarisoft.com/lteenb.doc#prop.pucch_dedicated.n3_pucch_an_n_rb
https://tech-academy.amarisoft.com/lteenb.doc#prop.pucch_dedicated.ack_nack_feedback_mode_ca

/cc @lu.xu, @tomo, @xavier_thompson, @Daetalus
/helped-by @jhuge
/reviewed-on !1519
parent 67907147
...@@ -104,7 +104,7 @@ md5sum = dcaac06553a3222b14c0013a13f4a149 ...@@ -104,7 +104,7 @@ md5sum = dcaac06553a3222b14c0013a13f4a149
[enb.jinja2.cfg] [enb.jinja2.cfg]
filename = config/enb.jinja2.cfg filename = config/enb.jinja2.cfg
md5sum = dc19f5362fe0e23ba814da39f7520c15 md5sum = 93a235dbab99cf7c4f3f2759278ecaed
[drb_lte.jinja2.cfg] [drb_lte.jinja2.cfg]
filename = config/drb_lte.jinja2.cfg filename = config/drb_lte.jinja2.cfg
......
...@@ -326,6 +326,15 @@ ...@@ -326,6 +326,15 @@
pucch_dedicated: { pucch_dedicated: {
n1_pucch_sr_count: 11, n1_pucch_sr_count: 11,
cqi_pucch_n_rb: 1, cqi_pucch_n_rb: 1,
{#- for CA with 2 cells it is possible to use PUCCH 1b CS ack/nack #}
{%- if len(cell_list) == 2 %}
ack_nack_feedback_mode_ca: "cs",
n1_pucch_an_cs_count: 8,
{#- starting from 3 cells it is always PUCCH 3 for ack/nack in CA #}
{%- elif len(cell_list) >= 3 %}
ack_nack_feedback_mode_ca: "pucch3",
n3_pucch_an_n_rb: 3,
{%- endif %}
{%- if tdd %} {%- if tdd %}
tdd_ack_nack_feedback_mode: "multiplexing", /* TDD only */ tdd_ack_nack_feedback_mode: "multiplexing", /* TDD only */
{%- endif %} {%- endif %}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment